molded plastic smd microprocessor crystal

advertisement
MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
ABSM
RoHS/RoHS II Compliant
13.0 x 4.7 x 4.2 mm
Pb in high melting type solder exemption 7(a) per RoHS II 2011/65/EU Annex
FEATURES:
• Plastic molded SMD
• Suitable for RoHS compliant reflow
APPLICATIONS:
• Computers, Modems, Microprocessors
• Communication, Test equipment
• PCMCIA
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Minimum
Maximum
3.579
50.000
Fundamental, AT-cut
-10
+60
-40
+85
-50
+50
-100
+100
180
150
120
100
80
60
50
40
7.0
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
ºC
ºC
ppm
See options
ppm
See options
Ω
3.579 ~ 3.999MHz
4.000 ~ 4.999MHz
5.000 ~ 5.999MHz
6.000 ~ 6.999MHz
7.000 ~ 8.999MHz
9.000 ~ 12.999MHz
13.000 ~ 19.999MHz
20.000 ~ 50.000MHz
pF
Drive Level
-5
Insulation Resistance
Notes
pF
18.0
Aging
Units
MHz
100
µW
+5
ppm
500
See options
Standard (See options if
MΩ
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
OPTIONS & PART IDENTIFICATION:
ABSM -
MHz -
-
-
-
Frequency in MHz*
Please specify the
frequency in MHz.
e.g. 16.000MHz
Packaging
Blank: Bulk
T: 1000pcs/reel
Load Capacitance (pF)
Please specify CL (min
10pF) in pF or S for series
Custom ESR if other
than standard
R□
□: Specify a value in Ω
(e.g.: R40)
Freq. Stability
Blank: ± 100 ppm
Z*: ± 50 ppm
Operating Temp.
E: 0°C to +70°C
B: -20°C to +70°C
C: -30°C to +70°C
N: -30°C to +85°C
D: -40°C to +85°C
Freq. Tolerance
3: ± 25 ppm
4: ± 30 ppm
* Note:
For frequency range: 9.0 ~ 50.0MHz, Freq. Stability option “Z” is available with all Operating Temp. options;
For frequency range: 3.579 ~ 8.999MHz, Freq. Stability option “Z” is available only with Operating Temp. option “E” and “B”.
ABRACON IS
ISO9001:2008
CERTIFIED
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 11.22.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
ABSM
RoHS/RoHS II Compliant
13.0 x 4.7 x 4.2 mm
OPTIONS & PART IDENTIFICATION:
Recommended Land Pattern
Dimensions: mm
OPTIONS & PART IDENTIFICATION:
ABRACON IS
ISO9001:2008
CERTIFIED
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 11.22.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
ABSM
RoHS/RoHS II Compliant
13.0 x 4.7 x 4.2 mm
TAPE & REEL:
Packaging:
T=Tape and reel (1000pcs/reel)
Dimensions: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 11.22.13
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Download