Heavy Duty Safety Switch with
Pyle-National Interlocked Receptacle
Type VBII, 30 Amp, Type 12 Industrial and
Type 4X Stainless Steel
Standards and Ratings
• UL Listed under file #E4776
• Meets UL98 for switches and UL50
for enclosures
• Meets NEMA Standard KS-1for
enclosed switches
• Meets NEC wire bending space
requirements
• Rated 10,000 AIC with Class H fuses
or 200,000 AIC with Class R and
J fuses
• I2t rated (Amps2 x Seconds =
50,000)
• 12X overload current rating exceeds
standard 10X industry standard
• Double break visible blade design
• Highly visible ON/OFF indication
• Rugged installer friendly enclosure
design
• Modular design allows quick and
easy replacement of parts
• Front removable lugs which can
easily be converted to copper body
or compression type lugs
• Defeatable dual cover interlock
• Insertion or removal of the plug is
prevented by the interlock linkage
while the switch is ON
• Receptacle prevents operation of
the switch if an incorrect plug is
inserted
• Accepts Pyle-National plug #
JPD-83046
Features
• Quick-make and break switching
action
General Information
Catalog
Number
Volts 1
Type 12 Industrial 2
HF361JPN
600
HNF361JPN
600
Type 12 Stainless Steel
HF361SPN
600
HNF361SPN
600
Horsepower Ratings
Description
Shipping
Weight (lbs.)
3 Pole, 3 Wire, Fusible
3 Pole, 3 Wire, Non-Fusible
23
21
3 Pole, 3 Wire, Fusible
3 Pole, 3 Wire, Non-Fusible
23
21
34
Catalog
Number
3 Phase, 240V AC
Std
Max
3 Phase, 480V AC
Std
Max
3 Phase, 600V AC
Std
Max
HF361JPN
HF361SPN
HNF361JPN
HNF361SPN
35
35
—
—
55
55
—
—
7¹⁄₂ 5
7¹⁄₂ 5
—
—
Accessories
Catalog Number
HA161234
HA261234
HA361234
HG61234
HP61
HR612
HLC612
SSH075
7¹⁄₂ 5
7¹⁄₂ 5
10
10
15 5
15 5
20
20
Description
One Normally Open and Closed Auxiliary Switches
Two Normally Open and Closed Auxiliary Switches
Low Voltage Auxiliary Switch
Equipment Ground Lug Kit (Factory installed) 6
Fuse Puller (3 per kit)
600 Volt Class R Fuse Clip Kit (3 lugs per kit)
Copper Lug Kit (9 lugs per kit)
.75” Type 12 and 4/4X Hub
1 Also rated 250V DC.
2 Also rated 3R/3S for outdoor use.
3 Dual horsepower ratings: Std - applies when
non-time delay fuses are installed.
Max - applies when time-delay fuses are
installed.
4 Also rated 5HP at 250V DC.
5 Horsepower ratings listed also apply to high
efficiency motors with no derating.
6 Load side of ground kit is wired to the 3 phase,
4 wire grounded type receptacle.
Product Specification Sheet HD30.20
Answers for industry.
20 5
20 5
30
30
Product Specification Sheet #HD30.20
(page 2 of 2)
Replacement Parts
Mechanical Lug Wire Ranges (60/75ºC, Cu/Al)
Catalog Number
Description
Description
Wire Range
HFB612
HBB612
HNB612
HH6123
Fusible Line Side Replacement Base
Fusible Load Side Replacement Base
Non-Fusible Line Side Replacement Base
Replacement Handle/Handle Guard (HH6123S
for Stainless)
Replacement Lugs (3 lugs per kit)
Replacement Mechanism (HM6123S for Stainless)
Replacement Door
Line, Load
Neutral
#14-6 AWG (Cu/Al)
Ground 2
#14-4 AWG
HL612
HM6123
1
1 Place “Door” at the end of the switch catalog number.
2 Load side of ground kit is wired to the 3 phase, 4 wire grounded type receptacle.
Compression Lugs
Burndy
CU Only
Wire
Size
Thomas-Betts
CU Only
CU/AL
60096
60097
60101
60102
61102
61107
#14-10
YA8C-L BOX
YA8C-L1 BOX
#8
Ilsco
CU Only
CU/AL
54104
54130
#6
CRA-8
CU/AL
ACL-8
ACN-8
Dimension Drawing
7.4
[188]
10.46
[256]
3.24
[82]
8.4
[215]
.3
[3]
SEE DETAIL A
.42
[11]
OF BOX
17.31
[440]
16.46
[418]
15.45
[393]
27 DIA (4)
[7]
14.27
[362]
4.07
[103]
2.60
[66]
1.9
[50]
2.73
[70]
2.73
[70]
5.32
[135]
3.39
[86]
8.5
[218]
9.0
[229]
.35
[9]
6.22
[158]
.27 DIA
[7]
.95
[24]
.6 DIA
[16]
DETAIL A
6.65
[169]
No knockouts in the enclosure.
Dimensions shown in inches and millimeters ( ).
Dimension shown accurate to + ¹⁄₈ inch.
Siemens Industry, Inc.
Building Technologies Division
5400 Triangle Parkway
Norcross, GA 30092
1-800-964-4114
LINE SIDE
WIRE BEND
600V
3.02 (77)
Type 12 Enclosure: Galvanized Steel
.054 Thick (17 Gauge)
Finish: ANSI Grey #61 Paint
Type 12 Stainless Enclosure: 304 Stainless Steel
.055 Thick (17 Gauge)
Subject to change without prior notice
All rights reserved
Printed in USA
© 2009 Siemens Industry, Inc.
30A Pyle-National Receptacle
JRC-430-INT-12
Siemens is a registered trademark of Siemens AG. Product names
mentioned may be trademarks or registered trademarks of their
respective copanies. Specifications subject to change without notice.
www.usa.siemens.com/switches