NHID-4 Series 4" HID Metal Halide Housing with Adjustable Trim

advertisement
NHP-4P20
NHID-4 Series
4" HID Metal Halide Housing
with Adjustable Trim
Type
Project
Catalog No.
Lamp: 20-39W GX10
Lamp/Wattage
PRODUCT DESCRIPTION
Four-inch aperture NHP-4P20
vertical HID downlight designed for use with CMH 20W GX10/MR16 metal
halide lamp. Equipped with electronic ballast and thermal protector. Access above ceiling
required.
DIMENSIONS
CONSTRUCTION
Housing and Plaster Frame
Plaster plate is steel construction with two universal mounting brackets that adjust 3-1/8"
vertically, and 3-7/8" horizontally. Universal brackets accept flat bar hangers, C-Channel or
1/2" EMT conduit pipe. Also with fingers on all sides to hold flat bar hangers. Accommodates
up to 5/8" ceiling thickness.
7-1/8"
6-3/8"
Socket
4KV pulse rate 600V, porcelain GX10 socket mounted on stationary yoke, and supplied with
trim. Eight inch lead with molex connects trim to housing.
7-1/8"
6-3/8"
Lamp
One GX10.
Ballast - Universal (120-277V)
120V- 277V, 50/60Hz electronic ballast thermally protected and end of life protection.
Rating
Input Watts
Operating Temp
THD
Sound
Starting Temp
4-1/2"
20W 0.175A / 0.0758A
75˚C (Max)
<15%
>50,000
5˚Ceiling
F / -15˚C
Cutout: 4-1/2"
39W
0.333A / 0.144A
75˚C (Max)
>15%
>50,000
5˚ F / -15˚C
Trim
Adjustable elbow trim allows fine-tuned aiming 90˚ vertical and 359˚ rotation. Small tab on
face of trim for ease of lamp replacement. Two spring brackets secure trim in housing.
Optional
FS
NRA-28
NRA-38
14-7/8
4-1/2"
Ceiling Cutout: 4-1/2"
Junction Box
Prewired 25 cubic inch .064" thick galvanized steel, with seven 7/8" knockouts, four Romex®
pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the
bottom, and quick connectors are supplied on all leads. Through branch circuit wiring,
(4 in, 4 out).
14-7/8" - 18-3/4"
Cut out: 4-1/2"
Height: 6-3/8"
Housing Length: 14-7/8" to 18-3/4"
Housing Width: 7-1/8"
NHID-4GX10W
Accessories
Fusing
Flat Bar hanger 24"
Channel hanger 25"
Labels and Listings
UL Listed for damp location
Trim OD: 4-3/4"
Create a complete fixture/trim catalog number:
Housing - select one box from each column
Catalog No.
NHID-4
Lamps
1
Wattage
20
Ballast
Adjustable: 90˚ Vertical, 359˚ Rotation
Example: N H I D - 4 2 0 / NHID-4GX10W
Adjustable Elbow Trim
Options
Dimming
Emergency
Fuse
Catalog No.
Lamp
NHID-4
GX10
Beam Spread
Finish
W
39
Baffle Finishes: W = White
6505 Gayhart St., Commerce, CA 90040
Phone: 800.686.6672 • FAX 800.500.9955
www.noralighting.com • e-mail: nora@noralighting.com
Specifications subject to change without notice. © 2008
Download