G-Beam Series GB34RC2-ASY-LOUVER
General Illumination - Recessed in Grid or Hard Ceiling
Asymmetric Direct Distribution
Click or scan QR code to view
latest spec sheet
Click photo to view product page
Page 1:
Page 2:
Page 3:
Page 4:
Page 5:
Overview & Nomenclature
Specifications
Photometric Info / Downloads
Mounting Details
Standard Colors / Finishes
Revision Date: April 27, 2015
Gammalux Lighting Systems reserves
the right to change details of fixture
designs and construction at any time.
Product Overview (for complete specifications, see page 2)
Construction: Extruded aluminum housing is available in one piece up to 24' and can be mounted in nearly any ceiling condition. Grid
mounted fixtures can be installed from below. Continuous runs have hairline joints with no light leak. Runs of fixtures can be built to
match field conditions, including patterns.
Electrical: Fixtures can be fitted with integral sensors and control interface devices (consult factory). Multiple dimming options
available. Runs of fixtures are tested as a complete system prior to shipping.
Optical: Semi-specular aluminum reflector and parabolic blade baffle are oriented to provide asymmetric distribution.
Finish: High quality paint finish in high gloss or semi-gloss. Custom colors available.
Packing and Shipping: Our packing, labeling and shipping systems ensure products arrive safely, ready to install.
Standard Nomenclature
248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275
Fax 909.599.5288 E-mail: info@gammalux.com
Gammalux products comply with ARRA Buy American requirements
1
G-Beam Series GB34RC2-ASY-LOUVER
General Illumination - Recessed in Grid or Hard Ceiling
Asymmetric Direct Distribution
Specifications
Construction
Housing: Extruded aluminum body 3.00" wide x 3.78" high, 6063T5, 0.070" min thickness. In continuous runs, each housing is 12'
max unless previously coordinated with the factory, up to 24' in a single piece. All fixtures are built per approved factory drawings and
tested as a complete system at the factory. Fixtures ordered as individuals cannot be joined together in the field.
Joiner System: Automatic alignment, no loose parts, one tool to tighten two factory installed bolts for hairline seam. No light leaks.
Lamping: Lamps are set inline, non-staggered. Factory-engineered drawings indicate the location of each lamp in continuous runs.
Mounting: Recessed into a ceiling system (REC). Grid mounted fixtures can be installed from below. Consult factory for in-wall
installation.
Electrical
Static Ballast*: Osram Sylvania or equal Electronic Rapid Start with less than 10% Total Harmonic Distortion is default (ERS).
0-10V Dimming*: 0-10v dimming by Advance Mark 7 is default (ZTVF).
Line Voltage Dimming*: Two-wire line voltage dimming by Advance Mark 10 is default (TWR).
DALI Dimming: Dimming by generic DALI ballast (DALI).
Lutron Dimming: Dimming by Lutron EcoSystem, wired for EcoSystem control (ECDE). Dimming by Lutron EcoSystem, wired for 3Wire control (ECD3). Dimming by Lutron EcoSystem H Series (ECH). Dimming by Lutron Hi-Lume 3D, wired for EcoSystem control
(H3DE). Dimming by Lutron Hi-Lume 3D, wired for 3-Wire control (H3D3).
Step Dimming: Step Dimming availability is contingent upon multiple factors. Consult factory (SDIM).
On-board sensors and control interface devices may be specified (consult factory). Max ballast cross section size 1.0" x 1.2". Fixtures
bear UL & cUL Dry Location label. Damp Location label available (DL).
*Subject to availability. May be substituted by Gammalux. Components and specifications may be changed without notice.
Optical Performance
Reflectors: Shall be asymmetric formed diffuse high reflectance aluminum.
Parabolic Blade Baffle: Snap-in. Shall be 3/4” high, semi specular aluminum parabolic blade baffle (specify PBB).
Finish
Housing assembly is electrostatically sprayed with high solids aliphatic two component polyurethane to an average thickness of 2 mils.
over acid etching primer. High gloss or semi-gloss are standard. Specify H for high gloss in Paint Finish field. Specify SG for semigloss. Consult with factory for other finishes.
Packing and Shipping
Fixtures built for continuous rows and patterns are given a specific location identifier, clearly identified on factory layout drawings
provided to installing contractor. Location identifier is printed on the fixture's ID Label, protective wrapping and on each end of fixture
carton. Shipping pallets are built with 2" clearance, extending beyond the length and width of cartons, providing shipping protection.
Approx. weight of 4' module is 13 lbs. including carton. Weight of pallet and supplemental packing materials not factored in.
248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275
Fax 909.599.5288 E-mail: info@gammalux.com
Gammalux products comply with ARRA Buy American requirements
2
G-Beam Series GB34RC2-ASY-LOUVER
General Illumination - Recessed in Grid or Hard Ceiling
Asymmetric Direct Distribution
Photometric Info / Downloads
248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275
Fax 909.599.5288 E-mail: info@gammalux.com
Gammalux products comply with ARRA Buy American requirements
3
G-Beam Series GB34RC2-ASY-LOUVER
General Illumination - Recessed in Grid or Hard Ceiling
Asymmetric Direct Distribution
Mounting Details
Factory Drawings: Fully dimensioned factory drawings will be provided upon receipt of purchase order.
Gammalux Lighting Systems reserves the right to change the details of fixture design and construction at any time.
248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275
Fax 909.599.5288 E-mail: info@gammalux.com
Gammalux products comply with ARRA Buy American requirements
4
G-Beam Series GB34RC2-ASY-LOUVER
General Illumination - Recessed in Grid or Hard Ceiling
Asymmetric Direct Distribution
Standard Colors/Finishes
Due to variances in computer monitors and color printers, this page should be used for general reference only.
For a sheet of physical color samples, please consult factory.
High Gloss Finish
White (WH)
Red (RD)
Blue (BH)
Black (BKH)
Yellow (YH)
Green (GH)
OffWhite (OWSG)
Semi Gloss Finish
White (WSG)
Silver (SSG)
Gray (GYSG)
LightGray (LGYSG)
Bronze (BZSG)
SatinAluminum (SAPSG)
Due to variances in computer monitors and color printers, this page should be used for general reference only.
For a sheet of physical color samples, please consult factory.
248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 | 800.356.3275
Fax 909.599.5288 E-mail: info@gammalux.com
Gammalux products comply with ARRA Buy American requirements
5