Section L – Accessories
Accessories
Table of Contents
UniJet Strainers. . . . . . . . . . . . . . . . . . . . . . . L9
Snubbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . L28
QuickJet Spray Nozzle Systems. . . . . . . . . L2
UniJet Filters, Valves and Stabilizers. . . . L10
Air Line Filters. . . . . . . . . . . . . . . . . . . . . . . . L29
UniJet Spray Nozzle Systems. . . . . . . . . . . L2
UniJet Adapters. . . . . . . . . . . . . . . . . . . . . . L11
Liquid Strainers,
Low to Medium Pressure. . . . . . . . . . . . . . L30
QuickJet® and UniJet® Spray Nozzle
Systems/Components
Standard QuickJet Bodies. . . . . . . . . . . . . . L3
ProMax® QuickJet Bodies. . . . . . . . . . . . . . L3
QuickJet Adjustable Ball Fitting Bodies . . L3
QuickJet Split-Eyelet Bodies. . . . . . . . . . . . L3
Kynar® QuickJet Bodies. . . . . . . . . . . . . . . . L3
QuickJet and ProMax
Nozzle System Plugs . . . . . . . . . . . . . . . . . L3
UniJet Nozzle System Adapter
for QuickJet Systems. . . . . . . . . . . . . . . . L3
Standard UniJet Nozzle Bodies . . . . . . . . . L6
UniJet Split-Eyelet Bodies. . . . . . . . . . . . . . L6
UniJet Plug Valve Nozzle Bodies . . . . . . . . L6
Quick UniJet Adapters and Caps. . . . . . . L12
Split-Eyelet Connectors . . . . . . . . . . . . . . . L14
Adjustable Ball Fittings. . . . . . . . . . . . . . . . L16
T-Style Strainers, High Pressure. . . . . . . . L32
Self-Cleaning Strainers. . . . . . . . . . . . . . . . L33
Check Valves . . . . . . . . . . . . . . . . . . . . . . . . L18
Swivel Connectors, Eductors
and Filtration Assemblies. . . . . . . . . . . . . . L34
Plug and Ball Valves. . . . . . . . . . . . . . . . . . L19
Hoses and Mounting Bases. . . . . . . . . . . . L35
Rollover Valves. . . . . . . . . . . . . . . . . . . . . . . L20
Throttling and Pressure Relief/
Regulating Valves . . . . . . . . . . . . . . . . . . . L21
UniJet Rollover Nozzle Bodies . . . . . . . . . . L6
Solenoid Valves. . . . . . . . . . . . . . . . . . . . . . L23
UniJet Ball Valve Nozzle Bodies. . . . . . . . . L6
Air Pressure Regulators. . . . . . . . . . . . . . . L25
UniJet Diaphragm Check Valve
Nozzle Bodies. . . . . . . . . . . . . . . . . . . . . . . L7
Liquid Pressure Regulators. . . . . . . . . . . . L26
Quick UniJet Nozzle Assemblies . . . . . . . . L8
Liquid Pressure Gauges. . . . . . . . . . . . . . . L27
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L1
Accessories
Some models may be available in BSPT, please contact your sales representative.
Accessories
QuickJet® and
Spray Nozzle
Systems/Components
Features and Benefits
• Efficient QuickJet and UniJet Spray Nozzle Systems are
designed to save time in the cleaning and replacement of
plugged or worn spray tips.
• Key feature overview for UniJet Spray Nozzle Systems:
– Quick and easy spray tip replacement.
– Reduces costs because individual spray tips can be replaced
without replacing the entire nozzle body.
• Key feature overview for QuickJet Spray Nozzle Systems:
– Reduce maintenance downtime and costs with fast, easy and
accurate change-out of spray tips.
– For UniJet tips, see section B, Full Cone Spray Nozzles,
section C, Flat Spray Nozzles, section D, Hollow Cone Spray
Nozzles and section E, Fine Spray Nozzles.
– True versatility for any application with a wide variety of body
types/sizes, materials, spray patterns, angles and accessories.
– Easy and accurate assembly.
– Feature easy-grip spray tips and integral seals to prevent
accidental misplacement.
– For QuickJet tips, see section B, Full Cone Spray Nozzles,
section C, Flat Spray Nozzles and section D, Hollow Cone
Spray Nozzles.
QuickJet
UniJet
Female body
Female body
Male body
Male body
Spray tip
Spray tip with seal
Tip retainer
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L2
Spray Nozzle
QuickJet® and
Systems/Components
Features and Benefits
• Key feature overview for standard QuickJet nozzle bodies:
– Threaded QuickJet bodies readily adapt to most manifold and
header installations.
• Key feature overview for QuickJet split-eyelet bodies:
– Quick and easy mounting to manifold or header.
– Leak-proof seal provided by Buna-N gasket material.
– QuickJet spray tips available in wide range of capacities for flat,
hollow cone and full cone patterns.
– Available in brass or 303 Stainless Steel to fit pipe sizes from
0.75" to 2".
– Spray tips are precision machined for flow rate and spray
pattern accuracy.
– QuickJet body, clamps, bolts and gasket included.
• Key feature overview for Kynar® QuickJet nozzle bodies:
– Kynar PVDF thermoplastic nozzles are FDA compliant.
– Each spray tip’s integral seal (either Viton® or Buna-N) ensures
positive fit between tip and body.
• Key feature overview for ProMax® QuickJet nozzle bodies:
– Molded with engineering grade polypropylene.
– Adapt to most manifold and header installations.
– Kynar spray tips specifically matched to nozzle bodies and are
available in flat and full cone spray patterns.
– Durability with chemical resistance.
– Positive spray tip fit with standard EPDM rubber or optional
Viton seals.
– Unique locking system.
– Spray tip can be inserted by hand and locked into correct
alignment automatically.
– Each spray tip is matched to the nozzle body for quick
installation and automatic alignment.
• Key feature overview for QuickJet and ProMax nozzle
system plugs:
– The QuickJet plug tip can be used to conveniently shut off
individual nozzles
• Key feature overview for UniJet® nozzle system adapter for
QuickJet systems:
– The UniJet adapter converts UniJet spray tips to the
QuickJet System.
– Tips include an integral Viton O-ring seal.
– Optional external O-ring protects nozzle against contaminants in
harsh environments.
– Spray tips are available in flat or full cone spray patterns and are
color-coded for flow rate identification.
• Key feature overview for QuickJet adjustable ball fitting bodies:
– Easy positioning of QuickJet spray tips within a 50° included
angle of adjustment.
– The adapter accommodates both the threaded cap that holds
the UniJet tip, as well as strainers, check valves, fittings and
other UniJet options.
– Locking screws maintain nozzle position even when jarred or
subjected to vibration.
ProMax QuickJet Bodies
QJJS, QJJA, QJJLA male bodies
QJA, QJLA female bodies
1/8" to 1/2" NPT or BSPT
QPPA male bodies
1/8" to 3/8" NPT or BSPT
QuickJet Split-Eyelet Bodies
QuickJet Adjustable
Ball Fitting Bodies
QJA male bodies
1/4" to 1/2" NPT or BSPT
Kynar QuickJet Bodies
QJASE bodies
3/4" to 2" clamp size
QQ male bodies
1/8" to 3/8" NPT or BSPT
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L3
Accessories
Standard
QuickJet Bodies
Accessories
QuickJet® and
Spray Nozzle
Systems/Components
Materials
QJASE
Specifications
Body Type
Material
Code
Material
QJA
QJLA
QJJS
QJJA
QJJLA
QPPA
QJASE
Brass
(none)
l
l
l
l
l
l
303 Stainless Steel
SS
l
l
l
l
l
l
316 Stainless Steel
316SS
l*
l
l
l
l
ProMax®
(none)
Kynar
KY
®
To Clamp On
QQ
Body
Type
Tubing
O.D.
in. (mm)
Pipe
Size
(in.)
3/4 QJASE
1 to 1-1/16
(25 to 27)*
3/4*
1-1/8 to 1-3/8
(32 to 35)*
1*
3/4 QJASE-SS
l
l
1 QJASE
1 QJASE-SS
*QJA female body only.
1-1/4 QJASE
Other materials available upon request.
1-1/4 QJASE-SS
1-1/2 QJASE
1-1/2 QJASE-SS
Body Types
2 QJASE
2 QJASE-SS
Standard Body
Inlet
Conn.
(in.)
Conn.
F
QJA
QJJS
QJJA
QJJLA
1-3/4 to 2
(44 to 51)†
1-1/2†
2-1/8 to 2-3/8
(54 to 60)†
2†
*1/2" (12.7 mm) drill hole.
Conn.
M
QJLA
1-9/16 to 1-11/16
1-1/4†
(39 to 43)*
†11/16" (17.5 mm) drill hole.
QPPA
QJA
QQ
1/8
l
l
l
l
1/4
l
l
l
l
l
l
3/8
l
l
l
l
l
l
l
1/2
l
l
l
l
l
l
Ordering Info
Adjustable Ball Fitting
QuickJet Complete Nozzle
QuickJet Complete Nozzle
Nozzle Body
Nozzle Body
1/4 QJJA – SS +
l
l
l
Inlet
Conn.
Body
Type
Material
Code
QuickJet
Spray Tip
1/4 x QJA – SS +
l
l
l
Inlet
Conn.
Body
Type
Material
Code
QuickJet
Spray Tip
BSPT connections require the addition
of a “B” prior to the inlet connection.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L4
Spray Nozzle
QuickJet® and
Systems/Components
QuickJet and ProMax®
Nozzle System Plugs
Materials
Material
Ordering Info
QuickJet
Plug Type
Material
Code
QJA
QJLA
Brass
(none)
l
l
303
Stainless
Steel
SS
l
l
ProMax
(none)
ProMax
QuickJet
Plug Type
QPA
QuickJet Plug
QJAPLUG – SS
l
l
QuickJet Plug
Type
Material
Code
QPAPLUG
l
ProMax Plug
Type
l
Other materials available upon request.
For standard bodies
For ProMax bodies
UniJet® Nozzle
System Adapter for
QuickJet Systems
Materials
Ordering Info
Material
Material
Code
Body Type
UniJet Adapter
QJA
QJA x 11/16–16 – SS
Brass
(none)
l
303 Stainless Steel
SS
l
l
l
l
Adapter
Type
Outlet
Conn.
Material
Code
Other materials available upon request.
Specifications
Outlet
Conn.
Body Type
11/16-16
l
QJA
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L5
Accessories
For standard bodies
Accessories
Spray Nozzle
QuickJet® and
Systems/Components
Features and Benefits
• Key feature overview for standard UniJet nozzle bodies:
– Threaded UniJet bodies readily adapt to most manifold and
header installations.
• Key feature overview for UniJet plug valve nozzle bodies:
– Versatile in-line plug with sturdy brass body and one-piece
Celcon® plug/handle.
– UniJet spray tips available in wide range of capacities for flat,
hollow and full cone patterns.
– Positive, quick and easy shut-off operation.
– Maximum operating pressure 400 psi (28 bar).
• Key feature overview for UniJet rollover nozzle bodies:
– Ideal for systems that need frequent cleaning, or where two
different spray patterns may be used.
– Spray tips are precision machined for flow rate and spray
pattern accuracy.
• Key feature overview for UniJet split-eyelet bodies:
– Quick, easy and economical way to mount UniJet nozzles on
pipe or tubing.
– Permits quick switch-over between two nozzles.
• Key feature overview for UniJet ball valve nozzle bodies:
– Positive on/off control for individual nozzles.
– No cutting, threading or brazing assures positive leak-proof
seal and cost savings.
– Sturdy brass body with stainless steel ball to operate at
pressures up to 400 psi (28 bar).
– Precision connector bodies are machined from solid bar stock
in brass or 303 Stainless Steel to fit pipe sizes from 0.50" to 1".
– Design of body inlet retards entry of sediment to minimize
clogging and maintenance costs.
– Designed for pressures up to 250 psi (17 bar) with flow rates up
to 3 gpm (11.4 l/min).
– Body, clamps, bolts and gasket included.
Standard UniJet
Nozzle Bodies
UniJet Split-Eyelet
Bodies
1/8" to 1/2" NPT or BSPT (M or F)
inlet connection
11/16"-16 (M)
outlet connection
7421
1/2" to 1" clamp size
UniJet Rollover
Nozzle Bodies
UniJet Plug Valve
Nozzle Bodies
23220
1/4" NPT or BSPT (M or F)
UniJet Ball Valve
Nozzle Bodies
23830
1/4" NPT or BSPT (M or F)
11/16"-16 (F) inlet connection
11/16"-16 (M) outlet connection
20900
1/4" NPT or BSPT (M or F)
inlet connection
11/16"-16 (M)
outlet connection
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L6
Spray Nozzle
QuickJet® and
Systems/Components
Body Types
Inlet
Conn.
(in.)
Specifications
Standard Nozzle Body
with Tip Retainer
1/8
Conn.
M
Conn.
F
Conn.
M
1/8T
1/8TT
CP1335
CP1336
1/8T-SS
1/8TT-SS
CP1335-SS
CP1336-SS
1/4T
1/4TT
CP1321
1/4T-I
3/8
1/2
1/4TT-I
CP1321-I
Tubing
O.D.
in. (mm)
Pipe
Size
(in.)
13/16 to 7/8
(20 to 22)
1/2
1 to 1-1/16
(25 to 27)
3/4
1-1/4 to 1-3/8
(32 to 35)
1
Nozzle Body*
Conn.
F
1/4T-NYB 1/4TT-NYB CP12094-NYB
1/4
To Clamp On
Standard
Nozzle Body Only
7421-1/2T
CP1322
7421-1/2T-SS
CP8028-NYB
7421-3/4T
CP1322-I
1/4T-SS
1/4TT-SS
CP1321-SS
3/8T
3/8TT
CP1323
CP1324
3/8T-SS
3/8TT-SS
CP1323-SS
CP1324-SS
1/2T
1/2TT
CP1339
CP1340
1/2T-SS
1/2TT-SS
CP1339-SS
CP1340-SS
7421-3/4T-SS
CP1322-SS
7421-1T
7421-1T-SS
*Also available in stainless steel.
Ordering Info
UniJet
Complete Nozzle
UniJet
Complete Nozzle
Nozzle Body
UniJet
Complete Nozzle
Nozzle Body
1/4 TT – SS +
l
l
l
Inlet
Conn.
Body
Type
Material
Code
UniJet
Spray Tip
Nozzle Body
7421 – 1/2 T – SS +
l
l
l
l
Model
No.
Clamp
Size
Body
Type
Material
Code
UniJet
Spray Tip
23220 – 1/4F x
l
l
Model
No.
Inlet
Conn.
T
l
+
UniJet
Spray Tip
UniJet
Thread
UniJet Complete Nozzle
Nozzle Body
20900 – 1/4M x
l
l
Model
No.
Inlet
Conn.
T
l
+
UniJet Diaphragm Check Valve
Nozzle Bodies
UniJet
Spray Tip
UniJet
Thread
Nozzle Body
Model
Material
Valve
Seat
Inlet
Conn.
Maximum
gpm (l/min)
8360
Nylon
SS
1/4" NPT or
BSPT (M)
2 (7.6)
4664B
Brass or
Aluminum
SS
1/8" NPT or
BSPT (F)
1.5 (5.7)
Materials
Material
Material
Code
T
TT
7421
23220
23830
20900
l
l
l
Brass
(none)
l
l
l
303 Stainless Steel
SS
l
l
l
Mild Steel
I
l
l
Nylon
NYB
l
l
Other materials available upon request.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L7
Accessories
BSPT connections require the addition of a “B” prior
to the inlet connection.
Accessories
Spray Nozzle
QuickJet® and
Systems/Components
Features and Benefits
• Key feature overview for QJ17560-NYB nozzle assemblies:
– Drip-free ChemSaver® shut-off requires 10 psi (0.7 bar)
at nozzle to open check valve.
• Key feature overview for QJ7421 nozzle assemblies:
– Available to fit 0.50", 0.75" and 1" pipe.
– Maximum operating pressure is 300 psi (20 bar).
– Long-lasting EPDM rubber diaphragm with optional
Viton® available.
• Key feature overview for QJ1/4TT-NYB and QJ1/4T-NYB
nozzle assemblies:
– Available with connections to fit NPT, BSPT (M) or NPT,
BSPT (F).
– Available to fit 0.50", 0.75" and 1" pipe.
– Maximum operating pressure is 300 psi (20 bar).
– Maximum operating pressure is 300 psi (20 bar).
QJ17560-NYB
QJ7421-NYB
1/2", 3/4" or 1" pipe
QJ1/4TT-NYB
1/2", 3/4" or 1" pipe
QJ1/4T-NYB
1/4" NPT or BSPT (M)
Specifications
1/4" NPT or BSPT (F)
Specifications
Nozzle
Assembly
To Clamp
On
Nozzle
Assembly
Inlet Conn.
(in.)
QJ17560A-1/2-NYB
1/2" Pipe
QJ1/4TT-NYB
1/4
QJ17560A-3/4-NYB
3/4" Pipe
QJ1/4T-NYB
1/4
QJ17560A-1-NYB
1" Pipe
QJ17560A-NYB
20 mm Pipe
QJ17560A-NYB
25 mm Pipe
QJ7421-1/2-NYB
1/2" Pipe
QJ7421-3/4-NYB
3/4" Pipe
QJ7421-1-NYB
1" Pipe
Ordering Info
Ordering Info
UniJet Complete Nozzle
QJ17560 – 1/2 – NYB +
l
l
l
Model
No.
Pipe Size
Material
Code
UniJet Complete Nozzle
QJ 1/4 TT – NYB +
UniJet
Spray Tip
l
l
l
l
Model
Type
Inlet
Conn.
Body
Code
Material
Code
UniJet
Spray Tip
(additional
cap required)*
*See your Sales Engineer for alternative
caps available.
BSPT connections require the addition
of a “B” prior to the inlet connection.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L8
Strainers
Specifications
Strainers
Ordering Info
Model
UniJet Strainer
Construction
Screen
5053
Brass
Stainless steel with
24, 50, 100, 200 mesh
8079
Polypropylene
Stainless steel with
24, 50, 100, 200 mesh
6051
Stainless steel
Stainless steel with
24, 50, 100, 200 mesh
Brass
Milled slot equivalent
16, 25, 50 mesh
Aluminum
Milled slot equivalent
16, 25 mesh
Nylon
Milled slot equivalent
16, 25, 50 mesh
4514 Slotted
6051
–
l
Strainer
Type
SS
–
l
50
l
Material
Code
Mesh
Size
UniJet Strainer
4067
–
l
200
l
Strainer Type
Mesh Size
UniJet Strainer
4067 Cup
Stainless steel
7630 Disc
Stainless steel
Stainless steel with
50, 100, 200 mesh
Stainless steel with
50, 100, 200 mesh
4193A – SS –
l
l
Strainer
Type
Material
Code
Aluminum
Brass
Stainless steel
Polypropylene
Stainless steel with
24, 50, 100, 200 mesh
– 50SS
l
l
Spring
Opening
Pressure
(psi)
Mesh
Size
UniJet Strainer
4514
l
4193A with check valve*
5
Strainer
Type
–
NY
l
Material
Code
–
10
l
Slot
Width
*Built-in check valve and stainless steel springs with opening pressures
of 5, 10, 20 or 40 psi (0.35, 0.7, 1.5 or 2.8 bar).
Materials
Strainer Type
Material
Material
Code
5053
l
Brass
(none)
Aluminum
AL
Nylon
NY
Stainless Steel
SS
Polypropylene
PP
8079
6051
4514-10
4514-20
4514-32
4193A
(50 Mesh) (25 Mesh) (16 Mesh)
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L9
Accessories
Other materials available upon request.
Accessories
Filters, Valves and Stabilizers
Features and Benefits
• Key feature overview for 11370 and 11950 jet stabilizers:
– Increase spray projection distance and spray impact on flat
spray tips which are mounted at a 90° angle to the liquid
supply line.
• Key feature overview for 4916 metering plate:
– Available in 82 orifice diameter sizes from 0.008 to 0.25"
(0.2 to 6.35 mm).
– Liquid capacity range of 0.0073 to 6.9 gpm (0.03 to 26 l/min)
at 30 psi (2 bar).
– Reduce turbulence that is created when the liquid turns the
corner in a manifold, tee or elbow and reduce distortions in the
spray pattern.
• Key feature overview for 1325 tip retainer:
– Used to hold nozzle assembly together.
– See Data Sheets 11739, 12417 and 23471-2.
• Key feature overview for 3942 plug plate:
– For shutting off flow to a specific nozzle by replacing the
spray tip.
• Key feature overview for 9106 filter:
– Effective liquid filtering action.
– Inlet connection 11/16"-16 female thread.
• Key feature overview for 11750 large capacity check valve:
– For larger capacity nozzles where strainers are not required.
– Fused bronze for durability.
– Choice of opening pressures – 5 psi (0.35 bar) or 10 psi (0.7 bar).
– 300 mesh screen equivalent.
– Flow capacity up to 1.5 gpm (5.7 l/min).
Jet Stabilizers
Ordering Info
Ordering Info
1325
Tip Retainer
Jet Stabilizer
UniJet Tip Retainer
11370 – SS – 1/8x1/8
l
l
l
Stabilizer
Type
Material
Code
Conn.
Size
CP1325
l
SS
l
Model
No.
BSPT connections require the
addition of a “B” prior to the inlet
connection.
11370
–
Material
Code
9106 Filter
11950
11750
Large Capacity
Check Valve
Ordering Info
UniJet Check Valve
11750 – AL –
4916
Metering Plate
l
l
Valve
Type
Material
Code
Materials
5
l
Spring
Opening
Pressure
(psi)
3942
Plug Plate
Material
Material
Code
Brass
Stainless Steel
303 Stainless Steel
Aluminum
Polypropylene
Mild Steel
Nylon
(none)
SS
SS
AL
PP
I
NYB
Check
Valve
Jet Stabilizer
Type
Tip Retainer
Type
11750*
11950†
11370
l
l
l
CP1325 CP8027
l
l
l
l
l
l
l
l
l
l
l
Other materials available upon request.
*Ball and spring are stainless steel.
†Stainless steel guide vane.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L10
Adapters
Specifications
Adapters
Materials
Inlet
Thread
Outlet
Thread
Length
in. (cm)
11/16"-16 (F)
1/8", 1/4",
3/8", 1/2" and
3/4" NPT or
BSPT
Varies
dependent
on
Connection.
Model
4676
6406
NA
1/8" NPT (M)
or BSPT
15/16
(2.38)
CP6250
NA
1/8" NPT (F)
or BSPT
9/16
(1.43)
CP4928
NA
1/8" NPT (F)
or BSPT
1
(2.54)
Adapter Type
Material
Material
Code
4676
6406
CP6250
CP4928
l
l
l
l
l
Brass
(none)
l
Stainless Steel
SS
l
Aluminum
AL
l
Mild Steel
I
l
l
l
Other materials available upon request.
Ordering Info
4676 – 1/4 –
l
l
Model
No.
Outlet
Conn.
UniJet Adapter
SS
CP6250
Material
Code
Model
No.
l
l
–
SS
l
Material
Code
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L11
Accessories
UniJet Adapter
Accessories
Quick
Adapters and Caps
Features and Benefits
• Key feature overview for QJT-NYB adapter:
– Fast and efficient for retrofitting conventional system to
Quick UniJet system.
• Key feature overview for color-coded caps:
– Develop a unique color-coding system for safety and control.
– Available in eight colors.
– Fits 11/16"-16 thread.
– Standard EPDM rubber seat gaskets (Viton® optional) assure
firm seal between spray tip and cap.
– Up to 300 psi (20 bar) maximum operating pressure.
– Long-lasting nylon caps work with all interchangeable UniJet
spray tips for pressures up to 300 psi (20 bar).
QJT-NYB Adapter
Color-Coded Caps
Specifications
Adapter
To Fit
QJT-NYB
11/16"-16 UniJet Thread
Ordering Info
Quick UniJet
Cap and Seat Gasket Set
Quick UniJet
Cap Only
Seat Gasket
Only
25612 – 3 – NYR
CP25611 – 3 – NY
CP19438 – EPR
l
l
l
UniJet Cap and
Seat Gasket Set
Color
Code
Material
Code
l
l
l
UniJet
Cap
Color
Code
Material
Code
l
l
Seat
Gasket
Material
Code
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L12
Quick
Adapters and Caps
Specifications
Part Number
Part Number
Cap Only
Cap and Seat Gasket Set
CP25611-*-NY
25612-*-NYR
UniJet flat spray tips
(smaller capacities)
Standard sizes through TPU08
25610-*-NYR
UniJet flat spray tips
(larger capacities)
Standard sizes TPU10 through TPU20
For Use with
Spray Tips
Color Code
Black = 1
CP25609-*-NY
CP25595-*-NY
25596-*-NYR
CP25607-*-NY
25608-*-NYR
UniJet flat spray tips
Sizes through TPU08 can be positioned in choice of two
planes: parallel or perpendicular to wings of Quick UniJet cap
For UniJet tip types:
TC, TG, TG-W, TK, TN, TN-SSTC, TPU, T-W, TX
White = 2
Red = 3
Blue = 4
Green = 5
CP25607-*-NY
–
–
D-Disc
Core
18999-EPR† (EPDM rubber standard)
18999-VI† (Viton® optional)
Seal
Yellow = 6
Core
QJ4676†
Permits use of standard 1/8" and 1/4" nozzles.
Can be used for mounting pressure gauge at the nozzle.
See Data Sheet 20055 for more information.
Brown = 7
Orange = 8
–
19843-NYR†
Provides shut-off at nozzle for
quick spacing change or change in spray swath.
*Specify color code. If no color indicated, yellow will be supplied.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L13
Accessories
†Used with disc-core sprays (insert core into seal). These Quick UniJet caps are available only in black.
Accessories
Split-Eyelet Connectors
Features and Benefits
• Fast and economical way to install nozzles, gauges, hoses
and other fittings in piping systems.
• Reduced sediment and minimal clogging as inlet extends
into the pipe.
• Eliminates cutting, threading, brazing.
• Leak-proof seal with Buna-N clamp gasket (optional
fluoroelastomer gasket available).
• Reinstall nozzles in thread-stripped manifolds.
• Available in a variety of clamp sizes and pressure ratings.
• Connector bodies machined from bar stock brass or stainless
steel with a choice of outlet connection sizes.
• No body rotation within the flange when installing or
removing nozzles.
7521
8370
1/2" to 1" clamp size
1/8" to 1/4" outlet connection
NPT or BSPT (F)
15475
1-1/4" to 2" clamp size
1/8" to 1/2" outlet connection
NPT or BSPT (F)
2-1/2" to 4" clamp size
1/4" to 1" outlet connection
NPT or BSPT (F)
Specifications
Outside Conn.
(in.)
To Clamp On
Body
Type
7521
8370
15475
Pipe
Size
(in.)
Outside
Dia.
Tubing
in. (mm)
1/8
1/4
1/2
13/16, 7/8 (20-22)
l
l
3/4
1, 1-1/16 (25-27)
l
l
1
1-1/8, 1-1/4, 1-3/8 (32-35)
l
l
1-1/4
1-9/16, 1-11/16 (39-43)
l
l
l
l
1-1/2
1-3/4, 2 (44-51)
l
l
l
l
l
3/8
1/2
3/4
1
Maximum
Pressure
psi (bar)
250 (17)
2
2-1/8, 2-3/8 (54-60)
l
l
l
2-1/2
2-1/2, 2-7/8 (63-73)
l
l
l
l
l
3
3, 3-1/2 (76-89)
l
l
l
l
l
4
4, 4-1/2 (102-114)
l
l
l
l
l
Capacity
at Maximum
Pressure
gpm (l/min)
3.5 (13.2)
125 (9)
5.5-20* (21-76*)
125 (9)
10-54* (38-204*)
Capacities of 8370 and 15475
Vary with Outlet Conn.
Outlet
Conn.
(in.)
Capacity
gpm (l/min)
1/8
5.5 (21)
1/4
10 (38)
3/8
15 (57)
1/2
20 (76)
3/4
33 (125)
1
54 (204)
*Capacities of 8370 and 15475 vary with outlet connection
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L14
Split-Eyelet Connectors
Dimensions and Weights
Standard
A
Body
Type
A
in. (mm)
B
Drill
Hole Dia.
in. (mm)
C
Body
Inlet Dia.
in. (mm)
D
in. (mm)
Net
Weight
oz. (kg)
7521
2-1/4 (57)
9/32 (7.1)
3/16 (4.8)
11/16 (17.5)
2 (.06)
7/16 or 9/16 (11.1 or 14.3)
25/32 (20)
6 (.17)
23/32 through 1
(18.3 through 25.4)
1-1/32 (26)
24 (.68)
B
C
8370
D
3-15/32 (88) 11/16 (17.5)
15475 6-7/16 (164)
1-1/4 (32)
Based on largest/heaviest version of each type.
Materials
Material
Ordering Info
Material
Code
Split-Eyelet Type
7521
8370
15475
Zinc-plated steel clamps/bolts
with brass body
A
l
l
l
Stainless steel throughout
B
l
l
l
Zinc-plated steel clamps/bolts
with stainless connector body
C
l
l
l
Stainless steel clamps/bolts
with brass body
D
l
Buna-N clamp gasket
l
Fluoroelastomer gasket available
l
Split-Eyelet Connector
8370
l
SplitEyelet
Connector
Type
A – 1-1/4 x 1/4
l
l
l
Material
Code
Clamp
Size
Outlet
Conn.
BSPT connections require the addition
of a “B” prior to the inlet connection.
l
l
Other materials available upon request.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L15
Accessories
Split-eyelet connectors used with air atomizing nozzles
to humidify books prior to bindery operation.
Accessories
Adjustable Ball Fittings
Features and Benefits
• Allow positioning of spray nozzles for more exact control of spray direction and reduced over-spraying.
• Assure accurate pipe alignment and convenient nozzle positioning without disturbing pipe connections.
• Large internal passages minimize clogging.
• Smooth finished surfaces assure leak-proof connections.
• Key feature overview for 36275 adjustable ball fittings:
– Relatively small diameter fits applications requiring compact size.
– Simple locking holds nozzle securely in position.
– Maximum pressure rating 300 psi (20 bar).
• Key feature overview for cast ball fitting with flange:
– Locking screws hold nozzle in position securely.
– Maximum pressure rating 125 psi (9 bar).
36275
Cast Ball Fitting with Flange
Male inlet/female outlet
1/8" to 3/4" NPT or BSPT
Male inlet/female outlet
1" to 1-1/2" NPT or BSPT
Male inlet/male outlet
1-1/4" to 2-1/2" NPT or BSPT
Specifications
Adjustable
Ball Fitting
Number
36275
Total
Included
Angle of
Adjustment
Inlet
Conn.
(in.)
Outlet
Conn.
(in.)
1/8
1/8
1x1
1
1
1/4
1/4
1-1/4 x 1-1/4
1-1/4
1-1/4
1/4
1/8
1-1/2 x 1-1/4
1-1/2
1-1/4
3/8
3/8
1-1/4 x 1-1/4M
1-1/4
1-1/4*
3/8
1/4
1-1/4 x 1-1/2M
1-1/4
1-1/2*
1/2
1/2
1-1/2 x 1-1/2M
1-1/2
1-1/2*
1/2
1/4
2 x 2M
2
2*
1/2
3/8
2-1/2 x 2-1/2M
2-1/2
2-1/2*
3/4
3/4
45°
Cast
Ball Fitting
Number
Inlet
Conn.
(in.)
Outlet
Conn.
(in.)
Total
Included
Angle of
Adjustment
40°
*Male outlet connection.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L16
Adjustable Ball Fittings
Dimensions and Weights
Ball
Fitting
Type
Standard
A
36275
B
Materials
Dimensions
Pipe
Conn.
(in.)
A
in. (mm)
B
in. (mm)
Net
Weight
oz. (kg)
1/8 x 1/8
1-3/8 (34.9)
31/32 (24.6)
2 (.06)
1/4 x 1/4
1-9/16 (39.7)
1-3/32 (27.8)
3 (.09)
1/4 x 1/8
1-9/16 (39.7)
1-3/32 (27.8)
3-1/8 (.09)
3/8 x 3/8
1-25/32 (45.2)
1-3/8 (27.6)
5-1/2 (.16)
3/8 x 1/4
1-3/8 (56.4)
1-25/32 (42)
5-3/4 (.29)
1/2 x 1/2
2-7/32 (61.1)
1-21/32 (48.4)
10 (.49)
1/2 x 1/4
1-7/8 (47.6)
1-3/8 (34.9)
5-3/4 (.29)
1-7/8 (47.6)
1-3/8 (34.9)
5-3/8 (.16)
1/2 x 3/8
3/4 x 3/4
B
17 (.50)
1x1
3-1/2 (88.9)
1-13/16 (46)
64 (1.8)
1-1/4 x 1-1/4
5-1/8 (130.2)
1-13/16 (46)
76 (2.2)
1-1/2 x 1-1/4
5-1/4 (133.4)
1-13/16 (46)
80 (2.3)
1-1/4 x 1-1/4M
5-1/8 (130.2)
1-13/16 (46)
76 (2.2)
1-1/4 x 1-1/2M
5-1/8 (130.2)
1-13/16 (46)
76 (2.2)
1-1/2 x 1-1/2M
5-1/8 (130.2)
1-13/16 (46)
80 (2.3)
2 x 2M
8-1/4 (209.6)
3-1/8 (79.4)
18 lbs. (8.2)
2-1/2 x 2-1/2M
9 (228.6)
3-1/8 (79.4)
19-1/2 lbs. (8.8)
Cast
(M x F)
A
Cast
(M x M)
2-13/32 (61.1) 1-29/32 (48.4)
Material
Material Ball Fitting Type
Code
36275* Cast
Bar Stock:
Brass
(none)
l
303 Stainless Steel
SS
l
316 Stainless Steel
316SS
l
Cast:
Brass
Cast Iron
316 Stainless Steel/
303 Stainless Steel
(Bar Stock)
(none)
l
l
l
SS
l
*If inlet and outlet connections are different
sizes, material options are brass or 303
Stainless Steel. Other materials available
upon request.
Based on largest/heaviest version of each type.
Ordering Info
36275 Adjustable Ball Fitting
36275 – 1/2 x 1/2 – SS
l
l
l
l
Ball
Fitting
Type
Inlet
Conn.
Outlet
Conn.
Material
Code
Cast Ball Fitting with Flange
1
l
Inlet
Conn.
x
1
–
l
Outlet
Conn.
SS
l
Material
Code
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L17
Accessories
BSPT connections require the addition of a “B” prior to the inlet connection.
Accessories
Check Valves
Features and Benefits
• Ball-type and diaphragm check valves are available to meet a
variety of specifications.
• Ball-type valves feature a choice of 5, 10 or 20 psi (0.35, 0.7 or
1.5 bar) rated stainless steel springs.
• Either valve type provides positive drip-free shut-off to maintain
line pressure during on-and-off spraying cycles.
• Diaphragm-type valves offer line flows without pressure drop
through the valve.
AB
10742A
BB
Ball-type
1/8" to 1/4" NPT or BSPT
Ball-type
1/4" NPT or BSPT
Diaphragm-type
1/4" NPT or BSPT
Specifications
Maximum
Flow Rate
gpm (l/min)
Check
Valves
Maximum
Pressure
AB
BB
125 psi
(9 bar)
0.5 (2)
10742A
–
2 (8)
12328
–
15 (57)
2 (8)
12328
Diaphragm-type
1/2" to 3/4" NPT or BSPT
Materials
Spring Rates
Opening
Pressure
5, 10 or 20 psi
(0.35, 0.7 or 1.5 bar)
–
–
7 psi
(0.5 bar)
Material
Valve Type
Material
Code
AB BB 10742A 12328
Aluminum
AL
l
l
Brass
(none)
l
l
Stainless Steel
SS
l
l
Nylon
NYB
l
l
Other material options available upon request.
Ordering Info
Ball-Type Check Valves
Diaphragm Check Valve
1/8 AB – SS
l
l
l
20
10742A
Inlet/
Outlet
Conn.
Check
Valve
Type
Material
Code
Spring
Rating
(psi)
Check
Valve
Type
l
l
–
Diaphragm Check Valve
1/4
12328 – 1/2 – NYB
l
Inlet/
Outlet
Conn.
l
l
l
Check
Valve
Type
Inlet/
Outlet
Conn.
Material
Code
BSPT connections require the addition of a “B” prior to the inlet connection.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L18
Plug and Ball Valves
Features and Benefits
• Quick and easy in-line shut-off.
• Maximum operating pressure 400 psi (27 bar).
• Brass body with Celcon® plug/handle.
• Pipe connections also available in BSPT.
• Simple valve actuation by handle or hex allen wrench fitting.
• Several models are available to accommodate various
thread combinations.
• 20900 UniJet® ball valves provide positive on/off control for
individual nozzles and feature brass body and handle with
stainless steel ball and full UniJet system compatibility.
23220
23220
1/4F x T
1/4" NPT (F) x 11/16"-16
UniJet THD
1/4M x T
1/4" NPT (M) x 11/16"-16
UniJet THD
23220
23220
1/4M x 1/4F
1/4" NPT (M) x 1/4" NPT (F)
20900
1/4F x 1/4M
1/4" NPT (F) x 1/4" NPT (M)
On/off ball-type
1/4" NPT or BSPT (M or F)
inlet connection
11/16"-16 UniJet THD
outlet connection
Ordering Info
Plug Valve
23220 – 1/4F x 1/4F
l
l
l
Plug
Valve
Type
Inlet
Conn.
Outlet
Conn.
BSPT connections require the
addition of a “B” prior to the
inlet connection.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L19
Accessories
1/4F x 1/4F or
1/8F x 1/8F
1/4" NPT (F) to 1/8" NPT (F)
23220
Accessories
Rollover Valves
Features and Benefits
• Ideal for systems that need frequent cleaning or where two different spray patterns may be used.
• Rollover valves permit quick switch-over between two nozzles.
• All outlet connections are 11/16"-16 UniJet® threads (M).
• Complete brass construction.
• 23830 provides special swivel inlet connection that permits positioning of the spray direction.
23830
23830-1/4M
11/16"-16 UniJet THD
swivel inlet connection
23830-1/4F
1/4" NPT or BSPT (M)
inlet connection
11/16"-16 UniJet THD
outlet connection
1/4" NPT or BSPT (F)
inlet connection
11/16"-16 UniJet THD
outlet connection
Ordering Info
Rollover Valve
23830
l
Valve
Type
–
1/4M
l
Inlet
Conn.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L20
Throttling and Pressure Relief/Regulating Valves
Features and Benefits
• Throttling valves regulate flow in systems equipped with
centrifugal pumps.
• Key feature overview for 9840 pressure relief valve:
– Diaphragm design pressure relief valve.
• Adjustable pressure relief valves accurately control spray line
pressures – liquid waste caused by excessive pressures is
minimized as excess liquid is bypassed back to the liquid source
or pump inlet.
• Key feature overview for 23520-PP throttling valve:
– Compact throttling valve with adjusting cap and lock ring.
– Aluminum, brass or ductile iron housing with nylon inlet body.
– Fairprene diaphragm seals off all working parts from contact
with liquid and provides responsive, chatter-free operation.
– Features additional port for pressure gauge installation.
• Key feature overview for 6815 pressure relief valve:
– Piston-type pressure relief valve.
– Polypropylene construction features excellent chemical
resistance.
– Full flow with minimum pressure loss due to extra large valve
passage.
• Key feature overview for 23120-PP pressure relief valve:
– Polypropylene body with nylon adjusting cap means excellent
chemical resistance.
– Free-floating seat design improves overall speed and
sensitivity of the valve action.
– Aluminum, brass or stainless steel construction.
• Key feature overview for 110 pressure relief valve:
– Piston-type pressure relief valve.
– Easily hand-adjustable pressure relief valve.
– Maintain line pressure with adjustable locknut.
• Key feature overview for 8460 pressure relief valve:
– Diaphragm design pressure relief valve.
– Guide vane seat stabilizes flow and reduces chatter.
– Removable valve bonnet for service without disturbing fluid
line connections.
– Aluminum housing with nylon inlet body.
– Fairprene diaphragm seals off all working parts from contact
with liquid and provides responsive, chatter-free operation.
®
– Full flow with minimum pressure loss due to extra large valve
passage.
– Features additional port for pressure gauge installation.
– Free-floating seat design improves overall speed and
sensitivity of the valve action.
– Aluminum, brass or stainless steel construction.
Throttling valve
23120-PP
8460
Pressure relief valve
Pressure relief valve
(Aluminum housing/
nylon inlet body)
6815
9840
Pressure relief valve
(Brass, aluminum or
ductile iron body)
110
Pressure relief valve –
extra large passage
Pressure relief valve –
extra large passage
with guide vane seat
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L21
Accessories
23520-PP
Accessories
Throttling and Pressure Relief/Regulating Valves
Specifications
Inlet/Outlet
Pipe Conn.
(in.)
1/4
3/8
Operating
Pressure
Max. psi (bar)
Valve Type
23520-PP 23120-PP
8460
9840
9840-AL
9840-DI
6815
6815-HSS 6815-AL
110
Up to 300 (20)
l
300 to 700 (20 to 48)
l
700 to 1000 (48 to 70)
l
Up to 300 (20)
l
300 to 700 (20 to 48)
l
700 to 1000 (48 to 70)
Up to 150 (10.4)
l
l
l
l
l
l
Up to 300 (20)
l
l
l
l
300 to 700 (20 to 48)
l
700 to 1200 (48 to 85)
l
Up to 50 (3.5)
Up to 150 (10.4)
3/4
110-DI
l
Up to 50 (3.5)
1/2
110-AL
l
l
l
l
l
l
l
l
Up to 300 (20)
l
l
l
l
300 to 700 (20 to 48)
l
700 to 1200 (48 to 85)
l
l
l
1
Up to 150 (10)
l
l
1-1/4
Up to 150 (10)
l
l
1-1/2
Up to 150 (10)
l
l
Dimensions and Weights
Materials
Length
in. (mm)
Net
Weight
oz. (kg)
Material
23520-PP
4-3/8 (111)
2-1/4 (.06)
Aluminum
AL
l
l
l
23120-PP
5-1/4 (133.4)
5-3/4 (.19)
Brass
(none)
l
l
l
8460
8 (203)
14-1/2 (.41)
Ductile Iron
DI
l
9840
8-1/2 (216)
32 (.91)
Hardened Stainless Steel
HSS
6815
6-5/8 (168)
20 (.57)
Nylon/Aluminum
NY
110
7-3/4 (197)
56 (1.6)
Polypropylene
PP
Valve
Type
Based on largest/heaviest version of each type.
Valve Type
Material
Code
23520-PP 23120-PP 8460 9840 6815* 110
l
l
l
l
l
l
*Brass and aluminum only for operating pressures up to 700 psi;
hardened stainless steel only for pressures from 700 to 1200 psi.
Other materials available upon request.
Ordering Info
Pressure Relief/Regulating Valve
9840
l
Valve
Type
–
1/2
l
Inlet/
Outlet
Conn.
–
AL
l
Material
Code
Pressure Relief/Regulating Valve
6815 – 1/2 – AL –
l
l
l
Valve
Type
Inlet/
Outlet
Conn.
Material
Code
50
l
Pressure
Rating
Throttling Valve
23520 –
l
Valve
Type
1/2
l
Inlet/
Outlet
Conn.
–
PP
l
Material
Code
BSPT connections require the addition of a “B” prior to the inlet connection.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L22
Solenoid Valves
Features and Benefits
• Control on/off flow in automatically operated systems.
• Stainless steel pilot orifice helps eliminate premature leaking and
increases service life in high flow velocity situations.
• Dependable service in both air and liquid lines with
temperatures from 40° to 165°F (5° to 75°C).
• Kel-F® or Viton® seals are molded into stainless steel floating
bottom plungers.
• Ten watt, class “F” coils are for continuous duty, UL and
CSA approved.
• Floating plungers automatically compensate for vibration, shock,
wear and deformation while providing a bubble-tight seal.
• Coils are rated for dual frequency operation suitable for
international use.
• Buna-N diaphragm valves.
• Encapsulated coil resists high humidity and fungus growth.
• Versatile mounting in any position, direct pipe mounting.
• 360° rotation available with durable electrostatically
powder-coated enclosure.
• Choose valve action to meet specifications, either diaphragm,
pilot-operated or direct acting poppet.
• 38680 quick exhaust valve increases line exhaust to a full 1/4" port
(Cv=1.0) resulting in quick shut-off of spray guns without spitting.
• Stainless steel or brass bodies.
2-Way
38680 Quick
Exhaust Valve
3-Way
1/4" to 1" NPT (F)
1/4", 1/2" NPT (F)
1/4" NPT (F)
Air atomizing
nozzles
Air pressure
regulator with
gauge
Electrical
cables
Air filter
Coating of electrical cables using solenoid valves, air pressure
regulator, air atomizing nozzles and other accessories.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L23
Accessories
Pressure tank
assembly
Solenoid
valve
Accessories
Solenoid Valves
Dimensions and Weights
Valve
Type
Standard
B
C
2-way
D
A
Ordering Info
Model
Number
A
in. (mm)
B
in. (mm)
C
in. (mm)
D
in. (mm)
11438-20
1-5/8 (41.3)
2-29/32 (73.8)
1-15/16 (49.2)
11/32 (8.7)
11438-21
1-5/8 (41.3)
2-29/32 (73.8)
1-15/16 (49.2)
11/32 (8.7)
1-31/32 (50)
3-9/16 (90.5)
2-19/32 (65.8) 19/32 (15.0)
11438-22
11438-23
2-21/32 (67.5) 4-13/32 (111.9) 3-13/32 (86.5) 17/32 (13.5)
11438-24
3-15/16 (100)
4-3/4 (120.6)
3-23/32 (94.5)
7/8 (22.2)
11438-25
3-15/16 (100)
4-3/4 (120.6)
3-23/32 (94.5)
7/8 (22.2)
11438-30
1-9/16 (39.7)
3-3/4 (95.2)
2-3/4 (69.8)
1-1/8 (28.6)
11438-31
3-3/32 (78.6)
5-5/8 (143)
3-5/32 (80.2)
1-1/16 (27)
11438-20
l
Model
No.
*110 or 120 V, 50/60 Hz coil is
standard. If other coil assemblies are
desired, add the appropriate letter
code to the end of the part number.
For example: 11438-20A.
A = 220 or 240 V, 50/60 Hz
B = 24 V, 60 Hz
B
C
Complete Solenoid Valve*
3-way
C = 12 VDC
D = 24 VDC
D
A
Quick
exhaust
11438-32
1-3/8 (34.9)
4-3/8 (111.1)
3-3/4 (95.2)
1-1/2 (38.1)
38680-1/4-AL
1-3/8 (34.9)
1-7/8 (47.6)
–
–
Based on largest version of each type.
Specifications
Port
Conn.
(in.)
Model
Number
1/4
11438-20
1/4
11438-21
3/8
11438-22
1/2
11438-23
3/4
11438-24
1
11438-25
1/4
11438-30
1/2
11438-31
3/8
11438-32
1/4
Valve
Type
2-way
Max.
Pressure
psi (bar)
Orifice
Size
in. (mm)
Cv
Factor†
Body
Material
Seal
Material
Direct Acting 60* (4*)
Poppet
205* (14*)
3/16 (4.8)
.50
Viton®
1/8 (3.2)
.28
Stainless
steel
150* (10*)
7/16 (11)
2.5
150* (10*)
5/8 (16)
4.0
230 (16)
3/4 (19)
7.8
Valve
Action
PilotOperated
Diaph.
Poppet
3-way
38680-1/4-AL Quick exhaust
Diaph.
–
Forged
or
cast
brass
Kel-F®
Buna-N
230 (16)
1 (25.4)
13.0
100 (7)
3/32 (2.4)
.25/.38
150 (10)
1/2 (12.7)
3.6
Forged or
cast brass
Buna-N
150 (10)
7/16 (11.1)
1.6/2.5
Aluminum
Buna-N
150 (10.7)
–
1.0
Zinc and
aluminum
die cast
Buna-N
Viton
*For maximum pressures of coils “C” and “D”, request Data Sheet 11438 – Solenoid (1).
†For use of Cv Factor, request Data Sheet 11438 – Solenoid (2).
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L24
Air Pressure Regulators
Features and Benefits
11438
• Diaphragm-type air pressure regulators feature a balanced valve design.
• Relieving style automatically relieves excessive pressure in a regulated line.
• Regulated line pressure can be reduced with adjusting knob even when line is dead ended.
• Non-relieving regulator available.
• Bodies and bonnets constructed of die cast aluminum, zinc or stainless steel.
• Stainless steel versions meet NACE standard MR-01-75 for corrosion resistance.
• Regulated pressures from 5 to 125 psi (0.3 to 8.5 bar) with supply line pressures up to 300 psi (20 bar).
Air pressure regulator
• Operating temperature range maximums are 0° to 175°F (–15° to +80°C) with dewpoint less than air
temperatures below 35°F (2°C).
• Gauges supplied separately.
Regulators
Relieving-Type
Main
Port
(in.)
Gauge
Ports
(in.)
1/4
1/4
l
1/4
1/8
l
3/8
1/4
l
1/2
1/4
l
1/2
1/4
l
3/4
1/4
l
l
1
1/4
l
l
Regulator Type
Relieving Non-Relieving
Regulator
Number
Material
11438-45
Zinc
Non-Relieving-Type
Main Gauge
Ports Ports
(in.)
(in.)
Regulator
Number
11438-
Main
Ports
(in.)
Gauge
Ports
(in.)
1/4
1/4
11438-35
Zinc
1/4
1/4
1/4
1/8
11438-36
Zinc
3/8
1/4
l
11438-46
Zinc
3/8
1/4
11438-37
Zinc
1/2
1/4
l
11438-47
Zinc
1/2
1/4
11438-38
Aluminum
3/4
1/4
11438-47S 316 Stainless Steel
1/2
1/4
11438-39
Aluminum
1
1/4
11438-48
Aluminum
3/4
1/4
11438-49
Aluminum
1
1/4
A
in. (mm)
B
in. (mm)
35, 36, 45, 46 3-11/16 (94) 1-7/16 (37)
C
Material
11438-45S 316 Stainless Steel
l
Dimensions and Weights
Standard
Regulator
Number
Ordering Info
C
in. (mm)
D
in. (mm)
E
in. (mm)
5-1/8 (130)
2-3/4 (70)
2 (51)
2-1/4 (57)
A
37, 47
4-3/8 (111)
1-1/2 (38)
5-7/8 (149)
3-1/2 (89)
38, 39, 48, 49
4-1/2 (114)
2-3/8 (60)
6-7/8 (174)
4-1/4 (108) 2-1/4 (57)
45S
2-3/8 (60)
3/8 (10.0)
2-3/4 (70)
1-1/2 (38)
1-1/2 (38)
47S
6-3/16 (157)
1-5/8 (41)
7-13/16 (198)
3-1/2 (89)
2-1/4 (57)
Air Pressure Regulator
11438-45
l
Regulator
No.
B
D
E
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L25
Accessories
Based on the largest version of each type.
Accessories
Liquid Pressure Regulators
Features and Benefits
11438
• Diaphragm-type non-relieving liquid pressure regulators.
• Bodies constructed of brass or brass-plated zinc.
• Regulated pressures from 5 to 125 psi (0.3 to 8.5 bar) with primary supply line pressures.
• Operating temperature range maximums are 35° to 200°F (2° to 93°C).
• Gauges supplied separately.
Liquid pressure regulator
Specifications
Dimensions and Weights
Regulator
Type
Max.
psi (bar)
Main
Ports
(in.)
Gauge
Port
(in.)
Body
Material
11438-250
400 (28)
1/4
1/4
Brass
11438-251
400 (28)
3/8
1/4
Brass
11438-252
400 (28)
1/2
1/4
Brass
11438-253
400 (28)
3/4
1/8
Brass
11438-254
400 (28)
1
1/8
Standard
A
A
in. (mm)
B
in. (mm)
C
in. (mm)
D
in. (mm)
E
in. (mm)
250, 251
4-1/4 (108)
1-1/2 (38)
5-3/4 (146)
2-3/4 (70)
2-5/16 (59)
C
B
252
D
Brass
Regulator
Number
11438-
4-5/16 (109.5) 1-19/32 (40) 5-15/16 (151) 3-5/16 (84) 2-7/16 (62)
E
253, 254
Ordering Info
7-7/8 (200)
1-5/8 (41)
9-1/2 (241)
5 (127)
4-7/8 (124)
Based on largest version of each type.
Liquid Pressure
Regulator
11438-250
l
Typical installation
Regulator
No.
Air pressure regulator
with gauge
3-way
solenoid
air valve
Air filter
Air line
Liquid pressure regulator
with gauge
Hanger rod
Liquid line
Air line
TW line
strainer
Air filter
Automatic
spray guns
2-way
solenoid
air valve
Air pressure
regulator
with gauge
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L26
Liquid Pressure Gauges
26383
Features and Benefits
• Available in bottom inlet connection or center back connection.
• Eleven bottom inlet models available from a minimum of 0 psi to a maximum of 300 psi (0 bar to a
maximum of 20 bar).
• Bottom inlet gauge has 2-1/2" diameter housing and back connection gauge has 2" diameter case.
• Patented spring suspended movement protected by a corrosion- and impact-resistant ABS housing
with polycarbonate window.
Pressure gauge
(Center back connection)
26385
• All wetted parts are brass with a combination brass/bronze connection and bourdon tube.
• Dual scales in psi and bar.
• Grade B accuracy within ±2% in the middle 50% of the scale, with 3% accuracy in the high and low
ends of the scale.
• 26383 has a center back connection with NPT (M) pipe connections in 1/8" or 1/4" sizes.
• Gauges are housed in a 2" diameter ABS case.
Specifications
1/8
1/4
1/8
26383
1/4
1/8
1/4
Pressure
Range
psi (bar)
Inlet
Gauge
Conn.
Type
(in.)
0–60 (0–4)
26385
1/4
0–100 (0–7)
Max.
psi (bar)
Optimum
Operating
Range
psi (bar)
60 (4.1)
15–45 (1.0–3.1)
100 (7)
25–75 (1.7–5.2)
160 (11)
40–120 (2.8–8.3)
300 (20.7) 75–225 (5.2–15.5)
0–160 (0–11)
Ordering Info
Pressure Gauge
26383 –
l
Gauge
Type
1/8
l
Inlet Conn.
Size
–
Pressure Gauge
60
26385 –
l
l
Pressure
Rating
Gauge
Type
60
l
Pressure
Rating
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L27
Accessories
Pressure gauge
(Bottom connection)
Inlet
Gauge
Conn.
Type
(in.)
Accessories
Snubbers
Features and Benefits
39194
• Designed to dampen pressure gauge action on a rapidly cycled air line.
• For use with air actuated spray guns.
• Prolongs pressure gauge service life.
Gauge snubber
• Improves readability of the pressure gauge.
• Easy disassembly for cleaning.
Dimensions and Weights
Dimensions
Standard
Length
in. (mm)
1-27/32
(47)
Hex
in. (mm)
13/16
(21)
Specifications
Gauge
Snubber
39194
Max. Inlet Gauge
psi Conn. Port
(bar) (in.)
(in.)
300
(20)
1/8
1/8
1/4
1/8
1/4
1/4
Ordering Info
Body
Material
Brass
with
stainless
steel
orifice
plate
Gauge Snubber
39194 – 1/8M x 1/8F
l
l
l
Gauge
Snubber
No.
Inlet
Conn.
Size
Gauge
Port
Size
Based on largest version.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L28
Air Line Filters
11438
Features and Benefits
• Protects equipment from corrosion and excessive wear by removing liquid and contaminants
from air lines.
• 11438-16, -17, -1, -2, -3 have screw-on transparent polycarbonate bowls with bowl guards for
breakage resistance. These models are not for use in systems where the air compressors are
lubricated with fire-resistant synthetics.
• All bowls have a 50 micron filter element and are designed to operate at maximum pressure of
150 psi (10 bar) and a maximum temperature of 125°F (50°C).
• Manual drain air filter features a simple petcock at the bottom of the bowl for manual drainage
and an easily accessible filter.
• Automatic drain air filter is specially designed for use in inaccessible locations and features a
float-operated mechanism that automatically expels liquid when it is over a critical level.
Manual Drain
Automatic Drain
Approx. Flow at
100 psi* (7 bar*)
Air Filter NPT
Type
Conn.
Air Filter NPT
Type
Conn.
Approx. Flow at
100 psi* (7 bar*)
scfm
l/min
scfm
l/min
11438-1
1/4
50
1415
11438-16
1/4
50
1415
11438-2
3/8
50
1415
11438-17
1/2
150
4250
11438-3
1/2
150
4250
11438-19
1
445
12600
11438-4
3/4
345
9770
11438-5
1
445
12600
*With 5 psi (0.35 bar) pressure drop through filter.
*With 5 psi (0.35 bar) pressure drop through filter.
Dimensions and Weights
Standard
B
D
A
C
E
Air
Filter
Type
A
in. (mm)
11438-1
6-5/8 (168)
11438-2
11438-3
11438-4
11-1/2 (292) 1-1/16 (27)
10-7/16 (265)
4-3/4 (121)
4-9/16 (116)
11438-5
11-1/2 (292) 1-1/16 (27)
10-7/16 (265)
4-3/4 (121)
4-9/16 (116)
B
in. (mm)
C
in. (mm)
D
in. (mm)
E
in. (mm)
11/16 (18.0) 5-15/16 (150)
2-3/4 (70)
2-5/16 (59)
6-5/8 (168)
11/16 (18.0) 5-15/16 (150)
2-3/4 (70)
2-5/16 (59)
7-3/8 (187)
11/16 (18.0) 6-11/16 (169) 3-29/32 (99)
3 (76)
11438-16
7 (178)
11/16 (18.0)
6-5/16 (160)
3-5/8 (92)
3 (76)
11438-17
7 (178)
11/16 (18.0)
6-5/16 (160)
3-29/32 (99)
3 (76)
11438-19 11-1/8 (283) 1-1/16 (27)
10-1/16 (256)
4-3/4 (121)
4-9/16 (161)
Based on the largest version of each type.
Ordering Info
Air Filter
11438-1
l
Air Line Filter Type
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L29
Accessories
Air line filter
Accessories
Liquid Strainers, Low to Medium Pressure
Features and Benefits
• Designed for effective strainer performance with minimal
maintenance.
• Key feature overview for 16106:
– Operates at pressures up to 200 psi (14 bar).
• Protect nozzles, valves and pumps from damaging debris.
– Similar in design to standard TW strainers.
• Large open screen area for efficient liquid straining at pressures
up to 125 psi (9 bar).
– A bottom pipe plug provides an easy method for flush cleaning.
• Key feature overview for 9830:
– For high pressure applications up to 300 psi (20 bar).
• Removable bottom pipe plugs for easy flush cleaning.
• Key feature overview for TW liquid strainer:
– Removable bottom cap or plug for complete withdrawal of
entire screen assembly.
– Designed for easy maintenance.
– A ribbed cap with gasket seal is easily removed by hand for
screen access.
• Key feature overview for 122-PP and 122-NYC:
– Ideal for low volume applications at medium pressures.
– Bottom pipe plug can be replaced with drain cock for quick
flush cleaning.
• Key feature overview for TWC liquid strainer:
– Handles large flow rates with minimal pressure drop.
– Hand-removable guide bowl for easy maintenance.
– Polypropylene bowl and head are corrosion and chemical
resistant.
– 1" plugged top outlet for pressure gauge installation.
– Bottom pipe plug can be replaced with drain cock for quick
flush cleaning.
– NYC features clear nylon bowl for easy visual inspection of
internal screen.
• Key feature overview for TWF liquid strainer:
– Handles extra large flow rates with minimal pressure drop.
– Flange mounting hole sizes and locations meet American
Standard 125 specifications.
See Also
– 1" plugged top outlet for pressure gauge installation on
some sizes.
• Catalog 35 for complete specifications.
TW
1/4" to 2-1/2" NPT or BSPT (F)
9830
3/4" to 1" NPT or BSPT (F)
(300 psi/21 bar)
TWC
TWF
2-1/2" to 4" NPT or BSPT (F)
3" to 6" flange connection
122-PP
http://
16106
1-1/2" to 2-1/2" NPT or BSPT (F)
122-NYC
1/2" to 3/4" NPT or BSPT (F)
1/2" to 3/4" NPT or BSPT (F)
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L30
Liquid Strainers, Low to Medium Pressure
Features and Benefits
See Also
• Key feature overview for 124 and 430 liquid strainers:
– Six models to meet particular specifications.
• Catalog 35 for complete specifications.
http://
– Ideal for maximum flow rates.
– Extra large stainless steel screens require less frequent
cleaning and maintenance.
– 124A-SC is a self-cleaning design that allows the filtered liquid
to pass through the strainer while liquid particles are returned
to the liquid supply.
– 124ML-AL, 430-ML and 430-SC feature drilled holes for
mounting to machinery or an angle iron.
124-I
3/4" to 2-1/2" NPT or BSPT (F)
124-AL
124ML-AL
3/4" to 2-1/2" NPT or BSPT (F)
3/4" to 2-1/2" NPT or BSPT (F)
124A-SC
3/4" to 1" NPT or BSPT (F)
430-ML
and 430-SC
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L31
Accessories
3/4" to 1-1/2" NPT or BSPT (F)
Accessories
T-Style Strainers, High Pressure
Features and Benefits
See Also
• Three models to meet particular specifications.
• Catalog 35 for complete specifications.
http://
• For pressures up to 2000 psi at 150°F (138 bar at 66°C) and
5000 psi at 150°F (345 bar at 66°C).
• Key feature overview for 15925 high pressure strainer:
– Easy flush cleaning with removable bottom pipe plug.
• Key feature overview for 8310A high pressure strainer:
– Easy flush cleaning with removable bottom pipe plug.
– Screens available with a variety of mesh sizes.
• Key feature overview for 2820 high pressure strainer:
– In-line strainer.
– Choice of stainless steel or Monel® screens in a variety of
mesh sizes.
15925
3/4" to 1" NPT or BSPT (F)
8310A
2820
1/4" to 1/2" NPT or BSPT (F)
1/4" to 1/2" NPT or BSPT (F)
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L32
Self-Cleaning Strainers
AWS Series
Features and Benefits
• Unique, effective filtering process allows use of poor quality water and minimizes the risks of
nozzle clogging.
• Large filter area captures most contaminants and extends time between flush intervals.
• Wide filtration range – 20 to 600 mesh (800 to 10 microns).
• Minimal water flow used for cleaning/flushing so downstream water supply is not interrupted.
• Easy to use – automatic operation.
AWT Series
• Easy to maintain – self-cleaning.
• Key feature overview for the AWS Series:
• Key feature overview for the AWT Series:
– Automatic flushing at pre-set pressure drop
trip point of 7 psi (0.5 bar) or at pre-set time.
– Pressure drop trip point: 7 psi (0.5 bar).
– Flush cycle: 14 to 40 seconds; continuous
flush option.
– Large screen filter area: 109 in2 (703 cm2).
– Flush cycle: 16 seconds.
– Flow rates up to 220 gpm (833 l/min).
– Large screen filter area: 233 – 930 in2
(1503 to 6000 cm2).
– Max. working temperature: 140°F (60°C).
– Flow rates up to 1760 gpm (6662 l/min).
– Inlet/outlet diameters: 2" to 3" NPT or BSPT.
– Max. working temperature: 140°F (60°C).
– 30 to 300 mesh (500 to 50 micron)
filtration range.
– Inlet/outlet diameters: 2" to 10" flange
connection.
– Exhaust valve: 1-1/2".
– Corrosion-resistant polyamide construction.
– 20 to 600 mesh (800 to 10 micron)
filtration range.
– Voltage: 110 V, 1 phase.
– Exhaust valve: 2".
– Steel construction with NSF approved
epoxy-coated internals.
– Voltage: 220/380/440 V, 3 phase; 50/60 Hz.
Applications
Specifications
• Makeup water in steel production
• Tank washing
Model No.
Minimum
Working
Pressure
psi (bar)
Maximum
Working
Pressure
psi (bar)
Minimum
Flow Rate
for Flushing
gpm (l/min)
Maximum
Flow Rate
gpm
(l/min)
Max.
Working
Temperature
°F (°C)
AWS-1500
30
(2)
150
(10)
26
(98)
350**
(1325)
140
(60)
AWS-3000
30
(2)
150
(10)
50
(189)
660*
(2498)
140
(60)
AWS-4500
30
(2)
150
(10)
66
(250)
1100*
(4164)
140
(60)
AWS-6000
30
(2)
150
(10)
110
(416)
1760*
(6662)
140
(60)
AWT-750-2
30
(2)**
115
(8)
35
(132)
110
(416)
140
(60)
AWT-750-3
30
(2)**
115
(8)
35
(132)
220
(833)
140
(60)
• Cooling towers
• Pasteurization process
• Process water
• Intake water
*Larger flow rates can be filtered by using multiple filters in parallel
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L33
Accessories
**Or lower, if pressure is increased for flushing
Accessories
Swivel Connectors, Eductors,
Filtration Assemblies
Features and Benefits
• Key feature overview for single swivel and double
swivel connectors:
– Allow exact positioning of spray nozzles within the swivel arc
range which can be 280° or 360°.
• Key feature overview for 39185 filtration assembly:
– Removes grit, scale and organic solids to help keep spray
nozzles clean and clog-free.
– Removes slimy solids and algae from process water without
premature loading.
– Single or double swivel bodies available.
– Extra solids holding capacity provides long service life and
reduced maintenance.
– Easy-turn locknut holds swivel in place with no slipping.
– Operate at pressures up to 125 psi (9 bar).
• Key feature overview for 22629-SS swivel nut branch tee:
– Branch tee provides liquid recirculation.
– Ideal for industrial and potable water applications.
– Low pressure drop and exceptional flow capacity.
– No tools required for disassembly or cleaning.
– Maximum operating pressure: 2000 psi (138 bar).
• Key feature overview for 46550 eductor:
– Tank mixing eductor nozzle increases circulation rates of small
pumps by 4:1 ratio.
– Prevents settling as agitation assures uniform mixture of
chemical solutions.
See Also
– Capable of circulating large volumes of liquid.
– Constructed of cast 316 Stainless Steel or fiberglass-reinforced
polypropylene for excellent chemical and heat resistance.
http://
• Catalog 35 for complete specifications.
– Variety of threaded connections available.
Single Swivel
1/8" to 1/4" NPT or BSPT (F)
Double Swivel
1/8" to 1/4" NPT or BSPT (M)
46550
22629-SS
1/2"-20 J.I.C. (M)
inlet/outlet connections
(1/2"-20 J.I.C. (F) outlet to gun)
39185
1/4" to 1-1/2" NPT or BSPT (M)
3/4" NPT or BSPT (F)
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L34
Hoses and Mounting Bases
Features and Benefits
• Key feature overview for Stay-N-Place hoses:
– For fast, precise nozzle placement, these bendable hoses won’t
move once set in place.
• Key feature overview for magnetic mounting bases:
– Fast, easy set-up of air nozzles from application to application.
– Flexible, works with most any set-up.
– Easy-to-use, flexible source of targeted air that is changeable
from application to application.
– Permits both vertical and horizontal mounting set-ups.
– Shut-off valve for added control.
– Complete control for very targeted, precise air blow-off.
– Single or double outlet models available.
– Works with a variety of air control nozzles.
– Build your own configuration to fit your unique applications.
– Blow-off, parts drying and cooling and lubrication are typical
applications.
Stay-N-Place Hose
Magnetic Mounting Base
57025 (M)
57020 (F)
57045
See Also
http://
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
L35
Accessories
• Compressed Air and Liquid Spray Accessories