Product Overview Catalog
AUTOMATION
made
EASY
About Qualitrol
Qualitrol Corporation, a subsidiary of Danaher
Corporation, is the leading global supplier of
instruments, controls, monitors, and data access
systems utilized in the Electric Utility Transmission
and Distribution Industry. Since 1945, we’ve been
the benchmark for standard and custom solutions.
Qualitrol Corporation offers three product
brands: Qualitrol, AKM and Hathaway.
Our Qualitrol and AKM brands incorporate
protection equipment for transformers (oil filled
and dry-type), load tap changers, breakers,
switchgear, and voltage regulators. The product
line includes:
Temperature monitors and indicators
Liquid level monitors and indicators
Pressure relief and relays
SF6 Gas Density Monitors
Qualitrol’s Hathaway brand product line
includes:
Intelligent Electronic Devices (IEDs)
and Electromechanical Devices to protect
transmission and distribution equipment such
as transformers, breakers and voltage regulators.
Digital Fault Recorders
Sequence of Event Recorders and Annunciators
Transmission and Distribution Line
Fault Locators
Data Concentrators—both Remote Terminal
Units (RTUs) and Substation Information
Server Gateways (SIS)
Supervisory Control and Data Acquisition products
Qualitrol brings an expertise in servicing a broad
variety of customer needs to geographic locations
worldwide. We offer a high degree of system
flexibility and creativity yielding solutions that
are customized for your specific application
needs.
So much depends on you and
your equipment, shouldn’t you
depend on the durability and
quality of Qualitrol.
Call us at 585-586-1515
or visit www.qualitrolcorp.com
Table of Contents
Equipment Protection Products
Electronic Products
111-200 Series SCADA-Ready Digital Thermometer
111-300 Series Transformer Temperature Monitor
111-400 Series Digital Differential Temperature Monitor
118 Series Electronic Temperature Monitor
509-100 Transformer Temperature Monitor
509-200 Transformer Cooling Monitor
509-300 Load Tap Changer Monitor
930 Series Electronic Pressure Monitors
Mechanical Temperature Products
4” 150/151 Series Direct-Mount Thermometer
5” 165/167 Series Direct-Mount Thermometer (w/switches)
6” 104 Series Remote-Mounted Mechanical Thermometers
6” 104-400 Series SCADA Output Thermometer
AKM Bi-Metal Contact Thermometers
AKM Oil Temperature Indicator Series 34 (OTI)
AKM Winding Temperature Indicator Series 35 (WTI)
Mechanical Liquid Level/Flow Products
020/030 Series 2” and 3”, Indication-only, Side-mount
Liquid Level Gauges for Distribution Transformers
035 Series 31/2” Liquid Level Gauge w/switches for
Distribution Transformers
042 Series 6” Liquid Level Gauges
AKM Oil Indicator Series 67/69
092 Series Oil Flow Gauges
Pressure Relief Devices (PRD)
201/202 Series Small Pressure Relief Devices
205 Series Medium Pressure Relief Devices
206 Series Medium Pressure Relief Devices
208/216 Large Pressure Relief Devices
Pressure Control Products
050 Series Vacuum Pressure Gauges
351 Pressure Vacuum Bleeder
AKM SF6 Gas Density Monitor
900/910 Series Rapid Pressure Rise Relays
Data Acquisition Products
IDM Data Acquisition System
TWS Traveling Wave Fault Locator
ReplayPlus Analysis Software
BCM 200 Breaker Condition Monitor
CBT 400 Circuit Breaker Test System
RTR 200 Circuit Breaker Response Recorder
GPS Time Synchronizer
Data Access Products
Remote Terminal Units
RMS900
RS8550
IR8600
NR8800
Systems
Substation Information Server (SIS)
DAS 4000 Distribution Automation SCADA
Event Recorders and Annunciators
Betalarm 4
SER4100
Our sales and design engineers work closely with your product
designers to achieve the specific solution for your individual
application needs. And we test them to ensure that they will
endure.
Equipment Protection
Electronic Products
111-200 Series SCADA-Ready Digital Thermometer
The 111-200 economically monitors oil and winding temperatures within
liquid-cooled transformers. Comprised of one or two independent, singlechannel digital thermometers, the 111-200 displays present and maximum
stored temperatures, and provides relays for cooling, alarm, and trip controls.
The 111-200 also offers remote data communication through either milliamp
outputs or RS485 MODBUS protocol.
111-300 Series Transformer
Temperature Monitor
111-300 Series Transformer Temperature Monitor
The 111-300 utilizes microprocessor technology and advanced thermal modeling
to economically monitor oil and winding temperatures within liquid-cooled
transformers. Comprised of one or two independent, single-channel digital
monitors, the 111-300 accurately measures both liquid and winding temperatures
using only one liquid well.
111-400 Series Digital Differential Temperature Monitor
The 111-400 uses two 100ohm Resistance Temperature Detector (RTD) sensors
to measure the oil temperature of the Main tank and the Load Tap Changer
(LTC) tank. The ‘Differential’ Temperature (LTC temperature minus the Main
tank temperature) is calculated and monitored as an indication of the LTC
condition. Multiple-level alarm logic with programmable time constants can
actuate alarms when predetermined differential setpoints are exceeded.
118 Series Electronic
Temperature Monitors
118 Series Electronic Temperature Monitors
The 118 Electronic Temperature Monitor (EMT) can track up to three
ventilated Dry-Type transformer windings. The EMT operates relays by
comparing the highest winding temperature to stored set point temperatures
and displays three thermocouple inputs as well as the stored maximum
temperature and its associated winding. The unit provides Fan, Alarm and
Trip circuitry. The EMT uses digital microprocessor technology, providing
accuracy, automatic calibration and self-diagnostics. Optional RS-485
communications link with MODBUS protocol is available.
509-100 Transformer Temperature Monitor
Combining microprocessor technology and advanced digital signal processing,
the 509-100 accurately assesses the health and performance of the transformer,
and helps extend its life. It can be tailored to suit the application. Starting from
a simple, one-liquid/one-winding Electronic Temperature Monitor (ETM), it
can grow to monitor up to eight total parameters. As an example, a high-end
system could monitor liquid temperature, up to three winding temperatures,
and four additional inputs such as Load Tap Changer (LTC) temperature,
ambient temperature, bottom oil temperature or cooling bank currents.
509-100 Transformer
Temperature Monitor
509-200 Transformer Cooling Monitor
509-200 Transformer
Cooling Monitor
The 509-200 is an Intelligent Electronic Device (IED) that sets the standard
for high quality monitoring of your entire cooling system. We’ve combined
microprocessor technology and advanced digital signal processing to accurately
assess the transformer temperature, the LTC compartment temperature, and
the proper operation of pumps and fans.
! 509-300 Load Tap Changer Monitor
NEW The
509-300 is two monitors in one. It provides all of the advanced thermal
monitoring and temperature control of our 509-100 series. In addition, the
509-300 can determine tap position, create a tap position history, detect contact
wear or coking, monitor the LTC drive motor and mechanism, and detect
proper tap movement alerting you to potential problems and extending the
life of your transformer.
930 Series Electronic Pressure Monitors
509-300 Load Tap
Changer Monitor
The 930 Series Electronic Pressure Monitors are designed for use on
transformer and load tap changer tanks to sense fast or slow pressure increases
and provide alarm and trip functions. A constant milliamp output proportional
to tank pressure is provided for remote indication or for use with SCADA
systems. Fast pressure rise and slow pressure rise settings are field adjustable.
The contacts can be user set for momentary or seal-in actuation. Front
panel LED’s provide visual indication of contact actuation.
Equipment Protection
Mechanical Temperature Products
4" 150/151 Series Direct-Mount Thermometer
This thermometer series is used where only temperature indication is required,
and where the sensor and indication are both near eye-level. These
thermometers come with a "maximum" temperature memory pointer and
a reset knob. Options available: various temperature ranges; direct thread or
spin nut.
5" 165/167 Series Direct-Mount Thermometer (with Switches)
This thermometer series is used where, in addition to temperature indication,
control or alarm switch contacts are required. It is used where the sensor
and indication are both near eye-level. In addition to a maximum memory
pointer, these thermometers are available with up to two adjustable and a
third, fixed switch for control and alarms. Options available: Liquid or
Winding temperature; up to two user-adjustable and one fixed switch;
temperature ranges; mounting styles; variety of electrical connections, cable
sizes, and wire colors.
4" 150/151 Series
6" 104 Series Remote-Mounted Mechanical Thermometers
This thermometer is designed for applications where the sensor must be
mounted in a location separate from the indicating gauge and uses an ambient
temperature-compensated, fluid-filled, capillary system. Features include:
switches that can be field-tested without calibrated temperature baths; front
dial calibration adjustment. Options available: up to 4 user-adjustable
switches; temperature ranges; Liquid or Winding temperature or other dial
legends; capillary and electrical cable lengths; transformer dry-wells for
mounting sensor; electrical connection type; cable and wire type/colors.
5" 165/167 Series
6" 104-400 Series SCADA Output Thermometer
This thermometer is the same as the above but with SCADA output. The
temperature is converted to either a 0-1 or 4-20 mA signal. An optional
second RTD input with separate SCADA output is available.
AKM Bi-Metal Contact Thermometers
AKM Contact Thermometers have two adjustable micro-switches, and a
resettable maximum pointer. In standard form they are available for frontor top-mounting, and can be fitted with different connection threads to suit
installation requirements.
AKM Oil Temperature Indicator Series 34 (OTI)
The OTI measures the top oil temperature, and is a standard accessory for
cooling, control and protection for all transformers.
104-300 Series
AKM Winding Temperature Indicator Series 35 (WTI)
By making a "Thermal Image" of the winding the WTI Series 35, simulates
the winding temperature. The temperature of the winding depends on the
transformer load (i.e. the current through the winding) and the temperature
of the cooling medium - the oil. These two parameters are measured and
made to interact in the instrument. The oil temperature is measured as usual
with a bulb in a pocket. The measuring system also has a specially designed
heating element, to measure the transformer load. This heating element is
a thermal model of the winding. The heating element is connected to the
current transformer (CT) via a Matching Resistance or a Matching Unit, to
allow setting the correct winding temperature gradient.
Bi-Metal Thermometers
Oil Temperature
Indicator
Equipment Protection
Mechanical Liquid Level/Flow Products
032 Series 6" Liquid Level Gauges for Medium and Large Power
Transformers, Conservator Tanks and Load Tap Changers
Contains up to two heavy-duty switches for alarm and control functions.
Rugged 2-piece cast-aluminum flange back end permanently seals the tank.
The device features a replaceable aluminum case and dial. Available in Direct
Drive or Gear Drive. Options include switch actuation points, indicating
marks/ angles, float rod variations and electrical connections.
020/030 Series 2" and 3", Indication-only, Side-mount Liquid
Level Gauges for Distribution Transformers
Universal Liquid Level Gauges
Designed for use on pad mounted and other small distribution transformers.
020 Series 2" available in cast aluminum one-piece gauge, or thread mounted
plastic version. 030 Series 3" available in two-piece aluminum construction.
Options include indicating marks and angles, and float rod variations.
035 Series 3 1/2" Liquid Level Gauge with Switches for
Distribution Transformers
Contains up to two heavy-duty switches for alarm and control functions.
Rugged 2-piece cast-aluminum flange back end permanently seals the tank.
The device features a replaceable aluminum case and dial. Options include
switch actuation points, indicating marks/angles, float rod variations and
electrical connectors.
042 Series 6" Liquid Level Gauge
Designed for use on medium and large power transformers that require level
indication and alarm control functions. The 042 Series level gage offers all
the features of the 035 Series, with the addition of a weather-resistant junction
box for direct wiring to terminal strip. The free-breathing wiring enclosure
is designed with entry holes for conduit fitting attachment.
020/030 Series 2" and 3"
AKM Oil Level Indicator - Series 67/69
The Oil Level Indicator Series 67/69 displays and monitors the oil level in
conservator tanks of large power transformers, and is especially suitable for
use in conservators with rubber sack. The Series 67/69 has a hydromechanical
measuring system ensuring high accuracy. The oil level is sensed by a float
arm connected to a transmitter, which can be installed in any position on
the conservator, top, side or bottom. The transmitter is joined to the indicator
by flexible tubing, making it easy to install the indicator at eye level. The
micro-switches for oil level control are located inside the indictor instrument
case where they are easy to connect and adjust. As an option, the indicator
can be equipped with a transmitter for remote use.
092 Series Oil Flow Gauges
Liquid Level Gauges
Oil Flow gauges are designed for use on transformers with forced oil systems,
indicating proper flow both on the dial and via a switch contact. Available
options include: fixed or adjustable torque models; a variety of mounting
styles; various flow rates, electrical connection types, cable types, colors and
lengths and dial legends.
Pressure Relief Devices
201/202 Series Small Pressure Relief Devices (PRD)
Small PRDs are used on small distribution transformers, including pad, pole,
and hermetic styles. Valves feature one-piece brass housings with a stainless
steel spring, a Viton o-ring seal and a stainless steel pull-ring. A ‘bug shield’
cover that inhibits foreign material from entering the valve body protects
the exhaust port. Options include choice of operating pressure, relief flow
rate, visual indicator, mounting threads and sealing systems,
205 Series Medium Pressure Relief Devices
These valves are designed for use on pad-mounted and other small distribution
transformers. Valve components are constructed with the same materials as
the 201/202 Series valves. The flow rate is 210 SCFM @15 PSI. Models are
available featuring field adjustable pressure setting and thread sizes to meet
or exceed ANSI standards.
201/202 and 205 Series
Equipment Protection
206 Series Medium Pressure Relief Devices
Medium sized PRDs are used on either medium distribution or small power
transformers. The 206 offers a uniquely designed top/side gasket that seals
under repeated operations. Options include choice of operating pressure,
Directional Shield to control the flow of hot oil or air discharge, and alarm
switches
208/216 Large Pressure Relief Devices
Large PRDs are used on medium to large power transformers, both
nitrogen blanket or conservator style, load tap changers and other electrical
apparatus. Options include operating pressure, alarm switches, visual indicating
flag, electrical connection types, cable size, lengths, and wire colors and
stainless steel components for use in corrosive environments. Additionally,
you can select a mechanically-retained top gasket, recommended for use at
higher pressures and for under-oil use at higher temperatures. A Directional
Shield is also available
to control the flow of hot oil/air discharge and protect the environment.
206 Series
Pressure Control Devices
900/910 Series Rapid Pressure Rise Relays
The Qualitrol Rapid Pressure Rise Relay (RPRR) is used worldwide as the
standard to provide transformer protection signals to the protective relay
system during the occurrence of a potentially destructive overpressure event.
The device looks at the rate of pressure increase, and sends a signal if a rate
exceeding a safe threshold is detected. The 900 is designed for mounting
under oil, and the 910 designed to be mounted in the gas space. The optional
909-200 series Seal-In-Relay latches the output relay and lights an indicator
until it is reset by field personnel. Available options include horizontal or
vertical mount, a variety of electrical connection types, and cable size, lengths,
and wire colors.
208/213/216 Series
050 Series Vacuum Pressure Gauge
The 050 Series Vacuum Pressure Gauges are designed to be used on distribution
and power transformers in conjunction with pressure/vacuum bleeders to
provide visual indication of internal tank conditions. Gauges are available
with various ranges and English or metric scales.
351 Pressure Vacuum Bleeder
These devices are designed for use on transformers or other vessels where
pressure and/or vacuum must be controlled. They are adjustable from 3 to
12 psig pressure or vacuum and can be mounted in any direction. A 1/4”
NPT Connection port is standard for mating to a pressure/vacuum gauge
if visual indication is required.
900/910 Series
AKM SF6 Gas Density Monitors
The SF6 Gas Density Monitors automatically adjust the reading for any
changes in pressure at +20°C, regardless of the ambient temperature. The
Density Monitors have 1-3 contacts for alarm and blocking at preset levels.
Each individual type of instrument is manufactured fully according to the
requirements of the individual customer. We are pleased to give our
recommendations based on your requirements.
050 Series
SF6 Gas Density
Monitors
Data Acquisition
IDM Data Acquisition System
The IDM is designed to address the data recording requirements of modern
distribution or transmission networks. The product, when coupled with
ReplayPlus software, provides a powerful platform for the acquisition, analysis
and reporting of data from power system substations. Each IDM DAU –
equipped with a 16-bit processor, 16-bit A/D and powerful DSP processor
– processes analog input data each cycle to compute, in real time, 100 power
system quantities including real and reactive power, sequence components,
phasors, harmonics, frequency, etc. These quantities are then used for
simultaneous fault recording, disturbance/slow scan recording, phasor
measurement, power quality recording and can also be made available to
other substation IEDs for integration into SCADA systems.
Traveling Wave Fault Locator (TWS)
IDM Data Acquisition System
The Telefault TWS operates on the travelling wave principle and provides an
accuracy of ±150m (± 500ft). It can be used on high voltage AC lines of any
length, including those containing sections of cable, parallel circuits, tapped
loads and series capacitors. It can also be used on HVDC lines. The TWS
provides three different modes of fault location. It is unaffected by fault
resistance and provides a consistent level of accuracy many times better than
conventional impedance type fault locators. The standard version can
accommodate up to eight line modules so that eight circuits can be monitored
simultaneously. An internal modem is provided for remote data retrieval and
configuration. Optionally, it can be interfaced to SCADA systems/substation
IEDs. The DSFL Distribution System Fault Locator is an inexpensive overhead
line fault locator for small transmission networks or distribution systems. The
DSFL uses input from the TWS, initiated by a fault to determine the position
of the fault.
ReplayPlus Analysis Software
Traveling Wave Fault Locator
A flexible, high performance display and communications package allowing
Power Utilities to retrieve, analyze and manage information from fault
recorders throughout their transmission and distribution networks.
ReplayPlus™ for Windows™ is a Fault Recorder Master Station software
package which runs on an IBM compatible PC. It offers a flexible system
for communication, display and analysis of records from our fault recorders.
The package offers an integrated solution to fault recorder configuration,
manual and automatic fault data retrieval and graphical analysis. The results
can be presented in a variety of formats for ease of reporting; an essential
tool for the Power Utility of today. ReplayPlus allows direct communication
or communication via modems with a number of different types of recorders.
Functions available on the recorder's keypad can be performed remotely
using ReplayPlus. Records, once transferred to ReplayPlus, can be catalogued
using a directory function. Any record can then be selected for viewing and
the graphical waveform displayed in any desired format. Time and amplitude
measurements can be made from the graphical waveform. Distance to Fault
information can also be displayed.
Data Acquisition
BCM 200 Breaker Condition Monitor
Since the BCM 200 records the current interrupted by every breaker trip,
it can provide fault monitoring information on distribution systems where
there are generally no other fault recording devices installed. The records
obtained can thus be used to determine the magnitude and duration of
faults, detect recurring faults, and monitor protection performance.
CBT 400 Circuit Breaker Test System
The new CBT 400 is the latest microprocessor based Circuit Breaker Test
System for the timing and testing of medium and high voltage circuit breakers.
Like its predecessor this device is a portable test system and the ideal tool
for circuit breaker testing during off-line maintenance. The CBT 400 together
with its powerful analysis software package, can give a clear and precise
insight into the condition and conformity of a circuit breaker.
RTR 200 Circuit Breaker Response Recorder
The RTR 200 allows a breaker to be tested while remaining in service. The
system has been designed to monitor several common signals in the control
circuitry of the circuit breaker, typically trip and close coil current, supply
voltage dip, A, B or C3 auxiliary contacts and trip and close initiation. These
and other electrical signals are brought to a permanently installed connector
in the breaker mechanism cabinet. To perform a test the RTR 200 recorder
is connected to this pre-wired plug and the breaker is operated remotely.
The RTR 200 stores the data from the test and is then moved to the next
breaker. The resulting trace can be considered as the fingerprint of a given
circuit breaker. The essence of the RTR 200 concept is the comparison of
these fingerprints.
BCM 200 Breaker Condition Monitor
GPS Time Synchronizer
The GPS Time Synchronizer provides accurate timing using time signals
transmitted by the NAVSTAR constellation of GPS satellites. Compact and
easy to install, it provides output signal formats to match the requirements
of all available Disturbances Recorders, Sequence of Events Recorders and
SCADA systems.
CBT 400 Circuit Breaker
Test System
GPS Time Synchronizer
Data Access
Remote Terminal Units
RMS900
The RMS900 is a multifunction device which combines the functionality
of a small SCADA RTU, fault detector, PLC and power transducers into a
single, cost effective, compact unit suitable for substation, pad-mount and
pole-mount applications. The RMS900 combines the latest electronic,
software and manufacturing technologies to achieve remote control and/or
automatic local control, of circuit breakers, tap changers, reclosers, sectionalizers
or capacitor switches. It combines the functions of a traditional SCADA
RTU with the added benefits of small size and low cost, transducerless
measurement of AC power quantities, fault detection and harmonic analysis.
Features include: 9 AC analog inputs for direct connection to CTs, PTs and
LPSs; digital signal processing – current, volts, power, frequency and phase
angle measurement; advanced options include alarm limits, fault detection
and harmonic content; optional Echelon FT-10 LonTalk network port. A
range of Windows PC tools are available for the RMS900 comprising Fault
Detection and Display software, a Remote Configuration Toolkit (RCT)
and a powerful ISaGRAF IEC 61131-3 compliant programming workbench.
RMS900
SR8550 Substation Controller
The SR8550 Substation Controller provides an excellent platform for adding
SCADA functions to a substation. Up to two Dual Port Communications
Modules may be used to provide four independent communication ports.
An Intel Standard SBX Bus supports additional types of I/O such as Analog
and Pulse Width Outputs. The SR8550 utilizes an operating system compatible
with the IR8600, which allows the use of the entire SNW Protocol Library.
The design of the powerful Main Logic board provides a natural migration
for existing SR8500 Upgrades, and the retrofit of many competitive systems.
IR8600
The IR8600 intelligent RTU is a dual-channel Communications Processor
accomodating for data exchange between a variety of devices ranging from
SCADA Master Stations to Intelligent Electronic Devices (IEDs). In multiport communications, up to 16 dedicated processors may be employed.
The I/O Processor (IOP) manges I/O data to perform supervisory control
and data acquisition. Multiple IOPs may be utilized to provide the point
capacity necessary to satisfy the requirements of the largest installations.
Modular ‘plug-in’ processor and ‘snap-in’ I/O modules simplify expansion
and maximize flexibility.
NR8800
!
NEW
RTU Family
NR8800
The NR8800 uses an innovative PC104 card ‘stack’ design that permits
mixing and matching options such as GPS receivers, IRIG-B modules,
ethernet controllers and multi-line serial port cards. All RTU configuration
changes and diagnostics are performed through the network port. In addition
the RTU has a built-in web server that allows the user to make these locations
independent, secure, ‘live’ websites. This RTU offers multiple serial ports,
up to 16, which can be equipped with protocols from our extensive library.
A large number of SCADA and IED protocols are available, including legacy
support for bit-oriented protocols. Also supported via 10/100 Base T ethernet
LAN/WAN connectivity are IP based protocols such as ICCP, DNP3.0 and
IP-MODBUS. This RTU has a family of field proven I/O, which meets the
environmental requirements of the Electric Utility market. The I/O capabilities
of the RTU include 16-bit analog inputs, digital inputs (1 ms S.O.E.
recording, simple status, status with MCD and pulse accumulations), SBO
and PWO controls and SetPoint (both analog and digital out) outputs.
Data Access
Systems
Substation Information Server (SIS)
The SIS provides the ability to utilize secure WAN technology to connect
substations and transmit information contained in various IEDs to one or more
data delivery points. It is comprised of an industrial-grade computer, one or
more network communications connections, an internal power supply, and serial
ports and includes a real-time operating system (VxWorks) and a full TCP/IP
communications package incorporating Secure Sockets Layer (SSL). The SIS
can utilize ‘payload’ (message) encryption and digital certificate authorization
software giving it a ‘private key’ to activate and enable data exchange functions.
For additional security, the digital certificate is supplied/maintained by an
independent authority or your IT group. It supports many communications
protocols including MODBUS, DNP3.0 and PG&E, among others. It collects
and processes both simple, real-time data (status and measurements) as well as
complex data such as oscillographic, fault data from relays, and digital fault
recorders. It consolidates data from numerous devices and selectively transfers
the data to multiple destinations. Data transfer mechanisms include: "virtual
RTU" emulation, "flat" ASCII file, secure ftp file transfer, ODBC server, web
pages or records appended to an Oracle relational database.
SIS400 Substation Information Server
DAS4000 Distribution Automation SCADA
This product is a full-function SCADA system designed for distribution
automation applications. It is highly scalable and based on off-the-shelf,
commercially available equipment. The system uses a distributed architecture
that provides just the necessary level of capacity without sacrificing the ability
to field-expand as requirements grow. The minimum configuration for a system
is a PC workstation (or laptop) running LINUX and a single-board Remote
Server Unit (RSU) with four serial ports and appropriate telecommunication
interfaces. Add a color printer and a mass storage unit, and you have a small
SCADA system with all of the features of a more expensive system: trending,
reporting, alarming, color graphics, calculations and supervisory control languages.
Add another workstation, and you have a nearly redundant system. Each
workstation is fully independent and provides a full backup to the other. In
addition, they automatically synchronize with each other. The RSU can be
expanded to support up to thirty-two polling channels. It allows the simultaneous
polling of RTUs on each channel, and use of different protocols on each channel
and can easily support up to eight different protocols at one time.
Betalarm 4
Event Recorders and Annunciators
Betalarm 4
The Betalarm 4 is our newest annunciator and brings this technology into the
21st century. The modular design allows you specify an annunciator of almost
any shape or size. The use of Surface Mount Technology (SMT) and Application
Specific Integrated Circuitry (ASIC) provides a low cost yet highly flexible
functionality. The Betalarm 4 offers many standard features that would otherwise
be unavailable or provided at additional cost. Other features include: any standard
ISA alarm sequence; three different window sizes; six different window colors;
high intensity LED display option; high reliability, ‘No-Master-Module’
architecture.
SER4100
The Hathaway SER4100 has become the standard for Sequential Event Recording.
Reliable and easy to use, the building block design of the SER4100 allows systems
to be tailored to almost any application. The SER4100 can accommodate systems
with a few points in a single location, to an entire transmission system spanning
an entire continent with thousands of inputs. Output devices from a simple
printer to a multi-workstation wide area network can also be served by the same
system. Whatever your application, the SER4100 can meet your needs. Options
and features include: from 64 to 4096 inputs; 1 millisecond time stamping for
any system size; 3-RS232 I/O ports, expandable to 6, for multiple peripheral
devices; optional IRIG B time synchronization input; optional redundant
controller system for high reliability applications; optional Ethernet Network
capability.
SER4100
Qualitrol Corporate Brands
Qualitrol Corporation
1385 Fairport Road
Fairport, NY 14450 USA
585-586-1515
e-mail: info@qualitrolcorp.com
www.qualitrolcorp.com
Qualitrol Equipment
Protection Division
Flygfaltsgatan 6C
SE-128 Skarpnack, Sweden
+46-8-447-54-50
e-mail: info@akmsweden.com
Qualitrol Instruments
Division
Wildflower Way
Belfast
Northern Ireland BT126TA
+44-2890-225200
Qualitrol Instruments Division
2 Inverness Drive East
Suite 106
Englewood, CO 80112
303-799-8200
303-799-8880
Qualitrol Systems Division
102 Lakefront Drive
Hunt Valley, MD 21030 USA
410-771-0022
© Qualitrol 2003
September, 2003.
Information subject to change without notice.
So much depends on you and your
equipment, shouldn’t you depend
on the durability and quality of
Qualitrol.
Call us at 585-586-1515
Visit www.qualitrolcorp.com
e-mail info@qualitrolcorp.com