9 Metering systems - Analogue and digital ammeters,
voltmeters, current transformers
Introduction
9-2
Analogue panel mount meters
AC moving iron ammeters and voltmeters (90° instruments)
9-3
AC moving iron ammeters and voltmeters (240° instruments)
9-5
Maximum demand ammeters and hour run meters
9-6
Power factor, frequency and synchronising meters
9-7
Dimensions and weights
9-8
Shunts (50 mV)
9-8
DC moving iron ammeters and voltmeters (90° instruments)
9-9
DC moving iron ammeters and voltmeters (240° instruments)
9 - 11
DIN rail meters
Analogue
9 - 14
Digital
9 - 16
Accessories and dimensions
9 - 17
Digital panel mount meters
9 - 18
Energy meters and Power Management software
9-1
Overview
9 - 19
kWh Meter selection chart
9 - 20
kWh Energy meter overview
9 - 22
Multi-function and power quality analysers selection chart
9 - 24
Multi-function and power quality analysers overview
9 - 26
Energy meters - Accessories and modules
9 - 30
Branch feeder monitor
9 - 32
Energy Management software
9 - 33
Current transformers for cables
9 - 36
Current transformers - horizontal mount
9 - 37
Current transformers - vertical mount
9 - 38
Disconnect terminals
9 - 39
Split core - current transformers
9 - 40
Transducers
9 - 42
Combined current transformer and transducer
9 - 43
ANALOGUE METERS
KWH ENERGY METERS
MULT
TI-FUNCT
I-F
FUNCTION
METE
ERS
DIGITAL METERS
POWER QUA
ALITY
ANAL
LYSER
Satisfying all your energy management needs
NHP promises to satisfy all of your Energy Management requirements with one of our three tailored solution offerings NHPower Component, NHPower Vision and NHPower Control.
By bringing together components from the entire NHP product range, including our highly accurate meters,
metering software and accessories you can trust NHP to deliver a customised solution to suit your application.
For further
information on
NHP’s Energy
Management
solutions,
please scan
the QR code
NHPower: component
Our range of powerful, highly accurate, user friendly meters from IME,
Carlo Gavazzi and Rockwell Automation
monday, october
NHPower: vision
Our range of Carlo Gavazzi meters and
Carlo Gavazzi analytical and reporting software
9
NHPower:
NHPo
NH
Pow
wer: control
we
con
ontr
trol
ol
Our range of meters,
software
metter
ers,
s, analytical
ana
naly
lyti
tica
call and
and reporting
report
integrated with all manner of automation products
9-2
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Analogue meters
90º AC moving iron ammeters
General features
Accuracy class 1.5 (AS 60051)
600 V operational voltage rating
Insulation tested at 2 kV/min @ 50 Hz
Operating temperature -25 to +50 °C
Overload parameters:
Ammeters 1.2 x In cont., 10 x In for 5 sec.
Voltmeters 1.2 x Un cont., 2 x Un for 5 sec.
Suitable for mounting on ferromagnetic materials
Self-extinguishing housing
IP 52 rated front frame
Operates with ambient humidity rating 85 % without
condensation at max. 35 °C for 60 days
Vibration resistant with amplitude of 1-0.03 mm
peak frequency on 3 axes @ 5-80 Hz (IEC 68-2-6)
90º AC ammeter - Direct connect
Direct connect operated with 5x over-scale
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale / input from
table 2 .
1
RQ72E AAC 100A
2
Window size
48 mm x 48 mm
Cat. No.
RQ48EAAC_
Price $
92.00
72 mm x 72 mm
RQ72EAAC_
94.00
96 mm x 96 mm
RQ96EAAC_
98.00
1
1
Scale / input selection 1 A, 2.5 A, 5 A, 10 A,15 A, 20 A, 25 A, 30 A, 40 A, 50 A, 60 A, 80 A ), 100 A )
90º AC ammeter - Current Transformer (CT) connect
5A CT operation with 5x over-scale
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale from table 2 .
1 A input is available on request, contact NHP for further details.
1
Window size
48 mm x 48 mm
Cat. No.
RQ48EACT5A5X_
Price $
80.00
72 mm x 72 mm
RQ72EACT5A5X_
74.00
96 mm x 96 mm
RQ96EACT5A5X_
77.00
RQ72E ACT 5A 5X 750
2
Scale selection
5, 10, 12, 15, 20, 25, 30, 40, 50, 60, 75, 80, 100, 120, 150, 200, 250, 300, 400,
500, 600, 750, 800, 1K, 1k2, 1k5, 1k6, 2k, 2k5, 3k, 4k
9
Price Schedule
‘Y8’
Notes:
) Not available in 48 mm.
1
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9-3
Analogue meters
90º AC moving iron voltmeters
90º AC Voltmeter - Direct connect
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale / input from
table 2 .
1
2
Window size
48 mm x 48 mm
Cat. No.
RQ48EVAC_
Price $
77.00
72 mm x 72 mm
RQ72EVAC_
85.00
96 mm x 96 mm
RQ96EVAC_
94.00
Scale / input selection 50 V, 150 V, 300 V, 500 V
RQ72E VAC 500V
90º AC Voltmeter - Voltage Transformer (VT) Connect
High voltage measurement, VT operated
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 adding the input from table 2 , and
adding the VT primary voltage from table 3 .
1
RQ72E VVT
110V/1.1kV
Window size
48 mm x 48 mm
Cat. No.
RQ48EVVT_IME
136.00
72 mm x 72 mm
RQ72EVVT_IME
136.00
96 mm x 96 mm
RQ96EVVT_IME
136.00
Price $
2
Input selection
24 V, 110 V, 240 V, 415 V
3
VT Primary Voltage
1k
1k1
1k5
2k2
3k3
4k
6k6
Scale Range
1.5 kV
1.5 kV
2 kV
3 kV
4 kV
5 kV
10 kV
9
Price Schedule
‘Y8’
9-4
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Analogue meters
240º AC moving iron ammeters and voltmeters
240º AC Ammeter - Direct connect
Direct Connect operated with 5x over-scale
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale / input from
table 2 .
1
AQ96E AAC 10A
2
Window size
48 mm x 48 mm
Cat. No.
AQ48EAAC_
Price $
260.00
72 mm x 72 mm
AQ72EAAC_
265.00
96 mm x 96 mm
AQ96EAAC_
270.00
Scale/input selection 1 A, 2.5 A, 5 A, 10 A
240º AC Ammeter - CT connect 1)
5A CT operated with 5x over-scale
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale from table 2 .
1 A input is available on request, contact NHP for further details.
1
2
Window size
48 mm x 48 mm
Cat. No.
AQ48EACT5A5X_
Price $
240.00
72 mm x 72 mm
AQ72EACT5A5X_
265.00
96 mm x 96 mm
AQ96EACT5A5X_
265.00
Scale selection
AQ96E ACT 5A 5X 50A
10, 12, 15, 20, 25, 30, 40, 50, 60, 75, 80, 100, 120, 150, 200, 250, 300, 400, 500,
600, 750, 800, 1k, 1k6, 2k, 3k, 4k
240º AC Voltmeter - Direct connect
Ordering
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale / input from
table 2 .
1
2
Window size
48 mm x 48 mm
Cat. No.
AQ48EVAC_
Price $
230.00
72 mm x 72 mm
AQ72EVAC_
225.00
96 mm x 96 mm
AQ96EVAC_
230.00
Scale/input selection 50 V, 150 V, 300 V, 500 V
9
AQ96E VAC 500V
Price Schedule
‘Y8’
Notes:
1
) 1 A versions available upon request, please contact NHP.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9-5
Analogue meters
Maximum demand ammeters and hour run meters
Maximum demand ammeters
Nominal temperature range 0 - +40 ºC
15 minute delay time operation
Thermal movement
Knob resettable slave pointer
Rated burden: approx 1.5 VA
Accuracy class 1.5
5 A CT operation
1.2x overcurrent measurement
Red slave indicator, peak measurement
90º AC Maximum demand ammeter - CT connect, delay time 15 mins
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale/ input from
table 2 .
1 Window size
72 mm x 72 mm
Cat. No.
RQT72N5A_
Price $
151.00
96 mm x 96 mm
RQT96N5A_
153.00
2 Scale / input
selection
10, 12, 15, 20, 25, 30, 40, 50, 60, 75, 80, 100, 120, 150, 200, 250, 300, 400, 500,
600, 750, 800, 1k, 1k2, 1k5, 1k6, 2k, 2k5, 3k, 4k
RQT96N 5A 100A
Combined maximum demand ammeter - CT connect, delay time 15 mins
Instrument includes a dynamic ammeter pointer and scale
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale from table 2 .
1 Window size
72 mm x 72 mm
Cat. No.
RQTE72N5A_
Price $
225.00
96 mm x 96 mm
RQTE96N5A_
225.00
2 Scale / input
selection
10, 12, 15, 20, 25, 30, 40, 50, 60, 75, 80, 100, 120, 150, 200, 250, 300, 400, 500,
600, 750, 800, 1k, 1k2, 1k5, 1k6, 2k, 2k5, 3k, 4k
RQTE72N 5A 100A
Hour run meters
7 digit (2 decimal) with run indicator, non-resettable counter
Front frame with flange for 50 mm circular cut-out on RQ48 models
Faston, fork lug or 2 x 4 mm2 wire termination on RQ48 models
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the voltage range from
table 2 .
9
RQ48.0 240 V AC
Price Schedule
‘Y8’
9-6
24 V AC
50 Hz
110 V AC
50 Hz
240 V AC
50 Hz
415 V AC
50 Hz
10 - 80
V DC
Price $
85.50
Price $
70.00
Price $
71.50
Price $
94.00
Price $
94.00
1 Window size
48 mm x 48 mm
Range
Cat. No.
RQ480_
72 mm x 72 mm
RQ720_
140.00
136.00
136.00
152.00
181.00
96 mm x 96 mm
RQ960_
124.00
163.00
163.00
169.00
190.00
2 Voltage auxiliary range
Notes:
24 V AC, 110 V AC, 240 V AC, 415 V AC, 1080 V DC (10-80 V DC)
Standard 5 A input from CT for all maximum demand ammeters.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Analogue meters
Power factor, frequency and synchronising meters
AC Power factor meters
Accuracy class 1.5
Single phase 240 V AC models
3 phase 415 V AC
(balanced load) models
5 A CT operated
Scale Cos , inductive 0.5-1-0.5 capacitive
Meter and transducer supplied separately
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the input from table 2 .
1 Window size
72 mm x 72 mm
Cat. No.
RQ72PF_
Price $
880.00
96 mm x 96 mm
RQ96PF_
880.00
2 Input selection
RQC72 240VAC
240 V, 415 V
AC Frequency meter
Single phase 110 V AC and 240 V AC models
3 phase 415 V AC models
The transducer and moving operation coil meter
offers greater immunity to external vibration
Moving coil meter and transducer,
accuracy class 0.5
Voltage level tolerance +15 %, 4 VA burden
Range of 45-55 Hz
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the input from table 2 .
1 Window size
48 mm x 48 mm
Cat. No.
RQ48FI_
Price $
265.00
72 mm x 72 mm
RQ72FI_
245.00
96 mm x 96 mm
RQ96FI_
245.00
2 Input selection
RQ72FI 240VAC
110 V, 240 V, 415 V
AC Synchronising meter
LED Static synchroscope
Synchronism is achieved when the rectangular LED under the arrow is illuminated and the 2 phase LEDs
are off. The lighting of the LEDs clockwise or anti-clockwise means the generator to be synchronised is
lagging or leading.
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the input from table 2 .
RQ96SL
1 Window size
96 mm x 96 mm
2 Input selection
Cat. No.
RQ96SL_
Price $
620.00
110 V, 415 V
9
Price Schedule
‘Y8’
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9-7
Analogue meter dimensions
AQ/RQ Analogue meters
Meter dimensions
Meter cut-out dimensions
Overall dimensions (mm) and weight
Cat. No.
A
B
C
D
E
Weight (g)
RQ48
48 x 48
44.5 x 44.5
40
22
45
100
AQ48
48 x 48
44.5 x 44.5
57.5
22
45
200
RQ72
72 x 72
66.5 x 66.5
44
12
68
150
AQ72
72 x 72
66.5 x 66.5
59
12
68
300
RQ96
96 x 96
91 x 91
44
12
92
210
AQ96
96 x 96
91 x 91
59
12
92
400
DC Shunts
Shunts (50 mV)
NHP100-50 mV Shunt
Current
rating
Amps DC
Cat. No. ) Output
Current
rating
Price $ Amps DC
Cat. No. 1) Output
Price $
10 A
NHP 10-50MV
95.50
250 A
NHP 250-50MV
141.00
20 A
NHP 20-50MV
95.50
300 A
NHP 300-50MV
141.00
30 A
NHP 30-50MV
95.50
400 A
NHP 400-50MV
200.00
40 A
NHP 40-50MV
95.50
500 A
NHP 500-50MV
330.00
50 A
NHP 50-50MV
95.50
600 A
NHP 600-50MV
340.00
60 A
NHP 60-50MV
95.50
800 A
NHP 800-50MV
570.00
75 A
NHP 75-50MV
95.50
1000 A
NHP 1000-50MV
620.00
80 A
NHP 80-50MV
95.50
1200 A
NHP 1200-50MV
730.00
100 A
NHP 100-50MV
95.50
1500 A
NHP 1500-50MV
740.00
150 A
NHP 150-50MV
95.50
2000 A
NHP 2000-50MV
880.00
200 A
NHP 200-50MV
141.00
1
-
9
Price Schedule
‘Y8’
9-8
Notes:
1
) 75 mV shunts available on indent locally, P.O.A. Replace 50 mV in Cat. No. with 75 mV when
ordering shunt. Shunts available up to 12000 A.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Analogue meters
90º DC moving coil ammeters and voltmeters
DC ammeters
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the input from table 2 .
1 Window size (mm)
48 mm x 48 mm
72 mm x 72 mm
96 mm x 96 mm
2 Input selection
Cat. No.
Price $
139.00
135.00
144.00
RQ48MADC_
RQ72MADC_
RQ96MADC_
50 µA 1) 2), 100 µA 1) 2), 150 µA 1) 2), 200 µA 1) 2)
1 mA 2), 2 mA 2), 3 mA 2), 4 mA 2), 5 mA 2), 6 mA 2), 7 mA 2), 8 mA 2),
9 mA 2), 10 mA 2), 20 mA 2), 25 mA, 30 mA, 40 mA, 50 mA, 60 mA, 75 mA,
80 mA, 90 mA, 100 mA, 120 mA, 150 mA, 200 mA, 300 mA, 400 mA,
500 mA, 600 mA, 700 mA, 800 mA
RQ96 M ADC 25 A
1 A, 5 A, 10 A 3), 15 A 3), 20 A 3), 25 A 3), 30 A 3), 40 A 3), 60 A 3)
420 mA (4-20 mA mechanically suppressed) 2)
Shunt connect ammeters
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 11 and adding the scale from table 2 .
The input is 50 mV 4).
1 Window size (mm)
48 mm x 48 mm
72 mm x 72 mm
96 mm x 96 mm
2 Scale selection
Cat. No.
RQ48MADC50MV_
RQ72MADC50MV_
RQ96MADC50MV_
Price $
134.00
130.00
139.00
10, 20, 30, 40, 50, 60, 75, 80, 100, 150, 175, 200, 250, 300, 400, 500,
600, 800, 1k, 1k2, 1k5, 2k
Centralised zero
Example: 10 A...0...10 A = 10A10
1 Window size (mm)
Cat. No.
RQ48MADC_
RQ72MADC_
RQ96MADC_
48 mm x 48 mm
72 mm x 72 mm
96 mm x 96 mm
2 Scale selection
Price $
139.00
135.00
144.00
10A10, 20A20, 30A30, 40A40, 50A50, 60A60, 75A75, 80A80, 100A100,
150A150, 175A175, 200A200, 250A250, 300A300, 400A400, 500A500,
600A600, 800A800, 1kA1k
9
Notes:
Price Schedule
‘Y8’
)
)
3
)
4
)
1
2
Only available in window size 72 mm x 72 mm.
Scale range must be specified when ordering.
Only available in window size 72 mm x 72 mm and 96 mm x 96 mm.
75 mV is available on request, contact NHP for further details.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9-9
Analogue meters
90º DC moving coil ammeters and voltmeters
DC voltmeter
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the input from table 2 .
Cat. No.
Price $
1 Window size (mm)
48 mm x 48 mm
RQ48MVDC_
134.00
72 mm x 72 mm
RQ72MVDC_
130.00
96 mm x 96 mm
RQ96MVDC_
139.00
2 Input selection
10V, 12V, 15V, 25V, 30V, 40V, 300V, 500V, 600V
Centralised zero
Example: 10 V...0...10 V = 10V10
1
Window size (mm)
48 mm x 48 mm
72 mm x 72 mm
96 mm x 96 mm
2 Input selection
Cat. No.
RQ48MVDC_
RQ72MVDC_
RQ96MVDC_
Price $
139.00
135.00
144.00
10V10, 12V12, 15V15, 25V25, 30V30, 40V40, 300V300, 500V500, 600V600
9
Price Schedule
‘Y8’
9 - 10
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Analogue meters
240º DC moving coil ammeters and voltmeters
DC Ammeters
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the input from table 2 .
Cat. No.
Price $
1 Window size (mm)
48 mm x 48 mm
265.00
AQ48MADC_
72 mm x 72 mm
230.00
AQ72MADC_
96 mm x 96 mm
250.00
AQ96MADC_
2 Input selection
AQ96M-VDC 500V
1 mA 1), 2 mA 1), 3 mA 1), 4 mA 1), 5 mA 1), 6 mA 1), 7 mA 1), 8 mA 1),
10 mA 1), 20 mA 1), 25 mA, 30 mA, 40 mA, 50 mA, 60 mA, 75 mA, 80 mA,
90 mA, 100 mA, 120 mA, 150 mA, 200 mA, 300 mA, 400 mA, 500 mA,
600 mA, 700 mA, 800 mA
1 A, 5 A
420 mA 1) (4-20 mA mechanically suppressed)
Shunt connect ammeters
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the scale from table 2 .
The input is 50 mV 2).
1 Window size (mm)
48 mm x 48 mm
72 mm x 72 mm
96 mm x 96 mm
2 Scale selection
Cat. No.
AQ48MADC50MV_
AQ72MADC50MV_
AQ96MADC50MV_
Price $
265.00
230.00
250.00
20, 30, 40, 50, 60, 75, 80, 100, 150, 200, 250, 300, 400, 500, 600, 800,
1k, 1k2, 1k5, 2k
Centralised zero
Example: 10 A...0...10 A = 10A10
Cat. No.
1 Window size (mm)
48 mm x 48 mm
72 mm x 72 mm
96 mm x 96 mm
2 Scale selection
AQ48MADC_
AQ72MADC_
AQ96MADC_
Price $
265.00
230.00
250.00
10A10, 20A20, 30A30, 40A40, 50A50, 60A60, 75A75, 80A80, 100A100,
150A150, 200A200, 250A250, 300A300, 400A400, 500A500, 600A600,
800A800, 1kA1k
9
Price Schedule
‘Y8’
Notes:
1
2
) Scale range must be specified when ordering.
) 75 mV is available on request, contact NHP for further details.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 11
Analogue meters
240º DC moving coil ammeters and voltmeters
DC Voltmeters
Ordering instructions
Construct the Catalogue Number by selecting the meter from table 1 and adding the input from table 2 .
Cat. No.
Price $
1 Window size (mm)
48 mm x 48 mm
AQ48MVDC
265.00
72 mm x 72 mm
AQ72MVDC
230.00
96 mm x 96 mm
AQ96MVDC
250.00
2 Input selection
10 V, 12 V, 15 V, 25 V, 30 V, 40 V, 300 V, 500 V, 600 V
Centralised zero
Example: 10 V...0...10 V = 10V10
1 Window size (mm)
48 mm x 48 mm
AQ48MVDC
Price $
265.00
72 mm x 72 mm
AQ72MVDC
230.00
96 mm x 96 mm
AQ96MVDC
250.00
2 Input selection
Cat. No.
10V10, 12V12, 15V15, 25V25, 30V30, 40V40, 300V300, 500V500, 600V600
9
Price Schedule
‘Y8’
9 - 12
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
ARE YOU MONITORING YOUR
ENERGY CONSUMPTION?
Power and energy management solutions.
RENEWABLE ENERGY
ENERGY-CG-METERS
“Monitoring your energy consumption is the first step in
reducing your carbon footprint”.
If you cannot measure it, then how can you improve on
it? The key is a sub-metering system to help understand,
tune and track your sustainability initiatives, ultimately
improving efficiency.
1300 NHP NHP
nhp.com.au
0800 NHP NHP
nhp-nz.com
DIN rail meters
AC moving iron ammeters and voltmeters
Accuracy class 1.5
Working temperature -25 to +40 °C humidity 80 %
Overload parameters:
Ammeters: 1.2 In continuous, 10 In for 10 seconds
Voltmeters: 1.2 Un continuous, 2 Un for 5 seconds
Working voltage 600 V
Insulation tested 2 kV/1 min @ 50 Hz
Self-extinguishing housing
IP 50 front protection
DIN rail, base or panel mount with
optional flush mount kit
Construct the Cat. No. by adding the measurement range from the table.
DIN rail AC ammeters
Direct connect with 2x over-scale
Measurement range
D4E-AAC-20 A
D4E ACT 5A 2X100 A
1 A, 2.5 A, 5 A, 10 A, 15 A,
20 A, 25 A, 30 A, 40 A, 50 A, 60 A
Cat. No. 1)
D4E-AAC_
DIN rail AC ammeters - CT connect 2)
Price $
111.00
5 A CT operation with 2x over-scale
Cat. No. 1)
Measurement range
10, 12, 15, 20, 25, 30, 40, 50, 60, 75, 80, D4E-ACT 5A 2X_
100, 200, 250, 300, 400, 500, 600, 750,
800, 1k, 1k2, 1k5, 1k6, 2k, 2k5, 3k, 4k
111.00
DIN rail AC voltmeters - Direct connect
Cat. No. 1)
Price $
D4E-VAC_
121.00
Cat. No.
Price $
D4FI-240V
245.00
Measurement range
100 V, 150 V, 300 V, 500 V
DIN rail frequency meter 240 V AC
Measurement range
45 - 55 Hz
Price $
D4E VAC 300 V
9
Price Schedule
‘Y8’
9 - 14
Notes:
1
2
) Add required current or voltage measurement range to complete the Cat. No.
) 1 A input is also available on request, contact NHP for details.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
DIN rail meters
DC moving coil meters 1)
Construct the Cat. No. by adding the current or voltage measuring range from the table.
DC ammeters
Direct connect with 2x over-scale
Current measurement
1 A, 2.5 A, 5 A, 10 A, 15 A, 25 A, 40 A
ranges
1 mA 1), 2 mA 1), 3 mA 1), 4 mA 1),
Price $
D4M-ADC_
197.00
5 mA 1), 6 mA 1), 7 mA 1), 8 mA 1),
10 mA 1), 20 mA 1), 25 mA, 30 mA, 40 mA,
50 mA, 60 mA, 75 mA, 80 mA, 90 mA,
100 mA, 120 mA, 150 mA, 200 mA,
300 mA, 400 mA, 500 mA, 600 mA, 700 mA
D4M-ADC 10 A
D4M-VDC 300 V
Cat. No.
DC shunt connect ammeters
Cat. No.
Price $
Current measurement
ranges
D4M-ADC 50MV 2)
197.00
Cat. No.
Price $
10 A, 20 A, 30 A, 40 A, 50 A, 60 A, 75 A,
80 A, 100 A, 150 A, 175 A, 200 A, 250 A,
300 A, 400 A, 500 A, 600 A, 800 A, 1kA,
1k2A, 1k5 A, 2 kA
DC voltmeters
Voltage measuring
ranges
10 V, 12 V, 15 V, 25 V, 30 V, 40 V, 60 V,
D4M-VDC_ )
3
171.00
100 V, 150 V, 200 V, 250 V, 300 V, 400 V,
500 V, 600 V
9
Price Schedule
‘Y8’
Notes:
)
)
3
)
1
2
Signal input: scale range must be specified when ordering.
75 mV input available on request.
AC (Rectified) input available on request.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 15
DIN rail meters
DIN rail digital instruments
Digital indicator at 3 digits
Out of scale indication
Ammeters
AC ammeter Connection
AC ammeter
DGMA07A3
Display with green LED (14 mm)
Auxiliary
240 V AC
Cat. No.
DGMG07C2
Price $
1A
CT
Display range
Selectable 1)
5A
CT
Selectable 1)
240 V AC
DGMG07C1
365.00
10 A
Direct
9.99 A
240 V AC
DGMA07A3
350.00
20 A
Direct
20.0 A
240 V AC
DGMA07A4
350.00
50/100 mV
Shunt
240 V AC
DGMM07L5
395.00
50/100 mV
Shunt
Selectable 1)
Selectable 1)
20-150 V DC
DGMM0HL5
350.00
Auxiliary
240 V AC
Cat. No.
DGMG07C1
Price $
365.00
20-150 V DC
POA
DC ammeter
Voltmeters
AC voltmeter Connection
500 V
Direct
500 V
Direct
Display range
Selectable 1)
Selectable 1)
DGMG0HC1
POA
1000 V
VT
999 V
240 V AC
DGMD07D1
350.00
0-100/500 V
Direct
99.9/500 V
240 V AC
DGMN07N6
350.00
0-100/500 V
Direct
99.9/500 V
20-150 V DC
DGMN0HN6
350.00
Cat. No.
DGMS07F1
445.00
5 digit + 2 decimal 110 V AC
D20110V
141.00
5 digit + 2 decimal 240 V AC
D20240V
141.00
D4SE
310.00
DC voltmeter
AC voltmeter
DGMG07C1
Frequency meter
Range
10-100 Hz
Input
100-500 V
Connection
Direct
Auxiliary
240 V AC
Price $
Hour run meter – analogue accumulative hours and minutes
Frequency meter
DGMS07F1
Phase fail/rotation indicator 2)
100-440 V
9
Phase fail/rotation
indicator
D4SE
Price Schedule
‘Y8’
9 - 16
50-60 Hz
Notes:
1
2
)
)
Contact NHP for selectable display ranges.
400 Hz available on request.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
DIN rail meters
DIN rail accessories
Flush mounting kits for Din rail meters
FD8
Description
DIN flush mounting kit
Suits meter size
4 module
Cat. No.
FD4
Price $
121.00
DIN flush mounting kit
6 module
FD6
125.00
DIN flush mounting kit
8 module
FD8
141.00
Price $
IP 54 protection hinged window
L08
Description
Dimensions (mm)
Opening
Dimensions (mm)
External
Cat. No.
Window
78 x 50
93 x 76
L04
55.00
Window
146 x 50
162 x 76
L08
69.00
DIN rail meter dimensions (mm)
D4/DG Meter
(DIN 4 module)
D6 Meter
(DIN 6 module)
D8 Meter
(DIN 8 module)
9
Price Schedule
‘Y8’
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 17
Digital panel mount meters
General features
IP 50 front frame / IP 20 terminals and housing
Self-extinguishing housing
Operating temperature -5 ° to +55 °C
Vibration resistant with amplitude of 1-0.3 mm peak
frequency on 3 axes @ 5-80 Hz (IEC 68-2-6)
Easy faston (6.3 x 0.8 mm) terminal connections
High efficiency red LED display
Accuracy class +- 1 % + 1 digit
Insulation voltage rating 650 V
Auxiliary voltage 240 V AC- other voltages available
on request
Maximum display 999; except DG7C07A2 i.e., 9999
72 x 36 frame size 240 V AC Auxiliary
DG3SOAF2
Description
AC ammeter direct connect 0 – 10 A 1)
DG3A07A3
345.00
AC ammeter 1 A CT connected or 0 –500 V voltmeter 1) 2)
DG3G07C2
345.00
AC ammeter 5 A CT connected or 0 –500 V voltmeter 1) 2)
DG3G07C1
345.00
VT connected voltmeter 0 – 100 V
DG3D07D1
345.00
DC shunt connected ammeter 50 - 75 mV 4)
DG3M07L5
310.00
DC ammeter 0 – 1 mA ) ) )
DG3J07GB
350.00
DC ammeter 4 – 20 mA (max. display 999) 1) 3) 4)
DG3J07GL
350.00
DC Voltmeter 0 – 100 V or 0 – 500 V DC selectable )
DG3N07N6
345.00
Frequency 10 – 100 Hz (auxiliary supply 230 V AC) 1)
DG3S06F1
390.00
1
3
Cat. No.
4
1
Price $
72 x 72 frame size 240 V AC Auxiliary 1 or 2 displays
AC ammeter 5 A CT connected 4 digit 1) 2) 3)
DG8207C1
DG7C07A2
405.00
AC ammeter
5 A CT or 0 - 500 V AC voltmeter 3 digit 1) 2) 3)
DG7G07C1
350.00
AC ammeter
5 A CT connected + AC voltmeter 0 – 500 V 2)
DG8207C1
680.00
AC ammeter direct connect 0 –10 A 1)
DG7A07A3
350.00
AC voltmeter 0 – 100 V direct or VT Connect 1) 2)
DG7D07D1
POA
5 A CT connected or
DG7G27C1
690.00
DG9307C1
940.00
DG9307E5
1120.00
AC ammeter
AC voltmeter 0 – 500 V w/- 2 programmable alarms 1) 2) 3)
96 x 96 frame size 240 V AC Auxiliary 1) 3 displays
3 Displays of AC ammeter 5 A CT connected or
0- 500 V AC voltmeters or any combination of
Amps and Volts 2)
3 Displays, 1 x AC ammeter CT connected 5 A + 1 x AC
voltmeter 0 – 500 V AC 2) + 1 Frequency 40 – 80 Hz
DG9307E1
72 X 36 frame size 240 V AC Auxiliary 1 display for VSDs and soft starters
9
DC voltmeter 0 – 10 V DC (Max. display 1999) 4)
DGP36VSD-15
420.00
DC ammeter 4 – 20 mA (Max. display 1999) )
DGP36VSD-45
475.00
4
Dimensions (mm)
DGP36VSD-15
DGP 72
DGP 96
DGP 36
Notes:
)
)
3
)
4
)
1
2
Price Schedule
‘Y8’
9 - 18
Auxiliary voltage standard 240 V AC, other voltages available on request.
Selectable input current. Contact NHP for selectable range.
Other combinations available on request.
IME Workshop programmed-specify input, scale e.g. 0-300 and range (span).
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Energy and power management
NHP offers a comprehensive range of products for energy and power management.
Analogue and Digital meters
Energy/kWh meters and pulse acquisition module with communications
Multi-function energy/power meters
Power Quality analysers
Energy Management software
Solid core and split core current transformers
NHP Monitoring Topology
CT’s: Transformers used to
measure current
Energy Meter/Power Analyser:
An interface for calculating and
measuring Electrical Parameters
Panelboard
PC: A computer running PowerSoft Software
logging data for all reporting needs
PowerSoft Software
er
9
a
net c pabil
ity
Eth
monday, october
Webserver: Remote viewing via RS485, LAN or Internet
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 19
kWh Meter selection chart
CE21175AO
CE20195A2
CE20195A4
CE4DT14A2
CE4DT14A6
LCD Display
Single phase system
Two phase system
Three phase system
Active energy kWh system
Reactive energy kvarh system
Partial active energy
Partial reactive energy
Current display
Voltage display
Power display
Power demand
Maximum demand power
Power factor
Total harmonic distortion
Active energy pulse
Reactive energy pulse
RS 485 modbus RTU
Digital inputs
Alarm outputs
Accuracy class 1 (active energy)
9
Direct connect
Current transformer connect
DIN rail mount
Panel mount
Self power supplied from measurement
Notes:
) Available with additional module.
) Use item 4DIN96ADAPTER
1
2
9 - 20
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
CE4DT06A2
CE4DT06A4
EM2172
DAV 53X0XX
EM2172
DAV 53X0SX
EM4DIN
100 ASX
)
1
WM22DIN
AV13DXX
EM24DIN
AV 93XISX
EM24DIN
AV 53DISX
)
1
9
)
2
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
)
2
GST not included
9 - 21
kWh Energy meter overview
CE 201
CE4DT
EM21 72D
Dimensions (mm) H x W x D
89 x 35 x 66
89 x 71 x 66
72 x 72 x 65
Description
and measurements
1-phase energy analyser
Single phase; kWh, A, V, kW,
Hz, PF, h
1 phase or 3 phase energy
analyser
System: kWh, kvarh, partial
(kwh, kvarh) W, VA, Var, Hz,
PF, Wdmd
Max: Wdmd
Phase variables: VL-L, A
1, 2, 3-phase energy meter
Sys: W, Var, PF, Hz, kWh, kvarh,
phase sequence
Phase variables: VL-L, VL-N, A,
PF, TRMS (V,I)
Voltage and currents
230-240 VL-L
Imax: 63 A
230 VL-L 1 phase
415 VL-L 3 phase
CE4DT14: In 1/5 A
CE4DT06: Imax: 63 A
*3 phase only
120/230 V AC,
400 V AC
In: 1/5 A
Accuracy Active
Reactive
Class 1 (AS 62053-21)
Class 1 (AS 62053-21)
Class 2 (AS 62053-23)
Class 1 (AS62053-21)
Class 2 (AS62053-23)
Display
6 DGT
8 DGT
3 DGT
(inst. variables)
6+1 DGT
(energies) LCD
Pulse
1 open collector
1 open collector
1 static
opto-mosfet
Alarm
None
None
None
Analogue
None
None
None
Serial communication
RS485 Modbus RTU
RS485 Modbus RTU
RS485
Modbus RTU/ JBUS RTU
Digital input
None
None
None
Power supply
Self supplied
Self supplied
Self supplied
Item Number
CE20195A2: meter + pulse
CE20195A4: meter + RS485
CE4DT14A2 CT connect meter
+ pulse
CE4DT14A6 CT connect meter +
pulse + RS 485
CE4DT06A2 direct connect
meter + pulse
CE4DT06A4 direct connect
meter + RS 485
EM2172DAV53XOXX:
meter + pulse
EM2172DAV53XOSX:
meter + pulse + RS485
Input specifications
Output specifications
General specifications
9
9 - 22
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
EM2172R
EM4 DIN
WM22
EM24 DIN
72 x 72 x 65
90 x 162.5 x 63
90 x 162.5 x 63
90 x 71 x 65
1, 2, 3-phase energy meter
Sys: W, Var, PF, Hz, kWh, kvarh,
phase sequence
Phase variables: VL-L, VL-N, A,
PF, TRMS (V,I)
3-phase modular energy meter
Sys & phase variables: W, Wdmd,
kWh, kvarh partial (kWh, kvarh)
TRMS (V,I)
3 phase modular power quality
analyser
System: phase variables; W, Var,
VA, PF, V, A, Hz, THD (V, I),
kWh, kvarh, partial (kWh, kvarh)
Wdmd, VAdmd
Max: Wdmd, VAdmd
1, 2, 3-phase energy analyser
Sys: VLL, VLN, , var, VA,
Wdmd, W, VAdmd, Hz, kWh,
kvarh, hour counter.
Max: Admd, Wdmd, VAdmd.
Single-phase: VLL, VLN, A, W,
var, VA, PF, Admd, kWh, kvarh.
TRMS method
400 VL-L
260 VL-N
In: 90 A CT (ø10 mm)
In: 150 A CT (ø16 mm)
In: 250 A CT (ø24 mm)
230/ 400 V AC, 380 - 660 V AC 400 VL-L
Imax: 100 A
Imax: 100 A
120/208 VL-L, 400 VL-L
In: 1/5 A,
Imax: 65 AAC;
Class 2 (AS62053-21) system
Class 1 (AS62053-21)
Class 2 (AS62053-23)
Class 1 (AS 62053-21)
Class 2 (AS 62053-23)
Class 1 (AS62053-21)
Class 2 (AS62053-23)
3 DGT instantaneous
6 + 1 DGT (energy readout)
3 ½ DGT backlighted LCD
8 DGT (energy)
3 ½ DGT instantaneons
7 ½ DGT energy
3x4 DGT (inst. variables)
8 DGT (energies) LCD
1 static opto-mosfet
2-open collector module
2 open collector
(accessory module)
2-open collector
option
None
1-open collector or
relay module
1 open collector or relay
(accessory module)
2-relay
option
None
None
1 (0-20 mA or 0-10 V DC)
(accessory module)
None
RS485 Modbus/ JBUS RTU
RS422/485 option module
RS422 or RS485 Modbus/
J Bus RTU
*RS485 with auxiliary supply
meter only
RS485 Modbus RTU
None
2 (Wdmd sync., tariff selec.)
None
3 digital inputs
Self supplied
Self power supply;
Auxiliary power supply:
230 V AC, 115 V AC, 48 V AC,
24 V AC, 18 to 60 V DC,
77 to 143 V DC
Self supplied or 230 V AC
Self power supply.
Auxiliary power supply:
18 to 60 V AC/DC,
115/230 V AC according to the
model
EM4DIN100AXX: self power
supply meter
EM4DIN100ASX: self power
supply meter + RS485
WM22DINAV13DXXX: 230 V
Auxiliary powered meter
WM22DINAV93XXXX: self power
supplied meter
EM2172RVV23XOSX: meter +
(3x90 A CTs) + RS 485 + pulse
EM2172RVV33XOSX: meter
(3 x 150 A CTs) + RS 485 + pulse
EM2172RVV53X0SX: meter +
(3 x 250 A CTs) + RS485 + pulse
9
EM24DINAV93XISX
Direct connect meter + RS 485
+ 2 inputs
EM24DINAV53DISX: CT connect
+ meter + RS485 + 2 inputs
EM24AV93XR2X: Direct connect
+ pulse
EM24DINAV53DR2X: CT connect
+ pulse
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 23
Multi-function
and power
quality analysers
selection chart
MF6FTU0026
MF6FT40026
MF6HT40006 2)
NEMO72B13
NEMO72LP
LCD Display
1 phase system
3 phase system
Active energy kWh system
Partial active energy
Negative active energy
Reactive energy kvarh reading
Partial reactive energy
Negative reactive energy
Phase voltage (Ph to N)
Linked voltage (Ph to Ph)
Min./Max. voltage
Phase current
Average current
Neutral current
Max. demand current
Frequency
Power factor
Voltage sequence diagnostic
Active power
Reactive power
Apparent power
Phase power
Power demand
Max. demand power
Total harmonic distortion
Hour run
Digital inputs
Pulse outputs
Analogue outputs
9
Alarm outputs
RS485 modbus RTU comms
Modular inputs
Modular outputs
Accuracy class 0.5s (active energy)
Accuracy class 1 (active energy)
Panel mount
DIN mount
230 - 240 V Aux power supply 1)
Notes: 1) Other supply voltages available on request.
9 - 24
2
) BACnet communications available on request.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
NEMO72LRS485 NEMO96HD 2)3)
3
EM2696AV53 EM2696AV53 WM1496AV53
WM30AV53H 3) WM40AV53H 3)
HI3S1
HR2S1
HR2S1
WM5A5H 3)
)
)
3
)
3
)
3
)
3
)
3
)
3
)
3
3
3
)
3
)
3
)
3
)
3
)
9
)
) Refer to pages 9 - 30 to 9 - 31 for additional modules.
3
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 25
Multi-function
and power
quality analyser
overview
MF6FT
MF6HT
Dimensions (mm) H x W x D
89.5 X 70 X 65.6
89.5 X 70 X 65.6
Description
and measurements
1, 3 phase multifunction meter
VL-L, VL-N, A, An, Admd,
Amaxdmd, Hz, PF, W, VA, Var,
Wdmd, VAdmd, Vardmd, Wmaxdmd,
VAmaxdmd, Varmaxdmd, kWh,
kvarh, h, voltage sequence
diagnostics
1, 3 phase power quality
analyser meter, VL-L, VL-N, A,
An, Admd, Amaxdmd, THDV,
THDI, Hz, PF, W, VA, Var, Wdmd,
VAdmd, Vardmd, Wmaxdmd,
VAmaxdmd, Varmaxdmd, kWh,
kvarh, h, voltage sequence
diagnostics
Voltage and currents
1 phase 30/260 VL-N
3 phase 50/450 VL-L
In: 5 A
1 phase 45-278 VL-N
3 phase 80-480 VL-L
In: 1/5 A
Accuracy Active energy
Reactive energy
Class 1 AS62053-21
Class 2 AS62053-23
Class 1 AS62053-21
Class 2 AS62053-23
Display
8 DGT energy
4 DGT instantaneous
8 DGT energy
4 DGT instantaneous
Pulse
1
1
Alarm
None
None
Analogue
None
None
Serial communication
RS485 Modbus RTU
RS485 Modbus RTU
- BACnet MS/TP
Digital input
None
None
Dupline
None
None
Power supply
230 V AC
230 V AC
Cat. No.
MF6FT40026: meter + RS485
MF6FTU0026: meter + pulse
MF6HT40006: meter + RS485
MF6HTB0006: meter + BACNet
Input specifications
Output specifications
General specifications
9
Notes:
9 - 26
) Other supply voltages available on request.
1
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
NEMO72B
NEMO72L
NEMO96HD
72 x 72 x 81
72 x 72 x 81
96 X 96 X 103
1, 3 phase multifunction meter 1, 3 phase power quality anaVL-L, VL-N, A, W, Var, VA, An, F, lyser, VL-L, VL-N, A, An, Admd,
PF, h, Wdmd, Wmaxdmd, Admd
Amaxdmd, F, PF, voltage, sequence diagnostics, W, Va, Var,
Wdmd, VAdmd, Vardmd, Wmaxdmd,
kWh, kvarh, THDI, h
1, 3 phase power quality
analyser, VL-L, VL-N, VL-Lmin,
VL-Lmax, THDV, THDI (22nd
harmonic), A, An, Admd,
Amaxdmd, AaveW, VA, Var,
Wdmd, VAdmd, Vardmd, Wmaxdmd, VAmaxdmd, Varmaxdmd, PF,
Hz, h, kWh±, kvarh±
Input specifications
1 phase 195-260 VL-N
3 phase 340-450 VL-L
In: 5 A
1 phase 50-290 VL-N
3 phase 80-500 VL-L
In: 5 A
1 phase 50-290 VL-N
3 phase 80/500 VL-L
In: 1/5 A
N/A
Class 1 AS 62053-21
Class 2 AS 62053-23
Class 0.5s AS62053-22
Class 2 AS62053-23
4 DGT instantaneous
8 DGT energy
4 DGT instantaneous
4 DGT instantaneous
8 DGT energy
None
1
2
2
None
2
None
None
2
None
RS 485 modbus RTU
RS485 - Modbus RTU
- BACNet MS/TP
RS232 - Modbus RTU
None
None
2
None
None
None
Self supplied
230 V AC
80 - 265 V AC
110 - 300 V DC
Nemo 72B13: meter
Nemo72LP: meter + pulse
NEMO96HD: meter
Nemo72LRS485: meter + RS485 NEMO96HD1000: meter + RS485
(additional modules on page
9 - 30)
Output specifications
General specifications
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
9
GST not included
9 - 27
Multi-function
and power
quality analyser
overview
EM26 96
WM14 DIN/96 Basic & Advanced
Dimensions (mm) H x W x D
96 X 96 X 61.5
90 x 107.8 x 64.5 (DIN)
96 x 96 x 61.5 (96)
Description
and measurements
3-phase power quality
analyser, Sys: VLL, VLN, An, var,
VA, W, Wdmd, VAdmd, Hz, %THD-V,
%THD-A (15th harmonic), kWh,
kvarh, hour counter. Max: Admd,
Wdmd, VAdmd, Single-phase: VLL,
VLN, A, W, var, VA, PF, Admd. kWh,
kvarh, TRMS method
3-phase power analyser System:
VLL, VLN, An, PF, W, var, VA,
Wdmd, VAdmd, Hz, kWh, kvarh,
hour counter; Max: Wdmd, VAdmd.
Single phase: VLL, VLN, A, Admd,
PF, W, var, VA, %THD-V, %THD-A;
Max: VLN, A, Admd, W. Min: VLN,
A, PF
Voltage and currents
120 - 208 VL-L, 400/660 VL-L
In: 1/5 A
3-phase unbal. load
100/208 VL-L/5(6) AAC
400/660 VL-L/5(6) AAC
In: 5 A
Accuracy Active energy
Reactive energy
Class 1 (AS62053-21)
Class 2 (AS62053-23)
Class 1 AS62053-21
Class 2 AS62053-23
Display
3 x 4 DGT (inst. variables)
8 DGT (energies) LCD
3x3 DGT,
8+1 DGT (energy), LED
Pulse
2-open collector
2-open collector
(Basic and Advanced)
Alarm
2-relay
2-relay (PLC-type, AND/OR
control function on 16
variables) (Advanced only)
Analogue
None
None
Serial communication
RS485 (2 wire)
RS422/485
Digital input
3 (Wdmd sync. tariff selec.)
None
Dupline
None
None
Power supply
18 - 60 V AC/DC
90 - 260 V AC/DC
18 to 60 V AC/DC, (Advanced)
90 to 260 V AC/DC (Advanced)
24 V AC (Basic)
48 V AC (Basic)
115 V AC, 230 V AC (Basic)
18 to 60 V DC (Basic)
Cat. No.
EM2696AV53HI3SI: meter +
RS485 + 2 digital output
EM2696AV53HR2SI: meter +
RS485 + (pulse/alarm)
WM1496AV53HR2S1: meter +
RS485 + (pulse/alarm)
Input specifications
Output specifications
9
9 - 28
General specifications
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
WM30
WM40
WM5 96
96 x 96 x 50
96 x 96 x 50
96 x 96 x 124 (WM5)
1, 2, 3-phase power quality
analyser, VL-N, VL-L, A, VA, var,
W, PF, Hz, phase sequence
diagnostics, Asy, VLL, Asy VL-N,
h, kWh±, kvarh±, THDI, THDV
(32nd harmonic)
1, 2, 3-phase power quality
analyser, VL-N, VL-L, A, VA, var,
W, PF, Hz, phase sequence
diagnostics, Asy VL-L, Asy
VL-N, h, kWh±, kvarh±, C, Trip
counter, THDI, THDV (32nd
harmonic)
Smart power quality analyser
(WM5)
Sys: VLN, VLL, An, W, var, VA,
PF, Hz, kWh, kvarh.
Single phase: VLN, VLL, A, W,
var, VA, PF, THD-V, THD-A.
THD and single H up to the
63rd H (V, A)
1 phase 160-480 VL-N
3 phase 277/830 VL-L
In: 5 A
1 phase 160-480 VL-N
3 phase 277/830 VL-L
In: 5 A
120/208 VLL, 400/690 VLL
In: 1/5 A
Class 0.5 AS62053-22
Class 2 AS62053-23
Class 0.5s AS62053-22
Class 2 AS62053-23
Class 0.5 (AS62053-21)
Class 2 (AS62053-23)
4 DGT instantaneous
10 DGT energy
4 DGT instantaneous
10 DGT energy
4 x 4 backlighted LCD (WM5)
4 x 9 DGT (energy) (WM5)
2
6
up to 16 made by: single dual
or quadruple open collector or
relay modules
2
6
Up to 16, made by: single dual
or quadruple open collector or
relay modules
2
4
Up to 8, made by single/dual
(mA/V) output modules
RS485
Modbus RTU
BACnet MS/TP
Ethernet TCP/IP
RS485
Modbus RTU
BACnet MS/TP
Ethernet TCP/IP
RS422/485 module
RS232+RTC module
Optical port (ANSI C12.18/
Modbus), Ethernet port 10/100
base TX
None
6
Up to 12 (Wdmd, VAdmd, sync.)
None
None
None
90 - 260 V AC/DC
90 - 260 V AC/DC
18 to 60 V AC/DC,
90 to 260 V AC/DC
WM30AV53H: meter
WM30AV5HXXXXS1XX: meter +
RS485 (additional modules on
page 9 - 31)
WM40AV53H: meter
WM5A5H00003
All additional modules on page Additional modules on page
9 - 31.
9 - 30.
Input specifications
Output specifications
9
General specifications
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 29
Accessories and modules
Position
NEMO 96 HD
IF96001
IF96002
Component description
Base Unit
RS485 Communication (Modbus RTU)
RS232 Communication
2 Pulse Output (SPST-NO)
2 Analogue Outputs (0/4..20 mA)
2 Alarm Outputs (SPST)
Neutral Current
PROFIBUS Communication
ONWorks Communication
2 In/2 out SPST
2 In/2 out 24 V DC
Memory + RS485 (Modbus RTU)
Bacnet MS/TP
Ethernet TCP/IP
Temperature sensor PT100
N.Max
A
B
1
1
2
2
2
1
1
1
2
2
1
1
1
1
q
q
q
q
q
q
C
D
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
Cat. No.
NEMO96HD
IF96001
IF96002
IF96003
IF96004
IF96005
IF96006
IF96007
IF96009
IF96010
IF96011
IF96012
IF96014
IF96015
IF96016
Price $
Price $
520.00
980.00
305.00
305.00
117.00
700.00
200.00
295.00
820.00
820.00
390.00
390.00
780.00
440.00
630.00
360.00
Accessories - Communications interface
Input
RS485
Output
RS232
Power supply
240 V AC - auxiliary input
Cat. No.
PC485
RS485
USB
Self supplied
UPORT1130
RS485
Ethernet
240 V AC power supply included
SIUTCP2
175.00
1050.00
Energy pulse acquisition module with communications
Pulse input
Output
Power supply
Cat. No.
12
RS485 Modbus/JBus
240 V AC 50 Hz
D4C-R12
WM5
D4C-R12
9
Description
WM5-96 base with ANSI local port
WM5-96 base without local port
Power supply (18-60 V AC/DC)
Power supply (90-260 V AC/DC)
Measuring input (AV5: 400/ 690 VL-L)
Measuring input (AV6: 120/208 VL-L)
RS485 port (9 600 bps) (1-port)
RS485 port (115,200 bps) (1-port)
Ethernet/ Internet port (1-port)
Analogue output (20 mA DC) (2-out)
Analogue output (10 V DC) (2-out)
Analogue output (+/-5 mA DC) (2-out)
Relay output (1-out)
Relay output (1-out)
Open collector output (1-out)
Open collector output (2-out)
Digital input (4-out)
Digital inputs + Aux (3-in)
RS232 port + RTC (9600 bps) (1 port)
Price $
960.00
Position
A
B
C
D
E
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
Cat. No.
AD2001
AD2000
AP1021
AP1020
AQ2030
AQ2031
AR1034
AR2040
AR1061
AO2050
AO2051
AO2052
AO1058
AO1035
AO1036
AO1037
AQ1038
AQ1042
AR1039
Price $
1660.00
1600.00
205.00
197.00
415.00
580.00
126.00
193.00
390.00
340.00
310.00
390.00
64.50
108.00
108.00
197.00
71.50
95.50
205.00
Price Schedule
‘Y9’
9 - 30
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Accessories and modules
WM30 / WM40
Position
Description
Main features
WM30 base provided with display, qªInputs/ system: AV5.3
power supply, measuring inputs
qª/NVDQªRTOOKXª'
WM40 base provided with display, qª(MOTSRªRXRSDLª 5
power supply, measuring inputs,
qª/NVDQªRTOOKXª'
optical front communication port
qªBG@MMDK
Dual relay output (SPDT)
A
B
C
Cat. No.
WM30 AV5 3 H
Price $
1130.00
WM40 AV5 3 H
1330.00
q
M O R2
166.00
q
M O O2
166.00
qªª K@QLªNQª@MCªOTKRDª
output
qªBG@MMDKª
qªª K@QLªNQª@MCªOTKRDª
output
Dual static output
(AC/DC Opto-Mos)
Dual analogue output (+20 mA DC) qªBG@MMDK
qª ) q
M O A2
345.00
Dual analogue output (+10 V DC)
qªBG@MMDK
qª ) q
M O V2
345.00
RS485/ RS232 port module
qª,@Wªª*AOR
BACNet-IP port module
qª!@RDCªNMª$SGDQMDSªATR
Ethernet TCP IP module
Combined digital inputs and
Relay outputs (SPDT)
qª1)ªª!@RD3
qªHMOTSªBG@MMDKR
1
1
q
M C 485 232
235.00
q
M C BAC IP )
680.00
q
2
M C ETH
620.00
qª )
M F I6 R4
620.00
qª )
M F I6 O6
620.00
1
qª ) M C 485 232 M
740.00
1
qª ) M C ETH M
900.00
1
2
qª ) M C BAC IP M )
960.00
1
qªNTSOTSªBG@MMDKR
qª"NLOKDWªS@QHEEªLFLS
qª.1 -#ªKNFHBªLFLS
Combined digital inputs and
Static outputs (AC/DC Opto-Mos)
qªHMOTSªBG@MMDKR
1
qªNTSOTSªBG@MMDKR
qª"NLOKDWªS@QHEEªLFLS
qª.1 -#ªKNFHBªLFLS
Price Schedule
‘Y9’
RS485/ RS232 port module with
integrated memory
qª,@Wªª*AOR
Ethernet port module with
integrated Memory
qª1)ªª!@RD3
BACNet IP port moduile with
integrated memory
qª!@RDCªNMª$SGDQMDSªATR
Temperature + process signal
measurements (ºC/ºF)
qªf/StªSXODªHMOTS
Direct neutral current
measurement + Temperature +
Process signal measurement
(ºC/ºF)
qª Rª@ANUDª
ªRHFM@Kªª
Notes:
1
2
)
)
qª#@S@ªRS@LOHMF
qª#@S@ªRS@LOHMF
qª#@S@ªRS@LOHMF
qª )
MATP
300.00
qª )
MATPN
730.00
1
qªªL ªHMOTS
1
input like a common
current input (CT ratio
9
etc.)
Only applicable to WM40.
MSTP available on request.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 31
Energy meters
Branch Feeder Monitor - Multi-circuit energy meter
BFM136
SATEC’s Branch Feeder MonitorTM (BFM) is the next generation in energy management for
multi-point power solutions. Ideal for both new and retrofit projects, the BFM automatically provides
metering, demand and energy readings, logging and multi-tariff (TOU) data. The BFM monitors up to
12 three phase circuits or 36 single phase circuits, or any combination of single or three phase circuits.
This flexibility makes the BFM perfect for data centre applications or multi-tenant facilities such as office
buildings and shopping malls. The compact BFM is designed to easily fit into existing panel boards or be
flush mounted nearby, thus eliminating the need for expensive retrofit projects or for allocating extra
space for the device.
The BFM monitors up to 36 currents via external Current Transformers (CTs). Each CT measures and reports
the current consumed by each of the branch circuits at the panel board. Single or multiple circuits can be
defined into groups for easy totalisation of functional areas. This flexibility allows a simple reassignment
of circuit groups without wiring changes, and allows for easy changes when tenants move in and out. Main
panel board or load center installation makes for a valuable saving of both time and money.
Features and benefits
CT4
CT1L
CT1
9
CT1S
Multi-point power, energy and demand data logging.
Data storage
– Real Time Clock (TRC) and Flash memory for data and event logger.
– TOU (Time Of Use): the TOU function stores energy consumption data according to the programmed
time schedule.
– Daily energy tariff profile and maximum demands programmable interval for load profile.
Logging for any type of parameters, for all profiles.
Local LCD display providing up to 36 channels of consumption readings
Cost effective, space-saving compact design for easy installation into existing electric panelboards.
Automatic installation verification: The BFM performs automatic synchronisation between voltages and
currents per phase.
Standard Communication Platforms
Protocols:
– Modbus RTU
– Modbus TCP/IP
Ports:
– Standard: RS485 port
– Optional: Ethernet TCP/IP, dial-up modem, RS232, additional RS485/422 port
High accuracy 0.5S
Input
– Current inputs: 36 per device.
– Measured currents, per phase: direct 100 or 400 Amp or up to 5000 A primary in conjunction with
conventional 5 A or 1A secondary CT.
– Voltage input: wide range 88 – 138 V AC (115) or 176 – 265 V AC (400/230).
– Self power supply: 3-phase + N fed from the measured voltages.
Alarm configuration: Over/ under voltage, over current, over kW, over kVA, over/ under frequency.
Three year warranty.
Description
Branch Feeder Monitor - Ethernet + RS485
Branch Feeder Monitor - RS485
BFM 100 A CT 12 mm 2.5 m cable
BFM 100 A CT 23 mm 2.5 m cable
BFM 100 A split CT 16 mm 2.5 m
BFM 400 A CT 26 mm 2.5 m cable
BFM 400 A split CT 30.5 mm 2.5 m cable
BFM 800 A split CT 50 x 80 mm 2.5 m cable
BFM 1200 A split CT 121 x 80 mm 2.5 m cable
Cat. No.
BFM13650HZETHD
BFM13650HZ0D
CT1
CT1L
CT1S
CT4
CT4S
CT8S
CT12S
Price $
POA
POA
POA
POA
POA
POA
POA
POA
POA
Price Schedule
‘Y9’
9 - 32
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Energy Management software
P PowerSoft
PowerSoft is an energy management analysis software platform designed by Carlo
Gavazzi. It has been specifically developed to interface, by means of the Modbus protocol
(RTU and TCP/IP), with the Carlo Gavazzi energy meters. The software allows the user
to correctly and efficiently manage an electrical distribution system by monitoring the
consumption of the system, checking the demanded power peaks and adopting accurate
analysis and data processing tools. The software consists of a main core module PowerSoft and of a series of optional add-in modules to compliment PowerSoft.
The modules are as follows:
P Interactive synoptics
A fully customisable set of animated interactive synoptics allows the user to browse the
monitored electrical distribution system and to see any alarm condition at a glance. A
series of links allows the access of real-time data of each instrument or to pass on to
other synoptic pages.
P Real-time display
Each instrument has a 4-page section where its real-time data can be examined in
different ways; analytically in a complete table including all the variables and by means
of a Fresnell diagram. It is possible to check the status of the digital inputs and check
or switch the digital output for test purposes or to remotely act on an external device.
A table displays all the data from up to 5 instruments per page simultaneously, allowing
the user to carry out a simple and immediate data comparison.
P Trends
A selectable set of variables (different from instrument to instrument) can be stored
in the PowerSoft database with a selectable time interval so to build-up a history of
the installation. All the data can be analysed later on in both graphical and analytical
format and exported in various formats (wmf, csv, xls). Up to 4 variables (from the same
or from a different instrument) can be displayed and compared at the same time. With
simple and intuitive procedures it is also possible to zoom in on the graph or analyse it
in detail with a cursor, freely choosing the time period to be displayed.
Description
Powersoft software package
Cat. No.
POWERSOFT
Price $
1140.00
9
Price Schedule
‘Y3’
Notes:
Contact NHP for more details or for free DEMO version of Powersoft.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 33
Energy Management software
Add-in modules:
Carlo Gavazzi has designed ‘Add-in’ modules to compliment the PowerSoft Software.
These modules have been specifically designed as separate components to reduce cost
overheads of energy management software.
P Costs estimation
The software allows the estimation of costs, relevant to a selected period, due to the
energy, water and gas consumption. This is useful to perform the cost allocation among
the monitored lines, to display the daily trend of the consumption or to identify the
reasons of any penalty. This feature is structured to manage a complex multi-tariff
contract. The different tariffs during the day and the distribution of the typical-days
among the year can be set according to the supplier tariff regulations in a very easy and
extremely flexible way. Up to 12 tariffs, 24 tariff changes per day, 365 different typicaldays per year can be simply configured.
Description
Powersoft add-in modules: Cost estimation
Cat. No.
PWSBILL
Price $
830.00
PWSTARIFF
330.00
P Statistical analysis
PowerSoft carries out statistical analysis on the power trends and energy consumption by
extrapolating the demand of each day of the week, the week-based consumption trends
and the estimation of the ideal installed power for each tariff, calculated with a selectable
confidence level. All this information is aimed to build-up an optimised load profile so as
to negotiate a better contract with the utility supplier. To improve the reliability of the
analysis, any data with abnormal consumptions due to external events can be filtered and
removed, as well as the weekends and the holidays.
Description
Powersoft add-in module: Statistical analysis
Cat. No.
PWSANALYSIS
Price $
1140.00
P Alarms and events
An active alarms window (that automatically pops up in any case of alarm) advises the
user if a set-point has been exceeded or if a communication error is present; it allows
the qualified users to acknowledge the selected alarm. A proper database allows to access
the list of the events (login, logout, startup, alarm acknowledgment, etc.) and of the
alarms (set-points, communication errors, missing data storage, etc.), also to carry out
filter-based searches. The set-point alarms can be associated to both an up and a down
threshold on all the variables measured by all the instruments of the network. The alarm
can be software, being displayed in the Active alarms windows and stored in the Alarms
and events log, or hardware-based, being stored as above and switching the digital
output of the instrument that is pointing out the anomaly. This powerful tool allows the
operator to monitor any anomaly of the installation and of the loads in real-time, so as
to promptly decide and plan any maintenance actions, thus avoiding possible damages to
the loads and/or expensive stopping of the machinery.
9
Description
Powersoft add-in module: Alarms and events
Cat. No.
PWSALARM
Price $
620.00
Price Schedule
‘Y3’
9 - 34
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Energy Management software
Page 1 of 1
Energy
rev. 1.05
UTILITY 1
from 2011/11/01 - 00:00 to 2011/11/30 - 23:59
Costs
Quantity
Units Unit price ( $ )
Fixed costs
T1
T2
T3
T4
23704.38
18438.44
15001.25
16269.88
kWh
kWh
kWh
kWh
Total active energy
Total reactive energy
73413.95
11184.94
kWh
kvarh
0.00
1704.08
kvarh
kvarh
Reactive energy threshold 1
Reactive energy threshold 2
0.06
0.15
0.14
0.13
0
0
Subtotal ( $ )
30.00
1422.26
2765.77
2100.18
2115.08
0.00
0.00
Totals
Total
Total % VAT
8433.29
0.00
TOTAL ( $ )
8433.29
P Advanced reporting
This add-in module allows the collected data to be exported through PowerSoft in an Excel
file format.
The window related to this module is divided in two parts:
On the left there’s a list of the available templates
On the right there are all the generation variables:
Each template can be modified according to the customer’s personal need. The template is
an Excel file.
Once the template has been defined and both the starting and ending dates of the period
have been fixed, a custom file is generated considering all the stored values via PowerSoft.
Description
Powersoft add-in module: Advanced reporting
Cat. No.
PWSREPORT
Price $
1140.00
P Advanced Harmonic Analysis
For the WM5 meter with Ethernet Comms
This module is for advanced analysis of the harmonic content in your system.
The module consists of a Wave’s analysis tool, Manual Trigger to capture instantaneous
harmonics, Historical Harmonics, Activities log, Harmonic Display and Zoom and
Translations tool.
Description
Powersoft add-in module: Advanced harmonic analysis
Cat. No.
PWSWAVE
Price $
1140.00
P Internet connectivity/Automatic emailing
PowerSoft can manage an automatic e-mailing module, able to notify the electrical system
status to one or many e-mail addresses. The e-mailing can be carried out on regular
basis and/or as a consequence of a defined alarm or event. In cost-sharing applications,
the energy/utility bill of each final user can be sent to his/her e-mail box, while the
administrator can receive the consumptions summary of all the customers. The web-server
module allows remote access to PowerSoft, using a standard browser without additional
licenses, in order to access all the real-time information and historical data from wherever
you are.
Description
Powersoft add-in module: Email scheduler
Cat. No.
PWSMAIL
Price $
415.00
Powersoft add-in module: Webserver, internet
PWSWEB
920.00
connectivity
9
Price Schedule
‘Y3’
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 35
Current transformers for cables
Housing, self-extinguishing thermoplastic
Highest system voltage, 720 V RMS
Test voltage, 3 kV RMS 50 Hz for 1 min.
Frequency of operation, 40-60 Hz
Insulation Class, B (130 °C)
Compact miniature CT
Short circuit thermal current (Ith) 60-100
times rated primary current for 1 sec.
Rated dynamic current 2.5 times Ith
Rated continuous thermal current 120 % of
rated primary current
Accuracy class
DIN rail mountable
CL 0.5
VA
CL 1
VA
Ratio:
CL 3
VA
TAI BB - Cable Ø 21 mm max.
TAI BB
Primary / Secondary current - 5 A or 1 A
1A
Price $
–
-
-
1
TAI BB 40_
5A
Price $
54.00
-
1.25
1.5
TAI BB 50_
80.00
–
-
1.25
2
TAI BB 60_
54.00
–
-
1.5
2.5
TAI BB 75_
54.00
–
-
1.5
2.5
TAI BB 80_
54.00
–
2
2.5
3.5
TAI BB 100_
54.00
–
2.5
3.5
4
TAI BB 120_
54.00
–
3
4
5
TAI BB 150_
89.00
–
4
5.5
6
TAI BB 200_
54.00
–
5
6
7
TAI BB 250_
54.00
–
6
7.5
8
TAI BB 300_
54.00
–
Cat. No 1)
TA 327 - Cable Ø 27 mm, Busbar 30 x 10 mm max.
TA 327
-
-
1.5
TA 327 40_
62.00
89.00
-
-
2.5
TA 327 50_
62.00
89.00
-
-
2.5
TTA 327 60_
62.00
89.00
-
1.5
3.5
TA 327 75_
62.00
89.00
-
1.5
4
TA 327 80_
62.00
89.00
-
2.5
5
TA 327 100_
62.00
89.00
-
3.5
5.5
TA 327 120_
62.00
89.00
1.5
5.5
6.5
TA 327 150_
62.00
89.00
4
7
8.5
TA 327 200_
62.00
89.00
6
9
11
TA 327 250_
62.00
89.00
7.5
11
13.5
TA 327 300_
62.00
89.00
10.5
15
18
TA 327 400_
75.00
105.00
12
18
22
TA 327 500_
75.00
105.00
14.5
21.5
26
TA 327 600_
75.00
104.00
TA 432 - Cable Ø 32 mm, Busbar 40 x 10 mm max.
9
TA 432
Price Schedule
‘Y8’
9 - 36
Note:
1
3
6
TA 432 150_
65.50
95.00
1.5
3
6
TA 432 200_
65.50
95.00
2.5
5
8
TA 432 250_
65.50
95.00
4
8
12
TA 432 300_
71.00
95.00
8
12
15
TA 432 400_
71.00
95.00
10
12
15
TA 432 500_
85.00
95.50
12
15
15
TA 432 600_
85.00
95.50
10
12
15
TA 432 750_
85.00
113.00
10
12
15
TA 432 800_
89.50
113.00
10
12
15
TA 432 1000_
91.00
113.00
) Add primary and secondary current + 5 A or 1 A suffix to complete Cat. No.
1
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Current transformers
Horizontal busbar mount and terminals
TAS127BH1500/5A
Compact design busbar CTs
Reduced overall dimensions and weight
Mounting parts, terminals and busbar clamps supplied as standard
Suits popular busbar dimensions
Accuracy class
Ratio:
CL 0.5
CL 3
CL 1
VA
Primary / Secondary current 1)
VA
VA
TAS 65 Busbar 63 x 32 mm (Max.) Cat. No.
Price $
Dimensions in mm:
8
10
12
TAS 65H5005A
86.50
8
12
15
TAS 65H6005A
86.50
10
15
15
TAS 65H7505A
113.00
12
15
20
TAS 65H8005A
113.00
15
20
25
TAS 65H10005A
113.00
15
20
25
TAS 65H12005A
126.00
20
25
30
TAS 65H15005A
162.00
TAS 65H
TAS 102 Busbar 100 x 36 mm (Max.) Cat. No.
38 x 102=A
Price $
10
15
20
TAS 102H10005A
136.00
12
15
25
TAS 102H12005A
168.00
15
20
30
TAS 102H15005A
168.00
20
30
40
TAS 102H20005A
225.00
25
30
50
TAS 102H25005A
225.00
25
30
50
TAS 102H30005A
260.00
TAS 102H
TAS 127B Busbar 125 x 52 mm (Max.) Cat. No.
Price $
20
30
40
TAS 127BH15005A
196.00
20
30
40
TAS 127BH16005A
196.00
25
40
50
TAS 127BH20005A
196.00
30
50
60
TAS 127BH25005A
230.00
40
60
60
TAS 127BH30005A
230.00
50
60
60
TAS 127BH40005A
275.00
TAS 127BH
Terminal covers (IP 40)
Cat. No.
Price $
TAS 65, 102 & 127B
TCTAS65105127B
21.40
9
Current flow diagram
Price Schedule
‘Y8’
Notes:
1
) Transformers available as 1 A secondary on request, contact NHP.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 37
Current transformers
Vertical busbar mount and terminals
Compact design busbar CTs
Reduced overall dimensions and weight
Mounting parts, terminals and busbar clamps supplied as standard
Suits popular busbar dimensions
Accuracy class
CL 0.5
VA
TAS 65
TAS102_5A
Dimensions in mm:
Ratio:
Primary / Secondary current 1)
Busbar 63 x 32 mm (Max.) Cat. No.
Price $
CL 1
VA
CL 3
VA
8
10
12
TAS 65 5005A
8
12
15
TAS 65 6005A
86.50
10
15
15
TAS 65 7505A
113.00
12
15
20
TAS 65 8005A
113.00
15
20
25
TAS 65 10005A
113.00
15
20
25
TAS 65 12005A
126.00
20
25
30
TAS 65 15005A
162.00
86.50
TAS 65
TAS 102 Busbar 100 x 36 mm (Max.) Cat. No.
A=
102
x
38
TAS 102
10
15
20
TAS 102 10005A
136.00
12
15
25
TAS 102 12005A
168.00
15
20
30
TAS 102 15005A
168.00
20
30
40
TAS 102 20005A
225.00
25
30
50
TAS 102 25005A
225.00
25
30
50
TAS 102 30005A
260.00
TAS 127B Busbar 125 x 52 mm (Max.) Cat. No.
TAS 127B
Price $
Price $
20
30
40
TAS 127B 15005A
196.00
20
30
40
TAS 127B 16005A
196.00
25
40
50
TAS 127B 20005A
196.00
30
50
60
TAS 127B 25005A
230.00
40
60
60
TAS 127B 30005A
230.00
50
60
60
TAS 127B 40005A
275.00
Terminal covers (IP 40)
Cat. No.
Price $
TAS 65, 102 & 127B
TCTAS65105127B
21.40
9
P2
P1
Price Schedule
‘Y8’
9 - 38
Note:
) Transformers available as 1 A secondary on request, contact NHP.
1
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
CAGE CLAMP® terminals
Disconnect terminals – DIN 35 mounting
Series 282
Measuring set for a single phase current transformer
Measuring set for a 3 phase current transformer
Pairs of disconnect
links are interlocked by
means of the locking
covers.
After the interlocking
has been released,
testing of the
measured value
is also possible.
B = shorting jumper
P = test socket
282-870 Terminal blocks required :
282-424
282-387
282-882
Terminal blocks required : 2 x disconnect/test terminal blocks
1 x jumper, orange
1 x end plate, orange
1 x locking cover
282-CT1
CT Test / Disconnect Terminal
6 x disconnect/test terminal blocks
3 x jumpers, orange
3 x end plates, orange
3 x locking covers
282-CT2
CT Test / Disconnect Terminal
282-CT2
282-CT1
Circuit Jumper
3 x 282811 Terminals
1 x 282365 End plate
Switches
1 x 282443 Circuit jumper
Test Plugs
2 x 282821 Terminals
Test Plugs
1 x 282366 End plate
Switches
3 x 282370 Lock outs
1 x 282432 Jumper
2 x 282370 Lock outs
Jumper
1 x 210423 Label
1 x 210424 Label
Normal Operation
Transformer Short Circuit
Normal Operation
Transformer Short Circuit
1
O
1
X
1
X
1
X
2
X
2
X
2
X
2
X
3
X
3
X
Note: X = Closed
For short
circuit move
switch to
closed position.
Notes:
Note: X = Closed
Note: X = Closed
Note: X = Closed
O = Open
Price Schedule
‘B2’
282-870
282-424
282-387
282-882
9
For short circuit
fully insert
captive jumper.
Refer to catalogue Part B, section 10 for further details and pricing.
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 39
Split core current transformers
Allows installation without disconnecting cables or busbar circuits
Suitable for existing installation, retrofit applications
Supplied with mounting screws and terminal covers
2 sets of secondary terminal (CTD range)
Model
A
Class 1
(V A)
Class 3
(V A)
CTD-5S
125
1.5
1.5
150
1.5
200
1.5
250
400
CTD-6S
CTD-8S
CTD-10S
TP816 )
1
Window
size (mm)
Cat. No.
CTD5S1255AXXX
Price $
210.00
2.5
CTD5S1505AXXX
225.00
5
CTD5S2005AXXX
225.00
1.5
5
CTD5S2505AXXX
230.00
5
10
CTD5S4005AXXX
250.00
400
2.5
5
CTD6S4005AXXX
270.00
600
7.5
15
CTD6S6005AXXX
295.00
800
10
15
CTD6S8005AXXX
295.00
1000
10
15
CTD6S10005AXXX
310.00
400
3
5
CTD8S4005AXXX
285.00
600
6
10
CTD8S6005AXXX
310.00
800
8
12
CTD8S8005AXXX
310.00
1000
12
20
CTD10S10005AXXX
345.00
1200
15
25
CTD10S12005AXXX
370.00
1600
20
30
CTD10S16005AXXX
550.00
2000
25
40
CTD10S20005AXXX
620.00
2500
30
50
CTD10S25005AXXX
540.00
3000
30
50
CTD10S30005AXXX
660.00
3200
30
50
CTS10S32005AXXX
660.00
2500
20
25
TP81625005A
1470.00
3000
25
30
TP81630005A
1470.00
4000
25
30
TP81640005A
1470.00
26 x 32
50 x 52
30 x 80
50 x 126
80 x 160
See next page for dimensions.
9
Notes:
Price Schedule ‘Y9’
9 - 40
) Class 0.5 available upon request.
More current ratio and physical sizes available on request, contact NHP.
1
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Split core current transformers
Dimensions (mm)
CTD-5S
CTD-6S
CTD-8S
CTD-10S
TP816
9
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 41
Transducers
Accuracy class 0.5
DIN rail, base or flush mountable
Selectable outputs on most transducers
AC Current transducers
1 A CT
Output 1)
Selectable
Auxiliary
supply 2)
240 V AC
Cat. No.
TM3I310
435.00
1 A CT
Selectable
110 V AC
TM3I210
435.00
5 A CT
Selectable
240 V AC
TM3I330
435.00
5 A CT
Selectable
110 V AC
TM3I230
435.00
5 A CT
0-20 mA
Self supplied
TM2IA34
380.00
0 - 110 V AC
Output
Selectable
Auxiliary
supply 2)
110 V AC
Cat. No.
TM3U220
Price $
435.00
0 - 250 V AC
Selectable
240 V AC
TM3U370
435.00
0 - 500 V AC
Selectable
240 V AC
TM3U3C0
435.00
Input
current
AC Current transducer
TM3I310
Price $
AC Voltage transducers
Voltage
input
AC Voltage transducer
TM3U370
TM8P03120
TM8P Programmable transducer
One transducer to measure, display and transmit the following electrical quantities:Single or three phase networks –
Active, reactive and apparent power
Balanced or Unbalanced
Power factor cos
Frequency
Phase angle
Maximum demand
Peak maximum demand (display only) 3)
Programmable outputs:
Current rated values – 0 to 5 mA, 0 to 10 mA, 0 to 20 mA or 4 to 20 mA
Voltage rated values – 0 to 10 V or 1 to 5 V
Negative values: – 5.0.5 mA; – 10.0.10 mA; – 20.0.20 mA; 10.0.10 V
5 Amp input – direct connection up to 500 V
Beginning and full scale calibration field-adjustable.
Ordering details
5 A CT
Output
Programmable
Auxiliary
voltage
110 V AC
Cat. No.
TM8P02120
Price $
800.00
5 A CT
Programmable
240 V AC
TM8P03120
800.00
5 A CT
Programmable
20-150 V DC
TM8P0H120
800.00
Input
9
Notes:
Price Schedule
‘Y8’
9 - 42
) Output selectable 7 ranges (except TM2IA34).
Values: 0-5/10/20 mA; 4-20 mA
0-5/10 V; 2-10 V
2
) Auxiliary supply - 24/48/110 V DC or self-supplied available on indent, P.O.A.
3
) Peak power maximum demand is display only (not associated to output).
1
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
Combined current transformer
and transducer
Compact design - two devices in one unit saves space, time and money
Alternating current units available up to 400 A AC in one size on request
Direct current units available up to 1000 A DC in one size
Simple rotary switch selection of primary current range
Ideal device for measurement and control of electrical equipment
Suitable for PLC, data logger and analogue measuring devices
International approvals EMC, IEC and CE
Combined current transformer (AC) and transducer
Selectable primary current ranges 25 / 50 / 75 / 100 / 125 / 150 / 175 / 200 / 225 A AC
TT35
Auxiliary
supply
Connection Output
10 - 30 V DC 2 wire
4 - 20 mA
Hole
Dimensions
H x W x D (mm) dia. (mm)
35
94 x 92 x 56
240 V AC
4 wire
4 - 20 mA
135 x 92 x 56
110 V AC
4 wire
4 - 20 mA
135 x 92 x 56
Cat. No.
TT35 10-30 V DC
Price $
680.00
35
TT35A 240 V AC
680.00
35
TT35A 110 V AC
680.00
Combined current transformer (DC) with hall effect transducer 1)
Primary current range 0 - 400 A DC unidirectional current flow
Auxiliary
supply
240 V AC
Selectable
Connection output
4 wire
0/4 - 20 mA
Dimensions
Hole
H x W x D (mm) dia. (mm)
135 x 92 x 56
35
Cat. No.
HT35A 240 V AC
Price $
670.00
110 V AC
4 wire
135 x 92 x 56
HT35A 110 V AC
670.00
0/4 - 20 mA
35
TT35A
Primary current range 0 - 1000 A DC unidirectional current flow
Auxiliary
supply
240 V AC
Selectable
Connection output
4 wire
0/4 - 20 mA
Dimensions
Hole
H x W x D (mm) dia. (mm)
182 x 125 x 56
80
Cat. No.
HT80A 240 V AC
Price $
830.00
110 V AC
4 wire
182 x 125 x 56
HT80A 110 V AC
830.00
0/4 - 20 mA
80
Connection diagrams
2 wire technology
HT80A
Measuring
device
4 wire technology
Measuring
device
9
Price Schedule
‘Y8’
Notes:
) DC Auxiliary supply voltages 24, 48, 110 V DC are available on indent.
1
For further information please contact Sales 1300 NHP NHP or visit nhp.com.au
GST not included
9 - 43
Darwin
Cairns
Townsville
11
13
12
Rockhampton
14
15
Toowoomba
9
Perth
7
10
Adelaide
NHP Branch Offices
NHP Resident Sales Staff
19
6
22
Brisbane
16
21
23 20
Newcastle
Canberra
Sydney
Albury
Wollongong
18
2
8
4
1
Melbourne
Auckland
3
5
Hamilton
Laverton
Dandenong
New Plymouth
Launceston
17
24
Napier
Wellington
Hobart
Christchurch
Dunedin
Australian Branches
Victoria
Richmond
Laverton
Dandenong
Albury / Wodonga
Tasmania
Hobart
Launceston
New South Wales
Sydney
Newcastle
Canberra
Wollongong
Western Australia
Perth
Northern Territory
Darwin
Queensland
Brisbane
Townsville
Rockhampton
Toowoomba
Cairns
South Australia
Adelaide
New Zealand Branches
North Island
Auckland
Hamilton
Napier
Wellington
New Plymouth
34
South Island
Christchurch
Dunedin
Australian Regional Representation
1
2
3
4
5
6
7
8
9
10
11
12
Ballarat
Bendigo
Geelong
Shepparton
Gippsland
Mildura
Whyalla
Mt Gambier
Kalgoorlie
Bunbury
Karratha
Port Hedland
13
14
15
16
17
18
19
20
21
22
23
Mackay
Gladstone
Sunshine Coast
Gold Coast
Griffith
Wagga Wagga
Dubbo
Gosford
Coffs Harbour
Tamworth
Lithgow
New Zealand Regional Representation
24 Bay of Plenty
AUSTRALIA
nhp.com.au
SALES 1300 NHP NHP
VICTORIA
Melbourne
43-67 River Street
Richmond
VIC 3121
Tel +61 3 9429 2999
Laverton
104-106
William Angliss Drive
Laverton North
VIC 3026
Tel +61 3 9368 2901
Albury / Wodonga
847 Ramsden Drive
Albury
NSW 2640
Tel +61 2 6049 0600
Dandenong
40-42 Cyber Loop
Dandenong South
VIC 3175
Tel +61 3 8773 6400
TASMANIA
Hobart
29B Lampton Avenue
Derwent Park
TAS 7009
Tel +61 3 6228 9575
Launceston
Unit 3
13-17 Merino Street
Kings Meadows
TAS 7249
Tel +61 3 6345 2600
NEW SOUTH WALES
QUEENSLAND
Sydney
30-34 Day Street North
Silverwater
NSW 2128
Tel +61 2 9748 3444
Brisbane
16 Riverview Place
Murarrie
QLD 4172
Tel +61 7 3909 4999
Newcastle
575 Maitland Road
Mayfield West
NSW 2304
Tel +61 2 4960 2220
Wollongong
34 Industrial Road
Unanderra
NSW 2526
Tel +61 2 4272 5763
ACT
Canberra
Unit 1
187 Gladstone Street
Fyshwick
ACT 2609
Tel +61 2 6280 9888
WESTERN AUSTRALIA
Perth
38 Belmont Ave
Rivervale
WA 6103
Tel +61 8 9277 1777
NORTHERN
TERRITORY
Darwin
3 Steele Street
Winnellie
NT 0820
Tel +61 8 8947 2666
Townsville
5 Leyland Street
Garbutt
QLD 4814
Tel +61 7 4779 0700
Rockhampton
1 Lawson Street
Parkhurst
QLD 4702
Tel +61 7 4927 2277
Toowoomba
Cnr Carroll Street and
Struan Court
QLD 4350
Tel +61 7 4634 4799
Cairns
Unit 2
1 Bramp Close
Portsmith
QLD 4870
Tel +61 7 4035 6888
SOUTH AUSTRALIA
Adelaide
36-38 Croydon Road
Keswick
SA 5035
Tel +61 8 8297 9055
NHP Electrical Engineering Products Pty Ltd
A.B.N. 84 004 304 812
NPLISTBC © Copyright NHP 2013
Cert no. XXX-XXX-XXX X
NEW ZEALAND
nhp-nz.com
SALES 0800 NHP NHP
PO Box 62-009
Sylvia Park
Auckland 1644
New Zealand
Auckland
118a Carbine Road
Mt Wellington 1060
Tel +64 9 276 1967
Hamilton
78 Rostrevor Street
Hamilton 3204
Tel +64 7 849 0257
Napier
126 Taradale Road
Onekawa 4110
Tel +64 6 843 6928
New Plymouth
2 Dean Place
Waiwhakaiho 4312
Tel 0800 NHP NHP
Wellington
52 Victoria Street
Lower Hutt 5010
Tel +64 4 570 0634
Christchurch
27 Iversen Terrace
Waltham 8011
Tel +64 3 377 4407
Dunedin
30 Fox Street
South Dunedin 9012
Tel 0800 NHP NHP
Please scan
the QR code to
download this
document.