TMP No.
08279442
Page
1 of 1
Rev.
03/09
Always consult DORMA's web site for latest template at www.dorma-usa.com or call 1-800-523-8483.
ANGLE
OF DOOR
OPENING
DEADSTOP
FOR 1/4-20 MACHINE SCREWS USE 7/32" DRILL & TAP
FOR No.14 WOOD SCREWS USE 5/32" DRILL
DPK FASTENERS DRILL 1/8" PILOT HOLE
FOUR (4) HOLES IN SOFFIT FOR BRACKET
3 1/4"
"B"
[83]
*1 29/32"
[48]
5/8"
[16]
85°
90°
2"
[51]
100°
110°
1/2"
[13]
1 5/8"
[41]
*IMPORTANT: CHOOSE APPROPRIATE HOLE LOCATION
FOR SPACER BLOCK, IN ACCORDANCE WITH FRAME WIDTH.
ONE (1) HOLE IN FRAME FOR SPACER BLOCK.
"C"
1 1/2"
[38]
1 1/2"
[38]
FOR OPTIONAL NFHD BRACKET ONLY
TWO (2) HOLES IN FRAME
FACE OF STOP OR BSHD
"A"
CL OF HINGE OR PIVOT
CLOSER
6-7/8
(175)
6-1/8
(156)
4-7/8
(124)
3-3/4
(95)
OPTIONAL NFHD BRACKET
(STANDARD WITH S-DS, S-DST)
2-1/2"
[63]
10 1/4"
[260]
3/4"
[19]
FOR 1/4-20 MACHINE SCREWS USE 7/32" DRILL & TAP
FOR No.14 WOOD SCREWS USE 5/32" DRILL
DPK FASTENERS DRILL 1/8" PILOT HOLE
FOR SEX NUTS USE 3/8" DRILL
FOUR (4) HOLES IN DOOR FOR CLOSER
DOOR CLOSER MODELS: 7414, 7436 DS, DST, DSK, S-DS, S-DST
DOOR SAVER PARALLEL ARM INSTALLATION (PUSH SIDE MOUNT)
WITH STANDARD SPACER BLOCK
OPTIONAL NFHD BRACKET AND BSHD BLADE STOP SPACER BLOCK
DIM. "B"
SOFFIT
PLATE
11
(279)
10-1/4
(260)
9
(229)
7-7/8
(200)
DIM. "C"
(NFHD)
BRACKET
OPTIONAL
11-7/8
(302)
11-1/8
(283)
9-7/8
(251)
8-3/4
(222)
NOTES:
1. DO NOT SCALE DRAWING.
2. DIMENSIONS ARE IN INCHES/(MM).
3. LEFT HAND DOOR SHOWN.
4. CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT OF
COMPONENTS TO UNREINFORCED DOORS AND TO WOOD
OR PLASTIC FACED COMPOSITE TYPE FIRE DOORS, UNLESS
AN ALTERNATIVE METHOD IS IDENTIFIED IN THE INDIVIDUAL
DOOR MANUFACTURER'S LISTINGS.
5. FOR FRAME WIDTHS 4-1/2" AND LESS
USE OPTIONAL (NFHD) BRACKET.
6. MINIMUM DOOR WIDTH 26".
7. TEMPLATE BASED ON 4-1/2" x 4-1/2" BUTT HINGES.
8. HOLD OPEN APPROX. 2 DEG LESS THAN DEAD STOP.
9. OPTIONAL DPK FASTENERS (DPK86) FOR STEEL DOOR & FRAME ONLY.
7/16"
[11]
*2 23/32"
[69]
DIM. "A"
DORMA Door Controls
Reamstown, PA 17567
STANDARD
SPACER BLOCK
TMP No.
08279443
1 of 1
Page
03/09
Rev.
Always consult DORMA's web site for latest template at www.dorma-usa.com or call 1-800-523-8483.
ANGLE
DIM. "A"
OF DOOR
OPENING PLATE
DEADSTOP
9-5/8
85°
(244)
8-7/8
90°
(225)
7-5/8
100°
(200)
6-1/2
110°
(165)
FOR 1/4-20 MACHINE SCREWS USE 7/32" DRILL & TAP
FOR No.14 WOOD SCREWS USE 5/32" DRILL
DPK FASTENERS DRILL 1/8" PILOT HOLE
FOUR (4) HOLES IN SOFFIT FOR BRACKET
3 1/4"
[83]
"B"
*1 29/32"
[48]
5/8"
[16]
2"
[51]
5/8"
[16]
7/16"
[11]
1 5/8"
[41]
*2 23/32"
[69]
*IMPORTANT: CHOOSE APPROPRIATE HOLE LOCATION
FOR SPACER BLOCK, IN ACCORDANCE WITH FRAME WIDTH.
ONE (1) HOLE IN FRAME FOR SPACER BLOCK.
1 1/2"
[38]
"C"
1 1/2"
[38]
FOR OPTIONAL NFHD BRACKET ONLY
TWO (2) HOLES IN FRAME
DIM. "B"
SOFFIT
PLATE
11
(279)
10-1/4
(260)
9
(229)
7-7/8
(200)
NOTES:
1. DO NOT SCALE DRAWING.
2. DIMENSIONS ARE IN INCHES/(MM).
3. LEFT HAND DOOR SHOWN.
4. CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT OF
COMPONENTS TO UNREINFORCED DOORS AND TO WOOD
OR PLASTIC FACED COMPOSITE TYPE FIRE DOORS, UNLESS
AN ALTERNATIVE METHOD IS IDENTIFIED IN THE INDIVIDUAL
DOOR MANUFACTURER'S LISTINGS.
5. FOR FRAME WIDTHS 4-1/2" AND LESS
USE OPTIONAL (NFHD) BRACKET.
6. MINIMUM DOOR WIDTH 26".
7. TEMPLATE BASED ON 4-1/2" x 4-1/2" BUTT HINGES.
8. HOLD OPEN APPROX. 2 DEG LESS THAN DEAD STOP.
9. OPTIONAL DPK FASTENERS (DPK86) FOR STEEL DOOR & FRAME ONLY.
OPTIONAL NFHD BRACKET
(STANDARD WITH S-DS, S-DST)
STANDARD
SPACER BLOCK
1-1/4"
[32]
1 1/2"
[38]
"A"
4"
[102]
7"
[178]
CL OF HINGE OR PIVOT
DOOR CLOSER MODELS: 7414, 7436 DS, DST, DSK, S-DS, S-DST
DOOR SAVER PARALLEL ARM INSTALLATION (PUSH SIDE MOUNT)
WITH PLATES DP74, DP86, DP86FC AND STANDARD SPACER BLOCK
OPTIONAL NFHD BRACKET AND BSHD BLADE STOP SPACER BLOCK
DIM. "C"
(NFHD)
BRACKET
OPTIONAL
11-7/8
(302)
11-1/8
(283)
9-7/8
(251)
8-3/4
(222)
1/2"
[13]
FACE OF STOP OR BSHD
FOR 1/4-20 MACHINE SCREWS USE 7/32" DRILL & TAP
FOR No.14 WOOD SCREWS USE 5/32" DRILL
DPK FASTENERS DRILL 1/8" PILOT HOLE
FOR SEX NUTS USE 3/8" DRILL
FOUR (4) HOLES IN DOOR FOR PLATE
WITH DROP PLATE
DORMA Door Controls
Reamstown, PA 17567