The VALENTINI range of cables
is developed for
the particular application and rigorous environments of the audio
& video installation, studio recording, musical entertainment and
every where the electrical and mechanical properties are required.
AUDIO MULTIPAIR mod. 7YPR..
SYNTAX CABLE
CABLES
The SYNTAX® AUDIO MULTIPAIR are developed for the particular application and rigorous environments of the audio & video
installations, studio recording, musical entertainment and every where the electrical and mechanical properties are required.
It is formed with precise talc lined ridges that cradel the cores in formation yet allow them to slide against one other. This solve the
problems of twisting and knots when the cable is employed, without losing the right flexibility.
The XLPE conductors insulation is particulary resistant to high temperatures, to avoid warping or shrinkage when soldering. The pairs are
twisted and the external PVC jacket are individually numbered. An aluminium/polyester foil shield provide a 100% screen and the wire
drain inside allows fast installation. All the conductors are made by high purity Oxigen Free Copper.
The external very flexible PVC jacket is made by high tech polymer to get benefits like impact absorbing, slipping over rouge surfaces
and suppleness down to minus 30°C.
TYPE
PART N.
Ø CABLE
- Conductors jacket:
red/blue XLPE
2 pairs
7YPR02SX
7,2 mm
- External jacket:
flame-retardant flex PVC black
4
pairs
7YPR04SX
9,6 mm
- Conductors:
tinned OFC 24 AWG 19 x 0,12 mm
8 pairs
7YPR08SX
12,2 mm
- Drain wire:
tinned OFC 24 AWG 19 x 0,12 mm
12 pairs
7YPR12SX
14,5 mm
- Screen:
aluminium/polyester foil 100% coverage
16 pairs
7YPR16SX
16,3 mm
- Operating temperature:
-30° +70° C.
- D.C.R.: conductors <90 ohm/km
24 pairs
7YPR24SX
20,8 mm
shield
<70 ohm/km
32 pairs
7YPR32SX
22,8 mm
- Capacitance: CDR/CDR 1Khz - 100 nF/km
40 pairs
7YPR40SX
25,2 mm
CDR/SCR
1Khz - 200 nF/km
48 pairs
7YPR48SX
27,0 mm
INSTALLATION AUDIO mod. 7XCBL02SX
The smaller external diameter of this cable, made from two tinned OFC conductors, is the best for the inside wiring of racks and audio
equipment installations. The XLPE conductors insulation is particulary resistant to high temperatures, to avoid warping or shrinkage
when soldering. The pair is twisted interference proof, the aluminium/polyester foil shield provide a 100% protection from external noises
and the tinned wire drain allows a fast installation.
- External jacket:
- Operating temperature:
- Conductors jacket:
- D.C.R.:
flame-retardant PVC black - Ø 2,7mm - Conductors:
-30° +70° C.
- Drain wire:
red/blue XLPE
- Capacitance
conductors
<90 ohm/km
shield
<70 ohm/km
- Screen:
tinned OFC 24 AWG 19 x 0,12 mm
tinned OFC 24 AWG 19 x 0,12 mm
CDR/CDR 1Khz
100 nF/km
CDR/SCR 1Khz 200 nF/km
aluminium/polyester foil 100% coverage
AUDIO MICROPHONE mod. 7XSPM03N
SYNTAX AUDIO MICROPHONE. The featuring of this cable provide an excellent fexibility and anti-knotting. The two insulated twisted
conductors and drain wire are shielded with a high density copper wrap for highly screening performance. A note for the conductors
made with tinned OFC and insulated with a high thermal resistance XLPE sheath to avoid warping or shrinkage when soldering.
A special precautions is the flame retardant outer jackets, very thick which improves the flexibility, subflooring, abrasion resistant, water
repellent and anti-knotting. The jackets are flame retardant PVC compound and allow the use of the cable up to temperatures of -30°C.
- Nominal resistance:
<96 ohm/km
- Conductors:
tinned OFC 24 AWG 19 x 0,12 mm - Screen:
high density spiral OFC 95% cov.
- Drain wire:
tinned OFC 24 AWG 19 x 0,12 mm
Conductors jacket:
Mutual capacitance:
Operating temperature:
External jacket:
email: info@syntaxnet.it - web: www.syntaxnet.it - Tel. +39 0119594160 - Fax +39 0119594166
red/blue XLPE
1Khz 160 nF/km
-30° +70° C.
black PVC Ø 6,5mm flame-retardant
(Red – Green – Blue on demand)
40
SYNTAX CABLE
CABLES
AUDIO MICROPHONE mod. 7XSP03N
This version of microphone cable has a double jacket, which allows the use where connectors have a small cable gland. The type of PVC
used is very flexible, subflooring, abrasion resistant, water repellent and anti-knotting. The inner pair consists of two twisted conductors
of electrolytic tinned copper, insulated with a high thermal resistance XLPE sheath to avoid warping or shrinkage when soldering. The
shield consists of a electrolytic copper spiral wrap and the connection of the ground contact is facilitated by a tinned copper wire (drain
wire) in contact of the spiral, also improving the mechanical strength. The jackets are flame retardant PVC compound and allow the use
of the cable up to temperatures of -30°C.
- Nominal resistance:
<96 ohm/km
- Conductors:
tinned OFC 24 AWG 19 x 0,12 mm - Screen:
high density spiral OFC 95% cov.
- Drain wire:
tinned OFC 24 AWG 19 x 0,12 mm
Conductors jacket:
Mutual capacitance:
Operating temperature:
External jacket:
red/blue XLPE
1Khz 160 nF/km
-30° +70° C.
black PVC Ø 6,5mm flame-retardant
(Red – Green – Blue on demand)
INSTRUMENT CABLE mod. 7XHP01SX
This professional high end unbalanced cable offers a very low capacitance with loss free transmission, ideal for bass, guitar, and
keyboard due to the special stranding and a wire diameter of 0.50 mm². The sound advantages of this design are extremely fast
transmission capabilities (ideal for attacks), convincing mid ranges, popping deep basses and an analytical transmission.
Brightly and dominant high frequency transmission at long paths on large stages even when are used pickups with lots of coils.
This cable can handle the low frequencies of analog machines as easily as the razor-sharp high ranges of virtual synthesizers.
It is protected against cable breaks and convinces with high bending cycles. A triple shielding by the combination of double tinned copper
spiral shielding and conductive carbon shielding. Due to the thick sturdy jacket it is very robust and strain relief, protected against cable
breaks and convinces with high bending cycles. Despite the robustness it is very easy to wind, because is made with a special PVC
pigment and a fine stranding of the internal conductor.
CONSTRUCTION DETAIL
- Conductor: 1 x 0.50 mm² tinned copper OFC, 21 AWG 64 x 0,10 mm
- Insulation:
Foam skin PE, Diameter =2.40 mm - white color
- Color: Clear
- Shields:
conductive carbon jacket + double tinned copper wrap
- External jacket: Flexible PVC flame-retardant Black colour, Ø 7.00 mm
- Operating temperature: -30°C to 70°C
41
ELECTRICAL DETAIL at 20°C
- Conductor resistance:
≤ 39.5 ohm/Km
- Insulation resistance:
≥ 1 Gohm/Km
- Capacitance: 89 pF/m nominal
- Operating rating:
< 50 V
- Voltage test:
1.5 kVdc x 1 min.
2010 UPDATE n° 10 ENTERTAINMENT DIVISION - SYNTAX - Via Asti 84/A - 10098 Rivoli (Turin) - ITALY
CABLES
SYNTAX CABLE
DIGITAL MULTIPAIR mod. 7YD....SX
The SYNTAX DIGITAL MULTIPAIR cables are developed for application in fixed plant and outdoors, where the management of digital
equipment are very important part of the whole system.
The cables have been designed in accordance with the standard AES/EBU specification, 110 ohm impedance and a very low
capacitance due to the use of a special gas injected foam as insulation of the conductors. The particular internal formation, solves
the problems of twisting and knots when the cable is employed, without losing the right flexibility. The pairs are twisted and individually
shielded by aluminium foil with drain wire. The external jacket of each pair is individually numbered.
The overall external jacket is made with a high tech PVC polymer, very flexible and impact absorbing, slipping over rough surfaces and
suppleness down to minus 30°C.
- Conductors: tinned OFC 24 AWG - 28 x 0,10 mm
- D.C.R.:
conductors <86 ohm/km
- Conductors jacket:
white/blue gas injected foam - Ø 1,4 mm shield <70 ohm/km
- Drain wire: tinned OFC 24 AWG - 7 x 0,18 mm - Capacitance: cond./cond. 1Khz 37 nF/km
- Screen: aluminium/mylar foil 100% coverage
cond./shield 1Khz 57 nF/km
- Nominal Impedence:
1-4 Mhz 110 ohm/100 mt
4 pair: 7YDPR04SX Ø 11.2 mm
- External jacket: matt Black super flexible PVC flame-retardant 8 pair: 7YDPR08SX Ø 14.8 mm
- Operating temperature: -30° +70° C
12 pair: 7YDPR12SX Ø 17.4 mm
16 pair: 7YDPR16SX Ø 19.5 mm
DIGITAL AES/EBU-DMX mod. 7XDDS03SX
A single pair DIGITAL AES/EBU-DMX CABLE, in according with the standard AES/EBU and DMX use specifications, is manufactured
with reliably consistent impedance and use a special polymer sheath to achieve low capacitance. To ensure a high level protection
from EMI/RFI noise, the shield is made with two different screens: the first by high-density spiral tinned copper, the second
by aluminium/polyester foil. Blue PVC flame-retardant external jacket, trampling-proof, impact absorbing and long flex life.
- Conductors:
tinned OFC 24 AWG 19x0,12 mm
- D.C.R.:
- Conductors jacket:red/blue Foam - Skin Ø 1,4 mm
- Drain wire:
tinned OFC 24 AWG 19x0,12 mm
- Capacitance:
- Screen 1:
high density spiral tinned OFC 95% cov
- Screen 2:
aluminium/polyester foil 100% cov.
- Nominal Impedence:
- External jacket: Blue PVC Ø 5,5 mm flame-retardant
- Operating temperature:
conductors <90 ohm/km
shield
<40 ohm/km
cond./cond. 1Khz 40 nF/km
cond./shield 1Khz 80 nF/km
1-4 Mhz 110 ohm/100 mt
-30° +70° C.
Furter model is the halogen free 7XDDHF03SX for installation use with external green jacket LSZH
TWO PAIRS DIGITAL mod. 7XDDS07SX
The SYNTAX® two twisted pairs digital cable, is manufacture with reliably consistent impedance and use a special polymer sheath
to achieve low capacitance. The shield is made with two different screens: the first by high-density spiral tinned copper, the second by
aluminium/polyester foil. For easy connection the drain wire is present between the two screens. The second pair may be used for the
feedback signal on digital data lines. The external jacket is black PVC flame-retardant, trampling-proof, impact absorbing, water-proof
and long flex life.
- Conductors:
tinned OFC 24 AWG 19 x 0,12 mm
- Conductors jacket: 1 - red/blue Foam - Skin Ø 1,4 mm
2 - red/black Foam - Skin Ø 1,4 mm
- Drain wire:
tinned OFC 24 AWG 19 x 0,12 mm
- Screen 1:
high density spiral tinned OFC 95% coverage
- Screen 2:
aluminium / polyester foil 100% coverage
- External jacket:
black PVC Ø 7,2 mm flame-retardant
- D.C.R.:
- Nom. impedence:
- Capacitance:
- Operating temperature: email: info@syntaxnet.it - web: www.syntaxnet.it - Tel. +39 0119594160 - Fax +39 0119594166
conductors
<90 ohm/km
shield
<25 ohm/km
1-4 Mhz 110 ohm
cond./cond. 1Khz 40 nF/km
cond./shield 1Khz 80 nF/km
-30° +70° C.
42
CABLES
SYNTAX CABLE
ETHERNET CABLES mod. 7XLANCAT5 - 7XLANCAT5PUR
7XLANCAT5
7XLANCAT5PUR
SYNTAX® offers a cable with high intrinsic quality, with excellent flexibility and robustness to tackle the difficult jobs in the entertainment
world, ensuring reliable performance in critical conditions.
With the great spread of the Internet, this kind of cables, widely used in the computer world, are produced on a large scale to drive down
prices, often at the expense of transmission quality and manageability.
The Syntax CAT5e cable is designed for use in broadcasting and in all the network installations for transmission of high Class D bit-rates;
it is compliant with ISO/IEC 11801 - EN 50173 - EIA/TIA 568B.2, ensuring the accurate transmission of data up to 90 meters cable length.
To maintain the correct data transfer along the entire length, it is very important that the body cable is not deformed by altering the internal
position of the four twisted pairs. In this regard the use of a particular foamy compound keeps the twisted pairs fixed and properly spaced.
Moreover, the presence of two shields (one in aluminium foil and the other in tinned copper braid) guarantees 100% protection from external noise.
The version PUR up-jacketed has been particularly designed for heavy outdoor application, for use on cable drum, for mobile transmission
vehicles and wherever a high abrasion resistance and continuous bending cycles is needed, preserving an enduring transmission quality.
When using this version, the second jacket should be removed near the RJ45 connector, to get the right diameter for assembling.
GENERAL CHARACTERISTICS
- Inner conductor:
- Insulation: - Color code: - First screen: - Second screen:
- 7XLANCAT5 Jacket: - 7XLANCAT5PUR First jacket: - 7XLANCAT5PUR Second jacket: FREQUENCY
43
- Resistance of conductors:
- Insulation resistance:
- Capacity between conductors:
- Impedance from 1 to 100MHz:
- Temperature range:
Solid bare copper wire - Ø=0,51 mm
Polyolefin Foam - Ø=0,95 mm
green, white-green, orange, white-orange,
blue, white-blue, brown, white-brown
aluminium-maylar overlapping foil 100%
tinned copper braid coverage >80%
< 90 Ω/Km
> 10.000 Ω x Km
51 pF/m
100 Ω
-30° C / +80° C
PVC compound black - Ø=6,4 mm
PVC compound black flame retardant - Ø=6,4 mm
Polyurethane compound black - Ø=7,7 mm
1 MHz
4 MHz
10 MHz
16 MHz
20 MHz
32.25 MHz
62.50 MHz
100 MHz
Attenuation (dB/100 m)
2.0
3.8
6.1
7.5
8.6
10.7
15.6
19.9
Next (dB) min
66.3
57.3
51.3
48.2
46.8
43.9
39.4
36.4
2010 UPDATE n° 10 ENTERTAINMENT DIVISION - SYNTAX - Via Asti 84/A - 10098 Rivoli (Turin) - ITALY
VIDEO INSTALLATION CABLE mod. 7XVD59D
SYNTAX® standard coax cable 75 ohm nominal impedance, designed for video signals. By the two shields composition, red copper
braid and tinned copper braid, has been developed for outdoor installation to keep low attenuation values over extended distances.
-
Inner conductor: solid OFC red copper 1 x 0,60 mm
Shield 1:
OFC red copper braid (85% cov.)
Shield 2:
OFC tinned copper braid (85% cov.)
Dielectric diameter:Ø 3.5 mm polyethylene
External Jacket: Grey standard (others colours on demand)
50 MHz
7
-
Overall diameter: Ø 6,10 mm
Capacitance (800 ÷ 1200 Hz) 67 pF/mt ± 5%
Nominal impedance: 75 Ω ± 3
Velocity of propagation: 66%
NOMINAL ATTENUATION (dB/100 m)
100 MHz
200 MHz
400 MHz
12
16
25
SYNTAX CABLE
CABLES
1000 MHz
43
HDTV VIDEO INSTALLATION CABLE mod. 7XVD59HDTV
This SYNTAX® halogen free video coax cable 75 ohm, is designed for HDTV high performance applications.
The jacket around the inner conductor is made with a special foam plastic polymer to guarantee a very low value of capacitance also for
great length connections. The first shield, made with OFC red braid copper, together the second screen, made with tinned braid copper,
warrants a great protection from external noises. A further shield aluminum foil made is placed between the other two and forms a fire-proof
barrier. All the used materials to produce the cable, have been chosen to satisfy the main safety regulations in order to make the cable
compliant to the following standards:
IEC 332-3C fire resistant coaxial cable; IEC 754-1 amount halogen acid gasses; IEC 754-2 acidity of gasses;
IEC 1034/1 & 2 smoke density; NF x 70/100 gas toxicity.
NOMINAL ATTENUATION (dB/100 m)
- Inner conductor solid OFC red copper 1 x 0,81 mm
1.0 MHz
0.75
- Shield 1 OFC red copper braid (85% cov.)
3.6
MHz
1.50
- Shield 2 OFC tinned copper braid (85% cov.)
10.0 MHz
2.40
- Shield 3 fire-proof aluminium foil
- Dielectric diameter Ø 3,70 mm foam-polyolefin
71.5 MHz
6.50
- External jacket Polymer LSZH yellow – UV proof
135.0 MHz
9.10
- Overall diameter Ø 6.20 mm
270.0 MHz
13.10
- Weight 60 g/m
360.0 MHz
15.30
- Capacitance (800 ÷ 1200 Hz)
60 nF/km
540.0 MHz
19.20
- Resistance of insulation (20°C, 500V ) > 10 GΩ/kM
720.0 MHz
22.70
- Electrical resistance (20°C)
Inner conductor < 36 Ω/kM
750.0 MHz
23.20
Screen
< 8 Ω/kM
- Nominal impedance 75 Ω ± 3
1000.0 MHz
27.50
- Test voltage
7000 Vcc x 1 min
1500.0 MHz
35.40
- Velocity of propagation 79%
2000.0 MHz
41.60
- Transfer function
(1-30 MHz) : 10 mΩ/m
3000.0 MHz
52.80
- Operating temperature range -15° +70° C
SPEAKERS POWER LINE CABLES mod. 7Z..
This range of SYNTAX® SPEAKER cables has been developed for maximum flexibility and mechanical properties.
The main characteristic is the use of very small section wires to get the full section, which increase conductivity and brillance of sound.
They feature large conductor size, to minimize resistance to conduction of high power. The mould of the jacket hugs the cores in position
whilst the wall thickness and elasticity gives protection from knocks and scrapes. The external diameters match perfectly with the main
power connectors. Finally the artic polymer PVC jacket keeps the cables easy to flex and rig in a wide range of temperatures.
- D.C.R. 20° C.: - External jacket: - Operating voltage: - Operating temperature:
- Conductors OFC strand:
sect. 1.5 mm² = 13 ohm/km
sect. 2.5 mm² = 8 ohm/km
sect. 4.0 mm =
5 ohm/km
flame-retardant flex PVC Black
<50 Vca
-30° +70° C.
sect. 1.5 mm² = 84 x 0.15 - 16 AWG
sect. 2.5 mm² = 147 x 0.15 - 13 AWG
sect. 4.0 mm² = 224 x 0.15 - 11 AWG
PART N.
CABLE
7Z2SX15 = 2 x 1.5 mm²
7Z2SX25 = 2 x 2.5 mm²
7Z2SX40 = 2 x 4.0 mm²
7Z4SX25 = 4 x 2.5 mm²
7Z4SX40 = 4 x 4.0 mm²
7Z6SX25 = 6 x 2.5 mm²
7Z8SX25 = 8 x 2.5 mm²
7Z8SX40 = 8 x 4.0 mm²
7Z16SX40 = 16 x 4.0 mm²
email: info@syntaxnet.it - web: www.syntaxnet.it - Tel. +39 0119594160 - Fax +39 0119594166
Ø 7.4 mm
Ø 8.8 mm
Ø 11.4 mm
Ø 10.5 mm
Ø 13.5 mm
Ø 13.5 mm
Ø 14.0 mm
Ø 20.0 mm
Ø 22.0 mm
44
CABLES
SYNTAX CABLE
MULTICORE POWER CABLE mod. 7ZF..
These SYNTAX® MULTICORE POWER cables are manufactured with a flexible and impact absorbing external jacket, comply with CEE
20-22/III - IEC 60332-3-24 - EN 50266-2-4 fire resistant regulations.
Excellent flexibility, mechanical resistance and ease handling.
Designed for lighting applications, match perfectly with power connectors 19 pin SSX series.
Part.N
7ZF1915
7ZF1925
7ZF1225
CABLE
19 poles x 1.5 mm² - 18 numbered jackets + Green/Yellow
19 poles x 2.5 mm² - 18 numbered jackets + Green/Yellow
12 poles x 2.5 mm² - 11 numbered jackets + Green/Yellow
Ø 18,0 mm
Ø 22,3 mm
Ø 18,0 mm
7ZF1925PUR
This version of 19 x 2,5 Power Multicore, is for use when halogen-free cable is requested. The particular distribution of the inner cables
and Polyuretan jacket (PUR), provides high shear strength and extremly long life, despite the smaller thickness of the cable sheat.
The several advantages are: slim cable handling, less total weight and norm compliant halogen-free , due to PUR native features.
External overall diameter 18mm, weight 0,62 kg/mt, good flexibility.
7ZF1925HP
Another version of the 19 x 2,5 Power Multicore, is designed to use where the handling operations are very intensive.
The particular distribution of the inner cables and the material used for the external jacket, allow a lot of cycles of rolling and unrolling,
without any problem for the cable life. The PVC black jacket comply with CEE 20-22/III - IEC 60332-3-24 - EN 50266-2-4 fire resistant
regulations. The six channels are easy recognizable by color and number assignation.
MAINFLEX POWER CABLE mod. 7ZF0325
The main application of the SYNTAX® MAINFLEX cable is for lighting technology and other current-carrying circuits. The strand
construction was designed to get the best flexibility for a wide range of external temperature. This cable has a good impact absorbing
and the external jacket is compliant with CEE 20-22/III - IEC 60332-3-24 - EN 50266-2-4 regulations. The 11.3 mm overall diameter match
perfectly the six ways rubber insert of the SYNTAX SSX 19 pin Spider connector, for break-ins and break-outs leads.
- Construction
- Jacket
- Temperature range
Some other versions
- 7ZF0340 3x4 mm² - 7ZF0360 3x6 mm² - 7ZF0525 5x2.5 mm² - 7ZF0540 5x4 mm² - 7ZF0560 5x6 mm² 45
3x2.5 mm² Brown-Blue-Green/Yellow inner conductors
Black matt PVC Ø 11.3 mm comply with CEE 20-22/III - IEC 60332-3-24 - EN 50266-2-4
min. -30 °C max. 70 °C
Brown-Blue-Green/Yellow inner conductors - Ø 13.0 mm
Brown-Blue-Green/Yellow inner conductors - Ø 14.0 mm
Brown-Blue-Black-Grey-Green/Yellow - Ø 12.5 mm
Brown-Blue-Black-Grey-Green/Yellow - Ø 15.0 mm
Brown-Blue-Black-Grey-Green/Yellow - Ø 16.0 mm
2010 UPDATE n° 10 ENTERTAINMENT DIVISION - SYNTAX - Via Asti 84/A - 10098 Rivoli (Turin) - ITALY
MAIN POWER + DMX mod. 7XD1F315SX
SYNTAX CABLE
CABLES
The SYNTAX® POWER+DMX has a main power line with a wires section of 3 x 1.5 mm² and one DMX 512 twisted pair cable.
The digital signal pair is shielded with an aluminium/polyester foil screen and covered with a black PVC jacket. The power line is
equipped with its own PVC jacket for added safety in compliance with the I.E.C. regulation.
Suitable for parallel controls for light mixing boards via power line and DMX signal via digital cable. Also used for analogic audio cabinets
when power supplyed. The external black PVC jacket flame-retardant is very flexible, trampling-proof, impact absorbing and water-proof.
Overall diameter 14.5 mm. Operating temperature -30° to 70° C.
DIGITAL
- Nominal Impedence:
- External jacket:
- Conductors jacket:
- Conductors:
- Drain wire:
- Screen:
- D.C.R.
- Capacitance
1-4 Mhz 110 ohm
Black PVC Ø 4,3 mm flame-retardant
red/black Foam - Skin Ø 1,4 mm
Bare OFC 24 AWG 19 x 0,12 mm
tinned OFC 24 AWG 7 x 0,20 mm
aluminium/polyester foil 100% coverage
conductors
<90 ohm/km
shield
<70 ohm/km
cond./cond.
1Khz
40 nF/km
cond./shield
1Khz
80 nF/km
POWER
- External jacket:
Black PVC Ø 7,5 mm flame-retardant
- Conductors:
3 x bare OFC 15 AWG 82 x 0,15 mm - 1.5 mm²
- Conductors jacket:Brown, Blue, Yellow-Green PVC Ø 2,5 mm twisted
email: info@syntaxnet.it - web: www.syntaxnet.it - Tel. +39 0119594160 - Fax +39 0119594166
46
SYNTAX CABLE
CABLE DRUMS
7SYCD300 - 7SYCD400
The SYNTAX® cable drums CD series are the last solution for the application which need to roll, saving the inside structure of the cable
as the internal drum housing is over sized by a diameter of 200 mm.
The drum spins are fitted by two protected bearings and include an adjustable friction-brake.
The two separate compartments allow to house the bulky cable and connectors in the smaller one and roll the cable in the large section.
Available an elastic band with VELCRO ends, to stop the cable during the transport.
A removable crank handle is housed on the drum side and the frame design allows to stack over for space-saving.
Any metal part of the cable-reel is finished by a sturdy black paint.
DIMENSIONS (mm)
A
460
7SYCD300 DIMENSIONS (mm)
C
B
D
S
L
500
500
200
90
300
P
500
A
460
7SYCD400 DIMENSIONS (mm)
C
B
D
S
L
500
500
200
90
400
P
600
SUMMARY TABLE OF DRUM CABLE CAPACITY (mt) BASED ON DIAMETER OF OUR MAIN CABLES RANGE (mm)
7SYCD300
7SYCD400
Cable diameter (mm)
drum capacity sector L (mt)
drum capacity sector S (mt)
6,2
780
1040
240
7,2
600
820
190
9,6
320
430
95
12,2
190
250
55
14,5
125
170
38
16,3
100
130
27
7SYCD300
Weight 18,0 kg.
47
18,0
90
125
23
20,8
68
90
19
22,8
50
65
15
25,2
45
60
12
27,0
34
43
9
30,0
30
40
7
7SYCD400
Weight 21,5 kg.
2010 UPDATE n° 10 ENTERTAINMENT DIVISION - SYNTAX - Via Asti 84/A - 10098 Rivoli (Turin) - ITALY
SYNTAX CABLE
CABLE DRUMS
7SYCR190
These SYNTAX® solidly constructed drums are suitable
for many uses in recording, live entertainment and outside
broadcast, and are particularly useful for the construction of
audio multicore systems.
The steel drum is supported on one side with a spindle
constructed from 40 mm steel. This means that a central
axle is not required to be attached on both sides allowing
useable panels to be mounted on one side of the drum.
At last the revolving stagebox. The centre of the drum
has a large aperture with an optional quick release plate
for stowing cable tails. A drum brake is also included as
standard.
Alternatively, the drum itself can be used as a stage box
using one of the 16, 24, or 32 holed XLR mounting side
plates, making a small easy to set up and take down rig
possible.
CLOSING SIDE PLATE
DIMENSIONS
Weight 13,0 kg.
XLR HOLED SIDE PLATE
ACCESSORY SIDE PLATES
7SYCRP16
16 holes for XLR “ D “ type
7SYCRP24
24 holes for XLR “ D “ type
7SYCRP32
32 holes for XLR “ D “ type
7SYCRP00
Closing side plate
SUMMARY TABLE OF DRUM CABLE CAPACITY (mt) BASED ON DIAMETER OF OUR MAIN CABLES RANGE (mm)
Cable diameter (mm)
drum capacity (mt)
5,5
450
6,2
350
6,5
330
7,2
270
9,6
150
11,2
100
12,2
84
14,5
60
email: info@syntaxnet.it - web: www.syntaxnet.it - Tel. +39 0119594160 - Fax +39 0119594166
16,3
45
18,0
37
20,8
25
22,8
22
48