Market success
without interferences
Thanks to smooth EMC testing
TÜV SÜD Product Service GmbH
We ensure your access to the market – without
interference
We are happy to accompany you wherever you see
future markets for your products. With our long-standing
experience regarding the range of international EMC
require­ments, we can assist you in marketing your
products suc­cessfully throughout the world.
By testing your products and documenting their effective
protection against and free­dom from electromagnetic
interference, we ensure their smooth market entry.
Our excellently qualified experts, modern equipment and
efficient processes enable us to perform all the required
tests rapidly and smoothly so that we can offer these
services at favorable terms.
Our range of EMC services
We act as your partner in ensuring that your products
comply with legal requirements. For example, with respect
to EMC we test your products in accordance with the
EN/IEC 61000-4 series (immunity), product standards such
as CISPR 11, CISPR 14, CISPR 22 and all generic standards
of the EN/IEC 61000-6 series (radio disturbance). In addition,
we verify compliance with automotive standards and
company standards in the automotive industry. We also
offer testing in accordance with:
ƒƒ ETSI standards
ƒƒ ISO, EUROCAE, SAE, MIL and VG standards
ƒƒ EMC standards of the classification societies for ships
and marine-related facilities
ƒƒ FCC parts 15, 18
Our range of EMC and radio testing services
For radio systems we carry out approval testing based on:
ƒƒ ETSI standards, e.g. for low-power devices, PMR,
telemetry applications and radio remote controls
ƒƒ FCC parts 15, 18, 74, 80
ƒƒ Industry Canada standards
ƒƒ Further national and international standards
In addition to the above, our range of servi­ces also
embraces tests ensuring product safety and radio
frequency exposure tests. This enables us to carry out
conformity assessments to verify the compliance of your
products with the R&TTE Directive (1999/5/EC).
Our range of EMC services in the
automotive sector
To succeed in the automotive industry, you must be able
to guarantee compliance with the applicable standards.
We are happy to provide support: We inspect automotive
components as per CISPR 25 and ISO 11452, measure
emissions as per CISPR 12 and CISPR 25, and pro­vide
testing in line with the company standards of almost all
automotive manu­fac­turers. By ensuring rapid and smooth
work­flows, we provide you with a genuine compe­titive edge.
Benefit from our comprehensive equipment under
one roof
Due to continuous and consistent service expansion, we
can offer cutting-edge tech­no­logical equipment in 3,500 m2
of office and laboratory space. All relevant tests are carried
out on-site at our premises, enabling time-efficient process
coordination and streamlining.
ƒƒ 4 anechoic chambers and 4 shielded rooms
ƒƒ ESD generator as per ISO/TR 10605 up to a maximum
discharge voltage of 30 kV
ƒƒ Harmonic and flicker test system with 3-phase 10 kVA
ƒƒ ETSI-conforming radio measurement test sites
Perfection to the smallest detail – our equipment
Dimensions, supplies and monitoring of test items
ƒƒ 3 m fully anechoic chamber for emission measurements
at frequency ranges up to 18 GHz
ƒƒ 10 m semi-anechoic chamber for measurements
up to 18 GHz
ƒƒ Anechoic chamber for component testing as per ­
CISPR 25 and ISO 11452 at frequency ranges
up to 18 GHz
ƒƒ 3 m semi-anechoic chamber for electro­magnetic
interference and immunity testing
ƒƒ Electromagnetic interference measurements
up to 110 GHz
ƒƒ Testing of immunity to electromagnetic fields: ­
9 kHz to 18 GHz, maximum field strength > 200 V/m
ƒƒ Bulk current injection as per ISO 11452
up to 1 A RF current
ƒƒ 90 ohm stripline as per ISO 11452,
field strength > 300 V/m
ƒƒ Shielded rooms for 3-phase conducted emission
and immunity testing
ƒƒ Amplifier output:
- 1,000 W from 9 kHz to 1 GHz
- 500 W from 1 GHz to 4 GHz
- 100 W from 2 GHz to 6 GHz
- 20 W from 8 GHz to 18 GHz
ƒƒ Measurement distance: up to 10 m
ƒƒ Turntable diameter: 6 m
ƒƒ Load capacity of turntable: up to 6 t
ƒƒ Supply of test specimens:
-A
C, max. 63 A for each phase of the
3-phase current
-D
C 80 V/50 A available, supply possible via filter up to a
maximum of 1,000 VDC/63 A
- Compressed air
- Water (inlet and outlet)
ƒƒ Access to chamber: at ground level through
4.2 x 4.2 m gate
ƒƒ Monitoring of test specimens:
- Various optical interfaces for AC/DC, LIN,
CAN high speed, CAN low speed, RS 232, USB, K line
- EMC-protected audio and video systems
Additional services
ƒƒ Environmental simulation (e.g. tempera­ture, climate,
thermal shock, vibration, mechanical shock, mechanical
testing integrated with temperature testing)
ƒƒ Product safety
Our certifications (registrations) and
accreditations
ƒƒ Deutsche Akkreditierungsstelle (DAKKS, German
accreditation body): accreditation for standards in the
fields of EMC, radio, equipment safety, environmental
simulation
ƒƒ Kraftfahrt-Bundesamt (KBA, German Federal Motor
Transport Authority): designation as a technical service
for EMC testing of electronic components
ƒƒ Transportstyrelsen: accreditation for EMC testing of
electronic components
ƒƒ Federal Communications Commission, USA (FCC):
registration for the approval of measurement results
from our testing laboratory
ƒƒ Industry Canada (IC): registration for the approval of
measure­ment results from our 3 m and 10 m test sites
www.tuev-sued.de/ps/emv
TÜV SÜD Product Service GmbH
Äussere Frühlingstr. 45
94315 Straubing
Phone: +49 89 5008-4747
Email: productservice@tuev-sued.de
www.tuev-sued.de/ps/emv
November 2012/54 EU
productservice@tuev-sued.de