Fixture Type
APPROVAL
Lamp Type
Job Ref. / Location
STANDARD FEATURES
q Unique parallel lamp operation ensures that the fail-
ure of any LED will not extinguish legend illumination.
q Diffuse Exit Legend evenly illuminated.
q 1.7 lamp watts per Exit Sign.
q 100% light output regardless of mode of operation.
q Eliminates lamp replacements – long life L.E.D. lamps.
q Single, Double face or Total Universal (single/double).
q Standard 120/277 VAC input utilizing magnetic isolation transformer, optional 220 volt 50 HZ.
q 20 gauge steel construction with standard corrosion inhibitive White Powder Epoxy finish, or optional extruded aluminum frame – See optional colors.
q Universal pop-out Chevron style directional arrows.
q Red Stencil standard, Green optional.
q Custom Special Legends available, see separate data sheet.
q Optional Damp Environments (see Options).
SERIES LE12X, LE18X
• Energy Efficient LED Exit Sign with
Remote Capacity
• Commercial Grade Battery Operation
CHARGER/BATTERY
q Solid state, patented, POWER PULSE charger (Patent No. 4890004)
q Sealed lead calcium acid maintenance free battery – 10 year life expectancy
q Optional maintenance free nickel cadmium battery – 15 year life expectancy
q Battery emergency illumination - 90 minutes
q Low battery voltage disconnect, brownout, power-
on latch, solid state switch
q Temperature compensation
q Controls: Red LED power on, push to test switch, amber charge LED
Available with
SVS
DAMP LABEL
LISTED (Optional)
SELF VERIFIED SYSTEM
PERFORMANCE
OPTIONS
The outstanding lighting of the "LUMINATOR III" LED Exit is
achieved by utilizing an array of internal mounted high out-
put light emitting diodes. The entire exit legend is uniformly
illuminated in a soft even glow of light.
Item
Add Suffix
Self Verified System........................................................#–SVS
Conformal Coating for Damp Environments........................#–DL
24 Volt Fire Alarm Interface with Flasher..........................#–24F
24 Volt Fire Alarm Interface with flasher & Audio Alarm......#–24FB
Nickel Cadmium Battery.................................................#–NI
Polycarbonate Clear Protective Lens.................................#–PC
Pendant 12" Length (specify other length desired)..............#–P12
Tamperproof.................................................................#–TP
Voltmeter.....................................................................#–V
220 volt 50 Hz input............................................. #– 220V50HZ
Illumination in both the A.C. and emergency modes exceeds
the requirement of the NFPA-101 Life Safety Code and U.L.
Standard #924.
Optional Finishes..............................................See Reverse Side
SELECTION GUIDE
RED STENCIL LEGEND
Type /Mounting
Single Face Universal Mount (With Canopy)
Total Universal Single/Double Face (With Canopy)
LEAD CALCIUM BATTERY
NICKEL CADMIUM BATTERY (Optional)
9 Watts Remote Capacity
16 Watts
Remote Capacity
9 Watts
Remote Capacity
16 Watts
Remote Capacity
LE12X1CR
LE18X1CR
LE12X1CR - NI
LE18X1CR - NI
LE12XUR
LE18XUR
LE12XUR - NI
LE18XUR - NI
EX12.0
CDCRCA
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.
SERIES LE12X, LE18X
ACCESSORIES
MOUNTING OPTIONS
Item Catalog #
Remote Light Fixture
PAR 36 (6 Volt, 6 Watt)........................................ F3606
PAR 18 (6 Volt, 6 Watt)........................................ F1806
Weather Proof PAR 36 (6 Volt, 8 Watt) ........ F3608SBWP
Wire Guard..............................................................WG
Specify Suffix #
when ordering.
M1
M2
Width 4.5"
Plastic Polycarbonate Vandal Shields
Wall Mount ............................................................ PS1
Weather-proof (gasketed) wall mount.................... PS6N4X
End Mount.............................................................. PS4
Height 10"
M3
NOMINAL DIMENSIONS
Length 14.5"
Sign/Battery Pack.......12.25" x 12.25" x 2.25"
(31.1cm x 31.1cm x 5.7cm)
Canopy.......................4.5" x 5.75" x .5" (11.7cm x 14.6cm x 1.3cm)
SAVE INSTALLATION TIME!
Our exclusive "QUIK-E" mounting
knockouts allow you to mount to a
single gang or 4" octagon junction
box without removing the "J" box
screws.
ORDERING INFORMATION – BATTERY EXIT
Optional Finishes
OPTIONAL FINISHES:
B = Black with Brushed Aluminum Faceplate
BB = All Black
BZ = Dark Bronze
Options - Suffix to Cat.
# – 24F
Catalog Number
B
L
E18X 1C R
LED LAMPS
BATTERY EXIT:
E12X=9 Watt Remote Capacity E18X=16 Watt Remote Capacity TYPE OF MOUNTING:
1 = Single Face Wall Mount
1C = Single Face Universal Mount (with Canopy) 2 = Double Face Universal Mount (with Canopy)
U = Total Universal, Single/Double face mounting (with Canopy)
FACEPLATE COLOR (Special Legends - See separate "SIGNAGE" Data Sheet):
R = Red Stencil
G = Green Stencil
OPTIONS: # – F = Flasher
# – 24F = Fire Alarm Interface Flasher
# – FB = Flasher Beeper
# – 24FB = 24 Volt Fire Alarm Interface Flasher & Audio Alarm
# – V = Voltmeter
# – P12 = 12" Pendant (specify other lengths)
# – PC = Polycarbonate Protective Lens
# – 220V50HZ = 220 Volt 50 HZ input
# – NI = Nickel Cadmium Battery
# – TP = Tamperproof
All exits manufactured in accordance with U.L. standard 924, and meet or exceed
requirements as established by the National Electrical Code Article 700 and Life
Safety Code NFPA101. Specifications subject to change without notice.
EX12.0
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice: 800.342.0592 • fax: 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.
CDCRCA