Ultra-Low Phase Jitter HCSL SMD Clock Oscillator
ASVMX-100.000MHz-5ABD
Pb
ESD Sensitive
RoHS/RoHS II compliant
Moisture Sensitivity Level – MSL 3
APPLICATIONS:
• PCI-Express
• Storage
FEATURES:
• 100MHz HCSL
• Typical phase noise: 100fs (Integration range: 1.875MHz-20MHz)
• ±50ppm total frequency stability over -40°C to +85°C temperature range
• Industry standard 6-Pin 7 x 5mm LGA package
7.0 x 5.0 x 1.4mm
High Performance
KEY ELECTRICAL SPECIFICATIONS
Item
Supply Voltage
Storage Temp.
Lead Temp.(soldering, 10s)
ESD (HBM)
Minimum
-0.3
-55
Maximum
+3.6
+125
+260
2
Unit
V
°C
°C
kV
Condition
VDD = 2.5V±5% or 3.3V±10%, TA = -40°C to +85°C, outputs terminated with 50 Ohms to VSS.(1)
Parameters
Minimum
Frequency
Operating Temperature (TA)
Overall Frequency Stability (2)
Supply Voltage (VDD)
Supply Current (IDD)
Output Logic Level
1.
2.
Maximum
-40
-50
+2.375
VOH
VOL
Max Output Including Overshoot
(VOVS)
Min Output Including Undershoot
(VUDS)
Ringback Voltage (VRB)
Absolute Crossing Point (VOX)
Peak to Peak Output Voltage Swing
(Vswing)
Start-up Time
Rise Time (Tr)
Fall Time (Tf)
Duty Cycle
Integration Range:
12kHz to 20MHz
Phase Noise
Integration Range:
1.875MHz to 20MHz
Notes:
Typical
100.000
640
-150
27
Units
MHz
°C
ppm
V
mA
mV
mV
VOH+0.3
V
+85
+50
+3.63
95
700
850
0
VOL-0.3
Notes
V
0.2
250
450
550
V
mV
640
700
950
mV
20
450
450
55
ms
150
150
45
ps
%
220
fsRMS
100
Guaranteed after thermal equilibrium
Inclusive of initial accuracy, temperature drift, aging, shock, vibration from -40°C to +85°C.
PART IDENTIFICATION
ASVMX-100.000MHz -5ABD Packing
Blank: Bulk or Tube
T: Tape & Reel (1k/reel)
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Ultra-Low Phase Jitter HCSL SMD Clock Oscillator
ASVMX-100.000MHz-5ABD
DESCRIPTION:
OUTLINE DIMENSION
Ref.
A
A1
A2
D
D1
E
E1
b
c
e
f
k
m
n
Min.
1.260
0.190
1.070
4.900
6.900
1.050
1.350
0.050
0.210
1.090
Nom.
1.330
0.230
1.100
5.000
3.700 BSC
7.000
5.080 BSC
1.100
1.400
2.540 BSC
0.100
0.260
1.140
36
Pb
Max.
1.400
0.270
1.130
5.100
RoHS/RoHS II compliant
ASVMP
7.0 x 5.0 x 1.4mm
Low Jitter
High Performance
Recommended Land Pattern
Dimensional
Tolerance
aaa
0.100
bbb
0.070
7.100
1.150
1.450
0.150
0.310
1.190
Dimensions: mm
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Ultra-Low Phase Jitter HCSL SMD Clock Oscillator
ASVMX-100.000MHz-5ABD
PIN CONFIGURATION
Pb
RoHS/RoHS II compliant
DESCRIPTION:
Pin #
Pin Name
Pin Type
Pin Level
1
OE
I, SE
LVCMOS
2
3
4
5
6
DNC
GND
Q
/Q
VDD
PWR
O
O
PWR
HCSL
HCSL
ASVMP
7.0 x 5.0 x 1.4mm
Low Jitter
High Performance
Pin Function
Output Enable, disables output to tri-state.
0 = Disabled, 1= Enabled, 50k Ω Pull-up
Make no connection, leave floating
Power Supply Ground
Clock Output
Complimentary Clock Output
Power Supply
REFLOW PROFILE
Parameters
Average Ramp-up Rate
Pre-Heat Temp 150 – 200°C
Temp > 217°C
Time @ Peak Temperature
Peak Temperature
Ramp-down Rate
Time 25°C to Peak Temp.
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
Specifications
3°C /second max.
60 – 180 second
60 – 150 second
20 – 40 second
260°C + 0°C / -5°C
-6°C / second max.
8 minutes max.
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
Ultra-Low Phase Jitter HCSL SMD Clock Oscillator
ASVMX-100.000MHz-5ABD
TAPE & REEL
Pb
RoHS/RoHS II compliant
DESCRIPTION:
ASVMP
7.0 x 5.0 x 1.4mm
Low Jitter
High Performance
T= Tape & Reel, 1000pcs/reel. Reel Size = 7-inch Reel
MSL-3 packaging applies to –T option.
Blank = Bulk or Tube (43pcs/tube)
MSL-3 packaging applies to MOQ=43 units (tube)
313.75 ~ 316.25
0.50±0.10
All sides
5.50±0.20
6.50 Ref.
1.80+0.20/-0.10
2.80 Ref.
Dimensions: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.29.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale