Pressroom Supply Catalog
Quality Products • Competitive Pricing • Quick Delivery
Content
FUJI Graphic Systems Signature products...
...the true measure of value.
Part # 900087458 Ink Duct Foils and CPC Consumables
1
Ink Duct End Blocks
1
Hickey Removers
3
Sheet Separators
4
Tower Coater Blades
5
Miscellaneous Products
6
• Delivery Blowdown Fans
• Pneumatic Springs
• Feeder Brush Wheels
• Gripper Pad Gauge
• CPC Push Buttons
• O-rings (Sheet Slowdown)
• Sheet hold downs
Ink Knives and Paper Wedges
7
Feeder Belts
8
Magnifying Glasses
10
Rubber Suckers
11
Wash-Up Blades
14
Cylinder Jackets
18
Recirculation Filters
19
Plate Correction Pens
20
Plate Correction Gels
20
Wash-Up Bottles
20
Roller Lube/Cleaner
21
Part # 900087488 Part # 900087472 91.008.044/A
Don’t see all the products you use daily? Just ask
our customer service team for information about all of
your sundry supply needs. If you use it, there’s a good
chance we sell it! Make Fuji your one stop shopping
source for all you pressroom needs.
Thank you for your business!
00.472.0012
00.472.0023
82.008.119F
PROTECTIVE UNDERLAY FOIL
A two-band bi-adhesive for
placement under the ink duct foil.
70mm wide x 25m per roll. Packed
in a convenient clear plastic box
for safe storage. Packing: 1 Roll
Part#
Press
900087458
Sheetfed
900087488 Web 8 & 16
Protective underlay foils are
available for a variety of presses precut to length to save you time
and prevent waste.
Packing: 12 / box
Part#
Press
900087471
SM102
900087485
SO
900087487
SM74
900087486
SM72
900087484
MO
900087483
SM52/GTO52
900087482 QM46/DI
New Styles
Part#
Press
900087472
SMCD102
900087490
SMCD74
900087489
SM52
DUCT INSULATING STRIP
A bi-adhesive for placement under
the edge of the ink duct end block.
Packing alternatives:
Part #: 900087459
10 pcs/pack @150mm x 16mm
Part #: 900087460
150 pcs/pack @150mm x 16mm
00.580.1010
TESAMOL STRIP
91.008.033
SCRAPER CLEANER
FUJIFILM Graphic Systems is the nation’s largest
graphic supply dealer offering thousands of pressroom
items from hundreds of vendors.
With distribution centers nationwide, we offer quick
delivery of quality products at competitive pricing.
00.472.006
An adhesive foam for placement
under the ink duct foil.
9mm x 6mm x 10m/roll
Packed in a convenient clear
plastic box for safe storage.
Part #: 900087464
For ink duct fountain roller on
Heidelberg sheet fed presses.
Packing: 25 pieces per pack
Part #: 900087511
WM4ME008054
For ink duct fountain roller on
Heidelberg WEB 8/16
Packing: 25 pieces per pack
Part #: 900087512
1
INK DUCT FOILS AND CPC CONSUMABLES
For all Heidelberg CPC equipped presses
Signature
FOILS
The Signature FOIL range is manufactured to high tolerances from
top-grade PET material ensuring:
• Maximum chemical, thermal and mechanical strength for long life
without ink duct contamination.
• Only virgin resin suppliers are used - no recycled polyester.
• Tested using both conventional and UV inks.
• Permanently formed for a secure and accurate fit.
• Compact, low volume packaging for safe, easy and cost effective
transportation and storage.
PART #
900087455
900087494
900087479
900087418
900087457
900087456
900087461
900087463
900087480
900087453
900087492
900087478
900087454
900087491
900087477
900087466
900087493
900087462
900087451
900087468
900087474
900087452
900087469
900087475
900087419
900087470
900087476
900087420
900087467
900087473
900087450
900087495
900087501
900087447
900087498
900087504
900087449
900087448
900087496
900087502
900087446
900087445
900087497
900087503
DESCRIPTION
Fountain Liner CD 102
Fountain Liner CD 102 Fountain Liner CD 102UV
Fountain Liner SM 102
Fountain Liner SM102 Fountain Liner SM102UV
Fountain Liner XL 105
Fountain Liner XL 105
Fountain Liner XL 105UV
Fountain Liner CD 74
Fountain Liner CD 74
Fountain Liner CD 74UV
Fountain Liner SM 72/74
Fountain Liner SM 72/74
Fountain Liner SM 72/74UV
Fountain Liner Heid XL75
Fountain Liner Heid XL75 Fountain Liner Heid XL75UV
Fountain Liner GTO 52 Fountain Liner GTO 52
Fountain Liner GTO 52UV
Fountain Liner SM 52
Fountain Liner SM 52
Fountain Liner SM 52UV
Fountain Liner MO 25/65 Fountain Liner MO 25/65
Fountain Liner MO 25/65UV
Fountain Liner QM 46
Fountain Liner QM 46
Fountain Liner QM 46UV
Fountain Liner Web 8 w/foam
Fountain Liner Web 8 w/foam
Fountain Liner Web 8UV w/foam
Fountain Liner W16/M600 w/foam
Fountain Liner W16/M600 w/foam
Fountain Liner W16/M600UV w/foam Fountain Liner Web M-110 no foam
Fountain Liner Web M-110 w/foam Fountain Liner Web M-110 w/foam Fountain Liner Web M-110UV w/foam Fountain Liner Web130 (no foam) Fountain Liner Web130 w/foam Fountain Liner Web130 w/foam Fountain Liner Web130UV w/foam SIZE
1068 x 229mm
1068 x 229mm
1068 x 229mm
1068 x 232mm
1068 x 232mm
1068 x 232mm
1068 x 229mm
1068 x 229mm
1068 x 229mm
775 x 228mm
775 x 228mm
775 x 228mm
775 x 232mm
775 x 232mm
775 x 232mm 775 x 229mm
775 x 229mm
775 x 229mm
547 x 200mm
547 x 200mm
547 x 200mm 547 x 197mm 547 x 197mm
547 x 197mm 676 x 200mm
676 x 200mm
675 x 200mm
358 x 200mm 358 x 200mm 358 x 200mm 548 x 260mm 548 x 260mm 548 x 260mm 1002 x 260mm 1002 x 260mm 1002 x 260mm 740 x 260mm 740 x 260mm 740 x 260mm 740 x 260mm 994 x 260mm
994 x 260mm
994 x 260mm
994 x 260mm
THICK
7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 12 mil 7.5 mil 10 mil 2 mil 7.5 mil
7.5 mil 10 mil 12 mil 7.5 mil 7.5 mil 10 mil 12 mil QTY
100
100
50
100
100
50
100
100
50
100
100
50
100
100
50
100
100
50
100
100
50
100
100
50
100
100
50
100
100
50
50
50
50
50
50
50
100
50
50
50
100
50
50
50
BENDS
2
2
2
3
3
3
2BT
2BT
2BT
2
2
2
3
3
3
2BT
2BT
2BT
3
3
3
2
2
2
3
3
3
3
3
3
3 w/foam
3 w/foam
3 w/foam
3 w/foam
3 w/foam
3 w/foam
3
3 w/foam
3 w/foam
3 w/foam
3
3 w/foam
3 w/foam
3 w/foam
2 BENDS
2 BENDS
TIGHT (2BT)
3 BENDS
3 BENDS
w/foam
2
INK DUCT END BLOCKS
for Heidelberg Presses and Kompac Systems
Signatureink duct end blocks are made of the highest quality engineering grade plastic
polymer (POM) which can endure high cyclic stress loading. This ensures high strength
and wear resistance translating into a long life in production.
Signature ink duct end blocks are precision engineered on modern CNC machines
ensuring an exceptional tight fit to the ink duct roller.
Signature ink duct end blocks are supplied with tab, screw and scraper cleaner mounted
and ready to use (with the exception of the QM46 and QM46-DI models which do not
require this).
Part #: 900087513 Part #: 900087514 MV.034.739
MV.027.163
Part #: 900087913
Part #:900087915
A4.008.323 - O/S
A4.008.324 - D/S
Model: Heidelberg PrintMaster 46
Description: Dampening seals Packing: 1 set (DS/OS)
Model: Heidelberg QuickMaster 46
Description: Dampening seals
Packing: 1 set (DS/OS)
Left and right spare tabs with screws 1 set with screws/bag
Part #: 900087914
AI.008.104/01
Part #: 900087916
MV.037.346
Part #: 900087917
MV.022.805
Heidelberg QM46 1 pair/bag
1 pair/bag
Heidelberg GTO52
with CPC and CPT 1 pair/bag
Part #: 900087918
63.008.113
Part #: 900087961
1 pair/bag
Heidelberg SM74 Heidelberg MO Part #: 900087965
Teflon seal sets for
Kompac II Systems
92370
1 pair/bag
M2.008.113F/02
1 pair/bag
Heidelberg SM74CD
1 pair/bag
Part #: 900087920
G2.008.113 F/ - OS
G2.008.112 F/ - D/S
Part #: 900087962 L2.008.114F - O/S
L2.008.113F - D/S
1 pair/bag
Part #: 900087963
MV.025.468
1 pair/bag
1 pair/bag
90850
Part #: 900087968
93930
Teflon seal sets for Kompac
III Systems (GTO/MO) 1 pair/bag
Cleaning seals for
Kompac II Systems
25 pcs/bag
Part #: 900087966
Heidelberg QM46-DI
Part #: 900087967
Cleaning seals for
Kompac III Systems
94900
25 pcs/bag
3
HICKEY REMOVERS
Signature hickey removers are designed and
manufactured to original specifications. We
use the highest quality raw materials including
corrosion-proof steel and chemical resistant
rubber. The molded rubber tips are chemically
bonded to the steel preventing separation.
Heidelberg
Part #: 900087974
MAN Roland
93.205.516/B
Model: Speedmaster 102 and SM72
with ALCOLOR
Part #: 900087976
005X270230
Description: Hickey remover
Complete assembly. Made of
steel with a handle of lacquered
hard wood ensuring long life in
production.
Model: Roland 800
Description: Replacement rubber
Packing: 5 pieces/bag
Packing: 1 piece
Part #: 900087973 93.205.504/B
Model: Speedmaster 102
Part #: 900087977
001X186630
Model: Roland 600, RVK3B,
Description: Replacement rubber
PARVA, FAVORIT OB, 200
Packing: 5 pieces/bag
Description: Replacement rubber
Packing: 5 pieces/bag
Part #: 900087972
M2.033.061S/03
Model: Speedmaster 74
Description: Hickey remover
Complete assembly. Made of
steel with rubber tip molded and
chemically bonded on.
KBA
Model: KBA 104/105
Part #: 900087980
Description: Made of steel with
rubber tip chemically bonded on
preventing separation from metal
during usage.
Packing: 1 piece
Packing: 1 piece
Part #: 900087969
G2.207.001
Model: Speedmaster 52
Description: Hickey remover
Complete assembly. Made of
aluminium with rubber tip molded
and chemically bonded on.
Packing: 1 piece
Komori
Part #: 900087979
444 4271 02A
Model: Komori Lithrone
Description: Made of steel with
rubber tip chemically bonded on
preventing separation from metal
during usage.
Packing: 1 piece
Part #: 900087970 (MO)
93.024.025F/F
Part #: 900087971 (SO/72)43.024.025F/02A
Model: SORS, SORD, SORM, MO,
SM72 w/standard dampening
Description: Hickey remover Complete assembly. Made of
lacquered hard wood with hickey
remover wedged in and fastened in
place. Includes steel plate/screws
for positioning on press.
Packing: 1 piece
Also available: P
art #: 900087975 Heidleberg XLT 105
Part #: 900087978 MAN Roland 200
4
SHEET SEPARATORS
Heidelberg
Part #: 900087981 66.028.810F/01
Model: Speedmaster/
S-Offset
Thickness: 0.20mm/0.008”
Part #: 900087988
L4.028.164S/
Part #: 900087982 66.028.110F
1 piece
Model: Speedmaster/
S-Offset
Thickness: 0.20mm/0.008”
Speedmaster 52/74
Description: Sheet separator Description: Sheet separator cpl.
Fork with bent frame.
Packing: Model: Part #: 900087989
L4.028.165S/
Part #: 900087990
L4.028.167S/
Packing: 1 set
Model: Speedmaster 52/74
Description: Sheet separator Packing: 1 set
Model: GTO single sheet feeder
Description: Sheet separator
cpl. Blade with
bent frame.
Part #: 900087983
Packing:
1 piece
Model: Speedmaster/
S-Offset
Thickness: 0.20mm/0.008”
Part #: 900087991
Part #: 900087986 L4.028.168S/
04.022.069
Description: Sheet separator Brush.
Description: Sheet separator cpl.
Fork with flat frame.
Packing: Model:
Speedmaster/
S-Offset
Thickness: 0.20mm/0.008”
Description: Sheet separator
cpl. Blade with flat frame.
Packing: Part #: 900087985
66.028.109F
Model: 04.022.069F/02
Part #: 900087993 42.017.083F
1 piece
Speedmaster/
S-Offset
Part #: 900087995 43.017.078F
1 piece
Part #: 900087997 Roland
Part #: 900088001 A99Z-005395
Model:
Roland 800
Description: Sheet separator
Brush
Packing: Model: GTO single sheet feeder
Description: Sheet separator cpl.
Brush with clamp.
Description: Sheet separator Brush.
Packing: 1 piece
1 piece
Part #: 900087987 Part #: 900087984
Packing: Part #: 900087999
43.017.079
Packing: 1 piece
Model: GTO46 with rubber
hood
Thickness:
1.0mm / 0.039”
Packing: 1 piece
Model: GTO52 with rubber
hood
Thickness:
1.0mm / 0.039”
Packing: 1 piece
Model: Sheet separator
(45°) for GTO
Thickness:
0.30mm / 0.012”
Packing: 1 piece
Model: Rubber hood for
sheet separator
GTO46 & GTO52
Packing: 12 pcs/bag
1 piece
5
TOWER COATER BLADES
for Heidelberg coating towers
C4.721.074 D/S
Model: SM102
Model: C4.721.091 D/S
Description: Coater blade - small
(Rakel) for coating
tower - drive side
Packing: Packing: 1 piece
C4.721.075 O/S
Model: SM102
1 piece
Part #: 900088051
Part #: 900088009
SM102
Description: Coater blade - large
(Rakel) for coating
tower - drive side
Model: C4.721.092 O/S
SM102
Description: Coater blade - large
(Rakel) for coating
tower - operator side
Description: Coater blade - small
(Rakel) for coating
tower - operator side
Packing: Packing: 1 piece
1 piece
Part #: 900088052
Part #: 900088010
F L AT S H E E T S E PA R AT O R S
mm
31
4
mm
19
Part #
900088022
0.10mm / 0.004”
900088023 0.20mm / 0.008”
900087937
0.20mm / 0.008”
900088024 0.30mm / 0.012”
900087938
Packing: 0.30mm / 0.012”
25 pcs/bag
Packing: 25 pcs/bag
Thickness (mm/inch)
mm
42
Flat sheet separators for Mitsubishi
5
Thickness (mm/inch)
900087939
0.10mm / 0.004”
900087940 0.20mm / 0.008”
900088021
0.30mm / 0.012”
Packing: 25 pcs/bag
mm
32
m
m
4m
Part #
m
11.5
mm
15
mm
.5
21
m
m
.5m
11
mm
50
0.20mm / 0.008”
900088027 0.30mm / 0.012”
Packing: 25 pcs/bag
Part # mm
.5m
Packing: 0.10mm / 0.004”
900088026
Flat sheet separators for Mitsubishi
Thickness (mm/inch)
900088028 0.15mm / 0.006”
Thickness (mm/inch)
900088025
mm
11
m
mm 21.5
3.5
5m
mm
Part # Part # 65
Bent sheet separators for
Mitsubishi
m
0m
m1
m
5m 10m
Thickness (mm/inch)
0.10mm / 0.004”
Flat sheet separators for Komori,
Fuji-Shinohara and Hashimoto
19
900087936
Part #
m
2m
Flat sheet separators for Komori,
Fuji-Shinohara and Hashimoto
mm
15
15
mm
Flat sheet separators for
Heidelberg, Roland, Mitsubishi,
KBA and miller
12 pcs/bag
mm
50
Thickness (mm/inch)
900088029 0.15mm / 0.006”
Packing: 25 pcs/bag
6
M I S C E L LA N E O U S P R O D U C T S
DELIVERY BLOWDOWN FANS
Part #: 900088312
Part #: 900088313
Model: Part #: 900088054 00.580.3118
Heidelberg SM102,
MO & GTO
30
0m
Description: Fan for SM102, MO
& GTO delivery w/
terminal connection
Model:
Heidelberg SM102,
MO & GTO
b) 900088313 93.115.241
a) 900088312 C2.115.1411
Description: Fan for SM102, MO
& GTO delivery w/
wire connection
Part #: 900088055 66.020.122
Packing: 1 fan/box
40 boxes/carton
Close up picture of the two types
of connections:
42
0m
m/
Part #: 900088053
00.580.2722
m/
11
16
7/8
”
1/2
”
Part #: 900088505
04.024.061 Part #: 900088506
04.024.062
66.891.006
BRUSH WHEELS
Model:
Heidelberg SM102,
74 and 72
Packing: 1 piece
Model:
Heidelberg SM102,
74 and 72
Packing: GREASE GUN / OIL GUN
Model: All Heidelberg
presses
Packing: 1 piece
RUBBER WHEELS
Part #: 900088057 Part #: 900088058 Model: Rubber Wheel HARD
for Heidelberg
Packing: 1 piece/bag
Model: Rubber Wheel SOFT
for Heidelberg
Packing: 1 piece/bag
1 piece
CPC PUSH BUTTONS
Model:
Heidelberg w/CPC
Description: For Heidelberg CPC
consol - ink control
Packing: Part #: 900088063
27.024.005
GRIPPER PAD GAUGE
Model:
1 piece
REPLACEMENT BULBS
Packing: Part #: 900088062 (Rec)
Part #: 900088507 28V Bi-pin
O-RINGS
Model:
Part #: 900088038
66.072.096
Heidelberg SM102,
GTO, MO and SM52
1 piece
SHEET HOLD DOWNS
Model:
Heidelberg offset presses
Description: HSHL-Sheet hold
down: large
Description: Slowdown O-rings
for delivery
Packing: Heidelberg CD102,
SM102/72,
S-OFFSET
Description: Gripper Pad Gauge (paper/cardboard)
Part #: 900088508 12V Bi-pin
Part #:900088065 (102)
00.580.1617
900088067 (52)
00.580.4270
900088066 (MO/GTO) 00.580.1069
Model: Heidelberg SM102
Description: Pneumatic spring for
SM102 Safety guard
Packing: 1 piece
b)wire (for SM102 s/n 508803+)
Description: Black brush feeder
wheel with hard
bristles for card
board
Part #: 900088061 (Sqr) 81.186.3855/02
Model: Heidelberg SM102
Description: Pneumatic spring for
SM102 delivery
Packing: 1 piece
a) terminal (for CD SM102 s/n 540xxx+)
Description: White brush feeder
wheel with soft
bristles for paper
Part #: 900088056 Pneumatic Springs
6 pieces/bag
Part #: 900088037
58.022.396
Part #: 900088039
HSHS-Sheet hold
down: small
HSHLL-Sheet hold
down: lateral
Packing: 1 piece
7
INK KNIVES AND PAPER WEDGES
Signature ink knives are manufactured in one piece from
durable polypropylene making them tough, flexible and
solvent resistant.
With rounded edges, there is no risk of damaging
rubber, plastic or Teflon parts on the press.
Part #: 900088074
NEW
Very popular with press operators, the special blade
angle and light weight make them easy to use.
Supplied in sets of four knives in plain white carton boxes.
Part #
Description
900088073 4 knives/box Yellow, red,
blue and black
900088074
Size (LxW)
270x70mm (10 3/4” x 2 3/4”)
1 knife/bag White 298x80mm (11 3/4” x 3 1/8”)
Signature Paper Wedges
Manufactured with thin, smooth and extra strong lead
edges these paper wedges are easily inserted in paper
stacks without damaging stock.
Made of high strength, durable polypropylene which will
not absorb oil, ink or dirt.
Equipped with handy finger sized holes for easy removal
from the paper pile.
Our paper wedges ensure accurate leveling of paper
stacks and with their long taper permit fine adjustments.
At the press feeder end they enable positive paper pick-up
and at the delivery end they ensure proper jogging.
Four sizes are suitable for the entire press range from
duplicators to large sheet fed presses.
Paper Wedges
Part #
Description Size (LxWxH)
900088078 Baby Wedge100x30x30mm (3 15/16” x 1 1/4” x 1 1/4”)
900088079 Small wedge 200x30x30mm (7 7/8” x 1 1/4” x 1 1/4”)
900088080 Medium wedge200x60x30mm (7 7/8” x 2 3/8” x 1 1/4”)
900088081 Large wedge200x75x25mm (7 7/8” x 2 15/16” x 1”)
Paper Pile Corners
Precision cut to exact height and uniformly bent.
Conveniently punched holes for easy handling. Rounded
corners and edges to protect hands and fingers. Space
saving - easily stacked and stored in a cabinet.
Part#
Size
900088082 Paper Pile Corners - 9”
900088083 Paper Pile Corners - 5”
8 per box
8 per box
Part #: 900088073
8
FEEDER BELTS
Quality Belts for the
Printing Industry!
Using the best materials available
and state-of-the-art manufacturing
equipment our team of professionals
can assure you of a superb product.
Belt Master belts are found throughout
the printing industry handling the most
demanding belt applications.
We supply all types of belts elastomer,
wear resistant polyurethane, woven
endless, self tracking, vacuum, with
or without carcass, covered, sealed,
fused and anti-static you name it and
we can make it to your specifications.
Our computerized punching machines
can make almost any pattern of round
perforations for vacuum belts and other
shapes may be available with extra
charge for tooling or special die.
Let us work with you toward a profitable,
B E L T MASTER
BELT GLUING UNIT
• For belt width up to 90mm/3 1/2”
• Even heat distribution
top quality product guaranteed to meet
• Automatic temperature regulation
your highest expectations.
Part #: 900088084
• Light, handy and easy to use
BELT MASTER ADHESIVE
10 ml bottle
Note: if we don’t have what
you need - we can make it!
E
ready to assemble
PRE
CISION CUT
LE
XIB
LE
BELT
MASTER
L
AB
DUR
KOMORI, MITSUBISHI, KBA
M A ST
LT
ER
Also enquire about:
BE
Part #: 900088085
F
!
e
w
k
o
a
fl
m
r
We the pape
9
PRE-CUT F E E D E R B E L T S
UNIQUE PACKAGING
PERFECT SKIVING
HEIDELBERG MO
Part #: 900088100
Feeder Table Belts
HEIDELBERG SM74
Part #: 900088102
HEIDELBERG SM102
Part #: 900088105
For easy handling and safe
storage with clear, precise
labeling detailing product code,
press model, length and width.
HEIDELBERG
For accurate and easy
assembly!
PRECISION PERFORATIONS
le, ,
b
a
r
u
D exible
Fl ti-static
An
Part #: MFG P/N MODEL:
900088098
89.020.007/01B
GTO52
900088100
53.020.029
MO
900088101
66.020.080/F
SORK/SORM SORD
900088099
G2.020.009
SM52 ENDLESS BELT
900088102
MV.025.949
SM74 (1 set: 1 perforated/1 standard)
900088105
86.020.029/D
SM102/72
900088108
MV.032.934
SM74 SLOWDOWN BELT (YELLOW) RAISED
900088112
M2.015.878
SM74 SLOWDOWN BELT (YELLOW) FLAT
900088110
MV.032.933
SM74 SLOWDOWN BELT (GREY) RAISED
900088114
M2.015.881F
SM74 SLOWDOWN BELT (GREY) FLAT
900088116
M2.015.357/01
SM74 SLOWDOWN BELT (PINK) RAISED
900088107
C3.015.453
SM102 SLOWDOWN BELT
SLOW DOWN BELTS
Part #: 900088110
Part #: 900088116
HEIDELBERG SM52
Part #: 900088099
Perforations enable the belts
to have air suction ensuring
the material is conveyed as
intended and also allows for
cooling air to pass through.
Examples of precise perforation
patterns. Perforations can
be executed according to
customer’s specifications.
ut,
c
n
o
i
s
i
c
Pre
ived
k
s
d
n
a
punched
Part #: 900088102
SM74 s/n 622818
for thin paper/material
Part #: 900088108
Part #: 900088098
Sheet Slowdown Belt for
HEIDELBERG SM74
Part #: 900088107
Sheet Slowdown Belt for
HEIDELBERG SM102 s/n 529811+, SM72,
SM74 s/n 621124+, CD102 s/n 543064+
SM74 Self tracking belts
HEIDELBERG SM74
HEIDELBERG GTO52
SM74 sheet slowdown belt.
Punched, endless with self
tracking guide. Five models
available in grey, yellow & pink.
SM102 sheet slowdown belt
- perforated in staggered
pattern and assembled for
easy installation.
MAN ROLAND Feeder Table Belts
Part #: 900088117
Part #: MODEL:
900088121 FAVORIT OB
900088123 R200
900088118 R300
9000 PARVA
Part #: 900088118
KOMORI Feeder Table Belts
ROLAND 700
ROLAND 300
Part #: MODEL:
900088119 REKORD 3B
900088120 R600
900088117 R700
9000
R800
Part #: MODEL:
Part #: 900088124 KOMORI LITHRONE 40 900088126
900088125 KOMORI LITHRONE 28 900088127
MODEL:
KOMORI LITHRONE 26”
KOMORI SPRINT 26”
10
magnifying glasses
PART #:
A) 900088134
PART #:
A) 900088141
B) 900088135
B) 900088142
PART #:
A) 900088136
B) 900088137
PART #: 900088143
PEN TYPE 16X - 40X
PART #: 900088144
A) Illuminated Microscope
with focus and 50X
magnification.
B) Illuminated Microscope
with focus and 30X
magnification.
Both models are produced in
black and clear hard durable
plastic and delivered in
individual black vinyl pouches
in printed cardboard boxes.
A) Illuminated Microscope
with focus and stand with
30X magnification.
B) Illuminated Microscope
with focus and stand with
50X magnification.
Both models are produced in
black and clear hard durable
plastic and delivered in
individual black vinyl pouches
in printed cardboard boxes.
A) Illuminated Microscope
with focus and light
condenser with 50X
magnification.
B) Illuminated Microscope
with focus and light
condenser with 40X
magnification.
Both models are produced in
black and clear hard durable
plastic and delivered in
individual black vinyl pouches
in printed cardboard boxes.
Pentype Microscope with
focus and magnification from
16X - 40X
This model is produced in
black lacquered metal with
optical glass lenses and
delivered in individual gift
boxes.
Flashlight magnifying glass
with 10X magnifications.
This model is produced
in black plastic and white
lacquered metal with plastic
lens and delivered in
individual cardboard boxes.
A) Large magnifying glass
PART #:
with 6X magnification
A) 900088145
B) Medium magnifying glass
B) 900088146
with 8X magnification
C)Small magnifying glass
C) 900088147
PART #: 900088148
PART #:
A) 900088149
B) 900088150
PART #: 900088151
PART #: 900088152
with 10X magnification
These models are produced
in black lacquered metal with
two optical glass lenses in
small individual vinyl pouches.
Large magnifying glass with
6X magnification.
Solid back - giving extra
space for company name,
logo or general advertising.
This model is produced
in black lacquered metal
with one optical glass lens.
Supplied in vinyl pouch.
A) Large magnifying glass
with 5X magnification
B) Small magnifying glass
with 8X magnification
These models are produced
in black plastic with plastic
lenses in individual cardboard
boxes.
Openbrig magnifying glass
with 10X magnification.
The Openbrig magnifying
glass is produced in strong
black and clear PVC and
delivered in individual round
vinyl pouch with zipper.
Measuring magnifying glass
with 10X magnification.
The measuring glass has an
aluminium stand with a glass
bottom, showing millimeter
measurements. It is produced
in strong black plastic with
optical lens and delivered in
individual cardboard boxes.
11
RUBBER SUCKERS
FLAT RUBBER SUCKERS
VARIOUS PRESSES
Part #
MATERIAL COLOR
OUTSIDE
INSIDE
900088153 Natural Rubber Blue 38mm 1 1/2” 13mm 1/2”
900088154 Natural Rubber
Grey
25 pcs/pack
38mm 1 1/2” 13mm
1/2” 0.8mm 1/32”
25 pcs/pack
900088155 Natural Rubber Orange 38mm 1 1/2” 13mm
1/2” 0.5mm 1/64”
25 pcs/pack
900088187 Natural Rubber
Grey
32mm 1 1/4” 13mm
1/2” 0.8mm 1/32”
25 pcs/pack
900088180 Natural Rubber
Grey
30mm 1 3/16” 13mm
1/2” 0.8mm 1/32”
25 pcs/pack
900088156 Natural Rubber Natural 21mm 53/64” 7.5mm
5/16” 0.8mm 1/32”
25 pcs/pack
900088157 Natural Rubber Natural 21mm 53/64” 7.5mm
5/16” 0.5mm 1/64”
25 pcs/pack
900088158 Natural Rubber
15/64” 2mm
5/64”
25 pcs/pack
5/64”
25 pcs/pack
Suckers for other press models are available.
Just call your local customer service team or our
national call center at 800-638-5778.
Ryobi
OUTSIDE
16mm
5/8”
PACKING
3/64”
Red
26mm 1 1/32” 6mm
900088159 Natural Rubber White 22mm
Part #
COLOR
900088050 Natural
THICKNESS
1mm
INSIDE
4mm
5/32”
7/8”
3mm
1/8”
2mm
Muller Martini
Part #
COLOR
OUTSIDE
INSIDE
900088164 Red
15/32”
12mm
15/64”
6mm
5/16”
Part #
HEIGHT
PACKING
8mm 12pcs/pack HEIGHT PACKING
4.5mm 25pcs/pack
11/64”
OUTSIDE
INSIDE
HEIGHT
900088165 Red
COLOR
21mm
53/64”
6mm
15/64”
15mm 12pcs/pack
19/32”
PACKING
Part #
COLOR
OUTSIDE
INSIDE
HEIGHT
900088166 Black
21mm
53/64”
6mm
15/64”
15mm 12pcs/pack
19/32”
Part #
COLOR
OUTSIDE
INSIDE
HEIGHT
900088167 Green
25mm
63/64”
6mm
15/64”
COLOR
OUTSIDE
INSIDE
900088168 Black
25mm
63/64”
6mm
15/64”
Mitsubishi
Part #
COLOR
OUTSIDE
INSIDE
HEIGHT
900088161 Black
KA24236-A
27mm
1 1/16”
7.5mm
19/64”
8mm 12pcs/pack
5/16”
PACKING
PACKING
Sandmar
Part #
COLOR
OUTSIDE
INSIDE
HEIGHT
PACKING
900088162 Beige
18mm
23/32”
6mm
15/64”
6.5mm 25pcs/pack
1/4”
COLOR
OUTSIDE
INSIDE
HEIGHT
900088163 Natural
19mm
3/4”
7mm
9/32”
7mm 25pcs/pack
9/32”
PACKING
14.5mm12pcs/pack
37/64”
AB-Dick
Part #
PACKING
Part #
HEIGHT
PACKING
14.5mm12pcs/pack
37/64”
12
RUBBER SUCKERS
FLAT RUBBER SUCKERS
HEIDELBERG
Part #
900088169
MATERIAL
SILICON
Red
38mm 1 1/2” 13mm
1/2”
3/64”
25 pcs/pack
900088170
SILICON
Red
38mm 1 1/2” 13mm
1/2” 0.8mm 1/32”
25 pcs/pack
900088171
SILICON
Red
38mm 1 1/2” 13mm
1/2” 0.5mm 1/64”
25 pcs/pack
900088172
SILICON
Red
32mm 1 1/4” 13mm
1/2”
3/64”
25 pcs/pack
900088173
66.028.406/C
SILICON
Red
32mm 1 1/4” 13mm
1/2” 0.8mm 1/32”
25 pcs/pack
900088174
SILICON
Red
32mm 1 1/4” 13mm
1/2” 0.5mm 1/64”
25 pcs/pack
900088181 04.016.071
OUTSIDE
INSIDE
THICKNESS
1mm
1mm
PACKING
900088175
66.028.404/B
“PER”Synthetic Clear 38mm 1 1/2” 13mm
1/2”
3/64”
25 pcs/pack
900088176
“PER”Synthetic Clear 32mm 1 1/4” 13mm
1/2” 0.5mm 1/64”
25 pcs/pack
900088177
“PER”Synthetic Clear 30mm 1 3/16” 13mm
1/2” 0.8mm 1/32”
25 pcs/pack
900088178
89.028.401/01
“PER”Synthetic Yellow 24mm 15/16” 10mm
3/8” 0.8mm 1/32”
25 pcs/pack
900088179
66.028.402
Natural Rubber
1mm
Grey
38mm 1 1/2” 13mm
1/2”
3/64”
25 pcs/pack
900088180 Natural Rubber Grey
30mm 1 3/16” 13mm
1/2” 0.8mm 1/32”
25 pcs/pack
Part #
COLOR
1mm
66.028.401
COLOR
OUTSIDE
INSIDE
HEIGHT
PACKING
Grey
27mm
1 1/16”
7mm
9/32”
6mm 25pcs/pack
15/64”
42.016.072
Part #
900088182 COLOR
OUTSIDE
INSIDE
Red
19mm
3/4”
7mm
9/32”
HEIGHT
PACKING
3mm 25pcs/pack
1/8”
Part #
COLOR
OUTSIDE
INSIDE
HEIGHT
COLOR
OUTSIDE
INSIDE
900088183 42.016.073
Black
16.5mm
21/32”
7mm
9/32”
7mm 12pcs/pack
9/32”
900088184
Black
A1.016.327/04
15.5mm
39/64”
4mm
5/32”
Part #
COLOR
OUTSIDE
INSIDE
HEIGHT
Part #
COLOR
OUTSIDE
INSIDE
HEIGHT
900088185 Black
28mm
1 7/64”
17mm
43/64”
6mm 12pcs/pack
15/64”
900088186 Black
30.5mm
1 13/64”
5.5mm
7/32”
12mm 12pcs/pack
15/32”
66.028.405
PACKING
Part #
PACKING
HEIGHT
PACKING
16.5mm12pcs/pack
21/32”
PACKING
13
RUBBER SUCKERS
ROLAND
FLAT RUBBER SUCKERS
Part #
MATERIAL COLOR
OUTSIDE
INSIDE
THICKNESS
900088189 Natural Rubber Blue 38mm 1 1/2” 15mm 19/32” 1mm 3/64”
S99Z702195
PACKING
25 pcs/pack
900088190
090R600440
Natural Rubber
Blue
38mm 1 1/2” 15mm 19/32” 0.7mm 1/32”
25 pcs/pack
900088201
090R600340
Natural Rubber
Blue
35mm 1 3/8” 15mm 19/32” 1mm
3/64”
25 pcs/pack
900088202
Natural Rubber
Blue
35mm 1 3/8” 15mm 19/32” 0.7mm 1/32”
25 pcs/pack
900088203
090R600240
Natural Rubber
Blue
32mm 1 1/4” 15mm 19/32” 1mm
3/64”
25 pcs/pack
900088204
Natural Rubber
Blue
32mm 1 1/4” 15mm 19/32” 0.7mm 1/32”
25 pcs/pack
Man Roland
Accordion Sucker
For Roland 700 & 300
Part #
COLOR
OUTSIDE INSIDE
900088206 Brown
30.5mm 15.5mm 15.5mm12pcs/pack
1 13/64” 39/64”
39/64”
021F013230
HEIGHT
PACKING
HAMADA
FLAT RUBBER SUCKERS
Part #
900088208
Natural Rubber Natural 21mm 53/64” 7.5mm
5/16” 0.8mm 1/32”
25 pcs/pack
900088209
Natural Rubber Natural 21mm 53/64” 7.5mm
5/16” 0.5mm 1/64”
25 pcs/pack
Part #
MATERIAL
OUTSIDE
INSIDE
THICKNESS
PACKING
COLOR
OUTSIDE
INSIDE
HEIGHT
COLOR
OUTSIDE
INSIDE
HEIGHT
900088210 Beige
0020.1901
20mm
25/32”
6mm
15/64”
9mm 12pcs/pack
23/64”
900088211 Grey
16mm
5/8”
6mm
15/64”
9.5mm 12pcs/pack
3/8”
Part #
OUTSIDE
INSIDE
HEIGHT
Part #
HEIGHT
900088212 Brown/
18mm
transparent 23/32”
4mm
5/32”
17mm 12pcs/pack
43/64”
COLOR
PACKING
COLOR
PACKING
Part #
COLOR
OUTSIDE
INSIDE
900088213 Black
16.5mm
21/32”
12mm
15/32”
PACKING
PACKING
36mm 12pcs/pack
1 27/64”
14
WASH-UP BLADES
The Superblade
Our wash-up blades are manufactured to fine tolerances for perfect
fit on old and new presses alike. They are resistant to chemical attack
from inks and solvents and are highly efficient and durable.
gth
Superblades give excellent wash-up results reducing the amount of
n
Le
wash-up chemicals used and less down-time on the press.
Superblades are available for the vast majority of offset sheet-fed, web and
f
ro
les
ho
e
mb
Nu
continuous form presses in either metal/rubber, rubber or plastic format. Each
individual blade is presented in a plastic sleeve with the machine reference for
easy identification.
• Size and style specification guaranteed
• High resistance to wear
dth
Wi
• Accurate fit first time - no adjustment required
e
kn
ic
Th
ss
Type :
• Corrosion-proof steel
F = Fibre
C = Combination
M = Metal
P = Plastic
R/RE = Rubber
Part No
Model
HEID01 (Heidelberg)
HEID02
900087923
900087924
HEID35
900087925
HEID36
900087927
HEID07
HEID56
HEID49
HEID37
900087926
900087928
900087929
HEID12
HEID54
900087930
900087942
HEID48
HEID52
HEID51
HEID17
HEID46
HEID16
HEID15
HEID18
HEID08
HEID19
HEID20
HEID21
HEID22
HEID23
HEID24
HEID55
HEID25
HEID26
HEID27
HEID28
HEID29
HEID30
HEID31
TOK Plastic
TOK (Metal)
Quickmaster
GTO 46
GTO 46 Numbering Unit
GTO 52
GTO 52 Numbering Unit
MO MO Blanket (Short)
MO (Rigid)
MO (Special length)
MO Numbering Unit
Speedmaster 52
Speedmaster 72 Speedmaster SORM/SM 72
Speedmaster 72 Blanket
Speedmaster 72 AW New HDM
Speedmaster 74
Speedmaster 102
Speedmaster 102 (Teflon)
Speedmaster 102 (HDPE)
Speedmaster 102 (With 11 slots)
Speedmaster 102 A/W
Speedmaster 102 AW New
Speedmaster 102 AW New (Teflon)
Speedmaster 102 CD
Speedmaster 102 VP
Rotaspeed
KOR
KORA
KORD 62
KORD 64
KORS
SOR Rigid
SOR Z Rigid
SORD Flexi
SORD Rigid
SORK Flexi
SORK Rigid
SORM Flexi
SORM Rigid
SORM Z Flexi Pre 1995
• Chemical resistant rubber and plastic
• Individually packed in protective sleeve
• Molded rubber tip chemically bonded - no breakdown
(MM) (Inches)
Type Length
Width
Thk
Length
P
M
P
M
C
M
C
M
M
M
M
C
M
M
M
M
M
M
M
P
P
M
M
M
P
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
283
283
375
500
448
560
508
710
692
710
720
648
605
790
753
790
742
820
1090
1090
1090
1090
1042
1042
1042
1090
1052
1050
600
622
650
690
760
890
890
960
960
710
721
790
790
753
43
43
43
60
40
60
40
60
60
60
60
52
46
60
40
60
57
57
60
60
60
60
60
57
57
60
40
60
50
50
50
50
50
50
51
60
50
60
50
60
50
42
3.0
0.5
3.0
0.5
6.0
0.5
6.0
0.5
0.5
2.0
0.5
6.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
3.0
5.0
0.5
0.5
0.5
5.0
0.5
0.5
0.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.5
2.0
0.5
2.0
0.5
2.0
0.5
11 5/32
11 5/32
14 3/4 19 11/16
17 5/8 22 1/16
20
27 15/16
27 1/4 27 15/16
28 11/32
25 1/2 23 13/16
31 3/32
29 5/8 31 3/32
29 7/32
32 9/32
42 29/32
42 29/32
42 29/32
42 29/32
41
41
41
42 29/32
41 13/32
41 11/32
23 5/8 24 1/2 25 19/32
27 5/32
29 15/16
35
35
37 25/32
37 25/32
27 15/16
28 3/8 31 3/32
31 3/32
29 5/8 No
Width
Thk
Holes
1 11/16
1 11/16
1 11/16
2 3/8 1 9/16
2 3/8 1 9/16
2 3/8 2 3/8 2 3/8 2 3/8 2 1/16
1 3/16
2 3/8 1 9/16
2 3/8 2 1/4 2 1/4 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 1/4 2 1/4 2 3/8 1 9/16
2 3/8 1 31/32
1 31/32
1 31/32
1 31/32
1 31/32
1 31/32
2
2 3/8 1 31/32
2 3/8 1 31/32
2 3/8 1 31/32
1 21/32
1/8 1/64
1/8 1/64
15/64
1/64
15/64
1/64
1/64
5/64
1/64
15/64
1/64
1/64
1/64
1/64
1/64
1/64
1/64
1/8 3/16
1/64
1/64
1/64
3/16
1/64
1/64
1/64
5/64
5/64
5/64
5/64
5/64
5/64
5/64
1/64
5/64
1/64
5/64
1/64
5/64
1/64
4
4
5
5
3
6
3
8
7
8
8
3
7
11
9
11
8
9
11
11
11
11
11
11
11
11
11
11
10
10
10
12
12
10
9
10
12
8
12
11
12
9
The Superblade is available for all machines incl. AURELIA, BALDWIN, CRABTREE, DRENT, GESTETNER, GOEBEL, ITEK, KOBOUDO, MORGAN, NEBIOLO, OLIVER,
PERLE, PLANETA, ROTAPRINT, ROTOMAN, SCHRIBER.
15
WASH-UP BLADES
Part No
Model
Type
HEID47
HEID32
HEID45
HEID50
HEID33
HEID34
HEID38
HEID39
HEID53
HEID40
HEID41
HEID42
HEID43
HEID44
ROLAND01
ROLAND02
ROLAND24
ROLAND03
ROLAND04
ROLAND05
ROLAND06
ROLAND07
ROLAND08
ROLAND09
ROLAND10
ROLAND11
ROLAND12
ROLAND13
ROLAND14
ROLAND15
ROLAND16
ROLAND17
ROLAND18
ROLAND19
ROLAND20
ROLAND21
ROLAND25
ROLAND26
ROLAND22
ROLAND23
ROLAND27
KOMORI33
KOMORI40
KOMORI02
KOMORI22
KOMORI03
KOMORI32
KOMORI04
KOMORI23
KOMORI01
KOMORI05
KOMORI06
KOMORI07
KOMORI08
KOMORI09
KOMORI37
KOMORI10
KOMORI12
KOMORI11
KOMORI13
KOMORI34
KOMORI35
KOMORI14
KOMORI15
KOMORI25
KOMORI17
KOMORI26
KOMORI26
KOMORI27
SORM Z (9 holes/2 slots)
SORS
8 Page Web
16 Page Web
PLATEN 10 x 15
PLATEN 13 x 18
KS
KSB & KSBA
KSD
OHZ
SB & SBG
SBB
SBG Group 11
SBD
Formall/Junior Print
100
100 (With slots)
Favorit RF 01
200 (Pre No 232)
Favorit RF 0B/02/200
300 (Plastic)
Parva RP 1
Parva RP/RZP2
Parva RP2C
Rekord 3
Rekord RVK 3B
Rekord RZK 3B
Rekord RWK 3B
700 (Old)
700 New
Ultra 4 (1st Model)
Ultra 4 (2nd Model)
Ultra V+F29
Ultra V1
Ultra V11 & V11B
Ultra V11 & V11B
700 (007V143930) (Plastic)
700 New version W/slots
800 V/VW
800 V1
900 (07V146730) (Plastic)
C20 Mini Web
8PP Heat Set Web
Sprint 710 (Flexi)
Sprint 710 (Rigid)
Sprint 715 (Flexi) Sprint 715 (Rigid)
Sprint 719 (Flexi)
Sprint 719 (Rigid)
Lithrone 20 Rigid
Lithrone 26 Flexi
Lithrone 26 Rigid
Lithrone 26 AW Narrow
Lithrone 26 AW Wide
Lithrone 28 Flexi
Lithrone 28 Flexi (New style)
Lithrone 28 Rigid
Lithrone 28 AW Plastic
Lithrone 28 AW (Metal)
Lithrone 28 (Spec for UV)
System 38
System 40 (95.35mm H/c)
Lithrone 40 Flexi
Lithrone 40 Rigid
Lithrone 40 AW Plastic
Lithrone 40 AW Plastic
Lithrone 40 AW Plastic
Lithrone 40 AW Plastic
Lithrone 40 AW Plastic
M
M
M
M
C
C
F
F
F
F
F
F
F
F
M
M
M
M
M
M
P
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
P
M
M
M
P
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
P
M
P
M
M
M
M
P
P
P
P
P
(MM) (Inches)
Length Width
Thk
Length
Width
Thk
No Holes
790
1090
570
1036
390
470
530
572
648
720
770
810
835
884
415
705
726
720
785
800
816
900
920
995
1042
1075
1100
1132
1091
1100
1145
1195
1335
1475
1675
1710
1102
1102
1410
1510
1529
590
590
710
710
715
715
719
719
590
726
726
700
710
785
785
785
765
766
790
1022
1060
1094
1094
1076
1076
1076
1076
1076
60
60
51
51
51
51
45.6
45.6
48
45.6
45.6
45.6
50
45.6
60
65
65
65
65
65
60
65
65
65
65
65
65
65
56
56
65
65
65
65
65
65
56
56
65
65
60
48
56
42
42
50
50
44
44
36
36
36
42
47
42
37
37
47
47.5
36
63
64
50
50
47
47
50
50
50
0.5
31 3/32
2 3/8 1/64
0.5
42 29/32
2 3/8 1/64
2.0
22 7/16
2
5/64
2.0
40 25/32
2
5/64
6.0
15 11/32
2
15/64
6.0
18 1/2 2
15/64
1.0
20 7/8 1 51/64
3/64
1.0
22 17/32
1 51/64
3/64
1.0
25 1/2 1 7/8 3/64
1.0
28 11/32
1 51/64
3/64
1.0
30 15/16
1 51/64
3/64
1.0
31 7/8 1 51/64
3/64
1.0
32 7/8 1 31/32
3/64
1.0
34 13/16
1 51/64
3/64
0.5
0.5
27 3/4 2 9/16
1/64
0.5
28 9/16
2 9/16
1/64
0.5
28 3/8 2 9/16
1/64
0.5
30 7/8 2 9/16
1/64
0.5
31 1/2 2 9/16
1/64
1.0
32 1/8 2 3/8 3/64
0.5
35 7/16
2 9/16
1/64
0.5
36 1/4 2 9/16
1/64
0.5
39 3/16
2 9/16
1/64
0.5
41
2 9/16
1/64
0.5
42 5/16
2 9/16
1/64
0.5
43 5/16
2 9/16
1/64
0.5
44 9/16
2 9/16
1/64
0.5
42 15/16
2 3/16
1/64
0.5
43 5/16
2 3/16
1/64
0.5
45 1/16
2 9/16
1/64
0.5
47 1/16
2 9/16
1/64
0.5
52 9/16
2 9/16
1/64
0.5
58 1/16
2 9/16
1/64
0.5
65 15/16
2 9/16
1/64
0.5
67 5/16
2 9/16
1/64
1.0
43 3/8 2 3/16
3/64
0.5
43 3/8 2 3/16
1/64
0.5
55 1/2 2 9/16
1/64
0.5
59 7/16
2 9/16
1/64
1.0
60 3/16
2 3/8 3/64
0.5
23 7/32
1 7/8 1/64
0.5
23 7/32
2 3/16
1/64
0.5
27 15/16
1 21/32
1/64
2.0
27 15/16
1 21/32
5/64
0.5
28 5/32
2
1/64
2.0
28 5/32
2
5/64
0.5
28 5/16
1 3/4 1/64
2.0
28 5/16
1 3/4 5/64
2.0
23 7/32
1 13/32
5/64
0.5
28 19/32
1 13/32
1/64
2.0
28 19/32
1 13/32
5/64
0.5
27 9/16
1 21/32
1/64
0.5
27 15/16
1 27/32
1/64
0.5
30 29/32
1 21/32
1/64
0.5
30 29/32
1 15/32
1/64
2.0
30 29/32
1 15/32
5/64
5.0
30 1/8 1 27/32
3/16
0.5
30 5/32
1 7/8 1/64
5.8
31 3/32
1 13/32
7/32
0.5
40 1/4 2 15/32
1/64
0.5
41 3/4 2 17/32
1/64
0.5
43 1/16
1 31/32
1/64
2.0
43 1/16
1 31/32
5/64
5.0
42 3/8 1 27/32
3/16
5.0
42 3/8 1 27/32
3/16
5.0
42 3/8 1 31/32
3/16
5.0
42 3/8
1 31/32
3/16
5.0
42 3/8 1 31/32
3/16
11
11
8
12
5
6
8
8
8
10
10
10
8
10
5+4
7
9
8
8
8
8
9
10
10
11
11
11
12
13
13
11
11
13
14
16
16
13
13
13
14
16
7
7
6
6
6
6
6
6
5
6
6
10
10
6
6
6
11
11
6
11
11
8
8
8
15
8
8
15
The
Superblade is available for all machines incl. AURELIA, BALDWIN, CRABTREE, DRENT, GESTETNER, GOEBEL, ITEK, KOBOUDO, MORGAN, NEBIOLO,
OLIVER, PERLE, PLANETA, ROTAPRINT, ROTOMAN, SCHRIBER.
16
WASH-UP BLADES
(MM) (Inches)
Part No
Model
Type
Length Width
Thk
Length
Width
Thk
No Holes
KOMORI28
KOMORI18
KOMORI16
KOMORI29
KOMORI24
KOMORI36
KOMORI31
KOMORI30
KOMORI19
KOMORI20
KOMORI39
KOMORI21
KOMORI38
ABDICK01
ABDICK02
ABDICK03
HAMADA01
HAMADA02
HAMADA03
HAMADA04
HAMADA05
HAMADA06
HAMADA07
HAMADA08
HAMADA09
HAMADA10
HAMADA11
HAMADA12
HAMADA13
HAMADA14
HAMADA15
HAMADA16
MITSUBISHI07
MITSUBISHI08
MITSUBISHI01
MITSUBISHI11
MITSUBISHI10
MITSUBISHI03
MITSUBISHI09
MITSUBISHI04
MITSUBISHI06
MITSUBISHI05
MITSUBISHI02
MITSUBISHI13
MITSUBISHI12
RYOBI01
RYOBI21
900087945
RYOBI16
RYOBI03
RYOBI14
RYOBI15
RYOBI17
RYOBI04
RYOBI05
RYOBI06
RYOBI07
RYOBI08
RYOBI20
RYOBI09
RYOBI19
RYOBI10
RYOBI11
RYOBI12
RYOBI18
RYOBI13
Lithrone 40 AW Plastic
Lithrone 40 AW Plastic
Lithrone 40 AW Plastic
Lithrone 40 AW Plastic
Lithrone 40 AW (Teflon)
Lithrone 40 AW (Teflon)
L40 AW (Old 47mm wide)
L40 AW (Old 47mm wide)
Lithrone 40 Coating Unit
Lithrone 44 Plastic
Lithrone 44 Metal/Rubber
Lithrone 50 Plastic
NH Special
320 / 350 / 360
375
9810
61/62 Colour Head
55/65 Colour Head
500 2nd Head/600 (Pt No 106-11-6)
611/612 Main Blade
700 CDXNP (Pt No 4203-07003)
E47-2 Group 11
700 CDX Main Head (Rubber)
C 248 ESF
800 Coding Mag
800 CDX
Beta 52
Alfa 52
RS 34 L11
E47-2 (Special)
700 CDX Main Head (Plastic)
885 CDX (2nd Ancillary Unit)
1E & 1F
1E Teflon (Special)
1F Court
3D 3D Teflon
3E 3E Teflon
3F
3F
3F Teflon
3F Teflon
4E 4E Teflon
2700/2800
2700/2800 (Plastic)
3200 & 3302M (Old)
3200 & 3302M Old (Plastic)
3200 PFA
3302
3302M New (Plastic)
3304H (Teflon)
4502
480N/500N
480K/480D/500K
500 KNP Number. Unit
512
512 (Plastic)
520/522 (Rubber)
520/522 (Plastic)
520/522 (Teflon for UV)
522 Numbering Unit
530/560
640K
662 PFH
P
P
P
P
P
P
M
M
M
P
M
P
M
R
RE
R
M
M
RE
RE
M
RE
RE
M
RE
RE
M
RE
M
M
P
M
M
P
M
P
P
P
P
P
M
P
P
P
P
RE
P
RE
P
RE
RE
P
P
RE
RE
RE
M
RE
P
RE
P
P
M
RE
RE
RE
1094
1094
1094
1094
1094
1094
1076
1110
1050
1190
1190
1379
719
300
340
340
315
321
322
336
480
490
484
514
528
536
540
558
355
483
484
540
785
785
792
1110
1110
1080
1085
1080
1090
1080
1090
1190
1190
305
305
355
354
354
360
286
734
453
507
508
510
557
557
572
572
572
522
602
745
760
47
47
50
50
47
50
47
47
51
50
50
42
50
22
50.8
57
37
40
46
45
49
47
46
45
40
49
49
45
42
35
46
40
40
40
33
44
44
43
55
31
40
35
45
44.5
44.5
40
40
40
40
28
40
44
25
41
45
45
42
28
28
24.5
24.5
24.5
42
39
47
40
5.0
43 1/16
1 27/32
3/16
5.0
43 1/16
1 27/32
3/16
5.0
43 1/16
1 31/32
3/16
5.0
43 1/16
1 31/32
3/16
5.0
43 1/16
1 27/32
3/16
5.0
43 1/16
1 31/32
3/16
0.5
42 3/8 1 27/32
1/64
0.5
43 11/16
1 27/32
1/64
0.5
41 11/32
2
1/64
5.0
46 27/32
1 31/32
3/16
0.5
46 27/32
1 31/32
1/64
5.0
54 9/32
1 21/32
3/16
0.5
28 5/16
1 31/32
1/64
3.0
5.0
5.0
0.5
12 13/32
1 15/32
1/64
0.5
12 5/8 1 9/16
1/64
5.0
12 11/16
1 13/16
3/16
5.0
13 7/32
1 25/32
3/16
0.5
18 29/32
1 15/16
1/64
5.0
19 9/32
1 27/32
3/16
5.0
19 1/16
1 13/16
3/16
0.5
20 1/4 1 25/32
1/64
5.0
20 25/32
1 9/16
3/16
5.0
21 3/32
1 15/16
3/16
0.5
21 1/4 1 15/16
1/64
5.0
21 31/32
1 25/32
3/16
0.5
13 31/32
1 21/32
1/64
0.5
19
1 3/8 1/64
5.0
19 1/16
1 13/16
3/16
0.5
21 1/4 1 9/16
1/64
0.5
30 29/32
1 9/16
1/64
1.5
30 29/32
1 9/16
1/16
0.5
31 3/16
1 5/16
1/64
2.4
43 11/16
1 3/4 3/32
2.4
43 11/16
1 3/4 3/32
2.0
42 17/32
1 11/16
5/64
2.0
42 23/32
2 5/32
5/64
2.0
42 17/32
1 7/32
5/64
0.5
42 29/32
1 9/16
1/64
5.0
42 17/32
1 3/8 3/16
2.0
42 29/32
1 25/32
5/64
2.0
46 27/32
1 3/4 5/64
2.0
46 27/32
1 3/4 5/64
5.0
12
1 9/16
3/16
5.0
12
1 9/16
3/16
5.0
14
1 9/16
3/16
5.0
13 15/16
1 9/16
3/16
5.0
13 15/16
1 3/32
3/16
5.0
14 3/16
1 9/16
3/16
4.0
11 1/4 1 3/4 5/32
2.0
28 7/8 1
5/64
5.0
17 7/8 1 5/8 3/16
5.0
19 15/16
1 25/32
3/16
5.0
20
1 25/32
3/16
0.5
20 1/16
1 21/32
1/64
5.0
21 15/16
1 3/32
3/16
5.0
21 15/16
1 3/32
3/16
5.0
22 1/2 31/32
3/16
5.0
22 1/2 31/32
3/16
5.0
22 1/2 31/32
3/16
0.5
20 9/16
1 21/32
1/64
5.0
23 11/16
1 27/32
3/16
5.0
29 5/16
1 27/32
3/16
5.0
29 15/16
1 9/16
3/16
8
15
8
15
15
15
15
15
9
9
9
19
8
0
6
6
8
9
9
9
13
13
13
14
14
14
14
9
5
13
13
14
8
8
9
11
11
11
11
11
11
11
11
13
13
6
6
6
6
6
6
4
13
6
9
11
11
9
9
9
9
9
11
13
16
11
The Superblade is available for all machines incl. AURELIA, BALDWIN, CRABTREE, DRENT, GESTETNER, GOEBEL, ITEK, KOBOUDO, MORGAN, NEBIOLO,
OLIVER, PERLE, PLANETA, ROTAPRINT, ROTOMAN, SCHRIBER.
17
CYLINDER JACKETS
CYLINDER
PRESS
MODEL
PART #
STEEL SIZE (cm)SIZE (cm)
THICKNESS WIDTH LENGTH
HEIDELBERG
PRINTMASTER 46
GTO 46
GTO/Printmaster 52
SM 52
MO 65
SM 72
SM 74
SM 102
KOR
KORA 57
KORD 62
KORD 64
KORS 72
900088214
900088215
900088216
900088217
900088218
900088219
900088220
900088221
900088222
900088223
900088224
900088225
900088226
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.6
0.6
0.6
0.6
0.6
36
32
36
36
48
52
52
72
40
46
46
46
52
46
46
52
52
65
72
74
102
57
57
62
64
72
KS
KSB
KSBA
KSBAZ
KSD
S (OHZ)
SB-SBG
SBG
SBB
SBD
SBD (SPECIAL)
900088227
900088228
900088229
900088230
900088231
900088232
900088233
900088234
900088235
900088236
900088237
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
38
40
46
46
46
54
56
54
57
64
64
52
57
58.5
57
64
72
77
77
82
90
89
SGS
900088238
0.6 71 104
JACKETS
PRESS
MODEL
ROLAND FUJI- SHINOHARA
SAKURAI
ROTAPRINT
HAMADA
KOMORI
DAVIDSON
TOKO
HASHIMOTO
PRACTICA 00
PRACTICA 00 (NEW)
PRACTICA 00 2COL
PRACTICA 01
RFOB
REKORD
FUJI-52
FUJI-66
FUJI-75
OLIVER 6
OLIVER 52
OLIVER 58-258
OLIVER 66
OLIVER 72
R 37 KV
ALFA 52
ALFA 66
SPRINT 26
SPRINT 28
501
701
TOKO
521
PART #
900088243
900088244
900088245
900088246
900088247
900088248
900088249
900088250
900088251
900088252
900088253
900088254
900088255
900088256
900088257
900088258
900088259
900088260
900088261
900088262
900088263
900088264
900088265
STEEL SIZE (cm)SIZE (cm)
THICKNESS WIDTH LENGTH
0.3
36
0.3
36
0.3
36
0.3
48
0.3
52
0.3
72
0.3
36
0.3
48
0.3 58 0.3
32
0.3
36
0.3
44
0.3
46
0.3
52
0.3
35
0.3
36
0.3
45
0.3
46
0.3
52
0.3
0.3
0.3
0.3
52
52
52
66
72
103
52
66
75
48
52
58
66
72
50
52
66
68
72
18
RECIRCULATION FILTERS
Part #: 900087273For Royse systems. Also widely used on all types of
Heidelberg, Komori and Roland presses where a hose can
easily be fitted to return-flow.
Part #: 900088138
For Master Flow systems. Also used on some Royse systems.
27
5m
m
3/4
”
10
215mm
19
”
17
43
0m
m
165mm
6 1/2”
7
0m
1/
2”
m
8 1/2”
Part #: 900088139 Part #: 900088140
For Technotrans systems (old style)
For Technotrans systems (new style)
8”
255mm
12”
10”
Part #: 900088291
205mm
240mm
9 1/2”
305mm
Part #: 900088292Predominantly used on Technotrans Alpha D circulation systems fitted to Heidelberg, Komori, Roland and various
other presses. Can also be used on Baldwin units which
have similar neck fitting.
m
4”
3/
/4”
91
225mm
8 3/4”
Part #: 900088294
Part #:900088293
8”
320mm
18”
12 1/2”
205mm
12 3/4”
325mm
460mm
215mm
8 1/2”
11
0m
30
m
5m
23
19
RECIRCULATION FILTERS
Part #: 900088295
Part #: 90088296
6 7/8”
175mm
255mm
10 1/8”
570mm
310mm
22 1/2”
12 1/8”
Part #: 900088298
Part #: 900088297
6”
m
5m
15
5”
125mm
m
5m
49
410mm
19
”
1/2
16”
Part #: 900088299
Part #: 900088301
Part #: 900088300
9 1/4”
2
8”
5/
19 3/4”
300mm
11 3/4”
Fountain Clean Filters: The most commonly used filter on many presses, this 10 micron
cartridge filter is available with 1/2”, 3/4” and 1” tube connectors. Available singly or in
sets pre-connected with “Y” connectors to double the filtration capacity.
Part #: 900087505 - 1/2” connector (single)
Part #: 900087506 - 1/2” w/ Y connector
Part #: 900087507 - 3/4” w/ Y connector
Part #” 900087508 - 1” w/ Y connector
m
m
65
235mm
14 1/2”
370mm
500mm
mm
8”
8 1/
210
Ink Eliminator - Removes emulsified ink!
A durable nylon-mesh bag filled with ink
absorbent material which effectively prevents
contamination of the dampening system.
Simply place the Eliminator in the circulation
tank and it will float on the surface of the fountain
solution removing all emulsified ink.
Size: 200x115x25mm (8”x4.5”x1”)
Packing: 8 pieces per box
Part #: 900088309
20
PLATE CORRECTION PENS
Part #: 900000032
Part #: 900000031
Part #: 900012084
DELETION PENS
Part #
900000032
900000031
900012084
900012093
900040594
Description
Plate Deletion Pen/Medium Point
Plate Deletion Pen/Bold Point
Thermal Deletion Pen/Medium Point
Thermal Deletion Pen/Extra Large
Silvermaster Deletion Pens/OEIII Packing
Each
Each
Each
Each
Package of 3
ADDITION PENS
Part #: 900040594
Part #
Description
Packing
900012035
Addition Pen/Fine Point
Each
900000030
Addition Pen/Medium Point
Each
Part #: 900012035
PLATE
CORRECTION
Part #: 900087955
Part #: 900087954
GELS
• Easy to apply no bleeding of the fluid
• Precise correction/deletion possible
• Will not attack the oxide surface of the plate
• Removes all coating residues from the plate pores
• Very low odor
• Stirring gel a few times with brush will increase thickness of gel
• Mainly used in the plate room for plate correction
• Quick and easy to apply with thin brush
• Precise correction/deletion possible
Thick positive deletion gel
Thin positive deletion fluid
Packing:100g (3.53 oz)/bottle
Packing:100g (3.53 oz)/bottle
• Will not attack the oxide surface of the plate
• Removes all coating residues from the plate pores
• Very low odor
WASH-UP
BOTTLE
Wash-up bottle - 1 liter/32 oz
Part #: 900087949
• Wide neck for easy spill free filling
• One piece leak-free cap that maintains it’s shape when in use
• Precision jet-tip neck for fine control
• Easy-to-read ascending scale in both ml and oz. - printed
and engraved
• Caps available in 4 different colors for easy identification of
contents
21
ROLLER L U B E /C L E A N ER
L U B R I C AT E S A N D C L E A N S !
Part #: 90087800
Fuji’s Signature Idle Unit Lube/Cleaner is an exceptional product
that has taken the graphics industry by storm. Formulated to prevent
friction burn-up of ink rollers on idle printing units during printing, it
also gently deep cleans and rejuvenates the rollers!
• Cleans off quick and easy at the end of the shift and contrary to
other products on the market it has a very pleasant fragrance.
• Does not harm plates or blankets and works with both
conventional and UV ink.
Instant benefits:
• Lubricates AND deep cleans inking rollers
• Will not harm plates or blankets
• Quick and easy to clean off at end of shift
• Pleasant fragrance during use
• Works with conventional and UV ink
• Non-caustic
• Non-toxic
• Non-flammable
Packing: 950 grams (2.1 lbs)/can • Sold as single tubs • 12 tubs/case
D E E P C L E A N R O L L E R PA S T E
R O L L E R C L E A N I N G PA S T E
FOR QUICK COLOR CHANGES
Fuji’s Deep Clean Roller Paste is an invaluable aid for roller
Part #: 90087799
cleaning. In one step it permits quick, effortless color changes
and at the same time protects and deep cleans rubber roller by
removing ink, glaze and calcium deposits.
Deep Clean Roller Paste conditions the surface with a unique
additive: Super-M. This compound replaces plasticizers leachedout during regular wash-ups. Regular use prolongs roller life.
Distributes easily over the rollers and is stable in a wide range of
temperatures.
Instant benefits:
• Permits quick color changes
• Deep cleans rollers
• Removes ink, glaze and calcium deposits
• Replaces plasticizers in rubber
• Prolongs life of rollers
• Distributes easily over the rollers
• Stable in a wide range of temperatures
Packing: 1 kilo (2.2 lbs)/can • Sold as single tubs • 12 tubs/case
“
THE FUJIFILM GREEN POLICY
We at Fujifilm believe that “sustainable development”
of the Earth, mankind, and companies in the 21st century
is an issue that must be addressed with the highest
priority. As a socially responsible corporation, we actively
undertake corporate activities with our environmental
values in mind. We strive to be a dedicated steward of
the environment and assist our customers and corporate
partners in doing the same.
FUJIFILM North America Corporation, Graphic Systems Division | Phone: 800.877.0555 | Email: contact@fujifilmgs.com | Web: www.fujifilmgs.com