FEATURES CPS Series Thermoplastic EXIT Sign Catalogue Number: Application Comments: Type: The CPS series is a designer low profile, thermoplastic exit sign for commercial applications. Unit is ideally suited for commercial or institutional installations. The CPS is designed to provide a durable, attractive and maintenance free exit sign. Construction The CPS Series is a durable corrosion and flame resistant Applications thermoplastic. Removable back plate with removable chevrons, two face plates and all mounting hardware for Features universal mounting options. Damp location listed. An external test switch is standard on all emergency self Universal wall mounting pattern powered units. Installation White, corrosion‐resistant metal Universal end, ceiling or wall mounts. Internal Specifications AC only, AC/DC and emergency self powered. Standard 120/347VAC input. Emergency unit uses a sealed nickel‐ cadmium battery providing a minimum 30 minutes of emergency duration ORDERING GUIDE SERIES FACE # LETTER COLOUR CPS U (Universial) R (Red) HOUSING FINISH OPERATION OPTIONS W (White) Blank (AC) EN (Emergency) UDC (Univers a l DC, 6, 12, 24V) AT (Auto Test) DIMENSIONS MODEL CPS A B C 300mm 184mm 46mm 11 13/16" 7 1/4" 1 13/16" Hubbell Canada LP | 870 Brock Road South, Pickering, ON L1W 1Z8 | (905) 839‐1138 www.hubbellonline.com/lighting CPS Series Thermoplastic EXIT Sign SPECIFICATIONS Construction Specifications The CPS is a designer, low profile, thermoplastic exit sign for commercial applications. This unit is ideal for commercial or institutional installations. The CPS is designed to provide a durable, attractive and maintenance‐free exit sign. Removable back plate with removable chevrons, two face plates and all mounting hardware for universal mounting options. Damp location listed. An external test switch is standard on all emergency self powered units. High output LED technology, for long life and even illumination. 120/347VAC input, maintenance free, sealed nickel cadmium batteries. Electronic cut‐off circuit prevents over discharge. Mechanical Specifications The CPS is constructed from durable corrosion and flame resistant thermoplastic. Removable back plate with removable chevrons, two face plates and all mounting hardware for universal mounting options. Damp location listed. An external test switch is standard on all emergency self powered units. High output LED technology, for long life and even illumination. Emergency self‐powered units are designed to operate on battery power in the event of a power failure. Battery and charger are completely contained within the enclosure. The CPS emergency unit utilizes solid state transfer technology eliminating relay failure due to particle build up on the relay. Push test switch provided for determining operational status of exit on AC fail. Maintenance free ni‐cad battery providing a minimum emergency duration of 30 minutes with a 24 hour recharge time. Hubbell Canada LP | 870 Brock Road South, Pickering, ON L1W 1Z8 | (905) 839‐1138 www.hubbellonline.com/lighting