GE Full-Voltage Manual Starters
CR101H, CR101Y Manual Motor Starters
Single-Phase
1 Horsepower Maximum at 115 or 230 Volts
% Horsepower Maximum at 277 Volts for 2-Pole Forms
25 to 60 Hertz
Single-Speed Open and NEMA Type 1 Forms
Catalog Number
Open®
No. of
Poles
For Flush
or Outlet
Box Mtg.
NEMA Type 1
List Price,
GO-10G3®
Surface
Mounting
List Price,
GO-10G3®
Surface Mounting
Wind. Light®
List Price,
GO-10G3®
Toggle-Operated
1
CR101Y®
CR101H®
2
Key-Operated
1
2
CR101YOOOK
CR101HOOOK
$33.00
39.00
45.00
51.00
CR101Y1®
CR101H1®
$39.0I0
45.0 0
CR101Y100K
CR101H100K
CR101Y11
CR101H11
51.00
57.0 0
$57.00
63.00
CR101Y110K
CR101H110K
69.00
75.00
Single-Speed NEMA Type 3/4/12 Forms
No. of
Poles
List Price,
GO-10G3®
Catalog Number
Lever-Operated — %-inch Hub on One End
1
CR101Y400H
2
$138.00
144.00
CR101H400H
Lever-Operated —3A-inch Hub on Both Ends
1
CR101Y400J
150.00
156.00
CR101H400J
2
Factory Modification: Indicating light, Type 4 forms, add $210.00, GO-10G3 to list price.
Two-Speed Surface and Flush-Mounted NEMA Type 1 Forms
Indicating
Lights
(230V
Max.)
No. of
Poles
1
1
None
Two®
None
Two®
2
2
Catalog Number
Surface
Mounting
List Price,
GO-10G3®
CR101Y600B
CR101Y610B
CR101H600B
CR101H610B
Gray
Flush-Plate
CR101Y600A
CR101Y610A
CR101H600A
CR101H610A
$172.00
255.00
187.00
270.00
List Price,
GO-10G3®
Stainless-Steel
Flush-Plate
List Price,
GO-10G3®
$165.00
247.00
180.00
262.00
CR101Y608A
CR101Y618A
CR101H608A
CR101H618A
$172.00
255.00
187.00
270.00
Combination Device, NEMA Type 1 For Surface Mounting
Catalog Number
List Price,
GO-10G3®
CR101H12 (CR101H + Hand-Auto Switch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CR101H13(TwoCR101H)........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$102.00
108.00
No. of
Poles
2
2
© Open starters include an unmounted nameplate.
® List prices do not include heater(s). Heaters can be selected from table at right and ordered as a separate item
at $6.00 each, GO-10H: One heater is required per starter (two for 2-speed forms and for combination starter,
CR101H13).
® Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
® Units are individually boxed and "Poly-Packed" 10 per carton as standard.
Maximum Horsepower Ratings—AC or DC
Continuous Carry—16 Amperes
AC Voltage
Starter
Catalog Number
No. of
Poles
CR101Y
Single
1
CR101H
Double
1
32
/4
/4
DC Voltage
115
230
277
115
1
1
-
1
1
1
Vt
1
230
1
/4
1
Overload Heater Units
ForCR101H,Y
All CR123H heaters are
packaged as single units.
Catalog Number
List Price Each,
GO-1 OH
CR123H(all)
$6.00
The table below gives a proper
size heater to trip the switch on
approximately 125 percent
motor current.
Listed values are for motors
with 1.15-1.25 service factor.
For motors with 1.0 service
factor continuously, multiply
full-load current of motor by
0.9 and use this value to
select heater. Contact nearest
GE Industrial Systems—
Electrical Distribution and
Control Representative for
recommendation for heaters to
be used with definite-purpose
motors. If motor full-load
Amperes falls between two
ratings, select heater for the
highest of those two.
For 1.35 service factor motors,
multiply full-load current of
motor by 1.15 and use this
value to select heater(s).
Maximum Motor
Full-Load Amperes
.48
.53
.58
.65
.71
.78
.86
.95
1.04
1.14
1.25
1.37
1.49
1.63
1.78
1.95
2.13
2.32
2.53
2.76
3.01
3.27
3.56
3.88
4.22
4.60
5.00
5.43
5.90
6.41
6.98
7.60
8.25
8.95
9.75
10.6
11.4
12.5
13.6
14.8
16.0
Prices and data subject to change without notice
1999 Issue
Heater
Catalog Number
CR123H055A
CR123H061A
CR123H067A
CR123H074A
CR123H082A
CR123H090A
CR123H099A
CR123H108A
CR123H120A
CR123H132A
CR123H144A
CR123H158A
CR123H172A
CR123H188A
CR123H205A
CR123H224A
CR123H245A
CR123H267A
CR123H291A
CR123H317A
CR123H346A
CR123H377A
CR123H410A
CR123H446A
CR123H486A
CR123H529A
CR123H575A
CR123H625A
CR123H680A
CR123H739A
CR123H802A
CR123H873A
CR123H950A
CR123H103B
CR123H112B
CR123H122B
CR123H132B
CR123H144B
CR123H157B
CR123H171B
CR123H186B
7-3
GE Full-Voltage Manual Starters
CH101H, CHW1Y Manual Motor Starters
Single-Phase
1 Horsepower Maximum at 115 or 230 Volts
3
/4 Horsepower Maximum at 277 Volts for 2-Pole Forms
25 to 60 Hertz
Open
Starter
Manual Starter in
NEMA Type 1 GeneralPurpose Enclosure
Manual Starter With
Indicating Light
NEMA Type 4
Water- and Dust-Tight
Manual Starter
Two-Speed Surface-Mounted
Manual Starter
HAND
Combination
General-Purpose
Manual Starter
Application
Ordering Directions
Designed for starting and stopping single-phase fractional
horsepower motors. These manual starters have provision for
overload protection and their low cost provides economical starter
selection for applications where no undervoltage protection is
required. This line of starters may be used on such equipment as
grinders, conveyors, fans, mixers, and blowers.
Order starter by complete Catalog Number and specify overload
heater as a separate item by complete Catalog Number.
Features
• Terminal design—box terminals provide easy access for
wiring.
• Molded plastic switch housing—protects starter mechanism.
• Small size—open starter fits GEM or handy box.
Heater Selection
Tables........
7-2
I
. page 7-3
Examples:
1. A general-purpose enclosed starter for surface wall mounting is
desired. The starter is to break both lines. Motor to be started
with this device has a full-load current of 0.6 Ampere.
Order
1 CR101H1 manual motor starter at $45.00 each, GO-10G3.
1 CR123H074A heater at $6.00 each, GO-10G3.
2. The complete combination surface-mounted station,
CR101H12, may also be ordered by components, e.g. order
1—CR101X10 flush plate, at $71.00 each, GO-10G3; 1—
CR101X14 box at $6.00 each, GO-10G3; and 1—CR101H
manual starter at $39.00 each, GO-10G3. The other
complete general-purpose manual starters may be broken
down in this manner.
1999 Issue
Prices and data subject to change without notice