Spare Parts for Anhydro Spray Dryers
f o r O p t i m i z e d Pe r f o r m a n c e
All plants and equipment use components that wear out at some
point. By using original wear parts for your Anhydro spray dryer
plant, you can plan maintenance and necessary replacements with
confidence, knowing that you have significantly reduced the risk
of unscheduled downtime due to unexpected failures.
Recommended Spare Parts
All Anhydro spray dryer plant orders are accompanied by a list of
recommended spare parts for the first two years of operation. The
list includes wear parts for:
• Burners
• Fans
• Pumps
• Homogenizers
• Filters
• Atomizers
• Hammers
• Safety equipment
• CIP systems
• Valves
• Cleaning doors
Customized for Your Plant
SPX design engineers specialized in the Anhydro plants
customize the recommended spare parts list according to the
specification of the components of your new plant. Accompanying
this list is a quotation.
When ordering wear parts for the first two years of operation
This means that you buy only the parts required for your new plant,
together with your plant order, you will be sure of always having
that you have them available on site, and that the quality of the
the necessary parts within easy reach.
parts enables confident maintenance and replacement planning
SPX makes every possible effort to ensure rapid delivery of spare
parts anywhere in the world, but we cannot help you to avoid
unscheduled downtime if a maintenance check reveals a need for
replacement wear parts that you do not have in stock.
as well as a predictable spare parts budget.
Longer Term Planning
SPX will be pleased to prepare a recommended list of spare parts
in order to provide you with the assurance of optimized operation
for periods beyond the initial two years.
SPX can also make sure that your stock of recommended spare
parts is constantly up to date by shipping replacements for parts
that you have used.
The quotation will in general contain parts for:
• Burners
• Magnets
• Ignition units
• Hoses
• Sensors
• Fans
• Sealings
• Bearings
• O-rings
• Atomizers
• Vibration absorber
• See seperate list for spare parts
• Pumps
• Hammers
• Sealing
• Guide bands
• Shaft sealing
• Piston sealings
• O-rings
• Silencers
• Impellers
• O-rings
• Solenoid valves
• Homogenizers
• Plungers
• Safety equipment
• Springs
• Exhaust membranes
• Gasket kits
• Break sensors
• O-ring/U-ring kits
• Insulations
• Filters (bag filters)
• CIP systems
• Filter bags
• CIP balls
• Clamp rings
• Valves
• O-rings
• Sealing kit
• Bearing bushings
• Bearings
• Cleaning doors
• Simmerings
• Gaskets
Denmark: P: +45 7027 8222 F: +45 7027 8223 E: ft.dk.soeborg@spx.com
For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.spx.com.
SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional
data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing.
ANH-121-GB
VERSION 01/2013
ISSUED 07/2013
COPYRIGHT © 2013 SPX Corporation