Catalog
Number
Notes
FEATURES & SPECIFICATIONS
Type
CONSTRUCTION
18-gauge steel housing finished in instrument tan color.
Hinged faceplate for easy maintenance.
Metal lamp heads with two 12-watt tungsten halogen, glass sealed-beam PAR36 lamps.
Dual-voltage input capability (120 or 277 volts)
Industrial Steel Emergency Lighting
ELECTRICAL
Current-limiting charger maximizes battery life and minimizes energy consumption. Provides low
operating costs.
Yellow AC "on" light.
Battery: Maintenance-free lead-calcium battery provides 24 watts (ELT24C) or 36 watts (ELT36C) rated
capacity for two hours.
ELT24C/ELT36C
24-hour battery recharge after 90-minute discharge.
Test switch and dual function ready/charge light (green) permit check of system operation.
Low-voltage disconnect prevents excessively deep discharge that can permanently damage the battery.
Lead-Calcium Battery
Slip-on battery terminals.
LISTINGS
UL listed. Meets UL 924, NFPA 101-1988 (current Life Safety Code), NEC and OSHA illumination standards.
ELT24C and ELT36C are approved for use in the city of Chicago (9717-E).
WARRANTY — 3-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
ORDERING INFORMATION
Series
Lead times will vary depending on options selected. Consult with your sales representative.
Example: ELT24C LD
Options
AM
VM
RO
H
LD
ELT24C
ELT36C
Ammeter
Voltmeter
Less lamp heads
8W halogen lamps
Load disconnect switch
Accessories
Order as separate catalog number.
ELA WG2
Wire guard1
ELA MSTS
Mounting shelf
EMERGENCY 2
NOTES:
1 See spec sheet ELA-WG.
2 See spec sheet ELA-RTLP-MS-VS2.
ELT-CHICAGO
ELT24C/ELT36C Industrial Steel Emergency Lighting
SPECIFICATIONS
MOUNTING
All dimensions are inches (centimeters).
Shipping weight:
ELT24C - 12.5 lbs. (5.7 kgs.)
ELT36C - 17.0 lbs. (7.7 kgs.)
ELECTRICAL
Primary Circuit
AC Input
Output Volts
Type
Volts
Amps
Watts
ELT24C
120
.167
20
277
.072
20
ELT36C
120
.167
20
277
.072
20
Watts Ouput1
1-1/2 hrs.
2 hrs.
3 hrs.
4 hrs.
6
24
24
16
12
6
36
36
24
18
Lamp heads add 5-7/8” (14.9cm)
to overall height
BATTERY
Sealed Lead-Calcium
Voltage
Shelf life2
Typical life2
Maintenance3
Optimum Temperature4
6
12 mos.
5-8 yrs.
none
600-900F
NOTES
1 Watts to 87.5% of nominal voltage.
2 At 77°F (25°C).
3 All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested
in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required
maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.
4 Optimum ambient temperature range where unit will provide rated capacity for 90 minutes. Higher and lower
temperatures affect life and capacity. Consult factory for more details.
7-7/8
(20.0)
11-5/8
(29.5)
4-3/4
(12.1)
Housing Back
5-3/4
(14.6)
3-7/8
(9.8)
1
(25.4)
1
(25.4)
LAMP SPECIFICATIONS
o
HORIZONTAL
SPACING FACTOR
20
FC
2.0
10
0
1.0
0.5
0.3
0.2
10
20
Ft.
o
30 Hx20 V
Narrow Flood
H1206
6 Volts, 12 Watts Halogen, PAR 36
1.5
1.0
VERTICAL
.5
20
10
20
0
1.0
0.5
0.3
0.2
40
28
10
60
80
SPACING
(FT)
GROSS LUMEN
OUTPUT
225
20
15
30
45
60
75
Ft.
REPLACEMENT LAMP #H7553
Spacing Factor: Indicates the proper spacing between lamps to the chosen illuminance level (fc) ± 20%.
Footcandle Curves: Show distances in feet and isocurves in footcandles.
ELT-CHICAGO-
EMERGENCY One Lithonia Way Conyers, GA 30012
Phone: 800-334-8694
Fax: 770-981-8141 www.lithonia.com
©2000-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/26/13