HALO
®
DESCRIPTION
Type
IC AIR-TITE(TM) fixture for use with H3 3" series trims. Housing is AIRTITE
with supplied gasket and prevents airflow between heated or air
conditioned spaces and unconditioned attic areas. For use with 120V GU10
lamps.
Catalog #
H38ICAT is IC rated and may be used in insulated ceilings and be covered
with insulation material.
Comments
Project
Date
Prepared by
SPECIFICATION FEATURES
Housing
IC rated double wall aluminum
construction.
Plaster Frame
Housing adjusts in plaster frame to
accommodate up to 1-1/2" ceiling
thickness. Galvanized steel
construction.
Plaster frame features include:
- Regressed locking screw for
securing hanger bars.
- Cutouts for easily crimping
hanger bars in position.
- Halo name embossed on
plaster frame. The housing
may be removed from plaster
frame to provide access to
the junction box.
Junction Box
- UL Listed for through branch
circuit wiring (maximum 6
No.14 ga., 90°C conductors).
- Four 1/2" trade size conduit
knockouts with true pry-out
slots are positioned to accommodate straight conduit runs.
- Three Slide-N-Side(TM) wire
traps allow non-metallic
sheathed cable to be installed
without tools and without
removing knockouts. Accepts a
wide range of non-metallic
sheathed cable.
- Allows wiring connections
to be made outside the
junction box.
- Simply insert the cable
directly into the trap
after connections are made.
- Accommodates the following
standard non-metallic sheathed
cable sizes: (US) #14/2, #14/3,
#12/2, #12/3 (Canada) #14/2,
#14/3, #12/2.
- Pass-N-Thru(TM) feature allows
bar hangers to be shortened.
without removing from plaster
frame.
- Score lines allow "tool-less"
shortening for 12" joists.
- Bar hangers may be repositioned 90°.
- Integral T-bar clip snaps
onto T-bars - no additional
clips required.
Got NAIL! (TM) Bar Hangers
- Pre-installed nail easily
installs in regular lumber,
engineered lumber and
laminated beams.
- Safety and guidance system
prevents snagging, ensures
smooth straight nail penetration and allows bar
hangers to be easily
removed if necessary.
- Automatic levelling flange
aligns the housing and
lets you hold the housing
in place with one hand
while driving nails.
- Housing can be positioned at
any point within 24" joist span.
Socket
GU10 socket for 120V GU10 lamps.
H38ICAT
Labels
- UL/cUL Listed
- Damp Location Listed
- UL listed for Feed Through
- UL listed for Direct Contact
with Insulation and combustible material
Meets following requirements:
- State of California Title 24
- Washington State Energy Code
- International Energy
Conservation Code (IECC)
- New York State Energy
Conservation Construction Code
- Certified Under ASTM-E283
for air tight construction.
3" IC AIR-TITE
Recessed Housing
120V GU10
3" TRIMS
FOR USE IN
INSULATED CEILINGS
CAN BE COVERED
WITH INSULATION
120V GU10
7 1/2"
[190mm]
with all trims listed
3 3/4"
[95mm]
Top View
R ead
Ceiling
Opening
9 1/8"
[231mm]
12 3/4"
[324mm]
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
y Fo
r
Ins t
In
a
l l a t io
ll
io
n
FEATURES:
• SLIDE-N-SIDE™ JUNCTION BOX
• GOT NAIL!™ BAR HANGERS
• PASS-N-THRU™ BAR HANGERS
• REGRESSED LOCKING SCREW
• HALO ID ON PLASTER FRAME
ADV060300
02/24/2009 3:55:58 PM
H38ICAT
ORDERING INFORMATION
Sample Number: H38ICAT-3001WHBB
Housings
Trims
H38ICAT =3" IC, AIR-TITE Small Aperture Line Reflectors
Voltage GU10 Housing
3002 =Adjustable Pinhole Reflector - 15 Degree
TIlt
Accessories
Lamp
3004 =Adjustable Reflector - 35 Degree Tilt
Z28 =50W GU10 25 Deg
120V
3005 =Crossblade Reflector
Reflector Finish
AC =Antique Copper Reflector
BKC =Black with Clear Reflector
ACC =Antique Copper with Clear Reflector
SN =Satin Nickel Reflector
SNC =Satin Nickel with Clear Reflector
TBZ =Tuscan Bronze with Tuscan Bronze
Reflector
TBZC =Tuscan Bronze with Clear Reflector
WHC =White with Clear Reflector
Baffle
3001 =Adjustable Pinhole Baffle
3003 =Adjustable Pinhole Baffle - 35 Degree Tilt
Baffle Finish
ACB =Antique Copper with Antique Copper Baffle
BKBB =Black with Black Baffle
ACBB =Antique Copper with Black Baffle
SNB =Satin Nickel with Satin Nickel Baffle
SNBB =Satin Nickel with Black Baffle
TBZB =Tuscan Bronze with Tuscan Bronze Baffle
TBZBB =Tuscan Bronze with Black Baffle
WHBB =White with Black Baffle
WHWB =White with White Baffle
Adjustable
3006 =Adjustable Slot Aperture
3011 =Square Adjustable - 15 Degree Tilt
3009 =Adjustable Gimbal - 35 Degree Tilt
3012 =Square Regressed Lens Adjustable Shower
Light
3013 =Square Adjustable Gimbal
Adjustable Finish
AC =Antique Copper Trim
BK =Black
ACBB =Antique Copper with Black Baffle
BKBB =Black with Black Baffle
SN =Satin Nickel Trim
TBZ =Tuscan Bronze Trim
SNBB =Satin Nickel with Black Baffle
TBZBB =Tuscan Bronze with Black Baffle
WH =White
WHWB =White with White Baffle
WHBB =White with Black Baffle
Shower Light
3007 =Lensed Shower light - 15 Degree Tilt
3008 =Shower light
Shower Light Finish
AC =Antique Copper
PCC =Polish Chrome w/ Clear Refl
FG =White w/ Frosted Glass
SN =Satin Nickel
TBZ =Tuscan Bronze
WHC =White with Clear Refelctor
Specifications and Dimensions subject to change without notice.
HALO • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADV060300
02/24/2009 3:55:58 PM