Catalog Number
Notes
Type
FEATURES
INTENDED USE — Provides a minimum of 90 minutes of illumination for the
rated wattage upon loss of AC power. Ideal for applications requiring attractive
unit equipment with quick installation.
CONSTRUCTION — White, compact, low-profile contemporary design. Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant and
corrosion-proof. UL94V-O flame rating. UV-stable resin resists discoloration from
natural and man-made light sources.
Two 5.4W wedge-based krypton lamps offer 32 percent more light output than
standard incandescent lamps.
Thermoplastic Emergency Light
ELM2
Patented MR24, multi-faceted reflector significantly improves photometric performance – 60 to 100 percent more light delivered to path of egress.
US Patent No. D484,272
Dual-voltage input capability (120/277V). Edge connectors on printed circuit
board ensure long-term durability.
Lead-Calcium Battery
Low-profile, integrated test switch/pilot light. Easily visible bright red status
indicator.
Unique track-and-swivel arrangement permits full range of direction of lamp head
adjustment. Universal J-box mounting pattern. Tool-less access for maintenance.
Flexible conduit entry provision on top of the unit. Ceiling mount standard.
U.S. Patent No. D473,672
BATTERY — Sealed, maintenance-free lead-calcium battery provides 12W rated
capacity. Automatic 48-hour recharge after a 90-minute discharge.
Low-voltage disconnect prevents excessively deep discharge that can permanently damage the battery.
Single-circuit battery connection. Galvanized battery retaining clip.
ELECTRONICS — Current-limiting charger maximizes battery life and minimizes
energy consumption. Provides low operating costs.
Short-circuit protection — current-limiting charger circuitry protects printed
circuit board from shorts.
Thermal protection senses circuitry temperature and adjusts charge current to
prevent overheating and charger failure.
Thermal compensation adjusts charger output to provide optimum charge voltage relative to ambient temperature.
Regulated charge voltage maintains constant-charge voltage over a wide range
of line voltages. Prevents over/undercharging that shortens battery life and
reduces capacity.
DIAGNOSTICS (SD option) — Single multi-chromatic LED indicator to display
two-state charging, test activation and three-state diagnostic status.
Test switch provides manual activation of 30- second diagnostic testing for ondemand visual inspection.
Self-diagnostic testing for five minutes every 30 days and 30 minutes every
six months.
Diagnostic evaluation of lamp, AC to DC transfer, charging and battery condition.
Brownout protection is a standard feature of self-diagnostics.
Continuously monitors AC functionality.
AC/LVD reset allows battery connection before AC power is applied and prevents battery damage from deep discharge.
Automatic test is easily postponed for eight hours by activating manual test
switch.
LISTING — UL Listed and NOM Certified (standard). Meets UL 924, NFPA 101,
NFPA 70-NEC and OSHA illumination standards. Meets Mexican standards.
Brownout protection is automatically switched to emergency mode when supply voltage drops below 80 percent of nominal.
WARRANTY — Three-year total customer satisfaction warranty. For details, see
the Product Selection Guide.
Filtered charger input minimizes charge voltage ripple and extends battery life.
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
Example: ELM2
ELM2
Family
ELM2
Options
B
DL
SD
Black housing1
Damp location listed (10oC to 40oC)1
Self-diagnostics
Accessories
Order as separate item.
NOTES:
1 Black unit not available with damp location option.
Emergency
ELA VS Thermoplastic vandal shield
ELA WGST Wireguard
Sheet #: ELM2
QMUE-120
ELM2 QUANTUM® Thermoplastic Emergency Light
SPECIFICATIONS
MOUNTING
ELECTRICAL
Primary Circuit
All dimensions are inches (millimeters).
Shipping weight: 4.0 lbs. (1.8 kgs.)
Type
AC Input
Amps Watts
.11
1.2
Volts
120
Output
Volts
ELM2
6
277
.12
11.5"
(292.1)
Watts Output
1-1/2hrs. 2hrs.
12
9
5"
(127)
1.5
* Half-hour and one-hour run time not applicable for U.S. product.
BATTERY
3.75"
(95.25)
Sealed Lead-Calcium
Voltage
Shelf
life1
Expected
life1
Maintenance
Optimum
temperature2
6
6 mos.
5-8 yrs.
none3
60-90°F
(16-32°C)
Mounting Plate
1.91"
(48.5)
5"
(127)
1 At 77°F (25°C).
2 Optimum ambient temperature range where unit will provide capacity for 30 to 90
minutes. Higher and lower temperatures affect life and capacity. Consult factory for
detailed information.
3 Periodic system status test recommended.
2.5"
(63.5)
3.91"
(99.3)
5.63"
(143)
3.5"
(88.9)
11.5"
(292.1)
3.75"
(95.25)
12.5"
(317.5)
FIXTURE PERFORMANCE
LAMP PHOTOMETRICS
LTL10586
MR24 K0606
6-volts, 5.4-watts krypton
Center-to-Center
Spacing*
yields 20'
HORIZONTAL
6
4
Single-Unit
Coverage*
yields 18'
2
1
0
0.5
0.3
0.1 FC min.
2
1 FC average
4
6
VERTICAL
6
4
18 ft.
2
1
0
0.5
6-Foot Path of Egress
0.3
6 ft.
2
4
6
10
20
Ft.
Center-to-Center
Spacing*
yields 25'
SPACING/COVERAGE GUIDE
MR24 K0606
Lamp
Path of Egress
3'-wide
6'-wide
Center-to-Center
Spacing
25'
20'
Single-Unit
Coverage
24'
18'
0.1 FC min.
Single-Unit
Coverage*
yields 24'
1 FC average
24 ft.
3-Foot Path of Egress
3 ft.
* Meets Life Safety Code standard minimum illuminance of 0.1 FC and average illuminance
of 1.0 FC. Assumes open space with no obstructions, mounting height: 7.5’, ceiling height: 9’,
and reflectances: 80/50/20. Analysis based on independently tested photometrics.
Lithonia Lighting
Sheet #: ELM2
© 1991 Acuity Brands Lighting, Inc., Rev. 6/25/07
Emergency Lighting Systems
One Lithonia Way, Conyers, GA 30012
Phone: 800-334-8694
www.lithonia.com
EMERGENCY LIGHTING UNITS
Contemporary Thermoplastic Emergency Lighting Units
®
Quantum
ELM/ELM2
Quick-Mount ®
Intended Use
Provides a minimum of 90 minutes of illumination for the rated wattage upon loss of AC power. Ideal for applications requiring attractive unit
equipment with quick installation.
Features
White, compact, low-profile contemporary design with high-impact thermoplastic housing
that is impact-resistant, corrosion-proof and UVstable to resist discoloration from artificial light
sources or sunlight.
Maintenance-free lead-calcium battery.
ELM
ELM2
to the path of egress. Dual-voltage input capability (120/277V). Edge connectors on printed circuit board ensure long-term durability.
Unique track-and-swivel design permits full
range of lamp head adjustment (ELM2). Universal
J-box mounting pattern. Tool-less access for
maintenance. Flexible conduit entry provision
on top of the unit.
Quick-Mount® snap-together construction permits installation in three easy steps in less than
three minutes.
Vandal-resistant ELA VS polycarbonate shield
available.
Two 5.4W wedge-based krypton lamps offer 32
percent more light output than standard incandescent lamps.
Wall or ceiling mounted.
Patented MR24, multi-faceted reflector (ELM2)
significantly improves photometric performance; 60 to 100 percent more light delivered
UL Listed (standard). CSA Certified or NOM Certified (see Options).
Listings
Example: ELM2 SD
Ordering Information
Options
Family
ELM 6V,12W
ELM2 6V,12W
Accessories
(Order separately)
ELA VS Polycarbonate vandal shield
ELA WGST Wireguard
SD
B
DL
CSR
CSA
NOM
Type
See page11 for details about LightQuick XD.
Description
ELM
ELM2
SD1,2 B1,2,3 DL1,3 CSR1,4 CSA5 NOM1,2
■
ELM
LITHONIA EMERGENCY
ELM2
438
Drawings are for dimensional detail only and may not represent actual mechanical
configuration. Dimensions are shown in inches (millimeters) unless otherwise
noted.
ELM
ELM2
Width: 11-1/2(292)
Width: 12-1/2(317)
Depth: 3-3/4 (95.25)
Depth: 3-3/4 (95.25)
Height: 5(127)
Height: 5(127)
Weight: 3.0 lbs. (1.4 kgs.)
Weight: 4.0 lbs. (1.8 kgs.)
Type
ELM2
11-3/4(298)
2-3/8 (60)
5(127)
3.0 lbs. (1.4 kgs.)
ELM2 CSA
Width:
Depth:
Height:
Weight:
■
■
■
■
■
■
■
Lamp
Number
K0606
5.4
MR24 K0606
5.4
Volts
120
277
120
277
AC Input
Amps
.11
.12
.11
.12
Electrical Application Data
Output
Watts
Volts
1-1/2 hrs
1.2
6
12
1.5
1.2
6
12
1.5
ELM/ELM2 Quick-Mount® Installation:
16-1/4(412)
4(102)
5 -1/8 (130)
4.0 lbs. (1.8 kgs.)
Watt/
Lamp
■ Option available
(blank) Option not available
ELM
ELM CSA
Width:
Depth:
Height:
Weight:
Express delivery products.
Self-diagnostics1,2
Black housing1,2,3
Damp location1,3
8-foot cordset attached (120V ELM only)1,4
CSA Certified5
NOM Certified1,2
1) Feed leads through mounting plate and make
connections to AC power supply.
2) Align mounting plate on J-box and secure with
screws.
3) Connect battery and snap housing onto mounting plate.
www.lithonia.com,keyword: ELM
Output Watts
2 hrs
3 hrs
4 hrs
—
—
—
—
—
—
NOTES:
1 Not available with CSA option.
2 Available on ELM2 only.
3 Black ELM2 not available with damp location option.
4 Available on ELM only.
5 See CSA diagram for special housing dimensions.
For additional lamp heads, remote fixtures, options and accessories, see pages
449-451.
For application guidelines and fixture performance data, see pages 455 and 458.
PSG9