m9710/m9730 - Hydrel
advertisement
M9710/M9730 Modular In-Grade Luminaire Single Lens TYPE Specifications 12” 305 mm 12” 305 mm 16” 407 mm W: H: NOTES L: CATALOG NUMBER ­ DESCRIPTION Hydrel’s M9710/M9730 Series modular in-grade lights are multi-purpose units designed for uplighting of architectural and landscape features. These units can be flushed mounted into a variety of substrates or landscape materials. The M9710/M9730 consists of a factory-sealed lamp module and encapsulated power module. The components are secured inside a heavy-duty polymer rough-in housing designed with channeled convective cooling, an integral junction box, and finish door trim assembly. Example: M9710 A 150CMT6 MVOLT NSP FLC 34B ISS GEB LP BL Ordering information (60HZ) M9710 A 150CMT6 Model Door Material Lamp Type 277 NSP FLC Voltage Distribution 6 Lens 120 NSP4 Narrow Spot FLC Flat Lens Clear FLC5 Flat Lens Clear, 5º Axial Spread M9710 Round A Aluminum INCANDESCENT2 MH M9730 Square B Bronze P3883I18 PAR38, Med. 35CMT6 T6, G-12 50S15 E17, Med. 208 SS Stainless Steel P38150I PAR38, Med. 70CMT6 T6, G-12 70S E17, Med. 240 SP Spot 100Q T4 150CMT61 T6, G-12 100S E17, Med. 277 NFL 150Q T4 50M15 E17, Med. 150S E17, Med. 347 Narrow Flood 250Q T4 70M E17, Med. MFL 70CM E17, Med. Medium Flood FLC10 FLUORESCENT 3 Flat Lens Clear, 10º tilt 18TRT Triple Tube, GX24q2 100M E17, Med. FL 5 Flood FLC20 26TRT Triple Tube, GX24q3 100CM E17, Med. WFL Wide Flood Flat Lens Clear, 20º tilt 32TRT Triple Tube, GX24q3 150M1 E17, Med. FLF Flat Lens Frosted 42TRT Triple Tube, GX24q3 150CM E17, Med. FLCAS P3870M PAR38, Med. Flat Lens Clear, AntiSlip FLC5SR20 1 P3870CM PAR38, Med. P38100M PAR38, Med. P38100CM PAR38, Med. WWD14 Wall Wash Distribution FLC5AS Flat Lens Clear, 5º Axial Spread, Anti-Slip ISS SF LP Conduit Entries Accessories Options Lamp Finish13 Flat Lens Clear Slip Resistant 12B 1/2” NPT Bottom Internal LP BL Black IHL17 Honeycomb Louver BTR Brass Round PC2112 Potting Compound BZ Bronze Flat Lens Clear, 5º Axial Spread, Slip Resistant 12S 1/2” NPT Side ISS7 Source Shield BTS Brass Square Fusing DDB Dark Bronze STR Stainless Round Single Fuse 3/4” NPT Bottom Linear Spread Filter SF10 34B LSF17 DNA CFAMB17 Color Filter Amber STS Stainless Square DF11 Double Fuse Natural Alum. 34S 3/4” NPT Side FLC10SR20 Flat Lens Clear, 10º tilt, Slip Resistant CFBLU17 Trim Ring8 Color Filter Blue Rings & Masks CFGRN17 Color Filter Green PRR Protective Ring Round FLC20SR20 Flat Lens Clear, 20º tilt, Slip Resistant CFRED17 Color Filter Red PRS Protective Ring Square WWL Wall Wash Louver GM Grout Mask CLC Convex Lens, Clear GS LC Lexan Cover Convex Lens, Frosted RG9 Rock Guard CLF MVOLT 34B Lens (cont.) FLCSR20 HPS ­ External8 BL Lamp Included GN Green Ballasting12 GR Gray GEB Electronic Ballast SND Sand 0-10 Dimming STG Steel Gray TVG Terra Verde Green WH White __Z19 Zinc Undercoat (i.e. BLZ) LDIM16 Glare Shield Suitable For Wet Locations Notes: 1 150W metal halide only available with MVOLT and GEB (electronic). 2 Incandescent models available with 120 Volt only. 3 Fluorescent models available with 347 or MVolt (120-277) only. 4 NSP only available with T4 or T6 lamps. 5 Not available with T6 lamps or E17 lamps. 6 PAR 38 lamps only available with SP or FL distributions. 7 ISS not available with WWD distribution, fluorescent or P38 lamp type. 8 These accessories are not available with the SS door. 9 RG are not available with CLC or CLF lenses 10 SF is only available with 120, 277 or 347 volts on HID only. 11 DF is only available with 208, 220 or 240 volts on HID only. 12 Electronic ballasts are only available with MH lamps to 150 Watt and MVOLT voltage, no thermal protector on lamp modules. 13 Finishes are only available on the Aluminum doors. 14 FLC5 lens recommended with WWD distribution. 15 Only available in 120 or 277 Volt. 16 LDIM available with 26TRT, 32TRT, & 42TRT lamps, 0-10 Volt dimming. 17 Not available with FLC10. 18 P38100I is now P3883I, 100 watt lamps are discontinued due to energy regulations. 19 Add Zinc undercoat for harsh environments. 20 Meets ADA requirements for coefficient of friction. NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension on this sheet is to be assumed as a reference dimension: “Used for information purposes only. It does not govern manufacturing or inspection requirements.” (ANSI Y14.5-1973) 9144 Deering Avenue | Chatsworth, CA 91311 | www.hydrel.com Phone: 866.533.9901 | Fax: 866.533.5291 ©2014 Acuity Brands Lighting, Inc. 8/21/14 M9710_M9730 Example: M9710 B 70CMT6 23050HZ MFL FLC 16B IHL LP IEC Ordering information (50HZ) M9710 B 70CMT6 23050HZ MFL FLC Model Door Material Lamp Type Voltage Distribution 4 Lens 22050HZ NSP2 Narrow Spot FLC Flat Lens Clear FLCSR13 SP Spot Flat Lens Clear Slip Resistant NFL Narrow Flood FLC5 FLC5SR13 MFL Medium Flood Flat Lens Clear, 5º Axial Spread FL 3 Flood Flat Lens Clear, 5º Axial Spread, Slip Resistant FLC10 Flat Lens Clear, 10º tilt FLC10SR13 Flat Lens Clear, 10º tilt, Slip Resistant M9710 Round A Aluminum INCANDESCENT MH M9730 Square B Bronze P3883I11 PAR38, E27 35CMT6 SS Stainless Steel P38150I PAR38, E27 100Q Tubular, B15d 150Q Tubular, B15d 250Q Tubular, B15d T6, G-12 23050HZ 70CMT6 T6, G-12 24050HZ 150CMT61 T6, G-12 70M Ellip., E27 70CM Ellip., E27 FLUORESCENT 100M Ellip., E27 18TRT Triple Tube, GX24q2 100CM Ellip., E27 26TRT Triple Tube, GX24q3 150M1 Ellip., E27 32TRT Triple Tube, GX24q3 150CM1 Ellip., E27 FLC20 Flat Lens Clear, 20º tilt FLC20SR13 42TRT Triple Tube, GX24q3 HPS Flat Lens Clear, 20º tilt, Slip Resistant Ellip., E27 FLF Flat Lens Frosted CLC Convex Lens, Clear FLCAS Flat Lens Clear, AntiSlip CLF Convex Lens, Frosted 70S WFL Wide Flood WWD 9 Wall Wash Distribution FLC5AS Flat Lens Clear, 5º Axial Spread, AntiSlip 16B IHL Conduit Entries Accessories 16B PG16 Bottom Internal IHL10 Honeycomb Louver BTR Brass Round PG16 Side ISS5 Source Shield BTS M20 Bottom LSF10 Linear Spread Filter STR CFAMB10 Color Filter Amber STS CFBLU10 16S 20B 20S M20 Side LP IEC Listing Options Lamp Finish 8 PC2112 Potting Compound LP BL Black BZ Bronze Brass Square DDB Dark Bronze Stainless Round DNA Natural Alum. Stainless Square GN Green Rings & Masks GR Gray CFGRN10 Color Filter Green PRR Protective Ring Round SND Sand CFRED10 Color Filter Red PRS Protective Ring Square STG Steel Gray WWL GM Grout Mask TVG Terra Verde Green WH White __Z12 Zinc Undercoat (i.e. BLZ) Trim Ring 6 Color Filter Blue Wall Wash Louver Lamp Included External6 GS Glare Shield LC Lexan Cover RG7 Rock Guard IEC International Electrotechnical Commission Suitable For Wet Locations Notes: 1 150W metal halide only available with MVOLT and GEB (electronic). 2 NSP only available with T4 or T6 lamps. 3 Not available with T6 lamps. 4 PAR 38 lamps only available with SP or FL distributions. 5 ISS not available with WWD distribution, fluorescent or or P38 lamp type. 6 These accessories are not available with the SS door. 7 8 9 10 11 12 13 RG not available with CLC or CLF lenses Finishes are only available on the Aluminum doors. FLC5 lens recommended with WWD distribution. Not available with FLC10. P38100I is now P3883I, 100 watt lamps are discontinued due to energy regulations. Add Zinc undercoat for harsh environments. Meets ADA requirements for coefficient of friction. Features & specifications DOOR MATERIAL: Cast Aluminum, cast bronze, cast aluminum or bronze with stainless perforated trim insert or Stainless Steel. Available in round or square door trim. ROUGH-IN SECTION: Injection molded polymer with integral junction box for thru- branch wiring. The housing is U.V. stabilized, impact and corrosion resistant for use in all types of environments. The rough-in section has a cylinder/vault configuration and houses the lamp and power module components and top door finishing section. LAMP MODULE: Stainless steel housing, factory-sealed and purged of all moisture for longer component life. Lens is sealed with silicone gasket and stainless steel clamp band assembly with single fastener. Electrical connection to lamp module is done through a submersible quick pull plug connector with gold-plated contacts. Standard unit is thermally protected. LAMP INCLUDED. LAMP TYPE: Incandescent: PAR38 or T4 quartz halogen, 250W max. Fluorescent: Compact fluorescent, 42 Watt max. HID: T6 or E17, 150 Watt max.If a specific lamp is desired, specify manufacturer’s lamp number. Most lamps can be supplied. LAMP INCLUDED. FINISHING SECTION: Single lens design includes door assembly with 360° Aim-LockTM lamp module support ring. Module indexing provides easy maintenance and relamping without re-aiming. Active optical lenses are also available. Door trim locks into position with two stainless steel captive, tamper-resistant fasteners. POWER MODULE: Ballast is encapsulated in a custom designed heatdissipating epoxy resin that also eliminates all moisture intrusion to the ballast. Module is provided with submersible rated cord leads for connection to integral junction box and lamp module. Standard ballast is high power factor; fluorescent electronic or HID magnetic. CONDUIT ENTRIES: Two (2) bottom or side entries available. Box suitable for throughbranch wiring. Splicing volume is 25 in3 (410 ccm) ACCESSORIES: See Ordering Guide. FINISH: Finish is natural aluminum or bronze. Stainless steel door is brushed finish. Aluminum doors may be painted. See ordering guide. LISTING: U.L., C.E. VOLTAGE: See ordering guide. DISTRIBUTIONS: See ordering guide. M9700 Series Assembly consists of the following individual components parts MRIS97 Rough-In Housing MFS97 Finishing Section MACL Lamp Module MHSL97 Power Module 9144 Deering Avenue | Chatsworth, CA 91311 | www.hydrel.com Phone: 866.533.9901 | Fax: 866.533.5291 ©2014 Acuity Brands Lighting, Inc. 8/21/14 M9710_M9730
