DLED-9000-7.8W LED Series
A Recessed Trimless Dimmable LED Linear Fixture for Damp Location
with Screwless 98 CRI (3K) Decorative U-Shaped White Acrylic Diffuser and Integral Dimmable Driver
TYPE
PROJECT
CATALOG NUMBER
Fixture Description:
Multi-lamp recessed trimless dimmable linear LED fixture with integral flush-with-drywall
self-finishing housing and screwless decorative white acrylic diffuser Suitable for wall or
ceiling mount applications.
Features:
1. Diffuser: High Transmission .
B - Semi-Gloss Standard
SB - Satin Finish
U-shaped white acrylic. Diffuser attachment friction fit or clips.
2. Lamping: 35,000 hour 3.9W x 2 (7.8W per foot) LED light source.
3. Electrical: HDA - 120V - 277V. LTE - 120V only. 120V Lutron constant voltage Highlume A
dimmable driver. Lutron driver single dimmable to 1%, 3 wire dimming.
Lutron HDA Driver - 3-wire dimming with Lutron dimmers.
Lutron LTE Driver - 2-wire dimming with Lutron dimmers.
LTF Driver - 2-wire dimming with reverse phase with neutral or ELV dimming.
LTF Driver - 0-10 volt
4. Adjustable L-Bracket: Allows for 3/8” - 1” variable recessed depth alignment.
5. Housing: Fixture wall is .0625 extruded aluminum.
7. White powder coated wiring cover.
8. Fixture has one 1/2” knockout on end where ballast is located.
Housing Dimensions: 3.50”W x 3”D
Length: See Chart
Patent: Design Patent No. 473,670S
US Patent No. US 6,616.309 B2
Voltage: 120V or 277V.
L Brackets: Add suffix “M-1” or
“MOD” = modified bracket (consult factory)
Label: ETL for damp location.
2 X 4 METAL
OR WOOD STUD
2 X 4 METAL
OR WOOD STUD
4.50”
Rough Opening
4”
DIMMABLE
DRIVER
3.00”
M-1 BRACKET
WIDTH: 2”
NOTE: ADJUSTS FOR
3/8” TO 1” WALL / CEILING
THICKNESS
3.9W
3.9W
NOTE: ADJUSTS FOR
3/8” TO 1” WALL / CEILING
THICKNESS
3.9W x 2 or
7.8W PER
FOOT TOTAL
5/8” DRYWALL
5/8” DRYWALL
3.437”
3.5”
ADJUSTABLE BRACKETS
2“ DRYWALL MESH TAPE
6“ WIDE WESTPAC HI DENSITY
FAST SET #HDFS 20
3.75”
Dry Wall
Rough Opening
HOUSING
EDGE
DRYWALL
LENS
MESH TAPE
QUICK SET COMPOUND
HOUSING EDGE MUST EXTEND
1/8” PAST DRYWALL TO CREATE TAPER
LENS
TOP
SIDE
2.00”
1.00”
O.C.
3.00”
M-1 BRACKET
2.50”
1/4”
LED Wattage
per Foot
Lumens
per Foot
Color
Temp.
CRI
7.8W
712
3K-90
97
7.8W
700
27K-90
90+
7.8W
712
35K-90
90+
OPTIMAL DIMENSIONS
Fixure Wattage
per Foot
Lumens
per Foot
Color
Temp.
CRI
9.4W
390
3K-90
97
9.4W
382
27K-90
90+
9.4W
390
35K-90
90+
Divide by 3, and add 1”
3.437”
3.5”
3.0”
NOTE: DOUBLE CHANNEL
LED SHOWN - SINGLE
CHANNEL ALSO AVAILABLE.
CONSULT FACTORY
Prefix
DLED
Series
9000
Length Length*
(Maximum Overall Length)
Lens Type
HTW-B
Lens
Mounting
FL
Temperature
3K-90
LED Watts
per Foot
7.8
Mounting
WM
Dimming
HDA
Voltage
120
DLED
9000
____________ “ M.O.L.
High
Transmission
Semi-Gloss
White
HTW-B
High
Transmission
Satin White
HTW-SB
Flush
FL
3K-90
7.8
Wall Mount
WM
Ceiling
Mount
CM
HDA
Lutron 3-Wire
LTE
Lutron 2-Wire
(120V only)
LTF
2-Wire
(120V only)
LTF 0-10
0-10V
(120V, 277V only)
Voltage
120
240
277
TO SPECIFY AN OPTIMAL
DIMENSION, USE A NUMBER
DIVISIBLE BY 3 AND ADD 1” .
NOTE: ANY DIMENSION
MAY BE FABRICATED, BUT
LIGHT UNIFORMITY MAY BE
IMPACTED
27K-90
35K-90
Ordering Example: DLED-9000-49-HTW-B-FL-3K-90-7.8-WM-M-1-HDA-120
©2015 Dreamscape Lighting
Specifications are subject to change
without notice.
5521 West Washington Blvd.
Los Angeles, CA 90016
Telephone: (323) 933-5760
FAX: (323) 933-3607
NOTE: This fixture is NON-IC. If fixture is installed in an insulated space, installation must be
held back 3” from contact with fixture. Please check your local electrical and building codes.
www.dreamscapelighting.com
info@dreamscapelighting.com
DLED-9000-7.8_102815