List of Products 2004
1
Zoom to fit width
Zoom to fit page
Contents.
Product Type
Delivery Time
Page
20 Watt Halogen (3000K) and 42 Watt Halogen (2900K). IP20.
1-3 days, depending on quantity.
3
Light Generators, Interior.
75 Watt Halogen (3000K). Low Noise. IP20.
1-3 days, depending on quantity.
3
75 Watt Halogen (3000K) and 100 Watt Halogen (3400K). IP20.
1-3 days, depending on quantity.
4
150 Watt Metal Halide CDM-SA/R (4200K). IP20.
1-3 days, depending on quantity.
4
Colour and Synchron. 150 Watt Metal Halide CDM-SA/R. IP20.
1-3 days, depending on quantity.
4
DMX Systems. 150 Watt Metal Halide CDM-SA/R. IP20.
1-3 days, depending on quantity.
5
75 Watt Halogen (3000K). IP44.
1-3 days, depending on quantity.
5
DMX Systems. 75 Watt Halogen. IP44.
1-3 days, depending on quantity.
5
150 Watt Metal Halide CDM-SA/R. IP44.
1-3 days, depending on quantity.
5
DMX Systems. 150 Watt Metal Halide CDM-SA/R. IP44.
1-3 days, depending on quantity.
6
1-3 days, depending on quantity.
Upon agreement.
6
1-3 days, depending on quantity.
10
Light Generators, Exterior.
Accessories for Light Generators.
Accessories for Light Generators.
NOTE: Delivery time on special colour wheel.
Fiber Harnesses.
Standard Fiber Harnesses. PMMA.
Fiberlight Flex Arm. PMMA.
1-3 days, depending on quantity.
10
Standard Fiber Harnesses. Glass.
1-3 days, depending on quantity.
10
Special Fiber Harnesses. Endlight glass.
Current week + 10 working days.
11
Special Fiber Harnesses. Endlight PMMA.
Current week + 10 working days.
12
Special Fiber Harnesses. Sidelight PMMA.
Current week + 10 working days.
13
Accessories for PMMA Sidelight and Fiber Harnesses.
Current week + 10 working days.
13
Accessories for Fiber Harnesses.
Current week + 10 working days.
14
Do It Yourself Components for PMMA Sidelight.
Current week + 10 working days.
14
1-3 days, depending on quantity.
15
Sirius and Pool.
1-3 days, depending on quantity.
19
Compas and Compas MAX.
1-3 days, depending on quantity.
20
Fittings, Interior.
Fittings, Interior.
Fittings, Exterior.
Accessories for Compas and Compas MAX.
1-3 days, depending on quantity.
21
Bollards. Landscape.
1-3 days, depending on quantity.
22
Beespot and Eye-ball.
1-3 days, depending on quantity.
23
Conduit Systems.
XPO.
4 to 6 weeks or upon agreement.
24
Brass.
4 to 6 weeks or upon agreement.
26
Demonstration Material.
1-3 days, depending on quantity.
26
Standard Sauna Set and Basic Set. Glass.
1-3 days, depending on quantity.
27
Standard Starlight Ceiling Sets and Basic Sets. PMMA.
1-3 days, depending on quantity.
27
Fiber Light Sets.
Delivery times for special light generators and special fittings: Upon agreement.
Delivery Terms: Ex works, NLS 95E.
All rights reserved.
Any reproduction of this list of products prohibited, unless permitted by Roblon Fiber Optics.
All data and illustrations are subject to change without any notice.
XPO, Beespot, Pool, Compas, Eclipse, Circle H, Design: Schmelling Industriel Design.
2
prev
Print
next
Zoom to fit width
Zoom to fit page
Light Generators, 20 Watt Halogen (3000K) and 42 Watt Halogen (2900K). IP20.
Illustration
Product type / Light port
Ø
dB
(A)
Trafo1
Voltage
LxWxH (mm)
Weight (kg)
FL 20-2.
20 W (standard halogen lamp). White light.
For decoration and starry sky.
Not for lighting purposes!
Natural cooling (no fan).
Ø9
0
E
230V
50/60Hz
172x90x91
1.2
0120 0001
FL 2001-1.
White light. For glass.
Ø9
26
E
230V
50/60Hz
162x98x77
0.85
0120 0101
FL 2001-1.
White light. For PMMA.
Ø9
26
E
230V
50/60Hz
162x98x77
0.85
0120 0121
FL 2001-1D.
White light. For glass. Mechanical dimmer.
Ø9
26
E
230V
50/60Hz
171x98x77
0.85
0120 0111
171x98x77
0.85
0120 0131
0150 0242
FL 2001-1D. White light.
For PMMA. Mechanical dimmer.
Ø9
26
E
230V
50/60Hz
Ø9
0
I
230V
50/60Hz
214x141x126
3
Item number
FL 42.
White light. For glass.
Natural cooling (no fan).
1.
Transformer: E = Electronic, I = Iron core.
Lamp life, 20 W: E = Average 4000 hours.
Lamp life, 42 W: E = Average 6000 hours, I = 4000 hours.
Light Generators, 75 Watt Halogen (3000K). Low noise. IP20.
Illustration
Product type / Light port
FL 75.
White light.
FL 75.
White light. For electrical dimming.
Ø
dB
(A)
Trafo2
Voltage
LxWxH (mm)
Weight (kg)
Ø9
20
I
230V
50/60Hz
230x148x164
3.8
0150 0178
I
230V
50/60Hz
230x148x164
3.8
0150 0300
I
230V
50/60Hz
230x148x164
3.8
0150 0179
230x148x164
3.8
0150 0301
Ø9
FL 75.
White light.
Ø28
20
20
Item number
FL 75.
White light. For electrical dimming.
Ø28
20
I
230V
50/60Hz
FL 75E.
8-colour wheel1 with switch.
Ø9
20
I
230V
50/60Hz
239x148x164
3.9
0150 0183
FL 75E.
8-colour wheel1 for external on/off.
Ø9
20
I
230V
50/60Hz
239x148x164
3.9
0150 0302
FL 75E.
8-colour wheel1 with switch.
Ø28
20
I
230V
50/60Hz
239x148x164
3.9
0150 0180
FL 75E.
8-colour wheel1 for external on/off.
Ø28
20
I
230V
50/60Hz
239x148x164
3.9
0150 0303
I
230V
50/60Hz
239x148x164
3.9
0150 0182
I
230V
50/60Hz
239x148x164
3.9
0150 0304
FL 75E.
Sparkling wheel with switch.
Ø28
FL 75E.
Sparkling wheel for external on/off.
Ø28
20
20
1.
Colours and colour order: Mauve-yellow-green-orange-light blue-red-blue-white (clear).
Transformer: E = Electronic, I = Iron core.
Lamp life: I = Average 4000 hours.
2.
prev
Print
next
3
Zoom to fit width
Zoom to fit page
Light Generators, 75 Watt Halogen (3000K) and 100 Watt Halogen (3400K). IP20.
Illustration
Product type / Light port
Ø
dB
(A)
Trafo1
Voltage
LxWxH (mm)
Weight (kg)
Item number
FL 2002-75.
White light. 75 W.
Incl. adapter for Ø9.
Ø9 /
Ø28
29
E
230V
50/60Hz
196x103x86
0.85
0121 0001
FL 2002-100.
White light. 100 W.
Generates 15-20% more light than a 75 W
with a >90% filled Ø28 fiber harness.
Ø28
29
E
230V
50/60Hz
196x103x86
0.85
0121 0000
1.
Transformer: E = Electronic.
Lamp life, 75 W: E = Average 6000 hours.
Lamp life, 100 W: E = Average 2500 hours.
Light Generators, 150 Watt Metal Halide CDM-SA/R (4200K). IP20.
Illustration
Ø
dB
(A)
Trafo2.
Voltage
LxWxH (mm)
Weight (kg)
Ø28
29
E
100-240V
50/60Hz
264x167x110
N/A
0161 0000
M
230V
50Hz
414x234x160
5.5
0160 0143
414x234x160
4.4
0160 0183
Product type / Light port
Item number
FL 150-3 “Global”.
White light. With cable.
Accessories: Ventilation bracket, see
»Accessories for Light Generators«.
FL 150-2B.
White light. With cable.
Ø28
32
FL 150-2B.
White light. With cable.
Ø28
32
E
230/240V
50/60Hz
FL 150-2F.
6-colour wheel1 for external on/off.
Ø28
32
M
230V
50Hz
414x234x160
5.5
0160 0144
FL 150-2F.
6-colour wheel1 for external on/off.
Ø28
32
E
230/240V
50/60Hz
414x234x160
4.4
0160 0184
FL 150-2F.
Sparkling wheel for external on/off.
Ø28
32
M
230V
50Hz
414x234x160
5.5
0160 0152
E
230/240V
50/60Hz
414x234x160
4.4
0160 0192
FL 150-2F.
Sparkling wheel for external on/off.
Ø28
32
1.
Colours and colour order: Green-white (clear)-yellow-red-blue-orange.
Ballast: M = Magnetic ballast, E = Electronic ballast.
Lamp life: Average 6000 hours.
2.
Light Generators, Colour and Synchron. 150 Watt Metal Halide CDM-SA/R. IP20.
Illustration
Ø
dB
(A)
Trafo2.
Voltage
LxWxH (mm)
Weight (kg)
FL 150-2C.
Colour and Synchron. 6-colour wheel1.
Ø28
32
M
230V
50Hz
414x234x160
5.5
0160 0150
FL 150-2C.
Colour and Synchron. 6-colour wheel1.
Ø28
32
E
230/240V
50/60Hz
414x234x160
4.4
0160 0190
Product type / Light port
Signal Cable for DMX and Synchron.
Length 2.5 m. Incl. 2 plugs.
9903 0056
Signal Cable for DMX and Synchron.
Length 5 m. Incl. 2 plugs.
9903 0052
Signal Cable for DMX and Synchron.
Length 10 m. Incl. 2 plugs.
9903 0057
Signal Cable for DMX and Synchron.
Length 11-50 m. Incl. 2 plugs. Please state required length.
9903 0058
Signal Cable for DMX and Synchron.
Length 51-100 m. Incl. 2 plugs. Please state required length.
9903 0059
Line termination, female.
9903 0066
Line termination, male.
9903 0065
1.
Colours and colour order: Green-white (clear)-yellow-red-blue-orange.
Ballast: M = Magnetic ballast, E = Electronic ballast.
Lamp life: Average 6000 hours.
2.
4
Item number
prev
Print
next
Zoom to fit width
Zoom to fit page
Light Generators, DMX Systems. 150 Watt Metal Halide CDM-SA/R. IP20.
Illustration
Ø
dB
(A)
Trafo2.
Voltage
LxWxH (mm)
Weight (kg)
Ø28
32
M
230V
50Hz
414x234x160
5.5
0160 0141
E
230/240V
50/60Hz
414x234x160
4.4
0160 0181
M
230V
50Hz
414x234x160
5.5
0160 0142
E
230/240V
50/60Hz
414x234x160
4.4
0160 0182
414x234x160
5.5
0160 0140
414x234x160
4.4
0160 0180
Product type / Light port
FL 150-2C DMX. DMX-controllable.
6-colour wheel1.
FL 150-2C DMX. DMX-controllable.
6-colour wheel1.
Ø28
FL 150-2C DMX. DMX-controllable.
6-step dimmer.
Ø28
FL 150-2C DMX. DMX-controllable.
6-step dimmer.
Ø28
32
32
32
FL 150-2C DMX. DMX-controllable.
6-colour wheel1 and 6-step dimmer.
Ø28
32
M
230V
50Hz
FL 150-2C DMX. DMX-controllable.
6-colour wheel1 and 6-step dimmer.
Ø28
32
E
230/240V
50/60Hz
Item number
DMX 512 - LineBacker control unit.
Control unit for adjustment of colour and light in DMX-light generators.
0160 0300
DMX 512 - ALCORN control unit.
Advanced control unit. Similar to LineBacker, but PC programmable with 1-16 programmes.
0160 0301
Splitter. Y-distributor for cables in a DMX system.
Used for shortening cable distance between light generators, if these are placed in different
directions. Purpose: To reduce cabling.
0160 0310
Signal Cable for DMX and Synchron.
Length 2,5 m. Incl. 2 plugs.
9903 0056
Signal Cable for DMX and Synchron.
Length 5 m. Incl. 2 plugs.
9903 0052
Signal Cable for DMX and Synchron.
Length 10 m. Incl. 2 plugs.
9903 0057
Signal Cable for DMX and Synchron.
Length 11-50 m. Incl. 2 plugs. Please state required length.
9903 0058
Signal Cable for DMX and Synchron.
Length 51-100 m. Incl. 2 plugs. Please state required length.
9903 0059
Line termination. male.
9903 0065
Programming of DMX-control unit.
Per hour (minimum 1 hour).
9903 0070
1.
Colours and colour order: Green-white (clear)-yellow-red-blue-orange.
Ballast: M = Magnetic ballast, E = Electronic ballast.
Lamp life: Average 6000 hours.
2.
Light Generators, Exterior. 75 Watt Halogen (3000K). IP44.
Illustration
Product type / Light port
FL 75 XT B.
White light.
FL 75 XT F.
6-colour wheel1 for external on/off.
Ø
Trafo2
Voltage
LxWxH (mm)
Weight (kg)
Ø28
E
230/240V
50/60Hz
350x250x160
8.5
0150 0350
E
230/240V
50/60Hz
350x250x160
8.5
0150 0351
E
230/240V
50/60Hz
350x250x160
8.5
0150 0353
Ø28
FL 75 XT C.
6-colour wheel1. Colour and Synchron.
Ø28
Signal Cable.
Cable between DMX and Synchron light generators. Please state required length.
Item number
9903 0055
1.
Colours and colour order: Green-white (clear)-yellow-red-blue-orange.
Transformer: E = electronic.
Lamp life: Average 6000 hours.
2.
prev
Print
next
5
Zoom to fit width
Zoom to fit page
Light Generators, Exterior. DMX Systems. 75 Watt Halogen. IP44.
Illustration
Product type / Light port
Ø
Trafo2.
Voltage
LxWxH (mm)
Weight (kg)
Ø28
E
230/240V
50/60Hz
350x250x160
8.5
Item number
FL 75 XT C DMX. DMX-controllable.
6-colour wheel1.
0150 0352
DMX 512 - LineBacker control unit.
Control unit for adjustment of colour and light in DMX-light generators.
0160 0300
DMX 512 - ALCORN control unit.
Advanced control unit. Similar to LineBacker, but PC programmable with 1-16 programmes.
0160 0301
Splitter. Y-distributor for cables in a DMX system.
Used for shortening cable distance between light generators, if these are placed in different
directions. Purpose: To reduce cabling.
0160 0310
Signal Cable.
Cable between DMX and Synchron light generators. Please state required length. Per metre.
9903 0055
Signal Cable for DMX and Synchron.
From DMX control unit to light generator. Length 2,5 m. Incl. 2 plugs.
9903 0056
Signal Cable for DMX and Synchron.
From DMX control unit to light generator. Length 5,0 m. Incl. 2 plugs.
9903 0052
Signal Cable for DMX and Synchron.
From DMX control unit to light generator. Length 10 m. Incl. 2 plugs.
9903 0057
Signal Cable for DMX and Synchron.
From DMX control unit to light generator. Length 11-50 m. Incl. 2 plugs. Please state required length.
9903 0058
Signal Cable for DMX and Synchron.
From DMX control unit to light generator. Length 51-100 m. Incl. 2 plugs. Please state required length.
9903 0059
1.
Colours and colour order: Green-white (clear)-yellow-red-blue-orange.
Transformer: E = electronic.
Lamp life: Average 6000 hours.
2.
Light Generators, Exterior. 150 Watt Metal Halide CDM-SA/R. IP44.
Illustration
Product type / Light port Ø
Trafo2
Voltage
LxWxH (mm)
Weight (kg)
Item number
FL 150 XT.
White light. 4200K.
For exterior placement.
Ø28
M
230V
50Hz
400x350x200
15
0160 0211
FL 150 XT-E.
6-colour wheel1 for external on/off.
For exterior placement.
Ø28
M
230V
50Hz
400x350x200
15
0160 0210
Ventilation bracket.
For connection to Ø54 mm ventilator flex tubes.
Postmounting not possible! Must be ordered with light generator. No extra charge.
9904 0200
Mounting rack for FL 150 XT.
Rack for separate mounting of light generator.
Galvanized steel. Incl. cover plate and screws.
0160 0360
Cylinder lock for FL 150 XT.
Metal security lock. Incl. 2 keys.
0160 0370
1.
Colours and colour order: Green-white (clear)-yellow-red-blue-orange.
Ballast: M = Magnetic ballast.
Lamp life: Average 6000 hours.
Placement in well:
Minimum 0,5 m³ with minimum depth of 1.000 mm. By well < 0.5 m³ direct fresh air supply and outlet from light generator to the open is required.
Light generator must be mounted with ventilation bracket for connection to Ø54 mm ventilator flex tubes.
Order light generator with ventilation bracket - No extra charge!
2.
6
prev
Print
next
Zoom to fit width
Zoom to fit page
Light Generators, Exterior. DMX Systems. 150 Watt Metal Halide CDM-SA/R. IP44.
Illustration
Ø
Trafo2.
Voltage
LxWxH (mm)
Weight (kg)
FL 150 XT DMX. DMX-controllable.
6-colour wheel1. For exterior placement.
Ø28
M
230V
50Hz
400x350x200
15
0160 0201
FL 150 XT DMX. DMX-controllable.
6-step dimmer. For exterior placement.
Ø28
M
230V
50Hz
400x350x200
15
0160 0202
FL 150 XT DMX. DMX-controllable.
6-colour wheel1 and 6-step dimmer.
For exterior placement.
Ø28
M
230V
50Hz
400x350x200
15
0160 0200
Product type / Light port
Item number
DMX 512 – LineBacker control unit.
Control unit for adjustment of colour and light in DMX-light generators.
0160 0300
DMX 512 - ALCORN control unit.
Advanced control unit. Similar to LineBacker, but PC programmable with 1-16 programmes.
0160 0301
Splitter. Y-distributor for cables in a DMX system.
Used for shortening cable distance between light generators, if these are placed in different
directions. Purpose: To reduce cabling.
0160 0310
Plug set.
From DMX control unit to light generator FL150XT. Incl. mounting. Order with signal cable 9903 0055.
9903 0050
Plug set.
From light generator to light generator FL150XT. Incl. mounting. Order with signal cable 9903 0055.
9903 0051
Signal Cable.
Cable between DMX and Synchron light generators. Please state required length. Per metre.
9903 0055
Programming of DMX-control unit.
Per hour (minimum 1 hour).
9903 0070
Ventilation bracket.
For connection to Ø54 mm ventilator flex tubes.
Postmounting not possible! Must be ordered with light generator. No extra charge.
9904 0200
Mounting rack for FL 150 XT.
Rack for separate mounting of light generator.
Galvanized steel. Incl. cover plate and screws.
0160 0360
Cylinder lock for FL 150 XT.
Metal security lock. Incl. 2 keys.
0160 0370
1.
Colours and colour order: Green-white (clear)-yellow-red-blue-orange.
Ballast: M = Magnetic ballast.
Lamp life: Average 6000 hours.
Placement in well:
Minimum 0,5 m³ with minimum depth of 1.000 mm. By well < 0.5 m³ direct fresh air supply and outlet from light generator to the open is required.
Light generator must be mounted with ventilation bracket for connection to Ø54 mm ventilator flex tubes.
Order light generator with ventilation bracket - No extra charge!
2.
Accessories for Light Generators.
Illustration
Product type
Item number
Philips 20 Watt.
20 W standard halogen lamp. 3000K. Halogen 12 Volt. (Philips no. 14612).
6512 2040
Roblon 93.
42 W fiber optics lamp. 2900K. Halogen 12 Volt. (Philips no. 13861).
6512 4200
Roblon 95.
75 W fiber optics lamp. 3000K. Halogen 12 Volt. (Philips no. 14515).
6512 7595
Philips 100 Watt.
100 W fiber optics lamp. 3400K. Halogen 12 Volt. (Philips no. 6834/25H FO).
6512 9905
150 Watt CDM-T.
150 W metal halide lamp without reflector. 3000K.
6515 0000
150 Watt HQI-R.
150 W metal halide lamp with reflector. 4200K.
6515 0002
150 Watt CDM SA/R.
150 W metal halide lamp with reflector. 4200K.
6515 0005
prev
Print
next
7
Zoom to fit width
Zoom to fit page
Accessories for Light Generators.
Illustration
Product type
Item number
Transformer.
For FL 2001 light generators.
6800 2121
Fan.
For FL 2001 light generators.
6406 0120
Fan.
For FL 75 light generators.
6408 0225
Fan.
For FL 150 M light generators with CDM-T lamp (0160 0115 and 0160 0117).
6412 0223
Fan.
For FL 150-2.
6412 0225
Fan.
For FL 150 XT (complete).
6418 0220
Fan.
For FL 150-3.
3100 0046
Motor for FL 75.
Motor for 75 W models with colour wheel or sparkling wheel.
6400 1220
Ventilation bracket for FL 150-3.
For connection to Ø100 mm ventilator flex tube, in order to divert the exhaust air from the
light generator.
7800 0505
Standard 8-colour wheel for FL 75.
Colours and colour order: Mauve-yellow-green-orange-light blue-red-blue-white (clear).
Special colour wheel for FL 75.
Up to 8 colours can be combined according to requirements
(see colour codes).
Code:
When ordering, state colour code, order and number of
colours!
(1-8 colours per wheel).
Mauve
Yellow
Green
Orange
Light Blue
Red
Blue
White
5100 0050
5100 0001
5100 0002
5100 0003
5100 0004
5100 0005
5100 0006
5100 0007
5100 0008
»Any colour you like (LEE)« 6-colour wheel for FL 75.
When ordering, state colour code and colour order.
Colour code in accordance with Lee »Numeric Edition« - www.leefilters.com.
5100 0150
Standard 6-colour wheel for FL 75 XT, FL 75 XT DMX, FL 150-2 and FL 150-2C DMX.
Colours and colour order: Green-white-yellow-red-blue-orange.
Special colour wheel for
FL 75 XT, FL 75 XT DMX, FL 150-2 and FL 150-2C DMX.
Up to 6 colours can be combined according to requirements
(see colour codes).
When ordering, state colour code, order and number of
colours! (1-6 colours per wheel).
Red
Blue
Green
Orange
Yellow
White
5100 0078
5100 0060
5100 0061
5100 0062
5100 0063
5100 0064
5100 0067
5100 0073
»Any colour You like (LEE)« 6-colour wheel for FL 75 XT, FL 75 XT DMX, FL 150-2, FL 150-2C
DMX. When ordering, state colour code and colour order.
Colour code in accordance with Lee »Numeric Edition« - www.leefilters.com.
5100 0152
Standard 6-colour wheel for FL 150 XT, OM, OME and DMX (1999-2002).
Colours and colour order: Green-white-yellow-red-blue-orange.
5100 0070
Special colour wheel for FL 150 XT, OM, OME and DMX
(1999-2002).
Up to 6 colours can be combined according to requirements
(see colour codes).
When ordering, state colour code, order and number of
colours! (1-6 colours per wheel).
8
Code:
5100 0053
Code:
Red
Blue
Green
Orange
Yellow
White
5100 0060
5100 0061
5100 0062
5100 0063
5100 0064
5100 0067
5100 0052
»Any colour You like (LEE)« 6-colour wheel for FL 150 XT, OM, OME and DMX (1999-2002).
When ordering, state colour code and colour order.
Colour code in accordance with Lee »Numeric Edition« - www.leefilters.com.
5100 0151
Sparkling wheel for FL 75.
To obtain a “starry effect”.
Random blocking of the light creates a sparkling effect.
Stainless steel. Ø100 mm.
5100 0030
Sparkling wheel for FL 75 XT and FL 150-2.
To obtain a “starry effect”.
Random blocking of the light creates a sparkling effect.
Stainless steel. Ø100 mm.
5100 0074
prev
Print
next
Zoom to fit width
Zoom to fit page
Accessories for Light Generators.
Illustration
Product type
Item number
Dicroic colour filter for FL 2001.
Mounting bracket included.
Dicroic colour filter for FL 42 and FL 75.
Mounting bracket included.
Dicroic colour filter for FL 150-2. (IP20).
Mounting bracket included.
Dicroic colour filter for FL 150 XT (IP44).
Mounting bracket included.
Dicroic colour filter for FL 150-3 (IP20).
Yellow
7800 0270
Green
7800 0271
Blue
7800 0272
Red
7800 0273
Yellow
7800 0260
Green
7800 0261
Blue
7800 0262
Red
7800 0263
Yellow
7800 0280
Green
7800 0281
Blue
7800 0282
Red
7800 0283
Yellow
7800 0290
Green
78000291
Blue
7800 0292
Red
7800 0293
Yellow
7800 0190
Green
7800 0191
Blue
7800 0192
Red
7800 0193
Colour reduction filter -900K. For FL 150 (IP20).
Reduces the colour temperature with 900K from 4200K to 3300K. Mounting bracket included.
7800 0289
Colour reduction filter -1200K. For FL 150 (IP20).
Reduces the colour temperature with 1200K from 4200K to 3000K. Mounting bracket included.
7800 0288
Colour reduction filter -900K. For FL 150 XT (IP44).
Reduces the colour temperature with 900K from 4200K to 3300K. Mounting bracket included.
7800 0299
Colour reduction filter -1200K. For FL 150 XT (IP44).
Reduces the colour temperature with 1200K from 4200K to 3000K. Mounting bracket included.
7800 0298
Colour reduction filter -900K. For FL 150-3 (IP20).
Reduces the colour temperature with 900K from 4200K to 3300K.
7800 0199
Colour reduction filter -1200K. For FL 150-3 (IP20).
Reduces the colour temperature with 1200K from 4200K to 3000K.
7800 0198
Filter mounting charge.
Mounting of colour filter or colour reduction filter.
9903 0090
Adaptor.
Reduces the light port size from Ø28 mm to Ø9 mm.
7800 0130
Mounting bracket.
For FL 75 and FL 150 (IP 20).
7800 0121
Thermal fuse 72° C.
For FL 75 and FL 150M (0160 0115 and 0160 0117).
6710 0100
Thermal fuse 98° C.
For FL 150 OM-2, FL 150 OME-2, FL 150 XT and FL 150 DMX (1999-2002).
6710 0101
prev
Print
next
9
Zoom to fit width
Zoom to fit page
Standard Fiber Harnesses. PMMA.
Illustration
Fiber type
Qty x
length (m)
Connector
Ø
Fiber termination
LxWxH (mm)
Weight (kg)
Item number
Ø4.5 mm PMMA
2x2 + 3 m
81xØ0.75
9
Cut
(9903 0013)
0.35
2200 5117
Ø1.0 mm PMMA
48x2 m
9
Starpoint
(9902 9996)
290x190x180
0.5
2200 5100
Ø1.0 mm PMMA
38x2 m +
38x3 m
9
Starpoint
(9902 9996)
290x190x180
0.96
2200 5101
Ø1.0 mm PMMA
38x3 m +
38x4 m
9
Starpoint
(9902 9996)
390x300x180
1.4
2200 5116
9
Fitting
(9903 0001)
410x290x50
0.8
2400 6000
9
Fitting
(9903 0001)
410x290x50
1
2400 6300
2.1
2400 6310
Ø3.0 mm PMMA
Ø3.0 mm PMMA
9x2.5 m
9x5 m
Ø3.0 mm PMMA
9x10 m
9
Fitting
(9903 0001)
Ø4.5 mm PMMA
4x2.5 m
9
Fitting
(9903 0001)
410x290x50
0.8
2400 6100
Ø4.5 mm PMMA
4x5 m
9
Fitting
(9903 0001)
410x290x50
1.8
2400 6400
Ø4.5 mm PMMA
5x10 m
9
Fitting
(9903 0001)
2.1
2400 6410
Ø4.5 mm PMMA
20x2.5 m
28
Fitting
(9903 0001)
490x490x100
2.7
2400 6600
28
Fitting
(9903 0001)
540x520x100
4
2400 6800
Ø4.5 mm PMMA
20x5 m
Fiberlight Flex Arms. PMMA.
Illustration
Product type
Connector
Ø
LxWxH (mm)
Weight (kg)
9
410x290x50
0.48
Item number
2 Flex arms. Black. Ø10x450 mm.
2 x 1.5 m Ø4.5 mm PMMA fiber between connector and flex arms.
Incl. 2 pcs. Ø12 mm lens, mounting bracket and screws.
System with additional arms – see special harnesses.
0320 0000
Standard Fiber Harnesses. Glass.
Illustration
Fiber type
Ø3.0 mm glass
Ø3.0 mm glass
Ø4.5 mm glass
Ø4.5 mm glass
10
prev
Qty x
length (m)
Connector
Ø
9 x 2.5 m
9x5m
4 x 2.5 m
20 x 5 m
Print
Fiber termination
LxWxH (mm)
Weight (kg)
9
Fitting
(9903 0001)
410x290x50
0.92
2400 5000
9
Fitting
(9903 0001)
410x290x50
1.5
2400 5300
9
Fitting
(9903 0001)
410x290x50
0.85
2400 5100
28
Fitting
(9903 0001)
400x370x100
6.2
2400 5800
next
Item number
Zoom to fit width
Zoom to fit page
Special Fiber Harnesses. Endlight Glass.
Illustration
Handling
number
Connecting
Connecting Ø91.
9903 0021
Connecting Ø281.
Illustration
9903 0020
Ext.
Ø
Fiber type
7
5200 0110
Ø1.5 mm endlight glass
2.7
39
308
8003
11
5200 0115
Ø2.0 mm endlight glass
4.0
22
176
14003
14
5200 0120
Ø3.0 mm endlight glass
5.0
10
822
30003
21
5200 0130
Ø4.5 mm endlight glass
6.5
4
372
66003
32
5200 0145
Ø6.0 mm endlight glass
9.0
2
222
110003
42
5200 0160
Termination / Application
.7
14
Ø1-4.5
.3
Ø2
Ø3-4.5
Ø3
Ø7
Ø6
Ø 10
9903 0001
Fitting termination with starpoint.
For connecting fibers to fitting 0310 1212 or
plaster/wooden ceiling.
Fiber: Ø3-6 mm.
9903 0006
Standard termination.
For mounting of fibers in ceiling/plate.
Fiber: Ø1-6 mm.
9903 0000
Standard termination with starpoint.
For mounting of fibers in ceiling/plate.
Ø6 Fiber: Ø1-6 mm.
Ø4.5
Handling
number
Fitting termination.
For connecting fibers to fittings.
Fiber: Ø1-6 mm.
14. 7
Ø7
Ø1
0
Ø7
Ø6
14. 3
Ø1.5
Item number
4003
14.3
Ø1
Bend
rad.
617
14
Ø6
Fibers per
cable
79
14.3
Ø3-Ø4.5
Ø28
2.2
Dimension outline
Ø6
Ø9
Ø1.0 mm endlight glass
Illustration
Ø1-Ø4.5
Max. fiber tails in
9902 9995
Compas termination.
Fiber: Ø3-6 mm.
Ø6
14
Ø10
Ø6.4
20
9903 0004
Shelf termination.
For connecting fiber to shelf fitting or 30o
asymmetric fitting.
Fiber: Ø2-3 mm.
9903 0005
Watertight acrylic termination.
For wet environments. When placed
permanently under water, a PMMA fiber is
recommended.
Fiber: Ø4.5 mm.
9903 0017
Crimped termination.
For mounting of fibers in plate/sign.
Ø1
Ø1.5
Ø2 Fiber: Ø1, Ø1.5 and Ø2 mm.
9903 0003
1.
For connecting, Roblon will charge an extra 8 cm length per fiber tail.
Randomized as standard.
3.
Number of 50 my raw fibers per cable.
2.
prev
Print
next
11
Zoom to fit width
Zoom to fit page
Special Fiber Harnesses. Endlight PMMA.
Illustration
Handling
number
Connecting
Connecting Ø91 (max. 135 x Ø0.75). For starlight ceilings or decorative lighting tasks,
where uniformity in light levels is not required from fiber tails.
9903 0021
1
Connecting Ø9-R (max. 127 x Ø0.75).
Randomized for uniform light. Ø2-6 mm fiber.
Always recommended in lighting tasks.
9903 0025
Connecting Ø281 (max. 1037 x Ø0.75).For starlight ceilings or decorative lighting tasks,
where uniformity in light levels is not required from fiber.
9903 0020
1
Connecting Ø28-R (max. 1014 x Ø0.75).
Randomized for uniform light. Ø2-10 mm fiber tails.
Always recommended in lighting tasks.
Ext.
Ø
Ø9
Ø9-R
Ø28
Ø28-R
Fibers /
Cable (mm)
Bend
rad.
Item number
Ø1 mm endlight
2.2
76
-
583
-
1xØ1
8
5200 0524
Ø1.5 mm endlight
2.7
45
-
345
-
3xØ0.75
12
5200 0548
Ø2 mm endlight
4.0
19
18
148
145
7xØ0.75
16
5200 0550
Ø3 mm endlight
5.0
9
9
74
72
14xØ0.75
24
5200 0551
Ø4.5 mm endlight
6.5
5
4
38
37
27xØ0.75
36
5200 0552
Ø6 mm endlight
8.5
2
-
20
20
50xØ0.75
48
5200 0553
Ø8 mm endlight
10
1
-
13
13
75xØ0.75
60
5200 0557
Ø10 mm endlight
12
1
-
8
8
71xØ1
75
5200 0595
Illustration
Fiber PMMA
Jacket: Black Megolon TM
Illustration
Dimension outline
Termination / Application
14.3
.7
14
.3
14
Ø1-4.5
Ø6
Ø1-4.5
Ø6
Ø1-4.5
14. 7
Ø6
Ø7
Ø1
0
Ø7
Ø6
14.3
Ø1–Ø4.5
9903 0024
Max. fiber tails in
14. 3
Ø7
Ø 10
Handling
number
Fitting termination.
For connecting fibers to fittings.
Fiber: Ø1-6 mm.
9903 0001
Fitting termination with starpoint.
For connecting fibers to fitting 0310 1212 or in
plaster/wooden ceiling. Fiber: Ø3-6 mm.
9903 0006
Compas termination.
Ø3-6
Ø3-6
Fiber: Ø3-6 mm.
9903 0004
Max termination.
Ø8-10
Ø8-10
Fiber: Ø8-10 mm.
9903 0014
Plasterboard termination.
Fits in a Ø6 mm hole.
Fiber: Ø2, Ø3 and Ø4.5 mm.
9903 0027
Plasterboard termination with starpoint.
Fits in a Ø6 mm hole.
Fiber: Ø2, Ø3 and Ø4.5 mm.
9903 0018
Standard termination.
For mounting of fibers in ceiling/plate.
Fiber: Ø1-6 mm.
9903 0000
Standard termination with starpoint.
For mounting of fibers in ceiling/plate.
Fiber: Ø1-6 mm.
9902 9995
Ø1-10
Cut termination.
Cut “raw” fiber end. Fiber: Ø1-10 mm.
9903 0013
Ø1
Starpoint termination.
For mounting of fibers in ceiling/plate.
Fiber: Ø1 mm.
9902 9996
Ø7
10
13
.5
Ø6
Ø7
10
13
.5
Ø6
Ø1
Ø1-10
Ø1
Ø1.5
Ø2
Ø3
Ø4.5
Ø6
14
Ø2-3
Shelf termination.
Ø6
Ø2-3
Ø1-2
1.
12
Ø4.5
Ø1
Ø1.5
Ø6.4
Ø4.5
Ø10
20
Ø2
Fiber: Ø2-3 mm.
9903 0005
Watertight acrylic termination.
Used in wet environments or where the fibers
are placed under water. Fiber: Ø4.5 mm.
9903 0017
Crimped termination.
For mounting of fibers in plate/sign.
Fiber: Ø1-2 mm.
9903 0003
Flex arm termination.
450 mm, black. Incl. handling, flange and fiber
Ø4.5 mm. Accessories: Lens - see 0320 0010.
9903 0009
For connecting, Roblon will charge an extra 8 cm length per fiber tail.
prev
Print
next
Zoom to fit width
Zoom to fit page
Special Fiber Harnesses. Sidelight PMMA.
Illustration
Handling
number
Connecting
Connecting Ø91 (135xØ0.75).
To be used if uniformity in light intensity from multiple fiber cables in connector is not required.
9903 0021
1
Connecting Ø9-R (127xØ0.75).
Randomized for uniform light (only Ø4.5 mm sidelight fibers).
Recommended when a high degree of uniformity is required.
9903 0025
1
Connecting Ø28 (960xØ0.75).
To be used if uniformity in light intensity from multiple fiber cables in connector is not required.
9903 0020
1
Connecting Ø28-R (960xØ0.75).
Randomized for uniform light (Ø4.5-14 mm sidelight fibers).
Recommended when a high degree of uniformity is required.
Illustration
Ext.
Ø
Ø9
Ø9-R
Ø28
Ø28-R
Raw fibers
Ø0.75 per cable
Item number
4.5
11
10
82
80
12
5200 0600
Ø8 mm sidelight PMMA2
8
2
-
20
19
49
5200 0601
Ø11 mm sidelight PMMA2
11
1
-
11
11
84
5200 0602
Ø14 mm sidelight PMMA2
14
1
-
6
6
144
5200 0603
Fiber / active Ø (mm)
Ø4.5 mm sidelight PMMA2
Illustration
1.
2.
9903 0024
Max. fiber tails in
Dimension outline
Handling
number
Termination / Application
Watertight end termination.
Black.
Without reflector.
Fiber: Ø4.5 mm.
9904 0013
Watertight end termination.
Black.
With reflector for max. light output.
Fiber: Ø8, Ø11 and Ø14 mm.
9904 0003
Cut termination.
Cut open fiber end. No charge.
Must be defined when ordering a harness.
Fiber: Ø4.5, Ø8, Ø11 and Ø14 mm.
9903 0013
For connecting, Roblon will charge an extra 8 cm length per fiber tail.
Jacket: UV-stabilised PVC. Algae resistant according to DS/ISO 846 incl. green algae.
Accessories for PMMA Sidelight and Fiber Harnesses.
Illustration
Product type
Cable binders for sidelight fibers. For Ø5 mm screw-fixation.
UV-resistant, 398 mm. Excl. M5 screw.
Milky white. 100 pcs. bag.
Mounting channel for Ø4.5 mm sidelight. For interior use.
Avoid direct UV exposure.
No lid, with self-adhesive tape. Transparent.
LxWxH (mm)
Item number
N/A
9300 1040
2000x7.8x5.8
9300 1050
Mounting channel for Ø8 mm sidelight. For interior use.
Avoid direct UV exposure.
No lid, with self-adhesive tape. Transparent.
2000x11x9
9300 1051
Mounting channel for Ø11 mm sidelight. For interior use.
Avoid direct UV exposure.
With lid, with self-adhesive tape. Transparent.
2000x13x12.5
9300 1052
Mounting channel for Ø14 mm sidelight. For interior use.
Avoid direct UV exposure. With lid, holes for screw fixation and
self-adhesive tape. Excl. screw. Transparent.
2000x17.5x17
9300 1053
prev
Print
next
13
Zoom to fit width
Zoom to fit page
Accessories for Fiber Harnesses.
Illustration
Product type
67
Ø12
67
Ø30
Ø1
2
18
10
Ø7
,1
Ø4
Ø8
9
Ø3
Ø4
Item number
Connector coupling Ø9.
For coupling of two Ø9 connectors (9903 0021, 9903 0025).
Light loss by using couplings: Approx. 50%.
2200 0390
Connector coupling Ø28.
For coupling of two Ø28 connectors (9903 0020, 9903 0024).
Light loss by using couplings: Approx. 50%.
2200 0395
Extension (Ø1-6 mm).
For coupling of two fitting terminations (9903 0001, 9903 0004).
Light loss by using couplings: Approx. 50%.
2200 0396
Acrylic lens for Ø1 mm PMMA.
To be mounted in the ceiling from below.
Use acid-free glue.
9903 0026
Acrylic point for Ø1 mm PMMA. 50 pcs.
To be mounted in the ceiling from below.
9903 0028
Acrylic point for Ø1 mm PMMA. 80 pcs.
9903 0029
O-rings (50 pcs.) and glue.
Used for fastening Ø1mm PMMA fibres in a thin plate (< 2 mm).
9904 0095
Do It Yourself Components for PMMA Sidelight.
Illustration
Product type
Item number
DIY connector Ø9 mm.
For 2 x Ø4.5 mm sidelight.
(24 fibers Ø0.75 mm)
9904 0040
DIY connector Ø9 mm.
For 1 x Ø8 mm sidelight.
(49 fibers Ø0.75 mm)
9904 0041
DIY connector Ø9 mm.
For 1 x Ø11 mm sidelight.
(84 fibers Ø0.75 mm)
9904 0042
DIY connector Ø9 mm.
For 1 x Ø14 mm sidelight.
(144 fibers Ø0.75 mm)
9904 0043
State number of fiber tails/raw fibers when ordering.
(max. 144 fibers Ø0.75 mm)
9904 0090
DIY connector Ø28 mm.
For 1xØ14 mm sidelight.
(144 fibers Ø0.75 mm)
9904 0050
DIY connector Ø28 mm.
For 2xØ11 mm sidelight.
(168 fibers Ø0.75 mm)
9904 0051
DIY connector Ø28 mm.
For 2xØ14 mm sidelight.
(288 fibers Ø0.75 mm)
9904 0052
DIY connector Ø28 mm.
For 6xØ11 mm sidelight.
(504 fibers Ø0.75 mm)
9904 0053
DIY connector Ø28 mm.
For 6xØ14 mm sidelight.
(864 fibers Ø0.75 mm)
9904 0054
(max. 1000 fibers Ø0.75 mm)
9904 0091
DIY connector Ø9 mm. Special-bore.
DIY connector Ø28 mm.Special-bore.
State number of fiber tails/raw fibers when ordering.
14
DIY polishing kit.
For DIY polishing.
1. Cut fibers with hot-knife. 2. Polish with a) black side b) white side.
9904 0008
Hot-knife.
For DIY cutting of fibers before polishing.
Power supply: 230V, 50/60Hz.
9904 0010
Waterproof end cap termination for Ø4.5 and Ø8 mm sidelight.
Seal to the sidelight fiber cable with hot air gun. Without reflector.
For on-site mounting.
7400 0010
Waterproof end cap termination for Ø11 and Ø14 mm sidelight.
Sealed to the sidelight fiber cable with hot air gun. Without reflector.
For on-site mounting.
7400 0020
prev
Print
next
Zoom to fit width
Zoom to fit page
Fittings, Interior.
Dimension
outline
Illustration
Product type
Item number
Staircase fitting.
No glass. For indication light in stairways, on walls etc.
Incl. carpet ring.
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
18 mm
Diffus
0310 1400
30° asymmetrical fitting. No glass.
For stairways, showcases and ceilings in order to direct light
on wall. Shelf termination.
Fiber: Ø2-3 mm.
Anodised aluminium, nature.
18 mm
59o
0310 1402
Aluminium, white RAL 9010.
0310 1403
Shelf fitting. With glass and mirror.
For integration in shelves (min. 16 mm) etc. IP44.
Shelf termination.
Fiber: Ø2-3 mm.
Anodised aluminium, nature.
30 mm
59o
0310 1401
Light tube.
For low-height showcases and object lighting. Illuminates
objects up to app. 160 mm height. Also for mounting in wall
for illumination of small paintings, plates etc. Consists of
tube with PMMA fibres + mounting bushing.
Fitting termination.
Special height and bending against surcharge, on
agreement. Fiber: Ø3/Ø4.5 mm.
Ø5 tube, anodised aluminium, nature. Fiber Ø3 mm.
16 mm
59o
0320 0020
59o
0320 0030
10-33o
0301 2201
MIN. 1 mm
MAX. 30 mm
Ø6 tube, anodised aluminium, nature. Fiber Ø4.5 mm.
27
27
MIN. 47 mm
MAX. 51.5 mm
Ø12.5
o
o
Ø15
Ball- and socket joint fitting. With Ø12 mm lens.
Light cone angles: Ø2: 10-27o
Ø3: 16-33o
Ø4.5: 19-31o
Fitting termination.
Fiber: Ø1-Ø4.5 mm.
Anodised aluminium, nature.
10,5
mm
Anodised aluminium, black.
0301 2203
Brass, gilt.
0301 2303
MIN. 1 mm
MAX. 30 mm
360 o
27 o
MIN. 56 mm
MAX. 61 mm
Ø12.5
27 o
Ø29
360 o
Ball- and socket joint fitting. With Ø26 mm lens.
Light cone angles: Ø2: 4-11o
Ø3: 7-12o
Ø4.5: 7-13o
Fitting termination.
Fiber: Ø1-4.5 mm.
Anodised aluminium, nature.
4-13o
MIN. 1 mm
MAX. 30 mm
Ball- and socket joint fitting. Without lens.
Fitting termination.
Fiber: Ø1-4.5 mm.
40.5
Anodised aluminium, black.
o
27
o
Anodised aluminium, nature.
0302 6201
0302 6203
10,5
mm
Ø12.5
27
10,5
mm
59o
0307 0205
Ø8
360
o
Anodised aluminium, black.
0307 0206
Fitting without lens and glass.
Spring fixed.
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
prev
18 mm
59o
0310 1212
Anodised aluminium, black.
0310 1230
Aluminium,white RAL 9010.
0310 1240
Brass, gilt.
0310 1250
Print
next
15
Zoom to fit width
Zoom to fit page
Fittings, Interior
Dimension
outline
Illustration
Product type
Item number
Fitting with Ø12 mm lens.
Spring fixed. IP44.
Light cone angles: Ø2: 11-29o
Ø3: 18-33o
Ø4.5: 19-33o
Ø6: 23-35o
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
18 mm
24
65.3
27,5
35
0310 1231
Aluminium, white RAL 9010.
0310 1241
Brass, gilt.
0310 1251
6
18 mm
86
3
68.
27.5
05
41.
127
128
Aluminium, white RAL 9010.
0310 1242
Brass, gilt.
0310 1252
Beespot.
IP68.
Compas- or Fitting termination.
Fiber: Ø3-6 mm.
Beespot Focus with Ø26 mm lens.
Steel (AISI 303). Nature.
Screw
fixed
onto
wall
or on
extension
arm
Beespot MAX.
IP68.
Max termination.
Fiber: Ø8-10 mm.
Beespot Focus MAX with Ø26 mm lens.
Steel (AISI 303). Nature.
Beespot Wide MAX with flat glass.
Steel (AISI 303). Nature.
Framing Spot.
Framing Projector. Produces an adjustable limited luminous
spot. For illumination of pictures and paintings a.o.
Fitting termination.
Fiber: Ø2-6 mm.
Anodised aluminium, nature.
Screw
fixed
onto
wall /
ceiling
86
prev
Gobo Spot.
Fitting which projects a Gobo (picture, logo, symbol).
Excl. Gobo-insert.
Gobo-insert info:
Thickness: 0.1-2 mm. Outer diameter: Ø22.5 mm.
Size of picture field max. Ø17 mm. Recommended: Ø14 mm.
Fitting termination.
Fiber: Ø2-6 mm.
Anodised aluminium, nature.
Print
16-30o
0313 0000
52o
0313 0001
18-34o
0313 0005
52o
0313 0006
0313 0800
0313 0850
Anodised aluminium, black.
16
0310 1209
0310 1232
Anodised aluminium, black.
129
Diffuse
Anodised aluminium, black.
Beespot Wide with flat glass.
Steel (AISI 303). Nature.
85.5
0310 1216
Anodised aluminium, black.
Fitting with acrylic cone.
For starry effect. Spring fixed. IP44.
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
6
11-36o
Screw
fixed
onto
wall /
ceiling
0313 0900
0313 0950
next
Zoom to fit width
Zoom to fit page
Fittings, Interior
Dimension
outline
8
Illustration
Ø2
5
Ø4
0
70
Ø4
2
Product type
Item number
Focus lens for Framing Spot and Gobo Spot.
Accessories for Framing Spot and Gobo Spot. Used by long
distance / high light intensity and for illumination of small
pictures. Anodised aluminium, nature.
0313 0810
Anodised aluminium, black.
0313 0860
Cover for Framing Spot and Gobo Spot.
Accessories for Framing Spot and Gobo Spot.
Minimises false light.
Anodised aluminium, nature.
0313 0815
Anodised aluminium, black.
0313 0865
Fitting with flat glass.
Spring fixed. IP44.
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
18 mm
52o
Anodised aluminium, black.
0310 1233
Aluminium, white RAL 9010.
0310 1243
Brass, gilt.
0310 1253
Spear crystal 12.5 mm.
Light pattern: 8 pronounced spear shaped lights. Spring fixed.
Fitting termination.
Fiber: Ø1-6 mm.
Aluminium, white RAL 9010.
18 mm
0310 1244
Brass, gilt.
0310 1254
Spear Crystal 31 mm.
Light pattern: Several spear shaped lights. Spring fixed.
Fitting termination.
Fiber: Ø1-6 mm.
Aluminium, white RAL 9010.
18 mm
0310 1245
Brass, gilt.
0310 1255
Spear Crystal 67 mm.
Light pattern: 8 diffuse spear shaped lights. Spring fixed.
Fitting termination.
Fiber: Ø1-6 mm.
Aluminium, white RAL 9010.
18 mm
0310 1247
Brass, gilt.
0310 1257
Ball crystal 18.5 mm.
Light pattern: Pronounced ice crystals Spring fixed.
Fitting termination.
Fiber: Ø1-6 mm.
Aluminium, white RAL 9010.
18 mm
0310 1246
Brass, gilt.
prev
0310 1213
0310 1256
Tiltable fitting Ø32 mm. With 20o tiltable flat glass.
Spring fixed.
Wood:
Ø27
mm
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
Plaster
Ø25
mm
52o
0310 1225
Aluminium, white RAL 9010.
0310 1265
Brass, gilt.
0310 1275
Print
next
17
Zoom to fit width
Zoom to fit page
Fittings, Interior
Illustration
Dimension
outline
Product type
Item number
Tiltable fitting Ø32 mm. With 20o tiltable lens (Ø12 mm).
Spring fixed.
Light cone angles: Ø3 mm:
18-36o
Ø4.5 mm: 19-33o
Ø6 mm:
23-35o
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
Wood:
Ø27
mm
Plaster
Ø25
mm
11-36o
Aluminium, white RAL 9010.
0310 1264
Brass, gilt.
0310 1274
Fitting Ø50 mm. With Ø12 mm lens.
Spring fixed. IP44.
Light cone angles: Ø3 mm:
18-36o
Ø4.5 mm: 19-33o
Ø6 mm:
23-35o
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
Wood:
Ø40
mm
Plaster
Ø37
mm
11-36o
Aluminium, white RAL 9010.
Wood:
Ø40
mm
Plaster
Ø37
mm
4-24o
Aluminium, white RAL 9010.
MIN. 1 mm
MAX. 30 mm
0310 1220
0310 1260
Fitting Ø50 mm. With Ø26 mm lens.
Spring fixed. IP44.
Light cone angles: Ø3 mm:
7-24o
Ø4.5 mm: 10-24o
Ø6 mm: 14-23o
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
50
0310 1224
0310 1226
0310 1266
Fitting Ø50 mm MAX. With Ø26 mm lens.
Spring fixed or by a snaplock. IP44.
Light cone angles: Ø8 mm: 22-30o
Ø10 mm: 24-33o
Max termination.
Fiber: Ø8-10 mm.
Anodised aluminium, nature.
Wood:
Ø40
mm
Plaster
Ø37
mm
22-33o
Aluminium, white RAL 9010.
0310 2000
0310 2100
o
Tiltable fitting Ø50 mm. With Ø26 mm tiltable lens (30 ).
Spring fixed.
Light cone angles: Ø3 mm:
7-24o
Ø4.5 mm: 10-24o
Ø6 mm:
14-23o
Fitting termination.
Fiber: Ø1-6 mm.
Anodised aluminium, nature.
18
prev
Wood:
Ø40
mm
Plaster
Ø37
mm
4-24o
0310 1223
Aluminium, white RAL 9010.
0310 1263
Brass, gilt.
0310 1273
Lens for Flex arm termination. Ø12 mm.
For adjustment of light intensity.
0320 0010
Print
next
Zoom to fit width
Zoom to fit page
Fittings, Exterior. Sirius and Pool.
Dimension
outline
Illustration
Product type
Item number
SIRIUS OPAL. With opal flat glass.
Ø25 mm uplight fitting. Sirius is used for lighting purposes
and indication light in driveways etc. Run the fibers in the flex
hose and seal between fitting and hose with silicone. IP44.
Fitting- or Compas termination.
Fiber: Ø1-6 mm.
Stainless steel (AISI 316).
SIRIUS CLEAR. With clear flat glass.
Ø25 mm uplight fitting. IP44.
Fitting- or Compas termination.
Fiber: Ø1-6 mm.
Stainless steel (AISI 316).
Wall/
wood
floor:
Ø16 mm
SIRIUS FOCUS. With Ø14 mm lens.
Ø25 mm uplight fitting. IP44.
Fitting- or Compas termination.
Fiber: Ø1-6 mm.
Stainless steel (AISI 316).
Flagstone:
Ø21 mm
113°
0313 0600
52°
0313 0601
1136°
0313 0602
SIRIUS HALF-MOON.
Ø25 mm uplight fitting with clear flat glass and 50 % blind
insert to avoid glare when mounted vertically. IP44.
Fitting- or Compas termination.
Fiber: Ø1-6 mm.
Stainless steel (AISI 316).
20
4
Ø31
Ø21
26
2
Ø16
26
2
Ø24,75
Ø16
25
31
Ø35
42
53
Ø70
Flagstone:
Ø26 mm
0313 0608
SIRIUS FOUNTAIN FOCUS. With Ø12 mm lens.
Ø25 mm uplight fitting. To be mounted in a plate (1-15 mm).
Incl. nut, spacer and gasket. IP68.
Fitting- or Compas termination.
Fiber: Ø1-6 mm.
Stainless steel (AISI 316).
1835°
0313 0610
SIRIUS FOUNTAIN WIDE. With flat glass.
Ø25 mm uplight fitting. To be mounted in a plate (1-15 mm).
Incl. nut, spacer and gasket. IP68.
Fitting- or Compas termination.
Fiber: Ø1-6 mm.
Stainless steel (AISI 316).
52°
0313 0620
POOL Ø35 FOCUS. ½". With Ø12 mm lens.
For application under water: Spa pools, swimming pools and
fountains etc. To be fastened by screws or concrete. IP68.
Fitting- or Compas termination.
Fiber: Ø2-6 mm.
Stainless steel EN / DIN W. no 14436 (AISI 316).
POOL Ø35 WIDE. With flat glass.
Stainless steel EN / DIN W. no 14436 (AISI 316).
Ø21
Wall/
floor:
Ø21 mm
52°,
tilted
30°
Stainless steel (AISI 316).
Ø24,75
Ø42
SIRIUS ANGLE. With clear flat glass.
Ø30 mm uplight fitting with fixed 30° tilt of light cone.
IP44.
Fitting termination.
Fiber: Ø1-4.5 mm.
0313 0605
POOL Ø70 FOCUS. 5/4". With Ø26 mm lens.
Used when concreting or mounting with PVC liner or in plate
(1-15 mm). IP68.
Fitting-, Compas- or Max termination.
Fiber: Ø3-10 mm.
Stainless steel EN / DIN W. no 14436 (AISI 316).
POOL Ø70 WIDE. With flat glass.
Stainless steel EN / DIN W. no 14436 (AISI 316).
Illustration
Accessories for Pool fittings
In
water:
1327°
0313 0750
38°
0313 0755
In
water:
7-25°
0313 0760
38°
0313 0765
Item number
Cementation Kit for Pool 35.
0313 0759
Wrench for Pool 35.
Special wrench of stainless steel for fastening of Pool 35.
0313 0758
Cementation Kit for Pool 70.
0313 0769
Wrench for Pool 70.
Special wrench of stainless steel for fastening of Pool 70.
prev
Print
next
0313 0768
19
Zoom to fit width
Zoom to fit page
Fittings, Exterior. Compas and Compas MAX.
Illustration
Dimension
outline
Item
number
Product type
Compas Angle, Wide and Focus.
A series of recessed uplight fitings. For building facade lighting,
marking light, parks, gangways, fountains, bathrooms etc.
IP-class:
Impact strength:
Statisk styrke:
Materiale:
20
prev
IP 68 (1 m of water pressure).
20 joules.
2.500 kg.
Steel (AISI 316)/8 mm tempered glass
(clear/opal).
Angle Clear. Plane flange. Ø100 mm uplight.
With 18° tiltable lens (Ø26 mm). for focusing and directing the
light beam or to avoid glare. With clover-shaped insert.
Compas termination.
Fiber: Ø3-6 mm.
Gray plastic insert.
102
mm
821°
0313 0200
Angle Clear. Slanting flange. Ø114 mm.
Gray plastic insert.
76
mm
821°
0313 0201
Angle MAX Clear. Plane flange. Ø100 mm.
With 18° tiltable lens (Ø26 mm). for focusing and directing the
light beam or to avoid glare. With clover-shaped insert.
Max termination.
Fiber Ø8-10 mm.
Gray plastic insert.
102
mm
1621°
0313 0210
Angle MAX Clear. Slanting flange. Ø114 mm.
Gray plastic insert.
76
mm
1621°
0313 0211
Wide Clear. Plane flange. Ø100 mm. Without lens.
Compas termination.
Fiber: Ø3-6 mm.
White plastic insert.
102
mm
52°
0313 0202
Wide Clear. Slanting flange. Ø114 mm.
White plastic insert.
76
mm
52°
0313 0204
Wide MAX Clear. Plane flange. Ø100 mm. Without lens.
Max termination.
Fiber: Ø8-10 mm.
White plastic insert.
102
mm
52°
0313 0212
Wide MAX Clear. Slanting flange. Ø114 mm.
White plastic insert.
76
mm
52°
0313 0214
Wide Opal. Plane flange. Ø100 mm. Without lens.
Incl. diffuser for uniform light from glass.
Compas termination.
Fiber: Ø3-6 mm.
White plastic insert.
102
mm
113°
0313 0203
Wide Opal. Slanting flange. Ø114 mm.
White plastic insert.
76
mm
113°
0313 0205
Wide MAX Opal. Plane flange. Ø100 mm. Without lens.
Incl. diffuser for uniform light from glass.
Max termination.
Fiber: Ø8-10 mm.
White plastic insert.
102
mm
113°
0313 0213
Wide MAX Opal. Slanting flange. Ø114 mm.
White plastic insert.
76
mm
113°
0313 0215
Focus Clear. Plane flange. Ø100 mm. With fixed Ø26 mm lens.
Compas termination.
Fiber: Ø3-6 mm.
White plastic insert.
102
mm
1621°
0313 0206
Focus Clear. Slanting flange. Ø114 mm.
White plastic insert.
76
mm
1621°
0313 0207
Focus MAX Clear. Plane flange. Ø100 mm. With fixed Ø26 mm
lens.
Max termination.
Fiber: Ø8-10 mm.
White plastic insert.
102
mm
1621°
0313 0216
Focus MAX Clear. Slanting flange. Ø114 mm.
White plastic insert.
76
mm
1621°
0313 0217
Print
next
Zoom to fit width
Zoom to fit page
Fittings, Exterior. Accessories for Compas and Compas MAX.
Illustration
Product type
Item number
Insert Angle.
Blue plastic insert.
4300 1032
Insert Angle.
White plastic insert.
4300 1009
Insert Angle.
Green plastic insert.
4300 1031
Insert Angle.
Gilt plastic insert.
4300 1034
Insert Wide and Focus, Wide and Focus MAX.
Blue plastic insert.
4300 1022
Insert Wide and Focus, Wide and Focus MAX.
Grey plastic insert.
4300 1020
Insert Wide and Focus, Wide and Focus MAX.
Green plastic insert.
4300 1021
Insert Wide and Focus, Wide and Focus MAX.
Gilt plastic insert.
4300 1024
Insert Angle MAX.
Blue plastic insert.
4300 1062
Insert Angle MAX.
White plastic insert.
4300 1060
Insert Angle MAX.
Green plastic insert.
4300 1063
Insert Angle MAX.
Gilt plastic insert.
4300 1064
Glass for Compas. Clear.
8 mm tempered clear glass.
5400 0050
Glass for Compas. Opal.
8 mm tempered opal glass.
5400 0051
Cementation Kit. For plane mounting in flagstone.
Consists of bush, fixation bracket and 4 screws.
The bush is glued to the hole in the flagstone and the Compas fitting is screwed
to the bush.
0313 0301
Embedment Kit. For fixation of the Compas fitting before cementing.
Consists of protection cover, 3 fixation legs and 3 hammer screws.
The 3 legs are hammered to the Compas fitting and fixed to a piece of wood,
before cementing around the fitting.
0313 0300
Rustique flange for Compas and Compas MAX.
Plane.
Red brass (gun metal) with rustic appearance.
4300 1071
Mounting tube for Compas and Compas MAX.
Plastic tube (Ø90x554 mm) with an internal diametre of 76 mm. To be recessed in
concrete. The fitting is then fixed in the tube and possibly sealed with silicone.
Grey plastic..
prev
Print
next
0313 0302
21
Zoom to fit width
Zoom to fit page
Fittings, Exterior. Bollards. Landscape.
Illustration
Dimension
outline
Product type
Item number
ECLIPSE.
Bollard top Ø50 mm. IP 67.
With halfmoon-shaped PMMA prism. Directs the light
slightly downwards, while the prism is lit.
Fitting- or Compas termination.
Fiber: Ø3-6 mm.
Stainless steel, glassblown (AISI 304).
Wall:
Ø26
mm
or
on
bollard
tube
0313 0420
PLUS V.
Bollard top Ø40 mm. IP67.
With clover-shaped PMMA prism in top. Directs the light
upwards, slightly tilted from vertical. For illumination of
walls, plants, trees etc.
Fitting- or Compas termination.
Fiber: Ø3-6 mm.
Stainless steel, glassblown (AISI 304).
Monted
on
bollard
tube
0313 0401
Monted
on
bollard
tube
0313 0402
Stainless steel, glassblown (AISI 304).
Monted
on
bollard
tube
0313 0400
CIRCLE V.
Bollard top Ø40 mm. IP67.
Diffuse light upwards and sidewards. Ideal for lighting and
paths, under trees and bushes etc.
Fitting- or Compas termination.
Fiber: Ø3-6 mm.
Monted
on
bollard
tube
PLUS H.
Bollard top Ø40 mm. IP67.
With clover-shaped PMMA prism in the side.
For driveways, light on low-height plants, flowerbeds etc.
Fitting- or Compas termination.
Fiber: Ø3-6 mm.
Stainless steel, glassblown (AISI 304).
CIRCLE H.
Bollard top Ø40 mm with 360o light beam. IP67.
Ideal for lighting of flowerbeds, along garden paths etc.
Fitting- or Compas termination.
Fiber: Ø3-6 mm.
0313 0403
PMMA.
Bollard tube 40.
Ø40 x 100 mm. For Ø40 mm Bollards.
Incl. stainless screws.
Stainless steel, glassblown (AISI 304).
Screw
onto
flagstone /
spear
Bollard tube 40.
Ø40 x 800 mm. For Ø40 mm Bollards.
Incl. stainless screws.
Stainless steel, glassblown (AISI 304).
Bollard tube 50.
Ø50 x 100 mm. For ECLIPSE bollard top.
IIncl. stainless screws.
Stainless steel, glassblown (AISI 304).
Screw
onto
flagstone /
spear
Bollard tube 50.
Ø50 x 800 mm. For ECLIPSE bollard top.
Incl. stainless screws.
Stainless steel, glassblown (AISI 304).
0313 0451
0313 0450
0313 0456
0313 0455
Mounting Spear for Bollard tube.
For mounting of Ø40 or Ø50 mmbollard tube in the ground.
Incl. stainless screws.
Stick
into
ground
/ gravel
Steel (AISI 304).
22
prev
Print
next
0313 0460
Zoom to fit width
Zoom to fit page
Fittings, Exterior. Beespot and Eye-ball.
Dimension
outline
Illustration
Product type
24
27,5
65.3
6
Item number
Beespot XT.
Spotlight with lens or flat glass. For exterior placement, over or
under water; For object or facade lighting, in fountains etc. Incl.
screw. Black PG.
Fitting- or Compas termination.
IP-class:
Fiber:
IP 68.
Ø3-6 mm.
Beespot XT Focus. With Ø26 mm lens.
Stainless steel (AISI 316).
35
85.5
Beespot XT Wide. With flat glass.
Stainless steel (AISI 316).
Screw
fixed
onto
wall
or on
extension
arm
1630o
0313 0020
52o
0313 0021
1834o
0313 0025
52o
0313 0026
Beespot XT MAX.
As Beespot XT, but for thicker fibers.
6
86
3
68.
27.5
05
41.
32
27,5
Ø34
Ø27
Extension Arm 500 mm.
For Beespot.
For vertical mounting on flagstone/ground or mounting on wall.
Incl. stainless steel screws and rubber bushing for sealing
between arm and fiber (max. Ø6 mm PMMA).
Stainless steel (AISI 304).
Screw
onto
wall
or into
flagstone
Beespot XT Focus MAX. With Ø26 mm lens.
Stainless steel (AISI 316).
25
28 mm
1136o
0313 0500
28 mm
1136o
0313 0501
28 mm
1136o
0313 0510
28 mm
1136o
0313 0511
Eye-ball Polish. Plane flange.
Tiltable- and adjustable fitting forfastening by nut. IP 44.
To be fitted in the ceiling or in the wall.
Fitting termination.
Fiber: Ø1-6 mm.
Ø27
Stainless steel, polished (AISI 316).
32
27,5
Ø34
Ø27
25
30
Eye-ball Brushed. Conical flange.
Tiltable- and adjustable fitting for fastening by nut. IP 44.
To be fitted in the ceiling or in the wall.
Fitting termination.
Fiber: Ø1-6 mm.
Stainless steel, brushed (AISI 316).
Ø35
Eye-ball Brushed. Plane flange.
Tiltable- and adjustable fitting for fastening by nut. IP 44.
To be fitted in the ceiling or in the wall.
Fitting termination.
Fiber: Ø1-6 mm.
Ø27
Stainless steel, brushed (AISI 316).
prev
0313 0010
Eye-ball Polish. Conical flange.
Tiltable- and adjustable fitting for fastening by nut. IP 44.
To be fitted in the ceiling or in the wall.
Fitting termination.
Fiber: Ø1-6 mm.
Stainless steel, polished (AISI 316).
Ø35
30
Beespot XT Wide MAX. With flat glass.
Stainless steel (AISI 316).
Screw
fixed
onto
wall
or on
extension
arm
Max termination.
Fiber: Ø8-10 mm.
Print
next
23
Zoom to fit width
Zoom to fit page
Conduit System, XPO.
Length
mm
Ø mm
Colour
Item number
< 5800
26
Black
0600 0100
< 5800
26
Nature
0600 1100
100
26
Black
0600 0200
100
26
Nature
0600 1200
50
26
Black
0600 0310
Fitting: Ø28 x 34 mm. Ø20 mm lens.
Tiltable 38o i all directions.
50
26
Nature
0600 1310
Light cone adjustment: 15-30o.
100
26
Black
0600 0300
Conduit: Anodised aluminium. Fitting: Plastic.
100
26
Nature
0600 1300
50
26
Black
0600 0311
50
26
Nature
0600 1311
100
26
Black
0600 0301
100
26
Nature
0600 1301
50
26
Black
0600 0312
Fitting: Ø28 x 34 mm. Without lens.
Tiltable 38o i all directions.
50
26
Nature
0600 1312
Light cone: 59o.
100
26
Black
0600 0302
Conduit: Anodised aluminium. Fitting: Plastic.
100
26
Nature
0600 1302
50
26
Black
0600 0313
Fitting: Ø12 x 13 mm. Without lens.
Tiltable 38o i all directions.
50
26
Nature
0600 1313
Light cone: 59o.
100
26
Black
0600 0303
100
26
Nature
0600 1303
-
-
Black
0600 0350
-
-
Grey
0600 1350
-
-
Black
0600 0351
-
-
Grey
0600 1351
-
-
Black
0600 0352
-
-
Grey
0600 1352
-
-
Black
0600 0353
-
-
Grey
0600 1353
Black
0600 0400
Grey
0600 1400
Illustration
Product type
Conduit.
Including front interval parts and full length back part.
Per metre.
Anodised aluminium. State full length of conduit when ordering.
Light point Module 100.
Module with 4 light point locations - placed with intervals of 25 mm.
100 mm, anodised aluminium.
o
Fitting Module 15-30 .
Fitting Module 30-45o.
Fitting: Ø28 x 34 mm. With Ø20 mm lens.
Tiltable 38o i all directions.
Light cone adjustment: 30-45o.
Conduit: Anodised aluminium. Fitting: Plastic.
o
Fitting Module 59 .
Fitting Module Mini 59o.
Conduit: Anodised aluminium. Fitting: Plastic.
o
Optical Head 15-30 .
With Ø20 mm lens. Ø28 x 34 mm.
For replacement of other optical heads in conduit system.
Plastic.
Optical Head 30-45o.
With Ø20 mm lens. Ø28 x 34 mm.
For replacement of other optical heads in conduit system.
Plastic.
Optical Head 59o.
With lens. Ø28 x 34 mm.
For replacement of other optical heads in conduit system.
Plastic.
Optical Head Mini 59o.
With lens. Ø12 x 13 mm.
For replacement of other optical heads in conduit system.
Plastic.
Angle Joint 90o.
Adjustment corner enabling the conduit to be adjusted in various
angles.
Plastic.
24
prev
Print
next
Zoom to fit width
Zoom to fit page
Conduit System, XPO.
Illustration
Length
mm
Product type
Mounting clip (additional).
Clip for fixation of the conduit.
Comes in a 10-piece bag.
Plastic. Per bag.
Mounting bush (threaded).
Bush for fixation of the conduit.
46 x 7 mm nut included. M32 thread.
Anodised aluminium.
Colour
Item number
-
-
Black
0600 0500
-
-
Grey
0600 1500
30
33
Black
0600 0501
30
33
Nature
0600 1501
-
-
Black
0600 0502
-
-
Nature
0600 1502
-
-
Black
0600 0504
-
-
Nature
0600 1504
-
-
Black
0600 0503
-
-
Nature
0600 1503
-
-
Black
0600 0401
-
-
Grey
0600 1401
-
-
Black
9904 0033
Cover flange for bush (additional).
For front mounting. Slightly cone shaped. For support of conduit.
Ø65 x height 4 mm.
Cannot be postmounted. Ø65 mm washer included.
Anodised aluminium.
2-part cover flange for bush (additional).
For rear mounting of XPO conduit. Slightly cone shaped. For support of conduit. Can be postmounted. Ø65 x højde 4 mm.
Ø65 mm washer included.
Anodised aluminium.
Screw flange for bush (additional).
Slightly cone shaped. For fastening of the mounting bush/conduit
from the front. Post mounting not possible. Ø65 x height 4 mm.
Screws & plugs incl. Anodised aluminium.
End button.
Aesthetic finish for end of conduit.
Used if end of conduit is visible.
Plastic.
Nylon flex protection hose. For protection of ”raw” single fibres
between conduit and connector. Per metre.State distance between
conduit and connector when ordering.
Conduit System, Connecting - XPO.
Illustration
Handling
number
Connecting
Connecting Ø9.
9903 0021
Connecting Ø9-R. For uniform light intensity from fiber tails (Ø2–4.5 mm fiber).
9903 0025
Connecting Ø28.
9903 0020
Connecting Ø28-R. For uniform light intensity from fiber tails (Ø2-4.5 mm fiber).
1
Max. fibers in
Illustration
Ø9 mm
Ø28 mm2
Max. fibers
in conduit1
Raw fibers / Cable
Item number
Ø0.75 mm PMMA.
135
1025
300
1 x Ø0.75 mm
5200 0507
Ø1.0 mm PMMA.
76
575
185
1 x Ø1.0 mm
5200 0510
Ø1.5 mm PMMA.
45
330
100
7 x Ø0.50 mm
5200 0558
Ø2.0 mm PMMA.
19
145
42
7 x Ø0.75 mm
5200 0550
PMMA fiber
Ø3.0 mm PMMA.
9
72
21
14 x Ø0.75 mm
5200 0551
Ø4.5 mm PMMA.
53
37
11
27 x Ø0.75 mm
5200 0552
Max. fibers1 in
Illustration
Illustration
9903 0024
Ø9 mm
Ø28 mm2
Max. fibers
in conduit1
Raw fibers / Cable
Item number
Ø1.0 mm Glass.
78
615
178
400 x Ø50 µm
5200 0110
Ø1.5 mm Glass.
39
307
89
800 x Ø50 µm
5200 0115
Ø2.0 mm Glass.
22
176
51
1400 x Ø50 µm
5200 0120
Ø3.0 mm Glass.
10
79
23
3000 x Ø50 µm
5200 0130
Ø4.5 mm Glass.
4
36
10
6600 x Ø50 µm
5200 0145
Glass fiber
Handling
number
Fiber terminations for XPO Conduit System
Liht point termination.
Fiber: Ø0.75, Ø1, Ø1.5, Ø2 mm PMMA and glass fiber.
9903 0015
Fitting termination.
Fiber: Ø2, Ø3, Ø4.5 mm PMMA and glass fiber.
1
Max. number of fiber apply for single-end conduit construction.
2
Notice! With Ø28 mm connecting, the conduit diameter (not the connector) is the limiting factor as to number of fibres !
3
Randomised PMMA Ø4.5 mm = max. 4 tails in Ø9 connecting.
All fiber dimensions are active fiber Ø.
prev
Print
next
9903 0001
25
Zoom to fit width
Zoom to fit page
Conduit System, Brass.
Illustration
Product type
Item number
Ø17 mm polished brass conduit. Inside Ø14 mm.
Brass. Per metre.
8501 7150
Ø20 mm polished brass conduit. Inside Ø17 mm.
Brass. Per metre.
8502 0150
Ø25 mm polished brass conduit. Inside Ø23 mm.
Brass. Per metre.
8502 5510
Light button Ø8 mm. Mounted on conduit.
Fiber: Ø1.5 mm. Glass.
Brass.
60o
4300 0450
Fitting with Ø12 mm lens. Tiltable and adjustable.
Mounted on conduit. Data as for fitting 0301 2201.
Fiber: Ø1-4.5 mm glass.
Brass.
2546o
0301 2351
Fitting with Ø26 mm lens. Tiltable and adjustable.
Mounted on conduit. Data as for fitting 0302 6201.
Fiber: Ø1-4.5 mm glass.
Brass.
7-25o
0302 6351
60o
0300 7350
Fitting without lens and glass. Tiltable.
Mounted on conduit.
Fiber: Ø1-4.5 mm glass.
Brass.
Termination lid. For Ø17, Ø20 or Ø25 mm conduit. Mounted.
Brass.
9904 0031
Connection.
Connects conduit and flexible hose. Brass.
9904 0032
Nylonflex protection hose.
Black. Incl. handling. State length between conduit and harness connector when ordering.
9904 0033
Fixation bushing. For Ø17, Ø20 and Ø25 mm conduit. Incl. nut. Max L= 80 mm. Hole max.
Ø50 mm. Adapted to conduit Ø and thickness on mounting plate. State plate thickness.
9904 0034
Mounting of fiber in conduit.
All fiber Ø. Charge per fiber.
9903 0010
Surface treatment.
All RAL-colours and chrome (black and matt). Incl. fittings and buttons. One-off price.
9904 0030
Ø17 mm conduit
Fiber type
9 mm poly.
28 mm poly.
Ø20 mm conduit
9 mm poly.
28 mm poly.
Ø25 mm conduit
9 mm poly.
28 mm poly.
Item number
Ø1.0 mm glass.
67
88
67
125
67
245
5200 0110
Ø1.5 mm glass.
32
34
32
48
32
95
5200 0115
Ø2.0 mm glass.
18
22
18
31
18
61
5200 0120
Ø3.0 mm glass.
9
9
9
13
9
25
5200 0130
Ø4.5 mm glass.
4
4
4
6
4
12
5200 0145
LxWxH (mm)
Weight (kg)
Item number
Demonstration Material.
Illustration
Product type
Small Demo Box.
0120 0131, 0310 1209, 0310 1212, 0310 1213, 0310 1216, 0301 2202, 0302 6201,
0310 1223, 03101 224, 0307 0205. Conduit with: 0301 2351, 0302 6351, 0300
7350, flex w. Ø4.5 PMMA, Glass fiber harness: Ø1-4.5, 6512 4200, harness Ø1
PMMA, conduit Ø5, Ø14 sidelight.
470x170x370
4.9
0710 0000
Large Demo Box.
0150 0183, 0160 0121, harness PMMA Ø1, 2, 3, 4.5 and 6 mm, sidelight PMMA
Ø4.5, 8, 11 and 14 mm, 0313 0100, 0313 0190, 0313 0162, 0313 0000, 0313 0400,
0313 0451, 0310 1400, 0310 1401, 0310 1244, 0310 1245, 03101 256, 0310 1257,
7800 0130.
520x330x400
22
0710 0006
Demo PMMA Fiber Harness.
Ø28-R connecting.
0.75 m fiber.
With all PMMA fiber types and fiber terminations.
26
prev
Print
2280 0125
2.5
next
Zoom to fit width
Zoom to fit page
Standard Sauna Sets and Basic Sets. Glass.
Illustration
Product type
Basic Set 2.
Basic Set 3.
Basic Set S.
Basic Set L.
Light
generator
Fiber type
Termination
LxWxH (mm)
Weight (kg)
Item number
42 W
(0120 0101)
Ø2 mm glass:
2x2+2x2.5+2x3 m.
Fitting
290x190x180
1.5
2200 5010
42 W
(0120 0101)
6x Ø3 mm glass:
2x2+2x2.5+2x3 m.
Fitting
290x190x180
1.6
2200 5020
42 W
(0120 0101)
6 x Ø3 mm glass:
2x3.5+2x4+2x4.5 m.
Fitting
290x190x180
1.55
2200 5030
75 W
(0150 0175)
6 x Ø3 mm glass:
2x3.5+2x4+2x4.5 m.
Fitting
290x190x180
4.6
2200 5075
42 W
(0120 0101)
Ø2 mm glass:
2x2.5+3x3+2x3.5 m.
Ø4.5 mm: 1x 3.5 m.
8 gilt:
7x0310 1250 +
1x0310 1251.
290x190x180
2
2200 5017
Basic Set Combi.
Standard Starlight Ceiling Sets and Basic Sets. PMMA.
Illustration
Product type
Light
generator
Fiber type
Termination
LxWxH (mm)
Weight (kg)
Item number
Starlight Set 81.
20 W
(01200001)
Ø0.75 mm PMMA:
54x3 m + 27x2 m
Cut
(9903 0013)
N/A
2200 5005
42 W
(0120 0121)
Ø1 mm PMMA:
48x2 m
Starpoint
(9902 9996)
290x190x180
1.05
2200 5000
42 W
(0120 0121)
76xØ1 mm PMMA:
38x2 + 38x3 m
Starpoint
(9902 9996)
290x190x180
1.85
2200 5012
42 W
(0120 0121)
76xØ1 mm PMMA:
38x3 + 38x4 m
Starpoint
(9902 9996)
290x190x180
2.6
2200 5018
75 W 8colour wheel
(0150 0183)
76xØ1 mm PMMA:
38x2 + 38x3 m
Starpoint
(9902 9996)
190x190x180
4.7
2200 5014
75 W Sparkling wheel
(0180 0182)
76xØ1 mm PMMA:
38x2 + 38x3 m
Starpoint
(9902 9996)
190x190x180
4.7
2200 5016
42 W
(0120 0121)
Ø2 mm PMMA:
16x3.5 m
Standard
with starpoint
(9902 9995)
290x190x180
2.1
2200 5056
75 W
(0150 0178)
Ø3 mm PMMA:
9x2.5 m
9 x Fitting
(0310 1209)
390x290x180
4.9
2200 5052
Basic Set 9.
75 W
(0150 0178)
Ø3 mm PMMA:
9x3.5 m.
Fitting
(9903 0001)
390x290x180
4.77
2200 5055
Basic Set 4 FA.
75 W
(0150 0178)
Ø4.5 mm PMMA:
4x2.5 m
4 x Fitting
(0310 1216)
390x290x180
4.9
2200 5051
Basic Set 4 JA.
75 W
(0150 0178)
Ø4.5 mm PMMA:
4x2.5 m
4 x Fitting
(0310 1224)
390x290x180
4.9
2200 5050
Basic Set 4.
75 W
(0150 0178)
Ø4.5 mm PMMA:
4x2.5 m.
Fitting
(9903 0001)
390x290x180
4.84
2200 5054
Starlight Set 48.
Incl. glue and O-rings.
Starlight Set 76S.
Incl. glue and O-rings.
Stjernehimmel 76XL.
Incl. glue and O-rings.
Starlight Set 76L.
Incl. glue and O-rings.
Starlight Set 76E.
Incl. glue and O-rings.
Starlight Set 16.
Incl. glue and O-rings.
Basic Set 9 AA.
prev
Print
next
27
Zoom to fit width
Zoom to fit page
Roblon Fiber Optics
Postbox 120
Nordhavnsvej 1
DK-9900 Frederikshavn
Danmark
Tel: + 45 96 20 33 66
Fax:+ 45 96 20 33 96
E-mail: info@roblon.com
www.roblon.com
28
prev