ADA4937-2 Evaluation Board
Part No. ADA4937-2YCP-EBZ
These evaluation boards are designed to help users evaluate the ADA4937-2. The evaluation board is a BARE BOARD. There are
no components or amplifiers soldered to the board. These parts must be obtained separately from the table below or on the
product page. Free samples may also be requested. The unpopulated board enables users to quickly customize and prototype a
variety of op amp circuits, which minimizes risk and reduces time to market.
The User Guide contains all the required documentation to build the board, including schematics, assembly drawing, and Bill of
Materials.
Evaluation Board User Guide
UG-018
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for Dual High Speed Differential Amplifiers
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
Two independent circuits enhance flexibility
GENERAL DESCRIPTION
The EB-D24CP44-2Z is designed, to aid in the evaluation of
dual high speed differential amplifiers. The EB-D24CP44-2Z
is a bare board (that is, there are no components soldered to
the board) that enables users to quickly prototype a variety of
differential amplifier circuits, which minimizes risk and
reduces time to market. The EB-D24CP44-2Z evaluation
board supports any of Analog Devices, Inc., dual high speed
differential amplifiers in 4 mm × 4 mm lead frame chip scale
packages (LFCSP).
Figure 1 shows the component side and circuit side of the
evaluation board. Figure 2 shows the evaluation board
schematic.
The 4-layer evaluation board accepts edge-mounted SMA connectors on both inputs and outputs, which allows efficient and
quick connection to test equipment or other circuitry.
The board ground plane, component placement, and power
supply bypassing have been optimized for maximum circuit
flexibility and performance. The evaluation board uses a variety
of SMT component case sizes: 0402, 0508, 0805, and 7343.
Figure 3 and Figure 5 show the evaluation board assembly
drawings. The metal layout pattern for connecting the board to
the op amp and to the supporting circuitry is shown in Figure 4
and Figure 6.
08142-006
DIGITAL PICTURE OF THE EVALUATION BOARD
COMPONENT SIDE
CIRCUIT SIDE
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART NUMBER LABELING ON YOUR BOARD MAY BE DIFFERENT FROM WHAT IS SHOWN HERE.
Figure 1. Component and Circuit Side of PCB
See the last page for an important warning and disclaimers.
Rev. A | Page 1 of 1
UG-018
Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1 Evaluation Board Schematic ............................................................3 General Description ......................................................................... 1 Assembly Drawing and Board Layout ............................................4 Digital Picture of the Evaluation Board ......................................... 1 ESD Caution...................................................................................4 Revision History ............................................................................... 2 REVISION HISTORY
2/10—Rev. 0 to Rev. A
Changes to General Description and Figure 1 ............................. 1
7/09—Revision 0: Initial Version
Rev. A | Page 2 of 2
3
P2
Figure 2. Dual Differential Amplifier Universal Evaluation Board Schematic
GND2
SMA
AGND
SMA
SMA
AGND
–VS1
+VS1
SMA
GND4
–IN2
+IN2
–IN1
+IN1
R14*
GND3
0.1µF
C2
PD1
*USER-DEFINED VALUE
DNI = DO NOT INSTALL
AGND
GND1
AGND
10µF
+ C1
+VS1 (TP2)
2
P2
R13*
–IN2
AGND
+IN2
AGND
–IN1
+IN1
R6*
R5*
–VS1
R8*
R7*
+VS1
R4*
R3*
R2*
R1*
0Ω
R28
0Ω
R26
0Ω
R25
0Ω
R27
R10*
R9*
+VS1
+VS1
+FB1
–IN1
6
–VS2
+VS2
23
200
+
22
9
+VS2
(TP3)
10µF
+ C7
AGND
R12*
8
7
+IN2
5 –FB2
4
3
2
1
24
R11*
AGND
C4
10µF
–VS1
+VS2
1
21
10
Z1
0.1µF
C6
–OUT2
VOCM2
(TP6)
AGND
12
PD2
–VS2
–VS2
VOCM1
+OUT1
AGND
C10
19
0.1µF
11
R30
DNI
0.1µF
C9
20
AGND
–VS1
+VS2
P2
PD1/DIS1
VOCM2
–OUT1
–VS1 (TP5)
13
14
15
16
17
18
SMA
AGND
R29
C12
VOCM1
TP1
R19*
R18*
AGND
AGND
SMA
0.1µF
DNI
VOCM2
VOCM1
R17*
R16*
AGND
R24
DNI
+OUT2
AGND
R23
DNI
–OUT2
AGND
R22
DNI
+OT1
AGND
R21
DNI
–OUT1
SMA
SMA
SMA
SMA
SMA
+OUT2
–OUT2
PD2/DIS2
1
2
3
P3
P3
C13
1
AGND AGND
10µF +
C14
–VS2 (TP4)
3
2
P3
P1
0.1µF
+OUT1
–OUT1
P1
P1
PD2
R15*
R20*
–VS1
AGND
+VS1
–VS2
+VS2
08142-001
SMA
+IN1
–IN2
–FB1
+FB2
Rev. A | Page 3 of 3
+OUT2
PD1/DIS1
Evaluation Board User Guide
UG-018
EVALUATION BOARD SCHEMATIC
UG-018
Evaluation Board User Guide
08142-002
08142-003
ASSEMBLY DRAWING AND BOARD LAYOUT
Figure 5. Board Assembly Drawing, Circuit Side
08142-004
08142-005
Figure 3. Board Assembly Drawing, Component Side
Figure 6. Board Layout Pattern, Circuit Side
Figure 4. Board Layout Pattern, Component Side
ESD CAUTION
Evaluation boards are only intended for device evaluation and not for production purposes. Evaluation boards are supplied “as is” and without warranties of any kind, express,
implied, or statutory including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. No license is granted by implication or otherwise under
any patents or other intellectual property by application or use of evaluation boards. Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Analog Devices reserves the
right to change devices or specifications at any time without notice. Trademarks and registered trademarks are the property of their respective owners. Evaluation boards are not
authorized to be used in life support devices or systems.
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG08142-0-2/10(A)
Rev. A | Page 4 of 4