HUBBELL
HEAVY DUTY 30A AC
MANUAL MOTOR CONTROLLERS
“Suitable as Motor Disconnects”
Hubbell Wiring Device - Kellems offers the most extensive line of 30A, 40A and 60A motor
controllers in the industry. New double pole and three pole 30A switches exceed required
performance criteria for revised UL 508 Industrial Control Equipment and CSA - C22.2 No.14-95
Industrial Control Equipment standards.
FEATURES
BENEFITS
Switches are listed as Manual Motor
Controllers "Suitable as Motor Disconnects"
Meets UL & CSA requirements for motor
disconnect.
NEMA 3R enclosure features an all aluminum
design
Rain tight for reliable outdoor use (IP44
Suitability)
Enclosures feature lockable handles
Meet OSHA Lockout / Tagout regulations
NEMA 3R enclosures feature "one way
mounting".
An added Hubbell safety feature that ensures
the switch is mounted in the enclosure
correctly.
Wiring Device-Kellems
ORDERING INFORMATION
30A Double Pole
HBL13R92MD
HBL7832FWMD
HBL7832FWMD in HBL13R90MD Type 3R enclosure
30A Side wired, Double pole, Single throw, AC Manual Motor Controller
30A Three Pole
HBL13R89MD
HBL7810FWMD
HBL7810FWMD in HBL13R90MD Type 3R enclosure
30A Side wired, Three pole, Single throw, AC Manual Motor Controller
3.38"
(85.9)
.40"
(10.2)
.09"
(2.3)
#10
-32
TAP
3.28"
(83.3)
2.38"
3.78"
(96.0) (60.5)
.19"
(4.8)
2.82"
(71.6)
2.31"
(58.7)
.20" DIA
(5.1)
1.5"
(38.1)
Mounting
Surface
2.75"
(69.9)
2.37"
(60.2)
4 Knockouts
.50'' (12.7) Type
Noted ''B''
1.75"
(44.5)
SPECIFICATIONS
6.5"
(165.1)
2.04"
(51.8)
4.40"
(111.8)
3 Mounting
Feet with
.25" (6.4)
Dia. Hole
B
1.25"
(31.8)
B
2.00"
(50.8)
2.00"
(50.8)
3.00"
(76.2) 3.31"
(84.1)
1.06"
(26.9)
Mounting
Surface
HBL3W100/ HBL4W100/ HBL5W100/ HBL6W100/ HBL7W100/ HBL8W100/ HBL9W100/ HBL10W100/
Listings & Certifications
UL 508 Industrial Control Equipment
CSA-C22.2 No. 14 Industrial Control Equipment
30A Suitable as Motor Disconnect
UL File E70402
CSA File LR-46186
Contact Blades
Terminal Screws
Component
Base & Cover
Yoke
Toggle
Brush Lifter
Contacts
Brass
Brass
PERFORMANCE DATA
Material
Thermoset Material
Zinc Plated Steel
Nylon
Polycarbonate
Silver Cadmium Oxide
HBL3W100/ HBL4W100/ HBL5W100/ HBL6W100/ HBL7W100/ HBL8W100/ HBL9W100/ HBL10W100/
Electrical & Mechanical
Product
Dielectric strength
2200V for 1 minute
Electrical Life (Minimum)
6000 cycles at rated
switch parameters
Working Voltage (Maximum)
600V RMS
Short Circuit Withstand Rating
(Motor Disconnect)
5,000 and 10,000 RMS with
RK5 fuses at rated switch value
Operating Temperature
+60 deg.C / -40 deg.C
Mechanical Life (Minimum)
10,000 cycles
Terminal Torque (Minimum)
20 inch pounds
Mechanical Life (Minimum)
10,000 cycles
Terminal Torque (Minimum)
20 inch pounds
Motor Rating (Horsepower)
120V AC
240V AC
480V AC
600V AC
Phase
30A Double Pole
2HP
5HP
10HP
15HP
Single
30A Three Pole
3HP
71/2HP
15HP
20HP
Three
Wiring Device-Kellems
Hubbell Canada Inc.
870 Brock Road South, Pickering, ON L1W 1Z8 • (905) 839-1138 • Fax: (905) 839-9108
www.hubbellonline.com
Worldwide Locations
TECHNICAL SERVICES: 1-877-233-8324
Hubbell Incorporated (Delaware) (203) 882-4800, Fax (800) 255-1031
Hubbell Ltd. England (441) 234-855444, Fax (441) 234-854008
Hubbell-Taian Co., Ltd., (886) 2 567-5995, Fax (886) 2 567-4853
Hubbell de Mexico, S.A. de C.V. (52) 5 575-2022, Fax (52) 5 559-8626
Caribe Sales Agencies, Puerto Rico (809) 720-7185, Fax (809) 789-2796
Printed In Canada. Specifications subject to change without notice. ® Registered trademark of Hubbell Incorporated
H1911