Rockford Products, Inc. is the up and coming answer to Quality,
Engineering and development of Lites, Louvers and Door
Components. Our commitment to service at a competitive
price is second to none. Our modern manufacturing facility in
Orchard Park, New York is uniquely equipped to fabricate not
only standard products but also an array of custom sizes and
shapes with incredible timeliness.When you deal with
Rockford, you are dealing with a company dedicated to getting
the job done right, on time, and with quality material.
LPK Square Series
Low Profile- 90 degree Lite Kit
Standard Product Features:
• 18 gauge rust resistant galvaneal steel
• Mitered and welded clean corners
• Finish to be grey primer, beige or duranodic
• 90 degree square glass stop
• No. 8 x 1 3/4" flat head sheet metal screw
• For use on 1 3/4" doors
• Minimum width 1"- maximum height 69"
• Countersunk mounting holes for flush appearance
• Installs without drilling holes through door for
quick installation (LPK-30 only)
• LPK-30 (For use with 1/4" up to 7/8" glass)
fastened with sheet metal screws one side
• LPK-70 (For use with 3/4" up to 1" glass)
thru bolted
(LPK-30)
BLK Series
Standard 1/4" profile- Beveled Lite Kit
Standard Product Features:
• 18 gauge rust resistant galvaneal Steel
• Mitered and welded clean corners
• Finish to be grey primer, beige or duranodic
• 15 degree beveled glass stops
• No. 8 x 2" flat head sheet metal screw
• For use on 1 3/4" doors
• BLK-20 (For use with 1/4" up to 5/8" glass)
• Minimum width 1"- maximum height 70"
• Countersunk mounting holes for flush appearance
• Installs without drilling holes through door for
quick installation
(LPK-70)
SLK Series
Standard 1/4" profile- 90 degree Lite Kit
Standard Product Features:
• 18 gauge rust resistant galvaneal steel
• Mitered and welded clean corners
• Finish to be grey primer, beige or duranodic
• 90 degree square glass stop
• For use on 1 3/4" doors
• Minimum width 1"- maximum height 70"
• Countersunk mounting holes for flush appearance
• Installs without drilling holes through door for
quick installation (SLK-30 only)
• SLK-30 (For use with 1/4" up to 7/8" glass)
fastened with sheet metal screws one side
• SLK-50 (For use with 1/4" up to 1" glass)
fastened with Thrubolts
(BLK-20)
LPK Beveled Series
Low Profile- Beveled Lite Kit
Standard Product Features:
• 18 gauge rust resistant galvaneal steel
• Mitered and welded clean corners
• Finish to be grey primer, beige or duranodic
• 15 degree beveled glass stops
• No. 8 x 1 3/4" flat head sheet metal screw
• For use on 1 3/4" doors
• Minimum width 1"- maximum height 69"
• Countersunk mounting holes for flush appearance
• Installs without drilling holes through door for
quick installation
• LPK-20 (For use with 1/4" up to 5/8" glass)
fastened with sheet metal screws one side
• LPK-60 (For use with 3/4" up to 1" glass)
thru bolted
(LPK-20)
(LPK-60)
(SLK-30)
Optional Features for all series:
(SLK-50)
• 304 No. 4 stainless steel finish in 18ga material
• Special finishes- Powder Coat
(Consult factory for matching of paint chip samples)
• Security Fasteners, Security Grilles, Screens
• Glazing tape available
• Custom designs- (Christian Cross, Hexagon and
Octagon, consult factory)
• Custom glass sizes available for all models
Rockford has quickly become a leader in providing quality custom
grilles and French door vision frames in record time. All grilles are
made from 16ga cold rolled steel welded and ground smooth. Grilles
are available in 3/4" x 3/4" or 1/2" x 1/2" square steel tube for the
SLK-30 or LPK-30 profiles
Vision Frames
Galvaneal steel for long life
Standard Product Features:
• The vision frame comes in 18ga. - cold rolled steel
tubing 3/4" x 3/4", 1/2" x1/2" or 3/8" x 3/8"
• Finish to be grey primer, beige or duranodic
• Door thickness to be 1 3/4" only
• Order size is exposed glass area
Rockford also knows how
important it is to think of the
entire door opening. By
manufacturing Sidelite grilles
to match the doors vision
lite, Rockford has come up
with the complete package.
All grilles are made from 16ga
cold rolled steel ready for any
one of our standard three
finishes as well as custom
finishes. Grilles are available in
1/2" x 1/2" or 3/4" x 3/4"
square steel tube and are
stopped in place on site.
Sidelite frames
Low Profile- 90 degree Lite Kit
Standard Product Features:
• Mullions are fabricated in 16ga.- 1/2" x 1/2" cold
rolled steel tube
• Finish to be grey primer, beige or duranodic
• Door thickness to be 1 3/4" only
• Framed Mullions- Order size is net opening
size less 1/4"
Optional features:
• Special- create your own grill pattern
• Finish- special finish per paint chip sample provided
• 3/4" x 3/4" Mullions optional
• Available for 1" glass (3/8”x3/8” tube)
Special Order Lite Kits:
Optional features:
• Special security screws available
• Special- create your own grill pattern
• Finish- special finish per paint chip sample provided
• Available in galvanized steel
We fabricate an array of custom sizes and shapes
• All lite kits are available in 304 - #4 stainless
steel finish
• Polished stainless mirror finish (US30) BHMA 629
• Custom wood veneer - wrapped and maintain
fire label (available in birch, white oak & red oak)
• Security Grilles
• Screen
• Glazing tape available
• Custom designs- (Christian Cross, Hexagon., etc.)
• Over 84 custom powder coated finishes
available (sample chip must accompany order)
• Aluminum kits - extruded aluminum kits with
rubber gasketing ready for glass
• Custom glass sizes available for all models
Rockford Products Inc.
3345 N. Benzing Road
Orchard Park, NY 14127
Phone: 716-823-3145
Fax: 716-823-7232
G-2
G-3
G-4
G-6
G-5
G-8
G-9
G-10
G-12
G-15
Toll Free: 877-384-1830
Rockfords top selling louver provides 80% free airflow while
fastening to one side to ensure security.The RLV-60 was
designed to mount centered in a 1 3/4" wood or metal
door. Our 20-gauge inverted "Y" blades add stiffness and a
burr free exposed edge.The 18-gauge galvaneal mitered
frame secures the grill assembly in place giving it a rugged,
clean appearance to match our SLK Series glass frames.
Special Order Louvers:
We fabricate an array of custom sizes and shapes
• All louvers are available in 304 - #4 stainless
steel finish
• Polished stainless mirror finish (US30) BHMA 629
• Security Grilles (one side)
• Screens
• Over 84 custom powder coated finishes available
(sample chip must accompany order)
• Aluminum kits - extruded aluminum kits
with rubber gasketing ready for glass
• Louver cores only for transomes and sidelites
• Available for 1 3/8" up to 2 1/4" doors
for RLV series only
The FLV Adjustable Louver is UL Listed and fire rated up to
90 min. for use on 1 3/4" doors.The fusible link overrides
the manual operator when activated by heat, giving you a
fire rated assembly.The louver is constructed of 16-gauge
galvaneal steel and carries the same aesthetic and structural
qualities as the RLV Series as stated above.
Rockford Products Inc.
3345 N. Benzing Road
Orchard Park, NY 14127
RLV-60 Series
Phone: 716-823-3145
Fax: 716-823-7232
Rockfords standard louver assembly
Standard Product Features:
• 18 gauge rust resistant galvaneal steel frame
• 20 gauge galvaneal inverted "Y" blades
• Welded corner construction
• Finish to be grey primer, beige or duranodic
• No. 8 x 2" flat head sheet metal screw
• For use on 1 3/4" wood or hollow metal doors
• Maximum height 70"
• Installs without drilling holes through door
for quick installation
Toll Free: 877-384-1830
FLV-Series
Astragals
Rockfords fire rated louver assembly
Standard Product Features:
• 18 gauge rust resistant galvaneal steel frame
• 16 gauge galvaneal adjustable "Z" blades
• Welded corner construction
• Finish to be grey primer, beige or duranodic
• No. 8 x 3/4" oval head sheet metal screw
• For use on 1 3/4" wood or hollow metal doors
• Maximum size 24" x 24"
Rockford has the answer to your door edge needs
• Flat astragals (Made of 10 gauge cold rolled steel)
• "Z" astragals (galvaneal steel)
• Edge Guards (galvaneal steel)
Rockford has a full range of astragals and edge
guards to meet your door edge needs.Whether
you're looking to protect your leading edge or
tighten up standard clearances, Rockford has the
answer. All astragals will work on a standard 1 3/4"
wood, hollow metal or face composite doors.
Standard hardware cut outs are available on all in
stock astragals.
Optional Features for all series:
• Stainless Steel 304 -#4 finish
• Custom hardware cut-out
(Template and location required)
• Aluminum Edge Guards (extruded aluminum)
• Over 84 custom powder coated finishes
available (sample chip must accompany order)
Rockford Products, Inc. started off in the door component business some 15 years
ago.The founder, Mr. Paul Rowell, has over forty years of experience in the hollow
metal and wood door installation business.This knowledge has helped Rockford to
develop the ideas and specifications in fabricating quality door component parts.We at
Rockford have the answer to all your door component needs.The following list will
give you an idea of what we are capable of but does not show it all. Please feel free to
call as at Rockford to meet your fabrication needs.The end product at Rockford is a
quality part at a competitive price…
Door Components
Quality parts at a competitive price
Rockford Products:
• Filler Plates
• Weld in tabs
• Hinge mortar boxes
• Reinforcements and shims
• Continuous hinge shims
• Weld-in corner tabs
• Closer reinforcements
• Door stiffener and latch stabilizers
• Glazing bead and stop extensions
• Door channel and door frame caps
• Anchor and sill stiffener
• Strike adapters
• Flush bolt strikes and reinforcements
• Door face fillers
• Latch Guards
• ASA strikes
• Frame spats
• Stainless Steel corner guards
• Stainless Steel hollow metal and wood
door repair kits
• Security locking bars
• Flat astragals
• "Z" astragals
• Edge guards and astragals for wood and
plastic face doors
• Glazing tape
• Reinforcement pivots
• Lite kit and louver touch up paint
3345 N. Benzing Road • Orchard Park, NY 14127
Phone: 716-823-3145 • Fax: 716-823-7232
Toll Free: 877-384-1830