SEE MORE AT SORInc.com
Request Quote
RF Capacitance Level Controls
Features and Benefits
CAC-8A-00-6
681R7
• Reliability
• 316SS, Telflon® or Kynar probes
• Low maintenance costs
• Can be used in virtually every type
of chamber
• No moving parts
• Set point/span are completely adjustable
• Interface measurement with on/off
and continuous output
• Withstands temperatures up to
400oF (204oC)
• Unaffected by changes in pressure, temperature, specific gravity, vapor or density
• Versatile - can be used with both
conductive and non-conductive
substances. Manages a variety of liquids, granular solids, powders and slurries.
• Withstands pressure up to 2000 psig
(138 bar)
Agency Listings/Certification
• Select models with CSA, FM, IECEx,
INMETRO, Rostechnadzor (RTN)
• Meets most code and customer
requirements.
• Dielectric range is unlimited
Form 1100 (12.15) ©SOR Inc.
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
1/28
RF Capacitance
Level Controls
Principle
Non-Conductive Substances
Operating Principle
RF Capacitance level controls are based on an
electronic device called a capacitor. The capacitor
is a device that stores energy. This energy is not
stored in the probe; rather, the RF Capacitance
level control is merely measuring how much energy
can be stored. The amount of capacitance the RF
Capacitance level control is measuring is extremely
small and is measured in picofarads (1 X 10-12)
farads.
The structure of the capacitor actually changes in
a level application. One plate is the probe and the
other is the wall of the tank (see following figure).
These do not change, nor does the distance
between them. The only thing that changes is the
dielectric constant. Air has a dielectric constant of
one; anything else you measure will have dielectric
value greater than one.
Bare Metal
Probe
The capacitor is made up of two conductive plates
parallel to each other. Separating the two plates is
an insulator.
Metal
Tank Wall
Hydrocarbon
Conductive
Plate
Insulating Medium
Conductive
Plate
The amount of energy a capacitor can store is
influenced by several things. First, a larger plate
area results in more space to store energy.
Second, more space between the plates reduces
the amount of energy storage. Finally, a higher
dielectric constant media can contain more energy
than a lower dielectric media. The dielectric is
where the actual capacitance is developed. The
following chart shows the dielectric constant
and conductivity for some sample materials.
When the substance level increases, the
dialectic of the substance is replacing the air
and causes the capacitance to increase. The
preset capacitance value is equal to the set point
level wanted and trips a switch when the level is
reached. The transmitter creates a linear output in
relationship to the capacitance measured.
Conductive Substances
The substance between the two plates has to be
an insulator in order to have a capacitor. When
a conductive material is between the plates, an
electrical short is created. This, in turn, signals the
level transmitter to indicate a high level. A Teflon
insulator around the sensor will prevent this from
happening, as the figure below demonstrates.
Insulated
Probe
Water
Substances are considered either conductive or
non-conductive. Non-conductive materials have a
dielectric less than 10 or a conductivity less than
10µsiemens/cm. Conductive materials have a
dielectric constant greater than 10 or a conductivity
greater than 10 µsiemens/cm. Interestingly, there
is a similar relationship between dielectric constant
and conductivity. Non-conductive substances tend
to have low dielectric constants and conductive
substances tend to have high dielectric constants.
2/28
Registered Quality System to ISO 9001
An electrical connection is created through the
conductive substance from the tank wall and the
Teflon probe. When the level in the tank rises,
the capacitor is created by the metal probe rod,
the substance being measured and the probe
insulator (Teflon), where the sensor rod and
substance are the plates and insulator is the
dielectric. This means that rather than measuring
the dielectric of the substance, the dielectric of
the probe where it is covered by the substance is
being measured.
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
Principle
Restrictions of RF
 Sensitive to changes in material dielectric (Note: dielectric compensation additives help,
but the liquid can stratify.)
 Normally needs field calibration, which requires
a change in level
 Dependent on contact with the substance
being measured
 Conductive coatings can build up on the
sensor and create false readings
The Difference Between
RF Capacitance and
RF Admittance
When there is a conductive coating on the probe,
a non-RF unit will indicate the level at the top of
the coating. By looking at the conductivity, an
RF system can reduce the error caused by the
coating (see following figure). Consider this: At the
actual level, the amount of capacitive reactance
(impedance) is low because the space between
the tank wall and probe is filled with a conductive
liquid. However, at the coating on the probe, there
is also a large air space between the probe and
tank wall. This air space results in a high amount of
capacitive reactance.
RF Unit
Contrary to popular belief, there really isn’t an
application difference between RF Capacitance
and RF Admittance. The only difference is in the
electronics; the overall performance of the unit
remains the same. That’s where the “RF” part
comes in, as the following will explain:
RF measurement is actually measuring
capacitance, as well as capacitance reactance
(impedance). The energy (Radio Frequency) is
traveling from one conductive plate to the other.
The following equation represents capacitance
reactance:
Coating
High Xc
Low Xc
Level
Xc = 1
2πfc
where
Xc = Capacitance Reactance (Ohms)
2π = Radians in a 360o cycle of AC (alternating
current)
f = Frequency of AC (hertz)
C = Capacitance of system (in farads)
Form 1100 (12.15) ©SOR Inc.
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
3/28
RF Capacitance
Level Controls
Principle
The Difference Between RF Capacitance and RF Admittance
Look at the formula for capacitive reactance. Since
we are striving to measure the capacitance, C
cannot change, and 2π is a constant and cannot
change. The only thing left we can change is the
frequency. If the frequency is increased (RF), the
capacitive reactance decreases.
The level is represented on the vertical axis in
these two graphs. Changes in the resistance
are represented on the horizontal axis. A vector
representing a combination of the two (impedance)
is shown to the left. The inverse of this graph is
shown below.
As you can see, an “admittance” measurement is
just the inverse of a capacitance measurement.
The important part, as previously stated, is the “RF.”
Capacitive
Reactance
Impedance
Capacitive
Susceptance
Admittance
Resistance
Conductance
Use this chart to select the RF instrument that best meets your needs.
Designator
Line Power
Loop Power
Integral Mount Electronics
651
Pages 5-6
651
Pages 5-6
Integral Mount Electronics with
Sensor Monitor (Self-Test)
681
Pages 7-8
681
Pages 7-8
Remote Mount Electronics with
Sensor Monitor (Self-Test)
681
Pages 7-8
681
Pages 7-8
660
Pages 9-10
N/A
Single-Point Sensing
Multiple-Point Sensing
Alarm or Pump Control
4/28
Registered Quality System to ISO 9001
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
RF Switches
Single Point
651 Single-Point
RF Switch
The 651 provides basic, single-point switching
for use as an alarm or indicator. It’s virtually
immune to process coatings on the probe,
making it a useful solution for many tough level
applications. This immunity, combined with the
absence of any moving parts, makes the 651
well suited for applications that are difficult for
other technologies.
Features
Economical point sensing
Suitable for 12 VDC service

FM Approved, CSA Certified hazardous
locations, IEC Certified

Field-selectable failsafe


Product Specifications
Input Power - Line
Input Power - Loop
Output Type - Line
12-28 VDC
10A DPDT, 250 VAC
10A DPDT, 30 VDC
DC rating shown for resistive loads 5A DPDT for 12 VDC input power
Output Type - Loop
Loop Resistive
120 VAC, 50/60 Hz
240 VAC, 50/60 Hz
24 VDC
12 VDC
8 mA (alarm), 16 mA (normal)
Response Time
0.5 seconds
Enclosure
Environmental Rating
NEMA 4X; IP65
Electrostatic
Discharge Protection
Line Surge Suppression
8000 volts (Line)
4000 volts (Loop)
1000 volts line
voltage EMC
Conduit Connection
3/4” NPT
Ambient
Temperature Range
-40 to 160oF (-40 to 71oC)
Process Temperature Range
Probe Dependent
Maximum
Process Pressure
Weight
Probe Dependent
780 ohms maximum @ 24 VDC
Adjustment Range
Sensitivity
0 to 1000 pF
0.5 pF
Repeatability0.5%
FailsafeField-selectable
Maximum Current Draw (line power)
Form 1100 (12.15) ©SOR Inc.
12 VDC - 100 mA
24 VDC - 50 mA
120 VAC - 20 mA
240 VAC - 10 mA
SORInc.com
2.5 lbs. (1.2 kg)
| 913-888-2630 | Registered Quality System to ISO 9001
5/28
RF Capacitance
Level Controls
How to Order
The 651 consists of two parts. The first is the electronics and housing. The second is the probe. For probe
types and model numbers, see pages 21-25.
Model Number System
651 K-7-TTYY
2
651 RF Admittance Switch with 120
VAC power supply, oversized nameplate
and epoxy-coated housing.
Power Supply
1
12 VDC
5
24 VDC
6
120 VAC
7
240 VAC
8
12 - 28 VDC
9
(Loop)
*Electronics and probe must
have the same agency to
maintain the listing integrity
(i.e. CS or AI electronics
with CS probe, or FM or FI
electronics with FM probe).
651K
7
Accessories & Certificates
Al
CSA Intrinsically Safe*
CS
CSA Explosion Proof Listing*
Fl
FM Intrinsically Safe*
FM
FM Explosion Proof Listing*
MB
IEC Certified Intrinsically Safe*
NM
INMETRO approved*
OD
60-second time delay ON, 0.5-second delay OFF
OF
60-second time delay OFF, 0.5-second delay ON
PP
Fiber tag with customer-specified tag information
PY
Powder Coat epoxy coating. No coating on stainless steel parts or plated screws. (500 hours-salt spray)
RR
SS wired on nameplate with customer-specified information
TT
SS nameplate permanently affixed to housing with
customer-specified tag information
V V
Fungicidal varnish applied to housing exterior
YY Epoxy coating applied to housing exterior
(200 hours-salt spray)
C1
C3 C4 C6 Individual Certificates
Certificate of Calibration
Inspection
Compliance/Conformance
Insulation Resistance
TT YY
Model Number
Agency Approval
Agency
6/28
Safety Method
Approval
Model(s)
FM
Explosion Proof
Intrinsically Safe
CSA
Explosion Proof
Intrinsically Safe
IEC
Intrinsically Safe
Class I, Groups C, D
Class II, Groups E, F, G
Class III, Division 1
Class I, Groups A, B, C, D
Class II, Groups E, F, G
Class III, Division 1
Class I, Groups C, D
Class II, Groups E, F, G
Class III, Division 1
Class I, Groups A, B, C, D
Class II, Groups E, F, G
Class III, Division 1
Ex ia IIB T4
651Kx-FM
INMETRO
Ex ia IIB T4
651K9-NM
Intrinsically Safe
Registered Quality System to ISO 9001
| 913-888-2630 | SORInc.com
651Kx-FI
651Kx-CS
651K9-AI
651K9-MB
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
RF Switches Single Point
681 Single-Point
RF Switch with Self Test
Available as an integral or remote-mounted unit,
the 681 provides single-point switching, and with
its many safe and operation features, is well suited
for demanding industrial applications.
Its “Self-Check” function constantly monitors
circuit and probe integrity. A dedicated relay (line
powered) or current shift (loop powered) indicates
if the unit is not functioning properly. An optional,
adjustable differential provides control of two set
points with one relay, which gives the 681 pump
and valve control for maintaining correct process
levels.
Features
Continuous self testing (Self-Check) verifies operation of the unit

Optional adjustable differential for pump/valve control

Available as integral or remote-mounted

Field-selectable failsafe

Optional on/off time delay eliminates effects
of turbulence

Resists process media coating

Product Specifications
Input Power - Line
Input Power - Loop
120 VAC, 50/60 Hz
240 VAC, 50/60 Hz
24 VDC, 12 VDC
Repeatability0.5%
10-30 VDC
Maximum Current Draw (line power) 12 VDC - 100 mA
24 VDC - 100 mA
120 VAC - 25 mA
240 VAC - 13 mA
Output Type - Line
Alarm
10A DPDT, 250 VAC
10A DPDT, 30 VDC
Sensor Monitor
10A DPDT, 250 VAC
10A DPDT, 30 VDC
DC rating shown for
resistive loads
Output Type - Loop
Alarm
Sensor Monitor
Loop Resistance
FailsafeField-selectable
Response Time 0.1 second
Enclosure Environmental Protection
Electrostatic Discharge Protection
8 mA (Alarm), 16 mA (Normal)
24-27 mA
456 ohms maximum @ 24 VDC
Adjustment Range
Sensitivity
Adjustment Range
(Adjustment Differential)
Form 1100 (12.15) ©SOR Inc.
0 to 1000 pF
NEMA 4X; IP65
8000 volts (line)
4000 volts (loop)
Line Surge Suppression 1000 volts line voltage EMC
Conduit Connection
3/4” NPT
Maximum Remote
Distance from Sensor
150 ft. (45.7 m)
0.5 pF
Range I: 0 to 300 pF
0.5 pF sensitivity
Range II: 300 to 1000 pF
1.0 pF sensitivity
SORInc.com
Ambient Temperature Range
Probe Dependent
Maximum Probe Pressure
Probe Dependent
Weight
3 lbs. (1.4 kg)
plus 2 lbs. (1 kg) for remote
| 913-888-2630 | Registered Quality System to ISO 9001
7/28
RF Capacitance
Level Controls
How to Order
The 681 consists of two parts. The first is the electronics and housing. The second is the probe. For probe
types and model numbers, see pages 21-25.
Model Number System
681 K-7-TTYY
The 681 RF Admittance Switch with 120 VAC power supply, oversized nameplate and epoxy-coated
housing.
2
Electrical Housing
Integral Housing
K
Remote housing: 150 ft. (45m)
maximum
R
Order remote cable part #2924-113
and specify length in feet
5
6
7
8
9
1
Power Supply
12 VDC
24 VDC
120 VAC
240 VAC
10 to 30 VDC (Loop)
3
AD
Adjustable differential
(do not use DT accessory)
BK
Remote electronics flat-surface mounting
bracket (R housing only)
PK
Pipe mounting kit - BK accessory required
(R housing only)
PP
Fiber tag with customer-specified
information
PY
Powder Coat epoxy coating. No coating on stainless steel parts or plated screws. (500 hours-salt spray)
RR
SS wired-on nameplate with customer
information
TT
SS nameplate permanently affixed to
housing with customer-specified information
VV
Fungicidal varnish applied to housing exterior
YY
Epoxy coating applied to housing exterior
(200 hours-salt spray)
C1 C3 C4 C6 Individual Certificates
Certificate of Calibration
Inspection
Compliance/Conformance
Insulation Resistance
681
K
7
Accessories & Certificates
TT YY
Model Number
Agency Approval
There are no third-party approvals at this time.
8/28
Registered Quality System to ISO 9001
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
RF Switches
Multi-Point
660 Series Multi-Point
RF Switch
The 660 Series provides the options of multiplepoint switching plus narrow and wide differential
switching. By combining these features, the
660 Series units can be used for a wide variety
of control needs. The available switching
combinations are designed to provide multiple
alarms, pump/valve control, or a combination of
alarms and equipment control. The 660 Series
makes it possible to combine up to four singlepoint devices into one package for lower costs
and reduced maintenance.
Features

Up to 4-point indication
Suitable for 12 VDC service
 FM Approved and CSA Certified for
hazardous locations
 Field-selectable failsafe
 Resists process media coating

Switching Combinations
The 660 Series has eight different combinations
of fixed differential and/or adjustable differential
switching points. Each unit is equipped with one
of four discreet switching points. These points can
be used to provide true point level sensing with
no level differential, or latched together to provide
wide, adjustable differential.
See page 11 for available combinations. Required
combinations are selected using step 1 in the
How to Order chart on page 10.
Product Specifications
Input Power
120 VAC, 50/60 Hz
240 VAC, 50/60 Hz
24 VDC, 12 VDC
Output Type
10A DPDT, 250 VAC
10A DPDT, 30 VDC
DC rating shown for
resistive loads
Adjustment Range
Sensitivity
0 to 2000 pF
0.5 pF
Repeatability0.5%
FailsafeField-selectable
Maximum Current
Draw Response Time Time Delay (optional)
Form 1100 (12.15) ©SOR Inc.
12 VDC - 245 mA
24 VDC - 123 mA
120 VAC - 74 mA
240 VAC - 36 mA
0.5 second (standard)
0 to 30 seconds
SORInc.com
Enclosure
Environmental Protection
Electrostatic
Discharge Protection
Line Surge Suppression
Conduit Connection
Maximum Remote
Distance from Sensor
NEMA 4X; IP65
8000 volts
1000 volts line
voltage EMC
1” NPT(F)
4000 feet (1219.2 m)
Ambient
Temperature Range
-40 to 160oF (-40 to 71oC)
Process
Temperature Range
Probe Dependent
Maximum Probe Pressure
Probe Dependent
Weight
J Housing: 9 lbs. (4.1 kg)
R Housing: 11 lbs. (5 kg)
W Housing: 6 lbs. (2.7 kg)
| 913-888-2630 | Registered Quality System to ISO 9001
9/28
RF Capacitance
Level Controls
How to Order
The Series 660 is comprised of two parts. The first is the electronics and housing. The second is the probe.
Refer to pages 21-25 for probe model number.
Model Number System
3
66 3 J5-TDVV
663 RF Admittance 3-point switch with 12 VDC power
supply, time delay and fungicidal varnished housing.
Electrical Housing
Integral housing
J
Explosion-proof remote housing
(4000 feet [1219.m] maximum)
R
2
Switching Combination
Power Supply
5
6
7
8
12 VDC
24 VDC
120 VAC
240 VAC
4
1
See page 11 for switching combinations.
Single fixed differential switching point
1
Two fixed differential switching points
2
Three fixed differential switching points
3
Four fixed differential switching points
4
Single adjustable differential switching
High-level fixed differential point and
adjustable differential switching
5.
6
Single adjustable differential and low-
level fixed differential point switching
7
High- and low-level fixed differential points
and adjustable differential switching
8
*Electronics and probe must have the same
agency to maintain the listing integrity (i.e.
CS or AI electronics with CS probe, or FM
or FI electronics with FM probe).
66
3
J
5
Accessories
& Certificates
BK
Remote electronics flat
surface mounting bracket
(R housing only)
CS
CSA explosion-proof listing*
FM
FM explosion-proof listing*
PK
Pipe mounting kit- BK accessory required (R housing only)
PP
Fiber tag with customerspecified information
PY
Powder Coat epoxy coating. No coating on stainless steel parts or plated screws.
(500 hours-salt spray)
RR
SS wired-on nameplate with
customer-specified information
TD
Time delay for each fixed
differential set point
TT
SS nameplate permanently
affixed to housing with
customer-specified information
VV
Fungicidal varnish applied to
housing exterior
YY
C1
C3
C4
C6
Epoxy coating applied to housing exterior (200 hours-salt spray)
TD VV
Individual Certificates
Certificate of Calibration
Inspection
Compliance/Conformance
Insulation Resistance
Model Number
Agency Approval
Agency
10/28
Safety Method
FM
Explosion Proof
CSA
Explosion Proof
Approval
Model(s)
Class I, Groups B, C, D
Class II, Groups E, F, G
Class III, Division 1
Class I, Groups C, D
Class II, Groups E, F, G
Class III, Division 1
66x-Jx-FM
66x-Jx-FM
Registered Quality System to ISO 9001
66x-Jx-CS
66x-Rx-CS
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
RF Switches
Multi-point
Connection Cable
Remote units require #22AWG shielded twisted pair cable to connect the control to the probe. The maximum
length of this cable is 4000 feet (1219.2m).
A 25 ft. (7.6m) cable is supplied with each unit. Other lengths can be ordered per the information below. The
cable glands supplied with the unit must be replaced with suitable fittings when installing conduit.
Specific length cable
Part Number 2924-103 Specify length and units
1000 ft. (305m) reel
Part Number 2924-102 (reel is non-returnable)
Order cable by the part numbers listed below.
Series 660 Switching Combinations
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Fixed
Differential
Form 1100 (12.15) ©SOR Inc.
SORInc.com
Fixed
Differential
| 913-888-2630 | Registered Quality System to ISO 9001
11/28
RF Capacitance
Level Controls
RF Transmitter
670 RF Transmitter
The 670 provides continuous level measurement
and a 4-20 mA linear output. It is a high-performance,
general-purpose level transmitter that is well
suited for many demanding applications that other
technologies cannot handle.
Features

FM Approved, CSA Certified hazardous
locations
 Easy calibration
 Electrostatic discharge protection up to
4000 volts

Resists process media coating
Product Specifications
Input Power 12-55 VDC 12-30VDC for
Intrinsically Safe
Output Type
4-20 mA
Loop Resistance
600 ohms maximum
@ 24 VDC
Zero Range
0 to 500 pF
Span Range
50 to 2000 pF
Accuracy
+1.0% of span
Linearity
+0.5% of full scale
Sensitivity
Repeatability
Response Time
12/28
0.5 pF
+0.5% of full scale
0.1 second
Registered Quality System to ISO 9001
Enclosure
Environmental Rating
Electrostatic
Discharge Protection
Conduit Connection
NEMA 4X; IP65
4000 volts
3/4” NPT
Maximum Remote
Distance from Sensor
10 ft. (3m)
Ambient
Temperature Range
-40 to 160oF (-40 to 71oC)
Process Temperature Range
Probe Dependent
Maximum Process Pressure
Probe Dependent
Weight
| 913-888-2630 | SORInc.com
2.5 lbs. (1.2 kg)
plus 2 lbs. (1 kg) for remote
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
How to Order
The 670 consists of two parts. The first is the electronics and housing. The second is the probe. For probe types
and model numbers, see pages 21-25.
Model Number System
670 R 9-BKPK
670 RF Transmitter with loop-powered
remote housing, flat-surface mounting
bracket and pipe mounting kit.
2
Accessories & Certificates
Al
CSA Intrinsically Safe*
BK
Remote electronics flat surface mounting
bracket (R housing only)
1
CS
CSA Explosion Proof*
FI
FM Intrinsically Safe*
Integral Housing
K
FM
FM Explosion Proof*
Remote housing -
10
feet
(3m) maximum
1010
R
PK
Pipe mounting kit - BK accessory required
(R housing only)
Order remote cable as 670-XX-S
XX= cable length in feet
PP
Fiber tag with customer-specified information
PY
Powder Coat epoxy coating. No coating on stainless steel parts or plated screws. (500 hours-salt spray)
RR
SS nameplate permanently affixed to housing
with customer-specified information TT
SS nameplate permanently affixed to housing
VV
Fungicidal varnish applied to housing exterior
YY
Epoxy coating applied to housing exterior
(200 hours-salt spray)
C1 C3 C4 C6 Individual Certificates
Certificate of Calibration
Inspection
Compliance/Conformance
Insulation Resistance
Electrical Housing
*Electronics and probe must have the
same agency to maintain the listing
integrity (i.e. CS or AI electronics with
CS probe, or FM or FI electronics
with FM probe).
670
R
9 BK PK
Model Number
Agency Approval
Agency
Safety Method
Approval
Model(s)
FM
Explosion Proof
Intrinsically Safe
CSA
Explosion Proof
Intrinsically Safe
Class I, Groups C, D
Class II, Groups E, F, G
Class III, Division 1
Class I, Groups A, B, C, D
Class II, Groups E, F, G
Class III, Division 1
Class I, Groups C, D
Class II, Groups E, F, G
Class III, Division 1
Class I, Groups A, B, C, D
Class II, Groups E, F, G
Class III, Division 1
670x9-FM
Form 1100 (12.15) ©SOR Inc.
SORInc.com
670x9-FI
670x9-CS
670x9-AI
| 913-888-2630 | Registered Quality System to ISO 9001
13/28
RF Capacitance
Level Controls
Housing: K for Model 651
Dimensions
in this catalog are for reference
only. They may be changed
without
notice. Contact
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
the factory for certified drawings for a particular model number. Dimensions in this catalog are
PROCESS CONNECTION
expressed as millimeters over inches. 116.7
(Linear = mm/in.)
4.59
Linear = mm
in.
MODEL #
MODEL #
SALES ORDER #
SALES ORDER #
LINE ITEM #
116.7
4.59 SALES ORDER #
116.7
4.59
96.0
116.7
3.78
4.59
96.0
3.78
96.0
3.78
C
1
STILLING WELL
PROCESS
CONNECTION
SEE TABLE
A LENGTH
(PER MODEL NUMBER)
B
1
PROCESS
CONNECTION
SEEPROCESS
TABLE
CONNECTION
SEE TABLE
INACTIVE SHEATH LENGTH
(PER MODEL NUMBER)
B
1
1
D
Model Name: 0390652.ASSEM/2/0+
(PER MODEL NUMBER)
19.1
0.75
(INACTIVE SHEATH ONLY)
D
D
B
19.1
0.75
(INACTIVE
SHEATH
ONLY)
INACTIVE
SHEATH
LENGTH
(PER MODEL NUMBER)
INACTIVE SHEATH LENGTH INACTIVE
SHEATH LENGTH
(PER MODEL NUMBER)
(PER MODEL NUMBER)
SENSOR STYLE
A LENGTH
(PER MODEL
A NUMBER)
LENGTH
BARE
19.1
0.75
19.1
(INACTIVE
SHEATH ONLY)
0.75
(INACTIVE SHEATH ONLY)
D
Model Name: 0390652.ASSEM/2/0+
SHEATH
BARE WITH
STILLING WELL
SHEATH WITH
STILLING WELL
CABLE
INACTIVE SHEATH
Model Name: 0390652.ASSEM/2/0+
14/28
120.0
4.72
N/A
237.5
9.35
ON A FIVE THREAD ENGAGEMENT.
C
1
N/A
CABLE
PROBE
87.8
3.46
99.7
3.92
1
158.5
6.24
ELECTRICAL
NOTES:
PROCESS
CONNECTION
B
1 NOTES:
CONNECTION
3/4 NPTF
1. DIMENSION APPROXIMATE AND BASED
1
ELECTRICAL
SEE
TABLE
NOTES:
ON ABASED
FIVE THREAD ENGAGEMENT.
CONNECTION
1. DIMENSION APPROXIMATE AND
1
3/4 NPTF
ON A FIVE THREAD
ENGAGEMENT.
1. DIMENSION APPROXIMATE AND BASED
1
ELECTRICAL
CONNECTION
3/4 NPTF
C
1
DIM B
ALL OTHER
CA
PROBES
PR
94.1
20
3/4 NPTM
3.71
8
97.3
21
1, 1-1/2, & 2 NPTM
1
SALES PAGE
3.83
8
LINE ITEM #
PURCHASE ORDER #
SALES PAGE
158.5
27
FLANGED
PURCHASE ORDER #
6.24
10
DIM B
DIM C
1
SALES PAGE
120.0
PROCESS
CONNECTION
DIM
B
DIM C
LINE ITEM #
PURCHASE ORDER #
STILLING
WELL
N/A CABLE
N
CABLE
ALL OTHER
ALL
OTHER
4.72
PROCESS CONNECTION
PROBE ALL OTHER
PROBES
PROBE
PROBES
CABLE
ALL OTHER
CABLE
DIM B
DIM C
PROBE CONNECTION
PROBES
PROBE
PROBES
87.8
94.1
205.2
211.6
PROCESS
3/4 NPTM
CABLE
OTHER
CABLE
3.46 ALL211.6
3.71
8.08 ALL OTHER
8.33
87.8
94.1
205.2
3/4 NPTM
PROBE
PROBES
PROBE
3.46
3.71
8.08
8.33
99.7
97.3
217.2 PROBES
214.8
ELECTRICAL
1, 1-1/2, & 2 NPTM NOTES:
87.8
94.1
205.2
211.6
3.92
3.83
8.55
8.46
CONNECTION
99.73/4 NPTM97.3
217.2
214.8
1, 1-1/2,
&
2
NPTM
3.46
3.71
8.08
8.33
3/4 NPTF
3.92
3.83
8.55
8.46
158.5
158.5
276.0BASED 276.0
1. DIMENSION
APPROXIMATE
AND
FLANGED1
99.7
97.3
217.2
214.8
6.24ENGAGEMENT.
10.87
10.87
ON6.24
A FIVE THREAD
1, 1-1/2, & 2 NPTM
158.5
158.5
276.0
276.0
3.92
3.83
8.55
8.46
FLANGED
6.24
6.24
10.87
10.87
120.0
237.5
STILLING WELL
N/A
N/A
158.5
158.5
276.0
276.0
4.72
9.35
FLANGED120.0
237.5
6.24
6.24
10.87
10.87
STILLING WELL
N/A
N/A
4.72
9.35
96.0
3.78
Drawing 0390652
GTH
NUMBER)
+
Dimensions
Registered Quality System to ISO 9001
| 913-888-2630 | SORInc.com
ISO-9001
SENSOR STYLE
D
14685 W 105TH
91
SO
PRODUCT CERTIFICATION DRA
ALL DIMENSIONS ARE ±1/1
UNLESS OTHERWISE SPECI
12.7
BARE
MM
0.50
LINEAR =
IN
15.9
SHEATH
0.63
DRAWING KS
IS THE
EXCLUS
14685 W 105THTHIS
ST LENEXA,
66215
U
NO
USE WHATSOEVER OF THE IN
BARE WITH
26.7
913-888-2630
HEREON, NOR REPRODUCTION IN
14685STILLING
W 105TH ST
LENEXA, KS 66215
USA
SORINC.COM
WELL
1.05
14685
W
105TH
ST
LENEXA,
KS
66215
USA
MADE
WITHOUT
THE
EXPRESS
WRI
ISO-9001
913-888-2630
913-888-2630
DRAWN BY
TITLE
SHEATHSORINC.COM
WITH
26.7
SORINC.COM
ISO-9001
ISO-9001
K MITCHELL
DIMENSION DRAWING
RF PROB
STILLING
1.05
DRAWN BY
SENSOR STYLE
D WELLPRODUCT
DRAWN BY
CERTIFICATION DRAWING
CHECKED BY
MODEL
651
(K
HOUSING
CONFI
K DIMENSIONS
MITCHELL
ALL
7.90 ARE ±1/16 IN K MITCHELL
D SENSOR
M SMITH
PRODUCT
DRAWING
DRAWIN
STYLECERTIFICATION
D
PRODUCT
CERTIFICATION
DRAWING
CABLE
CHECKED
BY
UNLESS
OTHERWISE
SPECIFIED
CHECKED
BY
EO
NUMBER:
5200
12.7
ENGINEER APPROVAL
0.31ARE ±1/16
ALL DIMENSIONS ARE
±1/16 IN ALL DIMENSIONS
IN
BARE
MM
M SMITH
M SMITH
0.50
LINEAR =
UNLESS OTHERWISE
SPECIFIED UNLESS
S BOAL
12.7
OTHERWISE
SPECIFIED
12.7
SCALE:
0.65
ENGINEER15.9
APPROVAL
IN
ENGINEER APPROVAL
BARE
DATE
MM SHEATH
MM
INACTIVE
SH
0.50
15.9
LINEAR
=0.50
LINEAR
=
S BOAL
S PRINT
BOAL
DO NOT SCALE
0.63
IN
IN
SHEATH
07 MAR 201
DATE
DATE
0.63
15.9
15.9
THIS
DRAWING
IS
THE
EXCLUSIVE
PROPERTY
OF
SOR.
SHEATH
07 MAR 2013
07 MAR 2013
0.63
0.63
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
BARE WITH
26.7
THIS
DRAWING
THE EXCLUSIVE PROPERTY
THIS DRAWING IS THE EXCLUSIVE PROPERTY
OF
SOR.
HEREON,
NORISREPRODUCTION
IN WHOLEOF
ORSOR.
PART MAY BE
WELL
NOMADE
USE
WHATSOEVER
OF EXPRESS
THE INFORMATION
CONTAINED OF SOR.
BARE WITH
NO USE
WHATSOEVER26.7
OF1.05
THE INFORMATION
CONTAINED
WITHOUT THE
WRITTEN PERMISSION
26.7 STILLING
HEREON,
NOR
REPRODUCTION
IN
WHOLE
OR
PART
MAY BE
HEREON,
NOR REPRODUCTION
IN WHOLE OR PART MAY BE
WELL
1.05
1.05 STILLING
MADE
WITHOUT
THE
EXPRESS
WRITTEN
PERMISSION
OF
SOR.
TITLE
SHEATH
WITH
26.7
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
WITH
26.7
STILLING
WELL
1.05 TITLE DIMENSION DRAWING RF PROBE
TITLE
26.7 SHEATH
MODEL 651
(K HOUSING
CONFIGURATION)
DRAWING
RF PROBE
WELLDRAWING1.05
DIMENSION
RF7.90
PROBEDIMENSION
1.05 STILLING
DRAWING NUMBER
REV
MODEL
651 (K HOUSING
CABLE
EO NUMBER:
5200 CONFIGURATION)
MODEL
651 (K HOUSING
CONFIGURATION)
7.90
0.31
DRAWING NUMBER
7.90
CABLE
0390652 REV
3
NUMBER:
5200
DRAWING EO
NUMBER
REV
EO NUMBER: 5200 0.31
SCALE: 0.65
0390652
3 DWG S
0.31
15.9 0390652
3
INACTIVE SHEATH
SHEET 1 OF 2
SCALE: 0.65
DWG SIZE
15.9
DO NOT SCALE PRINT
0.63
SCALE:
0.65
B
INACTIVE
SHEATH
DWG SIZE
15.9
SHEET 1 OF 2
0.63 SHEET 1DO NOT
B
OFSCALE2 PRINT
DO NOT SCALE PRINT
0.63
B
Reset Fo
Reset Form
Reset Form
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
Dimensions
Housing: K for Model 651
Drawing 0390652
2
SALES PAGE
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
D
36.5
1.44
3/4-16 UNF-2B X
31.8
1.25
11.1
0.44
22.2
0.88
DETAIL A
SCALE 1.5
DUAL RIGID PROBE DETAIL
50.8
2.00
28.4
1.12
Linear = mm
in.
MINIMUM CLEARANCE HOLE
FOR INSTALLATION
54.9
2.16
ISO-9001
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
DRAWN BY
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
SEE DETAIL A
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
07 MAR 2013
27.0
1.06
DUAL CABLE PROBE DETAIL
31.8
1.25
54.0
2.13
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
DIMENSION DRAWING RF PROBE
MODEL 651 (K HOUSING CONFIGURATION)
EO NUMBER: 5200
SCALE: 0.50
DO NOT SCALE PRINT
DRAWING NUMBER
Model Name: 0390652.ASSEM/2/0+
Form 1100 (12.15) ©SOR Inc.
REV
0390652
3
SHEET 2 OF 2
DWG SIZE
B
Reset Form
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
15/28
RF Capacitance
Level Controls
Dimensions
Housing: R for Model 670 & 681
Drawing 0390653
1
SALES PAGE
MODEL #
SALES ORDER #
SENSOR STYLE
BARE
SHEATH
BARE WITH
STILLING WELL
SHEATH WITH
STILLING WELL
CABLE
INACTIVE SHEATH
LINE ITEM #
PURCHASE ORDER #
DIM B
DIM D
1
DIM C
PROCESS CONNECTION
NOTES:
12.7
0.50
15.9
0.63
26.7
1.05
26.7
1.05
7.9
0.31
15.9
0.63
1. DIMENSION APPROXIMATE AND BASED
ON A FIVE THREAD ENGAGEMENT.
3/4 NPTM
1, 1-1/2, & 2 NPTM
Linear = mm
in.
FLANGED
STILLING WELL
CABLE
ALL OTHER
CABLE
ALL OTHER
87.8
3.46
99.7
3.92
158.5
6.24
94.1
3.71
97.3
3.83
158.5
6.24
120.0
4.72
152.9
6.02
164.8
6.49
223.7
8.81
159.2
6.27
162.4
6.39
223.7
8.81
185.1
7.29
N/A
N/A
118.6
4.67
96.0
3.78
116.7
4.59
3/4 NPTF
ELECTRICAL CONNECTION
C
1
PROCESS
CONNECTION
SEE TABLE
213.5
8.41
1
B
ISO-9001
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
DRAWN BY
45.2
1.78
INACTIVE SHEATH LENGTH
(PER MODEL NUMBER)
A LENGTH
(PER MODEL NUMBER)
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
07 MAR 2013
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
19.1
0.75
(INACTIVE SHEATH ONLY)
96.0
3.78
2X 3/4 NPTF
K MITCHELL
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
TITLE
DIMENSION DRAWING RF PROBE
MODEL 670 & 681 (R HOUSING CONFIGURATION)
D
ELECTRONICS HOUSING
DRAWING NUMBER
EO NUMBER: 5200
SENSOR
REV
0390653
SCALE: 0.50
2
SHEET 1 OF 2
DO NOT SCALE PRINT
Model Name: 0390653.ASSEM/2/3+
DWG SIZE
B
Reset Form
2
SALES PAGE
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
D
36.5
1.44
3/4-16 UNF-2B X
DUAL RIGID PROBE DETAIL
31.8
1.25
50.8
2.00
11.1
0.44
22.2
0.88
DETAIL A
SCALE 1.5
28.4
1.12
MINIMUM CLEARANCE HOLE
FOR INSTALLATION
54.9
2.16
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
ISO-9001
DRAWN BY
SEE DETAIL A
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
07 MAR 2013
DUAL CABLE PROBE DETAIL
27.0
1.06
31.8
1.25
54.0
2.13
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
EO NUMBER: 5200
SCALE: 0.50
DO NOT SCALE PRINT
Model Name: 0390653.ASSEM/2/3+
16/28
Registered Quality System to ISO 9001
Linear = mm
in.
DIMENSION DRAWING RF PROBE
MODEL 670 & 681 (R HOUSING CONFIGURATION)
DRAWING NUMBER
REV
0390653
2
Drawing 0390653
SHEET 2 OF 2
DWG SIZE
B
Reset Form
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
MODEL #
SALES ORDER #
116.7
Housing: K for Model 670 & 681
4.59
96.0
(RF Probe Model 651-K9)
3.78
Drawing 0390654
MODEL #
MODEL #
Linear = mm
in.
SALES ORDER #
SALES ORDER #
116.7
4.59
1
1
96.0
3.78
96.0
3.78
1
LINE ITEM #
116.7
4.59
C
C
PURCHASE ORDER #
DIM B
PROCESS CONNECTION
ALL OTHER
CABLE
PROBES
PROBE
256.0
1 94.1
3/4 NPTM
3.71
10.08
LINE ITEM #
PURCHASE ORDER #
SALES PAGE
97.3
268.0
PURCHASE ORDER #
1, 1-1/2,
DIM
B & 2 NPTM
3.83
10.55
PROCESS CONNECTION DIM B
DIM
C
158.5
158.5
326.8
CABLE
ALL
OTHER
CABLE
ALL OTHER
FLANGED
PROCESS CONNECTION
6.24
12.87
PROBES
PROBES 6.24
CABLE
ALLPROBE
OTHER
CABLE
ALLPROBE
OTHER
120.0
87.8
94.1 WELL PROBES
256.0
PROBES
PROBE
STILLING
N/A262.4
N/A
3/4 NPTMPROBE
4.72
3.46
3.71
10.08
10.33
87.8
94.1
256.0
262.4
3/4 NPTM
99.7
97.3
268.0
265.6
3.46
3.71
10.08
10.33
1, 1-1/2, & 2 NPTM
3.92
3.83
10.55
10.46
99.7
97.3
268.0
265.6
1, 1-1/2, & 2 NPTM
158.5
158.5
326.8
326.8
3.83
10.55
10.46
FLANGED 3.92
6.24
6.24
12.87
12.87
158.5
326.8
326.8
158.5
FLANGED
120.0
288.3
6.24
6.24
12.87
12.87
STILLING WELL
N/A
N/A
4.72
11.35
120.0
288.3
STILLING WELL
N/A
N/A
NOTES:
4.72
11.35
3/4 NPTF
ELECTRICAL CONNECTION
1. DIMENSION APPROXIMATE AND BASED
1
ON A FIVE THREAD ENGAGEMENT.
3/4 NPTF
ELECTRICAL CONNECTION
3/4 NPTF
ELECTRICAL CONNECTION PROCESS
CONNECTION
SEE TABLE
C
Dimensions
LINE ITEM #
CABLE
PROBE
87.8
SALES
PAGE
3.46
1
99.7
DIM
C
3.92
NOTES:
1
1B
NOTES:
1. DIMENSION APPROXIMATE AND BASED
1
ON A FIVE THREAD
1. DIMENSION APPROXIMATE
AND ENGAGEMENT.
BASED
ON A FIVE THREAD ENGAGEMENT.
ISO-9001
PROCESS
CONNECTION
PROCESS
B
1
CONNECTIONSEE TABLE
SENSOR STYLE
INACTIVE SHEATH LENGTH
(PER MODEL NUMBER)
B
1
D
14685 W 105TH ST LE
913-88
SORIN
PRODUCT CERTIFICATION DRAWIN
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
12.7
MM
0.50
LINEAR =
14685 W 105TH ST
LENEXA, KS 66215 USA
IN
SEE TABLE
913-888-2630
15.9USA
14685 W 105TH
ST
LENEXA,
KS
66215
SORINC.COM
SHEATH
ISO-9001
A LENGTH
0.63
913-888-2630
THIS
DRAWING
IS
THE
EXCLUSIVE PR
DRAWN
BY
(PER MODEL NUMBER)
SORINC.COM
ISO-9001
NO USE WHATSOEVER OF THE INFORM
BARE WITH
26.7
K MITCHELL
HEREON, NOR REPRODUCTION IN WHO
SENSOR STYLE
D
BY
19.1 LENGTH
INACTIVE SHEATH
PRODUCT
CERTIFICATION
DRAWING
STILLING
WELL DRAWN
1.05
CHECKED
BY
MADE
WITHOUT THE EXPRESS WRITTEN
ALL DIMENSIONS AREK±1/16
IN
MITCHELL
0.75NUMBER)
(PERLENGTH
MODEL
M
SMITH
SENSOR STYLE
D
INACTIVE SHEATH
PRODUCT
TITLE
SHEATH
WITH CHECKED
26.7
UNLESSDRAWING
OTHERWISE
SPECIFIED
BY
12.7 CERTIFICATION
ENGINEER APPROVAL
(INACTIVE SHEATH ONLY)
BARE
ALL DIMENSIONSSTILLING
ARE ±1/16WELL
IN
MM
(PER MODEL NUMBER)
DIMENSION DRAWING RF PROBE MO
1.05
0.50 OTHERWISE SPECIFIED
LINEAR = M SMITH
S BOAL
UNLESS
12.7
INENGINEER APPROVAL
670, & 681 (K HOUSING CONFIGURA
BARE
DATE
7.90
15.9 LINEAR = MMCABLE
0.50
DRAWING NUM
S BOAL
SHEATH
EO MAR
NUMBER:
07
2013 5200
IN
0.31
A LENGTH
0.63
DATE
03
15.9
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
(PER
MODEL
NUMBER)
SHEATH
D
SCALE: 0.56
07 MAR
2013 CONTAINED
15.9
A LENGTH
NO USE WHATSOEVER OF THE
INFORMATION
BARE WITH
26.7
0.63
INACTIVE
SHEET
HEREON,
NORSHEATH
REPRODUCTION
IN 0.63
WHOLE OR PART MAY
BE
THIS
DRAWING
IS
THE
EXCLUSIVE
PROPERTY
OF
SOR.
19.1
DO
NOT
SCALE
PRINT
(PER MODEL NUMBER)
WELL
1.05
MADE
THE EXPRESS
WRITTEN PERMISSION OF SOR.
NO USE WHATSOEVER
OF WITHOUT
THE INFORMATION
CONTAINED
BARE WITHSTILLING26.7
0.75
Model Name: 0390654.ASSEM/2/3+
HEREON, NOR TITLE
REPRODUCTION IN WHOLE OR PART MAY BE
19.1
SHEATH 1.05
WITH
26.7
STILLING WELL
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
(INACTIVE SHEATH ONLY)
0.75
DIMENSION DRAWING RF PROBE MODEL 651-K9
STILLING
WELL
1.05
TITLE
SHEATH WITH
26.7
670, & 681 (K HOUSING CONFIGURATION)
(INACTIVE SHEATH ONLY)
7.90 DRAWING RF PROBE MODEL 651-K9
DIMENSION
STILLING WELL CABLE
1.05
DRAWING NUMBER
REV
EO NUMBER:
5200
670, &
681 (K HOUSING
CONFIGURATION)
0.31
7.90
0390654
2
DRAWING NUMBER
REV
CABLE
EO NUMBER:
D
SCALE: 0.56
DWG SIZE
15.9 5200
0.31
INACTIVE SHEATH
0390654 SHEET 21 OF 2
DO NOT SCALE PRINT
0.63
B
D
SCALE: 0.56
DWG SIZE
15.9
PAGE2 2
INACTIVE SHEATH
Model Name: 0390654.ASSEM/2/3+
SHEET SALES
1 OF
DO NOT SCALE PRINT
0.63
B
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
Reset Form
BARE
Model Name: 0390654.ASSEM/2/3+
Reset Form
D
36.5
1.44
3/4-16 UNF-2B X
31.8
1.25
11.1
0.44
DUAL RIGID PROBE DETAIL
22.2
0.88
DETAIL A
SCALE 1.5
28.4
1.12
50.8
2.00
MINIMUM CLEARANCE HOLE
FOR INSTALLATION
54.9
2.16
ISO-9001
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
DRAWN BY
SEE DETAIL A
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
07 MAR 2013
DUAL CABLE PROBE DETAIL
27.0
1.06
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
DIMENSION DRAWING RF PROBE MODEL 651-K9
670, & 681 (K HOUSING CONFIGURATION)
54.0
2.13
EO NUMBER: 5200
SCALE: 0.50
DO NOT SCALE PRINT
Model Name: 0390654.ASSEM/2/3+
Form 1100 (12.15) ©SOR Inc.
Linear = mm
in.
31.8
1.25
DRAWING NUMBER
REV
0390654
2
SHEET 2 OF 2
DWG SIZE
B
Reset Form
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
17/28
RF Capacitance
Level Controls
Dimensions
Housing: W for Model 66X
1
SALES PAGE
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
NOTES:
329.4
12.97
273.1
10.75
155.6
6.13
1. DIMENSION APPROXIMATE AND BASED
ON A FIVE THREAD ENGAGEMENT.
1
139.7
5.50
69.9
2.75
209.6
8.25
120.7
4.75
2X 3/4 NPTF
ELECTRICAL CONNECTION
60.3
2.38
251.1
9.89
152.4
6.00
44.5
1.75
148.3
5.84
1
D
1
2X 1/4
MOUNTING HOLES
C
1
B
PROCESS
CONNECTION
SEE TABLE
Linear = mm
in.
2X 3/4 NPTF
ELECTRICAL CONNECTION
INACTIVE SHEATH LENGTH
(PER MODEL NUMBER)
A LENGTH
(PER MODEL NUMBER)
ISO-9001
DRAWN BY
Drawing 0390655
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
19.1
0.75
(INACTIVE SHEATH ONLY)
176.3
6.94
92.1
3.63
4X
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
E
SENSOR
88.9
3.50
K MITCHELL
07 MAR 2013
88.9
3.50
ELECTRONICS HOUSING
SCALE 0.38
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
TITLE
DIMENSION DRAWING RF PROBE
MODEL 66X (W HOUSING CONFIGURATION)
DRAWING NUMBER
EO NUMBER: 5200
7.9
MOUNTING HOLES
0.31
REV
0390655
SCALE: 0.50
2
DWG SIZE
SHEET 1 OF 2
DO NOT SCALE PRINT
Model Name: 0390655.ASSEM/1/2+
B
Reset Form
2
SALES PAGE
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
DIM B
PROCESS CONNECTION
3/4 NPTM
1, 1-1/2, & 2 NPTM
FLANGED
CABLE
PROBE
113.2
4.46
125.1
4.92
183.9
7.24
STILLING WELL
N/A
DIM C
ALL OTHER
PROBES
119.5
4.71
122.7
7.83
183.9
7.24
145.4
5.72
CABLE
PROBE
157.6
6.21
169.5
6.67
228.4
8.99
N/A
DIM E
ALL OTHER
PROBES
164.0
6.46
167.1
6.58
228.4
8.99
189.8
7.47
CABLE
PROBE
174.7
6.88
186.6
7.35
245.5
9.66
N/A
ALL OTHER
PROBES
181.0
7.13
184.2
7.25
245.5
9.66
206.9
8.15
SENSOR STYLE
D
12.7
0.50
15.9
0.63
26.7
1.05
26.7
1.05
7.90
0.31
15.9
0.63
BARE
SHEATH
31.8
1.25
50.8
2.00
BARE WITH
STILLING WELL
SHEATH WITH
STILLING WELL
DUAL RIGID PROBE DETAIL
28.4
1.12
D
CABLE
MINIMUM CLEARANCE HOLE
FOR INSTALLATION
54.9
2.16
SEE DETAIL A
INACITIVE SHEATH
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
ISO-9001
DRAWN BY
36.5
1.44
27.0
1.06
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
11.1
0.44
22.2
0.88
DETAIL A
SCALE 1.5
54.0
2.13
DUAL CABLE PROBE DETAIL
18/28
Registered Quality System to ISO 9001
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
07 MAR 2013
TITLE
DIMENSION DRAWING RF PROBE
MODEL 66X (W HOUSING CONFIGURATION)
EO NUMBER: 5200
SCALE: 0.50
DO NOT SCALE PRINT
Model Name: 0390655.ASSEM/1/2+
CHECKED BY
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
31.8
1.25
3/4-16 UNF-2B X
K MITCHELL
DRAWING NUMBER
REV
0390655 = mm2
Linear
SHEET 2 OF 2 in.
B
DWG SIZE
Reset Form
Drawing 0390655
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
MODEL #
SALES ORDER #
Housing: J for Model 66X
MODEL
MODEL# #
Drawing 0390656
SALES
SALESORDER
ORDER# #
Linear = mm
in.
Dimensions
LINE ITEM #
PURCHASE ORDER #
DIM B
180.9
7.12
PROCESS CONNECTION
LINE
LINEITEM
ITEM# #
CABLE
PROBE
SALES
SALESPAGE
PAGE 1 1
72.3
3/4 NPTM
2.85
84.2
DIM
DIMB B
DIM
DIM
C
C
1, 1-1/2, & 2 NPTM
3.31
CABLE
CABLE ALL
ALLOTHER
OTHER CABLE
CABLE ALL
ALLOTHER
OTHER
143.0
PROBE
PROBE
PROBES
PROBES FLANGED
PROBE
PROBE
PROBES
PROBES 5.63
72.3
72.3
78.6
78.6
299.3
299.3
305.6
305.6
WELL 12.03
2.85
2.85
3.10
3.10 STILLING
11.78
11.78
12.03 N/A
101.6
4.00
PURCHASE
PURCHASEORDER
ORDER# #
180.9
180.9
7.12
7.12
PROCESS
PROCESSCONNECTION
CONNECTION
101.6
101.6
4.00
4.00
3/4
3/4NPTM
NPTM
84.2
84.2
3.31
3.31
143.0
143.0
5.63
5.63
1,1,1-1/2,
1-1/2,&&2 2NPTM
NPTM
FLANGED
FLANGED
STILLING
STILLINGWELL
WELL
1
81.8
81.8
3.22
3.22
183.9
183.9
7.24
7.24
104.5
104.5
4.11
4.11
N/A
N/A
311.2
311.2
12.25
12.25
370.1
370.1
14.57
14.57
308.8
308.8
12.16
12.16
370.1
370.1
14.57
14.57
331.5
331.5
13.05
13.05
N/A
N/A
CC
1.1.DIMENSION
DIMENSIONAPPROXIMATE
APPROXIMATEAND
ANDBASED
BASED
ON
ONAAFIVE
FIVETHREAD
THREADENGAGEMENT.
ENGAGEMENT.
11
ELECTRICAL
ELECTRICALCONNECTION
CONNECTION
1 1NPTF
NPTFSTANDARD
STANDARD
3/4
3/4NPTF
NPTFOPTIONAL
OPTIONAL
PROCESS
CONNECTION
SEE TABLE
1
B
ISO-9001
SENSOR STYLE
PROCESS
PROCESS
CONNECTION
CONNECTION
SEE
SEETABLE
TABLE
11
A LENGTH
(PER MODEL NUMBER)
19.1
19.1
0.75
0.75
(INACTIVE
(INACTIVESHEATH
SHEATHONLY)
ONLY)
BB
INACTIVE SHEATH LENGTH
(PER MODEL NUMBER)
SENSOR
SENSORSTYLE
STYLE
SHEATH
SHEATH
BARE
BAREWITH
WITH
STILLING
STILLINGWELL
WELL
SHEATH
SHEATHWITH
WITH
STEALING
STEALINGWELL
WELL
D
CABLE
CABLE
DD
MODEL
Model
Model
Name:
Name:
0390656.ASSEM/1/4
0390656.ASSEM/1/4
#
INACTIVE
INACTIVESHEATH
SHEATH
SALES ORDER #
D
LINE ITEM #
ISO-9001
ISO-9001
DD
12.7
12.7
0.50
0.50
15.9
15.9
0.63
0.63
26.7
26.7
1.05
1.05
26.7
26.7
1.05
1.05
7.90
7.90
0.31
0.31
15.9
15.9
0.63
0.63
BARE
14685
14685
WW
105TH
105TH
STST
LENEXA,
LENEXA,
KSKS
66215
66215USA
USA
0.50
913-888-2630
913-888-2630
SORINC.COM
SORINC.COM 15.9
SHEATH
14685 W 105TH ST LEN
913-888
SORINC
PRODUCT CERTIFICATION DRAWIN
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
12.7
19.1
0.75
BARE
BARE
(INACTIVE SHEATH ONLY)
INACTIVE
INACTIVESHEATH
SHEATHLENGTH
LENGTH
(PER
(PERMODEL
MODELNUMBER)
NUMBER)
Model Name: 0390656.ASSEM/1/4
0.63
DRAWN
DRAWN
BY BY
THIS DRAWING IS THE EXCLUSIVE PRO
K KMITCHELL
MITCHELL
NO USE WHATSOEVER OF THE INFORMA
BAREDRAWING
WITH
26.7
PRODUCT
PRODUCTCERTIFICATION
CERTIFICATION
DRAWING CHECKED
CHECKED
BY BY
HEREON, NOR REPRODUCTION IN WHOL
STILLING
WELL
1.05
ALL
ALLDIMENSIONS
DIMENSIONS
ARE
ARE
±1/16
±1/16
ININ
MADE WITHOUT THE EXPRESS WRITTEN P
MMSMITH
SMITH
UNLESS
UNLESSOTHERWISE
OTHERWISESPECIFIED
SPECIFIED
ENGINEER
ENGINEER
APPROVAL
APPROVAL TITLE
SHEATH
WITH
26.7
MM
MM
LINEAR
LINEAR
==
BOAL
DIMENSION DRAWING RF PROBE
STEALING
WELL S SBOAL
1.05
ININ
DATE
DATE
MODEL 66X (J HOUSING CONFIGURAT
7.90
0808MAR
MAR2013
2013
DRAWING NUMBE
CABLE
EO NUMBER: 5200
0.31
THIS
THIS
DRAWING
DRAWING
IS IS
THE
THE
EXCLUSIVE
EXCLUSIVE
PROPERTY
PROPERTY
OFOF
SOR.
SOR.
039
NONO
USE
USE
WHATSOEVER
WHATSOEVER
OFOF
THE
THE
INFORMATION
INFORMATION
CONTAINED
CONTAINED
SCALE: 0.50
15.9
HEREON,
HEREON,
NOR
NOR
REPRODUCTION
REPRODUCTION
IN
IN
WHOLE
WHOLE
OROR
PART
PART
MAY
MAY
BEBE
INACTIVE
SHEATH
SHEET
MADE
MADE
WITHOUT
WITHOUT
THE
THE
EXPRESS
EXPRESS
WRITTEN
WRITTEN
PERMISSION
PERMISSION
OFOF
SOR.
SOR.
0.63
DO NOT SCALE PRINT
TITLE
TITLE
DIMENSION
DIMENSIONDRAWING
DRAWINGRFRFPROBE
PROBE
MODEL
MODEL66X
66X(J (JHOUSING
HOUSINGCONFIGURATION)
CONFIGURATION)
EOEONUMBER:
NUMBER:5200
5200
DRAWING
DRAWING
NUMBER
NUMBER
REVREV
0390656
0390656
SCALE:
SCALE:0.50
0.50
22
DWG
DWG
SIZE
SIZE
SHEET
SHEET 1 1 OFOF SALES
2 2 PAGE
BB
DODO
NOT
NOT
SCALE
SCALE
PRINT
PRINT
PURCHASE ORDER #
2
Reset
ResetForm
Form
D
36.5
1.44
3/4-16 UNF-2B X
DUAL RIGID PROBE DETAIL
31.8
1.25
50.8
2.00
11.1
0.44
22.2
0.88
28.4
1.12
DETAIL A
SCALE 1.5
MINIMUM CLEARANCE HOLE
FOR INSTALLATION
54.9
2.16
SEE DETAIL A
ISO-9001
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
DRAWN BY
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
08 MAR 2013
31.8
1.25
54.0
2.13
DUAL CABLE PROBE DETAIL
27.0
1.06
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
Model Name: 0390656.ASSEM/1/4
Linear = mm
in.
DIMENSION DRAWING RF PROBE
MODEL 66X (J HOUSING CONFIGURATION)
EO NUMBER: 5200
SCALE: 0.50
DRAWING NUMBER
0390656
SHEET 2 OF 2
Drawing 0390656
DO NOT SCALE PRINT
Form 1100 (12.15) ©SOR Inc.
N/A
1. DIMENSION APPROXIMATE AND BASED
ON A FIVE THREAD ENGAGEMENT.
ELECTRICAL CONNECTION
1 NPTF STANDARD
3/4 NPTF OPTIONAL
NOTES:
NOTES:
AALENGTH
LENGTH
(PER
(PERMODEL
MODELNUMBER)
NUMBER)
CABLE
PROBE
299.3
11.78
311.2
12.25
370.1
14.57
NOTES:
C
1
11
ALL OTHER
PROBES
78.6
3.10
81.8
3.22
183.9
7.24
104.5
4.11
REV
2
DWG SIZE
B
Reset Form
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
19/28
RF Capacitance
Level Controls
Dimensions
Housing: R for Model 66X
Drawing 0390657
1
SALES PAGE
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
118.6
4.67
96.0
3.78
3/4 NPTF
ELECTRICAL CONNECTION
C
1
PROCESS
CONNECTION
SEE TABLE
1 NPTF STANDARD
3/4 NPTF OPTIONAL
ELECTRICAL CONNECTION
B
1
Linear = mm
in.
INACTIVE SHEATH LENGTH
PER MODEL NUMBER
19.1
0.75
INACTIVE SHEATH ONLY
A LENGTH
PER MODEL NUMBER
3/4 NPTF
ELECTRICAL CONNECTION
DIMENSION APPROXIMATE AND BASED
ON A FIVE THREAD ENGAGEMENT
1
D
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
ELECTRONICS HOUSING
SENSOR
ISO-9001
DRAWN BY
SENSOR STYLE
DIM B
PROCESS CONNECTION
3/4 NPT (M)
1, 1-1/2, & 2 NPT (M)
FLANGED
CABLE
PROBE
87.8
3.46
99.7
3.92
158.5
6.24
STILLING WELL
N/A
ALL OTHER
PROBES
94.1
3.71
97.3
3.83
158.5
6.24
120.0
4.72
DIM C
CABLE
PROBE
152.9
6.02
164.8
6.49
223.7
8.81
N/A
BARE
ALL OTHER
PROBES
159.2
6.27
162.4
6.39
223.7
8.81
185.1
7.29
SHEATH
BARE WITH
STILLING WELL
SHEATH WITH
STILLING WELL
CABLE
INACTIVE SHEATH
D
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
12.7
0.50
15.9
0.63
26.7
1.05
26.7
1.05
7.90
0.31
15.9
0.63
K MITCHELL
CHECKED BY
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
08 MAR 2013
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
DIMENSION DRAWING RF PROBE
MODEL 66X (R HOUSING CONFIGURATION)
DRAWING NUMBER
EO NUMBER: 5200
REV
0390657
SCALE: 0.50
3
SHEET 1 OF 2
DO NOT SCALE PRINT
Model Name: 0390653.ASSEM/2/3+
B
Reset Form
2
SALES PAGE
MODEL #
SALES ORDER #
LINE ITEM #
PURCHASE ORDER #
D
36.5
1.44
3/4-16 UNF-2B X
31.8
1.25
50.8
2.00
DUAL RIGID PROBE DETAIL
11.1
0.44
28.4
1.12
22.2
0.88
DETAIL A
SCALE 1.5
MINIMUM CLEARANCE HOLE
FOR INSTALLATION
54.9
2.16
ISO-9001
14685 W 105TH ST LENEXA, KS 66215 USA
913-888-2630
SORINC.COM
DRAWN BY
SEE DETAIL A
PRODUCT CERTIFICATION DRAWING
ALL DIMENSIONS ARE ±1/16 IN
UNLESS OTHERWISE SPECIFIED
MM
LINEAR =
IN
K MITCHELL
CHECKED BY
Linear = mm
in.
M SMITH
ENGINEER APPROVAL
S BOAL
DATE
08 MAR 2013
31.8
1.25
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
27.0
1.06
54.0
2.13
DUAL CABLE PROBE DETAIL
TITLE
DIMENSION DRAWING RF PROBE
MODEL 66X (R HOUSING CONFIGURATION)
EO NUMBER: 5200
SCALE: 0.50
DO NOT SCALE PRINT
Model Name: 0390653.ASSEM/2/3+
DRAWING NUMBER
REV
0390657
3
SHEET 2 OF 2
DWG SIZE
B
Reset Form
Drawing 0390657
20/28
DWG SIZE
Registered Quality System to ISO 9001
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
RF Probes
Selection Guidelines
Selecting the right probe for your application is very important. The objective is to maximize the amount of
capacitance change for every inch (cm) of level change. Following are general guidelines for selecting a probe
for a particular application. Please consult with SOR or your local SOR sales representative for additional
and/or specific information.
®
1. If process media is non-conductive - less than 10µ Siemens/low dielectric (less than 10), select a bare probe. If there is any water in the process, go to number 2.
2. If process media is conductive - greater than 10µ Siemens/high dielectric (greater than 10), select an insulated probe.
3. If process is non-conductive and in a horizontal (bullet) tank, or if the probe must be mounted more than 12 inches from the vessel wall, select a stilling well, dual-rod or dual-cable probe.
4. If vessel is non-metallic, select a stilling well, dual-rod or dual-cable probe.
5. Use rigid probes for measurement lengths of 10 feet or less. Use cable probes for longer ranges.
6. For agency-listed controls, a matching agency listing must be specific on the probe. Available probe agency listings are provided in the following charts and specification pages.
Flexible Probes
Model
Number
Probe
Material
Sensor
Diameter
Spanned
Capacitance
in Water
Process
Temperature
Limits
Shipping Weight
CN
Kynar
Sheath
5/16”
(7.9 mm)
25pF/in.
-50 to 180oF
(-45 to 82oC)
0.5 lbs. (0.2 kg)
+0.2 lb. (0.9 kg)
per foot of probe
Model
Number
Probe
Material
Sensor
Diameter
Spanned
Capacitance
in Water
Process
Temperature
Limits
Shipping Weight
CP
Kynar
Sheath
5/16”
(7.9 mm)
25pF/in.
-50 to 180oF
(-45 to 82oC)
11 lbs. (5.0 kg)
+0.5 lb. (0.2 kg)
per foot of probe
Single Flexible
Probe
(non-adjustable)
Dual Flexible
Probe
(non-adjustable)
Form 1100 (12.15) ©SOR Inc.
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
21/28
RF Capacitance
Level Controls
RF Probes
Rigid Probes - Sheathed
Model
Number
Probe
Material
Sensor
Diameter
Spanned
Capacitance
in Water
Process
Temperature
Limits
Weight
CB
Teflon®
sheath
5/8”
(15.9 mm”)
10 pF/in.
-100 to 400oF
(-73 to 204oC)
1 lbs. (0.5 kg)
+0.7 lb. (0.3 kg)
per foot of probe
Model
Number
Probe
Material
Sensor
Diameter
Spanned
Capacitance
in Water
Process
Temperature
Limits
Weight
CC
Teflon®
sheath inside
316SS
stilling
well
1.05”
(26.7 mm”)
12 pF/in.
-100 to 400oF
(-73 to 204oC)
2 lbs. (0.9 kg)
+1.5 lb. (0.7 kg)
per foot of probe
Single Rigid
Sheath Probe
Rigid Sheath Probe
with Stilling Well
Model
Number
CD
Probe
Material
Teflon®
sheath
and
316SS
ground
probe
Sensor
Diameter
1/2 & 5/8”
(12.7 &
15.9 mm)
Spanned
Capacitance
in Water
10 pF/in.
Process
Temperature
Limits
Process
Pressure
Weight
-100 to 400oF
(-73 to 204oC)
Pressure
per CB
probe or
flange
rating,
whichever
is lower
12 lbs. (5.5 kg)
+1.5 lb. (0.7 kg)
per foot of probe
Rigid Sheath
Dual Probe
22/28
Registered Quality System to ISO 9001
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
RF Probes
Rigid Probes - Sheathed
Model
Number
Probe
Material
Sensor
Diameter
Spanned
Capacitance
in Water
Process
Temperature
Limits
Weight
CJ
Teflon®
sheath
316SS
sheath
5/8 & 3/4”
(15.9 &
19.1 mm)
10 pF/in.
-100 to 400oF
(-73 to 204oC)
1 lb. (0.5 kg)
+0.7 lb. (0.3 kg)
per foot of probe
Single Inactive
Sheath Probe
Rigid Probes - Bare
Model
Number
Probe
Material
Sensor
Diameter
Spanned
Capacitance
in Water
Process
Temperature
Limits
Weight
CA
316SS
1/2”
(12.7 mm)
N/A
-100 to 400oF
(-73 to 204oC)
1 lb. (0.5 kg)
+0.7 lb. (0.3 kg)
per foot of probe
Model
Number
Probe
Material
Sensor
Diameter
Spanned
Capacitance
in Water
Process
Temperature
Limits
Weight
CE
Bare 316SS
probe inside
316SS
stilling well
1.05”
(26.7 mm”)
N/A
-100 to 400oF
(-73 to 204oC)
2 lbs. (0.9 kg)
+1.5 lb. (0.7 kg)
per foot of probe
Single Rigid
Bare Probe
Single Rigid
Bare Probe
with Stilling Well
Form 1100 (12.15) ©SOR Inc.
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
23/28
RF Capacitance
Level Controls
How to Order
Model Number System
CB C-8A-CS-12-TT
Process Connection
3/4” NPT
1” NPT (Required size on CC and CE probes)
1-1/2” NPT
2” NPT
1” 150# ANSI RF Flange
1-1/2” 150# ANSI RF Flange
2” 150# ANSI RF Flange
3” 150# ANSI RF Flange
(3C, 3D, 4C, 4D only on CD & CP probes)
4” 150# ANSI RF Flange
1” 300# ANSI RF Flange
1-1/2” 300# ANSI RF Flange
2” 300# ANSI RF Flange
3” 300# ANSI RF Flange
4” 300# ANSI RF Flange
1” Tri-Clamp Sanitary
1-1/2” Tri-Clamp Sanitary
2” Tri-Clamp Sanitary
Sensor Material
316SS Standard
Polished 316LSS
Sensor Style
Rigid 316SS Single Probe
Rigid Telfon Single Probe
Rigid Teflon Single Probe
with Stilling Well
Rigid Teflon Dual Probe
(316SS Ground)
Rigid 316SS Single Probe
with Stilling Well
Rigid Teflon Single Probe
with 3/4” OD Inactive Sheath
Flexible Kynar Single Probe
Flexible Kynar Dual Probe
8A
1A
9A
2A
1C
9C
2C
3C
4
Agency Approval
00
CS
FM
MB
NM
No Agency Approvals required
CSA (not available on CA, CE)*
FM (not available on CA, CE, CN, CP)*
IECEX (not available on CA, CE, CJ, CN, CP)*
INMETRO (not available on CA, CE, CJ, CN, CP)*
*Electronics and probe must have the same agency to
maintain the listing integrity (i.e. CS or AI electronics with
CS probe, or FM or FI electronics with FM probe).
4C
1D
9D
2D
3D
4D
1T
9T
2T
5
Sensor Length
XXX.X Sensor length in inches. Lengths are 5
places including the decimal and leading
zeros (see Accessories for different units).
Sensor style CJ requires a sensor length
followed by an inactive sheath length.
See page 19 for limits of probe length.
2
C
D
6
FT
MK
1
ML
CA
CB
PP
CC
RR
CD
TT
CE
CJ
CN
CP
CB
24/28
3
C
Registered Quality System to ISO 9001
8A
CS
00012
| 913-888-2630 | SORInc.com
Accessories
& Certificates
Probe length specified in feet (ft.)
Probe length specified in
meters (m)
Probe length specified in
centimeters (cm)
Fiber tag with customer-specified
information
SS tag wired on with customerspecified information
SS tag riveted on with customerspecified information
C2
C8
Individual Certificates
Hydrostatic Pressure Test Typical Material of Wetted Parts
TT
Model Number
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
Agency
Safety Method
Agency Approval
Approval
Model(s)
FM
Explosion Proof
Class I, Groups B, C, D
Class II, Groups E, F, G
Class III, Division 1
CB, CC, CD
and CJ
CSA
Explosion Proof
Class I, Groups C, D
Class II, Groups E, F, G
Class III, Division 1
CB, CC, CD
CJ, CN and CP
IEC
Intrinsically Safe
Ex ia IIB T4
CB, CC and CD
INMETRO
Intrinsically Safe
Ex ia IIB T4
CB, CC and CD
Probe Insertion Lengths
Probe Type
Length (inch)
Length (cm)
Minimum
Maximum
Minimum
Maximum
CA
3.5”
234”
8.89
594.4
CB
1.5”
234”
3.81
594.4
CC
2”
234”
5.08
594.4
CD
2”
120”
5.08
304.8
CE
2”
234”
5.08
594.4
CJ
7”
120”
17.78
304.8
Sheath*
1”
114”
2.54
289.6
CN
2”
1440”
5.08
3658
CP
3”
720”
7.62
1829
*Sheath length must be selected with CJ only.
Flange Weight and Pressure Rating
Process Connection
Add to Shipping Weight
Maximum Pressure Rating
1C
2 lbs. (1.0 kg)
275 psig (19 bar)
9C
4 lbs. (1.8 kg)
275 psig (19 bar)
2C
5 lbs. (2.3 kg)
275 psig (19 bar)
3C
9 lbs. (4 kg)
275 psig (19 bar)
4C
17 lbs. (8 kg)
275 psig (19 bar)
1D
3 lbs. (1.5 kg)
720 psig (50 bar)
9D
6 lbs. (2.7 kg)
720 psig (50 bar)
2D
8 lbs. (3.6 kg)
720 psig (50 bar)
3D
16 lbs. (7.5 kg)
720 psig (50 bar)
4D
27 lbs. (12.5 kg)
720 psig (50 bar)
Form 1100 (12.15) ©SOR Inc.
SORInc.com
| 913-888-2630 | Registered Quality System to ISO 9001
25/28
RF Capacitance
Level Controls
Probe Temperature
vs. Pressure Charts
5/16” OD Kynar Coated Cable RF Probe 1
Temperature vs. Pressure - Designator CN, CP
180
180
160
Temperature (degree F)
140
120
100
80
60
40
20
0
0
-20
-50
-40
-60
0
20
30
40
50
60
Pressure (psig)
70
80
90
100
110
Rigid Sheath & Bare RF Probe 2
Temperature vs. Pressure Designator - CA, CB, CC, CE, CJ
400
400
350
Temperature (degree F)
10
300
235
250
200
150
100
70
50
0
-50
-50
-100
0
200
400
600
800 1000 1200
Pressure (psig)
1400
1600
1800
-100
2000
Notes
1. Standard pressure rating: 100 psi @ 70oF.
2. Standard pressure rating: 2000 psi @ 70oF.
26/28
Registered Quality System to ISO 9001
| 913-888-2630 | SORInc.com
Form 1100 (12.15) ©SOR Inc.
RF Capacitance
Level Controls
Level Instruments Application Data Sheet
Please use the worksheet/data sheet below to provide SOR with specific details of your application.
This will allow us to help you select the proper RF model to ensure optimum performance. You may
wish to make copies of the blank form for future use.
General
Sensor
Control
Switch
Transmitter
General
Application
Conditions
Float/
Displacer
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Tag Number
Application
Function
Area Classification
Agency Approval
Probe Model
Orientation
Style
Process Wetted Materials
Insertion (in/cm)
Process Connection Size
Location
Enclosure Class
Conduit Connection
Electronics Model
Power Supply
No. of Setpoints
Type
Quantity/Form
Rating Type
Rating: Amps
Load Type
Setpoint Location
Output
Measurement Range
Process Media Name
Vessel Shape
Vessel Material
Vessel Lining
Press Max. Normal
Temp. Max. Normal
Ambient Temp. Range
Solids (%)
Specific Gravity
Viscosity (cp)
Turbulence
Process Coating
Vertical/Horizontal
_______________in/cm
Integral/Remote
Ex Pf/I.S./NEMA 4
Contact Name
Phone
Fax
E-mail
Rep Company
Rep Contact
Drawings/Sketches: Please
indicate mounting location as well
as other connections and internal
obstructions.
Relay/8 or 16 mA
____________x SPDT/DPDT
AC/DC
_____________Amps
Inductive/Non-Inductive
Measured from Process
Connection (show on drawing)
4-20 mA
Vert. Cylinder/Horiz.
Cylinder/Sphere
No/Yes Mat’l.__________
__________(cp)
Yes/No
Yes/No
Yes/No
41
42
43
44
45
46
47
Yes/No
Form 1100 (12.15) ©SOR Inc.
Company
Address
Hazardous/Non-Hazardous
40 Vibration Mixing
Upper Fluid Name
Dielectric Constant
Lower Fluid Name
Dielectric Constant
Aeration
Ultrasonic
Suspended Solids (%)
Switches
Hydrocarbon Vapors
Submersible 48 Cable Length
Pressure
49 Nose cone
50 Manufacturer
Notes (list any special options)
RF
Instruments
Level/Interface
Yes/No
SOR
SORInc.com
Fax completed data sheet to
SOR at 913-888-0767.
| 913-888-2630 | Registered Quality System to ISO 9001
27/28
SOR Inc. | Lenexa, KS USA | 913-888-2630 | Fax 913-888-0767 | SORInc.com
REGIONAL OFFICES
China
Middle East
SOR China | Beijing, China
SOR Measurement & Control Equipment Trading DMCC | Dubai, UAE
+86 (10) 5820 8767 | Fax +86 (10) 58 20 8770
Form 1100 (12.15) ©SOR Inc.
SORInc.com
+971 4 278 9632 | Fax +971 4 279 8399
| 913-888-2630 | Registered Quality System to ISO 9001
28/28