Serial Interface Converters PSM

advertisement
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2787457 LabelId:2787457 Operator:Phoenix
13:28:19, Mittwoch, 1. März 2000
PSM-NT-…/15 DC/100
PSM-VLTG/1,5METER
Description
Pcs. Pkt.
Type
Order No.
(US plug) 120 V AC
PSM-NT-120 AC/15 DC/100
27 87 45 7
1
(Euro plug) 230 V AC
PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Connecting cable, for the power
supply of a plug-in module via a
central power supply unit
PSM-VLTG/1,5 METER
27 87 46 0
1
Technical data
PSM-NT120 AC/…
PSM-NT-230 AC/…
Input voltage + 6 % -10 %
120 V AC
230 V AC
Frequency
50 Hz/60 Hz
50 Hz/60 Hz
Power consumption at nominal load
approx. 3.5 VA
approx. 3.5 VA
Input fuse
thermal release
thermal release
Output voltage
15 V DC at IN
15 V DC at IN
Output continuous current
100 mA
100 mA
Residual ripple at U N
≤ 550 mVrms
≤ 550 mVrms
Test voltage Input/Output
4 kV, 50 Hz, 1 min.
4 kV, 50 Hz, 1 min.
Ambient temperature range
-20 °C to + 50 °C
-20 °C to + 50 °C
Plug-in power supply unit,
to supply a plug-in module
including connecting cable
Input
Output
General data
Dimensional drawing
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2787172 LabelId:2787172 Operator:Phoenix
13:27:38, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
RS-232-Adapter
from 9 to 25-pos. SUB-D plug connector
Description
Adapter, to connect the PSM plug-in
modules (…/SB variants) to a 9-pos.
device interface
SUB-D9/SUB-D25
Adapter cable, to connect the PSM
plug-in modules (…/BB variants) to a
9-pos. device interface
SUB-D9/SUB-D25
Order No.
PSM-AD-D 9/B-D 25/B
27 87 17 2
1
PSM-KAD-9SUB 25/BS
27 61 29 5
1
PSM-KA-9SUB 9/BB/2METER
27 99 47 4
1
PSM-KA-9SUB 25/BB/2METER
27 61 06 2
1
27 99 45 8
1
(socket/socket)
(socket/pin)
Adapter cable, to connect the RS-232
SUB-D9/SUB-D9
switch cabinet modules
(PSM-EG-RS-232…) to a 9-pos.
(socket/socket)
device interface
Adapter cable, to connect the RS-232
SUB-D9/SUB-D25
switch cabinet modules
(PSM-EG-RS-232…) to a 25-pos.
(socket/socket)
device interface
Adapter, to connect two 25-pin SUB-D
SUB-D25/SUB-D25 PSM-AD-D 25/S-D 25/S
connectors
(pin/pin)
Phoenix Contact Elektronischer Katalog
Pcs. Pkt.
Type
Page 1 / 1
Module no:2799885 LabelId:2799885 Operator:Phoenix
13:34:19, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
HCS and Glass fiber cable
for indoor installation
Pcs. Pkt.
Description
Type
Order No.
HCS-cable,
duplex, 200/230 µm,
PSM-LWL/HCS…
27 99 88 5
Glass fiber cable,
duplex, 50/125 µm,
PSM-LWL/GDM…
27 99 32 2
F-SMA plug set
for self-assembly, consisting of 4 quick HCS fiber
mounting plugs
PSM-SET-FSMA/4-HCS
27 99 48 7
1
HCS preparation set
for F-SMA quick mounting plugs
PSM-HCS-KONFTOOL
27 99 52 6
1
Accessories
HCS fiber
Technical data
Cable identification symbol acc. to DIN 0888
Attenuation, typical
HCS cable
Glass fiber cable
PSM-LWL-HCS…
PSM-LWL-GDM…
J-VHH 2K200/230 9A17 +
8B17
J-VHH 2G50/125 2.4B 400
200/230 µm
50/125 µm
9 dB/km (at 660 nm)
8 dB/km (at 850 nm)
2.4 dB/km (at 850 nm)
Material, color
FRNC material, orange
FRNC material, orange
Diameter
3.9 x 6.6 mm
3.9 x 6.6 mm
Material, color
FRNC material, red/green
FRNC material, red/green
Diameter
2.9 mm
2.9 mm
Strain relief elements
non-metallic, aramid fiber
non-metallic, aramid fiber
Bending radius short term/long term
30 mm / 50 mm
30 mm / 50 mm
Tensile strength short term/long term
1000 N / 200 N
1000 N / 200 N
Lateral pressure short term/long term
100 N/cm / 50 N/cm
100 N/cm / 50 N/cm
Impact strength
1.5 Nm / 3 blows
1.5 Nm / 3 blows
Weight
28 kg/km
28 kg/km
Temperature during operation
–20 °C to + 70 °C
– 20 °C to + 70 °C
Outer cladding
Single strand
Mechanical properties
General data
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2799445 LabelId:2799445 Operator:Phoenix
13:33:38, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
HCS and Glass fiber cable
for outdoor installation
Pcs. Pkt.
Description
Type
Order No.
HCS-cable,
duplex, 200/230 µm,
PSM-LWL/HCSO…
27 99 44 5
Glass fiber cable,
duplex, 50/125 µm,
PSM-LWL/GDO…
27 99 43 2
Technical data
HCS cable
Glass fiber cable
PSM-LWL/HCSO…
PSM-LWL/GDO…
AT-VQH(BN)H 2K200/230
AT-VQH(BN)H 2G50/125
8A17+7B20 LG
2.5B 400 LG
Fiber
200/230 µm
50/125 µm
Attenuation, typical
12 dB/km (at 660 nm)
Cable identification symbol acc. to DIN 0888
9 dB/km (at 850 nm)
2.5 dB/km (at 850 nm)
Material, color
PE, black
PE, black
Diameter
11.1 mm
11.1 mm
Strain relief elements
aramid/glass fibers
aramid/glass fibers
Rodent protection
glass fiber yarn
glass fiber yarn
Longitudinal watertightness
yes
yes
Material, color
FRNC material, red/green
FRNC material, red/green
Diameter
2.9 mm
2.9 mm
Strain relief elements
non-metallic, aramid fiber
non-metallic, aramid fiber
Bending radius short term/long term
300 mm / 400 mm
300 mm / 400 mm
Tensile strength short term/long term
1000 N / 200 N
1000 N / 200 N
Lateral pressure short term/long term
500 N/cm / 300 N/cm
500 N/cm / 300 N/cm
Impact strength
1.5 Nm / 3 blows
1.5 Nm / 3 blows
Weight
46 kg/km
46 kg/km
Temperature during operation
–25 °C to + 70 °C
– 30 °C to + 70 °C
Outer cladding
Single strand
Mechanical properties
General data
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2799539 LabelId:2799539 Operator:Phoenix
13:33:55, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-FO-POWERMETER
Universal fiber optic measuring case
Description
Type
Order No.
Fiber optic measuring case, consisting of
optical power meter, F-SMA-/B-FOC adapters,
reference fibers and operating instructions
PSM-FO-POWERMETER
27 99 53 9
Pcs. Pkt.
1
Technical data
Measuring instrument (PSM-FO-POWERMETER)
Receiver
large-format silicon element
Wavelength
660 nm, 780 nm, 850 nm, switchable
Measuring range
-70 dBm to +6 dBm
Accuracy
± 0.25 dB
Resolution
0.01 dB
Ambient temperature range
0 °C to + 45 °C
Relative humidity
max. 95 %
Weight
180 g
Dimensions
(115 / 70 / 25) mm
Adapter fibers
Input attenuation acc. to IEC 874-1 method 7
polymer fiber 980/1000 µm F-SMA
1.5 … 2.0 dB
HCS fiber 200/230 µm F-SMA
1.5 … 2.0 dB
glass fiber 50/125 µm F-SMA
1.5 … 2.0 dB
glass fiber 50/125 µm B-FOC
1.5 … 2.0 dB
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2799526 LabelId:2799526 Operator:Phoenix
13:33:49, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-HCS-KONFTOOL
HCS preparation set for
F-SMA quick mounting plugs
Description
Preparation kit
for F-SMA quick mounting plugs
Phoenix Contact Elektronischer Katalog
HCS fiber
Type
Order No.
PSM-HCS-KONFTOOL
27 99 52 6
Pcs. Pkt.
1
Page 1 / 1
Module no:2744319 LabelId:2744319 Operator:Phoenix
12:45:29, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-LWL/KDHEAVY-... Z
Polymer fiber optic fiber cable,
medium-weight version for indoor installation
Description
Polymer fiber
cable, duplex,
980/1000µm,
medium-weight
version for
permanent indoor
installation
Type
Order No.
Meter ware without plug PSM-LWL-KDHEAVY-980/1000
27 44 31 9
cable with plug PSM-LWL-KDHEAVY/… 1)
Pcs.
Pkt.
27 44 96 6
1
PSM-SET-FSMA/4-KT
27 99 72 0
1
PSM-SET-FSMA-POLISH
27 99 34 8
1
PSM-FO-STRIP
27 44 19 9
1
PSM-POF-KONFTOOL
27 44 13 1
1
93 93 90 9
1
94 23 43 9
1
(see sample orders)
Accessories
F-SMA plug set for polymer fiber,
for self assembly, consisting of 4
quick mounting plugs with bend
protection sleave
Polymer fiber polish set,
for F-SMA quick mounting plugs
Stripping tool for polymer fiber
– Cable knife for external sheath
– Stripping tool for individual elements
Polymer fiber DIY Case,
consisting of: stripping knife,
stripping tool, polishing wheel,
polishing pad, emery paper and
8 F-SMA quick mounting plugs
Fiber optic installation guideline,
(free)
Technical data
German IBS SYS FOC
ASSEMBLY D
English BS SYS FOC
ASSEMBLY GB
Polymer fiber cable
PSM-LWL/KDHEAVY…
Cable identification symbol acc. to DIN 0888
CA-1D2Y2P 980/1000 160A 10
Fiber
980/1000 mm
Attenuation, typical
230 dB/km (at 660 nm)
Outer cladding
Material, color
PUR, red
Diameter
6.0 mm ± 0.5 mm
Strain relief elements
non-metallic, aramide yarns
Single strand
Material color
Phoenix Contact Elektronischer Katalog
PA black/orange
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2744319 LabelId:2744319 Operator:Phoenix
Material, color
PA, black/orange
Diameter
2.2 mm ± 0.07 mm
12:45:29, Mittwoch, 1. März 2000
Mechanical properties
Bending radius short term/long term
30 mm / 50 mm
Tensile strength short term/long term
600 N / 10 N
Lateral pressure short term/long term
200 N/cm / 20 N/cm
Impact strength
2 Nm / 10 blows
General data
Weight
28 kg/km
Temperature during
operation
– 20 °C to + 70 °C
1
) Please do not forget to indicate preparation, see sample order 2.
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2799283 LabelId:2799283 Operator:Phoenix
13:33:13, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-LWL/KDL-... Z
Polymer fiber optic fiber cable,
light-weight version for indoor installation
Description
Order No.
Type
Meter ware without plug PSM-LWL-KDL-980/1000
Polymer fiber
cable, duplex,
980/1000 µm,
light-weight
version for
indoor installation
cable with plug PSM-LWL-KDL/… 1)
Pcs.
Pkt.
27 99 28 3
27 44 95 3
1
PSM-SET-FSMA/4-KT
27 99 72 0
1
PSM-SET-FSMA-POLISH
27 99 34 8
1
PSM-FO-STRIP
27 44 19 9
1
PSM-POF-KONFTOOL
27 44 13 1
1
93 93 90 9
1
94 23 43 9
1
(see sample orders)
Accessories
F-SMA plug set for polymer fiber,
for self assembly, consisting of 4
quick mounting plugs with bend
protection sleave
Polymer fiber polish set,
for F-SMA quick mounting plugs
Stripping tool for polymer fiber
– Cable knife for external sheath
– Stripping tool for individual elements
Polymer fiber DIY Case,
consisting of: stripping knife,
stripping tool, polishing wheel,
polishing pad, emery paper and
8 F-SMA quick mounting plugs
Fiber optic installation guideline,
(free)
German IBS SYS FOC
ASSEMBLY D
English BS SYS FOC
ASSEMBLY GB
Technical data
polymer fiber cable
PSM-LWL/KDL…
Cable identification symbol acc. to DIN 0888
CA-1D2Y2P 980/1000 160A 10
Fiber
980/1000 mm
Attenuation, typical
230 dB/km (at 660 nm)
Outer cladding
Diameter
2.2 x 4.4 mm
Single strand
Material, color
PE, black
Diameter
2.2 mm ± 0.07 mm
Mechanical properties
B
di
di
h tt
/l
t
Phoenix Contact Elektronischer Katalog
20
/ 30
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2799283 LabelId:2799283 Operator:Phoenix
Bending radius short term/long term
20 mm / 30 mm
Tensile strength short term/long term
40 N / 10 N
Lateral pressure short term/long term
60 N/cm / 10 N/cm
13:33:13, Mittwoch, 1. März 2000
General data
Weight
7.8 kg/km
Temperature during
operation
– 20 °C to + 70 °C
1
) Please do not forget to indicate preparation, see sample order 2.
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2744322 LabelId:2744322 Operator:Phoenix
12:45:34, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-LWL/RUGGED-... Z
Polymer fiber optic fiber cable,
heavy-weight or highly flexible version for indoor installation
Description
Type
Order No.
Polymer fiber
cable, duplex,
980/1000µm,
heavy-weight
version for
permanent indoor
installation
Meter ware without plug PSM-LWL-RUGGED-980/1000
Polymer fiber
cable, as above
however,
heavy-weight
highly flexible
version for
drag chain
applications
Meter ware without plug PSM-LWL-RUGGED-FLEX-980/1000 27 44 33 5
cable with plug PSM-LWL-RUGGED/… )
1
Pcs.
Pkt.
27 44 32 2
1
27 44 97 9
(see sample orders)
cable with plug PSM-LWL-RUGGED-FLEX/… 1)
1
27 44 98 2
(see sample orders)
Accessories
F-SMA plug set for polymer fiber,
for self assembly, consisting of 4
quick mounting plugs with bend
protection sleave
Polymer fiber polish set,
for F-SMA quick mounting plugs
PSM-SET-FSMA/4-KT
27 99 72 0
1
PSM-SET-FSMA-POLISH
27 99 34 8
1
PSM-FO-STRIP
27 44 19 9
1
PSM-POF-KONFTOOL
27 44 13 1
1
93 93 90 9
1
94 23 43 9
1
Stripping tool for polymer fiber
– Cable knife for external sheath
– Stripping tool for individual elements
Polymer fiber DIY Case,
consisting of: stripping knife,
stripping tool, polishing wheel,
polishing pad, emery paper and
8 F-SMA quick mounting plugs
Fiber optic installation guideline,
(free)
Phoenix Contact Elektronischer Katalog
German IBS SYS FOC
ASSEMBLY D
English BS SYS FOC
ASSEMBLY GB
Page 1 / 2
Module no:2744322 LabelId:2744322 Operator:Phoenix
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Technical data
12:45:34, Mittwoch, 1. März 2000
Polymer fiber cable
Polymer fiber cable
PSM-LWL/RUGGED…
PSM-LWL/RUGGEDFLEX…
Cable identification symbol acc. to DIN 0888
J-V11Y 4Y2P
980/1000 160A 10
J-V11Y 4Y2P
980/1000 250A 10
Fiber
980/1000 mm
980/1000 mm
Attenuation, typical
230 dB/km (at 660 nm)
280 dB/km (at 660 nm)
Material, color
PUR, rot
PUR, red
Diameter
8.0 mm ± 0.5 mm
8.0 mm ± 0.5 mm
Strain relief elements
non-metallic, aramid fiber
non-metallic, spun wool
Material, color
PA, black/orange
PA, black/orange
Diameter
2.2 mm ± 0.07 mm
2.2 mm ± 0.07 mm
Bending radius short term/long term
50 mm / 65 mm
50 mm / 65 mm
Tensile strength short term/long term
1000 N / 100 N
200 N / 100 N
Lateral pressure short term/long term
300 N/cm / 20 N/cm
300 N/cm / 20 N/cm
Impact strength
2 Nm / 10 blows
2 Nm / 10 blows
Duty cycle testing (bending diameter ≈ 10 x d)
–
5.000.000 cycles )
Weight
42 kg/km
51 kg/km
Temperature during
operation
– 20 °C to + 70 °C
– 20 °C to + 70 °C
Outer cladding
Single strand
Mechanical properties
2
General data
1
) Please do not forget to indicate preparation, see sample order 2.
) Criterion: Increase in attenuation ≤ 1 dB.
2
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2799416 LabelId:2799416 Operator:Phoenix
13:33:30, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-SET-…-LINK/2
Couplings for connecting two
B-FOC or F-SMA plugs
Description
Type
Order No.
Pcs. Pkt.
Coupling; set
consisting of 2 couplings for connecting
F-SMA plugs PSM-SET-FSMA-LINK/2
27 99 41 6
1
Coupling; set
consisting of 2 couplings for connecting
B-FOC plugs PSM-SET-BFOC-LINK/2
27 99 42 9
1
Technical data
F-SMA
B-FOC
Type of plug
F-SMA / type 905, IEC
874-2
B-FOC (ST ) / DIN
47254-1
Input attenuation
< 2.0 dB
< 2.0 dB

Dimensional drawing
Drilling diagram
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2799487 LabelId:2799487 Operator:Phoenix
13:33:43, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-SET-FSMA/4-HCS Z
Description
F-SMA-plug set, for HCS fiber,
for self assembly consisting of
4 quick mounting plugs with bend
protection sleave
Type
Order No.
Pcs.
Pkt.
PSM-SET-FSMA/4-HCS
27 99 48 7
1
Technical Data
Technical data for PSM-SET-FSMA/4-HCS
Cable abb. in acc. with DIN 0888
Plug type:
F-SMA/Typ 905, IEC 874-2
Input attenuation:
<2.0 dB for HCS fiber
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2799348 LabelId:2799348 Operator:Phoenix
13:33:18, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-SET-FSMA/4-KT Z
F-SMA quick mounting plug for polymer fiber
Accessories
F-SMA plug set for polymer fiber,
for self assembly, consisting of 4
quick mounting plugs with bend
protection sleave
Polymer fiber polish set,
for F-SMA quick mounting plugs
PSM-SET-FSMA/4-KT
27 99 72 0
1
PSM-SET-FSMA-POLISH
27 99 34 8
1
PSM-FO-STRIP
27 44 19 9
1
PSM-POF-KONFTOOL
27 44 13 1
1
93 93 90 9
1
94 23 43 9
1
Stripping tool for polymer fiber
– Cable knife for external sheath
– Stripping tool for individual elements
Polymer fiber DIY Case,
consisting of: stripping knife,
stripping tool, polishing wheel,
polishing pad, emery paper and
8 F-SMA quick mounting plugs
Fiber optic installation guideline,
(free)
German IBS SYS FOC
ASSEMBLY D
English BS SYS FOC
ASSEMBLY GB
Technical data for PSM-SET-FSMA/4-KT
Plug type:
F-SMA/type 905, IEC 874-2
Input attenuation:
< 1.5 dB for polymer fiber
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2799636 LabelId:2799636 Operator:Phoenix
13:34:01, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
OPTOSUB-PLUS
Housing length 51.4
Description
INTERBUS/fiber optic
adapter,
for conversion the
Remote-OUT interface to
fiber optic
Connectionsystem
Type of fiber
Pcs. Pkt.
Type
Order No.
B-FOC
OPTOSUB-PLUS-G/OUT
27 99 63 6
1
polymer fiber F-SMA
OPTOSUB-PLUS-K/OUT
27 99 61 0
1
OPTOSUB-PLUS-G/IN
27 99 62 3
1
OPTOSUB-PLUS-K/IN
27 99 58 4
1
glass fiber
INTERBUS/fiber optic
glass fiber
B-FOC
adapter,
for conversion the Remote-IN polymer fiber F-SMA
interface to fiber optic
OPTOSUB-PLUS-G
for glass fiber
Technical data
OPTOSUB-PLUS-K
for polymer fiber
Dimensions
Height:
[mm] 16.3
Length
[mm] 57.0 (polymer fiber)
Length:
[mm] 62.7 (glass fiber)
Width:
[mm] 31.3/31.3
Supply voltage
none; supply from data channel
Nominal current consumption
typ. 35 mA
RS-485 interface
INTERBUS acc. to DIN 19258
- Connection
SUB-D 9-pos.
- Can be plugged onto:
REMOTE IN
Type …/IN, socket
REMOTE OUT
Type …/OUT, pin
Optic interface
Transmission performance (type of fiber)
min./typ.
-12.0/– dBm (50/125 µm)
-4.5/– dBm (980/1000 µm)
-12.0 dBm (62.5/125 µm)
Receiver sensitivity
min./typ.
Wavelength
Transmission length incl. 3 dB system
reserve
min./typ.
-26.0 dBm
-24.0/– dBm
850 nm
660 nm
• 3600/–m with F-G 50/125
3.0 dB/km
• 50/– m
OPTOSUB/OPTOSUB with
F-K 980/1000 220 dB/km
4500/– m with F-G 50/125
2.4 dB/km
• 40/– m OPTOSUB/LWL
bus TB. with F-K 980/1000
220 dB/km
3200/– m with F-G 62.5/125
3.4 dB/km
Connection
F-SMA
B-FOC
General data
Transmission channels (I/O)
2 (1/1), RD, TD, full duplex
Max. transmission rate
500 Kbit/s (NRZ)
Material of housing
ABS, metal-plated
Phoenix Contact Elektronischer Katalog
1)
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2799636 LabelId:2799636 Operator:Phoenix
13:34:01, Mittwoch, 1. März 2000
Material of housing
ABS, metal plated
Ambient temperature range
0 °C to +55 °C
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity
EN 50082-2
1)
NRZ = Non Return To Zero Code
Explanations:

B-FOC ^ = ST (registered trademark of AT&T)
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2799898 LabelId:2799898 Operator:Phoenix
13:34:26, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS 422/FO…
Housing width 45
Description
Type of fiber
Interface converter, for
conversion the data signals
of RS-422 (V.11) to
glass fiber
glass fiber
Connectionsystem
Pcs. Pkt.
Type
Order No.
B-FOC
PSM-EG-RS 422/FO-GST
27 99 89 8
1
F-SMA
PSM-EG-RS 422/LWL-G
27 61 33 4
1
polymer fiber F-SMA
PSM-EG-RS 422/LWL-K
27 61 37 6
1
PSM-EG-RS 422/FO-GST
PSM-EG-RS 422/LWL-G
for glass fiber
Technical data
PSM-EG-RS 422/LWL-K
for polymer fiber
Dimensions
Height (connection F-SMA)
[mm]
112
Height (connection B-FOC)
[mm]
120
Length:
[mm]
75
Width:
[mm]
45
Supply voltage
24 V DC ± 20%
24 V DC ± 20%
Nominal current consumption
max. 95 mA
max. 70 mA
RS-422 interface
acc. to DIN 66 348-1, CCITT V.11, DTE
- Terminating resistance
receiver 150 Ω, pull up/down 510 Ω
- Transmission length
50 m, twisted pair
- Connection
SUB-D 15
(pin)/COMBICON
Optic interface
Transmission performance (type of fiber)
Receiver sensitivity
min./typ.
min./typ.
-16.0/-14.8 dBm (50/125 µ
m)
-6.0/- dBm (980/1000 µm)
-12.6/-11.4 dBm (62.5/125
µm)
-22.0/- dBm (200/230 µm)
-25.0/-27.0 dBm
-26.6/- dBm (980/1000 µm)
-28.6/- dBm (200/230 µm)
Wavelength
Transmission length incl. 3 dB system
reserve
min./typ.
850 nm
660 nm
• 2500/3800 m with F-G
50/125 2.4 dB/km
• 70/80 m with F-K
980/1000 230 dB/km
• 2000/3050 m with F-G
50/125 3.0 dB/km
• 400/500 m with F-S
200/230 9 dB/km
• 2750/3700 m with F-G
62.5/125 3.4 dB/km
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2799898 LabelId:2799898 Operator:Phoenix
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Connection
13:34:26, Mittwoch, 1. März 2000
F-SMA
B-FOC / F-SMA
General data
Transmission channels (I/O)
2 (1/1), RxD, TxD, full
duplex
Max. transmission rate
500 Kbit/s (NRZ)
Electrical isolation
RS-422 / supply
Test voltage
2.5 kVrms. , 50 Hz, 1 min.
Material of housing
ABS, color: green
Connection data screw terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity
EN 50082-2
1)
2
1)
NRZ = Non Return To Zero Code
Explanations:

B-FOC ^ = ST (registered trademark of AT&T)
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761431 LabelId:2761431 Operator:Phoenix
13:12:41, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-PROFIB/FO…
for Profibus
Housing width 45
Description
T-coupler, for converting
RS-485 profibus to two fiber
optic cables
End-of-line unit, for
converting RS-485 profibus
to one fiber optic cable
Type of fiber
Connection
system
Pcs. Pkt.
Type
Order No.
B-FOC
PSM-EG-PROFIB/FO-T/G
27 61 43 1
1
polymer fiber F-SMA
PSM-EG-PROFIB/FO-T/K
27 61 12 7
1
B-FOC
PSM-EG-RS485W2/FO-E/G
27 61 84 2
1
polymer fiber F-SMA
PSM-EG-RS485W2/FO-E/K
27 61 48 6
1
glass fiber
glass fiber
Technical data
for glass fiber
Dimensions
Height:
[mm] 120
Length:
[mm] 75
Width:
[mm] 45
Supply voltage via COMBICON
24 V DC ±20 %
Nominal current consumption
max. 110 mA
RS 485 interface
Profibus acc. to DIN 19 245-1, -2, -3
2-wire, half duplex, automatic control
Data format, coding
UART (11 Bit NRZ)
Transmission rate (adjustable via DIP
switch)
(9.6 / 19.2 / 93.75 / 187.5 / 500 / 1500) kBit/s
Bus terminating resistance
150 Ω, switchable; 390 Ω pull up/down, switchable
Transmission length
0…50 m, twisted pair, shielded
Connection
SUB-D 9 (socket)/COMBICON
Optical interface
acc. to technical guideline PNO, FA2, AK 1.2
Transmission protocol
transparent to protocol to the RS-485 interface
Transmission performance (type of fiber)
1)
min./typ.
- 15.5/-13.0 dBm (50/125 µm)
- 12.0/ -9.5 dBm (62.5/125 µm)
Receiver sensitivity
min./typ.
850 nm
Wavelength
Transmission length incl. 3 dB system
reserve
- 25.0/-27.0 dBm
min./typ.
• 2700/3800 m with F-G 50/125 2.4 dB/km
• 2100/3000 m with F-G 50/125 3.0 dB/km
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2761431 LabelId:2761431 Operator:Phoenix
13:12:41, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
• 3000/3700 m with F-G 62.5/125 3.4 dB/km
B-FOC
Connection
General data
Bit distortion input
±35 %
Bit distortion output
≤5%
Bit delay
≤ 0.8 Bit
Electrical isolation
RS-485 / supply
Test voltage
2 kVrms , 50 Hz, 1 min.
Fault warning output
60 V AC/DC, 1 A
Material of housing
ABS, color: green
Connection data screw terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to +50 °C
Electromagnetic compatibility:
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-2
• Immunity
EN 50082-2
2)
2
1)
NRZ = Non Return To Zero Code
Fault warning output in preparation!
Explanations:
2)

B-FOC X ST (registered trademark of AT&T)
Material of housing seeproduct-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2799827 LabelId:2799827 Operator:Phoenix
13:34:14, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS 232/FO…
Housing width 45
Description
Type of fiber
Interface converter, for
conversion from RS-232
(V.24) to
glass fiber
Connectionsystem
Pcs. Pkt.
Type
Order No.
B-FOC
PSM-EG-RS 232/FO-GST
27 99 82 7
1
glass fiber
F-SMA
PSM-EG-RS232/LWL-G
27 61 27 9
1
polymer fiber
F-SMA
PSM-EG-RS 232/LWL-K
27 61 36 3
1
PSM-RS 232/FO-GST
PSM-RS 232/LWL-G
for glass fiber
Technical data
PSM-RS 232/LWL-K for
polymer fiber
Dimensions
Height (connection F-SMA)
[mm] 112
Height (connection B-FOC)
[mm] 120
Length:
[mm] 75
Width:
[mm] 45
Supply voltage
24 V DC ± 20%
24 V DC ± 20%
Nominal current consumption
max. 85 mA
max. 70 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
- Transmission length
15 m
- Connection
SUB-D 9 (pin)/COMBICON
Optical interface
Transmission performance (type of fiber)
Receiver sensitivity
min./typ.
min./typ.
-16.0/-14.8 dBm (50/125 µ
m)
-6.0/- dBm (980/1000 µm)
-12.6/-11.4 dBm (62.5/125
µm)
-22.0/- dBm (200/230 µm)
-25.0/-27.0 dBm
-26.6/- dBm (980/1000 µm)
-28.6/- dBm (200/230 µm)
Wavelength
Transmission length incl. 3 dB system
reserve
min./typ.
850 nm
660 nm
• 2500/3800 m with F-G
50/125 2.4 dB/km
• 70/80 m with F-K
980/1000 230 dB/km
• 2000/3050 m with F-G
50/125 3.0 dB/km
• 400/500 m with F-S
200/230 9 dB/km
• 2750/3700 m with
F-G 62.5/125 3.4 dB/km
Connection
B-FOC / F-SMA
F-SMA
General data
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2799827 LabelId:2799827 Operator:Phoenix
13:34:14, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
General data
Transmission channels
2 (1/1), RxD, TxD, full duplex
Max. transmission rate
64 Kbit/s (NRZ)
Electrical isolation
RS-232 / supply
Test voltage
2.5 kVrms. , 50 Hz,
1 min.
Material of housing
ABS, color: green
Connection data screw terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-2
• Immunity
EN 50082-2
1)
2
1)
NRZ = Non Return To Zero Code
Explanations:

B-FOC ^ = ST (registered trademark of AT&T)
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2799814 LabelId:2799814 Operator:Phoenix
13:34:07, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-TTY/FO…
Housing width 45
Description
Type of fiber
glass fiber
Interface converter, for
conversion from TTY (CL)
glass fiber
to
polymer fiber
Connection
system
Pcs. Pkt.
Type
Order No.
B-FOC
PSM-EG-TTY/FO-GST
27 99 81 4
1
F-SMA
PSM-EG-TTY/LWL-G
27 61 52 5
1
F-SMA
PSM-EG-TTY/LWL-K
27 61 53 8
1
PSM-TTY/FO-GST
PSM-TTY/LWL-G
for glass fiber
Technische Daten
PSM-TTY/LWL-K
for polymer fiber
Dimensions
Height (connection F-SMA)
[mm] 112
Height (connection B-FOC)
[mm] 120
Length:
[mm] 75
Width:
[mm] 45
Supply voltage
24 V DC ± 20%
24 V DC ± 20%
Nominal current consumption
max.125 mA
max. 125 mA
TTY interface
CL2 acc. to DIN 66 348-1
- Operating mode
active, half active, passive
- Apparent ohmic resistance
≤ 500 Ω
- Transmission length
1000 m, twisted pair
- Connection
SUB-D 9 (socket)/COMBICON
Optical interface
Transmission performance (type of fiber)
Receiver sensitivity
min./typ.
min./typ.
-16.0/-14.8 dBm (50/125 µ
m)
-6.0/- dBm (980/1000 µm)
-12.6/-11.4 dBm (62.5/125
µm)
-22.0/- dBm (200/230 µm)
-25.0/-27.0 dBm
-26.6/- dBm (980/1000 µm)
-28.6/- dBm (200/230 µm)
Wavelength
Transmission length incl. 3 dB system
reserve
min./typ.
850 nm
660 nm
• 2500/3800 m with F-G
50/125 2.4 dB/km
• 70/80 m with F-K
980/1000 230 dB/km
• 2000/3050 m with F-G
50/125 3.0 dB/km
• 400/500 m with F-S
200/230 9 dB/km
• 2750/3700 m with
F-G 62 5/125 3 4 dB/km
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2799814 LabelId:2799814 Operator:Phoenix
13:34:07, Mittwoch, 1. März 2000
F-G 62.5/125 3.4 dB/km
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Connection
F-SMA
B-FOC / F-SMA
General data
Transmission channels
2 (1/1), RxD, TxD, full duplex
Max. transmission rate
19.2 Kbit/s (NRZ)
Electrical isolation
TTY / supply
Test voltage
2.5 kVrms. , 50 Hz, 1 min.
Material of housing
ABS, color: green
Connection data screw terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-2
• Immunity
EN 50082-2
1)
2
1)
NRZ = Non Return To Zero Code
Explanations:

B-FOC ^ = ST (registered trademark of AT&T)
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (seeproduct-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761554 LabelId:2761554 Operator:Phoenix
13:12:58, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/FO-...
Housing length 87
Description
Type of fiber
Interface converter, for
conversion from RS-232
(V.24) to
glass fiber
Connectionsystem
Pcs. Pkt.
Type
Order No.
F-SMA
PSM-V24/FO-G/S
27 61 55 4
1
polymer fiber
F-SMA
PSM-V24/FOLC-K/S
27 99 54 2
1
polymer fiber
F-SMA
PSM-V24/FOLC-K/B
27 99 57 1
1
PSM-KAD-9SUB25/BS
27 61 29 5
1
for 120 V AC
PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC
PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Accessories
Adapter cable (9-pin SUB-D socket on
25-pin SUB-D pin)
Plug-in power supply unit, for
supplying a plug module
Technical data
PSM-V24/FO-G/S
for glass fiber
PSM-V24/FOLC-K/…
for polymer fiber
Dimensions
Height
[mm]
18
Length:
[mm]
87
Width:
[mm]
54.5
Supply voltage
10…18 V DC
10…18 V DC
Nominal current consumption
approx. 125 mA
approx. 80 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
- Transmission length
15 m
- Connection
SUB-D 25 (pin) or SUB-D 25 (socket)
Optical interface
Transmission performance (type of fiber)
Receiver sensitivity
min./typ.
min./typ.
-16.0 dBm (50/125 µm)
-6.0/- dBm (980/1000 µm)
-12.6 dBm (62.5/125 µm)
-22.0/- dBm (200/230 µm)
-25.0 dBm
-26.6/- dBm (980/1000 µm)
-28.6/- dBm (200/230 µm)
Wavelength
Transmission length incl. 3 dB system
reserve
min./typ.
850 nm
660 nm
• 2500/3800 m with F-G
50/125 2.4 dB/km
• 50/60 m with F-K
980/1000 230 dB/km
• 2000/3050 m with F-G
50/125 3.0 dB/km
• 300/400 m with F-S
200/230 9 dB/km
• 2750/3700 m with
F-G 62.5/125 3.4 dB/km
Connection
F-SMA
F-SMA
General data
Transmission channels
Phoenix Contact Elektronischer Katalog
2 (1/1), RxD, TxD, full duplex
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761554 LabelId:2761554 Operator:Phoenix
13:12:58, Mittwoch, 1. März 2000
Max. transmission rate
64 Kbit/s (NRZ)
Material of housing
aluminium, anodized, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-2
• Immunity
EN 50082-2
1)
1)
NRZ = Non Return To Zero Code
Explanations:

B-FOC ^ = ST (registered trademark of AT&T)
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761813 LabelId:2761813 Operator:Phoenix
13:13:36, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS485W2/FO…
for RS-485-2-wire systems
Housing width 45
Description
Type of fiber
Connection
system
T-coupler, for converting the
B-FOC
glass fiber
RS-485 2-wire interface to
two fiber optic cables
polymer fiber F-SMA
End-of-line unit, for
B-FOC
converting the RS-485 2-wire glass fiber
interface to one fiber optic
polymer fiber F-SMA
cable
Technical data
Pcs. Pkt.
Type
Order No.
PSM-EG-RS485W2/FO-T/G
27 61 81 3
1
PSM-EG-RS485W2/FO-T/K
27 61 24 0
1
PSM-EG-RS485W2/FO-E/G
27 61 84 2
1
PSM-EG-RS485W2/FO-E/K
27 61 48 6
1
for glass fiber
Dimensions
Height:
[mm] 120
Length:
[mm] 75
Width:
[mm] 45
Supply voltage via COMBICON
24 V DC ±20 %
Nominal current consumption
max. 110 mA
RS 485 interface
2-wire, half duplex, automatic control
Data format, coding
UART (10/11 bit can be set to; NRZ) , slip tolerant
Transmission rate (adjustable via DIP
switch)
(4.8 / 9.6 / 19.2 / 38.4 / 57.6 / 75 / 93.75 /
1)
115.2 / 136 / 187.5 / 375 / 500 / 1500) kBit/s
Bus terminating resistance
150 Ω, switchable; 390 W pull up/down, switchable
Transmission length
0…50 m, twisted pair, shielded
Connection
SUB-D 9 (socket)/COMBICON
Optical interface
transparent to protocol to the RS-485 interface
Transmission protocol
Transmission performance (type of fiber)
min./typ.
- 15.5/-13.0 dBm (50/125 µm)
- 12.0/ -9.5 dBm (62.5/125 µm)
Receiver sensitivity
min./typ.
850 nm
Wavelength
Transmission length incl. 3 dB system
reserve
- 25.0/-27.0 dBm
min./typ.
• 2700/3800 m with F-G 50/125 2.4 dB/km
2100/3000
Phoenix Contact Elektronischer Katalog
ith F G 50/125 3 0 dB/k
Page 1 / 2
Module no:2761813 LabelId:2761813 Operator:Phoenix
13:13:36, Mittwoch, 1. März 2000
• 2100/3000 m with F-G 50/125 3.0 dB/km
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
• 3000/3700 m with F-G 62.5/125 3.4 dB/km
B-FOC
Connection
General data
Bit distortion input
±35 %
Bit distortion output
≤5%
Bit delay
≤ 0.8 bit
Electrical isolation
RS-485 / supply
Test voltage
2 kVrms, 50 Hz, 1 min.
Fault warning output
60 V AC/DC, 1 A
Material of housing
ABS, color: green
Connection data screw terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to +50 °C
Electromagnetic compatibility:
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-2
• Immunity
EN 50082-2
2)
2
1)
NRZ = Non Return To Zero Code
Fault warning output in preparation!
Explanations:
2)

B-FOC X ST (registered trademark of AT&T)
Material ofhousing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761651 LabelId:2761651 Operator:Phoenix
13:13:04, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS485W4/FO
for RS-485 4-wire systems
Housing width 45
Description
Connectionsystem
Type of fiber
Pcs. Pkt.
Type
Order No.
PSM-EG-RS485W4/FO-T/G
27 61 65 1
1
PSM-EG-RS485W4/FO-T/K
on request
1
PSM-EG-RS422/FO-GST
27 99 89 8
1
PSM-EG-RS422/LWL-K
27 61 37 6
1
Y adapter cable, for coupling two …RS-485W4
converters for redundancy operation
PSM-KAD-RS485W4
27 99 56 8
1
Technical data
for glass fiber
T-coupler, for converting the
B-FOC
glass fiber
RS-485 4-wire interface to
two fiber optic cables
polymer fiber F-SMA
End-of-line, for converting
the RS 485 4-wire interface
to one fiber optic cables
glass fiber
B-FOC
polymer fiber F-SMA
Accessories
Dimensions
Height:
[mm] 120
Length:
[mm] 75
Width:
[mm] 45
Supply voltage via COMBICON
24 V DC ±20 %
Nominal current consumption
max. 110 mA
RS 485 interface
4-wire, full duplex, non-interacting
Data format and coding
as desired
Transmission rate (adjustable via DIP
switch)
4.8…128 kBit/s
Bus terminating resistance
220 Ω termination; 390 W pull up/down, switchable
Transmission length
0…50 m, twisted pair, shielded
Connection
SUB-D 15 (socket)/COMBICON
Optical interface
transparent to protocol to the RS-485 interface
Transmission protocol
Transmission performance (type of fiber)
min./typ.
- 15.5/-13.0 dBm (50/125 µm)
- 12.0/ -9.5 dBm (62.5/125 µm)
Receiver sensitivity
Wavelength
Phoenix Contact Elektronischer Katalog
min./typ.
- 25.0/-27.0 dBm
850 nm
Page 1 / 2
Module no:2761651 LabelId:2761651 Operator:Phoenix
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Wavelength
Transmission length incl. 3 dB system
reserve
13:13:04, Mittwoch, 1. März 2000
850 nm
min./typ.
• 2700/3800 m with F-G 50/125 2.4 dB/km
• 2100/3000 m with F-G 50/125 3.0 dB/km
• 3000/3700 m with F-G 62.5/125 3.4 dB/km
Connection
B-FOC
General data
Transmission channels
receive/transmit data, full duplex
Bit distortion
≤2%
Bit delay
≤ 1 µs
Electrical isolation
RS 485 / supply
Test voltage
2 kVrms, 50 Hz, 1 min.
Material of housing
ABS, color: green
Connection data screw terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Fault warning output
60 V AC/DC, 1 A
Ambient temperature range
0 °C to +50 °C
Electromagnetic compatibility:
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-2
• Immunity
EN 50082-2
2
1)
NRZ = Non Return To Zero Code
Explanations:

B-FOC X ST (registered trademark of AT&T)
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761800 LabelId:2761800 Operator:Phoenix
13:13:30, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-SUCO-K/FO…
for SUCONET-K
Housing width 45
Description
T-coupler, for converting
RS-485-SUCONET-K to two
fiber optic cables
End-of-line unit, for
converting
RS-485-SUCONET-K to one
fiber optic cable
Type of fiber
Connection
system
Pcs. Pkt.
Type
Order No.
B-FOC
PSM-EG-SUCO-K/FO-T/G
27 61 80 0
1
polymer fiber F-SMA
PSM-EG-SUCO-K/FO-T/K
on request
1
B-FOC
PSM-EG-RS485W2/FO-E/G
27 61 84 2
1
polymer fiber F-SMA
PSM-EG-RS485W2/FO-E/K
27 61 48 6
1
glass fiber
glass fiber
Technical data
for glass fiber
Dimensions
Height:
[mm] 120
Length:
[mm] 75
Width:
[mm] 45
Supply voltage via COMBICON
24 V DC ±20 %
Nominal current consumption
max. 110 mA
RS 485 interface
2-wire, half duplex, automatic control
Data format, coding
UART (11 Bit NRZ)
Transmission rate (adjustable via DIP
switch)
(9.6 / 19.2 / 93.75 / 187.5 / 375 / 500 / 1500) kBit/s
Bus terminating resistance
150 Ω, switchable; 390 W pull up/down, switchable
Transmission length
0…50 m, twisted pair, shielded
Connection
SUB-D 9 (socket)/COMBICON
1)
Optical interface
transparent to protocol to the RS-485 interface
Transmission protocol
Transmission performance (type of fiber)
min./typ.
- 15.5/-13.0 dBm (50/125 µm)
- 12.0/ -9.5 dBm (62.5/125 µm)
Receiver sensitivity
min./typ.
850 nm
Wavelength
Transmission length incl. 3 dB system
reserve
- 25.0/-27.0 dBm
min./typ.
• 2700/3800 m with F-G 50/125 2.4 dB/km
• 2100/3000 m with F-G 50/125 3.0 dB/km
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2761800 LabelId:2761800 Operator:Phoenix
13:13:30, Mittwoch, 1. März 2000
• 3000/3700 m with F-G 62.5/125 3.4 dB/km
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Connection
B-FOC
General data
Bit distortion input
±35 %
Bit distortion output
≤5%
Bit delay
≤ 0.8 Bit
Electrical isolation
RS-485 / supply
Test voltage
2 kVrms, 50 Hz, 1 min.
Fault warning output
60 V AC/DC, 1 A
Material of housing
ABS, color: green
Connection data screw terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to +50 °C
Electromagnetic compatibility:
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50081-2
• Immunity
EN 50082-2
2)
2
1)
NRZ = Non Return To Zero Code
Fault warning output in preparation!
Explanations:
2)

B-FOC X ST (registered trademark of AT&T)
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761266 LabelId:2761266 Operator:Phoenix
13:12:22, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS 232/RS 422-P/4K
Housing width 45
Description
Type
Order No.
Interface converter,
for converting RS-232 (V.24) to RS-422 (V.11),
with galvanic isolation, rail-mountable, 4 channels
PSM-EG-RS 232/RS 422-P/4K
27 61 26 6
Pcs. Pkt.
1
Technical data
Dimensions
Height
[mm]
110
Length:
[mm]
75
Width:
[mm]
45
Supply voltage
24 V DC ±20 %
Nominal current consumption
approx. 130 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 9 (pin)/COMBICON
RS-422 interface
acc. to DIN 66 348-1, CCITT V.11
• Terminating resistors
receiver, 150 Ω; pull up/down 510 W
• Transmission length
1000 m, twisted pair
• Connection
SUB-D 15 (pin)/COMBICON
General data
Transmission channels (I/O)
4 (2/2), TxD, RxD, RTS, CTS; full duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤5%
Bit delay
≤ 3 µs
Electrical isolation
RS-232 / RS-422
1)
supply / RS-422
Test voltage
2.5 kVrms. , 50 Hz, 1 min.
Insulation voltage
300 Vrms.
Material of housing
ABS, color: green
Connection data screw clamp terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
Phoenix Contact Elektronischer Katalog
2
Page 1 / 2
Module no:2761266 LabelId:2761266 Operator:Phoenix
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
g
p
y
c
13:12:22, Mittwoch, 1. März 2000
in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
1)
NRZ = Non Return To Zero Code
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2787305 LabelId:2787305 Operator:Phoenix
13:27:55, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/V11-P/…
Housing length 86
Pcs. Pkt.
Description
Type
Order No.
Interface converter,
for converting RS-232 (V.24) to RS-422 (V.11),
with galvanic isolation
PSM-V24/V 11-P/BB
27 87 30 5
1
PSM-V24/V 11-P/SB
27 87 31 8
1
Accessories
27 61 29 5
1
for 120 V AC PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Adapter cable (9-pin SUB-D female onto
25-pin SUB-D male)
Plug-in power supply unit, for supplying a
plug module
PSM-KAD-9SUB25/BS
Technical data
Dimensions
Height
[mm]
18
Length:
[mm]
86
Width:
[mm]
54.5
Supply voltage
15 ... 18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 65 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 25 (pin) or SUB-D 25 (socket)
RS-422 interface
acc. to DIN 66 348-1, CCITT V.11
• Terminating resistors
receiver, 150 Ω
• Transmission length
1000 m, twisted pair
• Connection
SUB-D 15 (socket)
General data
Transmission channels (I/O)
2 (1/1), TxD, RxD; full duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤4%
Bit delay
≤ 4 µs
Electrical isolation
RS-232 / RS-422
1)
supply / RS-422
Test voltage
1 kV DC, 1 min.
Material of housing
aluminum, anodized, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2787305 LabelId:2787305 Operator:Phoenix
• Immunity to interference
13:27:55, Mittwoch, 1. März 2000
EN 50082-2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
1)
NRZ = Non Return To Zero Code
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2787363 LabelId:2787363 Operator:Phoenix
13:28:08, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/V11/…
Housing length 64.5
Pcs. Pkt.
Description
Type
Order No.
Interface converter,
for converting RS-232 (V.24) to RS-422 (V.11),
without galvanic isolation
PSM-V24/V 11/BB
27 87 36 3
1
PSM-V24/V 11/SB
27 87 37 6
1
Accessories
Adapter cable (9-pin SUB-D female onto
25-pin SUB-D male)
Plug-in power supply unit, for supplying a
plug module
27 61 29 5
1
for 120 V AC PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC PSM-NT-230 AC/15 DC/100
27 87 44 4
1
PSM-KAD-9SUB25/BS
Technical data
Dimensions
Height
[mm]
18
Length:
[mm]
64.5
Width:
[mm]
56
Supply voltage
15 ... 18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 60 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 25 (pin) or SUB-D 25 (socket)
RS-422 interface
acc. to DIN 66 348-1, CCITT V.11
• Terminating resistors
receiver, 150 Ω
• Transmission length
100 m, twisted pair
• Connection
SUB-D 15 (socket)
General data
Transmission channels (I/O)
2 (1/1), TxD, RxD; full duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤4%
Bit delay
≤ 3 µs
Material of housing
ABS, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
1)
1)
NRZ = Non Return To Zero Code
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2787363 LabelId:2787363 Operator:Phoenix
13:28:08, Mittwoch, 1. März 2000
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761392 LabelId:2761392 Operator:Phoenix
13:12:27, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS 232/RS 485-P/2D
Housing width 45
Description
Interface converter,
for converting data signals between RS-232 (V.24) and
RS-485, with galvanic isolation, rail-mountable, direction
reversal via RTS,CTS
Type
Order No.
PSM-EG-RS232/RS485-P/2D
27 61 39 2
Pcs. Pkt.
1
Technical data
Dimensions
Height
[mm] 110
Length:
[mm] 75
Width:
[mm] 45
Supply voltage
24 V DC ±20 %
Nominal current consumption
approx. 80 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 9 (pin)/COMBICON
RS-485 interface
acc. to DIN 66 259-4
• Data direction change-over
via RS-232: RTS/CTS ≥ +3 V = RS-485 transmit
logic can be inverted using plug-in bridge
• Terminating resistance
can be switched on 180 Ω, pull up/down 470 Ω
• Transmission length
500 m, twisted pair
• Connection
SUB-D 9 (socket)/COMBICON
General data
Transmission channels (I/O)
2 (1/1), TD, RD; half duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤5%
Bit delay
≤ 3 µs
Electrical isolation
RS-232 / RS-485
1)
supply / RS-485
Test voltage
2.5 kVrms. , 50 Hz, 1 min.
Insulation voltage
300 Vrms.
Material of housing
ABS, color: green
C
ti
d t
l
t
i
l bl
Phoenix Contact Elektronischer Katalog
k
2
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761392 LabelId:2761392 Operator:Phoenix
13:12:27, Mittwoch, 1. März 2000
Connection data screw clamp terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
2
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2787321 LabelId:2787321 Operator:Phoenix
13:28:03, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/RS 485-P/…
Housing length 86
Description
Type
Order No.
Interface converter,
PSM-V24/RS 485-P/BB
for converting RS-232 (V.24) to RS-485, with galvanic
isolation, change-over of data direction via DTR (see text) PSM-V24/RS 485-P/SB
Pcs. Pkt.
27 87 32 1
1
27 87 33 4
1
PSM-V24/RS 485-P/BB/I
27 61 19 8
1
PSM-V24/RS 485-P/SB/I
27 61 45 7
1
PSM-KAD-9SUB25/BS
27 61 29 5
1
for 120 V AC
PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC
PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Interface converter,
for converting RS-232 (V.24) to RS-485, with galvanic
isolation, inverted change-over of data direction via DTR
Accessories
Adapter cable (9-pin SUB-D female
onto 25-pin SUB-D male)
Plug-in power supply unit, for
supplying a plug module
Technical data
Dimensions
Height
[mm]
18
Length:
[mm]
86
Width:
[mm]
54.5
Supply voltage
15 ... 18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 70 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 25 (pin ) or SUB-D 25 (socket)
RS-485 interface
acc. to DIN 66 259-4
• Data direction change-over
DTR ≤ -3 V = RS-485 transmit
DTR ≥ +3 V = RS-485 transmit (with …/I-module)
• Terminating resistance
150 Ω, can be switched on via jumper 7/9
• Transmission length
500 m, twisted pair
• Connection
SUB-D 9 (socket)
General data
Transmission channels (I/O)
2 (1/1), TD, RD; half duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤4%
Bit delay
≤ 7 µs
Electrical isolation
RS-232 / RS-485
1)
supply / RS-485
Test voltage
Phoenix Contact Elektronischer Katalog
1 kV DC, 1 min.
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2787321 LabelId:2787321 Operator:Phoenix
13:28:03, Mittwoch, 1. März 2000
Test voltage
1 kV DC, 1 min.
Material of housing
aluminum, anodized, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2787389 LabelId:2787389 Operator:Phoenix
13:28:13, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/RS 485/…
Housing length 64.5
Description
Type
Order No.
Interface converter,
for converting RS-232 (V.24) to RS-485, without galvanic PSM-V24/RS 485/BB
isolation, change-over of data direction via DTR (see text) PSM-V24/RS 485/SB
Pcs. Pkt.
27 87 38 9
1
27 87 39 2
1
PSM-KAD-9SUB25/BS
27 61 29 5
1
for 120 V AC
PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC
PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Accessories
Adapter cable (9-pin SUB-D female
onto 25-pin SUB-D male)
Plug-in power supply unit, for
supplying a plug module
Technical data
Dimensions
Height
[mm]
18
Length:
[mm]
64.5
Width:
[mm]
56
Supply voltage
15 ... 18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 70 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 25 (pin ) or SUB-D 25 (socket)
RS-485 interface
acc. to DIN 66 259-4
• Data direction change-over
DTR ≤ -3 V = RS-485 transmit
• Terminating resistance
150 Ω, can be switched on via jumper 7/9
• Transmission length
100 m, twisted pair
• Connection
SUB-D 9 (socket)
General data
Transmission channels (I/O)
2 (1/1), TD, RD; half duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤4%
Bit delay
≤ 5 µs
Material of housing
ABS, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
Phoenix Contact Elektronischer Katalog
1)
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2787389 LabelId:2787389 Operator:Phoenix
13:28:13, Mittwoch, 1. März 2000
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761253 LabelId:2761253 Operator:Phoenix
13:12:16, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS232/TTY-P/2K
Housing width 45
Description
Interface converter, for the conversion of data signals
from RS-232 (V.24) to TTY, with isolation, 2 channels,
rail-mountable, choice of active, half active or passive
mode
Type
Order No.
PSM-EG-RS232/TTY-P/2K
27 61 25 3
Pcs. Pkt.
1
Technical data
Dimensions
Height
[mm] 110
Length:
[mm] 75
Width:
[mm] 45
Supply voltage
24 V DC ± 20%
Nominal current consumption
approx. 100 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 9 (pin)/COMBICON
TTY interface
CL2 acc. to DIN 66 348-1
• Operating mode
active, half active, passive
• Apparent ohmic resistance
≤ 500 Ω
• Transmission length
1000 m, twisted pair
• Connection
SUB-D 9 (socket)/COMBICON
General data
Transmission channels (I/O)
2 (1/1), TxD / RxD, full duplex
Max. transmission rate
19.2 kbit/s (NRZ)
Bit distortion
≤5%
Bit delay
≤ 3 µs
Electrical isolation
RS-232 / TTY
1)
supply / TTY
Test voltage
2.5 kVrms. , 50 Hz, 1 min.
Insulation voltage
300 Vrms.
Material of housing
ABS, color: green
Connection data screw clamp terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Phoenix Contact Elektronischer Katalog
2
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761253 LabelId:2761253 Operator:Phoenix
13:12:16, Mittwoch, 1. März 2000
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
1)
NRZ = Non Return To Zero Code
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2787237 LabelId:2787237 Operator:Phoenix
13:27:43, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/TTY-P/AK/...
Housing length 85
Pcs. Pkt.
Description
Type
Order No.
Interface converter,
for conversion from RS-232 (V.24) to TTY, with isolation
(transmit and receive paths passive)
PSM-V24/TTY-P/AK/BB
27 87 23 7
1
PSM-V24/TTY-P/AK/SB
27 87 22 4
1
Accessories
Adapter cable (9-pin SUB-D female onto
25-pin SUB-D male)
Plug-in power supply unit, for supplying a
plug module
27 61 29 5
1
for 120 V AC PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC PSM-NT-230 AC/15 DC/100
27 87 44 4
1
PSM-KAD-9SUB25/BS
Technical data
Dimensions
Height
[mm]
18
Length:
[mm]
85
Width:
[mm]
54.5
Supply voltage
15 ...18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 85 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 25 (pin) or SUB-D 25 (socket)
TTY interface
CS acc. to DIN 66 258-1
• Operating mode
active, passive
• Apparent ohmic resistance
≤ 400 Ω
• Transmission length
1000 m, twisted pair
• Connection
SUB-D 25 (socket)
General data
Transmission channels (I/O)
2 (1/1), TxD / RxD, full duplex
Max. transmission rate
19.2 kbit/s (NRZ)
Bit distortion
≤3%
Bit delay
≤ 1.5 µs
Electrical isolation
RS-232 / TTY
1)
supply / TTY
Test voltage
1 kV DC, 1 min.
Material of housing
aluminum, anodized, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2787237 LabelId:2787237 Operator:Phoenix
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
13:27:43, Mittwoch, 1. März 2000
1)
NRZ = Non Return To Zero Code
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2787253 LabelId:2787253 Operator:Phoenix
13:27:49, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/TTY-P/PA/...
Housing length 85
Pcs. Pkt.
Description
Type
Order No.
Interface converter,
for conversion from RS-232 (V.24) to TTY, with isolation
(transmit and receive paths active)
PSM-V24/TTY-P/PA/BB
27 87 25 3
1
PSM-V24/TTY-P/PA/SB
27 87 24 0
1
Accessories
27 61 29 5
1
for 120 V AC PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Adapter cable (9-pin SUB-D female onto
25-pin SUB-D male)
Plug-in power supply unit, for supplying a
plug module
PSM-KAD-9SUB25/BS
Technical data
Dimensions
Height
[mm]
18
Length:
[mm]
85
Width:
[mm]
54.5
Supply voltage
15 ...18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 35 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 25 (pin) or SUB-D 25 (socket)
TTY interface
CS acc. to DIN 66 258-1
• Operating mode
passive
• Transmission length
1000 m, twisted pair
• Connection
SUB-D 25 (socket)
General data
Transmission channels (I/O)
2 (1/1), TxD / RxD, full duplex
Max. transmission rate
19.2 kbit/s (NRZ)
Bit distortion
≤3%
Bit delay
≤ 1.5 µs
Electrical isolation
RS-232 / TTY
1)
supply / TTY
Test voltage
1 kV DC, 1 min.
Material of housing
aluminum, anodized, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2787253 LabelId:2787253 Operator:Phoenix
• Immunity to interference
13:27:49, Mittwoch, 1. März 2000
EN 50082-2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
1)
NRZ = Non Return To Zero Code
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761402 LabelId:2761402 Operator:Phoenix
13:12:33, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/TTY/AK/...
Housing length 64.5
Pcs. Pkt.
Description
Type
Order No.
Interface converter,
for conversion from RS-232 (V.24) to TTY, without
isolation, (transmit and receive paths active)
PSM-V24/TTY/AK/BB
27 61 40 2
1
PSM-V24/TTY/AK/SB
27 61 41 5
1
Accessories
27 61 29 5
1
for 120 V AC PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Adapter cable (9-pin SUB-D female onto
25-pin SUB-D male)
Plug-in power supply unit, for supplying a
plug module
PSM-KAD-9SUB25/BS
Technical data
Dimensions
Height
[mm]
18
Length:
[mm]
64.5
Width:
[mm]
56
Supply voltage
15 ...18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 80 mA
RS-232 interface
acc. to DIN 66 259-1/CCITT V.28
• Connection
SUB-D 25 (pin) or SUB-D 25 (socket)
TTY interface
CS acc. to DIN 66 258-1
• Operating mode
active, passive
• Apparent ohmic resistance
≤ 350 Ω
• Transmission length
1000 m, twisted pair
• Connection
SUB-D 25 (socket)
General data
Transmission channels (I/O)
2 (1/1), TxD / RxD, full duplex
Max. transmission rate
19.2 kbit/s (NRZ)
Bit distortion
≤3%
Bit delay
≤ 1.5 µs
Material of housing
ABS, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
1)
1)
NRZ = Non Return To Zero Code
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761402 LabelId:2761402 Operator:Phoenix
13:12:33, Mittwoch, 1. März 2000
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761444 LabelId:2761444 Operator:Phoenix
13:12:47, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-EG-RS232/RS232-P/4K
Housing width 45
Description
Type
Order No.
Interface converter,
for the isolation of RS-232 (V.24) interfaces,
4 channels, rail-mountable
PSM-EG-RS232/RS232-P/4K
27 61 44 4
Pcs. Pkt.
1
Technical data
Dimensions
Height
[mm] 110
Length:
[mm] 75
Width:
[mm] 45
Supply voltage
24 V DC ± 20 %
Nominal current
consumption
approx. 75 mA
RS-232 interface
acc. to DIN 66259-1/CCITT V.28
Connection:
A
SUB-D 9 (pin)/COMBICON
B
SUB-D 9 (socket)/COMBICON
General data
Transmission length
15 m
Transmission channels
4(2/2); TxD / RxD / RTS / CTS, full duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤5%
Bit delay
≤ 3 µs
Isolation
RS-232 (A) / RS-232 (B)
1)
supply / RS-232 (B)
Test voltage
2.5 kVrms. , 50 Hz, 1 min.
Insulation voltage
300 Vrms.
Material of housing
ABS, color: green
Connection data screw clamp terminal blocks
0.2 - 2.5 mm (AWG 24-14)
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-2
I
it t i t f
Phoenix Contact Elektronischer Katalog
2
EN 50082 2
Page 1 / 2
Module no:2761444 LabelId:2761444 Operator:Phoenix
• Immunity to interference
13:12:47, Mittwoch, 1. März 2000
EN 50082-2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
1)
NRZ = Non Return To Zero Code
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2787473 LabelId:2787473 Operator:Phoenix
13:28:25, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-V24/V24-P/...
Housing length 85
Pcs. Pkt.
Description
Type
Order No.
Interface converter,
for the isolation of RS-232 (V.24) interfaces,
2 channels
PSM-V24/V24-P/BB
27 87 47 3
1
PSM-V24/V24-P/SB
27 87 40 2
1
PSM-KAD-9SUB25/BS
27 61 29 5
1
for 120 V AC
PSM-NT-120 AC/15 DC/100
27 87 45 7
1
for 230 V AC
PSM-NT-230 AC/15 DC/100
27 87 44 4
1
Accessories
Adapter cable (9-pin SUB-D female
onto 25-pin SUB-D male)
Plug-in power supply unit, for
supplying a plug module
Technical data
Dimensions
Height
[mm] 18
Length:
[mm] 54.5
Width:
[mm] 85
Supply voltage
15 ... 18 V DC or 12 V (± 5 %) via pin 18/7
Nominal current consumption
approx. 60 mA
RS-232 interface
acc. to DIN 66259-1/CCITT V.28
Connection:
A
SUB-D 25 (pin) or SUB-D 25 (socket)
B
SUB-D 25 (socket)
General data
Transmission length
15 m
Transmission channels
2 (1/1); TxD / RxD, full duplex
Max. transmission rate
64 kbit/s (NRZ)
Bit distortion
≤5%
Bit delay
≤ 3 µs
Isolation
RS-232 (A) / RS-232 (B)
1)
supply / RS-232 (B)
Test voltage
1 kV DC, 1 min.
Material of housing
aluminum, anodized, color: black
Ambient temperature range
0 °C to + 50 °C
Electromagnetic compatibility
c - in conformance with EMC directive 89/336/EEC
• Emitted interference
EN 50081-1
• Immunity to interference
EN 50082-2
1)
NRZ = Non Return To Zero Code
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2787473 LabelId:2787473 Operator:Phoenix
13:28:25, Mittwoch, 1. März 2000
Explanations:
Material of housing see product-line info.
Torque value of terminals, see product-line info.
The rated cross section (see product-line info) refers to untreated conductors without ferrules.
Block diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761677 LabelId:2761677 Operator:Phoenix
13:13:10, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-ODL-IBS…
Description
Type
Order No.
Data link, for converting the data signals from INTERBUS
PSM-ODL-IBS-A
to infra-red light (880 nm)
PSM-ODL-IBS-B
Pcs. Pkt.
27 61 67 7
1
27 61 71 6
1
Technical data
Dimensions
Height:
[mm]
232
Length:
[mm]
115
Width:
[mm]
235
Supply voltage
10 … 30 V DC
Nominal voltage
24 V DC
Nominal current consumption
approx. 280 mA with 24 V DC nominal voltage
Electrical isolation
RS 485/supply
Test voltage
500 Vrms, 50 Hz, 1 min.
Bus interface
INTERBUS acc. to DIN 19 258, RS 485 4-wire
Transmission rate
500 kBit/s
Configuration
– as bus terminal block with optical remote bus stub line,
incoming and outgoing remote bus both copper (fig. 2)
– as bus terminal block with optically incoming remote
bus, outgoing bus copper, copper stub line (fig. 2)
ID code
12 dec
Protocol chip
SUPI III
Optical interface
Transmission path
0.4 to 200 m
System reserve
35 %
Transmission medium
Infra-red light, 880 nm
Transmission procedure
frequency shift keying FSK, 7/13 MHz, deviation 1 MHz
Acceptance angle of the optics
± 1.5 ° to the optical axis
Optics
glass optics behind daylight filter
Switching outputs
Warning output
plus switching (VCC-2 V)
Interference output
plus switching (VCC-2 V)
S it hi
it
Phoenix Contact Elektronischer Katalog
200
A
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761677 LabelId:2761677 Operator:Phoenix
13:13:10, Mittwoch, 1. März 2000
Switching capacity
max. 200 mA
Control elements
membrane keyboard for standard, alignment and test
operation
Display elements
20-element bar graph for receiver power status, warning
and fault LEDs
General data
Electrical connection
screw connection PG 11, screw terminal blocks 0.14-1.5
2
2
mm solid (1 mm stranded)
Housing
die-cast aluminum
Type of protection
IP 65 (dust and splash-proof)
Weight
approx. 3 kg
Ambient temperature range
– 10 °C to + 50 °C (– 35 °C on request)
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50 081-2
• Immunity
EN 50 082-2
Dimensional drawing
Diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761693 LabelId:2761693 Operator:Phoenix
13:13:22, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-ODL-RS 422… PSM-ODL-RS 232…
Pcs. Pkt.
Description
Type
Order No.
Data link, for converting the data signals from RS-422 to
infra-red light (880 nm)
PSM-ODL-RS422-A
27 61 69 3
1
PSM-ODL-RS422-B
27 61 73 2
1
PSM-ODL-RS232-A
on request
1
PSM-ODL-RS232-B
on request
1
Data link, for converting the data signals from RS-232 to
infra-red light (880 nm)
Technical data
Dimensions
Height:
[mm]
232
Length:
[mm]
115
Width:
[mm]
235
Supply voltage
10 … 30 V DC
Nominal voltage
24 V DC
Nominal current consumption
approx. 280 mA at 24 V DC nominal voltage
Electrical isolation
RS-422/supply or RS-232/supply
Test voltage
500 Vrms, 50 Hz,
1 min.
Interface
RS-422 / 4-wire,
RS-232 (V.24), full duplex,
full duplex (CCITT V.11)
Software handshake
Transmission rate
300 Bit/s to 2 MBit/s
max. 64 kBit/s
Terminating resistance
Receiver 150 Ω,
pull up/down 470 W
Bit delay (complete system)
< 3 µs
Bit distortion (complete system)
< 10 % at max. transmission
rate
Optical interface
Transmission path
0.4 to 200 m
System reserve
35 %
Transmission medium
Infra-red light, 880 nm
Transmission procedure
frequency shift keying FSK, 7/13 MHz, deviation 1 MHz
Acceptance angle of the optics
± 1.5 ° to the optical axis
Optics
glass optics behind daylight
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Module no:2761693 LabelId:2761693 Operator:Phoenix
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Optics
13:13:22, Mittwoch, 1. März 2000
glass optics behind daylight
filter
Switching outputs
Warning output
plus switching (VCC-2 V)
Interference output
plus switching (VCC-2 V)
Switching capacity
max. 200 mA
Control elements
membrane keyboard for standard, alignment and test
operation
Display elements
20-element bar graph for receiver power status, warning
and fault LEDs
General data
Electrical connection
screw connection PG 11,
2
screw terminal blocks 0.14-1.5 mm solid (1 mm
stranded)
2
Housing
die-cast aluminum
Type of protection
IP 65 (dust and splash-proof)
Weight
approx. 3 kg
Ambient temperature range
– 10 °C to + 50 °C (– 35 °C on request)
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
• Emitted interference
EN 50 081-2
• Immunity
EN 50 082-2
Dimensional drawing
Diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761680 LabelId:2761680 Operator:Phoenix
13:13:17, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-ODL-RS 485 W2…
Pcs. Pkt.
Description
Type
Order No.
Interface converter, for converting the data signals from
RS-485 to infra-red light (880 nm)
PSM-ODL-RS485W2-A
27 61 68 0
1
PSM-ODL-RS485W2-B
27 61 72 9
1
Technical data
Dimensions
Height:
[mm]
232
Length:
[mm]
115
Width:
[mm]
235
Supply voltage
10 … 30 V DC
Nominal voltage
24 V DC
Nominal current consumption
approx. 280 mA with 24 V DC nominal voltage
Electrical isolation
RS 485/supply
Test voltage
500 Vrms, 50 Hz, 1 min.
RS-485 interface
2-wire, half duplex, automatic control
Transmission rate
9.6 kBit/s, 19.2 kBit/s, 38.4 kBit/s, 93.75 kBit/s, 187.5
kBit/s,
375 kBit/s, 500 kBit/s, 1.5 MBit/s (adjustable via DIP
switches)
Data format
UART (10/11 Bit can be switched over, NRZ)
Bit retiming
through oversampling
Bit delay RS-485/IR
< 1 Bit
Terminating resistance
switchable, 220 Ω, pull up/down 390 Ω
Optical interface
Transmission path
0.4 to 200 m
System reserve
35 %
Transmission medium
Infra-red light, 880 nm
Transmission procedure
frequency shift keying FSK, 7/13 MHz, deviation 1 MHz
Acceptance angle of the optics
1.5 ° to the optical axis
Optics
glass optics behind daylight filter
Switching outputs
Warning output
Phoenix Contact Elektronischer Katalog
plus switching (VCC-2 V)
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761680 LabelId:2761680 Operator:Phoenix
13:13:17, Mittwoch, 1. März 2000
Interference output
plus switching (VCC-2 V)
Switching capacity
max. 200 mA
Control elements
membrane keyboard for standard, alignment and test
operation
Display elements
20-element bar graph for receiver power status, warning
and fault LEDs
General data
Electrical connection
screw connection PG 11,
2
2
screw terminal blocks 0.14-1.5 mm solid (1 mm
stranded)
Housing
die-cast aluminum
Type of protection
IP 65 (dust and splash-proof)
Weight
approx. 3 kg
Ambient temperature range
– 10 °C to + 50 °C (– 35 °C on request)
Electromagnetic compatibility
c - in conformance with EMC guideline 89/336/EEC
. Emitted interference
EN 50 081-2
. Immunity
EN 50 082-2
Dimensional drawing
Diagram
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2799364 LabelId:2799364 Operator:Phoenix
13:33:24, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM PTK4
RS-485 distributor (4-fold)
Description
Type
Order No.
Passive RS-485 distributor, fitted with one
9-pin SUB-D pin strip and five 9-pin SUB-D
socket strips; 1:1 connected
PSM PTK-4
27 99 36 4
Pcs. Pkt.
1
Technical data
Max. voltage
60 V AC/DC
Current carrying capacity
1A
Test voltage
0.5 kVrms, 50 Hz, 1 min.
Plug connection
incoming
SUB-D 9-pin (pin)
outgoing
SUB-D 9-pin (socket)
branching
SUB-D 9-pin (socket)
Shield connection
SUB-D frame
Temperature range
-20 °C to +50 °C
Material of housing
PVC, flammability class VO
Dimensional drawing
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2760623 LabelId:2760623 Operator:Phoenix
13:12:09, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-PTK
RS-485 T-branch
(IEC)
2
[mm ]
rigid
solid
flexible
stranded AWG
Connection data
Printed circuit terminal 0.14-1.5 0.14-1.0 26-16
block
Pcs. Pkt.
Description
Type
Order No.
Passive RS-485 T-branch, fitted with one
9-pin SUB-D pin strip and two 9-pin SUB-D
socket strips; 1:1 connected
PSM-PTK
27 60 62 3
1
SZN/K
12 02 39 9
1
Accessories
Screwdriver,
blade: 0.4 x 2.5 x 75 mm, length: 150 mm
Technical data
Max. voltage
60 V AC/DC
Current carrying capacity
1A
Test voltage
0.5 kVrms, 50 Hz, 1 min.
Plug connection
incoming
SUB-D 9-pin (pin)
outgoing
SUB-D 9-pin (socket)
branching
SUB-D 9-pin (socket) or printed circuit terminal block
Shield connection
SUB-D frame or shield clamp
Temperature range
-20 °C to +50 °C
Material of housing
PVC, flammability class VO
Dimensional drawing
Phoenix Contact Elektronischer Katalog
Page 1 / 1
Module no:2744458 LabelId:2744458 Operator:Phoenix
13:14:10, Dienstag, 7. November 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PSM-ME-RS232/TTY-P Z
Gehäusebreite 22,5 mm
W
Beschreibung
Typ
Artikel-Nr.
Stck.
Pck.
Interface converter, for converting
RS-232 (V.24) auf TTY, mit galvanischer Trennung
2 Kanäle, schienenmontabel
PSM-ME-RS232/TTY-P
27 44 45 8
1
- 9pol. SUB-D-Buchse auf 25pol. SUB-D-Buchse
PSM-KA-9SUB25/BB/2METER
27 61 06 2
- 9pol. SUB-D-Buchse auf 9pol. SUB-D-Buchse
PSM-KA-9SUB9/BB/2METER
27 99 47 4
SUB-D-Stecker,
zur Selbstkonfektion von Daten-Leitungen
siehe SUBCON...
Zubehör
RS-232-Cable
Technische Daten
Maße
Höhe
118,6 mm
Länge
99 mm
Breite
22,5 mm
Versorgungsspannung
24 V AC/DC ±20 %
Nennstromaufnahme
typ. 75 mA
RS-232-Schnittstelle
nach ITU-T V.28, EIA/TIA-232, DIN 66259-1
- Anschluß
SUB-D 9 (Stift)
TTY-Schnittstelle
CL2 nach DIN 66 348-1
- Betriebsart
aktiv, halbaktiv oder passiv
- Bürde
≤ 500 W
- Übertragungslänge
1000 m, twisted pair
- Anschluß
steckbare Schraubklemme COMBICON
Allgemeine Daten
Übertragungskanäle
2(1/1); TxD/RxD, vollduplex
maximale Übertragungsrate
19,2 kBit/s(NRZ)
Bitverzerrung
≤5%
Bitverzögerung
≤ 3 µs
Phoenix Contact Elektronischer Katalog
1)
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2744458 LabelId:2744458 Operator:Phoenix
13:14:10, Dienstag, 7. November 2000
Galvanische Trennung
RS-232 // TTY // Versorgung
Prüfspannung
2,0 kVeff , 50 Hz, 1 min.
Gehäusematerial
PA V0, Farbe: grün
Anschlußdaten Schraubklemmen
0,2 - 2,5 mm (AWG24-14)
Umgebungstemperaturbereich
0 °C bis + 55 °C
Elektromagnetische Verträglichkeit
c Konform zur EMV-Richtlinie 89/336/EWG
• Störabstrahlung
EN 50081-1
• Störfestigkeit
EN 50082-2
Approbation
W
1)
2
NRZ = Non Return To Zero Code
Schaltbild
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761499 LabelId:2761499 Operator:Phoenix
13:12:52, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
SUBCON…-SH
with one cable entry
(IEC)
2
[mm ]
rigid
solid
flexible
stranded AWG
Connection data
Printed circuit terminal 0.14-1.5 0.14-1.0 26-16
block
Description
D-SUB plug connector with
one cable entry
9 pos.
15 pos.
25 pos.
Pcs. Pkt.
Type
Order No.
socket
SUBCON 9/F-SH
27 61 49 9
1
pin
SUBCON 9/M-SH
27 61 50 9
1
socket
SUBCON 15/F-SH
27 61 59 6
1
pin
SUBCON 15/M-SH
27 61 60 6
1
socket
SUBCON 25/F-SH
27 61 61 9
1
pin
SUBCON 25/M-SH
27 61 62 2
1
Accessories
Screw driver, blade: 0.4 x 2.5 x 75 mm, length: 150 mm
SZN/K
12 02 39 9
1
Optional fixing screws, short version (without knurl)
SUBCON-SHORTSCREW
27 99 69 4
20
Technical data
Plug connection
9-, 15- or 25-position D-SUB pin strip or socket strip
Max. voltage
60 V AC/DC
Current carrying capacity
1A
Plug cycles
> 50
Cable diameter (max./min.)
10 mm/4 mm
Fixing screws/torque
4-40 UNC/0.4 Nm
Screw terminal blocks:
Connection cross section (solid/stranded/AWG)
0.14-1.5 mm /0.14-1 mm /AWG 26-16
Torque
0.4 Nm
Temperature range
- 20 °C to + 75 °C
Material of housing
ABS-V0, metal-plated
Pin assignment
all 1 : 1
Phoenix Contact Elektronischer Katalog
2
2
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761499 LabelId:2761499 Operator:Phoenix
A
B
C
9 pos.
44.5
36.0
56.4
15 pos.
44.5
44.3
64.7
25 pos.
49.5
58
78.7
13:12:52, Mittwoch, 1. März 2000
Dimensional drawing
Phoenix Contact Elektronischer Katalog
Page 2 / 2
Module no:2761826 LabelId:2761826 Operator:Phoenix
13:13:42, Mittwoch, 1. März 2000
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
SUBCON-PLUS
with two cable entries
(IEC)
2
[mm ]
rigid
solid
flexible
stranded AWG
Connection data
Printed circuit terminal 0.14-1.5 0.14-1.0 26-16
block
Description
D-SUB plug connector with
two cable entries
Type
Order No.
Pcs. Pkt.
1
9 pos.
pin
SUBCON-PLUS-M1
27 61 82 6
1
9 pos.
pin
SUBCON-PLUS-M2
27 61 83 9
1
Accessories
Screw driver, blade: 0.4 x 2.5 x 75 mm, length: 150 mm
SZN/K
12 02 39 9
1
Optional fixing screws, short version (without knurl)
SUBCON-SHORTSCREW
27 99 69 4
20
Technical data
Plug connection
9-position D-SUB pin strip
Max. voltage
60 V AC/DC
Current carrying capacity
1A
Plug cycles
> 50
Cable diameter (max./min.)
10 mm/6 mm
Fixing screws/torque
4-40 UNC/0.4 Nm
Screw terminal blocks:
Connection cross section (solid/stranded/AWG)
0.14-1.5 mm /0.14-1 mm /AWG 26-16
Torque
0.4 Nm
Temperature range
- 20 °C to + 75 °C
Material of housing
ABS-V0, metal-plated
Pin assignment
Type M1: 1, 2, 3, 5, 6, 8 to 2 terminal blocks each
2
2
Type M2: 2, 3, 4, 5, 7, 9 to 2 terminal blocks each
Dimensional drawing
Phoenix Contact Elektronischer Katalog
Page 1 / 2
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2761826 LabelId:2761826 Operator:Phoenix
Phoenix Contact Elektronischer Katalog
13:13:42, Mittwoch, 1. März 2000
Page 2 / 2
Module no:2967840 LabelId:2967840 Operator:Phoenix
18:33:58, Donnerstag, 28. Juni 2001
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
PLC-O…230AC/1
Equipped with pluggable power solid-state relay
’’...6’’
Terminal width 14
WJ
(
planned)
M3
8
(IEC)
2
[mm ]
rigid
solid
flexible
stranded AWG
Connection data 0.14-2.5 0.14-2.5 26-14
I
U
[A]
[V]
*
*
*The electrical data are determined by the solid-state relay.
Order No.
Pcs.
Pkt.
24 V DC PLC-OSC- 24DC/230AC/1
29 67 84 0
10
48 V DC PLC-OSC- 48DC/230AC/1
29 67 85 3
10
60 V DC PLC-OSC- 60DC/230AC/1
29 67 86 6
10
120 V AC/110 V DC PLC-OSC-120UC/230AC/1
29 67 87 9
10
2
230 V AC/220 V DC ) PLC-OSC-230UC/230AC/1
29 67 88 2
10
24 V DC PLC-OSP- 24DC/230AC/1
29 67 89 5
10
48 V DC PLC-OSP- 48DC/230AC/1
29 67 90 5
10
60 V DC PLC-OSP- 60DC/230AC/1
29 67 91 8
10
120 V AC/110 V DC PLC-OSP-120UC/230AC/1
29 67 92 1
10
29 67 93 4
10
Input voltage Type
UN
Description
PLC relay, mit screw
connection,
consisting of base terminal block
PLC-BSC… and pluggable
miniature solid-state relay, for
mounting on 3
PLC-relay, mit spring cage
connection,
consisting of base terminal block
PLC-BSP… and pluggable
miniature solid-state relay, for
mounting on
2
230 V AC/220 V DC ) PLC-OSP-230UC/230AC/1
Phoenix Contact Elektronischer Katalog
Page 1 / 3
Module no:2967840 LabelId:2967840 Operator:Phoenix
18:33:58, Donnerstag, 28. Juni 2001
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Technical data
Input data
24 V DC
Nominal input voltage U N
0.8-1.2
Permissible range (in reference to U N)
1 signal (“H”) ≥ 0.8 x U N
Switching level
48 V DC
60 V DC
120 V AC/
230 V AC/
110 V DC
220 V DC )
0.8-1.1
0.8-1.1
0.8-1.2
0.8-1.2
≥ 0.8 x UN
≥ 0.8 x U N ≥ 0.8 x UN
2
≥ 0.8 x U N
0 signal (“L”) ≤ 0.25 x U N ≤ 0.25 x U N ≤ 0.3 x U N ≤ 0.25 x U N ≤ 0.4 x U N
Typ. input current at UN
9 mA
9 mA
6 mA
4 mA
3,5 mA
Typ. turn-on time for U N
3 ms
3 ms
3 ms
6 ms
6 ms
Typ. turn-off time for U N
9 ms
9 ms
9 ms
9 ms
9 ms
Transmission frequency flimit
10 Hz
10 Hz
10 Hz
3 Hz
3 Hz
24, 48, 60 V DC operation indicator, polarity protection diode, damping diode
Input circuit:
120, 230 V AC/DC operation indicator, bridge rectifier
Output data
Max. switching voltage
253 V AC
Min. switching voltage
24 V AC
Limiting continuous current
0.75 A (see derating curve)
Max. inrush current
30 A (10 ms)
Min. switching current
10 mA
Output connection
2 conductor floating
Output circuit
RCV wiring
Voltage drop at max. limiting continuous current
<1V
Leakage current in off condition
< 1 mA
Max. phase shift (inductive loads)
cos ϕ = 0.5
2
Max. load value I x t (t = 10 ms)
2
4.5 A s
General data
Test voltage I/O
2.5 kV, 50 Hz, 1 min.
Ambient temperature range
– 20 °C up to + 60 °C
Nominal operating mode
100 % ED
Inflammability class
V0 acc. to UL 94
Standards/regulations )
IEC 664/IEC 664 A/DIN VDE 0110,
contamination class 2, surge voltage category III,
Installation position
any
Mounting
in rows with zero spacing
3
1
) The input circuit depends on the type.
) The separating plate PLC-ATP (see info) should be installed for voltages larger than 250 V (L1, L2, L3) between identical
terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or FBST 500….
3
) The separating plate PLC-ATP (see info) should be installed for protective separation between adjacent modules. Potential
bridging is then carried out with FBST 8-PLC… or FBST 500.
4
) Further input voltages available on request.
Note:
Type of housing
Polyamide PA non-reinforced,
(see info)
color: green
Torque value of terminals (see info).
For marking systems and mounting material see CLIPLINE
2
Phoenix Contact Elektronischer Katalog
Page 2 / 3
Courtesy of Steven Engineering, Inc. Ÿ 230 Ryan Way, South San Francisco, CA, 94080-6370 Ÿ Main Office: (650) 588-9200 Ÿ Outside Local Area: (800) 258-9200 Ÿ www.stevenengineering.com
Module no:2967840 LabelId:2967840 Operator:Phoenix
18:33:58, Donnerstag, 28. Juni 2001
For marking systems and mounting material, see CLIPLINE.
The rated cross section (seeinfo) refers to
untreated conductors without ferrules.
For the protection of input and output, inductive loads must
be dampened with an effective protection circuit.
The PLC-ATP separating plate must always be installed at the
beginning and end of a PLC terminal strip.
Phoenix Contact Elektronischer Katalog
Page 3 / 3
Download