CommonPath Nurse Call Solution
UPS-100 Uninterruptible Power Supply
Technical Specifications
 Operating Voltage: 120V input @ 50/60 Hz, auto-
sensing, fused at 15 A
 Output: 500VA/300 Watts, modified sine wave
 Dimensions: 6.5”h x 3.6”w x 11.2”d
 Weight: 13.8 pounds
 Recharge Time: 8 hours to rated runtime at
nominal AC input voltage
 Runtime Full Load: 2.4 minutes @ 120V output
UPS-100 is a modified sine wave, off-line
uninterruptible power supply that operates in
both 50 Hz and 60 Hz environments. It is
designed to protect microprocessor based
equipment, and specifically engineered to work
with the switching power supplies found in
computer, communications, and industrial
equipment.
This unit protects the CommonPath™ Nurse Call
System GCAT. A UPS should be put on any piece
of mission critical equipment so that the system
is maintained in the event of a power
interruption.
The UPS-100 is equipped with four NEMA 5-15R
outputs (2 duplex). The unit is furnished with a
maintenance free sealed battery and a DB-9 port
for Power Management Application software
interface.
 Runtime Half Load: 13.9 minutes @ 120V output
 Surge Protection: DSL surge protection
 Environmental: 32 degrees F to 104 degrees F
 Listings: Conforms to UL-1778 and UL-1069 as
tested and listed by ETL and UL Testing
Laboratories, Category 27 for Hospital Signaling
and Nurse Call Equipment
 Storage: 5 degrees F to 113 degrees F
 Humidity: 0 to 95% non-condensing
 Acoustic: Less than 45dBA
 UPS-100 Uninterruptible Power Supply for
GCAT’s, 14-minute hold time at 150 watts
©Copyright 2015 Critical Alert Systems, Inc.
Information contained in this document is proprietary and confidential.
1-888-846-8346
info@criticalalert.com
www.nursecall.com