APPENDIX A
LOBBY
MasterColor CDM 70W/830 Med ED17 CL ALTO
PRODUCT DATA
Product Number
208843
Full product name
MasterColor CDM 70W/830 Med ED17 CL ALTO
Ordering Code
MHC70/U/M/3K ALTO
Pack type
1 Sleeve Open End
Pieces per pack
1
Packs per case
12
Pack UPC
046677208844
EAN2US
-
Case Bar Code
50046677208849
Successor Product number
-
Wattage[W ]
70W
Color Code
830 [CCT of 3000K]
Base
Med [Medium]
Bulb
ED17 [Diameter: 2.125 inch]
Bulb Finish
CL [Clear]
Feature
ALTO [ALTO®]
Base Information
Brass[Brass Base]
Bulb Material
Hard Glass
Operating Position
Universal[Universal]
Packing Type
1SL[1 Sleeve Open End]
Packing Configuration
12
Rated Avg. Life[hr ]
16000
Mercury Weight[mg ]
6.95
ANSI Code HID
M143/M98/E
Lamp Voltage[V ]
100
Color Rendering Index[Ra8 ]
85
Color Designation
Warm White
Color Temperature[K ]
3000
Initial Lumens[Lm ]
6200
Design Mean Lumens[Lm ]
4585
Light Center Length L [inch][in ]
3.438
Max Overall Length (MOL) - C[in ]
5.438
Diameter D[in ]
2.125
©2004-2005 Koninklijke Philips Electronics N.V. All rights reserved. Privacy policy
Philips. Access to and use of this Web Site is subject to these Terms of use.
TYPE: D1
Custom Made Starburst Fixture
Description: Housing Made of Diffuse Acrylic (yellow or orange); Acrylic Lens; Mounting made
of brushed aluminum
Voltage:
277V
Ballast:
Integral Electronic Ballast
Lamp: 70W Metal Halide
Base: ED-17
Made in USA
Source Four® HID PAR
ETC, Inc.
HID Series
TYPE: T7
PAR-EA-C
S P E C I F I C AT I O N S
High intensity discharge open reflector lighting fixture
PHYSICAL
ELECTRICAL
LAMP
LENSES
OPTICAL
Yoke mounted electronic ballast
Die-cast aluminum
Tool free access to the reflector and lens
High-impact, thermally insulated knobs
Sealed reflector housing
Reflector temperature control through integral
heat sink fins
Gel frame holders with two accessory slots
Top-mounted, gel-frame retainer
Steel yoke with two mounting positions
Positive locking yoke clutch
UL and cUL LISTED
150W electronic ballast (yoke mounted)
<14 Amps inrush current
<10% Harmonic distortion
>95% Power Factor
90% Ballast Efficiency
120 V Ballast:
120V±10%, 60Hz
1.5 Amps operating current
277 V Ballast:
277V±10%, 60Hz
0.61 Amps operating current
150W Ceramic metal halide
ETC Source Four HID is shipped with a 150W
Philips MasterColor™ CDM
3000°K color temperature
9000 hrs. lamp life
CRI-85
Optional 150W Philips MasterColor™ CDM
4,000°K color temperature lamp available
Four heat resistant, molded borosilicate glass
lenses supplied with each unit: Very Narrow Spot
(VNSP), Narrow Spot (NSP), Medium Flood (MFL)
and Wide Flood (WFL).
Round beam for VNSP and NSP, oblong beam
shape for MFL and WFL
Tool free lens changing
Thermally insulated lens ring
Modified parabolic and multifaceted reflector
Computer designed reflector facets molded
directly into heat sink casting, finished with an
enhanced aluminum deposition process, and
polished for maximum reflectance
O R D E R I N G I N F O R M AT I O N
Source Four HID PAR
Model#
PAR-EA
PAR-EA-1
Description
Source Four HID PAR Enhanced Aluminum (Black)
Source Four HID PAR Enhanced Aluminum (White)
Note: ETC Source Four HID PAR are supplied with Philips CDM master color 150W
ceramic metal halide lamp, color frame and 6' (1.8 meter) leads as standard
Connector Designation
Use suffixes below to specify factory-fitted connector type
Suffix
Description
A
B
C
D
Parallel-blade U-ground connector (120V only)
Two-pin and ground, 20 amp connector (120V only)
Grounded, 20 amp, twistlock connector (120V only)
Twistlock NEMA L7-20P (277V only)
Source Four HID PAR Accessories
Model#
407CF
400SC
400CC
400–VNSP
400–NSP
400–MFL
400–WFL
400–LS4
400PTH3
400PTH6
400PHH
400XBTH
400PGE3
400PGE6
400BD
400L
400WB
Description
Color frame (7.5”) (included)
Safety Cable
C-clamp
Very Narrow Spot lens
Narrow Spot lens
Medium Flood lens
Wide Flood lens
Set of four Source Four PAR lenses (VNSP, NSP, MFL, WFL)
Top hat, 3”
Top hat, 6”
Half hat
Cross baffle top hat
Gel extender, 3”
Gel extender, 6”
Barn door
Egg crate louver
Weighted base
Note: For colors other than black or white, please call ETC
P H O T O M E T R I C D ATA
Very Narrow Spot
35
50
65
80
Field Diameter (ft)
10.7
15.3
19.9
24.5
210000
Illumination (fc)
156
76
45
30
180000
17º
Candela
Candlepower Distribution Curve
Field Angle
7º
Beam Angle
Distance (ft)
150000
120000
90000
60000
30000
0
0
5
10
15
20
25
30
35
Degrees
For Field diameter at any distance, multiply distance by .31
For Beam diameter at any distance, multiply distance by .13
HID PAR
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
VNSP
191,178
3829
25.5LPW
28%
Narrow Spot
35
50
65
80
Field Diameter (ft)
11.3
16.2
21.1
25.9
210000
Illumination (fc)
142
70
41
27
180000
18º
Candela
Candlepower Distribution Curve
Field Angle
7º
Beam Angle
Distance (ft)
150000
120000
90000
60000
30000
0
0
5
10
15
20
25
30
35
Degrees
For Field diameter at any distance, multiply distance by .32
For Beam diameter at any distance, multiply distance by .13
HID PAR
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
NSP
174,320
3910
26.1LPW
29%
All photometric data in this document was prepared using standard production fixtures, and the Prometric™ CCD measurement system.
For illumination with any lamp, multiply the candlepower of a beam spread by the multiplying factor (mf) shown for that lamp.
To determine illumination in footcandles or lux at any throw distance, divide candlepower by distance squared.
Metric Conversions:
For Meters multiply feet by .3048
For Lux multiply footcandles by 10.76
Source Four® HID PAR
HID Series
Medium Flood
Illumination (fc)
45
55
11.9/20.7
15.4/26.7
18.8/32.7
210000
47
28
19
180000
93
13º/19º
27º/33º
Candlepower Distribution Curve
Candela
Field Diameter (ft) 8.5/14.8
35
Field Angle
25
Beam Angle
Distance (ft)
150000
120000
90000
60000
30000
0
0
5
10
15
20
25
30
35
Degrees
X axis
Y axis
For Field diameter at any distance, multiply distance by .49 /.59
For Beam diameter at any distance, multiply distance by .23 /.34
HID PAR
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
MFL
58,151
4601
30.7LPW
34%
Wide Flood
Illumination (fc)
30
35
14.9/23.9
17.8/28.6
20.1/33.4
210000
44
30
22
180000
68
16º/32º
33º/53º
Candlepower Distribution Curve
Candela
Field Diameter (ft) 11.9/19.1
25
Field Angle
20
Beam Angle
Distance (ft)
150000
120000
90000
60000
30000
0
0
5
10
15
20
25
30
35
Degrees
X axis
Y axis
For Field diameter at any distance, multiply distance by .59 /.95
For Beam diameter at any distance, multiply distance by .29 /.58
HID PAR
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
WFL
27,288
4333
28.9LPW
32%
All photometric data in this document was prepared using standard production fixtures, and the Prometric™ CCD measurement system.
For illumination with any lamp, multiply the candlepower of a beam spread by the multiplying factor (mf) shown for that lamp.
To determine illumination in footcandles or lux at any throw distance, divide candlepower by distance squared.
Metric Conversions:
For Meters multiply feet by .3048
For Lux multiply footcandles by 10.76
Source Four® HID PAR
HID Series
PHYSICAL
8"/203mm
5.75"
15cm
10.75"/27cm
11.75in"/298mm
8"/203mm
8.25"
20.9cm
10.25"
26cm
Ballast Dimensions
WEIGHTS
Source Four HID PAR Weights
Model
6.0"
17cm
HID PAR
Weight
lbs
10.4
Shipping Weight
kgs
4.7
lbs
15.6
kgs
7.1
*Add 2.3 lbs for C-clamp
2.1"
5.3cm
5.25"
13cm
Americas ■ 3030 Laura Lane, P.O. Box 620979, Middleton, WI 53562-0979 USA ■ Tel: +1 608 831 4116 ■ Fax: +1 608 836 1736 ■ Toll free: 800 688 4116 ■ Toll free fax: 800 555 8912
Europe ■ Unit 5, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK ■ Tel: +44 (0)20 8896 1000 ■ Fax: +44 (0)20 8896 2000
Asia ■ Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong ■ Tel: +852 2799 1220 ■ Fax: +852 2799 9325
Web: www.etcconnect.com ■ Email: (US) mail@etcconnect.com ■ (UK) mail@etceurope.com ■ (Asia) mail@etcasia.com
Source Four® products protected by U.S. Patent Numbers 5,268,613, 5,345,371, 5,544,029, 5,446,637 and 5,775,799; Japanese Patent Number 2,501,772; US and International Patents Pending.
Copyright © 2002 ETC, Inc. All Rights Reserved. All product information and specifications subject to change. 7061L1010 Rev. A Printed in USA 08/02
TYPE: T8
42122867
TYPE: Z2
CLS-6-NG-120
Metal
Halide
Lamp Ballast
Catalog Number 72C5282
For 70W
M98
60 Hz HX-HPF
Status: Active
DIMENSIONS AND DATA
10.50"
2.63"
CASE "F-1"
11.13"
3.19"
11.75"
Capacitor:
INPUT VOLTS
120 277
HX-HPF
CIRCUIT TYPE
90%
POWER FACTOR (min)
REGULATION
Line Volts
±5%
Lamp Watts
±10%
LINE CURRENT (Amps)
Operating...................................................
0.85 0.37
Open Circuit...............................................
1.60 0.75
Starting......................................................
1.25 0.55
UL TEMPERATURE RATINGS
Insulation Class
A (105°C)
Coil Temperature Code
1029
MIN. AMBIENT STARTING TEMP.
-20°F or -30°C
NOM. OPEN CIRCUIT VOLTAGE
255
INPUT VOLTAGE AT LAMP DROPOUT...........................
84 194
INPUT WATTS
94
RECOMMENDED FUSE (Amps).....................................
4
2
CORE and COIL
Dimension (A)
Dimension (B)
Weight (lbs.)
8.5
Lead Lengths
12"
CAPACITOR REQUIREMENT
Microfarads
Volts (min.)
Fault Current Withstand (amps)
60 Hz TEST PROCEDURES (Refer to Advance Test
Procedure for HID Ballasts - Form 1270)
High Potential Test (Volts)
1 minute
1600
2 seconds
2000
Open Circuit Voltage Test (Volts)
230-280
Short-Circuit Current Test (Amps)
Secondary Current
0.95-1.20
Input Current..............................................
0.55 0.25
0.85 0.40
-
-
-
Wiring Diagram:
All Lead Lengths 12"
277 V
The capacitor is included as
part of the potted assembly.
120V
COMMON
YELLOW/BLUE
BLACK
BALLAST
WHITE
RED
LAMP
GROUND CASE
F-Can Wiring Diagram
Ordering Information
Ignitor: IN CAN
Order Suffix
Description
The ignitor is included as
part of the potted assembly.
Ballast to Lamp Distance
(BTL) = 20 feet
Temp Rating: 90°C
Data is based upon tests performed by Advance Transformer in a controlled environment and representitive of relative performance.
Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ADVANCE TRANSFORMER CO.
O'HARE INTERNATIONAL CENTER · 10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Customer Support/Technical Service: Phone: 800-372-3331 · Fax: 630-307-3071
Corporate Offices: Phone: 800-322-2086
04/30/99
EXTREME SCREEN THEATER
DL23 - Glass Star
P RO DU C T S P EC IF IC ATIO N
RECESSED FIXED DOWNLIGHT
TYPE: B1
Cat. No.
Finish
DL23W
DL23B
DL23C
DL23G
Matte White
Matte Black
Polished Chrome
Polished Brass
DL23C-DGL-B
m
3.7"-94m
1.75"
45mm
Stem Button
Etched Glass
6
17.76"
2m
m
1.00"
25mm
11mm
12.25"-3
3.13"
80mm
DHX-3 HOUSING
for accessible ceilings
(Use DL23)
Clear Glass
1.70"
43mm
7.50"-191mm
4.5"-114mm
5.50"-140mm
1.25"-32mm
3.50"-89mm
5.88"-149mm
5.88"-149mm
1.25"
32mm
MOUNTING
Use DL23Z with DHT/ZF housing with integral electronic transformer (50w maximum)
in non-insulated, non-accessible ceilings. Use DL23 with DHX-3 housing with integral
magnetic or electronic transformer (50w maximum) in non-insulated, accessible ceilings
only. Distinguishing characteristic of DHX-3 housing is shallow construction, under 4
inches in depth. Hangar bars and brackets are included.
MATERIAL
Trim is constructed of steel with suspended borosilicate glass. Fixture housings are riveted
aluminum and welded.
LABEL
U.L. Listed trim and housings for dry and damp, non-IC locations. File No. E115025.
ACCESSORIES
Trim may be accessorized with up to two effects devices. Colored glass lense options
include: Blue (DGL-B), Green (DGL-G), Pink (DGL-P), Red (DGL-R), and Yellow (DGLY). Additional accessories include: Clear Glass Lens (CGL-1) and Spread Glass Lens
(SGL-1).
414 Live Oak Street
San Antonio, Texas 78202
Phone 210 227-7329
FAX 210 227-4967
www.luciferlighting.com
3.50"
89mm
DHT/ZF HOUSING
DL23 TRIM
GENERAL DESCRIPTION
Decorative low voltage recessed downlight with suspended, frosted glass star with clear
round glass center which is closed. Glass is retained in position by posts with chromed
buttons. Fixture may be re-lamped from room side without removal of trim from housing.
Uses a quartz halogen lamp for superior color rendition and beam control. Frosted glass
lens is supplied with fixture.
1.00"-25mm
for non-accessible ceilings
(Use DL23Z)
ELECTRICAL
Trim is pre-wired for use in housing assembly.
TRANSFORMER
DHT/ZF housing is supplied with 120v primary, 12v secondary integral electronic
transformer. DHX-3 housing is supplied with an integral 120v or 277v primary, 12v
secondary magnetic transformer or an integral 120v primary, 12v secondary electronic
transformer. All transformers are dimmable
LAMP
12v MR-16 halogen lamp, 50w maximum (order separately). Specify wattage and lamp
beam spread.
ENERGY CONSERVATION
Manufacturer recommends use of Osram Sylvania’s energy saving 37w Tru-Aim IR
halogen lamps which convert more energy into light than conventional 50w MR-16 lamps.
Tru-Aim IR halogen lamps can be ordered from Lucifer Lighting for use in fixture. See
luciferlighting.com for lamp specification guide.
®
®
WARRANTY
Manufacturer's one year warranty of product is conditioned on use of manufacturer
supplied transformers.
©2004 Lucifer Lighting Company
As part of its policy of continuous research and product development, the
Company reserves the right to change or withdraw specifications without
prior notice.
0960-1004
DELRAY
ROCKET I SPECULAR ALZAK OPEN HIGHBAY
T YPE:
LIGHTING
PROJECT:
TYPE: J1
INCORPORATED
ORDER NUMBER:
7714
Lamp Qty.
1, 2, 3
1, 2
1
1
1
Wattage
Ballast
Options
26-42 CF
UE, SS
D2, D4, D5, EM
57-70 CF
70,100MH MH1, MH2 Q1, Q2
150MH
INC150W
7714
1
85 QL
7714
COMPACT FLUORESCENT
Housing is .063 spun matte
anodized aluminum. Canopy
mounts to standard J-boxes; suspends from aircraft cables with
push button gliders; and supplied
with 6 foot power cord. Sockets
and ballasts operate 26, 32 and 42
watt triple tubes; voltage is 120
thru 277V. Separate switching
SS, dimming ballasts Dand emergency battery pack EM Voltage
must be specified. U.L. listed for
damp locations.
7714
fluorescent
METAL HALIDE/
INC ANDESCENT
Housing is .063 spun matte
anodized aluminum. Canopy
mounts to standard J-boxes;
suspends from aircraft cables
with push button gliders; and
supplied with 6 foot power cord.
Incandescent 150W max. Metal
halide ballasts are electronic, for
use with medium base, ceramic
arc tube lamps rated for open
fixtures. For quartz restrike, order
Q1for 120V and Q2 for 277V.
U.L. listed for damp locations.
7714
metal
halide
QL1 120V only
7714/EM
fluorescent
emergency
pack
7 714
Model#
7714
7714-1-150
12”
18.7”
18.7”
13.4”
13.4”
7714
incandescent
18.7”
18.7”
11916
13.4”
13.4”
VA L E R I O S T.
NORTH
QL INDUCTION
Housing is .063 spun matte
anodized aluminum. Canopy
mounts to standard J-boxes; suspends from aircraft cables with
push button gliders; and supplied
with 6 foot power cord. The HF
generator is electronic component
connected to a discharge vessel via
a shielded triaxial cable and supplied standard in 120V only for
the 85W lamp. U.L. listed for
damp locations.
7714
QL
induction
H O L LY W O O D ,
CALIFORNIA
91605
PHONE
18.7”
818 982 3701
FAX
13.4”
818 982 3715
OPEN HIGHBAY
7714332
OPEN HIGHBAY
OPEN HIGHBAY
77141100
7714342
BALL AST S
FLUORESCENT BALL AST S
UE Universal electronic
wattage: 26, 32 and 42
voltage: 120 thru 277
All UE and SS models have sockets
and ballasts that operate 26, 32 and
42 watt lamps.
SS Separate switching for 3 lamps
DIMMING NOTES:
CONE OF LIGHT
FC/0•
MTG. HT.
DIA.
FC/0•
MTG. HT.
DIA.
FC/0•
MTG. HT.
DIA.
4’
222
4.3
4’
296
4.3
4’
288
4.3
6’
99
6.4
6’
132
6.4
6’
128
6.4
8’
56
8.55
8’
74
8.55
8’
72
8.5
10’
36
10.6
10’
47
10.6
10’
46
10.6
12’
25
12.8
12’
33
12.8
12’
32
12.8
50% FC at edge
50% FC at edge
Due to different operating temperatures, please review number of lamps
that can be used per manufacturers
ballast before ordering dimming.
DIMMING BALL AST S
D3 Advance Mark X
wattage: 1,2or 3-26,32,42 or 1-57,70
voltage: 120 or 277
voltage must be specified
range: 5% - 100%
control wires: none
dimmers: standard incandescent
recommended Advance C500A
50% FC at edge
CP DISTRIBUTION
90°
90°
1000
60°
60°
1000
60°
2000
2000
2000
3000
3000
30°
30°
4000
D4 Lutron Tu-Wire
Scene control dimming
wattage: 1-32 , 2-32,
voltage: 120 only
range: 5% - 100%
control wires: none
dimmers: Lutron Grafik Eye,
Nova T, Diva, Skylark
90°
1000
3000
30°
4000
4000
5000
5000
5000
C O E F F I C I E N T S O F U T I L I Z AT I O N
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
70
68
65
63
60
58
56
54
52
49
46
70
66
63
60
57
54
52
49
47
45
40
70
65
61
58
54
52
49
47
44
42
37
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
69
66
64
62
59
57
55
53
53
48
45
69
65
62
59
56
53
51
48
48
44
39
69
64
60
56
53
50
48
46
46
41
36
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
76
73
70
68
65
63
60
58
56
53
49
76
71
68
65
61
58
56
53
51
51
43
NOTES
7714332
3-32 watt triple tube
G24q-3 socket
Total lumens-7200
Spacing criteria-1.0
7714342
3-42 watt triple tube
G24q-4 socket
Total lumens-9600
Spacing criteria-1.0
77141100
1-100 watt ED17
medium base socket
Total lumens-6800
Spacing criteria-1.0
76
70
66
62
58
55
53
50
47
47
40
D5 Advance Mark VII
wattage: 1,2or 3-26,32,42 or 1-57,70
voltage: 120 or 277
voltage must be specified
range: 5% - 100%
control wires: 2 low voltage
dimmers: 1-10V analog
METAL HALIDE BALL AST S
MH.1 120V electronic
MH.2 277V electronic
Metal Halide Ballasts are electronic,
square wave type for use with ceramic
arc tube, color corrected lamps rated
for open and enclosed fixtures.
C
O
L
E
L
I
G
H
T
I
N
G
Steplites
TYPE: W1
Series
Incan.
Fluor.
HID
Exterior
Interior
FeedThru
Other Options
Stainless steel front
Tamperproof screws
150
150 SERIES
T-150G-BLU-BLK
Description
The 150 Series of Steplites is a variety of models
suitable for various interior uses where the level
of light output is not a significant requirement.
The fixtures utilize low wattage, long-life
incandescent lamps which fulfill the lighting
requirement.
Features
The formed steel construction allows for finish
options and all fixtures feature an integral feedthru capability. The T150G models are available
with diffusers in several color selections.
The T150H provides
subtle illumination for
nitelite use.
The T150E is an
unobtrusive aisle light.
Applications
The T150H and T150E models are most suitable
as nitelites and aisle lights where a low light
level is required. Suitable applications include
patient rooms and theater aisles. The T150G
models may be used in these applications, as
well as being used at higher mounting heights
as indicator warning lights for limited-access
laboratories, X-ray rooms, etc. The T150G/PA
models meet the requirements of Pennsylvania
for indicator lights at fire extinguisher locations.
Custom
If your project demands a special fixture we
would be pleased to discuss the production of
modified standard fixtures or custom fixtures to
suit your specific conditions. For more information on our custom capabilities, please contact
your local Cole representative.
The T150G can be used
as an indicator or
warning light.
The T150G/PA models
meet Pennsylvania
code for fire extinguisher indicator
lights.
C. W. Cole & Company, Inc.
2560 N. Rosemead Boulevard
South El Monte, CA 91733-1593
Fax
(626) 443-9253
Tel.
(626) 443-2473
info@colelighting.com
www.colelighting.com
C
O
L
E
L
T150H
I
G
H
T
I
N
G
Steplites
T150E
150 SERIES
Specifications
T150G
Construction
• Faceplate is die-formed 20 gauge steel with
white polyester coating • T150H and T150E utilize
standard electrical junction boxes as housings
• T150G and T150G/PA have 18 gauge steel
housing with white epoxy coating • Faceplate is
gasketed for light leak • Diffuser is .125" acrylic
• Reflector is constructed of white die-formed
aluminum • ETL/cETL listed, suitable for installation
in any wall construction.
T150G/PA
Electrical
• Fixture is wired for one 7W C7 candelabra
base incandescent lamp (25W A19 medium base
for T150G/PA models) • Fixtures feature thruwire capability: T150H, 2 wires in, 2 wires out;
T150E, 3 wires in, 3 wires out; T150G, 3 wires
in, 3 wires out; T150G/PA, 3 wires in, 3 wires
out. Provided with two 1/2" conduit entrances
• T150G/PA models have long-life diode
prewired in circuit.
Catalog Numbers
Lamp
Mounting
Housing has holes for mounting.
Faceplate
Rectangular with louver
One 7W C7 candelabra base incandescent
Round with "eyelid", white diffuser
One 7W C7 candelabra base incandescent
Square with round red diffuser
One 7W C7 candelabra base incandescent
Square with round blue diffuser, PA code
One 25W A19 medium base incandescent*
Round with blue diffuser, PA code
One 25W A19 medium base incandescent*
* requires Osram/Sylvania lamp (3 15/16" M.O.L.)
T 150H
T 150E
T 150G
T 150G/PAS
T 150G/PAR
Options
How to Specify
Stainless Steel Faceplate: (except T150E)
To specify, add suffix -N.
Alternate Diffuser Color: White, red, blue, and green.
To specify, add suffix -WHT, -RED, -BLU, or -GRN.
Alternate Faceplate Color: Black or aluminum. To
specify, add suffix -BLK or -ALM.
1. Select catalog number with desired features.
2. Add suffixes for options required to meet job
conditions.
C. W. Cole & Company, Inc.
2560 N. Rosemead Boulevard
South El Monte, CA 91733-1593
Fax
(626) 443-9253
Tel.
(626) 443-2473
info@colelighting.com
www.colelighting.com
QB 3M G01
GADGETS
DELRAY
ROCKET II SPECULAR ALZAK OPEN HIGHBAY
TYPE: J2
T YPE:
LIGHTING
PROJECT:
INCORPORATED
ORDER NUMBER:
150
Wattage
26-42 CF
57-70 CF
70,100MH
150MH
INC150W
MH2
Ballast
UE, SS
7814
1
Lamp Qty.
1, 2, 3, 4
1,2
1
1
1
7814
1
85,165 QL
QL1, QL2
7814
COMPACT FLUORESCENT
Housing is .063 spun matte
anodized aluminum. Canopy
mounts to standard J-boxes; suspends from aircraft cables with
push button gliders; and supplied
with 6 foot power cord. Sockets
and ballasts operate 26, 32 and 42
watt triple tubes; voltage is 120
thru 277V. Separate switching
SS, dimming ballasts Dand emergency battery pack EM Voltage
must be specified. U.L. listed for
damp locations.
7814
fluorescent
METAL HALIDE/
INC ANDESCENT
Housing is .063 spun matte
anodized aluminum. Canopy
mounts to standard J-boxes; suspends from aircraft cables with
push button gliders; and supplied
with 6’ power cord. Incandescent
150W max. Metal halide ballasts are electronic, for use with
medium base, ceramic arc tube
lamps rated for open fixtures. For
quartz restrike, order Q1for 120V
and Q2 for 277V.
U.L. listed for damp locations.
7814
metal
halide
Q2
Options
D2, D4, D5, EM
MH1, MH2 Q1, Q2
7814/EM
fluorescent
emergency
pack
7 814
7814
Model#
7814
12”
20.2”
20.2”
17.4”
17.4”
7814
incandescent
20.2”
20.2”
11916
17.4”
17.4”
VA L E R I O S T.
NORTH
QL INDUCTION
Housing is .063 spun matte
anodized aluminum. Canopy
mounts to standard J-boxes; suspends from aircraft cables with
push button gliders; and supplied
with 6 foot power cord. The HF
generator is an electronic component connected to a discharge
vessel via a shielded triaxial cable.
Available in 120V only for the
85W lamp and 277V only for the
165W lamp. U.L. listed for damp
locations.
7814
QL
induction
H O L LY W O O D ,
CALIFORNIA
91605
PHONE
20.2”
818 982 3701
FAX
17.4”
818 982 3715
OPEN HIGHBAY
7814432
OPEN HIGHBAY
OPEN HIGHBAY
78141100
7814442
BALL AST S
FLUORESCENT BALL AST S
UE Universal electronic
wattage: 26, 32 and 42
voltage: 120 thru 277
All UE and SS models have sockets
and ballasts that operate 26, 32 and
42 watt lamps.
SS Separate switching for 3 or 4 lamp
fixtures.
DIMMING NOTES:
CONE OF LIGHT
FC/0•
MTG. HT.
DIA.
FC/0•
MTG. HT.
FC/0•
MTG. HT.
DIA.
DIA.
4’
546
3.1
4’
709
3.1
4’
331
3.9
6’
243
4.6
6’
315
4.6
6’
147
5.9
8’
136
6.1
8’
177
6.1
8’
83
7.8
10’
87
7.7
10’
113
7.7
10’
53
9.8
12’
61
9.2
12’
79
9.2
12’
37
11.7
50% FC at edge
Due to different operating temperatures, please review number of lamps
that can be used per manufacturers
ballast before ordering dimming.
DIMMING BALL AST S
D3 Advance Mark X
wattage: 1,2or 3-26,32,42 or 1-57,70
voltage: 120 or 277
voltage must be specified
range: 5% - 100%
control wires: none
dimmers: standard incandescent
recommended Advance C500A
50% FC at edge
50% FC at edge
CP DISTRIBUTION
90°
90°
1600
60°
30°
60°
1200
60°
3200
3200
2400
4800
4800
3600
30°
6400
D4 Lutron Tu-Wire
Scene control dimming
wattage: 1-32 , 2-32,
voltage: 120 only
range: 5% - 100%
control wires: none
dimmers: Lutron Grafik Eye,
Nova T, Diva, Skylark
90°
1600
30°
6400
8000
4800
8000
6000
C O E F F I C I E N T S O F U T I L I Z AT I O N
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
77
74
72
69
67
65
62
60
58
56
54
77
73
69
66
63
60
58
55
53
51
48
77
72
67
64
61
57
55
52
50
48
45
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
72
70
67
65
63
61
59
56
54
52
50
72
68
65
62
59
57
55
52
50
48
46
72
67
63
60
57
54
52
49
47
45
43
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
90
86
82
78
74
71
67
64
60
57
54
90
84
78
73
69
65
61
57
53
50
47
NOTES
7814432
4-32 watt triple tube
G24q-3 socket
Total lumens-9600
Spacing criteria-0.7
7814442
4-42 watt triple tube
G24q-4 socket
Total lumens-12800
Spacing criteria-0.7
78141100
1-100 watt ED17
medium base socket
Total lumens-6800
Spacing criteria-0.7
90
82
76
70
65
61
57
53
49
46
43
D5 Advance Mark VII
wattage: 1,2or 3-26,32,42 or 1-57,70
voltage: 120 or 277
voltage must be specified
range: 5% - 100%
control wires: 2 low voltage
dimmers: 1-10V analog
METAL HALIDE BALL AST S
MH.1 120V electronic
MH.2 277V electronic
Metal Halide Ballasts are electronic,
square wave type for use with ceramic
arc tube, color corrected lamps rated
for open and enclosed fixtures.
MasterColor CDM 150W/830 Med ED17 CO ALTO
| Save PDF | Open PDF
General
PRODUCT DATA
March 08, 2005
Product Number
130237
Full product name
MasterColor CDM 150W/830 Med ED17 CO ALTO
Ordering Code
MHC150/C/U/M/3K ALTO
Pack type
1 Sleeve Open End
Pieces per pack
1
Packs per case
12
Pack UPC
046677130237
EAN2US
-
Case Bar Code
50046677130232
Successor Product number
-
Wattage[W ]
150W
Color Code
830 [CCT of 3000K]
Base
Med [Medium]
Bulb
ED17 [Diameter: 2.125 inch]
Bulb Finish
CO [Coated]
Feature
ALTO [ALTO®]
Base Information
Brass[Brass Base]
Bulb Material
Hard Glass
Operating Position
Universal[Universal]
Packing Type
1SL[1 Sleeve Open End]
Packing Configuration
12
Rated Avg. Life[hr ]
10000
Mercury Weight[mg ]
15
ANSI Code HID
M142/M102/E
Lamp Voltage[V ]
95
Color Rendering Index[Ra8 ]
85
Color Designation
Warm White
Color Temperature[K ]
3000
Initial Lumens[Lm ]
12500
Design Mean Lumens[Lm ]
9375
Light Center Length L [inch][in ]
3.348
Max Overall Length (MOL) - C[in ]
5.438
Diameter D[in ]
2.125
Page 1 of 2
Pulse Start MH Std 175W/635 Mog ED28 CL
PRODUCT DATA
Product Number
276626
Full product name
Pulse Start MH Std 175W/635 Mog ED28 CL
Ordering Code
MS175/BU/PS 12PK
Pack type
1 Sleeve Open End
Pieces per pack
1
Packs per case
12
Pack UPC
046677276621
EAN2US
-
Case Bar Code
50046677276626
Successor Product number
-
Wattage[W ]
175W
Color Code
635 [CCT of 3500K]
Base
Mog [Mogul]
Bulb
ED28 [Diameter: 3.5 inch]
Bulb Finish
CL [Clear]
System Description
Pulse Start
Base Information
Nic/Brass[Nickel/Brass Base]
Bulb Material
Hard Glass
Operating Position
Base Up +/-15D[Base Up +/-15D]
Packing Type
1SL[1 Sleeve Open End]
Packing Configuration
12
Rated Avg. Life[hr ]
15000
Mercury Weight[mg ]
30.6
ANSI Code HID
M152/M137/E
Lamp Voltage[V ]
132
Color Rendering Index[Ra8 ]
62
Color Designation
White
Color Temperature[K ]
3700
Initial Lumens[Lm ]
16000
Design Mean Lumens[Lm ]
11200
Light Center Length L [inch][in ]
5
Max Overall Length (MOL) - C[in ]
8.313
Diameter D[in ]
3.5
©2004-2005 Koninklijke Philips Electronics N.V. All rights reserved. Privacy policy
Philips. Access to and use of this Web Site is subject to these Terms of use.
ARDEE LIGHTING, INC.
TYPE: K1
TYPE:
CATALOG NUMBER:
CLK-F-B-C-02-F-S-I-C-2-5
CLIKSTRIP – CLK SERIES
LOW VOLTAGE LINEAR LIGHTING FIXTURE
Clikstrip Low Profile
Tape Mounted
5 Watts Max.
Clikstrip Low Profile
Clip Mounted
6 Watts Max.
Clikstrip High Profile
Tape Mounted
6 Watts Max.
Clikstrip High Profile
Clip Mounted
10 Watts Max.
SPECIFICATIONS:
1)
Power Feed:
a)
b)
c)
2)
UL and cUL Listed for use with Class I supply
wiring
25 ampere maximum load at 12 volts
AC or 24 volts AC.
Provided with 2 opposing ½” pry-outs, located
for supply wire access
b)
5)
Compliances:
a)
b)
Lamp Strip:
a)
UL recognized component, thermoplastic,
polyethersulfone (PES), RTI=180 C, white or
black
6)
Buss Bars:
a)
b)
4)
8 AWG., hard drawn, solid copper alloy
Rated to carry 25 amperes at 12 volts AC
Or 24 volts AC
UL and cUL listed as low voltage lighting system,
suitable for use in damp locations and for Class I
wiring applications
Rated for loading up to 25 amperes maximum at
12 volts AC or 24 volts AC
Lamping:
a)
b)
3)
Brite nickel (chrome) or gold plated
Integral festoon style lamp, continuous end to
end, alternate, or custom spacing configurations.
Halogen lampholder inserts, for bi-pin halogen
lamps, shall fit into standard festoon lamp spacing,
or fit into 2.5” clip spacing, depending on
configuration or insert. Refer to insert
specifications.
Lamp Clips:
a)
Precision die-formed and treated spring steel
ARDEE LIGHTING INC.
A Subsidiary of JJI Lighting Group, Inc.
PO Box 1769, 639 Washburn Switch Rd.
Shelby, NC 28151
(704) 482-2811 ¦ Fax (800) 275-1544
www.ardeelighting.com
e-mail: ardee@jjishelby.com
022165
11/8/2004
Clikstrip
Product series specification
CLK
X
X
X
XX
X
X
–
X
X
X
X
–
XX
2.25 "
57 mm
1.88 "
47.8 mm
1.38 "
35 mm
FESTOON LAMPS
CENTER TO CENTER
0.63 "
16 mm
.56 "
14.2 mm
0.81"
20.6 mm
W=1.44"/36.6 mm
CLK Series Clikstrip bears the UL/C damp location
mark and is listed for Class I installations by
Underwriters Laboratories when used with approved
transformers and proper secondary fusing. A
specialized mini junction box with 1/2" knockouts allows
for connection to conduit or romex. Damp locations
require gold clips and festoon lamps only. See Table A,
page 31 for available lengths.
1.75"
44.5 mm
LOOPED LAMPS
CENTER TO CENTER
0.81 "
20.6 mm
.92 "
23.4 mm
0.81"
20.6 mm
UL/C Listed, j-box with 1/2" knockouts
CRK
X
X
X
XX
X
2.25 "
57 mm
X
1.88 "
47.8 mm
–
X
FESTOON LAMPS
CENTER TO CENTER
X
X
0.60 "
16 mm
X
XX
.56 "
14.2 mm
0.82 "
21 mm
0.81"
20.6 mm
W=1.44"/36.6 mm
CRK Series Clikstrip bears the UL/C damp location
mark and is listed for Class I installations by
Underwriters Laboratories when used with approved
transformers and proper secondary fusing. CRK Series
Clikstrip features a low profile junction box with integral
romex connector. Damp locations require gold clips and
festoon lamps only. See Table A, page 31 for
available lengths.
1.75"
44.5 mm
LOOPED LAMPS
CENTER TO CENTER
0.83 "
21 mm
.92 "
23.4 mm
0.81"
20.6 mm
UL/C Listed, j-box with romex fitting
CXK
X
X
1.2 "
30 mm
X
XX
X
1.88 "
47.8 mm
X
–
FESTOON LAMPS
CENTER TO CENTER
X
X
0.60 "
16 mm
0.82 "
21 mm
CXK Series is UL/C listed for damp locations. The Micro
junction box provides a compact and safe connection
for Class II wiring installations. Class II wiring limits
secondary wattages to 60 watts. See Table D, page 34
for available lengths.
–
X
X
–
XX
.56 "
14.2 mm
0.81"
20.6 mm
W=1.44"/36.6 mm
1.75"
44.5 mm
LOOPED LAMPS
CENTER TO CENTER
0.83 "
21 mm
.92 "
23.4 mm
0.81"
20.6 mm
UL/C Listed, Class II j-box
6
Clikstrip
Lamps
Festoon lamps
Color enhanced festoon lamps
12 VOLT INCANDESCENT 2450º K 10,000 HOURS
IC23
3 watt 12 volt clear 20 lumens
IF23
3 watt 12 volt frosted 18 lumens
IC25
5 watt 12 volt clear 37 lumens
IF25
5 watt 12 volt frosted 30 lumens
IC21
10 watt 12 volt clear 63 lumens
IF21
10 watt 12 volt frosted 50 lumens
24 VOLT INCANDESCENT 2450º K 10,000 HOURS
IC43
3 watt 24 volt clear 20 lumens
IF43
3 watt 24 volt frosted 18 lumens
IC45
5 watt 24 volt clear 37 lumens
IF45
5 watt 24 volt frosted 30 lumens
IC41
10 watt 24 volt clear 63 lumens
IF41
10 watt 24 volt frosted 50 lumens
12 VOLT XENON 2800º K 10,000 HOURS
XC23
3 watt 12 volt clear 26 lumens
XF23
3 watt 12 volt frosted 24 lumens
XC25
5 watt 12 volt clear 46 lumens
XF25
5 watt 12 volt frosted 40 lumens
XC26
6 watt 12 volt clear 50 lumens
XF26
6 watt 12 volt frosted 45 lumens
XC21
10 watt 12 volt clear 102 lumens
XF21
10 watt 12 volt frosted 90 lumens
24 VOLT XENON 2800º K 10,000 HOURS
XC43
3 watt 24 volt clear 26 lumens
XF43
3 watt 24 volt frosted 24 lumens
XC45
5 watt 24 volt clear 46 lumens
XF45
5 watt 24 volt frosted 40 lumens
XC46
6 watt 24 volt clear 50 lumens
XF46
6 watt 24 volt frosted 45 lumens
XC41
10 watt 24 volt clear 102 lumens
XF41
10 watt 24 volt frosted 90 lumens
12 VOLT ARGON 2950º K 3,000 HOURS
AC26
6 watt 12 volt clear 50 lumens
AF26
6 watt 12 volt frosted 45 lumens
24 VOLT ARGON 2950º K 3,000 HOURS
AC46
6 watt 24 volt clear 50 lumens
AF46
6 watt 24 volt frosted 45 lumens
24 VOLT SOLAR BLUE 4100º K 10,000 HOURS
XW45
5 watt 24 volt solar blue 30 lumens
12 VOLT INCANDESCENT 10,000 HOURS
IR23
3 watt 12 volt red 18 lumens
IY23
3 watt 12 volt yellow 18 lumens
IG23
3 watt 12 volt green 16 lumens
IB23
3 watt 12 volt blue 16 lumens
IR25
5 watt 12 volt red 33 lumens
IY25
5 watt 12 volt yellow 33 lumens
IG25
5 watt 12 volt green 30 lumens
IB25
5 watt 12 volt blue 30 lumens
24 VOLT INCANDESCENT 10,000 HOURS
IR43
3 watt 24 volt red 18 lumens
IY43
3 watt 24 volt yellow 18 lumens
IG43
3 watt 24 volt green 16 lumens
IB43
3 watt 24 volt blue 16 lumens
IR45
5 watt 24 volt red 33 lumens
IY45
5 watt 24 volt yellow 33 lumens
IG45
5 watt 24 volt green 30 lumens
IB45
5 watt 24 volt blue 30 lumens
Looped lamps
12 VOLT XENON 2800º K
LC25
5 watt 12 volt
LF25
5 watt 12 volt
LC21
10 watt 12 volt
LF21
10 watt 12 volt
24 VOLT XENON 2800º K
LC45
5 watt 24 volt
LF45
5 watt 24 volt
LC41
10 watt 24 volt
LF41
10 watt 24 volt
20,000 HOURS
clear 50 lumens
frosted 45 lumens
clear 105 lumens
frosted 95 lumens
20,000 HOURS
clear 50 lumens
frosted 45 lumens
clear 105 lumens
frosted 95 lumens
11
P reliminary Specification
THEMED ARCHITECTURAL LIGHTING
Catalog
Numbers
IQ38C
IQ38I
TYPE: T1
Fixture Type: IQ38C-277-70-B
Altman IQseries™ PAR38 lighting units are small, very efficient
means of illuminating and highlighting areas and objects
with soft edged-pools of light.
This attractive luminaire utilizes any number of 39- or
70-watt ceramic-discharge metal halide PAR38 lamps
as well as incandescent PAR38 lamps. The low-heat,
ruggedly handsome IQ38 will accentuate the décor and
function of any architectural venue.
IQ38I pictured
Specifications subject to change without notice.
2 5 0 WAT T
ARCHITECTURAL IQ38I
Spot/Floodlight Series
Features
3 9 o r 7 0 WAT T
ARCHITECTURAL IQ38C CDM
Spot/Floodlight Series
Features
• Compact Rugged spun extruded aluminum and ultra Hi-Temp and
ultra lightweight plastic construction
• Medium screw base socket
• Dual swivel positioning system with degree markings
• Internal accessory holder accepts wide variety of options
• U.L. and c.U.L. pending
• Made in the USA
• Utilizes 10,000 hour CDM Par38 or Par30 lamp
• Compact rugged extruded aluminum and ultra Hi-Temp
and ultra lightweight plastic construction
• Low noise, high efficient, Aromat electronic ballast
• Dual swivel positioning system with degree markings
• Track adapter versions available
• Internal accessory adapter
• U.L. and c.U.L. pending
• Made in the USA
63/4"
(15.9cm)
51/2"
(14.0cm)
IQ38I
31/2"
(8.9cm)
51/4"
(13.3cm)
61/8"
(15.6cm)
61/2"
(16.5cm)
IQ38C
6"
(15.2cm)
67/8"
(17.5cm)
1
9 /2 "
(24.1cm)
1
5 /4 "
(13.3cm)
1
6 /8 "
(15.6cm)
7
6 /8 "
(17.5cm)
Architectural
Peak Beam Footcandles
PAR38
640
160
71
Catalog Number
IQ38C
IQ38I
SPOT/FLOODLIGHT SERIES
40
20
IQ38C Ceramic Metal Halide Version
Model
2.7
5.4
8.0
10.7
13.5
Wattage
IQ38C–
Part Number
Diameter
Feet
Voltage
–
Color
–
110
Black
39
(W)hite
IQ38C w/CDM70/Par38/FL/3K
Distance Feet
5
10
15
20
240
70
(S)ilver
277
100
(X)custom
25
Conversion Factors for CDM
39 Watt Lamp = f.c. x .30
Peak Beam Footcandles
1120
280
124
70
35
1.3
2.6
3.9
5.2
6.5
Lux: = f.c. x.0929
IQ38I Incandescent Version
Model
Diameter
Feet
Part Number
Color
IQ38I–
Black
(W)hite
IQ38C w/CDM70/Par38/SP/3K
Distance Feet
5
10
15
20
(S)ilver
25
(X)custom
Footcandles
142
63
36
23
6.3
95
12.6
15.8
Dia. ft.
––
IQ38I with 250 KR38/SP
Distance Feet
10
15
20
25
Footcandles
61
27
15
10
11.5
17.3
23.1
28.9
10
15
20
25
A D D I T I O N A L
A C C E S S O R I E S
A C C E S S O R I E S
Supplied with Luminaire
38-CH
38-SCH
38-BD4
38-CP
38-LV
38-DF
TLA-E166*
TLA-TEK68*
TLA-XTSA66*
54-SVT183-24CC
Accessory Retainer
510-M
510
––
Dia. ft.
Cylindrical Hood
Sparkle Cylindrical Hood
4 Leaf Barn Door
Color Filter Holder
Louver Honeycomb
Dichroic Color Filter (specify color)
Nordic Eco 1 Circuit
Nordic Spec Grade 2 Circuit
Nordic Spec Grade 3 Circuit
Coiled Cord with Edison Connector
Factory Installed
Baby Pipe Clamp
Malleable Iron Pipe Clamp
Canopy, Unistrut, and Stem Mounting options aailable
IQ38I with 250 KR38/FL
Distance Feet
LAMP DATA FOR IQ38C (Ceramic Metal Halide)
Specifications
Lamp
Type
Housing: Compact rugged sheet metal.
Materials: Corrosion-resistant materials and hardware.
Yoke: 1" x 3/32" 13 gauge steel yoke.
Socket: 5kv pulse rated medium screw.
IQ38C Only:
Rating: 120V operation, 50/60Hz, 0.38 amps with 39W lamp and
39W ballast; .58 amps with 70W lamp and 70W ballast; 240 VAC
and 277 VAC operation available.
Ballast: Aromat Corp. 39W and 70W NAIS DCP Electronic Ballasts.
Units carry a full 5 year warranty tested and approved by Aromat.
CDM
CDM
CDM
CDM
CDM
CDM
CDM
CDM
CDM
CDM
CDM
Watts
35/PAR30L/M/SP
35/PAR30L/M/FL
70/PAR30L/M/SP
70/PAR30L/M/FL
70CPAR30L/M/FL
70CPAR38/SP/3K
70CPAR38/FL/3K
70CPAR38/WFL/3K
70CPAR38/SP/4K
70CPAR38/FL/4K
70CPAR38/WFL/4K
39
39
70
70
70
70
70
70
70
70
70
Efficiency
>69
>69
>68
>68
>69
>68
>68
>68
>60
>60
>60
LPW
LPW
LPW
LPW
LPW
LPW
LPW
LPW
LPW
LPW
LPW
Color
Temp
(°K )
Rated
Color
Life
Rated Rendering Burn
Position
(Hours) Lumens
Index
3000
3000
3000
3000
3000
3000
3000
3000
4000
4000
4000
9,000
9,000
9,000
9,000
10,000
10,000
10,000
10,000
10,000
10,000
2,000
2,200
4,850
4,850
4,850
4,800
4,800
4,800
4,200
4,200
4,200
81
81
82
82
82
82
82
92
92
92
92
Any
Any
Any
Any
Any
Any
Any
Any
Any
Any
Any
IQ38I Only:
Rating: 120/240 volts AC/DC operation 2.5/1.3 amps, 250 watts
maximum.
LAMP DATA FOR IQ38I (Incandescent)
Cable: 4 feet of insulated 3 conductor cable with u-ground male Edison
plug.
Manufacturer
Lamp Code
Watts
Candlepower
(Candela)
Color
Temp (°K)
Rated Life
(Hours)
Field Angle
(Degrees°)
Finish: Black epoxy Sandtex, electrostatic application. White and silver
also available.
120PAR/CAP/FL30°
120PAR/CAP/SP9°
250KR38/FL
250KR38/SP
Q250PAR38/FL
Q250PAR38/SP
120
120
250
250
250
250
4,600
22,500
6,100
14,200
6,500
28,000
2950
2950
2850
2850
2900
2900
3,000
3,000
4,000
4,000
6,000
6,000
30°
9°
60°
35°
60°
24°
Weight:
Approx; 5 lbs. (2.3 kg.) for IQ38I.
Approx; 7 lbs. (3.2 kg.) for IQ38C.
57 Alexander Street, Yonkers, NY 10701 Tel: 914.476.7987, 212.569.7777, Fax: 914.963.7304, Toll free: 800.4.ALTMAN or
Visit our website at http://www.altmanltg.com © 2003 Altman Stage Lighting Company, Inc.
Altman Lighting, Inc. is a subsidiary of Altman Stage Lighting Company, Inc.
120302
MasterColor CDM 70W/830 Med PAR38 SP CL
PRODUCT DATA
Product Number
222505
Full product name
MasterColor CDM 70W/830 Med PAR38 SP CL
Ordering Code
CDM70/PAR38/SP/3K ALTO
Pack type
1 Lamp in a Folding Carton
Pieces per pack
1
Packs per case
12
Pack UPC
046677222505
EAN2US
-
Case Bar Code
50046677222500
Successor Product number
-
Wattage[W ]
70W
Color Code
830 [CCT of 3000K]
Base
Med [Medium]
Bulb
PAR38 [PAR 38inch/121mm]
Beam Description
SP [Spot]
Bulb Finish
CL [Clear]
Operating Position
Universal[Universal]
Packing Type
1CT[1 Lamp in a Folding Carton]
Packing Configuration
12
Rated Avg. Life[hr ]
12500
System Power EL[W ]
82
Lamp Voltage[V ]
95
Beam Angle[D ]
15
Approx. MBCP[cd ]
12000
Color Rendering Index[Ra8 ]
83
Color Designation
Warm White
Color Description
830 Warm White
Color Temperature[K ]
3000
Initial Lumens[Lm ]
4100
Initial Lumens[Lm ]
4100
Overall Length C[mm ]
138.112
Diameter D[mm ]
-
THEMED ARCHITECTURAL
TYPE: T2
LIGHTING
Catalog Number
MF
Fixture Type:
MF 71
The Micro Flood is a lightweight soft-edged
spotlight designed to produce narrow to wide
beam spreads up to 15 feet away. The luminaire
utilizes the popular MR-16 family of dichroic
reflector lamps which are ideal for lighting floral
arrangements, window displays, and nightclubs.
The narrow to wide beam spreads are a result
of the type of MR-16 lamp that is selected.
Specifications subject to change without notice
4 3⁄ 4"
(12.1 cm)
8 1⁄ 2"
(22 cm)
20–75 WATT
MICRO FLOOD
MR-16
Features
• Die-cast aluminum components
6 1⁄ 2"
(17 cm)
• Attractive extruded aluminum housing
• Push-on type two-pin ceramic socket
• Dimmable 75W, 12V short circuit and thermal
protected electronic transformer
• Tool free lamp centering
2"
(5 cm)
4 1⁄ 4"
(11 cm)
3 1⁄ 2"
(9 cm)
• Adaptable to most track systems
• Color frame and safety cable with spring
clip included
• U.L., c.U.L and CE listed for 75 watts
• Made in the USA
20–75
WATT
MICRO
FLOOD
Catalog Number
MF
Specifications
Housing: Ribbed aluminum extrusion and die-cast aluminum
construction.
Peak Beam Footcandles
Materials: Construction employs corrosion-resistant materials
and SAE hardware. All handles are heat resistant phenolic.
Yoke: 1" x 1/8" aluminum yoke with clearance hole for
1
/2 inch bolt.
492
218
123
78
54
2
2.5
3.2
3.9
4.4
Distance Feet
5
7.5
10
12.5
15
Peak Beam Footcandles
84
37
21
13
9
4
5.6
8.5
10.7
12
5
7.5
10
12.5
15
EYF Lamp
Diameter
Feet
Socket: GX5.3, with heat shield.
Rating: 120 volts A/C operation, .625 amps, 75 watts
maximum (220–240 VAC, 50/60 Hz unit available).
Transformer: 75W, 12V dimmable electronic transformer.
Short circuit and thermal protected. Electronic internal resettable
protection. Patent pending auto heat regulation that also acts as
overload protection. Thermal auto-reset 125°c switch.
Cable: 6' total length with molded male edison plug (unless
track adapter specified).
Lamp Replacement: Lamp replacement performed
without the use of tools.
EYC Lamp
Diameter
Feet
Focusing: Adjustable with heat resistant knob on bottom
surface.
Distance Feet
Accessories: Accepts 3 1/4" dia. accessories.
Actual Photometrics Differ Slightly Among Lamp Manufacturers.
Finish: Black epoxy sandtex, electrostatic application.
Weight: Approx; 3 lbs. (1.4 kg.)
L A M P D ATA
A C C E S S O R I E S
Supplied with Luminaire
MCF
MAC-SC
Color Frame
Safety Cable 18”
Lamp
Type
Watts
EYF
EYJ
EYC
EXT
EXN
EZX
BAB
75
75
75
50
50
20
20
Volts
Rated
Life
(Hours)
Beam
Angle
(Degrees)
12
12
12
12
12
12
12
4000
4000
4000
5000
5000
4000
4000
14°
25°
42°
14°
40°
7°
40°
Field
Angle
(Degrees)
24°
35°
64°
24°
64°
12°
59°
Correction
Factor
1.00
1.00
1.00
.79
.79
.22
.22
A D D I T I O N A L
A C C E S S O R I E S
510-F
Pipe Clamp
MBD
TLA-J
TLA-H
TLA-L
TLA-E166
TLA-TEK67
TLA-XTSA66
4-way Barn Doors
Juno Track Adapter Installed
Halo Track Adapter Factory Installed
Lightolier Track Adapter Factory Installed
Nordic Eco 1 Circuit, Factory Installed
Nordic Spec Grade 2 Circuit, Factory Installed
Nordic Spec Grade 3 Circuit, Factory Installed
57 Alexander Street, Yonkers, NY 10701 Tel: 914.476.7987, 212.569.7777, Fax: 914.963.7304, Toll free: 800.4.ALTMAN or
Visit our website at http://www.altmanltg.com © 2003 Altman Stage Lighting Company, Inc.
Altman Lighting, Inc. is a subsidiary of Altman Stage Lighting Company, Inc.
111103
ConstantColor® Precise™ MR16 Item Detail
Subcategory
ConstantColor® Precise™ MR16
Product Code
20841
Description
Q71MR16/C/NFL25
Volts
12
Watts
71
Average Life in Hours
4000
CBCP
5500
Color Temperature (K)
3050
Bulb Type
MR16
Base Type
2-Pin GX5.3
Max Overall Length (In.)
1.875
Max Overall Length (mm)
48
Filament Type
C-6
Sales Unit UPC
043168208413
Case UPC
043168208413
SCC
00043168208413
Case Quantity
20
Additional Information
Narrow Flood
Footnotes
WARNING
- Keep combustible materials away from lamp
- Use in enclosed fixture rated for this product
- Use eye protection when handling lamp
- Use in enclosed fixture rated for this product
- Do not touch glass with bare hands
- Do not use lamp if outer glass is scratched or broken
CAUTION
- Allow lamp to cool before handling
-Turn power off before installing lamp
- Dispose of lamp in a closed container
- Do not use lamp if outer glass is scratched or broken
THEMED ARCHITECTURAL
LIGHTING
Catalog Number
IQ64C
TYPE: T3
Fixture Type: IQ64C-277-150-B
The IQ64 fixture is a compact, very efficient means of illuminating
and highlighting areas and objects with soft pools of light. The
largest of the IQ series Par fixtures, the IQ64 boasts all of the
admirable characteristics of its smaller companions such as
internal accessory holder, superior ventilation and dual swivel
positioning system with degree markings. Using the family of
sealed beam 150 watt long-life CDM PAR 64 lamps, this luminaire
is ideal for museums, retail and trade show applications.
Specifications subject to change without notice
IQ64C
ARCHITECTURAL IQ64C CDM
Spot/Floodlight Series
Features
•
•
•
•
Utilizes 8,000 hour CDM Par64 Lamp
Compact rugged spun and extruded aluminum construction
Low noise, high efficient, electronic ballast
Dual Swivel positioning system with degree markings
•
•
•
•
Track adapter versions available
Internal accessory adapter
U.L., c.U.L. and C.E. listed
Made in the U.S.A.
7 3/16"
(18.3 cm )
4 7/16"
(11.3 cm)
1.5"
(3.8 cm)
1 13/16"
(4.6 cm)
8 9/16"
(21.7 cm)
13 5/8"
(34.6 cm)
12 7/8"
(32.7 cm)
8 5/ 8"
(21.9 cm)
20
10
90
80
70
60
50
40
30
20
10
0
10
20
5 1/16"
(12.9 cm)
8 5/ 8"
(21.9 cm )
Architectural IQ64C
Catalog Number
IQ64C
Spot/Floodlight Series
Specifications
IQ64C Ceramic Metal Halide Version
Materials: Compact rugged sheet metal extruded and spun
aluminum.
model
Part Number:
Housing: Corrosion-resistant materials and hardware.
voltage
IQ64C –
Yoke: 1" x 3/32" 13 gauge steel yoke.
Socket: 5kv Mogul-end prong, tool-free relamping.
Ballast: Efficient electronic ballast. Tested and approved by
the manufacturer and carries a full 5-year warranty.
wattage
–
color
150
– (B)lack
110
(W)hite
240
(S)ilver
277
(X)Custom
A C C E S S O R I E S
Supplied with Luminaire
––
Rating: 120, 240 or 277 volts AC/DC operation, 50/60Hz,
1.25 amps with 150W lamp.
150 watts maximum.
Accessory Retainer for 7 7/16" Diameter Accessories
MSC
Mini Safety Cable
A D D I T I O N A L
A C C E S S O R I E S
Cable: 6' of insulated 3 conductor cable with u-ground male
Edison plug.
IQ64 -CH
IQ64-SCH
IQ64-BD4
IQ64-CF
IQ64-LV
IQ64-DCF
TLA-166*
TLA-TEK68*
TLA-XTSA66*
54-SVT183-24CC
Finish: Black TGIC Polyester, electrostatic application. White
and Silver are also available.
Weight: Approx; 8 lbs. (3.6 kg.)
Cylindrical Hood
Sparkle Cylindrical Hood
4 Leaf Barn Door
Color Filter Holder
Louver Honeycomb
Dichroic Color Filter (specify color)
Nordic Eco 1 Circuit
Nordic Sped Grade 2 Circuit
Nordic Spec Grade 3 Circuit
Coiled Cord with Edison Connector
Factory Installed
Baby Pipe Clamp
Malleable Iron Pipe Clamp
Canopy, Unistrut™ and Stem Mounting
Options Available
510-M
510
––
L A M P I N F O R M AT I O N
Rated Rated
Wattage Volts
150
150
150
150
150
150
95
95
95
100
100
100
Average
Rated Life Base
Product Description
CMH150/PAR64/830/GX16d/SP1/6
CMH150/PAR64/830/GX16d/MFL1/6
CMH150/PAR64/830/GX16d/WFL1/6
CMH150/PAR64/842/GX16d/SP1/6
CMH150/PAR64/842/GX16d/MFL1/6
CMH150/PAR64/842/GX16d/WFL1/6
8000
8000
8000
8000
8000
8000
GX16d
GX16d
GX16d
GX16d
GX16d
GX16d
MPBC
Lens
Style
Beam
15,400
47,000
16,000
154,000
47,000
16,000
Stipple
8-Bar
12-Bar
Stipple
8-Bar
12-Bar
Narrow
Medium
Wide
Narrow
Medium
Wide
100/0
CCT
50 0/0
MPBC Degrees K CRI
9x9
22x14
46x23
9x9
22x14
46x23
18x18
34x26
62x36
18x18
34x26
62x36
3000
3000
3000
4200
4200
4200
80+
80+
80+
90+
90+
90+
P H O T O M E T R I C D ATA F O R I Q 6 4 C
10'
20'
30'
40'
50'
60'
Beam
Field
Center
Angle
Angle
Beam H
Beam (Degrees) (Degrees) F.C.
Center
W Beam H
F.C.
Center
W Beam H
F.C.
Center
W Beam H
F.C.
W
Center
Beam H
F.C.
Center
W Beam H
F.C.
Distance
Product Description
CMH150/PAR64/830/GX16d/SP1/6
Narrow
9° x 9°
18° x 18° 1540
CMH150/PAR64/830/GX16d/MFL1/6 Medium 22° x 14° 34° x 26°
CMH150/PAR64/830/GX16d/WFL1/6
CMH150/PAR64/842/GX16d/SP1/6
Wide
Narrow
46° x 23° 62° x 36°
9° x 9°
Wide
1.6 1.6
385
3
3
171
5
5
96
6
6.3
62
8
8
43
9
9
3.9 2.5
118
8
5
52
12
7
29
16 9.8
19
19
12
13
23
15
24
160
8.5 4.1
40
17
8
18
25
12
10
34 16.3
6
42
20
4
51
18° x 18° 1540
1.6 1.6
385
3
3
171
5
5
96
6
6.3
62
8
8
43
9
9
470
3.9 2.5
118
8
5
52
12
7
29
16 9.8
19
19
12
13
23
15
470
8.5 4.1
40
17
8
18
25
12
10
34 16.3
6
42
20
4
51
24
CMH150/PAR64/842/GX16d/MFL1/6 Medium 22° x 14° 34° x 26°
CMH150/PAR64/842/GX16d/WFL1/6
470
W
46° x 23° 62° x 36°
57 Alexander Street, Yonkers, NY 10701 Tel: 914.476.7987, 212.569.7777, Fax: 914.963.7304, Toll free: 800.4.ALTMAN or
Visit our website at http://www.altmanlighting.com © 2004 Altman Stage Lighting Company, Inc.
Altman Lighting, Inc. is a subsidiary of Altman Stage Lighting Company, Inc.
052604
Quartzline® Halogen Item Detail
Subcategory
Quartzline® Halogen
Product Code
43499
Description
Q1000PAR64/WFL
Volts
120
Watts
1000
Average Life in Hours
4000
Lumens
19400
CBCP
33000
Color Temperature (K)
3000
Bulb Type
PAR64
Base Type
ExMogEndPr
Max Overall Length (In.)
6
Max Overall Length (mm)
153
Filament Type
CC-6
Sales Unit UPC
043168434997
Case UPC
043168434997
SCC
00043168434997
Case Quantity
6
Additional Information
Wide Flood
Footnotes
WARNING
- Keep combustible materials away from lamp
- Use in enclosed fixture rated for this product
- Avoid direct water/liquid contact
- Do not use lamp if outer glass is scratched or broken
- Use in enclosed fixture rated for this product
- Do not use lamp if outer glass is scratched or broken
- Do not exceed 110% of rated voltage
- Turn power off if glass bulb is broken. Remove and dispose of lamp.
CAUTION
- Allow lamp/fixture to cool before handling
- Do not use lamp if outer glass is scratched or broken
Note: This is a cut sheet for a 1000W lamp. A ratio was used to determine the lumens for a 150W lamp.
THEMED ARCHITECTURAL
LIGHTING
Catalog Number
ME
TYPE: T4
Fixture Type:
ME 50
The Micro Ellipse is a lightweight
framing spotlight with variable
focus ability. Beam angles range
approximately from 10˚ to 35˚ and
field angles from 25˚ to 50˚. Utilizing
the long life, low wattage and cost
efficient family of MR-16 dichroic
reflector lamps these lighting units are
ideal for architectural and display
applications. Included with each unit
are four steel framing shutters to
provide beam shaping capability.
Integral to the unit is a slot which will
accept the pattern holder, the optional
dual gobo rotator, or the optional
drop-in iris. This slot does have an
adjustable cover to prevent light leak.
Specifications subject to change without notice
20–75 WATT
MICRO ELLIPSE
MR-16
Features
• Die-cast aluminum components
• Attractive extruded aluminum housing
MSPIN Dual Image Rotator
(optional)
• Push-on type two-pin ceramic socket
• Dimmable 75W, 12V short circuit and
thermal protected electronic transformer
8 1⁄ 2"
• Tool free lamp centering
• Adaptable to most track systems
• Color fame & safety cable with spring clip
included
• U.L., c.U.L. and CE listed for 75 watts
• Made in the USA
6 1⁄ 2"
(17 cm)
(22 cm)
3 1⁄ 2"
(9 cm)
2 1⁄ 2"
(6 cm)
8 3⁄ 4"
(23 cm)
6 1 ⁄ 4"
(16 cm)
20–75
WATT
MICRO
ELLIPSE
Catalog Number
ME
MR-16
Peak Beam Footcandles
Specifications
Housing: Ribbed aluminum extrusion and die-cast aluminum
construction.
Narrow
Focus
Materials: Construction employs corrosion-resistant materials
and SAE hardware. All handles are heat resistant phenolic.
Yoke: 1" x 1/8" aluminum yoke with clearance hole for 1/2 inch bolt.
Distance Feet
Lens: Crown glass (white plate) lenses. Movable lenses mounted
on lens carriers with teflon glide bearing.
Peak Beam Footcandles
203
168
94
55
25
2
3.5
4.7
5.9
6.10
5
7.5
10
12.5
15
120
55
31
21
15
3.1
4.8
6.1
7.9
9.3
5
7.5
10
12.5
15
Diameter
Feet
Socket: GX5.3, with heat shield.
Rating: 120 volts A/C operation, .625 amps, 75 watts
maximum (220–240 VAC, 50/60 Hz unit available).
Medium
Focus
Transformer: 75W, 12V dimmable electronic transformer.
Short circuit and thermal protected. Electronic internal resettable
protection. Patent pending auto heat regulation that also acts as
overload protection. Thermal auto-reset 125°C switch.
Distance Feet
Cable: 6' total length with molded male edison plug (unless track
adapter specified).
Diameter
Feet
PHOTOMETRIC DATA FOR EYC LAMP
Actual Photometrics Differ Slightly Among Lamp Manufacturers
Shutters: Galvanized steel, fully adjustable and removable with
heat resistant handles.
L A M P D ATA
Focusing Lamp: Fully adjustable in 3 axis without tools, each
axis independent of the others.
Lamp
Type
EYJ
EYC
EXT
EXN
EZX
BAB
Focusing Fixture: Lens movements contained within body,
adjustable with heat resistant knob.
Accessories: Accepts beam reducing circle template, pattern
holder for glass/metal gobo and 3 3/8" dia. accessories. Pattern
slot shall be provided with a cover. Provision shall be made in the
pattern slot for gobo rotators.
Watts
75
75
50
50
20
20
Volts
12
12
12
12
12
12
Rated
Life
(Hours)
4000
4000
5000
5000
4000
4000
Correction
Factor
1.00
1.00
.79
.79
.22
.22
Finish: Black epoxy sandtex, electrostatic application.
Weight: Approx; 4.5 lbs. (2 kg.)
A D D I T I O N A L
A C C E S S O R I E S
A C C E S S O R I E S
SUPPLIED WITH LUMINAIRE
MCF
MAC-SC
Color Frame 3 3/8" x 3 3/8"
Safety Cable, 18"
510-M
Flat Steel Pipe Clamp
MBD
4-way Barn Doors
MEPH
Pattern Holder, 1 1/4" diameter opening
MECT
Beam Reducing Circle Template
MAPH-G
Pattern Holder, 1 1/4" Dia. Opening Accepts
Glass and Metal Patterns
MSPIN-110
MasterSpin Variable Speed Bi-Directional
Dual Gobo-Rotator, 120 VAC
MSPIN-220
MasterSpin Variable Speed Bi-Directional
Dual Gobo-Rotator, 220 VAC
MADii
Drop-in Iris
54-SVT183-24CC Coiled Cord w/Edison Connector, Factory Installed
TLA-J
Juno Track Adapter Installed
TLA-H
Halo Track Adapter installed
TLA-L
Lightolier Track Adapter installed
TLA-E166
Nordic Eco 1 Circuit, Factory Installed
TLA-TEK67
Nordic Spec Grade 2 Circuit, Factory Installed
TLA-XTSA66
Nordic Spec Grade 3 Circuit, Factory Installed
57 Alexander Street, Yonkers, NY 10701 Tel: 914.476.7987, 212.569.7777, Fax: 914.963.7304, Toll free: 800.4.ALTMAN or
Visit our website at http://www.altmanltg.com © 2003 Altman Stage Lighting Company, Inc.
Altman Lighting, Inc. is a subsidiary of Altman Stage Lighting Company, Inc.
111103
EXN 50W GU5.3 MR16 36D 1BL
General
+ Images
PRODUCT DATA
Product Number
392597
Full product name
EXN 50W GU5.3 MR16 36D 1BL
Ordering Code
BC50MRC16/FL36-EXN
Pack type
1 Blister
Pieces per pack
1
Packs per case
12
Pack UPC
046677392598
EAN2US
-
Case Bar Code
50046677392593
Successor Product number
-
ANSI Code Halogen
EXN
Wattage[W ]
50W
Base
GU5.3 [GU5.3]
Voltage[V ]
12V
Bulb
MR16 [MR 16inch/50mm]
Beam Angle[D ]
36D
Packing Type
1BL [1 Blister]
Execution
Closed
Operating Position
Universal[Universal]
Packing Configuration
12
Rated Avg. Life[hr ]
3000
Dimmable
Yes
Approx. MBCP[cd ]
-
Color Rendering Index[Ra8 ]
100
Color Temperature[K ]
3000
Overall Length C[mm ]
46
Diameter D[mm ]
50
+ Texts
Source Four® jr 36°
ELECTRONIC THEATRE CONTROLS
436J Series
TYPE: T5
436J-C
S P E C I F I C AT I O N S
O R D E R I N G I N F O R M AT I O N
Ellipsoidal lighting fixture
PHYSICAL Die cast aluminum construction
20 gauge stainless steel shutters in a bi-plane assembly
Interchangeable lens tubes with smooth–running
teflon guides provide six user-fit field angle options
High impact, thermally insulated knobs and
shutter handles
Two accessory slots, and a top mounted, gel
frame retainer
Steel yoke with two mounting positions
Positive locking, hand-operated yoke clutch
Slot for stainless steel patterns
Slot with sliding cover for motorized pattern devices
or optional iris
UL and cUL listed
ELECTRICAL 115-240V, 50/60Hz
High temperature 3–conductor 36" leads in a glass
fiber outer sleeve
Supports ETC Dimmer Doubling™ technology
LAMP
HPL — compact tungsten filament contained in a
krypton-filled quartz envelope (see table for suitable
lamp types)
575W Maximum
Integral die cast aluminum heat sink lamp base
OPTICAL
Precision molded borosilicate ellipsoidal reflector with
aspheric lens and multi-layer dichroic coating
Interchangeable lens mount assemblies allow userinstallation of different lens types
Reflector secured with anti-vibration shock mounts
Lens(es) secured with anti-vibration shock mounts
95% of visible light reflected through the optical train
90% of infrared radiation (heat) passes through
the reflector
Tool free lamp centering (X/Y) and peak/flat (Z)
adjustment knobs
Positive locking X, Y and Z adjustments, unaffected
by relamping
Interchangeable lens assembly kits permit selection of
26°, 36°, and 50° field angles, and 25°-50° zoom range
Source Four jr
Model#
Description
436J
36° Source Four jr (black)
436J-1
36° Source Four jr (white)
ETC Source Four jr are supplied with C-clamp, color frame
and 3' (96cm) leads as standard
Connector Designation
Use Suffixes below to specify Factory–Fitted Connector type
Model#
A
B
C
M
Description
Parallel-blade U-ground connector
Two-pin and ground, 20 amp connector
Grounded, 20 amp, twistlock connector
Dimmer Doubling™ Connector (NEMA L515P)
Source Four jr Accessories
Model#
Description
436JL
400SC
400CC
400JRS
400CF
400DN
400TH
400HH
400GE
400PH-M
Source Four jr 36° lens assembly
Safety cable
C–clamp (included)
Drop–in iris
Colorframe (6.25”) (included)
Donut (6.25”)
Top hat
Half hat
Gel Extender
Pattern holder (M size)
Note: For colors other than black and white, please call ETC.
4-8.1
Source Four® jr 36°
436J Series
PHOTOMETRIC
PHYSICAL
All photometric data in this document was prepared using standard production
fixtures, and the Prometric™ CCD measurement system. Fixtures were adjusted for
cosine distribution, and were tested with a calibrated HPL 575/115V 16,520 lumen
lamp at its rated voltage. All data were normalized to nominal lamp lumens.
20
25
30
Field Diameter (ft)
10.0
13.4
16.8
20.1
Illumination (fc)
169
95
61
42
37°
24°
Beam Angle
15
HPL
HPL
HPL
HPL
HPL
HPL
HPL
HPL
HPL
HPL
HPL
HPL
HPL
Field Angle
36°
Distance (ft)
Lamp code
575/115
575/115X
575/120
375/115
375/115X
550/77*
550/77X*
575/230
575/240
575/230X
575/240X
375/230X
375/240X
Initial Color Average
Watts Volts Lumens Temp. Rated Life MF
575
575
575
375
375
550
550
575
575
575
575
375
375
115
115
120
115
115
77
77
230
240
230
240
230
240
16,520
12,360
16,460
10,540
8,060
16,170
12,160
14,900
14,900
11,780
11,780
7,800
7,800
3,250˚
3,050˚
3,250˚
3,250˚
3,050˚
3,250˚
3,050˚
3,200˚
3,200˚
3,050˚
3,050˚
3,050˚
3,050˚
300
2000
300
300
1000
300
2000
300
300
1500
1500
1000
1000
1.00
0.76
1.00
0.63
0.49
1.00
0.76
0.87
0.87
0.70
0.74
0.47
0.47
*77V lamps are intended for use with the ETC Dimmer Doubler™.
Warning: Use of lamps other than HPL will void UL/cUL safety approval and
product warranty. Source Four jr is rated for 575W maximum.
For illumination with any lamp, multiply the candlepower of a beam spread by the
multiplying factor (mf) shown for that lamp.
To determine illumination in footcandles or lux at any throw distance, divide
candlepower by distance squared.
C TE
For Field diameter at any distance, multiply distance by .67
For Beam diameter at any distance, multiply distance by .43
12.75"/32.4cm
Metric Conversions: For Meters multiply feet by .3048
For Lux multiply footcandles by 10.76
8.75"/22cm
Candlepower Distribution Curve Cosine
40000
Candela
32000
24000
16000
6.9"
17.5cm
8000
19.2"/49cm
0
0
2
4
6
8
10
12
14
16
18
17.5"/44.5cm
20
Degrees
Source Four jr 36° (cosine)
Degree
Candlepower
Field Lumens
Efficacy
Efficiency
36°
38,000
6,539
11.4 LPW
39.6%
6.8"
17cm
9.6"
24cm
Source Four jr Weights
Model
36°
Fixture Weight*
lbs
10
kgs
4.5
Shipping Weight
lbs
16.5
kgs
7.5
* Add 2.3 lbs for C-clamp
Electronic Theatre Controls
International • 3030 Laura Lane, P.O. Box 620979, Middleton, WI 53562-0979 • Tel: (+1) 608 831 4116 • Fax: (+1) 608 836 1736 • Toll free: 800 688 4116 • Toll free fax: 800 555 8912
Europe • 5 Victoria Industrial Estate, Victoria Road, London W3 6UU • Tel: +44 (0)20 8896 1000 • Fax: +44 (0)20 8896 2000
Asia • Room 605-606, Tower III Enterprise Square • 9 Sheung Yuet Road, Kowloon Bay • Kowloon, Hong Kong • Tel: (+852) 2799 1220 • Fax: (+852) 2799 9325
Web: www.etcconnect.com • Email: mail@etcconnect.com Copyright © 2001 Electronic Theatre Controls, Inc., All Rights Reserved. All product information and specifications subject to change.
Source Four® products protected by U.S. Patent Numbers: 5,268,613, 5,345,371, 5,544,029 and 5,446,637, Japanese Patent Number: 2,501,772. US and International Patents Pending.
7062L1008
4-8.2
0601US • Rev. B
THEMED ARCHITECTURAL LIGHTING
Catalog
Number
IQ36
TYPE: T6
Fixture Type:
IQ36-110-B
The IQ36 is a compact specification-grade lighting fixture designed
for use with 12-volt PAR36 and AR-111 screw terminal lamps up
to 75 watts. This attractive fixture is a very efficient means of illuminating and highlighting areas or objects with narrow to
wide beam spreads. The IQ36 has tool-free lockable beam
rotation along with all of the admirable features of IQseries
fixtures, such as the internal accessory holder for up to
three accessories, superior ventilation, and a dual-swivel
positioning system with degree markings.
Specifications subject to change without notice.
7 5 - WAT T
PA R 3 6 S P O T L I G H T / F L O O D L I G H T S E R I E S
Features
• Can be used with 12-volt PAR36 or AR-111 lamps
• Track, canopy, stem and Unistrut™ options available
• Lightweight spun aluminum and laser-cut steel
• Internal accessory holder and safety cable included
• Dimmable 75-watt 12-volt short-circuit and thermal-protected
transformer
• Tool-free relamping and lockable beam rotation
• U.L & c.U.L listed for 75 watts
• Made in the U.S.A.
������
���������
������
���������
������
���������
������
��������
������
���������
������
���������
��
���������
������
Lighting, Inc.
B R I N G I N G I M A G I N AT I O N TO L I G H T
7 5 - WAT T PA R 3 6 S P O T L I G H T / F L O O D L I G H T S E R I E S
Specifications
Catalog
Number
IQ36
Housing: Lightweight spun aluminum.
O R D E R I N G I N F O R M AT I O N
Materials: Corrosion-resistant materials and hardware.
Yoke: 14-gauge laser-cut steel.
model
voltage
Part Number: IQ36 –
Rating: 120-volt A/C operation, 0.625 amps, 75 watts
maximum (220-240VAC, 50/60 Hz unit available).
110
220
Transformer: 75-watt 12-volt dimmable electronic.
Short-circuit and thermal protected. Electronic internal
resettable protection. Patent-pending automatic heat
regulation that also acts as overload protection. Thermal
auto-reset 125˚C switch.
color
– ( B )lack
( W ) hite
( S ) ilver
( X ) Custom
Cable: 6ʹ total length with molded Edison plug (unless
track or canopy options are specified).
Finish: Black TGIC polyester, electrostatic application.
White and silver also available.
A C C E S S O R I E S
S U P P L I E D
W I T H
L U M I N A I R E
Weight: Approximately 3 lbs. (1.4 Kg).
L A M P D ATA
watts
volts
center beam
candlepower
color temp.
rated life
(hours)
35AR111/SSP4
35
12
40,000
3000˚K
3,000
35AR111/SP8
35
12
14,000
3000˚K
3,000
8˚
35AR111/FL25
35
12
2,500
3000˚K
3,000
45˚
50AR111/SSP4
50
12
45,000
3000˚K
3,000
4˚
50AR111/SP8
50
12
20,000
3000˚K
3,000
8˚
50AR111/FL25
50
12
4,000
3000˚K
3,000
25˚
75AR111/SP8
75
12
30,000
3000˚K
3,000
8˚
75AR111/FL25
75
12
5,300
3000˚K
3,000
25˚
75AR111/WFL45
75
12
2,000
3000˚K
3,000
45˚
50PAR36/H/SP5
50
12
35,000
4000˚K
3,050
5˚
50PAR36/H/SP8
50
12
30,000
4000˚K
3,050
8˚
50PAR36/H/FL30
50
12
1,300
4000˚K
3,050
30˚
manufacturer lamp code
beam angle
6ʺ
distance
5ʹ
714
8.5ʺ
7ʹ
432
11ʺ
9ʹ
350
1ʹ
10ʹ
156
88
1.31ʹ 1.75ʹ
15ʹ
diameter
1,400
Accessory Retainer for 3¾ʺ diameter
accessories
MSC
Mini Safety Cable
4˚
P H O T O M E T R I C S W I T H 5 0 PA R 3 6 / H / S P 5 L A M P
peak beam footcandles
70–0458
20ʹ
A D D I T I O N A L
A C C E S S O R I E S
IQ30-CH
Cylindrical Hood
IQ30-SCH
Sparkle Cylindrical Hood
IQ30-BD4
4-Leaf Barn Door
IQ30-CF
Color Filter Holder
IQ30-LV
¼ʺ Honeycomb Louver
IQ30-SL
Prismatic Spread Lens
IQ30-LSL
Linear Spread Lens
IQ30-DCF-✱
Dichroic Glass Filter (✱ specify color)
IQ30-SGF-✱
Slit Glass Filter (✱ specify color)
510-F
Light-Duty Flat Steel Pipe Clamp for ¼ʺ
to 1½ʺ Pipe (includes 5∕16ʺ bolt)
510
Malleable Iron Pipe Clamp for ¾ʺ to
1½ʺ Pipe (includes ½ʺ bolt)
MEGACLAMP-✱
Extruded Aluminum Clamp for ¾ʺ to 2ʺ
Pipe (includes ½ʺ bolt; ✱ specify black
or silver)
MINICLAMP-✱
Extruded Aluminum Clamp for ½ʺ
to 1½ʺ Pipe (includes 3∕ 8ʺ bolt;
✱ specify black or silver)
MICROCLAMP-✱
Extruded Aluminum Clamp for 3∕8ʺ to 1ʺ
pipe (includes 5∕16ʺ bolt; ✱ specify black
or silver)
TLA-166*
Nordic Eco 1-Circuit Track Adapter
TLA-TEK68*
Nordic Spec Grade 2-Circuit Track
Adapter
PHOTOMETRICS WITH 75AR111/8/SP LAMP
1,200
1ʺ
distance
5ʹ
������
Lighting, Inc.
B R I N G I N G I M A G I N AT I O N TO L I G H T
612
1.4ʺ
7ʹ
370
1.75ʹ
9ʹ
300
2ʹ
10ʹ
133
2.1ʹ
15ʹ
75
2.8ʹ
20ʹ
diameter
peak beam footcandles
TLA-XTSA66* Nordic Spec Grade 3-Circuit Track
Adapter
TLA-L*
Lightolier Lytespan® 1-Circuit Track
Adapter
TLA-H*
Halo 1-Circuit Track Adapter
54-SVT18324CC
Coiled Cord with Edison Connector—
24ʺ retracted, 6ʹ extended (factoryinstalled)
Canopy, Unistrut™, and Stem-Mount
Options Available
Copyright © 2004 Altman Lighting, Inc., 57 Alexander Street, Yonkers, NY 10701. Tel.: 914.476.7987 / 212.569.7777 / 800.4.ALTMAN.
Fax: 914.963.7304. Visit us online at http://www.altmanlighting.com.
Altman Lighting, Inc. is a wholly owned subsidiary of Altman Stage Lighting Company, Inc.
030405
a
c.
pi.
Reflector 50W MP 12V PAR36 WFL CL 1CT
+ Images
General
+ Texts
PRODUCT DATA
Product Number
296038
Full product name
Reflector 50W MP 12V PAR36 WFL CL 1CT
Ordering Code
50PAR36/WFL
Pack type
1 Lamp in a Folding Carton
Pieces per pack
1
Packs per case
12
Pack UPC
046677296032
EAN2US
-
Case Bar Code
50046677296037
Successor Product number
-
Wattage[W ]
50W
Base
MP [AKA: Screw Terminal]
Voltage[V ]
12V
Bulb
PAR36 [Diameter: 4.5 inch]
Beam Description
WFL [Wide Flood]
Bulb Finish
CL [Clear]
Packing Type
1CT [1 Lamp in a Folding Carton]
Base Information
Brass[Brass Base]
Filament Shape
C-6[Straight]
Operating Position
Universal[Universal]
Packing Configuration
12
Atmosphere
Gas
Rated Avg. Life[hr ]
2000
Max Overall Length (MOL) - C[in ]
2.75
hfh
THEMED ARCHITECTURAL LIGHTING
Catalog
Number
TLA-3D series
Fixture Type:
TLA-3D
Altman’s SMART TRACK™ lighting system is a revolutionary way to bring
a DMX signal to an addressable fixture without the need for dimmer packs
and bulky cable runs. this aesthetically pleasing three-circuit DMX track is the
perfect solution to any architectural application where appearance and versatility
are important.
This heavy-duty extruded aluminum profile is ideal for demanding applications where numerous
and/or heavy fixtures are needed. The three power circuits offer endless merchandising and ambiance creation opportunities. Certain fixtures can be dimmed or shut off while others can be set to
intensely illuminate objects. By adding the DMX control signal, specific dimming and effects can be
obtained from a moving light, conventional fixture or even Altman’s new IQseries of quartz, metalhalide and even LED architectural fixtures all from one single track. Maximum control and reduced
energy costs make Altman’s SMART TRACK™ lighting system an excellent choice.
Specifications subject to change without notice.
DMX SMART TRACK™ LIGHTING SYSTEM
Features
3-Circuit Control
Quality Construction
• Energy savings—certain lights can be
dimmed or shut off while others illuminate
products
• ISO 9001
• Enhanced merchandising—attention can
be focused on select products
Separate Mechanical
Suspension Points
• Superior weight-bearing capacity
• Rigid aluminum profile
• Integrity of electrical contacts is
maintained, preventing arcing and
extending the life of fixtures and
lamps
• High-quality powder-coat finish
Oversized Conductors
• Higher operating safety
Control Signal
• Reduced overload potential
Secure Bus Bar Insulation
• Permits control of an individual lighting
fixture as well as a group of fixtures
• Insulation is firmly crimped in place to
prevent movement of the conductors or
the insulation for life of product
Simplified Installation
• Easy regulation of both intensity and
brightness
• Surface mounting with easy-to-use mounting clips or direct mounting to ceiling
through pre-drilled screw holes
�������
�������
��������
������������������
• Feedable L or T connectors simplify installation, particularly with grid configurations
�������
������������
�����������
�������
�������
��������
��������
�������
��������
���� �������������
�
������������
���������������������
����
�������� ���
������������������������������������������
�����������������
��������
������������������������� �✱ �
����������� �
����������� �������������� ����✱ �
����
���
�����������������
��������������������
���������������������
����������������������
�������
������
Lighting, Inc.
B R I N G I N G I M A G I N AT I O N TO L I G H T
DMX SMART TRACK™ LIGHTING SYSTEM
Components
��������������������
���������������
Catalog
Number
TLA-3D series
TLA-GC68 control adapter
• Includes a power takeoff and controlwire connectors
�
�
�
�������������
TLA-GC11/12
control feed
�
�
�
• Connects control cable to
track system with end feed
TLA-GCM module
• Allows installation of systemdependent DMX terminator
(90–120 ohms) between + and –
TLA-GC21 straight connector
• Transmits control signal over a
3-circuit straight connector
��������������
�
�
�
�
�
�
���
���
TLA-GCL connector
• Transmits control signal over
a 3-circuit L connector
�
�
�
�
�
�
TLA-GCT connector
• Transmits control signal over a 3-circuit T connector
��
�
I n s t a l l a t i o n i n Tw o
Phases
1. SMART TRACK™ is mounted with standard
3-circuit accessories (Altman catalog numbers ASL-✱).
2. SMART TRACK ™ accessories are then
snapped into the track, followed by cover
units.
The system is now ready for TLA-GC68–
equipped fixtures.
������
Lighting, Inc.
B R I N G I N G I M A G I N AT I O N TO L I G H T
Copyright © 2004 Altman Lighting, Inc., 57 Alexander Street, Yonkers, NY 10701. Tel.: 914.476.7987 / 212.569.7777 / 800.4.ALTMAN.
Fax: 914.963.7304. Visit us online at http://www.altmanlighting.com.
Altman Lighting, Inc. is a wholly owned subsidiary of Altman Stage Lighting Company, Inc.
Global trac® is a registered trademark of Nordic Aluminum Plc. LON® is a registered trademark of Echelon Corporation.
032604
TYPE: Z1
Metal
Halide
Lamp Ballast
Catalog Number 71A5482
For 150W M102/M142
60 Hz HX-HPF
Status: Active
DIMENSIONS AND DATA
3 X 4 CORE - 2 COIL UNIT
5.10 "
4.50"
0.7"
1.0"
A
B
MAX.
0.25" WIDE
2 SLOTS
3.95"
3.50"
4 HOLES
CLEARED
FOR #10
THRU-BOLTS
2.45"
2.80"
Capacitor: 7C160M33
2.90"
INPUT VOLTS
120 277
HX-HPF
CIRCUIT TYPE
90%
POWER FACTOR (min)
REGULATION
Line Volts
±5%
Lamp Watts
±12%
LINE CURRENT (Amps)
Operating...................................................
1.60 0.70
Open Circuit...............................................
3.65 1.58
Starting......................................................
0.95 0.42
UL TEMPERATURE RATINGS
Insulation Class
H(180°C)
Coil Temperature Code
C
B
1029
MIN. AMBIENT STARTING TEMP.
-20°F or -30°C
NOM. OPEN CIRCUIT VOLTAGE
265
INPUT VOLTAGE AT LAMP DROPOUT...........................
90 208
INPUT WATTS
185
RECOMMENDED FUSE (Amps).....................................
10
4
CORE and COIL
Dimension (A)
2.25
Dimension (B)
3.87
Weight (lbs.)
7
Lead Lengths
12"
CAPACITOR REQUIREMENT
Microfarads
16.0
Volts (min.)
280
Fault Current Withstand (amps)
60 Hz TEST PROCEDURES (Refer to Advance Test
Procedure for HID Ballasts - Form 1270)
High Potential Test (Volts)
1 minute
2000
2 seconds
2500
Open Circuit Voltage Test (Volts)
235-290
Short-Circuit Current Test (Amps)
Secondary Current
2.05-2.55
Input Current..............................................
1.20 0.50
1.90 0.80
-
-
-
Wiring Diagram:
CAP
LAMP
LINE V
LINE V
X3
X1
IGNITOR
CAP
LAMP
LINE V
X2
COM
LINE V
Capacitance:
Dia/Oval Dim:
Height:
Temp Rating:
16
1.5
3.75
105°C
COM
COM
Fig. K
Ordering Information
Ignitor: LI533-H4
Order Suffix
500D.
510D.
600.
610.
Description
Ballast With Ignitor and Dry Film Capacitor
Ballast w/Welded Bracket, Ignitor, & Dry Film Capacitor
Ballast and Ignitor, No Capacitor
Ballast with Welded Bracket and Ignitor, No Capacitor
Ballast to Lamp Distance
(BTL) = 10 feet
Temp Rating: 105°C
Data is based upon tests performed by Advance Transformer in a controlled environment and representitive of relative performance.
Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ADVANCE TRANSFORMER CO.
O'HARE INTERNATIONAL CENTER · 10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Customer Support/Technical Service: Phone: 800-372-3331 · Fax: 630-307-3071
Corporate Offices: Phone: 800-322-2086
12/09/03
BIG SCIENCE PARK
Notes:
TYPE: P1
DF12-ST-MFL-250MH-277-NP
TYPE: X1
DF12-J-HFL-70MH-277-NP
Job:
Type:
DESIGNER FLOOD
DF7 - 7" DIAMETER
GENERAL DESCRIPTION: The Gardco DF7 is a flood luminaire with a choice of (4) precision faceted optical
systems. Each is designed to provide a specific distribution and sharp cutoff of stray light. The contemporary soft
form diecast housing is available in a variety of finishes creating compatibility with most architectural and landscape
elements. The high strength diecast aluminum knuckle features an integral splice compartment eliminating the need
for a supplementary junction box and thereby permitting closer to grade mounting.
ORDERING
MOUNTING
PREFIX
DISTRIBUTION
WATTAGE
VOLTAGE
FINISH
OPTIONS
Enter the order code into the appropriate box above. Note: Gardco reserves the right to refuse a configuration. Not all combinations and configurations are valid.
Refer to notes below for exclusions and limitations. For questions or concerns, please consult the factory.
PREFIX
MOUNTING
DF7
C
J
W
WMB
W90
ST
SM
Stub-up Conduit Mount. For direct mounting to (2) 1/2" or 3/4" GRC or IMC conduits. No j-box required.
Must use factory supplied mounting insert when setting stub-ups.
J-Box Mount. For mounting into 1/2" hub. Also suitable for direct surface mount to walls or ceilings when fed by EMT, BX, SJO, NM, etc.
(For surface mount over outlet box, specify W or W90 mount).
Wall/Ceiling Canopy Mount. For mounting over (not to) a 4" recessed outlet box. When mounted on vertical surface, provides vertical
aiming from straight down tp 100° up from nadir. When mounted on a vertical surface, long axis of luminaire must be horizontal
(+/-30°). Mounts directly to wall or ceiling. The surface structure must be suitable to support the luminaire. Only suitable for use on
non-combustable surfaces.
Wall Mount with Bullhorn. For mounting over (not to) a 4" recessed outlet box. Provides full axial 180° vertical and 358° rotational
aiming range. Mounts direct to wall. Surface structure must be suitable to support the luminaire. When mounted in wet locations,
luminaire must be mounted as shown in diagrams on opposite page. In damp or dry locations, arm assembly may be inverted.
Wall Arm Mount. For mounting over (not to) a 4" recessed outlet box. Provides full axial 180° vertical and 358° rotational aiming range.
Mounts direct to wall. Surface structure must be suitable to support the luminaire. When mounted in wet locations, luminaire must be
mounted as shown in diagrams on opposite page. In damp or dry locations, arm assembly may be inverted.
Stanchion Mount. 18” stanchion for in-ground concrete burial mounting.
Surface Mount Stanchion. For mounting to 18” stanchion pole assembly.
DISTRIBUTION
HFL
W AT TA G E
70HPS
100HPS
150HPS
Horizontal Flood
N/A w/250w
VFL
Vertical Flood
HSP
Horizontal Spot
NSP
Narrow Spot
V O LTA G E
70MH
100MH
150MH
175MH
250MH
FINISH
BRP
BLP
WP
NP
BGP
VP
120
208
240
277
347
( 2 5 0 M H Uses ED-18 orT15 Mogul Base
Lamps. N/A w/HFL Distribution,
or PCB, POLY, F or ESB options.)
Not available in 250MH
OPTIONS
Bronze Paint
Black Paint
White Paint
Natural Aluminum Paint
Beige Paint
Verde Green Paint
OC
Optional Color Paint
PCB Button Type Photocontrol
BD* Barn Doors
CH* Cutoff Hood
Specify RAL designation
ex: OC-RAL7024
SC
N/A w/250w
Barn Doors (BD) and Cutoff Hoods (CH) are supplied BRP with BRP
luminaires and BLP with all other finishes. Either can be used
concurrently with the Polycarbonate Shield (POLY)
Special Color Paint
Specify. Must supply color chip
POLY Polycarbonate Shield
F
Fusing N/A w/250w
ESB Extended Splice Box
N/A w/250w
Supplied standard w/250w. Not available for use as additional
splicing volume.
DF7 Splice Compartment Wire Capacity
ADDITIONAL MOUNTING ACCESSORIES:
DF7 Pole Loading Data
EPA ft2
Single Luminaire on PTA Adapter
1.3
#12 AWG Conductors3
5
9
5
Twin Luminaires on PT2 Adapter
1.9
#10 AWG Conductors3
3
7
3
Twin Luminaires on TAB Adapter
2.8
PTA Pole top 2 3/8" tenon adapter
TAB Twin arm bracket for use with ST or PTA
PT2 Pole top 2 3/8" tenon adapter for twin back to back
luminaire mounting.
3. Including ground
Gardco Lighting reserves the right to change materials or modify the design of its product without
notification as part of the company's continuing product improvement program.
© Copyright Gardco Lighting 2001-2004. All Rights Reserved. International Copyright Secured.
A Genlyte Company
Gardco Lighting
2661 Alvarado Street
San Leandro, CA 94577
800/227-0758
510/357-6900 in California
Fax: 510/357-3088
www.sitelighting.com
79115-73/0604
DESIGNER FLOOD
DF7 - 7" DIAMETER
S P E C I F I C AT I O N S
HOUSING: A single-piece aluminum housing is cast in a soft barrel form. A
one piece extruded gasket mates with door frame.
3
DOOR/LENS ASSEMBLY: A heat and impact resistant /16" tempered glass
lens and one piece silicone gasket are mechanically secured to door frame.
systems are homogenous sheet and extruded aluminum, electrochemically
brightened, anodized and sealed. The narrow spot reflector is hydroformed
faceted Alzak ® aluminum.
ELECTRICAL: Each high power factor ballast is the separate component
magnetic type capable of providing reliable lamp starting to -20°F.
KNUCKLE: The diecast aluminum knuckle features an integral splice
3
compartment. A single captive /8" stainless steel allen-head bolt and stainless
steel nut securely lock the knuckle aiming teeth in 5° increments. An opposite
cover plate is removable for access to splices. The knuckle assembly is fully
gasketed.
LAMPHOLDER: The pulse rated socket is glazed porcelain with nickle plated
screw shell. All sockets are medium base except 250W metal halide units.
FINISH: Each luminaire receives a fade and abrasion resistant,
electrostatically applied, thermally cured textured, polyester powdercoat finish.
OPTICAL SYSTEM: The wide flood, vertical flood and horizontal spot optical
LABELS: All fixtures bear UL or CUL (where applicable) Wet Location labels.
D I M E N S I O N S A N D M O U N T I N G D E TA I L
DF7-C
DF7-J
16"
16"
9"
9"
13.38"
13.38"
180°
358°
250w units
70-175w units
7"
9.5"
(2) DF7-SP
29.19"
36"
TAB - Twin Arm Bracket*
PTA - Pole Top Adaptor*
PT2 - Twin Pole Top Adaptor*
RSA4 Pole with 2 3/8"X 4" Tenon
(Specify Height)
ST-18" Stanchion*
RSA4 Pole with 2 3/8"X 4" Tenon
(Specify Height)
24"
DF7-W
DF7-WMB
DF7-ST
DF7-W90
ø 7"
18"
18.00
1.9"
Ø1.90
3"
2" -12"
6.9"
6"
6.90
RSA4 Pole with
2 3/8"X 4" Tenon
(Specify Height)
ST-18" Stanchion*
2.5"
2.50
ø 7"
PTA - Pole Top Adaptor*
ø 4"
5.0" 3.54"
5.00
3.54
2.5"
2.50
3.54"
5.0"
11.88"
3.54
5.00
0.63" * Order mounting accessories separately.
4X Ø.63
Gardco Lighting reserves the right to change materials or modify the design of its product without
notification as part of the company's continuing product improvement program.
© Copyright Gardco Lighting 2001-2004. All Rights Reserved. International Copyright Secured.
A Genlyte Company
Gardco Lighting
2661 Alvarado Street
San Leandro, CA 94577
800/227-0758
510/357-6900 in California
Fax: 510/357-3088
www.sitelighting.com
79115-XX0604
MasterColor CDM 70W/830 Med ED17 CL ALTO
PRODUCT DATA
Product Number
208843
Full product name
MasterColor CDM 70W/830 Med ED17 CL ALTO
Ordering Code
MHC70/U/M/3K ALTO
Pack type
1 Sleeve Open End
Pieces per pack
1
Packs per case
12
Pack UPC
046677208844
EAN2US
-
Case Bar Code
50046677208849
Successor Product number
-
Wattage[W ]
70W
Color Code
830 [CCT of 3000K]
Base
Med [Medium]
Bulb
ED17 [Diameter: 2.125 inch]
Bulb Finish
CL [Clear]
Feature
ALTO [ALTO®]
Base Information
Brass[Brass Base]
Bulb Material
Hard Glass
Operating Position
Universal[Universal]
Packing Type
1SL[1 Sleeve Open End]
Packing Configuration
12
Rated Avg. Life[hr ]
16000
Mercury Weight[mg ]
6.95
ANSI Code HID
M143/M98/E
Lamp Voltage[V ]
100
Color Rendering Index[Ra8 ]
85
Color Designation
Warm White
Color Temperature[K ]
3000
Initial Lumens[Lm ]
6200
Design Mean Lumens[Lm ]
4585
Light Center Length L [inch][in ]
3.438
Max Overall Length (MOL) - C[in ]
5.438
Diameter D[in ]
2.125
©2004-2005 Koninklijke Philips Electronics N.V. All rights reserved. Privacy policy
Philips. Access to and use of this Web Site is subject to these Terms of use.
Switch Start MH Protected 250W/640 EX39 ED28
CL
PRODUCT DATA
Product Number
281246
Full product name
Switch Start MH Protected 250W/640 EX39 ED28 CL
Ordering Code
MP250/BU
Pack type
1 Sleeve Open End
Pieces per pack
1
Packs per case
12
Pack UPC
046677281243
EAN2US
-
Case Bar Code
50046677281248
Successor Product number
-
Wattage[W ]
250W
Color Code
640 [CCT of 4000K]
Base
EX39 [Exclusionary Mogul Screw]
Bulb
ED28 [Diameter: 3.5 inch]
Bulb Finish
CL [Clear]
Base Information
Nic/Brass[Nickel/Brass Base]
Bulb Material
Hard Glass
Execution
Protected
Operating Position
Base Up +/-15D[Base Up +/-15D]
Packing Type
1SL[1 Sleeve Open End]
Packing Configuration
12
Rated Avg. Life[hr ]
10000
Mercury Weight[mg ]
30.1
Energy Saving Product
Not Applicable
ANSI Code HID
M58/O
Lamp Voltage[V ]
133
Color Rendering Index[Ra8 ]
62
Color Designation
Cool White
Color Temperature[K ]
3800
Initial Lumens[Lm ]
21500
Design Mean Lumens[Lm ]
16500
Light Center Length L [inch][in ]
5
Max Overall Length (MOL) - C[in ]
8.313
Diameter D[in ]
3.5
©2004-2005 Koninklijke Philips Electronics N.V. All rights reserved. Privacy policy
Philips. Access to and use of this Web Site is subject to these Terms of use.
E
TYPE: X2
Tesis Recessed floor luminaire
33721.023
Uplight for metal halide lamps
16 3/16"
410mm
11 3/4"
∅ 297mm
CO 10 15/16"
CO ∅ 277mm
Size 7
50°
T6
Nä ö ü
Dry Damp Wet
ÖOutdoor
33721.023
Reflector color Silver
T6 70W G12 6600lm
ECG
Product description
Housing: corrosion-resistant, cast
aluminum, No-rinse surface treatment. Black double powder-coated.
Mounting by means of an adjustable bar. Clamp extension up to
1 3/8" / 35mm.
Electronic control gear 120V, 60Hz.
Cable, L 39" / 1m.
Low brightness reflector: aluminum, silver, specular anodized. Cutoff angle 50° from horizontal. Diffuser: glass, frosted. Without spill
light.
Screw-mounted cover ring with
flush safety glass: corrosion resistant stainless steel.
Safety glass: 1/2"/ 12mm, clear.
Surface temperature 185°F / 85°C.
Can be driven over by vehicles with
pneumatic tyres. Load 9890lb.wt /
44kN.
Suitable for wet location (IP68):
dust-proof.
Weigth: 19.18 lbs / 8.70 kg
ERCO Lighting, Inc.
160 Raritan Center Parkway
Suite 10
Edison, NJ 08837
USA
Tel.: +1 732 225 8856
Fax: +1 732 225 8857
info.us@erco.com
10000 cd
150°
150°
120°
120°
T6 70W G12 6600lm
Technical Region: 120V/60Hz
Edition: 09.12.2004
Please download latest version from
www.erco.com/33721.023
1/2
E
Tesis Recessed floor luminaire
Accessories
33963.000
Housing for recessed mounting
Corrosion-resistant, cast aluminum,
No-rinse surface treatment. Black,
double powder-coated. 2 cable
entries.
Diameter 17 7/16" / 442mm.
Recessed depth 18 1/2" / 470mm.
Installation aperture ø 10 15/16" /
277mm.
Weight 15.41lbs / 7.00kg.
33951.000
Domed glass
To hinder accumulation of dirt.
Load 1125lb.wt / 5kN.
Tesis Recessed floor luminaire
33721.023
2/2
MasterColor CDM-T 70W/830 G12 T6 1CT
PRODUCT DATA
Product Number
223370
Full product name
MasterColor CDM-T 70W/830 G12 T6 1CT
Ordering Code
CDM70/T6/830
Pack type
1 Lamp in a Folding Carton
Pieces per pack
1
Packs per case
12
Pack UPC
046677223373
EAN2US
-
Case Bar Code
50046677223378
Successor Product number
-
Wattage[W ]
70W
Color Code
830 [CCT of 3000K]
Base
G12
Bulb
T6 [Diameter: .75 inch]
Packing Type
1CT [1 Lamp in a Folding Carton]
Packing Configuration
12
Bulb Finish
Clear
Operating Position
Universal[Universal]
Rated Avg. Life[hr ]
12000
System Power EL[W ]
83
Lamp Voltage[V ]
88
Dimmable
No
Color Rendering Index[Ra8 ]
81
Color Designation
Warm White
Color Description
830 Warm White
Color Temperature[K ]
3000
Initial Lumens[Lm ]
6600
Overall Length C[mm ]
103
Diameter D[mm ]
20
©2004-2005 Koninklijke Philips Electronics N.V. All rights reserved. Privacy policy
Philips. Access to and use of this Web Site is subject to these Terms of use.
Metal
Halide
Lamp Ballast
Catalog Number 72C5282
For 70W
M98
60 Hz HX-HPF
Status: Active
DIMENSIONS AND DATA
10.50"
2.63"
CASE "F-1"
11.13"
3.19"
11.75"
Capacitor:
INPUT VOLTS
120 277
HX-HPF
CIRCUIT TYPE
90%
POWER FACTOR (min)
REGULATION
Line Volts
±5%
Lamp Watts
±10%
LINE CURRENT (Amps)
Operating...................................................
0.85 0.37
Open Circuit...............................................
1.60 0.75
Starting......................................................
1.25 0.55
UL TEMPERATURE RATINGS
Insulation Class
A (105°C)
Coil Temperature Code
1029
MIN. AMBIENT STARTING TEMP.
-20°F or -30°C
NOM. OPEN CIRCUIT VOLTAGE
255
INPUT VOLTAGE AT LAMP DROPOUT...........................
84 194
INPUT WATTS
94
RECOMMENDED FUSE (Amps).....................................
4
2
CORE and COIL
Dimension (A)
Dimension (B)
Weight (lbs.)
8.5
Lead Lengths
12"
CAPACITOR REQUIREMENT
Microfarads
Volts (min.)
Fault Current Withstand (amps)
60 Hz TEST PROCEDURES (Refer to Advance Test
Procedure for HID Ballasts - Form 1270)
High Potential Test (Volts)
1 minute
1600
2 seconds
2000
Open Circuit Voltage Test (Volts)
230-280
Short-Circuit Current Test (Amps)
Secondary Current
0.95-1.20
Input Current..............................................
0.55 0.25
0.85 0.40
-
-
-
Wiring Diagram:
All Lead Lengths 12"
277 V
The capacitor is included as
part of the potted assembly.
120V
COMMON
YELLOW/BLUE
BLACK
BALLAST
WHITE
RED
LAMP
GROUND CASE
F-Can Wiring Diagram
Ordering Information
Ignitor: IN CAN
Order Suffix
Description
The ignitor is included as
part of the potted assembly.
Ballast to Lamp Distance
(BTL) = 20 feet
Temp Rating: 90°C
Data is based upon tests performed by Advance Transformer in a controlled environment and representitive of relative performance.
Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ADVANCE TRANSFORMER CO.
O'HARE INTERNATIONAL CENTER · 10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Customer Support/Technical Service: Phone: 800-372-3331 · Fax: 630-307-3071
Corporate Offices: Phone: 800-322-2086
04/30/99
Metal
Halide
Lamp Ballast
Catalog Number 71A5780
For 250W M58
60 Hz CWA
Status: Active
DIMENSIONS AND DATA
4 1/4 X 4 3/4 CORE - 2 COIL UNIT
6.50"
5.75"
0.7"
1.30"
A
B
MAX.
0.30" WIDE
2 SLOTS
4 HOLES
CLEARED
FOR #10
THRU-BOLTS
4.75"
4.40"
3.90"
4.25"
Capacitor: 7C150P40-R
4.40"
INPUT VOLTS
120 277
CWA
CIRCUIT TYPE
90%
POWER FACTOR (min)
REGULATION
Line Volts
±10%
Lamp Watts
±10%
LINE CURRENT (Amps)
Operating...................................................
2.50 1.10
Open Circuit...............................................
1.70 0.75
Starting......................................................
2.20 1.00
UL TEMPERATURE RATINGS
Insulation Class
H(180°C)
Coil Temperature Code
A
A
1029
MIN. AMBIENT STARTING TEMP.
-20°F or -30°C
NOM. OPEN CIRCUIT VOLTAGE
300
INPUT VOLTAGE AT LAMP DROPOUT...........................
60 138
INPUT WATTS
295
RECOMMENDED FUSE (Amps).....................................
8
3
CORE and COIL
Dimension (A)
1.50
Dimension (B)
3.00
Weight (lbs.)
9
Lead Lengths
12"
CAPACITOR REQUIREMENT
Microfarads
15.0
Volts (min.)
400
Fault Current Withstand (amps)
60 Hz TEST PROCEDURES (Refer to Advance Test
Procedure for HID Ballasts - Form 1270)
High Potential Test (Volts)
1 minute
2000
2 seconds
2500
Open Circuit Voltage Test (Volts)
270-330
Short-Circuit Current Test (Amps)
Secondary Current
2.25-2.75
Input Current..............................................
1.90 0.80
2.70 1.20
-
-
-
Wiring Diagram:
LINE V
CAP
CAP
LAMP
LINE V
LINE V
LAMP
LINE V
Capacitance:
Dia/Oval Dim:
Height:
Temp Rating:
15
1.75
3.75
105°C
COM
COM
Fig. A
Ordering Information
Ignitor: NA
Order Suffix
This ballast does not
require the use of an ignitor.
500D
510D
600
610
Description
Ballast with Dry Film Capacitor
Ballast w/Welded Bracket & Dry Film Capacitor
Ballast Only, No Capacitor
Ballast with Welded Bracket, No Capacitor
Data is based upon tests performed by Advance Transformer in a controlled environment and representitive of relative performance.
Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ADVANCE TRANSFORMER CO.
O'HARE INTERNATIONAL CENTER · 10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Customer Support/Technical Service: Phone: 800-372-3331 · Fax: 630-307-3071
Corporate Offices: Phone: 800-322-2086
03/31/99
Controls
Touch-Plate® Lighting Controls
Control Plus Series Lighting Control Panels
•
Factory pre-assembled and tested.
•
ETL listed as an assembly.
•
Easy to install and start-up.
•
No programming skills required, simple switch based control
assignments, color-coded connections.
•
Easy to integrate with other control systems, A/V, BMS, HVAC,
security, etc.
•
Master control with both central automated controls along with
local/manual override.
CPS-0008
18”x14”x4-1/4”
CPS-0016
24”x18”x4-1/4”
CPS-0024
32”x18”x4-1/4”
•
Simple switch
annunciation.
•
Accepts Cycle, On/Off, & Maintained switch inputs, all standard
for each relay.
•
20 Amp 120 and 277 VAC lighting relays, (347 VAC Canada).
•
Integrates Occupancy Sensors, Photocells, and Time-of-Day
Controls.
•
Expanded capability with addition of Solution Series Control
Devices.
CPS-0032
40”x19”x4-1/4”
The Control Plus Series (CPS) is a high technology lighting control
system designed to meet the vast majority of lighting control
requirements. The relay panel can be combined with CPS Dimmer
panels and CPS Solution Series control devices to offer one of the
most powerful, flexible and inexpensive systems available.
CPS is an “Event-Driven” control system, so it obeys the last signal
received. Any combination of switching devices (momentary, cycle,
maintained) can be wired to the inputs of the control board for each
relay. The relay will switch according to the last input signal. Input
devices may be manual switches, time clocks, photo-sensors,
occupancy sensors or any device that produces a switch signal.
CPS is used where flexible control of lighting or any other
electrically controlled load is needed. It consists of a 16 gauge steel
enclosure, 3000-PL relays, a 120/277 volt dual primary and dual
secondary transformer, power supply card, and logic control boards
pre-wired at the factory.
The panels allow loads to be controlled by multiple inputs and
logical control groups. It is designed to accept the
based
control
includes
CPS-0040
48”x19”x4-1/4"
remote
pilot
CPS-0048
56”x24”x4-1/4”
Following input types: CYCLE (single button momentary), discreet
ON/OFF (momentary On, momentary Off), and MAINTAINED
(standard toggle wall switch or any sustained contact enclosure).
Any combination of switching devices can be wired to the control
board inputs for each relay. In addition, each relay has a 6.3 VAC
output for L.E.D. indicators at the switch locations. This output
signal can be converted into a dry contact for status feedback to
interface with a Building Management System, Security System,
A/V System or other system, (see Solution Series).
CPS panels have the ability to group relays in several ways.
Zone mastering is provided for each relay in groups of eight on a
relay control board. The Zone Master slide switches can be set to
include each relay in one of two groups or exclude it from the
groups. Multiple relay control boards can be linked to operate
together making a large group, or kept separate in groups of eight
relays.
In addition to all other individual and zone inputs, a Master input
enables the operator to sweep an entire panel with one input
(switch, time clock, etc.).
Touch-Plate® Lighting Controls
1830 Wayne Trace
Fort Wayne, IN 46803
Phone: 260-424-4323
Fax: 260-420-3651
light
Sales Support Email: sales@touchplate.com
World Wide Web: http://www.touchplate.com
Unison CE Architectural
Controls
Unison
Architectural
Controls
Elegant and discreet, simple
yet powerful, Unison
control stations provide a
comprehensive user interface
to any architectural lighting
control system. Available in
an attractive range of finishes,
button, fader, infrared and
LCD touchscreen stations
combine to give you just the
control you want, wherever
you want it.
Unison’s flexibility is
unparalleled – any button or
fader may be configured for
virtually any function
including preset selection,
room combine, and macro
selection. An integral
astronomical timeclock
provides a wide variety of
programming options.
Interface stations offer
integration with AV, security
and building management
systems, making Unison the
future-safe choice. And
Unison’s industry standard
Echelon® Link power network
means simple wiring and lowcost installation.
Features:
• Programmable buttons and
faders
• Zone and preset control
• Record, select, and edit
presets
• LCD Touchscreen
• XY moving light graphic on
LCD touchscreen
• Room combine
• Macro sequencing
• Astronomical Time Clock
• Topology-free wiring
• Security lockout
• White, black, grey and
ivory faceplates, fader
knobs, and buttons
• Screwless faceplates
• Dry contact Interface
• Configuration on Light
Manager Windows PC
program
unison
Standard Button Station Legends
Station
Standard Fader Station Legends
Model Number
Description
Standard Legend
Options
U00001
1/2 Gang
1 Button
1) On/Off
2) Entry
3) Panic
U00002
1/2 Gang
2 Buttons
1) On, Off
2) Open,close
U00005
1/2 Gang
5 Buttons
1) Preset 1—4, Off
U10001
1 Gang
1 Button
1) Master
2) Entry
3) Panic
U10002
1 Gang
2 Buttons
1) On off
2) Open,close
U10005
1 Gang
5 Buttons
1) Preset 1—4, Off
U10007
1 Gang
7 Buttons
1) Raise, Lower
Preset 1—4, Off
U10010
1 Gang
10 Buttons
1) Preset 1—9, Off
U11K00
U12K00
1 Gang
1 Keyswitch
1)Maintained
2)Momentary
1) Lockout
U11K01—XXX
U12K01—XXX
1 Gang
1 Button
1 Keyswitch
1)Maintained
2)Momentary
1) Lockout, On/Off
2) Lockout, Entry
3) Lockout, Panic
1 Gang
2 Buttons
1 Keyswitch
1)Maintained
2)Momentary
1 Gang
5 Buttons
Keyswitch
1)Maintained
2)Momentary
1) Lockout, On, Off
2) Lockout,
Open,close
Station
Model Number
Description
Standard Legend Options
U10100
1 Gang
1 Fader
1) Master
U10101
1 Gang
1 Fader
1 Button
1) Master, On/Off
2) Master, Entry
3) Master, Panic
U10102
1 Gang
1 Fader
2 Buttons
1) Master, On, Off
2) Master, Open,Close
U10105
1 Gang
1 Fader
5 Buttons
1) Master
Preset 1—4, Off
3—7 Gang
7 Buttons
1) Manual Record
Master Zone 1—X
Preset 1—4, Off
U_____*
U_____* 3—7 Gang 1) Manual Record
12 Button Master Zone 1—X
Preset 1—9, Off
Station dimensions
U11K02—XXX
U12K02—XXX
U11K05—XXX
U12K05—XXX
1) Lockout
Presets 1—4, Off
Flush Applications
Gang Size Back Box
W
1
50mm
3
142mm
4
189mm
5
235mm
6
281mm
7
327mm
LCD
216mm
H
96mm
96mm
96mm
96mm
96mm
96mm
134mm
D
64mm
64mm
64mm
64mm
64mm
64mm
83mm
Surface Applications
Gang Size Back Box
W
1
75mm
3
175mm
4
221mm
5
267mm
6
313mm
7
359mm
LCD
232mm
H
118mm
118mm
118mm
118mm
118mm
118mm
146mm
D
64mm
64mm
64mm
64mm
64mm
64mm
93mm
*...please contact your local ETC Dealer for Preset/Fader Controls Ordering Information
Specifications
Mechanical
White, ivory, grey or black
faceplates with matching fader
knobs and buttons
Flush or surface mounted
All backboxes can be
provided by ETC
ABS plastic faceplates with no
visible means of attachment
Electrical
Echelon® LONWORKS® link
power control network
Low-voltage Class II
unshielded twisted pair, type
Belden 8471 or equivalent,
and one 1.5mm2 drain wire
Connector stations, LCD
stations, and satellite switch
and fader assemblies also
require (2) 1.5mm2 stranded
wires for 24Vdc operating
power. 24Vdc wiring is
topology free
Link power wiring is topology
free and polarity independent
(wiring may be bus, loop,
home-run or any combination
of these)
Network insulation
displacement connectors
provided with all stations
Functional
Designed to allow control of
lighting and associated
systems via buttons and
faders
System presets programmable
via Preset/Fader stations,
LCD stations or Unison Light
Manager software
Fade time programmable
from zero to 1,000 hours
with a resolution of one
millisecond
Presets activated via button,
fader, IR transmitter,
timeclock event, macro
activation or satellite button /
fader station
System macros (sequences)
programmable via Light
Manager software. Macro
sequence steps include preset
selection, wall status change,
station property change
(template), zone property
change, wait, call macro, and
stop macro.
Macro sequences activated by
button, time clock event or
Light Manager software
System timeclock events
programmable via Light
Manager software.
Timeclock events are assigned
to system day types.
Standard day types include:
any day, weekday, weekend,
Sunday, Monday, Tuesday,
Wednesday, Thursday, Friday
and Saturday.
Custom day types possible
Timeclock events activated
based on sunrise, sunset, time
of day or periodic schedule
Automatic compensation
for regions using daylight
savings time
Preset/Fader Stations
Preset stations use up to 10
programmable buttons with
integral LEDs
Preset/Fader stations use up
to twelve programmable
buttons and up to sixteen
programmable faders with
integral LEDs
45 millimeter slide
potentiometers
Control components
(buttons or faders) operate
default functions unless reassigned via Light Manager
Optional button functions
include: preset selection,
manual mode activation,
record mode activation,
station lockout, raise, lower,
macro activation, cue light,
or room join/separate
Optional fader functions
include manual master
control, individual zone
control, fade rate control or
preset master control
Station and component
electronic lock-out levels
programmable via Light
Manager
Keyswitch Stations
Maintained or momentary
keyswitch and up to five
programmable buttons with
integral LEDs.
Optional keyswitch and
button functions include:
preset selection, manual mode
activation, record mode
activation, station lockout,
raise, lower, macro activation,
cue light, or room
join/separate
Station and component
electronic lock-out levels
programmable via Light
Manager
LCD stations
Back-lit liquid crystal
display (LCD) with a
touchscreen interface
Uses graphic buttons, faders
and other images on up
to 30 separate programmable
control pages
Available in white and black
portable desk—top consoles
with cable and connector
Adjustable LCD contrast
and brightness
Adjustable dim delay allows
the station to dim to any
level during periods of
inactivity
LCD control components
operate default functions
unless re-assigned via Light
Manager.
Optional LCD button
functions include: preset
selection, manual mode
activation, record mode
activation, station lockout,
raise, lower, macro activation,
cue light, or room
join/separate. Optional LCD
fader functions include
individual zone control.
Station, page, and component
electronic lock-out levels
programmable via Light
Manager. LCD stations also
allow programming of page
pass-code and visibility levels
Custom LCD control pages
allow import of bitmap
images
Graphic XY faders to control
DMX512 automated fixtures
Infrared (Wireless) Controls
IR transmitters mounted
in a hand-held black
plastic controller 48mm
wide, 168mm long and
16mm deep.
Available in seven or twelve
button standard
configurations
Custom transmitters may
have up to 27 programmable
buttons
An infrared sensor mounted
in the receiver receives the
infrared control signal from
the transmitter.
13m transmission distance at
a 30 degree angle of
transmission
IR components operate
standard default functions
unless re-assigned via
Light Manager
Station and component
electronic lock-out levels
programmable via
Light Manager
Connector Stations
Unison connector stations
provide either interface to a
PC or connection for
portable Unison stations
Unison Satellite Switch and
Fader Assemblies
Provides dry maintained or
momentary contact input or
output signals for interface to
associated systems
Both assemblies provide
24Vdc to drive LED indicator
lights or to provide dry
contact closure signals out
Optional button functions
include: preset selection,
manual mode activation,
record mode activation,
station lockout, raise, lower,
macro activation, cue light, or
room join/separate
Optional fader functions
include manual master
control, individual zone
control, fade rate control or
preset master control
Station and component
electronic lock-out levels
programmable via Light
Manager
Sensor® Racks
ELECTRONIC THEATRE CONTROLS
Standard Series
O R D E R I N G I N F O R M AT I O N
Installation Racks
Model#
Description
SR6
SR12
SR24
SR48
SR6 - 1P
SR12 - 1P
SR24 - 1P
Sensor
Sensor
Sensor
Sensor
Sensor
Sensor
Sensor
6 Module Rack
12 Module Rack
24 Module Rack
48 Module Rack
Single Phase 6 Module Rack
Single Phase 12 Module Rack
Single Phase 24 Module Rack
G E N E R A L I N F O R M AT I O N
Rack Options*
Sensor dimming systems provide high density, professional
features and exceptional reliability for lighting applications
that require the best the entertainment industry can offer.
APPLICATIONS
FEATURES
ACCESSORIES
Professional and educational theatre
Production studios
Concert and performance halls
Large themed retail and dining
High dimmer density
Up to two 2.4kW dimmers per slot
6, 12, 24, and 48 slot racks available
Rugged industrial construction
Installation flexibility
Adaptable modular design
Advanced configuration editing built into rack
Stores up to 32 Backup Looks in rack memory
Dual DMX512 connections
Standard ETCLink reporting and
configuration networking
ETC Dimmer Doubling™
All racks UL and cUL listed
Handheld Controller
Sensor Backup Stations
Dimmer Doubler™
Sound Suppression hood
Model#
Description
AT12
AT24
AT48
BK12
BK24
BK48
SR12 AUX
SR24 AUX
SR48 AUX
SR48 AUX
SR48 AUX
SR12 Amp Trap fuse option
SR24 Amp Trap fuse option
SR48 Amp Trap fuse option
SR12 Bussing option
SR24 Bussing option
SR48 Bussing option
19" Auxiliary Rack(s) for Sensor
19" Auxiliary Rack(s) for Sensor
12" Auxiliary Rack(s) for Sensor
19" Auxiliary Rack(s) for Sensor
30" Auxiliary Rack(s) for Sensor
19
19
12
19
30
SR12
SR24
SR48
SR48
SR48
Racks
Racks
Racks
Racks
Racks
*Vibration Reduction mounts available for all sensor rack modules.
Contact ETC for details
Rack Accessories
2-1.1
Model#
Description
SHH
SB08
SB16
DD
DD-B
DD-C
SSSh 6-12
SSSh 24-48
Sensor Handheld Control Unit
Sensor Backup Station - 8 Button
Sensor Backup Station - 16 Button
Dimmer Doubler without input connector
Dimmer Doubler with Stage Pin input connector
Dimmer Doubler with Twist-loc® input connector
Sensor Sound Suppression Hood - small
Sensor Sound Suppression Hood - large
S P E C I F I C AT I O N S
GENERAL
MECHANICAL
ELECTRICAL
CONTROL
ELECTRONICS
OPTIONS
O R D E R I N G I N F O R M AT I O N
Four sizes of rack available
6 module SR6 - 12 dimmer maximum
12 module SR12 - 24 dimmer maximum
24 module SR24 - 48 dimmer maximum
48 module SR48 - 96 dimmer maximum
Dual density (two dimmers per module), single
density and double-slot single density dimmer
modules available
Ambient temperature: 0-40°C / 32-104°F
Dimmer room HVAC systems must at all times
maintain the specified ambient temperature at the
dimmer rack. Dimming systems operating within 10
degrees F of the upper or lower temperature limits
must strictly follow installation and operation
guidelines to operate reliably.
Ambient humidity: 30-90% non-condensing
All racks UL and cUL listed
Welded, 16-gauge steel construction
Fine-textured, scratch-resistant, gray epoxy paint
SR6 and SR12 uses wall mount installation
SR24 can be wall or pedestal mounted
SR48 is floor mounted
Mounting vibration isolation kits available for all
size racks
Top and bottom conduit access through removable
panels (SR48) or knockouts (SR6, SR12, and SR24)
No tools required for module removal
or installation
Keyed module slots prevent insertion of
inappropriate module types
Front access to all wiring and terminations
Full height locking door
Electrostatic air filter easily removed from door
for periodic cleaning
High efficiency cooling system with airflow sensor
High visibility LED status beacon
SR6, SR12 and SR24 accept:
Three phase 120/208 VAC
Single phase 120/240 VAC
SR48 accepts
Three phase 120/208 VAC
Line feed frequencies from 47-63Hz
Line feed voltage range is 90-140 VAC
Load terminals accept up to#4 AWG wire (see chart)
100k AIC rack rating*
Auxiliary Equipment Racks and custom
switchgear/distribution available
(call ETC for details)
Sensor Control Electronics Module (CEM)
Supports ETCLink diagnostic reporting
Enables two DMX512 inputs
Supports Dimmer Doubling™
Dimmer Doubling™
Sensor Handheld or Rackmount Control Unit
(requires ETCLink)
Advanced Features™ dimmer-specific
output reporting
AMP Trap fuses to allow feeding individual racks
from oversize mains
Dimmer Modules
Model#
Description
Standard Sensor Modules
D15
D20
D15E
D20E
D50AF
D100AF*
Dual 15A
Dual 20A
Dual 15A
Dual 20A
Single 50A
Half 100A
Dimmer
Dimmer
Dimmer
Dimmer
Dimmer
Dimmer
Module
Module
Module
Module
Module
Module
-
350µS
350µS
500µS
500µS
500µS - Advanced Features
500µS - Advanced Features
Special Purpose Sensor Modules
D15F
D20F
R15AF
R20AF
BC15
BC20
CC15
CC20
CC50
CC100*
AFM
Single 15A Fluorescent Dimmer Module
Single 20A Fluorescent Dimmer Module
Dual 15A Relay Module - Advanced Features
Dual 20A Relay Module - Advanced Features
Dual 15A Branch Circuit Breaker Module
Dual 20A Branch Circuit Breaker Module
Dual 15A Constant Circuit Breaker Module
Dual 20A Constant Circuit Breaker Module
Single 50A Constant Circuit Breaker Module
Single100A Constant Circuit Breaker Module
Air Flow Module
*Half-density modules use two dimmer slots
Control Modules
Model#
Description
CEM-48
CEM-96
Control Electronics Module (up to 48 dimmer)
Control Electronics Module (up to 96 dimmer)
Load Wiring Lug Sizes
Connection
Wire Size
15-50 amp and
fluorescent load lugs
Torque
14 - 10 AWG
8 AWG
4 - 6 AWG
14 - 8 AWG
6 - 4 AWG
2 - 1 AWG
1/0 - 2/0
16 - 6 AWG
14 - 8 AWG
4 - 6 AWG
2 - 3 AWG
100 amp load lugs
Neutral bus
Equipment grounding
35
40
45
75
110
150
180
25
75
110
150
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
Line Wiring Lug Sizes
Wire Size
4
1
1/0
3/0
250
500
800
-
6 AWG
2 AWG
2/0 AWG
4/0 AWG
450 MCM
750 MCM
1000 MCM
Torque
110
150
180
250
325
375
500
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
inch/lbs
RACK DIMENSIONS
Installation Rack dimensions
Model
*Racks loaded with D15, D20, D50AF and D100AF modules
are certified for 100k AIC
SR6
SR12
SR24
SR48
2-1.2
Height
inches
16.4
25.8
45.8
83.1
cm
42
66
116
211
Width
inches
14.6
14.6
14.6
14.6
cm
37
37
37
37
Depth
inches
13.3
13.3
16.8
22.8
cm
34
34
43
58
Sensor® Racks
Standard Series
ERROR MESSAGES
ETCLINK
Ambient Overtemp
Ambient Temp High
Ambient Temp Low
Backup Mismatch
Config Mismatch
Dimmer Error
Data Error Port (A,B)
Dimmer Overtemp
ETCLink Failed
Frequency Error
MOD> Removed
No Airflow
No Data Port (A,B)
Overtemp #
Phase (A, B or C) Error
Phase (A, B or C) Off
Phase Detect Fail
Processor Fail
System Error
Temp Sensor Stuck
Zero Crossing Error
Sensor CEM Racks
TYPICAL SYSTEM RISER DIAGRAM
Sensor Backup Station
B
Sensor Handheld
A
Express Console
2nd DMX port
for alternate
control input
A
Wire Types for Sensor CEM Racks with....
Device
Wire Type
DMX (XLR5)
Belden 9729
Device
A
Wire Type
Sensor Backup
Station
Sensor
Handheld
Express Console
ETCLink
Station
2-1.3
ETCLink (XLR6)
(1) Belden 9729
(2) #16 AWG Stranded Wires
B
ETCLink (XLR6)
B
ETCLink (XLR6)
(1) Belden 9729
(2) #16 AWG Stranded Wires
B
Sensor® Racks
Standard Series
RACK DIMENSIONS
Empty Dimmer Rack Weights
Model
Weight
lbs
36.0
45.0
11.0
107.0
17.0
188.0
31.0
SR6
SR12
SR12 Door*
SR24
SR24 Door*
SR48
SR48 Door*
Clearance
above fan
Shipping Weight
kgs
16.0
21.0
5.0
49.0
8.0
86.0
14.0
lbs
45.0
50.0
14.0
115.0
20.0
198.0
35.0
kgs
21.0
23.0
6.5
53.0
9.0
90.0
16.0
10.0"
25cm
SR48
*SR12, SR24, and SR48 Door ships separately
Installed Dimmer Rack Weights*
Model
Maximum Weight
lbs
71.0
115.0
261.0
493.0
SR6
SR12
SR24
SR48
kgs
33.0
53.0
119.0
224.0
Typical Weight
lbs
66.0
105.0
244.0
459.0
kgs
30.0
48.0
111.0
209.0
Clearance
above fan
10.0"
25cm
*Maximum — D20HR modules (5.7lbs/slot) Typical — D15 modules (5 lbs/slot)
SR24
Refer to module datasheets to calculate rack weight for other module types
Clearance
above fan
83.1"
211cm
10.0"
25cm
Clearance
above fan
45.8"
116cm
SR12
10.0"
25cm
SR6
25.8"
66cm
16.4"
42cm
Wall or
other
barrier
(all racks)
14.6"
37cm
14.6"
37cm
13.3"
34cm
6"
15cm
14.6"
37cm
13.3"
34cm
14.6"
37cm
16.8"
43cm
22.8"
58cm
17"
46cm
6"
15cm
17"
46cm
6"
15cm
17"
46cm
6"
15cm
17"
46cm
Electronic Theatre Controls
International • 3030 Laura Lane, P.O. Box 620979, Middleton, WI 53562-0979 • Tel: (+1) 608 831 4116 • Fax: (+1) 608 836 1736 • Toll free: 800 688 4116 • Toll free fax: 800 555 8912
Europe • 5 Victoria Industrial Estate, Victoria Road, London W3 6UU • Tel: +44 (0)20 8896 1000 • Fax: +44 (0)20 8896 2000
Asia • Room 605-606, Tower III Enterprise Square • 9 Sheung Yuet Road, Kowloon Bay • Kowloon, Hong Kong • Tel: (+852) 2799 1220 • Fax: (+852) 2799 9325
Web: www.etcconnect.com • Email: mail@etcconnect.com Copyright © 2001 Electronic Theatre Controls, Inc., All Rights Reserved. All product information and specifications subject to change.
Sensor ® products protected by U.S. Patent Numbers: 5,323,088, 5,352,958, and 6,002,563 European Number: 0603333 German Number: 69203609, US and International Patents Pending
7051L1013
2-1.4
0601US • Rev. B
Touch-Plate® Lighting Controls
CPS-16TK Time-Keeper
•
Simple to program via on-board keypad or using included
Windows ® based software and a PC com port.
•
Time-Keeper board mounts in top slot in CPS Lighting Control
panel – designed specifically for CPS.
•
16 channel output.
•
Outputs Momentary Pulses or Maintain (ON/OFF).
•
16 events per day per channel (16 momentary pulses or 8 ON
and 8 OFF times).
•
Astronomic Clock: Set events to Sunrise / Sunset.
•
Weekly Schedules may include single days, Mon-Fri, Weekend,
or All Week.
•
•
Holiday Schedules – 16 individual dates with 8 events per date.
“Year 2000” compliant.
•
Current schedule can be downloaded to a PC and backed up
using Time-Keeper Software.
•
Battery Backup.
•
Manual control of outputs via PC.
•
•
Depluggable Screw Terminals for easy connections.
Can control groups.
•
Automatically adjusts for Daylight Savings.
The Touch-Plate® Time-Keeper™ module is a member of
Touch-Plate’s Control Plus Series family of facility control
devices. The Time-Keeper provides sixteen timed electrical
control signals which may be used as inputs to the CPS-0008
through CPS-0040 control panels. The control signals may
be configured as maintained ON/OFF or momentary (pulse)
outputs at the hardware level.
With the Astronomic Clock, events may be scheduled to
occur at Sunrise/Sunset and with an offset if desired. The
clock automatically adjusts for Daylight Savings time, so
program maintenance is at a minimum.
The Time-Keeper Plus software allows configuring and
16:48:32 05/05
8” X 6” (same as CP8 control board)
storing of multiple Time-Keeper modules on a Windows ®
based PC. This greatly simplifies programming the TimeKeeper and provides a means of backing up the event settings
once they are programmed. With the upload feature of the
software, pre-programmed configurations can be easily
uploaded to the control panel in a fraction of the time of
manual programming. With the download feature, current
event programming of a control panel can be downloaded to
the PC for evaluation or update.
Touch-Plate® Lighting Controls
1830 Wayne Trace
Fort Wayne, IN 46803
Phone: 260-424-4323
Fax: 260-420-3651
®
Sales Support Email: sales@touchplate.com
World Wide Web: http://www.touchplate.com
ELECTRONIC THEATRE CONTROLS
Emergency Lighting Transfer System
ELTS Series
G E N E R A L I N F O R M AT I O N
O R D E R I N G I N F O R M AT I O N
ELTS
ETCs Emergency Lighting Transfer System (ELTS) switches
dimmed lights to emergency power if normal electricity fails.
APPLICATIONS Emergency lighting applications in UL and cUL
markets
School auditoriums
Theaters and concert halls
Themed retail or casino spaces
GENERAL
Full UL and cUL listing and approval for
emergency transfer
ANSI/UL 1008
ANSI/NFPA 110
ANSI/NFPA 70
Self-contained and distinct from other power
or control wiring
Continuous monitoring of Normal and
Alternate power
NEMA 1 rated cabinet
MECHANICAL
14 gauge welded steel cabinet
Key locked cabinet door
ELECTRICAL
Connect 20A or 50A circuits
20A circuits - up to 24
50A circuits - up to 8
Single or three phase power:
120/208V
120/240V
Cabinet Mounted Alternate power distribution
and branch circuit protection
Silver plated switch contacts
Contractor connections are convenient and
clearly marked
ACCESSORIES
Remote Control Keyswitch Station
Model#
Description
Three phase, 120/208 volt models
Small cabinet
ELTS 450 -3 -120
Four 50 amp circuits
ELTS 620 -3 -120
Six 20 amp circuits
ELTS 1220 -3 -120
Twelve 20 amp circuits
Large cabinet
ELTS 850 -3 -120
Eight 50 amp circuits
ELTS 1820 -3 -120
Eighteen 20 amp circuits
ELTS 2420 -3 -120
Twenty-four 20 amp circuits
Single phase, 120/240 volt models
Small cabinet
ELTS 450 -1 -120
Four 50 amp circuits
ELTS 620 -1 -120
Six 20 amp circuits
ELTS 1220 -1 -120
Twelve 20 amp circuits
Large cabinet
ELTS 850 -1 -120
Eight 50 amp circuits
ELTS 1820 -1 -120
Eighteen 20 amp circuits
ELTS 2420 -1 -120
Twenty-four 20 amp circuits
ELTS Accessory
3-4.1
Model#
Description
CS-ELTS
ELTS Remote Control Keyswitch Station
Emergency Lighting Transfer System
ELTS Series
S P E C I F I C AT I O N S
PHYSICAL
30"
76.2cm
Cabinet mounts to wall with four 3/8” bolts
System is self-contained and distinct from other
power or control wiring
Adjustable source voltage settings
Mode switching and delay timing has a range
of settings
Highly visible front panel system status LEDs
Normal Power On
Emergency Power On
Normal Power OK
Emergency Power OK
Generator Start
Fire Alarm Activated
Auxiliary Activation
Integral Emergency Power Distribution and
Branch Circuit Protection
Fire alarm activation by open circuit signal
Auxiliary activation by open circuit signal
MECHANICAL 14 gauge welded steel cabinet, rated NEMA 1
Key locked cabinet door
Continuous tightening three-point door latch
ETC Sensor Styling with fine-textured,
scratch-resistant epoxy paint
Front panel local control keyswitch
Cabinet mounted branch circuit breakers for
emergency power
ELECTRICAL
Single or three phase power
120/208V 175 amp maximum three phase
120/240V 250 amp maximum single phase
Continuous monitoring of Normal and
Emergency power
Mechanically held, UL 1008 rated
switch assemblies
Silver plated switch contacts will not weld at
rated RMS short-circuit currents
Transfer switch contacts are rated for mixed
loads including electric discharge and tungsten
filament lamps
Standard ELTS models have built-in Emergency
power distribution and 20 or 50 amp branch
circuit protection (ELTS models without
distribution or branch circuit protection
available by special order)
Contractor connections are made on convenient, clearly marked termination strips and
phase voltage lugs
OPTIONS
Up to ten Remote Control Keyswitch Stations
Discrete fed units (contact factory for details)
GENERAL
24.25"
61.6cm
9.4"
24cm
Electronic Theatre Controls Inc.
MODEL ELTS
AUTOMATIC TRANSFER SWITCH FOR EMERGENCY SYSTEMS
ISSUE NO. 934
Operational Current: 200A Max 3 Phase
Operational Voltage: 120/208v (3p+N+ )
Frequency: 50/60Hz.
NORMAL POWER
Short-circuit current: 10,000 AIC
STABLE
Electronic Theatre Controls Inc.
Middleton, WI
Made in USA
®
®
UL1008 Listed
EMERGENCY POWER
STABLE
NORMAL
OPERATION
EMERGENCY
OPERATION
GENERATOR
START
FIRE ALARM
TRANSFER SIGNAL
EMERGENCY
POWER
AUTO
NORMAL
POWER
AUXILIARY
TRANSFER SIGNAL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
C
55.2"
140.2cm
54"
137.2cm
Large Cabinet
30"
76.2cm
24.25"
61.6cm
9.4"
24cm
37.2"
94.5cm
36.0"
91.4cm
Small Cabinet
Electronic Theatre Controls
International • 3030 Laura Lane, P.O. Box 620979, Middleton, WI 53562-0979 • Tel: (+1) 608 831 4116 • Fax: (+1) 608 836 1736 • Toll free: 800 688 4116 • Toll free fax: 800 555 8912
Europe • 5 Victoria Industrial Estate, Victoria Road, London W3 6UU • Tel: +44 (0)20 8896 1000 • Fax: +44 (0)20 8896 2000
Asia • Room 605-606, Tower III Enterprise Square • 9 Sheung Yuet Road, Kowloon Bay • Kowloon, Hong Kong • Tel: (+852) 2799 1220 • Fax: (+852) 2799 9325
Web: www.etcconnect.com • Email: mail@etcconnect.com Copyright © 2001 Electronic Theatre Controls, Inc., All Rights Reserved. All product information and specifications subject to change.
Sensor® products protected by U.S. Patent Numbers: 5,323,088, 5,352,958, and 6,002,563 European Number: 0603333 German Number: 69203609, US and International Patents Pending
1093L1003
3-4.2
0601US • Rev. B