Jyotirmoy Dutta

advertisement
Jyotirmoy Dutta



ACADEMIC CREDENTIALS
Ph.D. (pursuing), Electrical Engineering
Shiv Nadar University, Greater Noida, Uttar Pradesh, India
Thesis: Design and Development of Film Bulk Acoustic Resonator based Radio Frequency filter
for 2.6 GHz band applications (Thesis not submitted)
Advisors: Dr. Atul Vir Singh and Dr. Sonal Singhal
M. Engg., Electronics and Communication Engineering
National Institute of Technical Teachers’ Training and Research, Panjab University, Chandigarh, India
Thesis: Development and Application of the Finite Difference Time domain Method in Antenna
analysis
Advisor: Prof. S.S.Pattnaik
B. Tech., Electronics and Communication Engineering
Himachal Pradesh University, Shimla, India
WORK EXPERIENCE







(2012-2016)
Shiv Nadar University, Greater Noida, Uttar Pradesh, India
Teaching Assistant in the Department of Electrical Engineering in the School of Engineering
(2010-2012)
Gurukul Kangri Vishwavidyalaya, Haridwar, Uttarakhand, India
Assistant Professor of Electronics and Communication Engineering at the Faculty of Engineering
and Technology
(2005-2010)
Himachal Pradesh University, Shimla, Himachal Pradesh, India
Assistant Professor in Electronics and Communication Engineering at University Institute Of
Information Technology
TECHNICAL SKILLS
Coventorware MEMS design tool
Application Software:
 Well versed with the design and simulation of MEMS devices including defining process flows,
mask design, inferring from simulation results and post processing design optimization.
MATLAB
Programming Languages:
Familiar with ADS, SPICE, COMSOL Multiphysics and Verilog
While executing part of my Ph.D. research work at the National Nano Fabrication Facility at the Indian
Institute of Science, Bangalore under Indian Nano-electronics Users Program (INUP), I got basic
exposure of CLASS 100 clean room facility and got familiarized with following processes
 Semiconductor processing : RF/DC sputtering, Thermal Evaporation, Wet etching, Dry etching,
Optical Lithography
 Material characterization: XRD, Ellipsometer, Surface profilometer
 Electrical Characterization: RF probe station
RECENT TRAININGS/WORKSHOPS ATTENDED




Intensive training on COMSOL Multiphysics conducted by COMSOL India at New Delhi (March 2016)
Workshop on – ‘MEMS prototyping, RF MEMS Fabrication, Design and Modeling’- conducted by IEEE
EDS at Indian Institute of Technology, Roorkee, India (May 2015)
Hands on Training at Centre for Nano Science and Engineering, Indian Institute of Science, Bangalore in
MEMS (December 2014)
Familiarization Workshop at Centre for Nano Science and Engineering, Indian Institute of Science,
Bangalore on Nanofabrication Technologies (May 2014)
Page 1 of 2



ACHIEVEMENTS
Research Fellowship and full fee waive off from Shiv Nadar Foundation for pursuing Doctoral Program
Qualified University Grants Commission-National Eligibility Test (UGC-NET) in Electronics Science
National Scholarship for securing high position in Senior Secondary School level
ANNEXURE-I
PUBLICATIONS








JOURNAL
Jyotirmoy Dutta, Atul Vir Singh, Sonal Singhal and Madhur Deo Upadhyay “Design and Simulation of a
Zinc Oxide Thin Film Bulk Acoustic Resonator Filter for 2.6 GHz Band Applications", IETE Journal of
Research in June 2015 (SCIE Indexed Journal)
Jyotirmoy Dutta, Atul Vir Singh, Sonal Singhal, and Madhur Deo Upadhyay, “Effect of TFBAR size on
bandpass filter performance for 2.6 GHz band applications”, communicated to IETE Journal of Research
in March 2016
Jyotirmoy Dutta, Atul Vir Singh, Sonal Singhal, and Madhur Deo Upadhyay, “Design and Simulation of a
TFBAR bandpass filter with Polyimide reflector”, communicated to International journal of Electronics
,June 2016
CONFERENCE
Jyotirmoy Dutta, Atul Vir Singh, Sonal Singhal, and Madhur Deo Upadhyay, “A study on the Effect of
Electrode thickness on a ZnO Thin Film Bulk Acoustic Resonator”, communicated to Asia Pacific
Microwave Conference to be held in December 2016 in New Delhi
Jyotirmoy Dutta, Atul Vir Singh, Sonal Singhal and Madhur Deo Upadhayay, “Design and Simulation of a
Film Bulk Acoustic Resonator based RF filter for Broadband PCS system”, presented at the International
Conference on MEMS and Sensors (ICMEMSS-2014) at the Indian Institute of Technology, Madras, India,
December2014
Jyotirmoy Dutta, Atul Vir Singh, Sonal Singhal and Madhur Deo Upadhyay, "MBVD Equivalent Model of a
ZnO/Al Based Film Bulk Acoustic Resonator for Microwave Filter Applications”, presented at 7th
International Conference on Smart Material Structures and Systems at Indian Institute of Science,
Bangalore, India, July 2014
Jyotirmoy Dutta, Atul Vir Singh and Sonal Singhal "Study on design and simulation of zinc oxide based
film bulk acoustic resonator for RF filters", (published as a book chapter by Springer in Physics of
Semiconductor Devices) at the 17th International Workshop on the Physics of Semiconductor Devices, at
AMITY University Noida, India, December 2013
COURSE BOOK
Course book for Digital Electronics for BCA students of International Centre for Distance Education and
Open Learning of Himachal Pradesh University
Page 2 of 2
Download