Ceiling Systems and Specialty Products - USA and Canada: 800-323-7164 / Fax: 800-222-3744 / www.chicagometallic.com
belgium / denmark / the netherlands / uk / germany / france / hong kong / prc / malaysia / united arab emirates / mexico
Chicago Metallic and its logo are Registered Trademarks of Chicago Metallic Corporation.
© 2010 Chicago Metallic Corporation All Rights Reserved Printed in USA Cap-broc-0510
Literature Disclaimer: Presentations in this brochure or any other Chicago Metallic Corporation publication are correct to the best of our knowledge at time of preparation. We provide this information in an advisory capacity only. Any advisory recommendations given in our publications must
be modified to conform with local codes, conditions and specifications. We reserve all rights to amend any information published in our literature without additional notice. Chicago Metallic can not be held responsible or liable for the selection nor application of our products.
Photography by: J.K. Lawrence Photography and Dustin Shores Photography
113995 r8 CMC_Broc_Cvr.indd 1
Fast. Easy. Customer Focused.®
5/5/10 4:05:43 PM
Frisco Convention Center
Frisco, TX
Fast. Easy.
Customer Focused.®
Chicago Metallic Products:
EuroStone Sustainable Ceiling Panels
Seismic 1200 Suspension Grid System
More than a slogan, it’s plain and simply
the Chicago Metallic way of meeting
customer needs world-wide. Since1893,
our valued customers have depended
on our suspension grid, metal ceiling
and ceiling panel systems to bring their
creative projects to life. The ceiling
projects featured in this catalog are, in
many cases, the award-winning and
painstaking results of our customers
endeavors to meet their client’s needs.
We invite you to take a look inside, as we
hope you will be equally inspired.
Grid
Metal
Panel
General
Applications
Perimeter
trim
Premium
Special
Applications
Curvilinear
Acoustical
Drywall
Applications
Plank and
Panel
Utility
Seismic
Applications
Linear
Controlled
Environment
Chicago Metallic Headquarters
Chicago, IL
Chicago Metallic Product:
Ultraline™ Suspension Grid
Open
Plenum
Security
Right:
Sacred Heart Parish
Weymouth, MA
Chicago Metallic Product:
Drywall Grid/SpanFast™
Center:
Merle Norman Cosmetics
Naperville, IL
Chicago Metallic Products:
EuroStone® Sustainable Ceiling Panels
Tempra™ Grid Suspension System
Bethesda Memorial Hospital
Boynton Beach, FL
Chicago Metallic Products:
Infinity Perimeter Trim
Seismic 1200 Suspension Grid System
Grid Suspension Systems
High Recycled
Content…
for generations
to come
CMC Headquarters
Chicago, IL
Chicago Metallic Products:
EuroStone Kalypso! Sustainable Ceiling Panels
Ultraline Suspension Grid
The demand for green building designs are
on the rise, it is therefore critical that your
projects utilize products that incorporate
the use of high recycled content material.
Chicago Metallic is committed to providing
industry-leading HRC products, in all
ceiling categories. Our HRCmax™ ceiling
grid system includes 81% recycled steel in
a variety of distinct profiles.
Seismic solutions –
integral components
of a better built
environment.
American Express
Corporate Headquarters
Minneapolis, MN
Chicago Metallic Product:
Planostile Metal Panels
Though suspended ceilings are considered
non-structural, recommendations for
seismic stabilization do exist, and Chicago
Metallic has developed ICC recognized
systems that can save up to 75% in
material and labor costs.
Chicago Metallic’s Seismic Grid Systems
are a cost-effective solution that
includes seismic and fire-rated seismic
constructions to satisfy all seismic code
requirements while permitting direct
upward access to mechanical systems.
Hillier Architecture
Philadelphia, PA
Chicago Metallic Product:
Planostile Metal Panels
Zermatt Resort
Midway, UT
Chicago Metallic Product:
Drywall Grid
Metal Ceiling Systems
Metal Ceilings –
From the simple
to the sublime!
Chicago Metallic’s preeminent position in
the metal ceilings market is unparalleled.
CMC’s broad array of curving, linear, flat
metal, perimeter treatment and open
plenum designs give the designer the
tools to create projects that span from
the simple to the sublime. Architects
and designers have also trusted in
CMC’s ability to produce metal ceiling
products that are aesthetically pleasing,
installer friendly and compliant with the
most stringent standards for safety and
durability. Chicago Metallic’s expansion
of metal ceiling product lines to include
more planks, downward accessible
systems, decorative wire mesh and
resin panel systems, offer the design
community even more choices to meet
stringent budgets. Hyatt Regency
Chicago, IL
Chicago Metallic Product:
Planostile Metal Panels
Heartland Payment Systems
Service Center
Jeffersonville, IN
Chicago Metallic Products:
CurvGrid Ceiling System
Infinity Perimeter Trim
BeamGrid®
Willowcreek Community Church
South Barrington, IL
Chicago Metallic Products:
Infinity Perimeter Trim
Planostile Metal Panels
Teza Technologies
Chicago, IL
Chicago Metallic Products:
SpanAir™ Plank Metal Ceiling System
Infinity™ Perimeter Trim
Metal Ceiling Systems
Teza Technologies
Chicago, IL
Quick Ship Programs –
For a fast paced
world
Chicago Metallic Products:
SpanAir Plank Metal Ceiling System
Infinity Perimeter Trim
Today’s fast track construction cycles
require the support of manufacturer’s who
can deliver quality products in a pinch.
Chicago Metallic’s Quick Ship programs
have saved the day for project managers
from coast-to-coast. Designed with the
best features but in a simple color palette,
Quick Ship products slash as much
as 80% off the stand lead times to get
product to a project fast and easy!
University South Florida –
Marshall Student Center
Tampa, FL
Chicago Metallic Product:
Planar® Linear Metal Ceiling with MetalWood Finish
Bethesda Memorial Hospital
Boynton Beach, FL
Chrysler Plant
Marysville, MI
Chicago Metallic Products:
CurvGrid™ Ceiling System
Planostile™ Metal Panels
Infinity Perimeter Trim
Chicago Metallic Products:
Infinity Perimeter Trim
Seismic 1200 Suspension Grid System
Metal Ceiling Systems
Colors and finishes –
A broad palette
for interior
and exterior beauty
About Family Fitness
Coral Springs, FL
Chicago Metallic Product:
CurvGrid Ceiling System
No matter the effect you seek for your
ceiling design, Chicago Metallic is
uniquely capable of bringing it to life. We
recognize the value of offering contrasting
colors or the visual impact of uniformity
in color from one ceiling component to
another; our colors and laminates will do
this and more. With our broad range of
painted and metallic colors, laminates,
and wood grain finishes, your design is in
good hands.
Visitors Information Bureau
San Antonio, TX
Chicago Metallic Product:
Traditions™ Embossed Ceiling Panels
Right:
Christiana Mall
Newark, DE
Chicago Metallic Products:
Planar MacroPlus Linear Metal Ceiling with
MetalWood finish
SpanAir Plank Metal Ceiling System
Infinity Perimeter Trim
Planostile Metal Panels
Metro Transit Downtown Center
Oklahoma City, OK
Center:
Benefis Healthcare
Great Falls, MT
Chicago Metallic Products:
Planostile Metal Panels
CurvGrid Ceiling System
Infinity Perimeter Trim
MetalWood™ and custom wood finishes
Chicago Metallic Product:
Planar Macro Linear Metal Ceiling
with MetalWood Finish
Metal Ceiling Systems
Acoustical correction –
better environments
for living, learning
and listening
Chrysler Plant
Marysville, MI
Chicago Metallic Products:
Planostile Metal Panels
Infinity Perimeter Trim
Schools, offices, retail projects, galleries
and waiting rooms must all consider
acoustical performance if they are to meet
the well-being of the occupants. The fact
is that managing acoustics in any built
environment is essential to maximizing
comfort, interpersonal communication
or performance productivity. Today’s
ceilings, through science can with
optional features, help your project to
support speech intelligibility or quell the
clamor of a night time crowd.
Taylor-Morley Homes Design Gallery
Chesterfield, MO
Open Plenum designs –
A minimalists dream
come true
Chicago Metallic Product:
BeamGrid
Chicago Metallic Open Plenum ceiling
designs elevate the philosophy of “less
is more” to an entirely new plane. Plenum
masking, wire mesh panels in stainless
or carbon steel and 360 degree painted
suspension systems add life to ceiling
spaces. Available in a wide array of
configurations, Open Plenum systems are
a minimalists dream!
Grupo Imagen Office Building
Mexico City, MX
Winthrop University –
Thurmond Auditorium
Rock Hill, SC
Chicago Metallic Product:
CurvGrid Custom Ceiling
Chicago Metallic Products:
Intaline™ Baffle
Magna™ T-Cell
Infinity Perimeter Trim
Planostile Metal Panels
EuroStone Sustainable Ceiling Panels
Ceiling Panel Systems
Ceiling Panel Systems
that support
the highest IAQ
Dolphins Stadium
Miami, FL
Chicago Metallic Products:
EuroStone Sustainable Ceiling Panels (Terric)
Tempra Grid Suspension System
As a critical building component that
can affect light, air flow and acoustical
performance, ceilings must also do their
part to enhance indoor environmental
quality. By design Chicago Metallic ceiling
systems contribute to this important building
factor by resisting sag, the formation of
mold and mildew, and by avoiding the
introduction of harmful fibers or VOC’s
to the environment. These benefits have
contributed to the long-term value of not
only LEED Certified projects but non-LEED
projects as well.
Holiday Inn
Skokie, IL
Chicago Metallic Products:
Monarch™ GE Ceiling Panels
Tempra Grid Suspension System
University of Texas –
Health Science Center
Houston, TX
Chicago Metallic Products:
EuroStone Sustainable Ceiling Panels (Novum)
Tempra Grid Suspension System
DePaul University – Ray Meyer Center
Chicago, IL
Chicago Metallic Product:
EuroStone Sustainable Ceiling Panels
Ceiling Systems and Specialty Products - USA and Canada: 800-323-7164 / Fax: 800-222-3744 / www.chicagometallic.com
belgium / denmark / the netherlands / uk / germany / france / hong kong / prc / malaysia / united arab emirates / mexico
Chicago Metallic and its logo are Registered Trademarks of Chicago Metallic Corporation.
© 2010 Chicago Metallic Corporation All Rights Reserved Printed in USA Cap-broc-0510
Literature Disclaimer: Presentations in this brochure or any other Chicago Metallic Corporation publication are correct to the best of our knowledge at time of preparation. We provide this information in an advisory capacity only. Any advisory recommendations given in our publications must
be modified to conform with local codes, conditions and specifications. We reserve all rights to amend any information published in our literature without additional notice. Chicago Metallic can not be held responsible or liable for the selection nor application of our products.
Photography by: J.K. Lawrence Photography and Dustin Shores Photography
113995 r8 CMC_Broc_Cvr.indd 1
Fast. Easy. Customer Focused.®
5/5/10 4:05:43 PM
perimeter trim
09 53 13
Infinity™
product guide
Fast. Easy. Customer Focused.®
USA and Canada: 800.323.7164 / fax: 800.222.3744
Infinity Perimeter Trim
1
Contents
03
Infinity™ Perimeter Trim
04.......Quick Ship Program
05.......Infinity Engineered (Straight Edge)
06.......Infinity R (Reveal Edge)
06.......Infinity Z (Razor Edge)
06.......Accessories
07
Reflected Ceiling Plans
08
System Integration
09
Specification Data
10
Infinity Specification
11
General Conditions of Sale Product Updates
Up-to-date, time stamped product information is
always available on the web
chicagometallic.com/infinity
PRODUCT
chicagometallic.com
UPDATES
Service
Color Samples
1. Custom color matching requires customer color sample
or paint manufacturer and color number.
2. Chicago Metallic Corporation (CMC) will provide color
sample for approval upon request.
3. Service Level begins after receipt of color approval.
Order Review
Requests for technical information on CMC Metal Ceilings
may be placed with the Technical Services Department.
Phone: 1.800.323.7164 option 3
Fax:
1.888.329.2620
Email: techservices@chicagometallic.com
Mockups and Custom Samples
Customer Service direct: 1.800.323.7164 / option 1.
When CMC has agreed to provide custom samples or
mockups, the cost for them will be billed to the account.
CMC will issue credit for all mockups and custom sample
invoices when valid orders for these products are placed
with our Customer Service Department.
Order Placement
Orders to be faxed to 1.866.211.3824.
Standard Samples and Literature
Standard literature, product samples and color samples are
available from the CMC Sample and Literature department
at no charge.
Phone: 1.800.323.7164/ option 2
Fax:
1.800.222.3744
Email: cmc-customerservice@chicagometallic.com
2
Technical Support
Phone: 1.888.991.7070
Fax:
1.866.211.3824
Email: cmc-customerservice@chicagometallic.com
To Place Orders
Phone: 1.800.323.7164 option 1
Fax:
Infinity Perimeter Trim
1.866.211.3824
chicagometallic.com
Infinity™
perimeter trim
Splice Plates
Convex Curve
Applications
Ideal for hospitals, hospitality, retail, airports, offices,
schools. Create light coves, floating islands or accents.
H
Engineered, R (Reveal Edge)
and Z (Razor Edge)
Features
• Infinity profiles are available in straight and curved
heights from 2 to 12.
#430 Clip
(2 pc)
/4
3
Infinity Engineered
Ceiling Grid
• Infinity R profile with continuous reveal.
• Infinity Z simulates a 0 depth ceiling.
• Attractive, smooth, rust- and distortion-free
perimeter.
• Sturdy extruded aluminum.
• Integrates with standard grid and other ceiling
systems.
H
• Metal contains no organic compounds to support
mold and microbial growth.
• “QuickShip” standard sizes, or engineered to project
specifications.
• Straight or curved profiles can be paired for specific
applications.
• Available factory painted 180°, 360°, or with ready
for field painting surface.
3/4
11/16
Infinity R
(Reveal Edge)
2
6
Infinity Z (Razor Edge)
USA and Canada: 800.323.7164 / fax: 800.222.3744
Infinity Perimeter Trim
3
Quick Ship Program
Product
Number
Length
Dimensions
Height
Face
Feet
Per Order
Pieces Weight/LF
Trim (Splices and Clips not included - sold separately)
Straight
01470Qxx
12
2
3
/4
Per Order
0.25
01471Qxx
12
4
3
/4
Per Order
0.55
01472Qxx
12
6
3
/4
Per Order
0.92
01473Qxx
12
8
3
/4
Per Order
1.1
01475Qxx
12
10
3
/4
Per Order
1.42
Note: Pricing does not include splices and clips.
Straight Trim
01470Q/01471Q
/01472Q/01473Q/01475Q
Factory Mitered Corner Kits (unassembled)
2 kit contains: Two (2) 12 Straight Trim pieces with mitered corners; one (1) Corner Splice; two (2) Straight Splices.
4, 6, and 8 kit contains: Two (2) 12 Straight Trim pieces with mitered corners; two (2) Corner Splices; four (4) Straight Splices.
10, and 12 kit contains: Two (2) 12 Straight Trim pieces with mitered corners; three (3) Corner Splices; six (6) Straight Splices.
Inside Corners 90°
Inside Corner 90°
01471IM / 01472IM / 01473IM
01470IM01
1
2
3
/4
Per Order
01470IM44
1
2
3
/4
Per Order
01471IM01
1
4
3
/4
Per Order
01471IM44
1
4
3
/4
Per Order
01472IM01
1
6
3
/4
Per Order
01472IM44
1
6
3
/4
Per Order
01473IM01
1
8
3
/4
Per Order
01473IM44
1
8
3
/4
Per Order
01475IM01
1
10
3
/4
Per Order
01470TM01
1
2
3
/4
Per Order
01470TM44
1
2
3
/4
Per Order
01471TM01
1
4
3
/4
Per Order
01471TM44
1
4
3
/4
Per Order
01472TM01
1
6
3
/4
Per Order
01472TM44
1
6
3
/4
Per Order
01473TM01
1
8
3
/4
Per Order
01473TM44
1
8
3
/4
Per Order
01475TM01
1
10
3
/4
Per Order
414.00 Joins trim together
Per Order
Outside Corners 90°
Outside Corner 90°
01471TM / 01472TM / 01473TM
Splice Plate
414
For 12 Corner Kits, see Accessories, pg. 6.
Accessories
Splice Plate
Corner Splice Plates
417-429
Corner Splice Plates
417.00Joins trim at inside corners
Per Order
429.00Joins trim at outside corners
Per Order
Grid Clip
Grid Clip
430
4
430.00Joins grid to panel (2 parts)
Infinity Perimeter Trim
Per Order
chicagometallic.com
Infinity™ Engineered (Straight Edge)
Product
Number
Length
Dimensions
Height
Face
Feet
Per Order
Pieces Weight/LF
System
Straight – Includes Trim, Splice Plates and Grid Clips
Straight Trim
01470S/01471S /01472S/01473S/
01475S/1474S
01470S.xx
12
2
3
/4
Per Order
0.25
01470S.xx
12
2
3
/4
Per Order
0.25
01471S.xx
12
4
3
/4
Per Order
0.55
01471S.xx
12
4
3
/4
Per Order
0.55
01472S.xx
12
6
3
/4
Per Order
0.92
01472S.xx
12
6
3
/4
Per Order
0.92
01473S.xx
12
8
3
/4
Per Order
1.1
01473S.xx
12
8
3
/4
Per Order
1.1
01475S.xx
12
10
3
/4
Per Order
1.42
01475S.xx
12
10
3
/4
Per Order
1.42
1474S.xx
12
12
3
/4
Per Order
1.84
1474S.xx
12
12
3
/4
Per Order
1.84
Curved – Includes Trim, Splice Plates and Grid Clips
Curved Trim
01470C/01471C
/01472C/01473C/01475C/1474C
01470C.xx
Varies
2
3
/4
Per Order
0.25
01470C.xx
Varies
2
3
/4
Per Order
0.25
01471C.xx
Varies
4
3
/4
Per Order
0.55
01471C.xx
Varies
4
3
/4
Per Order
0.55
01472C.xx
Varies
6
3
/4
Per Order
0.92
01472C.xx
Varies
6
3
/4
Per Order
0.92
01473C.xx
Varies
8
3
/4
Per Order
1.1
01473C.xx
Varies
8
3
/4
Per Order
1.1
01475C.xx
Varies
10
3
/4
Per Order
1.42
01475C.xx
Varies
10
3
/4
Per Order
1.42
1474C.xx
Varies
12
3
/4
Per Order
1.84
1474C.xx
Varies
12
3
/4
Per Order
1.84
USA and Canada: 800.323.7164 / fax: 800.222.3744
Infinity Perimeter Trim
5
Infinity R and Z
Product
Number
Length
Dimensions
Height
Face
Feet
Per Order
Pieces Weight/LF
Infinity R (Reveal Edge)
Straight – Includes Panels, Splice Plates and Grid Clips
04571S.xx
12
4
3
/4
Per Order
0.80
* Service Level applies to 01 White, 08 Black, 44 Satin Silver Metallic. Service Level is 4 for Other Colors.
Infinity R
04571S/04572S
Infinity Z (Razor Edge)
Straight – Includes Panels, Splice Plates and Grid Clips
04770S.xx
12
11/2
6
Per Order
1.00
Note: Corners available minimum 45 degrees, maximum 135 degrees.
Infinity Z
04770S
Accessories
Product
Number
Description
Per Order
Pieces Weight
Paired Infinity Bracket
446.36.00 Joins Infinity 2 1/4 apart with 3/4 opening between panels Per Order
446.46.00 Joins Infinity 2 7/8 apart with1 3/8 opening between panels Per Order
Note: One clip required at top and at bottom of Infinity panel, maximum 24 on center.
Paired Infinity Bracket
446.36.00
Horizontal Splice Plate
447.00
Adjustable Corner Splice Plate for Infinity Z Per Order
Horizontal Splice PLate
447.00
6
Infinity Perimeter Trim
chicagometallic.com
Reflected Ceiling Plans
Infinity Engineered
Diagonal corner
Splice
Diagonal corner
Infinity™
perimeter
trim
Ceiling system
Grid to trim
Concave curve
Outside corner
Inside corner
Convex curve
Infinity R (Reveal Edge)
Infinity™ R perimeter trim
Grid to trim
Splice
Ceiling system
Outside corner
Inside corner
Diagonal corners
Infinity Z (Razor Edge)
Infinity™ Z perimeter trim
Grid to trim
Splice
Ceiling system
Outside corner
Inside corner
Diagonal corners
USA and Canada: 800.323.7164 / fax: 800.222.3744
Infinity Perimeter Trim
7
System Integration
Infinity Engineered
Trim
Infinity R (reveal edge)
Infinity Z (razor edge)
Infinity Paired Trim
Trim
430 Grid clip
430 Grid clip
430 Grid clip
Trim
Ceiling Grid
Ceiling Grid
Ceiling Grid
Grid to trim
Grid to trim
Grid to trim
Grid and ceiling panel
Grid and ceiling panel
Grid and ceiling panel
Paired Infinity at
Hanger Wire
Planostile-lay-in square
Planostile™ lay-in square
Planostile-lay-in reveal
Planostile™ lay-in reveal
Planostile-snap-in
Planostile™ snap-in
Magna T-Cell
Magna T-Cell™
CubeGrid™ and GraphGrid™
8
Infinity Perimeter Trim
chicagometallic.com
Specification Data
Product information for integration into ceiling specification
suspension type Infinity
Quick
Ship
Infinity
Engineered
R
Reveal
Z
Razor
material
extruded aluminum
•
•
•
•
surface
painted on exposed surfaces
•
•
•
•
painted 360 (optional)
•
•
•
primed
size
heights: 2, 4, 6,
8, 10
2, 4, 6
8, 10, 12
4
6
lengths: 12 standard and made to order
12
•
•
•
straight
•
•
•
•
curved to minimum 18 radius
•
paired option
•
fire
class A: flame 0, smoke 0 per ASTM E 84
•
•
•
•
performance
standard to harsh interior environment
•
•
•
•
suspension
9/16, 15/16, 1-3/8
•
•
•
•
concealed snap-bar, drywall, linear
•
•
•
•
warranty
1 year limited
•
•
•
•
sustainability
100% recycled post consumer content,
100% locally recyclable
•
•
•
•
Colors
°
Standard Painted Colors
01 White
08 Black
44 Satin Silver
Premium Painted Colors
21 Copper Metallic
23 Sandstone
379 Gloss White
386 Gloss Black
431 Whitewash
520 Polar White
521 Nickel
524 Silver
510 Morning Dew Metallic
511 Autumn Metallic
512 Moon Glow Metallic
513 Sun Gold Metallic
514 Harvest Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
Other _____________________
WoodScenes™ Painted Colors
800 Lazy Maple
801 Aged Teak
802 Vintage Burlwood
803 Burnished Cherry
804 Sleek Cherry
805 Weathered Oak
Coordinating Solid Paint Colors to
MetalWood® II Finishes
401 Maple
402 Oak
403 Cherry
404 Pumpkin Maple
405 Karri
USA and Canada: 800.323.7164 / fax: 800.222.3744
Infinity Perimeter Trim
9
Specification
PART 1 - GENERAL
1.01 Scope
Provide metal suspension trim for ceiling island or fascia.
1.02 Related Sections
A. Section 09 22 26 - Suspension Systems
B. Section 09 29 00 - Gypsum Board
C. Section 09 54 00 - Specialty Ceilings
D. Section 09 58 00 - Integrated Ceiling Assemblies
E. Section 13 48 00 - Sound, Vibration, and Seismic Control
F. Section 23 50 00 - Central Heating Equipment
G. Section 26 50 00 - Lighting
2. 3. C. 1.
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C423 - Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
2. C635 - Standard Specification for the manufacture, performance, and testing
of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
3. C636 - Standard Practice for Installation of Metal Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels.
4. E 84 - Test Method for Surface Burning Characteristics of Building Materials.
5. E 1264 - Classification for Acoustical Ceiling Products.
6. E 1477 - Standard Test Method for Luminous Reflectance Factor of Acoustical
Materials by Use of Integrating-Sphere Reflectometers.
1.04 Submittals
A. Product data sheets listing dimensions and standard compliance.
B. Samples: Representative sample of color and finish of all exposed materials.
C. Shop Drawings: Reflected ceiling plans to indicate trim locations, radii, and
part numbers.
D. Approval drawings indicating ceiling layout and manufacturers details submitted
and approved prior to manufacture of components.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area to receive suspension system prior to installation.
2. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and
occupied.
3. Heating and air conditioning systems to be operating prior to, during, and
after installation.
4. Deliver materials in manufacturers original packaging, unopened and undamaged.
5. Store materials in an enclosed dry location at room temperature and protect
from soiling, damage, moisture and humidity.
1.06 Maintenance
Furnish additional material equal to _____ percent of ceiling area.
D. 1.
E. 1.
Infinity R Reveal profile perimeter trim for T-bar type grid acoustical ceilings
(4) inch high with 3/4 inch wide horizontal face and 1/2 inch wide x 3/4 inch
deep continuous open reveal. Panels to be straight as indicated on approved
drawings. All corners to be factory mitered. Finish to be factory applied paint
(on outside surface)(360°)(01 White)(other color ______).
Infinity Z Razor profile for T-bar type grid acoustical ceilings, 6 inch wide horizontal face by 1-1/2 inch high. Panels to be straight as indicated on approved
drawings. All corners to be factory mitered maximum 45 degrees. Finish to
be factory applied paint on outside surface (01 White)(other color____).
Splice Plate:
Manufactured from galvanized steel with set screw for splicing sections of
perimeter trim.
Grid Clips:
Manufactured from galvanized steel with set screw for attaching perimeter
trim to suspension system members.
Paired Bracket:
Manufactured from electro-galvanized steel and used for back-to-back Infinity
installations. Size bracket to maintain panel vertical surfaces (2-1/4 inch apart
with 3/4 inch opening at bottom) (2-7/8 inch apart with 1-3/8 inch opening at
bottom) (____ inches apart).
PART 3 - EXECUTION
3.01 Examination
Examine area receiving system to identify conditions which will adversely affect
installation. Do not begin installation until adverse conditions have been remedied.
3.02 Preparation
A. Verify actual field dimensions prior to installation.
B. Verify adequate support for Infinity Perimeter Trim prior to installation.
C. Infinity for drywall sections to be cleaned on site prior to field painting.
3.03 Installation
A. Infinity Perimeter Trim:
1. Install after completion of above ceiling work.
2. Install ceiling suspension system as specified and in accordance with ASTM
C636.
3. Install Infinity perimeter trim in accordance with manufacturers printed instructions and details and approved shop drawings.
4. Infinity perimeter trim to be supported by ceiling grid suspension system.
5. Attach splice plates and tighten set screws to join perimeter trim.
6. Attach trim to main tees and/or cross tees with grid clips. Field measure and
cut tees to length. Attach grid clips to perimeter trim by inserting into grooves
and firmly tighten set screw. Attach grid clips to main tees and cross tees
with sheet metal fasteners (by contractor).
7. Field paint Infinity for drywall sections after drywall, taping, joint compound
and sanding is complete.
3.04 Field Quality Control
A. Maximum defection not to exceed 1/360 of the span.
PART 2 - PRODUCTS
2.01 Manufacturers
Infinity perimeter trim by Chicago Metallic, 4849 South Austin Ave, Chicago IL
60638. 1-800-323-7164.
2.02 Materials
A. Panels:
1. Manufactured from extruded 6063-T5 aluminum complete with continuous
integral slots for attachment of splice plates and grid clips.
B. Profile:
1. Infinity profile perimeter trim for T-bar type grid acoustical ceilings (2)(4)(6)
(8)(10)(12) inch high with 3/4 inch horizontal face. Panels to be (straight)
(and)(curved) as indicated on approved drawings. (All corners to be factory
mitered) (90 degree corner kits are allowed in place of mitered corners on
straight sections). Finish to be factory applied painted finish (on outside
surface)(360 degrees)(01 White)(other color ______).
10
Infinity Perimeter Trim
chicagometallic.com
General Conditions of Sale
Order Acceptance
Whenever used herein, “Seller” shall refer to Chicago Metallic Corporation and
“Purchaser” shall refer to the party ordering or purchasing products (“Products”)
from Seller.
Seller’s price list does not constitute an offer to sell Products listed therein, but is
simply provided as a convenience to prospective Purchasers.
Purchaser’s order to Seller shall constitute an offer to Seller to purchase Products
which offer Seller may accept at its sole discretion. Acceptance shall be by a writing
containing these General Conditions of Sale (“Conditions”). Acceptance of Purchaser’s
order or any part of it by Seller is expressly made conditional on Purchaser’s assent
to these Conditions. Purchaser may vary these Conditions only with the written
consent of Seller. Acceptance of Products by Purchaser or failure of Purchaser
to object in writing to these Conditions within ten (10) days following delivery of
Products to Purchaser shall constitute Purchaser’s assent to these Conditions.
Shipment and Delivery
Seller shall deliver Product F.O.B. place of shipment. Risk of loss to Product shall
pass to Purchaser upon delivery to carrier at such place of shipment. Carrier
acts as Purchaser’s agent. Products shall be shipped as soon as practical, or as
requested by Purchaser after order acceptance by Seller. However, delivery dates
shall not be of the essence, but shall be regarded as Seller’s best approximation
of such delivery dates.
Prices of Freight Costs
Unless otherwise indicated, prices shown on Seller’s price list are for less than
truckload quantities. The minimum truckload quantity is 24,000 pounds. Prices are
subject to change without notice and are based on full carton quantities. Prices shall
be those in effect at time of shipment of Products.
Seller shall grant Purchaser a freight allowance on all orders of 12,000 pounds or
more for a single shipment to a single destination. The allowance shall be based
on the lowest rates currently in effect from actual shipping point to destination
point or nearest port of export. In no event shall the allowance be greater than the
actual freight cost of a specific shipment. Purchaser’s request for costlier means of
shipment will be honored, but Purchaser shall be liable to Seller for the additional
freight expense. Purchaser “will-call” orders at Seller’s plant warehouse shall not
be entitled to allowance.
All taxes, tariffs, duties or similar charges paid by Seller imposed or levied by any
governmental authority in connection with the purchase, shipment, import or export
of Products purchased or in connection with the procuring of materials used therein
may at Seller’s sole option be added to the price of Products so affected. Additional
shipping charges for Products paid by Seller such as destination, storage, labor
and redelivery and special or extra expenses for handling air freight, bus or other
shipments may also, at Seller’s sole option, be added to the price of such Products.
to delivery by Seller of Products F.O.B. place of shipment, and (5) Purchaser does
not alter, repair, use or attempt to alter or repair any non-conforming Products. This
limited warranty is Seller’s only and exclusive express warranty to Purchaser. Seller
disclaims any and all implied warranties including without limitation any implied
warranty of merchantability or fitness for a particular purpose.
Purchaser’s sole and exclusive remedy against Seller shall be the replacement
F.O.B. its plant or site, at Seller’s option, of any Products which do not conform to
Seller’s limited warranty hereunder. No other remedy (including, without limita­tion,
incidental or consequential damages for lost profits, lost sales, injury to persons or
property or any other incidental or consequential loss) shall be available to Purchaser.
Purchaser agrees to include in all contracts between Purchaser and subsequent
owners or users of Products, and to bring to the attention of all Purchaser’s customers of Products, the following warranty disclaimer: Chicago Metallic Corporation
disclaims any and all warranties expressed or implied, including, without limitation,
any implied warranty of merchantability or fitness for a particular purpose. Purchaser
shall be excluded on behalf of Seller all remedies for damage or injury to Products
persons or property. In the event that Purchaser fails to comply with the foregoing
obligations, Purchaser shall indemnify Seller for any liability resulting from such
non-compliance and shall otherwise hold Seller harmless.
Returns
In order to return any Products to Seller, Purchaser must first obtain prior authorization
for products eligible for return, and receive a Return Goods Authorization number
from Seller’s home office. All authorized returns are subject to a 20% restocking
charge. Seller will only issue credit for Service Level “0” material received at the
designated company facility with the Return Goods Authorization appearing on the
material, and after being inspected and determined by Seller to be in resalable
condition. Purchaser is solely responsible for arranging and prepaying for all return
freight. Seller will not be responsible for any damage in transit on material returned
at customer’s request, and will not file freight claims on such damaged material.
When these terms are met, seller will issue appropriate material credit less the
restocking charge.
Default, Termination and Suspension of Delivery
Seller reserves the right, among other remedies, either to cancel Purchaser’s order or
suspend further deliveries of Products thereunder in the event that (1) Purchaser fails
to pay for any one shipment of Products when payment for such shipment becomes
due; (2) Purchaser fails to make any advance payments or satisfactory security
demanded by Seller pursuant to paragraph two of PAYMENTS section above; or (3)
Purchaser fails or refuses to accept any delivery of Products ordered from Seller.
Delivery of Products may be suspended in whole or in part in case of any event
beyond Seller’s control, including, but not limited to, explosion, fire, shortage of
fuel, power or raw materials flood strike lockout, injunction, riot, insurrection, war,
national emergency, government act, or act of God.
Payment
Miscellaneous
If, in Seller’s sole opinion, the financial condition of the Purchaser so warrants, Seller
may require advance payments or satisfactory security. In the event that the Purchaser fails to make such advance payments or furnish such security upon Seller’s
request, delivery of Products may be suspended without further Seller obligation.
The parties hereto may correct stenographic and clerical errors without liability.
Payment for all Products shall be net cash due and payable in U.S. dollars within thirty
(30) days following receipt by Purchaser of shipping documents for such Products
by check or bank transfer to a bank account to be designated by Seller. If accounts
are paid within ten (10) days following receipt by Purchaser of the corresponding
shipping documents, Purchaser shall been entitled to a one percent (1%) discount
from the price of Products only.
Seller may, at Seller’s sole option, require payment by means of an irrevocable
letter of credit opened and confirmed by a bank or banks acceptable to Seller and
upon terms and conditions acceptable to Seller.
Limited Warranty
Seller warrants to Purchaser that Products will substantially conform in quantity
and quality to Purchaser’s order, as accepted by Seller, provided, however, that (1)
Products are inspected by Purchaser upon arrival at place of destination and any and
all nonconformities are noted on the bill of lading and all other delivery documents
and are attested to in writing by carrier’s representative (2) Purchaser furnishes
Seller with written notice of such non-conformities within fifteen (15) days following
arrival of non-conforming Products at the place of destination, (3) Purchaser holds
non­conforming Products for Seller’s inspection (4) non-conformities occurred prior
USA and Canada: 800.323.7164 / fax: 800.222.3744
No failure or delay on the part of Seller in exercising any right, power or privilege
hereunder shall operate as a waiver thereof or of any other right, power or privilege hereunder nor shall any single or partial exercise of any such right power or
privilege preclude any other right, power or privilege. The rights or remedies of
Seller hereunder are cumulative and not exclusive of any rights or remedies which
it may otherwise have.
Purchaser may not assign the order without the express written consent of Seller.
All notices to be given hereunder by either party to the other party shall be dispatched
by certified or registered mail return receipt requested addressed to the last known
post office address of such other party. Any such notice shall be deemed received
within five (5) days following any such dispatch if mailed from within the United States
of America and ten (10) days if mailed from outside the United States of America.
Either party may change its address by notice to the other party.
These Conditions shall be governed by and interpreted in accordance with the laws
of the State of Illinois, United States of America, and all disputes hereunder that
cannot be amicably resolved by the parties thereto must be settled in a court of
competent jurisdiction within the State of Illinois, United States of America.
The provisions of these Conditions shall be severable one from the other so that
should any provision be held legally unenforceable by a court of competent jurisdic­
tion, the remaining provisions shall remain in effect.
Infinity Perimeter Trim
11
Ceiling Systems and Specialty Products - USA and Canada: 800.323.7164 / Fax: 800.222.3744 / www.chicagometallic.com
belgium / denmark / the netherlands / uk / germany / france / hong kong / prc / malaysia / united arab emirates / mexico
Chicago Metallic and its logo are Registered Trademarks of Chicago Metallic Corporation. Infinity, MetalWood and WoodScenes are trademarks of Chicago Metallic Corporation.
© 2011 Chicago Metallic Corporation All Rights Reserved Printed in USA SNL0142A2011
12
Literature Disclaimer: Presentations in this brochure or any other Chicago Metallic Corporation publication are correct to the best of our knowledge at time of preparation. We provide this information in an advisory capacity only. Any advisory recommendations given in our publications must
be modified to conform with local codes, conditions and specifications. We reserve all rights to amend any information published in our literature without additional notice. Chicago Metallic can not be held responsible or liable for the selection nor application of our products.
Infinity Perimeter Trim
chicagometallic.com
M
Metaline /Securline
™
®
PRODUCT GUIDE
›
Se c u r l i n e ® / 0 95753
Metaline
lock-down
M E TA L : M eta l i n e ™
16
Securline
plank
15
23 4
THE SAFEST
CHOICE
IS SOMETIMES THE MOST AESTHETIC
Panel
Grid
Channels
Metaline
Metaline
APPLICATIONS
• Industry standard security ceiling providing
access resistance in supervised areas.
FEATURES
• Range of panel sizes and material thickness.
• Washable baked-on enamel finish.
• Panels continuously lock under the bulb
of heavy duty Metaline grid.
BENEFITS
• Meet strength and environmental
requirements.
• Economical and durable.
• Adjust acoustical performance to provide
noise control.
Securline
Securline
APPLICATIONS
• Access and abuse resistant security ceiling
for unsupervised and supervised rooms and
corridors in correctional facilities.
FEATURES
• Galvanized steel in thickness from
18 to 12 gage.
• Washable baked-on enamel finish, overlapping
planks and heavy duty channels.
BENEFITS
• Meets strength and environmental
requirements.
• Adjust acoustical performance to provide
noise control.
For more detailed product information, visit:
chicagometallic.com/metaline
chicagometallic.com/securline
800.323.7164 | chicagometallic.com
Plank
Perforation Code Key
SAMPLE NO. 109R281D
109 – Hole size in 1/1000 inches (0.109")
R
– R = Round hole
S = Square hole
281 – Hole spacing in 1/1000 inches (0.281")
D
– D = Diagonal pattern (45°)
L = Linear pattern (straight)
S = Staggered pattern (60°)
109R281D
( Metaline)
125R250D
(Securline)
Perforation Patterns (optional)
Accoustical Security Panel
Ceilings
2.02 PRODUCTS
SPECIFICATIONS
panel type
material
painted 0.040" aluminum
painted 20 gauge galvanized steel
painted 18 gauge galvanized steel
Metaline
Securline
lock-down
plank
•
•
•
•
painted 16, 14, 12 gauge galvanized steel
surface
solid and perforated
size
1' x 2', 2' x 2', 2' x 4'
•
•
•
•
•
•
•
0.90
0.90
•
•
•
•
•
1' x 10' standard, also non-standard lengths
edge
square
fire
class A: flame 0, smoke 0 per ASTM E 84
sound
NRC - perforated with 1 1/2" fiberglass acoustical pad
performance
supervised areas
unsupervised areas
•
•
•
interior applications
exterior soffits
suspension
1
15/16" heavy duty Metaline grid
3 1/2" heavy duty channels
classification
type XX, pattern C, G per ASTM E 1264
warranty
20 year limited
sustainability
75% - 100% recycled content, 100% locally recyclable
•
•
•
•
•
•
•
•
•
•
1 - Consult with an engineer to evaluate the suitability of the system
for the intended application.
M
STRENGTH
chicagometallic.com | 800.323.7164
Sy m b o l I.D. Key
Listed by Underwriter’s
Laboratories and/or ITS/
Warnock-Hersey for use
in fire rated assemblies.
Unlimited array of
Chicago Metallic and
custom colors.
Manufactured from
up to 100% recycled
material or are recyclable.
Detailed product
information is available
in reference binder.
Products have a
limited warranty.
C h i c a g o M eta l l i c P ro d u c t Ca te g o r i es
Metal & Curved Ceilings
open plenum / metal panel / linear metal / curved grid / metal baffles / perimeter trim / security
Acoustical, Sustainable
& Sanitary Panels
perlite / fiberglass / glass reinforced gypsum / melamine / mineral fiber / fiber reinforced plastic /
Ceiling Grid Systems
traditional / designer / performance / drywall / curved drywall / pre-finished drywall track / access doors
Trims & Reveals
wall / corner / ceiling / base / door / window
M
P
vinyl face gypsum
G
T
Ceiling Systems and Specialty Products - U.S. and Canada: 800.323.7164 / Fax: 800.222.3744 / chicagometallic.com
CHICAGO / BALTIMORE / LOS ANGELES / BELGIUM / DENMARK / THE NETHERLANDS / UK / GERMANY / FRANCE / HONG KONG / PRC / MALAYSIA / UNITED ARAB EMIRATES / MEXICO
Sa m p l e re q u ests :
U.S. and Canada: 800.323.7164 (ext 4580) / Fax: 800.222.3744 / cmchelp@chicagometallic.com
Chicago Metallic, its logo, and Securline are Registered Trademarks of Chicago Metallic Corporation. Metaline is a Trademark of Chicago Metallic Corporation.
Literature Disclaimer: Presentations in this brochure or any other Chicago Metallic publication are correct to the best of our knowledge at time of preparation. We provide this information in an advisory capacity only. Any advisory recommendations given
in our publications must be modified to conform with local codes, conditions and specifications. We reserve all rights to amend any information published in our literature without additional notice. Chicago Metallic can not be held responsible or liable
for the selection nor application of our products.
© 2004 Chicago Metallic Corporation All Rights Reserved MPG-Security-1004 Printed in USA
Open Plenum
Metal Ceiling Systems
open plenum
metal ceiling
09 54 13
product guide
Fast. Easy. Customer Focused.®
Contents
System Selection
03
Magna T-Cell™ Open Cell
04.......Panel Configurations
04.......Assembled Panels
05.......Suspension
06.......Accessories
07
Intaline Baffle
08.......Baffles
09.......Suspension
10.......Accessories
11
CubeGrid™ Open Plenum Grid
MetalScapes™ Wire Mesh Panels
16
GraphGrid™ Open Wire Ceiling Panel
16
System Integration
17
Specification Data
18
Specifications
18.......Magna T-Cell
19.......Intaline
20.......CubeGrid
20.......GraphGrid
21.......BeamGrid
22.......MetalScapes
23
General Conditions of Sale ™
12.......15/16 Face 360° (Stab)
Finished Components
13
14
BeamGrid™ Open Plenum Beam
Product Updates
chicagometallic.com/magnatcell
Up-to-date, time stamped product information is
always available on the web
chicagometallic.com/intaline
chicagometallic.com/cubegrid
PRODUCT
chicagometallic.com/beamgrid
chicagometallic.com
chicagometallic.com/graphgrid
UPDATES
chicagometallic.com/metalscapes
Service
Color Samples
Technical Support
1. Custom color matching requires customer color sample
or paint manufacturer and color number.
2. CMC will provide color sample for approval upon request.
3. Service Level begins after receipt of color approval.
Requests for technical information on CMC Metal Ceilings may
be placed with the Technical Services Department.
Order Review
Phone: 1.800.323.7164 option 3
Fax:
1.888.329.2620
Email: techservices@chicagometallic.com
Customer Service direct: 1.800.323.7164 / option 1.
Mockups and Custom Samples
Order Placement
When CMC has agreed to provide custom samples or
mockups, the cost for them will be billed to the account. CMC
will issue credit for all mockups and custom sample invoices
when valid orders for these products are placed with our
Customer Service Department.
Orders to be faxed to 1.866.211.3824.
Standard Samples and Literature
Standard literature, product samples and color samples are
available from the CMC Sample and Literature department
at no charge.
Phone: 1.800.323.7164/ option 2
Fax:
1.800.222.3744
Email: cmc-customerservice@chicagometallic.com
Phone: 1.888.991.7070
Fax:
1.866.211.3824
Email: cmc-customerservice@chicagometallic.com
To Place Orders
Phone: 1.800.323.7164 option 1
Fax:
2
Open Plenum
1.866.211.3824
chicagometallic.com
Magna T-Cell™
Open Cell
Ceiling
Assembled Panel
Top and Bottom Blades
PRODUCT
chicagometallic.com
UPDATES
Applications
Angle
Ideal for hospitals, hospitality, retail,
airports, transit, galleries, offices.
Web Cover
Features
• Flexibility in design choices, module
sizes and plenum masking.
Main Tee
• Tee grid based systems ensure module
alignment and accept industry standard
fixtures.
• Panels and suspension blend together
visually.
2
• Metal contains no organic compounds
to support mold and microbial growth.
• 100% random access to plenum.
Cross Tees
2
1 1/2
/16
9
/16
9
• Sustainable: Steel: 25% minimum, aluminum: 100% post consumer recycled
content, 100% locally recyclable,
global/regional manufacture.
Blade
Suspension and
Web Cover
2
/4
3
1
/16
15
1 x 2
Wall Angle
34
/ x 15/16
Wall Angle
/8
3
Cell Size
(square)
2 1/16
/16
9
/16
9
Edge Cap
2
Cell
Color and Finish Options
Standard Painted Colors
01 White
08 Black
44 Satin Silver
Premium Painted Colors and Finishes
03 Bronze
21 Copper Metallic
23 Sandstone
88 Flat Black
113 Straw
167 Brick Red
174 Garnet
215 Forest Green
246 Federal Indigo
256 True Blue
263 Plum
270 Pearl Gray
379 Gloss White
386 Gloss Black
401 Maple*
402 Oak*
403 Cherry*
404 Pumpkin Maple*
405 Karri*
425 Wet Clay
428 Yellow Flash
429 Silver Lining
430 Beige Breeze
431 Whitewash
432 Blonde Wood
437 Midnight Blue
438 Royal Amethyst
442 Burgundy Brick
443 Toffee Fate
447 Cinnamon
449 Fortune Gray
455 Cocoa Shell
495 Cardinal Red
510 Morning Dew Metallic
511 Autumn Metallic
512 Moon Glow Metallic
513 Sun Gold Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
520 Polar White 521 Nickel
524 Silver
Anodized Finishes
14 Chromecoat Anodized
16 Brasscoat Anodized
504 Satin Silver Anodized
509 Copper Coat Anodized
MetalWood® II Woodgrain Finishes
650R Maple
651R Cherry
652R Pumpkin Maple
653R Oak
654R Karri
655R Bamboo
(Panels and Web Covers Only)
WoodScenes™ Painted Colors
800 Lazy Maple
801 Aged Teak
802 Vintage Burlwood
803 Burnished Cherry
804 Sleek Cherry
805 Weathered Oak
* Coordinating Solid Paint Colors to MetalWood® II Woodgrain Finishes
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
3
Panel Configurations
Magna T-Cell
Panel Configurations
2 x 2 Panel
3 x 3 Cells
2 x 2 Panel
4 x 4 Cells
2 x 2 Panel
6 x 6 Cells
2 x 2 Panel
8 x 8 Cells
2 x 4 Panel
4 x 4 Cells
2 x 4 Panel
6 x 6 Cells
2 x 4 Panel
8 x 8 Cells
4 x 4 Panel
12 x 12 Cells
Assembled Panels
Product
Number
Cell Size
Panel
Size
Magna T-Cell
Blade
Height
Blade Packaging
Face
Sq. Ft. Pieces Weight
Painted Assembled* Panels – 0.010 Galvanized Steel
36.22.003.xxx
3 x 3
2 x 2
2
9
/16
40
10
31
36.24.004.xxx
4 x 4
2 x 2
2
9
/16
40
10
30
36.22.006.xxx
6 x 6
2 x 2
2
9
/16
40
10
20
36.24.006.xxx
6 x 6
2 x 4
2
9
/16
40
5
20
36.22.008.xxx
8 x 8
2 x 2
2
9
/16
40
10
15
36.24.008.xxx
8 x 8
2 x 4
2
9
/16
40
5
15
36.44.012.xxx
12 x 12
4 x 4
2
9
/16
80
5
20
Reflective Assembled* Panels – 0.024 Aluminum
46.22.003.xxx
3 x 3
2 x 2
2
9
/16
40
10
29
46.22.004.xxx
4 x 4
2 x 2
2
9
/16
40
10
22
46.24.004.xxx
4 x 4
2 x 4
2
9
/16
40
5
22
46.22.006.xxx
6 x 6
2 x 2
2
9
/16
40
10
13
46.24.006.xxx
6 x 6
2 x 4
2
9
/16
40
5
13
46.22.008.xxx
8 x 8
2 x 2
2
9
/16
40
10
8
46.24.008.xxx
8 x 8
2 x 4
2
9
/16
40
5
8
46.44.012.xxx
12 x 12
4 x 4
2
9
/16
80
5
13
* Does not include grid, web covers or wall molding.
4
Open Plenum
chicagometallic.com
Magna T-Cell
Suspension
Product
Number
Length
Dimensions
Height
Face Weight
Per Piece
Edge Cap – Finish Both Sides* for Free-Floating Applications
36.10.916.xxx
10
21/16
9
/16 x 3/8
2
21/16
9
/16 x 3/8
2
1
2
/16
3
/16
3.6
Edge Cap – Finish One Side Only
Edge Cap
36.10.916-46.10.916
46.10.916.xxx
10
Wall Angle – Finish Both Sides (one side for reflective)
C3209.xxx
10
2
* 01 White/08 Black/44 Satin Silver Metallic/Premium/Other Painted Colors only.
** Reflective/Anodized only.
9/16 Grid
Wall Angle
C3209
Main Tee (Heavy Duty)
11/2
9
12
11/2
9
10.04.014.xxxCH
4
11/2
9
/16
1
10.04.022.xxxCH
2
1 /2
9
/16
0.5
10.04.040.01CH
12
Main Tee (Intermediate Duty)
10.04.000.xxxCH
Cross Tees – Stab-in
Main Tee
10.04.000.CH
1
Cross Tee
10.04.014.CH
Cross Tee –No Slots
10.04.022.CH
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
5
Accessories
Magna T-Cell
Product
Per Carton
Number
Length
Description
Piece
Weight
Painted Web Covers – 0.010 Galvanized Steel
Web Cover
38.40.907-38.40.90948.40.907-48.40.909
Web Cover
38.40.908-38.40.91048.
38.40.907.xxx
2 With hanger holes
50
15
38.40.908.xxx
2 Without hanger holes
50
15
38.40.909.xxx
4 With hanger holes
25
15
38.40.910.xxx
4 Without hanger holes
25
15
50
5
Reflective Web Covers – 0.012 Aluminum
48.40.907.xxx
2 With hanger holes
48.40.908.xxx
2 Without hanger holes
50
5
48.40.909.xxx
4 With hanger holes
25
5
48.40.910.xxx
4 Without hanger holes
25
5
Product
Number
Cell
Size
Height
Maximum
Hole Size
Piece
Packaging
Weight
Infill Panels with Cutouts - Flush Fit*
38.06.003.xxx
3 x 3
2
2.125
10
2
38.06.004.xxx
4 x 4
2
3.125
10
2
38.06.006.xxx
6 x 6
2
5.125
10
3
38.06.008.xxx
8 x 8
2
7.125
10
3
38.06.012.xxx
12 x 12
2
11.12
10
4
* Hole size and type (round or square) to be specified at time of order.
Infill Panel
38.06
6
Open Plenum
chicagometallic.com
Intaline™
Baffle Ceiling
Round Base / V Base
PRODUCT
chicagometallic.com
Main Tee (4 O.C.)
UPDATES
Web Cover (optional)
Applications
Ideal for hospitals, hospitality, retail,
airports, transit,galleries, offices.
Features
• Flexibility in design choices, module
sizes and plenum masking.
Cross Tee
(4 O.C.)
• Five distinct systems each with a wide
range of sizes and finishes.
• Tee grid based systems ensure module
alignment and accept industry standard
fixtures.
Baffle
• Metal contains no organic compounds
to support mold and microbial growth.
Suspension Alignment
Clip
Clip
Alignment
Sleeve
V Base
• 100% random access to plenum.
Main Tee (4 O.C.)
V base suspension available for variable baffle
spacing or indexed 4 or 6.
• Sustainable: Steel: 25% minimum,
aluminum: 100% post consumer
recycled content, 100% locally
recyclable, global/regional manufacture.
Web Cover (optional)
Indexing
Clip
Cross Tee
(4 O.C.)
Baffle
Suspension
Clip
Alignment
Clip
Alignment
Sleeve
/16
15
/16
9
6, 8
or 10
4
/4
3
3
/8
1 1/2
/16
15
/16
3
Tees
Angle
15
USA and Canada: 800.323.7164 / fax: 800.222.3744
Round Base
Open Plenum
V Base
/4
7
Baffles
/
Intaline™
Product
Number
9 16
Length
LF
Packaging
Pieces
Weight
Steel Baffle
4 V Base – 0.020
4
48.50.004.xxx
/
3 8
12
Per Order
12
Per Order
12
Per Order
12
Per Order
Aluminum Baffles
6 Round Base – 0.032
Steel-V Base
48.50.004
38.40.031.xxx
8 Round Base – 0.032
38.40.051.xxx
10 Round Base – 0.032
38.40.061.xxx
/
15 16
Color and Finish Options
6, 8
or 10
/
3 4
Aluminum-Round Base
38.40.031-38-40.051-38.40.061
Standard Painted Colors
01 White
08 Black
44 Satin Silver
Premium Painted Colors and Finishes
03 Bronze
21 Copper Metallic
23 Sandstone
88 Flat Black
113 Straw
167 Brick Red
174 Garnet
215 Forest Green
246 Federal Indigo
256 True Blue
263 Plum
270 Pearl Gray
379 Gloss White
386 Gloss Black
401 Maple*
402 Oak*
403 Cherry*
404 Pumpkin Maple*
405 Karri*
425 Wet Clay
428 Yellow Flash
429 Silver Lining
430 Beige Breeze
431 Whitewash
432 Blonde Wood
437 Midnight Blue
438 Royal Amethyst
442 Burgundy Brick
443 Toffee Fate
447 Cinnamon
449 Fortune Gray
455 Cocoa Shell
495 Cardinal Red
510 Morning Dew Metallic
511 Autumn Metallic
512 Moon Glow Metallic
513 Sun Gold Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
520 Polar White 521 Nickel
524 Silver
Anodized Finishes
14 Chromecoat Anodized**
16 Brasscoat Anodized**
504 Satin Silver Anodized**
509 Copper Coat Anodized**
WoodScenes™ Painted Colors
800 Lazy Maple
801 Aged Teak
802 Vintage Burlwood
803 Burnished Cherry
804 Sleek Cherry
805 Weathered Oak
* Coordinating Solid Paint Colors to MetalWood® II Woodgrain Finishes ** Finish on one side only
8
Open Plenum
chicagometallic.com
Intaline™
Suspension
Product
Number
Length
Dimensions
Height
Face Feet
Packaging
Pieces
Weight
15/16 Grid
CubeGrid Main Tee (Intermediate Duty) – Slotting is 48 O.C.
Main Tee
C1811M
C1811Mxxx
12
11/2
15
/16
300
25
73
11/2
15
/16
200
50
49
/16
–
12
23
/16
–
12
23
CubeGrid Cross Tee – Stab-in
C1804Mxxx
4
Indexing V Base Carrier
Cross Tee
C1804M
48.40.100.008
12
11/2
15
48.40.101.008
12
1 /2
15
1
Note: Use for V Base Baffles. Notches space baffles. Baffles attached to carrier with #48.40.005.008 attachment clip.
Cross Tee for Indexing V Base Carrier – Stab-in
C1210Mxxx
Indexing V-base Carrier
48.40.100.008
4
Product
Number
Length
11/2
/16
50
49
Packaging
Pieces
Weight
300
25
25
–
–
2
/16
1
0.50
/16
1
0.50
15
200
Dimensions
Height
Face
LF
Wall Angle – Aluminum with Hemmed Edges
38.90.124.xxx
Wall Angle
38.90.124
12
/4
3
/16
15
Wall Angle – Painted Both Sides
C3209.xxx
10
2
1
Web Cover* – With Hanger Holes
38.40.909.xxx
4
2
9
Web Cover* – Without Hanger Holes
38.40.910.xxx
Wall Angle
C3209
4
2
9
* Optional when used with standard grid.
Web Cover
38.40.909
Web Cover
38.40.910
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
9
Accessories
Intaline™
Product Per Carton
Number
Description
Pieces
Weight
Suspension Clip
Suspension Clip
48.40.003 - 38.40.921
48.40.003.008
Steel baffle to 15/16 grid-08 Black
100
1
38.40.921.008
Aluminum baffle to /16 grid-08 Black
100
1
15
Swivel Suspension Clip
48.40.004.008
Steel baffle to 15/16 grid-08 Black
25
2
38.40.004.008
Aluminum baffle to /16 grid-08 Black
25
2
48.40.002
Steel baffle-Clear
100
1
38.40.922
Aluminum baffle-Clear
50
1
100
1
250
1
50
1
15
Alignment Clip (top)
Swivel Suspension Clip
48.40.004 - 38.40.004
Alignment Clip (bottom)
48.40.001
Steel baffle
Indexing Suspension Clip
48.40.005.008
Indexing Suspension Clip
48.40.005
V Baffle to Intaline Carrier
Alignment Sleeve (bottom)
38.40.923
Aluminum baffle
Alignment Clip (top)
48.40.002
Alignment Clip (bottom)
48.40.001
Alignment Clip (top)
38.40.922
Alignment Sleeve (bottom)
38.40.923
10
Open Plenum
chicagometallic.com
CubeGrid™
Open Plenum
Grid Ceiling
PRODUCT
Angle
chicagometallic.com
UPDATES
Applications
Ideal for hospitals, hospitality, showrooms, lobbies, corridors.
Features
Main Tee
• Flexibility in design choices, module
sizes and plenum masking.
• Tee grid based systems ensure module
alignment and accept industry standard
fixtures.
/16
15
/4
3
/16
1
• 100% random access to plenum.
15
1 x 2
Wall Angle
Tees
• No unnecessary holes in suspension
web.
2
1 1/2
Web
Cap
• Metal contains no organic compounds
to support mold and microbial growth.
Cross Tee
/ x 15/16
Wall Angle
15 16
• Lowers total costs.
• 360 degree painting of all components.
• Sustainable: Steel: 25% minimum,
aluminum: 100% post consumer
recycled content, 100% locally recyclable, global/regional manufacture.
24 x 24
48 x 48
Color and Finish Options
Standard Painted Colors
01 White
08 Black
44 Satin Silver
Premium Painted Colors and Finishes
03 Bronze
21 Copper Metallic
23 Sandstone
88 Flat Black
113 Straw
167 Brick Red
174 Garnet
215 Forest Green
246 Federal Indigo
256 True Blue
263 Plum
270 Pearl Gray
379 Gloss White
386 Gloss Black
401 Maple*
402 Oak*
403 Cherry*
404 Pumpkin Maple*
405 Karri*
425 Wet Clay
428 Yellow Flash
429 Silver Lining
430 Beige Breeze
431 Whitewash
432 Blonde Wood
437 Midnight Blue
438 Royal Amethyst
442 Burgundy Brick
443 Toffee Fate
447 Cinnamon
449 Fortune Gray
455 Cocoa Shell
495 Cardinal Red
510 Morning Dew Metallic
511 Autumn Metallic
512 Moon Glow Metallic
513 Sun Gold Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
520 Polar White 521 Nickel
524 Silver
Anodized Finishes
14 Chromecoat Anodized**
16 Brasscoat Anodized**
504 Satin Silver Anodized**
509 Copper Coat Anodized**
WoodScenes™ Painted Colors
800 Lazy Maple
801 Aged Teak
802 Vintage Burlwood
803 Burnished Cherry
804 Sleek Cherry
805 Weathered Oak
* Coordinating Solid Paint Colors to MetalWood® II Woodgrain Finishes ** Finish on suspension face only
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
11
15/16 360° Finished Grid Components
CubeGrid™
Product
Dimensions
Number
Length
Height
Face
Feet
Packaging
Pieces
Weight
300
25
73
300
25
73
/16
150
75
37
/16
200
50
49
300
25
73
25
73
50
49
Packaging
Pieces
Weight
120
10
10
–
–
2
24 x 24 Module
Main Tee - Heavy Duty – Slotting is 24” O.C. Main Tee
C1800-C1811
C1800KxxX
12(
/16
15
Main Tee - Intermediate Duty – Slotting is 24” O.C.
C1811KxxX
12(
Cross Tees - Stab-in
Cross Tee
C1802
1 /2
1
1 /2
1
/16
15
C1802KxxX
2(
1 /2
15
C1804KxxX
4(
1 /2
15
1
1
48 x 48 Module
Main Tee - Heavy Duty – Slotting is 48” O.C.
C1800MxxX
12(
11/2
/16
15
Main Tee - Intermediate Duty – Slotting is 48” O.C.
Cross Tee
C1804
C1811MxxX
Cross Tee - Stab-in
C1804MxxX
Wall Angle
C3209
12(
11/2
4(
11/2
/16
15
/16
15
300
200
Product
Dimensions
Number
Length
Height
Face
Feet
Wall Angles
Finish One Side - Aluminum with Hemmed Edges
38.90.124.xxx
Painted Both Sides
Wall Angle
38.90.122
12
C3209.xx
12(
/4
3
15
/16
10
2
1
*Reflective and Anodized finishes on one side only.
Open Plenum
chicagometallic.com
BeamGrid™
Open Plenum
Beam Ceiling
PRODUCT
chicagometallic.com
UPDATES
Hanger/Coupler
Applications
Ideal for hospitals, hospitality, retail,
airports, transit, galleries, offices,
cafeterias, lobbies.
Main Beam
Perimeter Beam
Features
Cross Beam
• Flexibility in design choices, module
sizes and plenum masking.
Corner Kit
• Five module sizes.
• Choose section and module to suit
scale of space.
• 100% random access to plenum.
• Sustainable: Aluminum: 100% post
consumer recycled content, 100%
locally recyclable, global/regional
manufacture.
H
H
• Metal contains no organic compounds
to support mold and microbial growth.
W
W
Beam
Wall Channel
Available Sizes
• BeamGrid is available in the following beam sizes:
Standard (wide x high)
Special Order (wide x high)
1 x 1
1 x 5
1 x 2
2 x 6
1 x 4
2" x 8"
2 x 2
3 x 6
2 x 4
3 x 12
3 x 3
5 x 5
4 x 4
6 x 6
• BeamGrid is available in the following standard module sizes:
12 x 12, 16 x 16, 24 x 24, 36 x 36, 48 x 48
Color and Finish Options
Standard Painted Colors
01 White
08 Black
44 Satin Silver
Premium Painted Colors and Finishes
03 Bronze
21 Copper Metallic
23 Sandstone
88 Flat Black
113 Straw
167 Brick Red
174 Garnet
215 Forest Green
246 Federal Indigo
256 True Blue
263 Plum
270 Pearl Gray
379 Gloss White
386 Gloss Black
401 Maple*
402 Oak*
403 Cherry*
404 Pumpkin Maple*
405 Karri*
425 Wet Clay
428 Yellow Flash
429 Silver Lining
430 Beige Breeze
431 Whitewash
432 Blonde Wood
437 Midnight Blue
438 Royal Amethyst
442 Burgundy Brick
443 Toffee Fate
447 Cinnamon
449 Fortune Gray
455 Cocoa Shell
495 Cardinal Red
510 Morning Dew Metallic
511 Autumn Metallic
512 Moon Glow Metallic
513 Sun Gold Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
520 Polar White 521 Nickel
524 Silver
Anodized Finishes
14 Chromecoat Anodized
16 Brasscoat Anodized
504 Satin Silver Anodized
509 Copper Coat Anodized
WoodScenes™ Painted Colors
800 Lazy Maple
801 Aged Teak
802 Vintage Burlwood
803 Burnished Cherry
804 Sleek Cherry
805 Weathered Oak
* Coordinating Solid Paint Colors to MetalWood® II Woodgrain Finishes
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
13
MetalScapes™
Wire Mesh
Panels
MetalScapes Panel
PRODUCT
chicagometallic.com
UPDATES
Wall Angle
Applications
Create durable, accessible, and airy
ceilings in interior spaces.
Features
• MetalScapes Wire Mesh panels
are constructed of stainless or
carbon steel.
Main Tee
• 8 stainless steel panels — no painting.
Cross Tee
• 6 carbon steel panels — paintable.
• Stainless steel and carbon steel panels
are available in 24 x 24 or 24 x 48
nominal configuration for use in
15/16 grid.
• Factory applied no-VOC powder
coated paints for carbon steel
panels only.
24 x 24 and 24 x 48 lay-in wire panel for use with 15/16 T-grid.
Stainless Steel Patterns
Benefits
• MetalScapes Wire Mesh panels may
contribute to LEED® certification
project credits.
Appalachian
60015
Alps
60016
Everest
60017
Tyber
60022
Hood
60019
Atlas
60020
Rockies
60018
Ural
60021
Scales
60029
Armor
60031
• Class A Fire Rating (Non-combustible
material).
• From 10% to 25% recycled content;
100% recyclable at end of useful life.
Carbon Steel Patterns
Aberdeen
60023
Erlanger
60025
Frankfort
60027
Lattice
60033
Standard Painted Colors
(Carbon Steel Patterns only)
01 White
08 Black
44 Satin Silver
14
Open Plenum
chicagometallic.com
GraphGrid™
Open Wire
Ceiling Panel
GraphGrid
Panel
PRODUCT
chicagometallic.com
UPDATES
Wall Angle
Applications
Ideal for hospitals, hospitality, retail,
airports, transit, galleries, offices, corridors.
Features
• Flexibility in design choices, cell sizes
and plenum masking.
Main Tee
Cross Tee
• Designed to show consistent wire
spacing, even at panel perimeter.
• Four designs with different wire
spacing.
• Tee grid based systems ensure module
alignment and accept industry standard fixtures.
24 x 24 lay-in wire panel for use with 9/16 and 15/16 T-grid.
• Metal contains no organic compounds
to support mold and microbial growth.
• 100% random access to plenum.
• Lowers total costs.
• Sustainable: Steel: 25% minimum locally recyclable, global/regional manufacture.
1 x 1 Cell
2 x 2 Cell
Product
Number
Cell Size
3 x 3 Cell
Nominal
Panel Size
Sq Ft
4 x 4 Cell
Packaging
Piece
Weight
GraphGrid Panels – For 15/16 and 9/16 T-Grid
8901.xxx
1 x 1
2 x 2
Per Order
8902.xxx
2 x 2
2 x 2
Per Order
8903.xxx
3 x 3
2 x 2
Per Order
8904.xxx
4 x 4
2 x 2
Per Order
Wire diameter: 0.117
Color and Finish Options
Standard Painted Colors
01 White
08 Black
44 Satin Silver
Premium Painted Colors and Finishes
21 Copper Metallic
23 Sandstone
379 Gloss White
431 Whitewash
510 Morning Dew Metallic
511 Autumn Metallic
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
512 Moon Glow Metallic
513 Sun Gold Metallic
514 Harvest Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
520 Polar White
521 Nickel
524 Silver
Reflective Finish
58 Bright Mirror
15
System Integration Open Plenum
Magna T-Cell™
Panel at Suspension
Edge Cap
Infinity™ Perimeter Trim
(Web Cover conceals fasteners)
15/16 x 3/4 Wall Angle
1 x 2 Wall Angle
Intaline™
Baffle Attachment
Baffle Parallel
To Wall
Baffle Alignment
V Base Baffle in
Indexing Carrier
Baffle Perpendicular To Wall
CubeGrid™
Grid Intersection
Wall condition with 15/16 Angle
Infinity™ Perimeter Trim
Wall condition with 1 x 2 Angle
BeamGrid™
Wall Channel
Perimeter Beam
Infinity™ Perimeter Trim
Wall Channel-double
GraphGrid™ and MetalScapes™
Panel at Grid
Panel at Wall
16
Open Plenum
Infinity™ Perimeter Trim
chicagometallic.com
Open Plenum Specification Data
Product information for integration into ceiling specification
Magna T-Cell
panel type
Intaline Round Base
material
depth
2
6, 8, 10
width
9/16
3/4
panel size/length
2 x 2, 2 x 4, 4 x 4
12
painted steel
•
painted aluminum
•
reflective and anodized •
one side only
anodized aluminum
size
spacing
3, 4, 6, 8, 12
6, 8, 10
variable
fire
class A: flame 0, smoke 0 •
•
per ASTM E 84
performance
interior applications
•
•
suspension
9/16 general
•
15/16 general
•
beam
warranty
1 year limited
•
•
sustainability
Steel: 25% minimum, aluminum: •
•
100% post consumer recycled
content,100% locally recyclable
global manufacture
panel type
Intaline V Base
4
3/8
12
•
one side only
4
variable
•
•
•
•
•
CubeGrid
BeamGrid
GraphGrid
MetalScapes
1 1/2
1, 2, 3, 4
n/a
n/a
material
depth
width
15/16
1, 2, 3, 4
1, 2, 3, 4
panel size/length
2 x 2
painted steel
•
•
painted aluminum
•
stainless steel
reflective and anodized cap only
•
anodized aluminum
various
2 x 2, 2 x 4
size
fire
performance
suspension
warranty
sustainability
spacing
24, 48
12, 16, 24 30, 36 48
1, 2, 3, 4
class A: flame 0, smoke 0 •
•
•
per ASTM E 84
interior and seismic environments
•
•
•
9/16 general
•
15/16 general
•
•
beam
•
1 year limited
•
•
•
Steel: 25% minimum, aluminum: •
•
•
100% post consumer recycled
content,100% locally recyclable
global manufacture
Aluminum: 100% post consumer
•
recycled content,100% locally
recyclable global manufacture
various
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
•
•
•
•
•
•
17
Specification Magna T-Cell™ Open Cell
PART 1 - GENERAL
1.01 Section Includes
Provide Open Cell Ceiling System.
1.02 Related Sections
A. Section 09 22 26 - Suspension Systems
B. Section 09 54 00 - Specialty Ceilings
C. Section 13 42 00 - Building Modules
D. Section 13 48 00 - Sound, Vibration, and Seismic Control
E. Section 23 50 00 - Central Heating Equipment
F. Section 26 50 00 - Lighting
G. Section 265000 Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C635 - Standard Specification for the manufacture, performance, and testing
of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
2. C636 - Standard Practice for Installation of Metal Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels.
1.04 Submittals
A. Product data sheets listing dimensions, load carrying capacity and standards
compliance.
B. Sample kit containing appropriate open cell ceiling samples.
C. Shop drawings illustrating appropriate placement of system.
D. Certification of materials and system conforming to specification requirements.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area receiving suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to installation.
3. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and
occupied.
4. Heating and air conditioning systems to be operating prior to, during, and
after installation.
1.06 Maintenance
Furnish additional material equal to ______ percent of ceiling area.
PART 2 - PRODUCTS
2.01 Manufacturers
Magna T-Cell ceiling system as manufactured by Chicago Metallic, 4849 S. Austin
Avenue, Chicago, IL, 1-800-323-7164.
2.02 Suspension System Components
A. Lay-In Panels:
1. Manufactured from (painted 0.010 inch galvanized steel) (0.024 inch aluminum)
forming U-shaped blades 2 inches high by 9/16 inch wide by (24)(48) inches
long, notched to form (3 x 3)(4 x 4)(6 x 6)(8 x 8)(12 x 12) inch cells.
2. Finish: (Coated with baked-on polyester enamel paint); Color: (01 White)(08
Black)(44 Satin Silver)(Other ____); Anodized (14 Chromecoat)(16 Brasscoat)
(509 Coppercoat), Woodscenes (____), MetalWood II (____).
3. Panels: (24 x 24)(24 x 48)(48 x 48) inches, nominal size. Architect Note: 48
x 48 inch panel available for 12 x 12 inch cell only.
B. Suspension System Components:
1. Main Tees:
a. Manufactured from (0.018)(0.020) inch steel 9/16 inch wide by 1-1/2 inches
high by 144 inches long, with factory punched cross tee slots, hanger holes
and integral bayonet-style end couplings.
18
b. Capping color and finish matches lay-in panels.
2. Cross Tees:
a. Manufactured from (0.012) (0.018) inch steel 9/16 inch wide, by 1-1/2 inches
high by (24) (48) inches long, with factory punched cross tee slots, hanger
holes, and staked-on end couplings.
b. Capping color and finish matches Main Tees.
3. Web Covers:
a. Manufactured from (painted 0.010 inch galvanized steel)(0.012 inch aluminum) 2 inches high by 9/16 inches wide by (24)(48) inches long, formed to
a “U” shape, (with)(without) pre-punched hanger holes.
b. Color and finish matches panels.
4. Perimeter Treatment:
a. Wall angle:
1. Manufactured from (0.020 inch steel)(0.025 inch aluminum) 2 inches high
by 1 inch wide by 120 inches long.
2. Finish: (Painted both sides)(Anodized on outer surface) color matching
panels.
b. Edge Cap:
1. Manufactured from (painted 0.020 inch galvanized steel)(0.025 inch
aluminum) 2-1/16 inches I.D. by 3/8 inch wide top leg by 9/16 inch wide
bottom leg.
PART 3 - EXECUTION
3.01 Examination
Examine area receiving suspension system to identify conditions which will
adversely affect installation. Do not begin installation until adverse conditions
have been remedied.
3.02 Installation
A. Main Tees: Installed 48 inches on center, by direct suspension from existing
structure, with not less than 12 gage steel hanger wires, wrapped tightly 3 full
turns, spaced 48 inches on center along component length.
B. Web Covers: Installed on main runners during main runner installation.
C. Cross Tees:
1. Installed perpendicular to main tees (24)(48) inches on center forming (24 x
48)(48 x 48) inch modules.
2. Installed perpendicular to 24 inch by 48 inch module forming cross tees 24
inches on center forming 24 inch by 24 inch modules.
D. Perimeter Treatment
1. Wall angle: Installed on vertical surfaces intersecting suspension system by
appropriate method in accordance with industry accepted practice.
2. Edge cap: Affixed to main tee and cross tee ends by (screw)(pop rivet) attachments.
3.03 Repair
A. Remove damaged components, replace with undamaged components. Clean with
non-solvent based non-abrasive commercial cleaning solution.
1.Installation to begin only when temperature and humidity conditions closely approximate interior conditions which will exist when area is complete and occupied.
2.Additional Hanger Wires at locations where imposed loads could cause
deflection exceeding 1/360 span.
E. Air Diffusers: coordinate with Mechanical (HVAC) Division.
3.03 Repair
A. Remove damaged components, replace with undamaged components. Clean
with non-solvent based non-abrasive commercial cleaning solution.
Open Plenum
chicagometallic.com
Intaline™ Baffle
Specification
PART 1 - GENERAL
1.01 Scope
Furnish and install the Intaline metal baffle open plenum ceiling system as manufactured and supplied by Chicago Metallic Corporation.
1.02 Related Sections
A. Section 09 22 26 - Suspension Systems
B. Section 09 53 00 - Acoustical Ceiling Suspension Assemblies
C. Section 09 54 00 - Specialty Ceilings
D. Section 09 58 00 - Integrated Ceiling Assemblies
E. Section 13 48 00 - Sound, Vibration and Seismic Control
F. Section 23 00 00 - Heating, Ventilating and Air Conditioning
H. Section 26 50 00 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C 635 - Standard Specification for the manufacture, performance, and testing
of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
2. C 636 - Standard Practice for Installation of Metal Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels.
3. E 84 - Test Method for Surface Burning Characteristics of Building Materials.
1.04 Submittals
A. Product data: Manufacturers standard data sheets listing dimensions and details.
B. Samples: Manufacturers standard samples including suspension, panels and
colors.
C. Shop Drawings: Reflected ceiling plan and elevation drawings indicating ceiling
layouts, dimensions and perimeter conditions.
D. Certification
1. Furnish certification of materials and system conforming to specification
requirements.
2. Provide written warranty against defective workmanship and materials for a
period of __ year(s) (up to 20 yrs. maximum) from filing notice of completion.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area to receive suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to suspension
system installation.
3. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and
occupied.
4. Heating and air conditioning systems to be operating prior to, during, and
after installation.
5. Deliver materials in manufacturers original packaging, unopened and undamaged.
6. Store materials in an enclosed dry location at room temperature and protect
from soiling, damage, moisture and humidity.
PART 2 - PRODUCTS
2.01 Manufacturers
Intaline metal baffle open plenum ceiling system as manufactured by Chicago Metallic
Corporation, 4849 South Austin Avenue, Chicago, Illinois 60638. 1-800-323-7164.
2.02 Components
A. Baffle Panels:
1. Manufactured from (0.020 inch steel) (0.032 inch aluminum) nominal (4)
(6) (8) (10) inches deep by 144 inches long, with (round) (diagonal V) base.
Architect Note: Nominal 4 inch deep panel available in steel with diagonal V
base only. Nominal (6) (8) (10) inch deep panels available in aluminum with
round base only.
2. Finish: (coated with baked-on polyester enamel painted finish on both dies,
Color: _______), Anodized on one side, color _______), (WoodScenes
painted color _______).
USA and Canada: 800.323.7164 / fax: 800.222.3744
B. Suspension System Components:
1. Main Tees:
a. Manufactured from 0.015 inch steel 15/16 inch wide by 1-1/2 inches high
by 144 inches long, with factory punched cross tee slots, hanger holes
and integral bayonet-style couplings.
b. Finish on cap to be (08 Black)(________).
2. Cross Tees:
a. Manufactured from 0.015 inch steel 15/16 inch wide by 1-1/2 inches high
by 48 inches long with factory punched cross tee slots, hanger holes,
and staked-on stab-in end couplings.
b. Finish on cap to be (08 Black)(________).
3. Web Covers (optional):
a. Manufactured from 0.010 inch steel 2 inches high by 5/16 inches
wide by 48 inches long, formed to a “U” Aluminum Steel shape, (with)
(without) pre-punched hanger holes.
b. Finish on cap to be (08 Black)(________).
4. Wall Angle:
a. Manufactured from (0.020 inch steel) (0.025 inch thick aluminum) 3/4
inches wide by 15/16 inches high by 144 inches long with both edges
hemmed.
b. Finish on cap to be (08 Black)(________).
C. Accessories:
1. Suspension Clips: Manufactured from steel with factory applied (white) (black)
baked-on enamel paint finish.
2.
Alignment Components: Manufactured from clear acrylic.
PART 3 - EXECUTION
3.01 Examination
A. Examine area receiving system to identify conditions which will adversely affect
installation. Do not begin installation until adverse conditions have been remedied.
B. Verify completion of work above ceiling plane prior to installation.
3.02 Installation
A. Suspension Components:
1. Main Tees: Installed 48 inches on center by direct suspension from existing
structure, with not less than 12 gauge hanger wires wrapped tightly 3 full
turns, spaced 48 inches on center along component length.
2.
Web Covers: Installed on main tees during main tee installation.
3.
Cross Tees: Installed perpendicular to main tees 48 inches on center forming
48 x 48 inch modules.
4.
Wall Angles: Installed on vertical surfaces intersecting suspension system
by appropriate method in accordance with industry accepted practice.
B. Linear Baffle Panels and Accessories:
1. Baffle Panels:
a. Installed perpendicular or diagonally to main tee component spaced as
noted on project drawings, or identical to the baffle panel depth. 6 inch
maximum allowable overhang for baffle panels.
b. Attached with suspension clips to main tees.
c. Connected with top alignment clip and bottom alignment sleeve.
3.03 Repair
A. Remove damaged components, replace with undamaged components. Clean
with non-solvent based non-abrasive commercial cleaning solution.
Open Plenum
19
Specification CubeGrid™ Open Plenum Grid
PART 1 - GENERAL
1.01 Section Includes
Modular suspended open plenum ceiling system.
1.02 Related Sections
A. Section 09 22 26 - Suspension Systems
B. Section 09 54 00 - Specialty Ceilings
C. Section 13 42 00 - Building Modules
D. Section 13 48 00 - Sound, Vibration, and Seismic Control
E. Section 23 50 00 - Central Heating Equipment
F. Section 26 50 00 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C635 - Standard Specification for the manufacture, performance, and testing
of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
2. C636 - Standard Practice for Installation of Metal Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels.
1.04 Submittals
A. Product data sheets listing dimensions, load carrying capacity and standards
compliance.
B. 12 inch long samples of Main Tees and Cross Tees with integral couplings.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area receiving suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to installation.
3. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and
occupied.
4. Heating and air conditioning systems to be operating prior to, during, and
after installation.
1.06 Maintenance
Furnish additional material equal to ______ percent of ceiling area.
Specification GraphGrid™ Open Wire Ceiling Panel
PART 1 - GENERAL
1.01 Section Includes
Modular suspended open plenum ceiling system.
1.02 Related Sections
A. Section 09 22 26 - Suspension Systems
B. Section 09 54 00 - Specialty Ceilings
C. Section 13 42 00 - Building Modules
D. Section 13 48 00 - Sound, Vibration, and Seismic Control
E. Section 23 50 00 - Central Heating Equipment
F. Section 26 50 00 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C635 - Standard Specification for the manufacture, performance, and testing
of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
2. C636 - Standard Practice for Installation of Metal Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels.
1.04 Submittals
A. Product data sheets listing dimensions, load carrying capacity and standards
compliance.
B. Samples of panel with chosen cell size and suspension system including main
tees and cross tee with integral end couplings.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area receiving suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to installation.
3. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and
occupied.
4. Heating and air conditioning systems to be operating prior to, during, and
after installation.
20
PART 2 - PRODUCTS
2.01 Manufacturers
Chicago Metallic C1811/C1802/C1804 double web Intermediate duty non-fire
rated ceiling suspension system. Installed to form open plenum module size of
(12 inches x 12 inches)(24 inches x 24 inches)(48 inches x 48 inches)(___ x
___).
2.02 Suspension System Components
A. Main Tees:
1. C1811 - 144 inch long, manufactured from (0.015)(0.020) inch steel 15/16 inch
wide by 1-1/2 inches high with factory punched holes only where necessary
to achieve tee intersections, hanger wire suspension and integral bayonetstyle end couplings.
2. Finish: Web and end couplings - baked enamel paint (01 White)(08 Black)(44
Satin Silver Metallic)(Other color ______). Cap - (matching baked enamel
color) [Anodized Face Only (14 Chromecoat)(16 Brasscoat)(509 Coppercoat)],
(WoodScenes painted color ______).
B. Cross Tees:
1. (C1802, 24 inch long) (C1804, 48 inch long) manufactured from 0.015 inch
steel 15/16 inch wide by 1-1/2 inch high by with factory punched cross tee
slots only where required to achieve grid intersections and integral bayonetstyle end couplings.
2. Finish: Web and end couplings: baked enamel paint (01 White)(08 Black)
(44 Satin Silver Metallic)(Other color ______). Cap: (matching baked
enamel color) [Anodized Face Only (14 Chromecoat)(16 Brasscoat)(509
Coppercoat)].
C. Perimeter Treatment Components:
1. Angle Moldings: (C3209.08, 1 inch wide x 2 inch high) (38.90.124.xxx, 3/4
inch wide by 15/16 inch high) 15/16 inch face by 144 inches long finished
identical to main tees and cross tees.
2.
Floating Perimeter Trim: Infinity™ by Chicago Metallic. Made from extruded
aluminum [(2)(4)(6)(8)(10)(12)] inches deep. Painted on all sides [(to match
CubeGrid)(Other painted color _________)].
3.
Hanger wire: galvanized.
1.06 Maintenance
Furnish additional material equal to ______ percent of ceiling area.
PART 2 - PRODUCTS
2.01 Manufacturers
Chicago Metallic GraphGrid™ panel and CubeGrid™ double web Intermediate
duty non-fire rated ceiling suspension system. Installed to form open plenum
module size of 24 inches x 24 inches.
2.02 Suspension System Components
A. Main Tees:
1. CubeGrid C1811, 144 inch long, manufactured from 0.015 inch thick steel
15/16 inch wide by 1-1/2 inches high with factory punched holes only where
necessary to achieve tee intersections, hanger wire suspension and integral
bayonet-style end couplings.
2. Finish: Web and end couplings - baked enamel paint (01 White)(08 Black)(44
Satin Silver Metallic)(Other color ______). Cap - (matching baked enamel
color) [Anodized Face Only(14 Chromecoat)(16 Brasscoat)(509 Coppercoat)].
B. Cross Tees:
1. CubeGrid (C1802, 24 inch long)(C1804, 48 inch long) manufactured from
0.015 inch thick steel 15/16 inch wide by 1-1/2 inch high with factory punched
cross tee slots only where required to achieve grid intersections and integral
bayonet-style end couplings. Cross tees to include bulb-forward design to
minimize gap between cross tee and main tee.
2. Finish: Web and end couplings: baked enamel paint (01 White)(08 Black)(44
Satin Silver Metallic)(Other color ______). Cap: (matching baked enamel
color) [Anodized Face Only(14 Chromecoat)(16 Brasscoat)(509 Coppercoat)].
C. Perimeter Treatment Components:
1. CubeGrid Angle Moldings: (C3209, 1 inch wide x 2 inch high) (38.90.124.xxx,
15/16 inch wide by 15/16 inch high) 3/4 inch face by 144 inch long finished
identical to main tees and cross tees.
2.
Infinity™ perimeter trim: Made from extruded aluminum [(2)(4)(6)(8)(10)(12)]
inches deep. Painted on all sides [(to match CubeGrid)(GraphGrid)(Other
painted color _________)].
Open Plenum
chicagometallic.com
BeamGrid™ Open Plenum Beam PART 1 - GENERAL
1.01 Scope
Furnish and install the BeamGrid ceiling system as manufactured and supplied by
Chicago Metallic Corporation.
1.02 Related Sections
A. Section 092000 - Plaster and Gypsum Board
B. Section 095100 - Acoustical Ceilings
C. Section 096300 - Acoustical Ceiling Suspension Assemblies
D. Section 095400 - Specialty Ceilings
E. Section 210000 - Fire Suspension
F. Section 220000 - Plumbing
G. Section 230000 - Heating, Ventilating and Air Conditioning
H. Section 265000 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C 635 - Standard Specification for the manufacture, performance, and testing
of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
2. C 636 - Standard Practice for Installation of Metal Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels.
1.04 Submittals
A. Product data: Manufacturers standard data sheets listing dimensions and details.
B. Samples: Manufacturers standard samples including suspension, panels and
colors.
C. Shop Drawings: Reflected ceiling plan and elevation drawings indicating ceiling
layouts, dimensions and perimeter conditions.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area to receive suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to suspension
system installation.
3. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and
occupied.
4. Heating and air conditioning systems to be operating prior to, during, and
after installation.
5. Deliver materials in manufacturers original packaging, unopened and undamaged.
6. Store materials in an enclosed dry location at room temperature and protect
from soiling, damage, moisture and humidity.
Specification
B. Perimeter treatments:
1. Perimeter beam: Manufactured identical to main and cross beams with
intersection slots on one side only at inside and outside 90° corners provide
90° corner kits with 45° miters.
2. Corner Kit: Manufactured to same profile as main beams from identical metal
with 45° miter at appropriate end.
3. Wall channel: Manufactured from same material and finish as main and cross
beams.[(Painted 360°)(Reflective finish on outer surface only)].
4. Wall channel-double: Manufactured from same material and finish as main
and cross beams.
5. Curved perimeter trim (Infinity™): [(2 in.)(4 in.)] painted [(to match main and
cross beams)(color _____)].
C. Suspension:
1. Hanger wire: galvanized.
PART 3 - EXECUTION
3.01 Examination
Examine area receiving system to identify conditions which will adversely affect
installation. Do not begin installation until adverse conditions have been remedied.
3.02 Installation
A. Affix hanger/couplers on appropriate centers, as recommended by Chicago
Metallic, to main beam components. Suspend main beam components from
12 gauge hanger wire attached to the coupler. Main beams are to be installed
on appropriate centers as dictated by module size and component layout. For
continuous runs of the main beam components, splice the components together
by pop-riveting the coupler to the consecutive main beam components.
B.
Install cross beam components by inserting the attachment tabs located at each
end of the component into the appropriate slot on the main beam components.
C. Complete the system by affixing main and cross beam components to
the perimeter components. For free-floating applications, perimeter beam
components shall be suspended from 12 gauge wire attached to hanger/
couplers affixed to the component in an identical manner as described above
for the main beam components. For applications requiring the BeamGrid
system to be affixed to a wall or other structure establishing the perimeter of
an installation, attach the perimeter beams to the structure, prior to installing
main and cross beams, by means of an industry-accepted practice. For freefloating applications, attach the 90° corners, upon completion of field assembly,
to appropriate components by means of the hanger/coupler.
3.03 Repair
A. Remove damaged components, replace with undamaged components. Clean
with non-solvent based non-abrasive commercial cleaning solution.
PART 2 - PRODUCTS
2.01 Manufacturers
Chicago Metallic BeamGrid™ non-rated beam suspension system.
2.02 Beam suspension system components
Finish to be [(Painted with baked enamel finish) (379 Gloss White) (386 Gloss Black)
(color_____)] [(Reflective anodized finish) (14 Chromecoat) (16 Brasscoat) (378
Brushed Aluminum)]. (WoodScenes painted finish _____).
A. Main and cross beams:
1. Manufactured to a (1 in. x 1 in.)(1 in. x 2 in.)(1 in. x 4 in.)(2 in. x 2 in.)(2 in. x
4 in.)(3 in. x 3 in.)(4 in. x 4 in.) channel shape from 0.024 in. aluminum.
2. Manufactured with factory pre-punched slots and holes properly spaced to
provide module size: (12 in. x 12 in.)(12 in. x 24 in.)(16 in. x 16 in.)(24 in. x
24 in.)(24 in. x 48 in.)(30 in. x 30 in.)(36 in. x 36 in.)(48 in. x 48 in.).
USA and Canada: 800.323.7164 / fax: 800.222.3744
Open Plenum
21
Specification MetalScapes™ Wire Mesh Panel
PART 1 - GENERAL
1.1 Related Documents
Drawings and general conditions of Contract, including General and Supplementary
Conditions and Divisions-1 Specification sections apply to work of this section.
1.01 Section Includes
A. Open metal mesh ceiling panels
B. Metal acoustical ceiling suspension systems.
C. Suspension system accessories and perimeter treatment.
Modular Suspended Open Plenum Ceiling System.
1.02 Related Sections
A. Section 09 22 26 - Suspension Systems
B. Section 09 54 00 - Specialty Ceilings
C. Section 13 42 00 - Building Modules
D. Section 13 48 00 - Sound, Vibration, and Seismic Control
E. Section 23 50 00 - Central Heating Equipment
F. Section 26 50 00 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. A 641 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel
Wire.
2. A 653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by
the Hot-Dip Process.
3. A 100B Standard Specification for Steel Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High Strength Low-Alloy with improved
Formability.
4. C 423 Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
5. C 635 Standard Specification for the manufacture, performance, and testing
of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
6. C 636 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels.
1.04 Submittals
A. Product data sheets listing dimensions, load carrying capacity and standards
compliance.
B. Samples of panel with chosen cell size and suspension system including main
tees and cross tee with integral end couplings.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area receiving suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to installation.
3. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and
occupied.
4. Heating and air conditioning systems to be operating prior to, during, and
after installation.
5. The placement of wire mesh panels may affect the distribution of fire suppression systems by delaying or accelerating the distribution of sprinkler
discharge toward or away from the source of heat. Designers and installers
must consult a fire protection engineer, NFPA 13 or their local codes for
guidance where automatic fire suppression systems are present.
1.06 Delivery, Storage and Handling
A. Store the ceiling panels in cartons in a dry, interior location before installation to
avoid damage.
B. Exercise care when handling and moving cartons and panels so as not to cause
damage.
1.06 Maintenance
Furnish additional material equal to ______ percent of ceiling area.
PART 2 - PRODUCTS
2.01 Manufacturers
Chicago Metallic – MetalScapes™ Wire Mesh Panels
Chicago Metallic – Heavy-duty, hot dipped galvanized suspension, non-fire rated,
double web construction system. System of main runners and cross tees to form
module size of 24 inches x 24 inches or 24 inches x 48 inches in 15/16 inch (1200
system) with exposed face.
2.02 Suspension System Components
A. Main Tees:
1. Components are 144 inches long, manufactured from commercial quality
galvanized steel with factory punched cross tee slots, hanger holes and
hanger wire suspension of not less than 12 gauge, and integral end couplings.
2. Finish: Web and end couplings - baked enamel paint (01 White)(08 Black)
(44 Satin Silver Metallic)(Other color ______). Cap - (matching baked
enamel color) [Anodized Face Only(14 Chromecoat)(16 Brasscoat)(509
Coppercoat)].
B. Cross Tees:
1. Components are 48 inches and/or 24 inches long, manufactured from commercial quality galvanized steel installed perpendicular to main runners with
22
integral bayonet-style end couplings to achieve grid intersections. Cross tees
to include bulb-forward design to minimize gap between cross tee and main
tee.
C. Perimeter Treatment Components.
1.Wall Channels: Wall channels are formed from 0.020 inch (electro-galvanized steel) (aluminum) and manufactured to a C-shape, with a 3/4 inch
top leg by 1-9/16 inch I.D. and 15/16 inch bottom leg. Length is 144 inches.
Finish shall be supplied by manufacturer.
2.Wall Angle: (C3209, 1 inch wide x 2 inch high and 120 inches long). (1430,
7/8 inch high x 144 inches long) finished identical to main tees and cross
tees.
3.Infinity™ Perimeter Trim: Made from extruded aluminum [(2)(4)(6)(8)(10)
(12)] inch deep. Painted on all sides [(to match main and cross tees)(Other
painted color _________)].
D. Panels.
1.MetalScapes wire mesh panels (stainless steel), made from .031 min to
.162 wire diameter T316 stainless steel to form panels for 24 inch x 24
inch or 24 inch x 48 inch ceiling modules. MetalScapes wire mesh panels
(carbon steel) made from .040 min to .765 Cold-Rolled Steel Grade DDS to
form panels for 24 inch x 24 inch or 24 inch x 48 inch ceiling modules.
Panel Size (Nominal)
Color
Pattern
Wire Diameter
Lbs. Per
Sq. Ft.
Open
Area %
24" x 24", 24" x 48"
Stainless steel
Appalachian
.162"
1.21
89%
24" x 24", 24" x 48"
Stainless steel
Alps
0.062"
1.23
52%
24" x 24", 24" x 48"
Stainless steel
Everest
0.093" x 0.031"
1.20
79%
24" x 24", 24" x 48"
Stainless steel
Rockies
0.080" x 0.054"
1.09
52%
24" x 24", 24" x 48"
Stainless steel
Hood
0.080" x 0.047"
1.11
57%
24" x 24", 24" x 48"
Stainless steel
Atlas
0.080" x 0.080"
1.35
51%
24" x 24", 24" x 48"
Stainless steel
Ural
0.162" x 0.162"
1.78
66%
24" x 24", 24" x 48"
Stainless steel
Tyber
.120"
1.90
27%
24" x 24", 24" x 48"
Carbon steel
Aberdeen
0.04"
0.56
44%
24" x 24", 24" x 48"
Carbon steel
Erlanger
0.048"
0.50
62%
24" x 24", 24" x 48"
Carbon steel
Frankfort
0.08"
0.38
70%
24" x 24", 24" x 48"
Carbon steel
Scales
0.082"
0.38
70%
24" x 24", 24" x 48"
Carbon steel
Armor
0.365"
1.00
21%
24" x 24", 24" x 48"
Carbon steel
Lattice
0.08"
0.63
50%
2.Finish: Will be baked enamel paint on all sides (01 White) (08 Black) (44 Satin
Silver) or (Other color _____).Carbon steel panels only.
E. Hanger Wire.
1. Hanger wire: 12 gauge galvanized steel.
PART 3­— EXECUTION
3.01 Examination
Examine area receiving suspension system to identify conditions which will
adversely affect installation. Do not begin installation until adverse conditions have
been remedied.
3.02 Installation
A. Main Tees: Installed 48 inches on center, by direct suspension from existing
structure, with not less than 12 gauge steel hanger wires, wrapped tightly 3 full
turns, spaced 48 inches on center along component length.
B. Cross Tees.
1. Installed perpendicular to main tees 24 inches on center to form 24 inch x
24 inch modules.
2. Installed perpendicular to module 48 inches on center to form 24 inch x 24
inch modules or 24 inch by 48 inch modules.
C.Angle / Moldings: Installed on vertical surfaces, intersecting suspension components by appropriate method in accordance with industry accepted practice.
D. Additional Hanger Wires: Wrapped tightly 3 full turns to structure and components at locations where imposed loads could cause deflection exceeding 1/360
span.
E.Panel: Lay panels into ceiling module. Panels are directional with wires on panel
faces to be in same direction.
3.03 Repair
A.Remove damaged components, replace with undamaged components. Clean
with non-solvent based non-abrasive commercial cleaning solution.
Open Plenum
chicagometallic.com
General Conditions of Sale
Order Acceptance
Whenever used herein, “Seller” shall refer to Chicago Metallic Corporation and
“Purchaser” shall refer to the party ordering or purchasing products (“Products”)
from Seller.
Seller’s price list does not constitute an offer to sell Products listed therein, but is
simply provided as a convenience to prospective Purchasers.
Purchaser’s order to Seller shall constitute an offer to Seller to purchase Products
which offer Seller may accept at its sole discretion. Acceptance shall be by a writing
containing these General Conditions of Sale (“Conditions”). Acceptance of Purchaser’s
order or any part of it by Seller is expressly made conditional on Purchaser’s assent to
these Conditions. Purchaser may vary these Conditions only with the written consent
of Seller. Acceptance of Products by Purchaser or failure of Purchaser to object in
writing to these Conditions within ten (10) days following delivery of Products to
Purchaser shall constitute Purchaser’s assent to these Conditions.
Shipment and Delivery
Seller shall deliver Product F.O.B. place of shipment. Risk of loss to Product shall
pass to Purchaser upon delivery to carrier at such place of shipment. Carrier
acts as Purchaser’s agent. Products shall be shipped as soon as practical, or as
requested by Purchaser after order acceptance by Seller. However, delivery dates
shall not be of the essence, but shall be regarded as Seller’s best approximation
of such delivery dates.
Prices of Freight Costs
Unless otherwise indicated, prices shown on Seller’s price list are for less than
truckload quantities. The minimum truckload quantity is 24,000 pounds. Prices are
subject to change without notice and are based on full carton quantities. Prices shall
be those in effect at time of shipment of Products.
Seller shall grant Purchaser a freight allowance on all orders of 12,000 pounds or
more for a single shipment to a single destination. The allowance shall be based
on the lowest rates currently in effect from actual shipping point to destination
point or nearest port of export. In no event shall the allowance be greater than the
actual freight cost of a specific shipment. Purchaser’s request for costlier means of
shipment will be honored, but Purchaser shall be liable to Seller for the additional
freight expense. Purchaser “will-call” orders at Seller’s plant warehouse shall not
be entitled to allowance.
All taxes, tariffs, duties or similar charges paid by Seller imposed or levied by any
governmental authority in connection with the purchase, shipment, import or export
of Products purchased or in connection with the procuring of materials used therein
may at Seller’s sole option be added to the price of Products so affected. Additional
shipping charges for Products paid by Seller such as destination, storage, labor
and redelivery and special or extra expenses for handling air freight, bus or other
shipments may also, at Seller’s sole option, be added to the price of such Products.
Payment
Payment for all Products shall be net cash due and payable in U.S. dollars within thirty
(30) days following receipt by Purchaser of shipping documents for such Products
by check or bank transfer to a bank account to be designated by Seller. If accounts
are paid within ten (10) days following receipt by Purchaser of the corresponding
shipping documents, Purchaser shall been entitled to a one percent (1%) discount
from the price of Products only.
If, in Seller’s sole opinion, the financial condition of the Purchaser so warrants, Seller
may require advance payments or satisfactory security. In the event that the Purchaser fails to make such advance payments or furnish such security upon Seller’s
request, delivery of Products may be suspended without further Seller obligation.
Seller may, at Seller’s sole option, require payment by means of an irrevocable letter
of credit opened and confirmed by a bank or banks acceptable to Seller and upon
terms and conditions acceptable to Seller.
Limited Warranty
Seller warrants to Purchaser that Products will substantially conform in quantity
and quality to Purchaser’s order, as accepted by Seller, provided, however, that (1)
Products are inspected by Purchaser upon arrival at place of destination and any and
all nonconformities are noted on the bill of lading and all other delivery documents
and are attested to in writing by carrier’s representative (2) Purchaser furnishes
Seller with written notice of such non-conformities within fifteen (15) days following
arrival of non-conforming Products at the place of destination, (3) Purchaser holds
non­conforming Products for Seller’s inspection (4) non-conformities occurred prior
USA and Canada: 800.323.7164 / fax: 800.222.3744
to delivery by Seller of Products F.O.B. place of shipment, and (5) Purchaser does
not alter, repair, use or attempt to alter or repair any non-conforming Products. This
limited warranty is Seller’s only and exclusive express warranty to Purchaser. Seller
disclaims any and all implied warranties including without limitation any implied
warranty of merchantability or fitness for a particular purpose.
Purchaser’s sole and exclusive remedy against Seller shall be the replacement
F.O.B. its plant or site, at Seller’s option, of any Products which do not conform to
Seller’s limited warranty hereunder. No other remedy (including, without limita­tion,
incidental or consequential damages for lost profits, lost sales, injury to persons or
property or any other incidental or consequential loss) shall be available to Purchaser.
Purchaser agrees to include in all contracts between Purchaser and subsequent
owners or users of Products, and to bring to the attention of all Purchaser’s customers of Products, the following warranty disclaimer: Chicago Metallic Corporation
disclaims any and all warranties expressed or implied, including, without limitation,
any implied warranty of merchantability or fitness for a particular purpose. Purchaser
shall be excluded on behalf of Seller all remedies for damage or injury to Products
persons or property. In the event that Purchaser fails to comply with the foregoing
obligations, Purchaser shall indemnify Seller for any liability resulting from such
non-compliance and shall otherwise hold Seller harmless.
Returns
In order to return any Products to Seller, Purchaser must first obtain prior authorization
for products eligible for return, and receive a Return Goods Authorization number
from Seller’s home office. All authorized returns are subject to a 20% restocking
charge. Seller will only issue credit for Service Level “0” material received at the
designated company facility with the Return Goods Authorization appearing on
the material, and after being inspected and determined by Seller to be in resalable
condition. Purchaser is solely responsible for arranging and prepaying for all return
freight. Seller will not be responsible for any damage in transit on material returned
at customer’s request, and will not file freight claims on such damaged material.
When these terms are met, seller will issue appropriate material credit less the
restocking charge.
Default, Termination and Suspension of Delivery
Seller reserves the right, among other remedies, either to cancel Purchaser’s order or
suspend further deliveries of Products thereunder in the event that (1) Purchaser fails
to pay for any one shipment of Products when payment for such shipment becomes
due; (2) Purchaser fails to make any advance payments or satisfactory security
demanded by Seller pursuant to paragraph two of PAYMENTS section above; or (3)
Purchaser fails or refuses to accept any delivery of Products ordered from Seller.
Delivery of Products may be suspended in whole or in part in case of any event
beyond Seller’s control, including, but not limited to, explosion, fire, shortage of fuel,
power or raw materials flood strike lockout, injunction, riot, insurrection, war, national
emergency, government act, or act of God.
Miscellaneous
No failure or delay on the part of Seller in exercising any right, power or privilege
hereunder shall operate as a waiver thereof or of any other right, power or privilege
hereunder nor shall any single or partial exercise of any such right power or privilege preclude any other right, power or privilege. The rights or remedies of Seller
hereunder are cumulative and not exclusive of any rights or remedies which it may
otherwise have.
The parties hereto may correct stenographic and clerical errors without liability.
Purchaser may not assign the order without the express written consent of Seller.
All notices to be given hereunder by either party to the other party shall be dispatched
by certified or registered mail return receipt requested addressed to the last known
post office address of such other party. Any such notice shall be deemed received
within five (5) days following any such dispatch if mailed from within the United States
of America and ten (10) days if mailed from outside the United States of America.
Either party may change its address by notice to the other party.
These Conditions shall be governed by and interpreted in accordance with the laws
of the State of Illinois, United States of America, and all disputes hereunder that
cannot be amicably resolved by the parties thereto must be settled in a court of
competent jurisdiction within the State of Illinois, United States of America.
The provisions of these Conditions shall be severable one from the other so that
should any provision be held legally unenforceable by a court of competent jurisdic­
tion, the remaining provisions shall remain in effect.
Open Plenum
23
Ceiling Systems and Specialty Products - USA and Canada: 800.323.7164 / Fax: 800.222.3744 / chicagometallic.com
belgium / denmark / the netherlands / uk / germany / france / hong kong / china / malaysia / united arab emirates / mexico
Chicago Metallic, its logo, Fast.Easy.Customer Focused., SpanFast and QuickClick are Registered Trademarks of Chicago Metallic Corporation. Snap-Grid, Tempra and Ultraline are trademarks of Chicago Metallic Corporation.
© 2011 Chicago Metallic Corporation All Rights Reserved Printed in USA SNL0105L1311
Literature Disclaimer: Presentations in this brochure or any other Chicago Metallic Corporation publication are correct to the best of our knowledge at time of preparation. We provide this information in an advisory capacity only. Any advisory recommendations given in our publications must be modified to conform with local
codes, conditions and specifications. We reserve all rights to amend any information published in our literature without additional notice. Chicago Metallic can not be held responsible or liable for the selection nor application of our products.
linear metal
Planar
ceiling
09 53 23 - 09 54 26
®
PlanarPlus PlanarMacro MacroPlus™
®
®
product guide
Fast. Easy. Customer Focused.®
Planar ®
4 Planar Round Edge – Open Reveal
PlanarPlus® PlanarMacro®
MacroPlus™
Symmetrical Carrier
(grid available)
Recessed
Filler Strip
linear metal ceilings
Applications
Ideal for airports, transit, galleries, offices, restaurants,
corridors, auditoriums.
Features
Planar Panel
• Choice of widths, round and square edges, shallow
and deep profiles.
• Thickness and finishes for virtually any environment.
• Painted colors, reflective, anodized and vinyl wood
finishes.
• Reveals between panels can be closed or left open.
4 PlanarPlus Square Edge with Integral Filler
Symmetrical Carrier
(grid available)
• Easily incorporates lighting, air, audio and services.
• Visual design continuity from exterior to interior.
• Enhance acoustical performance with optional
perforating and Acoutex™ backer.
• Metal contains no organic compounds to support
mold or microbial growth.
• Aluminum: 100% recycled content; Steel: T-bar
Carrier is 25% recycled content. 100% locally
recyclable.
PlanarPlus Panel
with Integral Filler
6 PlanarMacro Square Edge – Open Reveal
Symmetrical Carrier
(grid available)
Recessed
Filler Strip
PlanarMacro Panel
8 MacroPlus Square Edge with Integral Filler
Symmetrical Carrier
(grid available)
PRODUCT
chicagometallic.com
UPDATES
Always up-to-date product information
is available on the web
chicagometallic.com/planar
chicagometallic.com/planarplus
chicagometallic.com/planarmacro
chicagometallic.com/macroplus
2
3
Planar Linear Metal Ceiling
MacroPlus*- Panel
with Integral Filler
chicagometallic.com
Planar ® PlanarPlus® 4 Round / Square Edge Panels
NOTE: Special panel lengths are available. Minimum order quantities apply to all products.
Please contact CMC Customer Service for details.
Product
Number
Dimensions Length Height Face
Finish
Packaging
Feet
Pieces Weight
5/8)
4)
4 Planar Round Edge – Open Reveal*
4 Planar Round Edge
58.01.044
0.025 Aluminum – Solid
58.01.044.xxx
12 5/8
31/4
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™
240
20
40
240
20
44
240
20
40
240
20
44
* Available perforated with Acoutex™ backer.
5/8)
4)
4 PlanarPlus Round Edge
58.03.012
4 PlanarPlus Round Edge – Matching Integral Filler*
0.025 Aluminum – Solid
58.03.012.xxx
12 5/8
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™
31/4
* Available perforated with Acoutex™ backer.
5/8)
4)
4 Planar Square Edge – Open Reveal*
4 Planar Square Edge
58.03.052
0.025 Aluminum – Solid
58.03.052.xxx
12 5/8
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™
31/4
* Available perforated with Acoutex™ backer.
** Unfinished (xxxU) or Finished (xxxF). Natural Wood (unperfed only).
5/8)
4)
4 PlanarPlus Square Edge
58.03.018
4 PlanarPlus Square Edge – Matching Integral Filler*
0.025 Aluminum – Solid
12 5/8
58.03.018.xxx
31/4
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™
* Available perforated with Acoutex™ backer.
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planar Linear Metal Ceiling
3
PlanarMacro® 4, 6 and 8 Square Edge Panels
NOTE: Special panel lengths are available. Minimum order quantities apply to all products.
Please contact CMC Customer Service for details.
Product
Number
Dimensions Length Height Face
Finish
Packaging
Feet
Pieces Weight
7/8)
4), 6), 8)
4 PlanarMacro Square Edge – Open Reveal*
0.032 Aluminum – Solid
4 PlanarMacro Square Edge
58.03.425
58.03.425.xxx
12 7/8 31/4
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™
168
14
25
240
20
33
240
20
81
* Available perforated with Acoutex™ backer.
6 PlanarMacro Square Edge – Open Reveal*
0.032 Aluminum – Solid**
58.03.450.xxx
12 7/8 51/4
6 PlanarMacro
58.03.450
Painted, Reflective, Anodized MetalWood II ®, WoodScenes™ * Available perforated with Acoutex backer.
** MetalWood II Finishes are laminated onto 0.024 aluminum.
™
8 PlanarMacro Square Edge – Open Reveal*
0.032 Aluminum – Solid
58.03.455.xxx
12 7/8 71/4
8 PlanarMacro
58.03.455
4
5
Planar Linear Metal Ceiling
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™ * Available perforated with Acoutex™ backer.
chicagometallic.com
MacroPlus™ 4, 6 and 8 Square Edge Panels
NOTE: Special panel lengths are available. Minimum order quantities apply to all products.
Please contact CMC Customer Service for details.
Product
Number
Dimensions Length Height Face
Finish
Packaging
Feet
Pieces Weight
7/8)
4), 6), 8)
4 MacroPlus Square Edge – Matching Integral Filler*
0.032 Aluminum – Solid
4 MacroPlus
58.03.426
58.03.426.xxx
12 7/8 31/4
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™ 168
14
25
120
10
35
8
33
* Available perforated with Acoutex™ backer.
6 MacroPlus Square Edge – Matching Integral Filler*
0.032 Aluminum – Solid
58.03.451.xxx
12 7/8 51/4
6 MacroPlus
58.03.451
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™ * Available perforated with Acoutex™ backer.
** MetalWood II Finishes are laminated onto 0.024 aluminum. 6 MacroPlus Square Edge – Matching Integral Filler
8 MacroPlus Square Edge – Matching Integral Filler*
0.032 Aluminum – Solid
58.03.460.xxx
12 7/8 71/4
8 MacroPlus
58.03.460
Painted, Reflective, Anodized
MetalWood II ®, WoodScenes™ 96
* Available perforated with Acoutex backer.
USA and Canada: 800.323.7164 / fax: 800.222.3744
™
Planar Linear Metal Ceiling
5
Filler Strips / Splices / End Plugs
NOTE:
Minimum order quantities
apply to all products.
Product
Number
Dimensions Length Height Face
Finish
Packaging
Feet
Pieces Weight
Filler Strips – Aluminum (for Planar / PlanarMacro)
Recessed
Recessed Filler Strip
58.01.009 - 58.01.011
3
58.01.009.xxx
12
–
/4
Painted Colors, MetalWood II ®,
240
WoodScenes™, Reflective, Anodized
20
15
Recessed for Expansion Carrier
3
58.01.011.xxx
12
–
/4
Painted Colors, MetalWood II ®,
240
WoodScenes™, Reflective, Anodized
20
21
Splices - Aluminum
4 Planar/PlanarPlus – Round Edge / Square Edge
58.01.004.xxx
–
–
31/4
Splice
58.01.004-58.03.525
58.03.530-58.03.535
4 PlanarMacro/MacroPlus
58.03.525.xxx
–
–
31/4
6 Planar/PlanarPlus
58.03.530.xxx
–
–
51/4
8 Planar/PlanarPlus
58.03.535.xxx
–
–
71/4
Product Number
6
7
Dimensions
Height
Face
Painted Colors, MetalWood II ®,
WoodScenes™, Reflective, Anodized
–
50
4
Painted Colors, MetalWood II ®,
WoodScenes™, Reflective, Anodized
–
50
5
Painted Colors, MetalWood II ®,
WoodScenes™, Reflective, Anodized
–
50
5
Painted Colors, MetalWood II ®,
WoodScenes™, Reflective, Anodized
–
50
5
Description
Minimum Order Quantity
Pieces
Weight
End Plug Round Edge
58.01.052
End Plugs – Aluminum
End Plug Square Edge
58.01.171, 58.03.625,
58.03.630, 58.03.635
4˝ Planar/PlanarPlus – Round Edge
58.01.052.xxx
5/8˝
3 1/4˝
58.01.052.xxx
5/8˝
3 1/4˝
58.01.052.xxx
5/8˝
3 1/4˝
Standard Colors
Premium Colors and Finishes
WoodScenes
100
100
100
1
1
1
4˝ Planar/PlanarPlus – Square Edge
58.03.171.xxx
5/8˝
3 1/4˝
58.03.171.xxx
5/8˝
3 1/4˝
58.03.171.xxx
5/8˝
3 1/4˝
Standard Colors
Premium Colors and Finishes
WoodScenes
100
100
100
1
1
1
4˝ PlanarMacro/MacroPlus – Square Edge
58.03.625.xxx
7/8˝
3 1/4˝
Standard Colors
58.03.625.xxx
7/8˝
3 1/4˝
Premium Colors and Finishes
58.03.625.xxx
7/8˝
3 1/4˝
WoodScenes
100
100
100
1
1
1
6˝ PlanarMacro/MacroPlus – Square Edge
58.03.630.xxx
7/8˝
5 1/4˝
Standard Colors
58.03.630.xxx
7/8˝
5 1/4˝
Premium Colors and Finishes
58.03.630.xxx
7/8˝
5 1/4˝
WoodScenes
100
100
100
1
1
1
8˝ PlanarMacro/MacroPlus – Square Edge
58.03.635.xxx
7/8˝
7 1/4˝
Standard Colors
58.03.635.xxx
7/8˝
7 1/4˝
Premium Colors and Finishes
58.03.635.xxx
7/8˝
7 1/4˝
WoodScenes
100
100
100
1
1
1
Planar Linear Metal Ceiling
chicagometallic.com
Planar ® PlanarPlus® PlanarMacro® MacroPlus™ Suspension
NOTE: Minimum order quantities apply to all products.
Product
Number
Length
Description
Packaging
Feet
Pieces Weight
12
12
12
12
12
10
10
Symmetrical Carrier – Aluminum*
Radius Symmetrical Carrier – factory curved**
Expansion Carrier – 41/8 for 4 and 8 Panels
T-Bar Carrier for 4 and 8 Panels – Steel
T-Bar Carrier for 6 Panels – Steel
Radius Carrier – 2 for 6 Panels
Radius Carrier – 4 for 4 and 8 Panels
Suspension
Symmetrical Carrier
58.01.007
Expansion Carrier
58.01.022
Carriers
58.01.007.008
Per Order
58.01.022.008
1500.08C
1501.08C
58.01.008.008
58.01.005.008
240
240
240
144
144
200
200
20
20
20
12
12
20
20
47
47
47
23
23
40
40
58.01.403.008
–
Symmetrical Carrier Splice
–
–
58.01.028.008 4913/16 Interior Stabilizer Bar for Symmetrical Carrier
58.01.029.008 3513/16* Exterior Stabilizer Bar - Symmetrical Carrier
–
1503.08H
4
Cross Tee for T-Bar Carrier
200
10.00.828.000H 4
Spacer Bar for T-bar Carrier
160
58.01.318.000
–
Retainer Clip - Separate filler used
–
58.01.317.000
–
Retainer Clip - Integral filler used
–
Access Door Assembly Kit
58.01.058
–
(2 Hinge Assemblies, 4 Retainer Clips, 2 Retainer Bars)
100
50
50
50
40
500
500
4
17
12
38
29
4
4
–
1
* Symmetrical carrier is required on all exterior applications.
** For radius symmetrical carrier specify radius at time of order. Curving available concave only.
Accessories
T-Bar Carrier
1500.08C-1501.08C
Radius Carrier
58.01.008-58.01.005
* 2( Stabilizer Bar available as a special. Please contact CMC Customer Service.
Splice
58.01.403
Stabilizer Bar
58.01.028 - 58.01.029
Cross Tee
1503.08H
Spacer Bar
10.00.828.000
Retainer Clip
58.01.318 - 58.01.317
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planar Linear Metal Ceiling
7
Linear Metal Panel Access Door Treatment - Interior / Exterior
For INTERIOR Use Only
Latching Bar
(Drill bar holes to match
Carrier holes. Attach with
(2) 3/16 pop rivets)
Stationary
Carrier
Access Door
Carrier
Stationary
Carrier
Hinge
Attach with (2) 3/16 pop rivets
Notch Filler Flange
For clearance
Bolt and Nut
3/16 x 1-1/4
Leave room at ends of Carrier for hinges,
latch clips or latch bars
Self-tapping Screw
Recessed Filler Strips
(Flatten ends and centers for fastening)
Attach with self-tapping screws
Retainer Clip
(Attach with 3/16 pop rivets
using existing Carrier holes)
For EXTERIOR Use Only
58.01.056.900 Stop Bar
Stationary
Carrier
#
Access Door Carrier
12 ga. electrogalvanized hanger
wire (by others)
Strut and attachment to deck
(by others)
Trim PlanarMacro Plus panel & Planar
carrier as required for clearance
Drill 3/4) diameter access hole in
PlanarMacro Plus panel
Secure access door to stop bar with
1/4 - 20 x 1) lg. hex washer head screw
(by others).
11/2) wide x 9/16) flange x 20 ga. cold rolled
steel channel stabilizer - both sides of
opening (by others)
Stabilizer Bar @ 36) or
less O.C. spacing
DETAIL A
10 self-tap screw (by others)
18 ga. tie wire (by others)
#
#
58.01.056.900 Stop Bar (2 places) - attach with (2) 1/4 - 20 machine
screws & (2) 1/4 - 20 hex nuts (by others) see DETAIL A
Hinge (attach with (2)
3 16
/ ) pop rivets)
Notch filler flange for
clearance
3 16
/ ) x 11/4) bolt & nut
Access Door Carrier
Use self-tapping screws. Fasten 4) from edge to
accomodate latch parts (by others)
8
9
Planar Linear Metal Ceiling
Stationary Carrier
1 / ) wide x / ) flange x 20 ga. steel channel stiffener
-flatten one channel in center for fastening (by others)
12
9 16
NOTE: Exterior soffit design and engineering is
Contractors responsibility. Consult with an Engineer to
evaluate the suitability of the system for the intended
application.
chicagometallic.com
Linear Metal Panel Curved Treatment - Factory / Field
FACTORY Planar Symmetrical Carrier for CONCAVE Treatments
Note: Factory curved carriers are not available for convex applications
12( minimum radius
Planar carrier
Vertical Slot
Vertical Slot
Planar pan
FIELD Modified Planar Symmetrical Carrier
for CONVEX Treatments
of 4) Planar Only
FIELD Modified Planar Symmetrical Carrier
for CONCAVE Treatments
of 4) Planar Only
Shown using 4) Planar Round Edge Panels
Contact CMC Tech Services for instructions using other panel options
Shown using 4) Planar Round Edge Panels
Contact CMC Tech Services for instructions using other panel options
Saw cut, down to horizontal shoulder of carrier
between tabs without stabilizer slots
Cut out "Vee" sections, down to horizontal
shoulder of carrier
Do Not Cut Carrier in area
above tabs that hold panels
Do Not Cut Carrier in area
above tabs that hold panels
Form carrier
and filler strip to
desired shape and
screw attach, or
pop-rivet, filler strip
to carrier on both
sides of cut
Form carrier and filler strip to desired shape and
screw attach, or pop-rivet, filler strip to carrier on
both sides of cut
4) Planar round edge pan
Tek-screw
or pop rivet
Filler Strip
Tek-screw
or pop rivet
4) Planar
round edge
pan
Filler Strip
Symmetrical
Carrier
Symmetrical
Carrier
Section A-A
USA and Canada: 800.323.7164 / fax: 800.222.3744
Section A-A
Planar Linear Metal Ceiling
9
Planar ® PlanarMacro® Perimeter Treatments & Accessories
NOTE: Minimum order quantities apply to all products.
Product
Number
Dimensions
Length Height Face
Description
LF
Packaging
Pieces Weight
Painted, Reflective, MetalWood II ®
120
10
10
Wall Channels – Planar – Aluminum with a Hemmed Edge
58.03.017.xxx
10 113/16 17/8 x 1
Anodized, MetalWood II ® 100
10
14
Wall Channels – PlanarMacro – Aluminum with a Hemmed Edge
58.03.717.xxx
10
2 15/8 x 1
Anodized, MetalWood II ®
100
10
14
Custom Trims (PVC)
1
38.35.995.000
10
2
/2
38.90.131.xxx Per Order
100
–
10
–
10
–
Wall Angles – Aluminum with Hemmed Edges
38.90.124.xxx
Wall Angles
38.90.124
12
/4
3
15
/16
Flexible Angle-Aluminum-Bare
Special Sections
Wall Channels
58.03.017 - 58.03.717
Product
Number
Roll
Size
Roll
Width
Description
Sq. Ft.
Packaging
Per Roll Pieces
Weight
Acoustical Blanket – Vinyl Facing One Side
Custom Trims
38.35.995.000 38.90.131
58.01.103.008
58.01.060.008
58.01.104.008
58.01.102.008
100
100
100
100
48
48
48
48
Duct Liner – Black with No Facing
58.01.105.008
100
48
1 x 1 lb. - Black
1 x 11/2 lb. - Black
11/2 x 1 lb. - Black
11/2 x 11/2 lb. - Black
400
400
400
400
1
1
1
1
56
76
58
78
1 x 11/2 lb.
400
1
76
Note: Please consult CMC Customer Service for Panel Cutting Tool and pricing.
10 Planar Linear Metal Ceiling
11
chicagometallic.com
Planar ® PlanarMacro® Air Distribution
NOTE: Minimum order quantities apply to all products.
Product
Number
Description
Packaging
Pieces Weight
Air Diffusers
2-Slot Diffuser
58.01.072
4-Slot Diffuser
58.01.074
58.01.072
58.01.074
58.01.076
58.01.078
58.01.108
58.01.107
Notes:
2 slot unit, 8 collar, 9 width
4 slot unit, 10 collar, 17 width
6 slot unit, 12 collar, 25 width
8 slot unit, 14 collar, 33 width
Round Edge Planar Pattern Control
Macro and Square Edge Planar Pattern Control
1
1
1
1
1
1
10
13
16
20
1
1
Number of slots based on 4 panels.
One pattern control is needed for each slot opening on air supply units.
Standard collars are top mounted. Oval, side inlet collars are special order.
Air diffusers are compatible with Symmetrical Carrier only.
6-Slot Diffuser
58.01.076
8-Slot Diffuser
58.01.078
Air diffusers are designed to install as tailored components to the Planar Linear Metal Ceiling System. Dimensions of the Affinitrol
Air Diffuser are compatible with ceiling panels and carriers. The Affinitrol air chamber spans the 50” area between carriers.
Planar
USA and Canada: 800.323.7164 / fax: 800.222.3744
PlanarMacro
Planar Linear Metal Ceiling 11
System Treatments
Perforation Option
Perimeter Treatments***
T Pattern
Wall angle - recessed
0.0625 diameter holes
0.216 lineal centers
.125 border
7.6% open area
Color Options
Wall angle - flush
Standard Painted Colors
01 White
02 Black
44 Satin Silver
Wall channel
Wall channel - floating
Infinity™ perimeter trim
End cap
*** Reference Wall Angles and Channels on p. 10.
See Infinity Product Guide for other trim options.
Premium Painted Colors
03 Bronze
21 Copper Metallic
23 Sandstone
88 Flat Black
113 Straw
167 Brick Red
174 Garnet
215 Forest Green
246 Federal Indigo
256 True Blue
263 Plum
270 Pearl Gray
379 Gloss White
386 Gloss Black
401 Maple*
402 Oak*
403 Cherry*
404 Pumpkin Maple*
405 Karri*
425 Wet Clay
428 Yellow Flash
429 Silver Lining
430 Beige Breeze
431 Whitewash
432 Blonde Wood
437 Midnight Blue
438 Royal Amethyst
442 Burgundy Brick
443 Toffee Fate
447 Cinnamon
449 Fortune Gray
455 Cocoa Shell
495 Cardinal Red
510 Morning Dew Metallic
511 Autumn Metallic
512 Moon Glow Metallic
513 Sun Gold Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
520 Polar White
521 Nickel
524 Silver
WoodScenes™ Painted Colors
800 Lazy Maple
801 Aged Teak
802 Vintage Burlwood
803 Burnished Cherry
804 Sleek Cherry
805 Weathered Oak
Reflective Finishes
369 Brushed Gold**
378 Brushed Aluminum**
Anodized Finishes
14 Chromecoat Anodized
16 Brasscoat Anodized
504 Satin Silver Anodized
509 Copper Coat Anodized
MetalWood II ® Finishes*
401 Maple
402 Oak
403 Cherry
404 Pumpkin Maple
405 Karri
650R Maple
651R Cherry
652R Pumpkin Maple
653R Oak
654R Karri
655R Bamboo
* Coordinating Solid Paint Colors to MetalWood II® Finishes
** 4" Planar Only
12 Planar Linear Metal Ceiling
13
chicagometallic.com
Specification Data
Product information for integration into ceiling specification
panel type
Planar
PlanarPlus
PlanarMacro
MacroPlus
material
painted aluminum
•
•
•
•
reflective and anodized aluminum
•
•
•
•
Wood laminates only
•
•
MetalWood II ® wood grain finishes and vinyl laminate
•
•
•
•
WoodScenes painted colors
•
•
•
•
surface
solid and perforated1
•
•
•
•
4 x 5/8
4 x 5/8
•
•
™
size
nominal panel width x depth
edge
square
round
•
•
reveal
open with optional filler strip
•
•
integral filler strip
•
•
fire
class A: flame 0, smoke 0 per ASTM E 841
•
•
•
•
sound
NRC - solid with open reveal
0.602
0.602
NRC - perforated with open reveal
0.553, 0.952
NRC - perforated with closed reveal
0.70 , 0.95 0.70 , 0.95 0.703, 0.952
0.703, 0.952
performance
interior, seismic and exterior environments4
•
•
•
•
suspension
aluminum symmetrical carrier (straight and curved)
•
•
steel grid carrier
•
•
•
aluminum radius carrier
•
•
lights and air
linear integrated lighting and air diffusers
•
•
•
•
classification
type XX, pattern C, G per ASTM E 1264
•
•
•
•
warranty
1 year limited
•
•
•
•
sustainability
Aluminum: 100% recycled content; Steel: T-Bar Carrier is
•
•
25% recycled content. 100% locally recyclable.
1 - Excluding laminated.
2 - With 1-1/2, 1-1/2 lb. acoustical blanket
3 - Perforated with Acoutex™ backer
4 - Consult with an engineer to evaluate the suitability of the system for the intended application.
•
•
USA and Canada: 800.323.7164 / fax: 800.222.3744
3
2
3
4, 6,8 x 7/8 4, 6,8 x 7/8
•
•
0.553, 0.952
2
•
Planar Linear Metal Ceiling 13
Planar ® PlanarPlus® Specification Data
Though Planar/PlanarPlus are meant for interior and exterior applications, Specifications as shown here pertain to interior applications only.
Contact Chicago Metallic for guidelines specifically applicable to exterior use of Planar/PlanarPlus products.
PART 1 - GENERAL
1.01 Scope
Provide Linear Metal Ceiling System.
1.02 Related Sections
A. Section 095100 - Acoustical Ceilings
B. Section 096300 - Acoustical Ceiling Suspension
C. Section 095400 - Specialty Ceilings
D. Section 210000 - Fire Suspension
E. Section 220000 - Plumbing
F. Section 230000 - HVAC
G. Section 265000 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C 423 - Test Method for Sound Absorption and Sound Absorption Coefficients by
the Reverberation Room Method.
2. C 635 - Standard Specification for the manufacture, performance, and testing of
Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
3. C 636 - Standard Practice for Installation of Metal Ceiling Suspension Systems for
Acoustical Tile and Lay-in Panels.
4. E 84 - Test Method for Surface Burning Characteristics of Building Materials.
5. E 580 - Practice for Application of Ceiling Suspension Systems for Acoustical Tile
and Lay-In Panels in Areas Requiring Seismic Restraint.
6. E 795 - Practices for Mounting Test Specimens During Sound Absorption Tests.
1.04 Submittals
A. Product data: Manufacturers standard data sheets listing dimensions and details.
B. Samples: Manufacturers standard samples including suspension, panels and colors.
C. Shop Drawings: Reflected ceiling plan and elevation drawings indicating ceiling layouts,
dimensions and perimeter conditions.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to suspension system
installation.
3. Installation to begin only when temperature and humidity conditions closely approximate interior conditions to exist when area is occupied.
4. Heating and air conditioning systems to be operating prior to, during, and after
installation.
5. Deliver materials in manufacturers original packaging, unopened and undamaged.
6. Store materials in an enclosed dry location at room temperature and protect from
soiling, damage, moisture and humidity.
1.06 Maintenance
Furnish extra material equal to ____ percent of ceiling area.
PART 2 - PRODUCTS
2.01 Manufacturer
(Planar)(PlanarPlus) linear metal ceiling systems as manufactured by Chicago Metallic, 4849
South Austin Avenue, Chicago, Illinois 60638. 1-800-323-7164.
2.02 Materials
A. Linear Metal Panels:
1. Manufactured from (0.025) inch thick aluminum nominal 4 inches wide by (144)(__)
inches long by 5/8 inch deep.
a. Planar with (round)(square) edges.
b. PlanarPlus with (round)(square) edges and integral filler strips.
2. Finish: (Painted _____)(Reflective _____)(Anodized _____)(MetalWood® laminated
vinyl _____)(WoodScenes™ Painted _____).
3. [(Unperforated)(Perforated with pattern T)] [(with)(without)] Acoutex™ non-woven
membrane factory bonded to panel backside.
B. Accessories
1. Planar Recessed Filler Strips: Manufactured from aluminum 3/4 inch wide by 144
inches long coated to (match panel)( _____ color) with linear metal panels.
to linear metal panels.
b. Wall Angles: Manufactured from 0.025 inch thick aluminum 15/16 inch wide by 3/4
inch high by 144 inches long with hemmed edges. Coated identical to linear metal
panels.
C. Suspension System
1. Symmetrical Carrier:
a. Manufactured to an inverted “U” shape from 0.040 inch aluminum 144 inches
long. Coated with black polyester enamel.
Architect Note: Double grip carrier required on all exterior applications.
b. Slotted at appropriate intervals to receive stabilizing components as described
below.
2. Stabilizer Bars: Manufactured from 0.040 inch thick aluminum (49 13/16)(35 13/16) inch
long. Coated with black polyester enamel.
3. Radius Carrier: Manufactured to an inverted “U” shape from 0.040 inch thick aluminum
120 inches long with integral carrier tabs, painted black.
4. Expansion Carrier: Manufactured to an inverted “U” shape from 0.040 inch thick
aluminum 144 inches long with integral carrier tabs spaced 4 1/8 inches. Coated with
black polyester enamel.
D. Acoustical Material
1. Blanket type black vinyl faced one side (1)(11/2) inches thick by (1)(11/2) pounds per
cubic foot density.
2. Black matte ductliner 1 inch thick by 11/2 pounds per cubic foot.
3. Acoutex™ non-woven fiber factory adhered to back of perforated panels.
E. Air Diffusion
1. Air Units:
a. (2)(4)(6)(8) slot with (8)(10)(12)(14) inches wide (dampered)(undampered) top
mounted collars.
b. Manufactured from 0.024 inch thick steel with gasketed lower flanges and factory
applied acoustical insulation adhered to internal surfaces.
c. “L” shaped directional vanes painted black.
d. Optional remote control damper assembly with control cable extending through
air distribution slot.
PART 3 - EXECUTION
3.01 Examination
Examine area receiving system to identify conditions which will adversely affect installation.
Do not begin installation until adverse conditions have been remedied.
3.02 Installation (Interior Only)
A. Suspension System
1. Symmetrical Carriers: Installed 50 inches on center by direct suspension from existing
structure with not less than 12 gauge hanger wires wrapped tightly 3 full turns, spaced
48 inches on center.
2. Stabilizer Bars: Installed perpendicular to symmetrical carrier (24)(36)(48) inches on
center.
B. Linear Metal Panels and Accessories
1. Linear Metal Panels:
a. Attach to Main Carrier tabs and connect with Panel Splices with joints staggered
in adjacent rows.
2. Slip-on Moldings: Install on exposed ends of panels.
3. End Plugs: Installed exposed ends of panels.
4. Wall Angles: Installed on vertical surfaces intersecting system by appropriate method
in accordance with industry accepted practice.
5. Filler Strips: Installed into open reveal between panels.
6. Access Panels: Installed in accordance with manufacturers recommendations.
C.Integrated Accessories
1. Insulation trimmed to fit and installed in plenum between carriers.
3.03 Repairs
A. Remove damaged components, replace with undamaged components. Clean with
non-solvent, non-abrasive commercial cleaning solution.
2. Panel Splices: Manufactured from 0.025 inch thick aluminum 8 3/4 inches long coated
with (black baked-on polyester enamel)(finish identical to linear metal panels), with
profile compatible with linear panels.
3. End Plugs: Manufactured from 0.025 inch thick aluminum with (round)(square) edges.
Coated identical to linear metal panels.
4. Perimeter Trim
a. Perimeter Caps: Manufactured from 0.025 inch thick aluminum 113/16 inch I.D.
by 17/8 inch top flange by 1 inch bottom flange by 120 inches long. Coated identical
14 Planar Linear Metal Ceiling
15
chicagometallic.com
PlanarMacro® MacroPlus™ Specification Data
Though PlanarMacro/MacroPlus are meant for interior and exterior applications, Specifications as shown here pertain to interior applications only.
Contact Chicago Metallic for guidelines specifically applicable to exterior use of PlanarMacro/MacroPlus products.
PART 1 - GENERAL
1.01 Scope
Provide Linear Metal Ceiling System.
1.02 Related Sections
A. Section 095100 - Acoustical Ceilings
B. Section 096300 - Acoustical Ceiling Suspension
C. Section 095400 - Specialty Ceilings
D. Section 210000 - Fire Suspension
E. Section 220000 - Plumbing
F.
Section 230000 - HVAC
G. Section 265000 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C 423 - Test Method for Sound Absorption and Sound Absorption Coefficients by the
Reverberation Room Method.
2. C 635 - Standard Specification for the manufacture, performance, and testing of Metal
Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
3. C 636 - Standard Practice for Installation of Metal Ceiling Suspension Systems for
Acoustical Tile and Lay-in Panels.
4. E 84 - Test Method for Surface Burning Characteristics of Building Materials.
5. E 580 - Practice for Application of Ceiling Suspension Systems for Acoustical Tile and
Lay-In Panels in Areas Requiring Seismic Restraint.
6. E 795 - Practices for Mounting Test Specimens During Sound Absorption Tests.
1.04 Submittals
A. Product data: Manufacturers standard data sheets listing dimensions and details.
B. Samples: Manufacturers standard samples including suspension, panels and colors.
C. Shop Drawings: Reflected ceiling plan and elevation drawings indicating ceiling layouts,
dimensions and perimeter conditions.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to suspension system installation.
3. Installation to begin only when temperature and humidity conditions closely approximate
interior conditions to exist when area is occupied.
4. Heating and air conditioning systems to be operating prior to, during, and after installation.
5. Deliver materials in manufacturers original packaging, unopened and undamaged.
6. Store materials in an enclosed dry location at room temperature and protect from soiling,
damage, moisture and humidity.
1.06 Maintenance
Furnish extra material equal to ____ percent of ceiling area.
PART 2 - PRODUCTS
2.01 Manufacturer
(PlanarMacro)(MacroPlus) linear metal ceiling systems as manufactured by Chicago Metallic,
4849 South Austin Avenue, Chicago, Illinois 60638. 1-800-323-7164.
2.02 Materials
A. Linear Metal Panels:
1. a. PlanarMacro manufactured from (0.032)(0.040) inch thick aluminum nominal (4)(6)
(8) inches wide by (144)(__) inches long with square edges by 7/8 inch deep.
b. MacroPlus manufactured from 0.032 inch thick aluminum nominal (4)(6)(8) inches wide
by (144)(__) inches long by 7/8 inch deep. with square edges and integral filler strips.
2. Finish: (Painted _____)(Reflective _____)(Anodized _____)(MetalWood® laminated
vinyl _____)(WoodScenes™ Painted _____).
3. [(Unperforated)(Perforated with pattern T)] [(with)(without)] Acoutex™ non-woven
membrane factory bonded to panel backside.
C. Accessories
1. PlanarMacro Recessed Filler Strips: Manufactured from aluminum 3/4 inch wide by 144
inches long coated to (match panel) ( _____ color) with linear metal panels.
2. Panel Splices: Manufactured from 0.032 inch thick aluminum 8 3/4 inches long coated
with (black baked-on polyester enamel)(finish identical to linear metal panels), with
profile compatible with linear panels.
3. End Plugs: Manufactured from 0.032 inch thick aluminum with (round) (square) edges.
Coated identical to linear metal panels.
USA and Canada: 800.323.7164 / fax: 800.222.3744
4. Perimeter Trim
a. Perimeter Caps: Manufactured from 0.025 inch thick aluminum 2 inch I.D. by 15/8
inch top flange by 1 inch bottom flange by 120 inches long. Coated identical to linear
metal panels.
b. Wall Angles: Manufactured from 0.025 inch thick aluminum 15/16 inch wide by 3/4 inch
high by 144 inches long with hemmed edges. Coated identical to linear metal panels.
C. Suspension System
1. Symmetrical Carrier:
a. Manufactured to an inverted “U” shape from 0.040 inch aluminum 144 inches long.
Coated with black polyester enamel.
Architect Note: Double grip carrier required on all exterior applications.
b. Slotted at appropriate intervals to receive stabilizing components as described
below.
2. Stabilizer Bars: Manufactured from 0.040 inch thick aluminum (49 13/16) (35 13/16) inch
long. Coated with black polyester enamel.
3. Radius Carrier: Manufactured to an inverted “U” shape from 0.040 inch thick aluminum
120 inches long with integral carrier tabs, painted black.
4. Expansion Carrier: Manufactured to an inverted “U” shape from 0.040 inch thick aluminum 144 inches long with integral carrier tabs spaced 41/8 inches. Coated with black
polyester enamel.
D. Acoustical Material
1. Blanket type black vinyl faced one side (1)(11/2) inches thick by (1)(11/2) pounds per
cubic foot density.
2. Black matte ductliner 1 inch thick by 11/2 pounds per cubic foot.
3. Acoutex™ non-woven fiber factory adhered to back of perforated panels.
E. Air Diffusion
1. Air Units:
a. (2)(4)(6)(8) slot with (8)(10)(12)(14) inches wide (dampered)(undampered) top
mounted collars.
b. Manufactured from 0.024 inch thick steel with gasketed lower flanges and factory
applied acoustical insulation adhered to internal surfaces.
c. “L” shaped directional vanes painted black.
d. Optional remote control damper assembly with control cable extending through air
distribution slot.
PART 3 - EXECUTION
3.01 Examination
Examine area receiving system to identify conditions which will adversely affect installation. Do
not begin installation until adverse conditions have been remedied.
3.02 Installation (Interior Only)
A. Suspension System
1. Symmetrical Carriers: Installed 50 inches on center by direct suspension from existing
structure with not less than 12 gauge hanger wires wrapped tightly 3 full turns, spaced
48 inches on center.
2. Stabilizer Bars: Installed perpendicular to symmetrical carrier (24)(36)(48) inches on
center.
B. Linear Metal Panels and Accessories
1. Linear Metal Panels:
a. Attach to main carrier tabs and connect with Panel Splices with joints staggered in
adjacent rows.
2. Slip-on Moldings: Install on exposed ends of panels.
3. End Plugs: Installed exposed ends of panels.
4. Wall Angles: Installed on vertical surfaces intersecting system by appropriate method in
accordance with industry accepted practice.
5. Filler Strips: Installed into open reveal between panels.
6. Access Panels: Installed in accordance with manufacturers recommendations.
C. Integrated Accessories
1. Insulation trimmed to fit and installed in plenum between carriers.
3.03 Repairs
A.Remove damaged components, replace with undamaged components. Clean with nonsolvent non-abrasive commercial cleaning solution.non-solvent based non-abrasive
commercial cleaning solution.
Planar Linear Metal Ceiling 15
Ceiling Systems and Specialty Products - USA and Canada: 800.323.7164 / Fax: 800.222.3744 / www.chicagometallic.com
belgium / denmark / the netherlands / uk / germany / france / hong kong / china / malaysia / united arab emirates / mexico
Chicago Metallic, its logo, Planar, PlanarPlus, PlanarMacro and MetalWood II are Registered Trademarks of Chicago Metallic Corporation. Acoutex, Infinity, WoodScenes and MacroPlus are trademarks
of Chicago Metallic Corporation.
© 2011 Chicago Metallic Corporation All Rights Reserved Printed in USA SNL0085L1311
Literature Disclaimer: Presentations in this brochure or any other Chicago Metallic Corporation publication are correct to the best of our knowledge at time of preparation. We provide this information in an advisory capacity only. Any advisory recommendations given in our publications must
be modified to conform with local codes, conditions and specifications. We reserve all rights to amend any information published in our literature without additional notice. Chicago Metallic can not be held responsible or liable for the selection nor application of our products.
metal panel Ceiling 09 51 33
Planostile™ Metal Panel Ceilings
product guide
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planostile Metal Panel
1
Planostile™
Lay-in
metal panel
Applications
Ideal for exterior soffits, airports, hotels, lobbies,
corridors.
Features
• Attractive and durable metal panels for grid-based
suspension systems in standard and custom sizes.
• Range of profiles and options offer great design
flexibility.
• Integrates with variety of grid suspension systems.
/16
5
• Grid suspension accepts industry standard light and
air diffusers.
/16
9
/16, 15/16, 1 3/8
9
• Standard perforation patterns and custom
perforating.
Square, lay-in (MF/AMF)
Reveal, lay-in (ME/AME)
• Snap-in system designed to withstand positive and
negative wind pressure (UL580).
• MetalWood™ woodgrain and WoodScenes™ painted
finishes.
• Enhance acoustical performance with optional
backing material.
/16
5
/16
5
/16
• Metal contains no organic compounds to support
mold or microbial growth.
9
15
Reveal, lay-in (ME/AME)
Reveal, lay-in (MC/AMC)
/16
• Building system integration flexibility (HVAC,
lighting).
• Sustainable: Aluminum 100% recycled content, Steel
75%. 100% locally recyclable at end of useful life.
Snap-in
2-1/2
Snap-in square
(MA/AMA)
2-1/2
Snap-in bevel
(MA461/AMA461)
(24 x 24 only)
Always up-to-date product information
is available on the web
chicagometallic.com/planostile
2
Planostile Metal Panel
chicagometallic.com
Lay-in Square Edge Panels
Lay-in Square Edge (MF/AMF)
11/2
(9/16)(15/16)(13/8)
Product
Panel
Packaging
Number
Size
Sq. Ft.
Pieces
Weight
Lay-in Square Edge — for 9/16, 15/16, 13/8 Grid
0.024 Galvanized Steel
MF463XxxxX
MF483XxxxX
24 x 24
24 x 48
0.024 600 Stainless Steel 2B
Solid Only
MF463X02BX
24 x 24
0.032 Aluminum
Solid**
AMF463XxxxX
AMF483XxxxX
24 x 24
24 x 48
56
14
32
PTO*PTO*PTO*
56
14
32
56
14
31
PTO*PTO*PTO*
Lay-in Reveal Edge (MC/AMC)
13/4
(15/16)(15/16)(15/16)
Product
Number
Panel
Size
Sq. Ft.
Packaging
Pieces
Weight
Lay-in Reveal Edge — for 15/16 Grid
0.024 Galvanized Steel
Solid
MC463XxxxX
MC483XxxxX
24 x 24
24 x 48
641631
PTO*PTO*PTO*
0.032 Aluminum
Solid
AMC463XxxxX
AMC483XxxxX
24 x 24
24 x 48
641631
PTO*PTO*PTO*
* PTO – Packaged To Order
** MetalWood II finished aluminum panels are constructed from 0.024 base aluminum metal with
0.008 vinyl laminate for a total panel thickness of 0.032
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planostile Metal Panel
3
Lay-in Reveal Edge Panels
Lay-in Reveal Edge (ME/AME)
13/4
(9/16)Square (9/16) Square(9/16)
Product
Number
Panel
Size
Sq. Ft.
Packaging
Pieces
Weight
Lay-in Reveal Edge— for 9/16 Grid
0.024 Galvanized Steel
Solid
ME463XxxxX
ME483XxxxX
24 x 24
24 x 48
641632
PTO*PTO*PTO*
0.032 Aluminum
Solid**
AME463XxxxX
AME483XxxxX
24 x 24
24 x 48
641631
PTO*PTO*PTO*
* PTO – Packaged To Order
** MetalWood II finished aluminum panels are constructed from 0.024 base aluminum metal with
0.008 vinyl laminate for a total panel thickness of 0.032
4
Planostile Metal Panel
chicagometallic.com
Lay-in Suspension
ProductDimensions Weight
Number
LengthHeight Face
Slots Per Piece
Main Tee
10.00.200
15/16 Grid
Main Tee (Heavy Duty)
10.00.200.xxxH
1211/2
Main Tee (Intermediate Duty)
10.00.250.xxxH
1211/2
Main Tee
10.00.250
Cross Tees – Stab-in/Butt Cut
10.01.209.xxxH
411/2
10.01.229.xxxH
211/2
/1624 4
15
/1624 3
15
/163 1
/16
0
0.5
15
15
9/16 Grid
Main Tee (Heavy Duty)
10.04.040.xxxH
Cross Tee
10.01.209
10.01.229 - No Slots
Main Tee
10.04.040
1211/2
Main Tee (Intermediate Duty)
10.04.000.xxxH
1211/2
Cross Tees – Stab-in
10.04.014.xxxCH
10.04.022.xxxCH
411/2
211/2
/1624 4
9
/1624 3
9
9
/163 1
/16
0
0.5
9
Product
Number
Description
Wall Angle – Aluminum with Hemmed Edges
38.90.124.xxx12 x 3/4 x 15/16
Weight
Per Piece
1.2
*Reflective and Anodized finishes on one side only.
Main Tee
10.04.000
Wall Channel — Steel
60.00.010.xxx10 x 19/16 x 3/4 x 15/162.2
Wall Channel — Aluminum
60.00.011.xxx10 x 19/16 x 3/4 x 15/162.2
Cross Tee
10.04.014
10.04.022 - No Slots
Wall Angle
38.90.124
Wall Channel
60.00.010-60.00.011
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planostile Metal Panel
5
Lay-in Accessories
Product
Number
Description
Hold Down Inserts
60.00.012-60.00.013
60.00.014-60.00.015
Hold Down Clip
63.26.200
Wall Spring
63.26.202
Packaging
Feet Pieces
Hold Down Inserts for 19/16 Channel — Steel
60.00.012
11 x 11/2 x 3/4 x 3/4
60.00.014
22 x 11/2 x 3/4 x 3/4
0.2PTO*
0.4PTO*
Hold Down Inserts for 19/16 Channel — Aluminum
60.00.013
11 x 11/2 x 3/4 x 3/4
60.00.015
22 x 11/2 x 3/4 x 3/4
0.1PTO*
0.2PTO*
Product Packaging
Number
Description
Pieces Miscellaneous Accessories
63.26.200
Black - Hold Down Clip
63.26.201
Perimeter Clip
63.26.202
Wall Spring - 5/8 face x 7/8 deep
940.xxx
Touch-Up Paint, 12 oz. spray can
Product
Number
Perimeter Clip
63.26.201
Weight
Per Piece
Panel
Size
Description
Poly-Wrapped Acoustical Pads
58.01.059.008
24 x 241 x 1 lb.
58.01.061.008
24 x 481 x 1 lb.
58.01.064.008
24 x 2411/2 x 1 lb.
58.01.063.008
24 x 4811/2 x 1 lb.
Product
Number
Description
Wire Grid Spacer
60.00.021
2 x 2, Steel
1000
500
1000
–
1
Weight
16
21
17
1
Weight
Per Piece
0.50
1.00
0.75
1.50
Weight
Per Piece
0.50
Poly-Wrapped Acoustical Pads
58.01.059.008-58.01.064.008
Wire Grid Spacer
60.00.0211
* PTO – Packaged To Order
6
Planostile Metal Panel
chicagometallic.com
Snap-in Square and Bevel Edge Panels
Snap-in Square Edge Panels (MA/AMA)
21/2
Product
Number
Panel
Size
Sq. Ft.
Packaging
Pieces
Weight
14
32
Snap-in Square Edge
0.024 Galvanized Steel
Solid
MA463XxxxX
24 x 24
0.032 Aluminum
Solid**
AMA463XxxxX
AMA483XxxxX
24 x 24
24 x 48
56
56
14
31
PTO*PTO*PTO*
Snap-in Bevel Edge Panels (MA461/AMA461)
21/2
Product
Number
Panel
Size
Sq. Ft.
Packaging
Pieces
Weight
Snap-in Bevel Edge
0.024 Galvanized Steel
Solid
MA461XxxxX
24 x 24
56
14
32
0.032 Aluminum
Solid**
AMA461XxxxX
24 x 24
56
14
31
* PTO – Packaged To Order
** MetalWood II finished aluminum panels are constructed from 0.024 base aluminum metal with
0.008 vinyl laminate for a total panel thickness of 0.032
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planostile Metal Panel
7
Snap-in Suspension and Wall Channels
Product
Dimensions
Number
LengthHeightFace
Feet
Concealed Snap-Bar Main Tee
MA010.500CH*
1221/8
Concealed Snap Bar Main Tee
MA010.500CH
Spacer Cross Tee
10.04.022UL.001*
10.01.229UL.001*
10.01.210.001H
10.01.206.001H
211/2
211/2
411/2
511/2
Packaging
PiecesWeight
/16
180
15
74
/16
/16
15
/16
15
/16
200
150
200
250
100
75
50
50
35
28
38
61
80
160
40
15
4029
15
9
15
*Components labeled for U.L. 580 Class 30 system.
Spacer Bar
10.00.826.000
10.00.828.000
Spacer Tee
10.04.022UL.001-10.01.229UL.001
10.01.210.001H - 10.01.206.001H
211
411
ProductDimensions Weight
Number
LengthHeight Face
Per Piece
Wall Channel — Steel
60.00.009.xxx1021/2
Spacer Bar
10.00.826.000H - 10.00.828.000H
Wall Channel — Aluminum*
60.00.008.xxx1021/2
/16 x 15/16
15
/16 x 15/16
15
4
2.5
*Components labeled for U.L. 580 Class 30 system - see drawing on page 11 for additional information.
Wall Channel
60.00.009-60.00.008
8
Planostile Metal Panel
chicagometallic.com
Snap-in Accessories
Product
Dimensions
Number
LengthHeightFace
Weight
Per Piece
Packaging
Feet Pieces
0.5
0.5
PTO*
PTO*
Hold Down Inserts for 21/2 Wall Channel – Steel
60.00.031
1127/163/4 x 3/4
60.00.032
2227/163/4 x 3/4
Hold Down Inserts
60.00.031-60.00.032
60.00.033-60.00.034
Hold Down Inserts for 21/2 Channel – Aluminum
60.00.033
1127/163/4 x 3/40.2
60.00.034*
2227/163/4 x 3/40.2
*Components labeled for U.L. 580 Class 30 system - see drawing on page 11 for additional information.
Product
Number
Length
Description
Feet
Miscellaneous Accessories
923
–
924
–
Panel Retainer Clip
63.26.031
Attachment Clip Brace
63.26.032
Wire Grid Spacer
60.00.021
Access Key Blade Assembly
Access Key Blade*
Packaging
Pieces Weight
PTO*
PTO*
*Access key blade fits into a standard utility knife handle and is used to disengage tiles from the concealed snap bar.
Product
Number
Size
Description
Feet
Packaging
Pieces Accessories for UL 580 Class 30 Snap-in System for Exterior Soffits
63.26.031*
4
Panel Retainer Clip
–
63.26.032*
3 x 3 Bracing to Snap-Bar Carrier Attachment Clip–
63.26.035.xxx
120
Expansion Joint Assembly - painted color –
63.26.033.xxx
24 x 24 Access Door Assembly - painted color –
500
100
PTO*
1
Weight
7
5
6
*Components labeled for U.L. 580 Class 30 system - see drawing on page 11 for additional information.
Expansion Joint Assembly includes two pieces of expansion channel and one piece of expansion angle.
Product
Number
Poly-Wrapped Acoustical Pads
58.01.059.008-58.01.064.008
PTO*
PTO*
Panel
Size
Description
Weight
Per Piece
Poly-Wrapped Acoustical Pads
58.01.059.008
24 x 241 x 1 lb.
58.01.061.008
24 x 481 x 1 lb.
58.01.064.008
24 x 2411/2 x 1 lb.
58.01.063.008
24 x 4811/2 x 1 lb.
0.50
1.00
0.75
1.50
Wire Grid Spacer
60.00.021
0.50
–
Product
Number
2 x 2, Steel
Fixture
Size
Per
Carton
Weight
Per Piece
Trim Kit* – For 24 x 24 Type G Light Fixture - 24 Carrier Spacing
63.26.036.xxx
24 x 24 PTO*2
63.26.036.xxx
24 x 24 PTO*2
63.26.036.xxx
24 x 24 PTO*2
Trim Kit** – For 24 x 48 Type G Light Fixture - 48 Carrier Spacing
63.26.037.xxx
24 x 48 PTO*4
63.26.037.xxx
24 x 48 PTO*4
63.26.037.xxx
24 x 48 PTO*4
Trim Kit* – For 24 x 48 Type G Light Fixture - 24 Carrier Spacing
63.26.038.xxx
20 x 48
63.26.038.xxx
20 x 48
63.26.038.xxx
20 x 48
Trim Kit
63.26.036- 63.26.037-63.26.038
PTO*
PTO*
PTO*
5
5
5
* Kit includes four trim pieces and two variable placement cross tees.
** Kit includes four trim pieces and two spacer bars.
* PTO – Packaged To Order
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planostile Metal Panel
9
Exterior Soffits
Planostile Snap-in System for Exterior Soffits – Class 30 per UL 580
Planostile Snap-In Panel system will resist a 30 PSF wind pressure (positive and negative) when installed as shown and in accordance
with ASTM C636-04. Down braces selected based on the plenum depth and imposed axial load selected by architect or engineer
of record.
Panel Retainer Clip (#63.26.031)
Insert through holes in panels and twist wrap
retainer ends with a minimum (3) tight wraps.
Concealed Snap Bar Main Tee
(#MA010.500CH)
Down Brace (48 maximum
spacing along main tee) must
be fastened to main tee.
Hanger Wire (12 ga min.)
Cross Tee (#4022)
Planostile Snap-In Panel (#AMA 463 or #MA 463)
non-perforated. (If steel panels required, use G60
minimum. Special order, consult CMC).
System Integration
Planostile Lay-in
Lay-in square panel
Wall condition with angle
Wall condition with
channel/hold down insert
Lay-in reveal panel
Infinity™ perimeter trim
Planostile Snap-in
Type G
light fixture
(by others)
Snap-in panel
Wall condition with angle
Wall condition with
channel/hold down insert
Infinity™ perimeter trim
Trim Kit
G fixture trim
10
Planostile Metal Panel
chicagometallic.com
Specification Data
Product information for integration into ceiling specification
panel type
Lay-in Reveal Edge
Lay-in Square Edge
Snap-in
material
painted aluminum
•
•
•
painted galvanized steel
•
•
•
MetalWood® woodgrain finishes***
•
•
•
WoodScenes™ painted finishes
•
•
•
brass, copper, chrome and satin anodized aluminum
•
•
•
stainless steel (solid only)
•
surface
solid and perforated
•
•
•
size2 x 2
squaresquaresquare/bevel
2 x 4, custom
square
square
square
fire
class A: flame 0, smoke 0 per ASTM E 84
•
•
•
sound
NRC - perforated with Acoutex™ backer
0.70
0.70
0.70
NRC - perforated with 1-1/2 acoustical pad
0.90
0.90
0.90
performance
interior and seismic environments
•
•
•
exterior soffits (per UL 580 class 30) (2 x 2)1
•
suspension9/16
•
•
15/16
•
•
1-3/8
•
concealed snap bar
•
classification
type XX, pattern C, G per ASTM E 1264
•
•
•
warranty
1 year limited
•
•
•
sustainability
Aluminum 100% recycled content (60% post-consumer/ 40% post-industrial). Steel panels 75% recycled content (50% post-consumer/50% post-industrial). 100% locally recyclable
•
•
•
1 - Consult with an engineer to evaluate the suitability of the system for the intended application.
Colors and Finishes
Standard Painted Colors
01 White
08 Black
44 Satin Silver
Premium Painted Colors and Finishes
21 Copper Metallic
03 Bronze
88 Flat Black
113 Straw
167 Brick Red
174 Garnet
215 Forest Green
246 Federal Indigo
256 True Blue
263 Plum
270 Pearl Gray
425 Wet Clay
428 Yellow Flash
429 Silver Lining
430 Beige Breeze
432 Blonde Wood
437 Midnight Blue
438 Royal Amethyst
442 Burgundy Brick
443 Toffee Fate
447 Cinnamon
449 Fortune Gray
455 Cocoa Shell
495 Cardinal Red
23 Sandstone
379 Gloss White
386 Gloss Black
401 Maple*
402 Oak*
403 Cherry*
404 Pumpkin Maple*
405 Karri*
Anodized Finishes
431 Whitewash
520 Polar White
521 Nickel
524 Silver
Other painted color
* Coordinating Solid Paint Colors to MetalWood II ® Woodgrain Finishes
MetalWood II ® Woodgrain Finishes***
14 Chromecoat
16 Brasscoat
504 Satin Anodized*
509 Coppercoat
** Panels only
WoodScenes™ Painted Colors
800 Lazy Maple
801 Aged Teak
802 Vintage Burlwood
803 Burnished Cherry
804 Sleek Cherry
805 Weathered Oak
650R Maple
651R Cherry
652R Pumpkin Maple
653R Oak
654R Karri
655R Bamboo
*** MetalWood II finished aluminum panels are constructed from 0.024 base aluminum
metal with 0.008 vinyl laminate for a total panel thickness of 0.032
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planostile Metal Panel
11
Panel Perforation Patterns
Standard Patterns
AA 62R354L
D 98R216L
E 71R138D
Q 562S572L
R 250S750L
V 62R250D
0.062 diameter holes
0.354 lineal centers
3% open area
0.098 diameter holes
0.216 lineal centers
16% open area
0.250 square holes
0.750 lineal centers
11% open area
0.562 square holes
0.672 lineal centers
70% open area
J 250R312S
0.071 diameter holes
0.138 diagonal centers
21% open area
0.250 diameter holes
0.312 staggered centers
58% open area
0.062 diameter holes
0.250 diagonal centers
5% open area
Perforation Code Key
Sample number: 62R250D
62
Hole size in 1/1000
inches (0.062”)
R
R = Round Hole
S = Square Hole
250
Hole spacing in
1/1000 inches
(0.250”)
D
D=Diagonal pattern (45°)
L=Linear pattern (straight)
S=Staggered pattern (60°)
Panel Perforation Borders (24 x 24 Lay-in Panels)
Square Edge for
Pattern Letter
Hole Size
Hole Type
Spacing
Pattern
% Open Area
15/16 Grid
Standard
AA
0.062
Round
Reveal Edge for Reveal Edge for
15/16 Grid
9/16 Snap-in
0.354
Lineal (straight)
3%
none
none
D0.098Round0.216
Lineal (straight)
16%
none
1.001.190.72
E0.071Round0.138
Diagonal (45°)
21%
none
0.971.160.66
J
0.250Round0.312
Staggered (60°)
58%
none
none
none
none
Q
0.562 Square0.672
Lineal (straight)
70%
none
0.35
1.02
1.00
R
0.250
Square
0.750
Lineal (straight)
11%
0.53
0.530.72
0.25
V
0.062
Round
0.250
Diagonal (45°)
5%
none
none
none
none
none
none
Note: Border is measured from edge of hole to edge of grid.
12
Planostile Metal Panel
chicagometallic.com
Panel Perforation Patterns
Premium Patterns
B 60R169L
F 71R195L
G 125R250L
H 125R354L
0.125 diameter holes
0.354 lineal centers
10% open area
I 185R1000D
0.125 diameter holes
0.250 lineal centers
20% open area
K 250R354D
L 250R500L
N 250R750L
0.250 diameter holes
0.750 lineal centers
9% open area
O 375S1125L
0.25 diameter holes
0.50 lineal centers
19% open area
P 375R1125L
W 562R131L
Y 562S1312L
Z 125R500L
0.060 diameter holes
0.120 diagonal centers
10% open area
0.25 diameter holes
0.354 lineal centers
39% open area
0.562 diameter holes
1.312 lineal centers
14% open area
0.071 diameter holes
0.195 lineal centers
10% open area
0.562 square holes
1.312 lineal centers
18% open area
0.375 square holes
1.125 lineal centers
11% open area
AI 250R413S
0.125 diameter holes
0.500 lineal centers
5% open area
0.250 diameter holes
0.413 special staggered centers (41°)
28% open area
0.188 diameter holes
1.00 diagonal centers
3% open area
0.375 diameter holes
1.125 diagonal centers
9% open area
AJ 500R600S
0.500 diameter holes
0.600 staggered centers
63% open area
AK 48R196L
0.048 diameter holes
0.196 lineal centers
4.7% open area
Panel Perforation Borders (24 x 24 Lay-in Panels)
Square Edge for
Pattern Letter
Hole Size
Hole Type
Spacing
Pattern
% Open Area
15/16 Grid
Premium
B
F
G
H
I
K
L
N
O
P
W
Y
Z
AI
AJ
AK
0.060Round0.120
0.071
Round
0.195
0.125
Round
0.250
0.125
Round
0.354
0.188Round1.000
0.250
Round
0.354
0.250
Round
0.50
0.250
Round
0.750
0.375
Square
1.125
0.375
Round
1.125
0.562Round1.312
0.562 Square1.312
0.125
Round
0.500
0.250Round0.413
0.500Round0.600
0.048Round0.196
Lineal (straight)
Lineal (straight)
Lineal (straight)
Diagonal (45°)
Diagonal (45°)
Diagonal (45°)
Lineal (straight)
Lineal (straight)
Lineal (straight)
Lineal (straight)
Lineal (straight)
Lineal (straight)
Lineal (straight)
Staggered (41°)
Staggered
Lineal (straight)
10%
10%
20%
10%
3%
39%
19%
9%
11%
9%
14%
18%
5%
28%
63%
4.7%
Reveal Edge for Reveal Edge for
15/16 Grid
9/16 Snap-in
0.4370.437
0.6250.900
0.710.710.900.40
0.3400.340
0.5811.060
0.3400.340
0.562
0.590
none
0.130.31
0.59
0.280
0.2800.470
0.750
0.400
0.400
0.5900.980
0.53
0.530.72
0.25
0.65
0.660.840.31
0.65
0.660.840.31
0.75
0.750.940.66
0.75
0.750.94
0.56
0.4370.437
0.6500.730
0.7980.7980.9861.267
0.1810.1810.369
0.650
0.4330.4330.6210.902
Note: Border is measured from edge of hole to edge of grid.
USA and Canada: 800.323.7164 / fax: 800.222.3744
Planostile Metal Panel
13
Lay-in Panel Specification
PART 1 - GENERAL
1.01 Scope
Furnish and install the Planostile lay-in metal panel ceiling system as manufactured
and supplied by Chicago Metallic (800)323.7164.
1.02 Related Sections
A. Section 09 22 26 - Suspension Systems
B. Section 09 51 00 - Acoustical Ceilings
C. Section 09 63 00 - Acoustical Ceiling Suspension Assemblies
D. Section 09 29 00 - Gypsum Board
E. Section 09 54 00 - Specialty Ceilings
F. Section 09 58 00 - Integrated Ceiling Assemblies
G. Section 13 48 00 - Sound, Vibration, and Seismic Control
H. Section 22 00 00 - Plumbing
I. Section 23 50 00 - Central Heating Equipment
J. Section 26 50 00 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C 635 - Standard Specification for the manufacture, performance, and testing of
Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.
2. C 636 - Standard Practice for Installation of Metal Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels.
3. E 84 - Test Method for Surface Burning Characteristics of Building Materials.
4. E 580 - Standard Practice for Application of Ceiling Suspension Systems for
Acoustical Tile and Lay-in Panels in Areas Requiring Seismic Restraint.
1.04 Submittals
A. Product data: Manufacturers standard data sheets listing dimensions and details.
B. Samples: Manufacturers standard samples including suspension, panels and
colors.
C. Shop Drawings: Reflected ceiling plan and elevation drawings indicating ceiling
layouts, perimeter conditions and accessories.
1.05 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area to receive suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to suspension system
installation.
3. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions which will exist when area is complete and occupied.
4. Heating and air conditioning systems to be operating prior to, during, and after
installation.
5. Deliver materials in manufacturers original packaging, unopened and undamaged.
6. Store materials in an enclosed dry location at room temperature and protect from
soiling, damage, moisture and humidity.
1.06 Maintenance
Furnish additional material equal to (_____)% of ceiling area.
PART 2 - PRODUCTS
2.01 Manufacturer
Chicago Metallic non-rated Planostile lay-in metal panel ceiling system for installation
into exposed T-bar ceiling suspension.
2.02 Materials
A. Lay-in metal panels:
1. Panels shall measure (24 in. by 24 in.) (24 in. by 48 in.) (custom_________) with
(square) (reveal) lay-in edge detail.
14
2. Manufactured from [(0.024 in. galvanized steel) (0.032 in. aluminum)] [(solid)
(perforated with Chicago Metallic pattern ___ )].
3. Finish: [Painted: (01 White)(44 Satin Silver) (Painted Color__________)(Anodized________) (MetalWood® finish _________ on 0.032 inch aluminum)
(WoodScenes™ Painted Color ______)]. B. Acoustical Material:
1. Poly-encased insulation pads, of (1)),(1-1/2)) thickness and a density of (1)),
(1-1/2)) pcf.
2. Acoutex acoustical non-woven fiber to be inserted in the factory and adhered
with glue to the back of the panel for sound absorption capabilities.
C. Suspension:
1. Chicago Metallic Intermediate duty non-rated double web suspension (1200
system with 15/16 inch exposed face) (4000 system with 9/16 inch exposed
face) (3500 system with 9/16 inch wide by 5/16 inch deep face with 1/4 inch wide
opening) (3600 system with 9/16 inch wide by 5/16 inch deep face with 1/8 inch
wide opening). System consists of main tees and cross tees to create (24 inch
by 24 inch) (24 inch by 48 inch) (custom_________) modules.
2. Suspension exposed face shall be [(coated with factory applied baked-on enamel
paint) (01 White) (44 Satin Silver Metallic) (_____)] [anodized (14 Chromecoat)
(16 Brasscoat) (509 Coppercoat)][painted color coordinated for woodgrain panel
finish].
D. Perimeter Treatment Components:
1. Wall Channels and hold-down inserts: Wall channels are formed from 0.020 inch
(galvanized steel) (aluminum) and manufactured to a C-shape, with a ¾ inch top
leg by 1-9/16 I.D. and 15/16 inch bottom leg. Length is 144. Finished identical to
main tees and cross tees. Hold-Down Inserts are manufactured from the same
material as wall channels and formed in a C-shape with ¾ inch legs with 1 ½
inch I.D. by (11 inch) (22 inch) length. Finish shall be supplied by manufacturer.
2. Wall Angle: (C3209, 1 inch wide x 2 inches high x 120 inches long) (1430, 7/8
inch wide by 7/8 inch high x 144 inches long) finished identical to main tees and
cross tees.
3. Infinity™ Perimeter Trim: Made from extruded aluminum [(2)(4)(6)(8)(10)(12)]
inches deep. Painted on all sides [(to match main tees and cross tees)(Other
painted color _________)]. Panels to be (straight)(curved) as indicated on reflected
ceiling plans.
E. Hanger Wire:
1. Hanger wire: galvanized.
PART 3 - EXECUTION
3.01 Examination
Examine area receiving system to identify conditions which will adversely affect installation. Do not begin installation until adverse conditions have been remedied.
3.02 Installation
A. Metal panels supported by an appropriately installed Chicago Metallic (15/16))
(9/16)) grid system.
B. If required, insulation pads shall be laid upon the back of the panels (3) max. or
1 lb/sq.ft. max.).
C. If necessary, utilize Chicago Metallic hold down clips to keep the insulation pads
in place.
D. Perimeter Treatment:
1. Perimeter treatment: Install channel on vertical surfaces, intersecting suspension components, by appropriate method in accordance with industry accepted
practice.
2. Hold-down inserts install between the top leg of the wall channel and all metal
panels.
3. Additional Hanger Wires at locations where imposed loads could cause deflection
exceeding 1/360 span.
3.03 Repair
A. Remove damaged components, replace with undamaged components. Clean
with non-solvent based non-abrasive commercial cleaning solution.
Planostile Metal Panel
chicagometallic.com
Snap-in Panel Specification
PART 1 - GENERAL
1.01 Scope
Furnish and install the Planostile snap-in metal panel ceiling system as manufactured and supplied
by Chicago Metallic (800)323.7164.
1.02 Related Sections
A. Section 09 20 00 - Plaster and Gypsum Board
B. Section 09 51 00 - Acoustical Ceilings
C. Section 09 63 00 - Acoustical Ceiling Suspension
D. Section 09 54 00 - Specialty Ceilings
E. Section 21 00 00 - Fire Suspension
F. Section 220000 - Plumbing
G. Section 23 00 00 - HVAC
H. Section 26 50 00 - Lighting
1.03 References
A. American Society for Testing and Materials (ASTM)
1. C635 - Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension
Systems for Acoustical Tile and Lay-in Panel Ceilings.
2. C636 - Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile
and Lay-in Panels.
3. E 84 - Test Method for Surface Burning Characteristics of Building Materials.
4. E 580 - Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and
Lay-in Panels in Areas Requiring Seismic Restraint.
B. International Building Code (IBC)
1. Section 1621
C. Uniform Building Code
1. 25-2 Standard
1.04 Submittals
A. Product data: Manufacturers standard data sheets listing dimensions and details.
B. Samples: Manufacturers standard samples including suspension, panels and colors.
C. Shop Drawings: Reflected plan and elevations indicating ceiling layouts, perimeters and
accessories.
1.05 Quality Assurance
A. Materials flame and smoke tested per ASTM E 84 and comply with ASTM E 1264 Class A.
B. Exterior soffit system classified per UL Construction #630 tested per UL 580 Class 30 pressures
in both inward (uplift) and outward (negative) directions.
1.06 Project Conditions
A. Environmental Requirements:
1. Verify weather tightness of area to receive suspension system prior to installation.
2. Wet trades work to be thoroughly dry and complete prior to suspension system installation.
3. Installation to begin only when temperature and humidity conditions approximate interior conditions
which will exist when area is complete and occupied.
4. Deliver materials in manufacturers original packaging, unopened and undamaged.
5. Store materials in an enclosed dry location at room temperature and protect from damage.
1.07 Maintenance
Furnish additional material equal to (_____) % of ceiling area.
PART 2 - PRODUCTS
2.01 Manufacturer
Chicago Metallic non-rated Planostile (interior)(exterior) snap-in metal panel ceiling system.
2.02 Materials
A. Suspension system:
1. Main Tee MA 010.500CH: Snap-bar formed into T-shape to receive the vertical flanges of Planostile
panels with tight panel interlock, alignment and adjacent panels level at the ceiling plane. Formed
from 0.020 in. HDG steel.
2.Spacer Tee (2 ft and4 ft): Manufactured from 0.012 in. galvanized steel formed into T-shape (24)
(48) (60) (___) in. long.
3.Panel Retention Clip 63.26.031 for UL 580 Class 30 exterior soffits: Formed from 16 ga. galvanized
steel wire into angled V shape to interlock four panel corners to Main Tee.
4. Brace Clip 63.26.032 for UL 580 Class 30 exterior soffits: Manufactured from .040 in. galvanized
steel for fastener attachment to suspension and bracing.
5. Structural bracing to meet requirements of UL 580 Class 30 classification and specified project
design requirements.
B. Metal Panels:
1. Planostile Snap-In Metal Panels for interior applications
a. Panels shall measure (24 in. x 24 in.), (24 in. x 48 in.), (custom _______) with 90° upturned legs on
all four sides. Panels shall be formed with (square)(bevel) edges.
b. Panels formed from [(.024 in. galvanized steel)(.032 in. aluminum)] [(perforation pattern ___ )
(unperforated)].
c. Finish: [Painted: (01 White)(44 Satin Silver) (Painted Color__________)(Anodized________)
(MetalWood® finish _________ on 0.032 inch aluminum) (WoodScenes™ Painted Color ______)].
USA and Canada: 800.323.7164 / fax: 800.222.3744
2. Planostile Snap-In Metal Panels for exterior soffits:
a. Panels shall measure 24 in. x 24 in. with 90° upturned
legs on all four sides. Panels shall be formed with (square)(bevel) edges.
b. Panels formed from 0.032 in. aluminum, unperforated.
c.Finish to be [painted with a baked enamel finish (01 White) (44 Satin Silver Metallic) (_____)].
3. Acoustical material for interior applications:
a. Glass fiber insulation pads encased in black poly [(1),(1-1/2)] in. thick and density of [(1) (1-1/2)]
pcf.
b. Acoutex acoustical non-woven fiber adhered with glue to the back of the panel. Soundtex color is
black.
C. Perimeter Treatment:
1. Interior Wall Channel and Hold-Down Insert: Channel made from .020 in. galvanized steel in
C-shape, with a 3/4 in. top leg, 2-1/2 in. I.D., and a 15/16 in. bottom leg. Length 144 in. Hold-Down
Insert formed from same material as wall channel in a C-shape, with 3/4 in. legs, 2-7/16 in. I.D.,
(11)(22) in. long.
2. Infinity™ Perimeter Trim: Made from extruded aluminum [(4)(6)(8)(10)(12)] inches deep. Painted
on all sides [(to match main tees and cross tees)(Other painted color _________)]. Panels to be
(straight)(curved) as indicated on reflected ceiling plans.
3. Exterior Wall Channel and Hold-Down Insert: Channel made from .032 in. aluminum in C-shape,
with 3/4 in. top leg, 2-1/2 in. I.D., and 2 in. bottom leg. Hold-Down Insert is formed from same
material as wall channel in C-shape, with 3/4 in. legs, 2-7/16 in. I.D., 22 in. long.
D. Accessories
1. Interior panel access key provided to permit detachment of panels from the carrier.
2. Exterior panel access door assembly in same size and finish as panels. Four exposed fasteners
lock to the suspension support angles.
3. Expansion Joints: Formed from 0.032 in. aluminum into a C-shape, with 1-3/4 in. top leg, 2-1/2 in.
I.D., and 2 in. bottom leg. Top angle to be formed from same material with ½ in. vertical and 4 in.
horizontal leg.
4. Interior Trim Kit for (24 in. x 24 in.)(24 in. x 48 in.) Type G fluorescent light fixture including two
variable placement 01 White cross tees and trim (01 White)(to match Planostile panels)(other color
_____).
5. Bracing bracket at connection between structural bracing and Planostile suspension.
6. Hanger Wire: galvanized.
PART 3 - EXECUTION
3.01 Examination
A. Examine area receiving system to identify conditions which will adversely affect installation. Do
not begin installation until adverse conditions have been remedied.
B. Verify completion of work above ceiling plane prior to panel installation.
3.02 Installation
A. General:
1. For interior applications in non seismic areas install in accordance with ASTM C636 (see 1.03, A
2.).
2. For interior applications in seismic areas install in accordance with (IBC Section 1621)(ASTM E
580).
3. For exterior soffit applications install in accordance with ASTM C636 (see 1.03, A 2.)
B. Suspension:
1. Planostile Snap-Bar Main Tees: Install (24)(48) in. O.C., by direct suspension from existing structure,
with not less than 12 gage steel hanger wires spaced (48) in. O.C. along main tee length. Wrap
hanger wires tightly 3 full turns at each end. (Brace against wind uplift as necessary to meet UL
580 Class 30).
2.Cross Tees: Install perpendicular to main tees 48 in. O.C.
C. Metal Panels:
1. Planostile Snap-in Metal Panels: Install Metal Panel into Main Tee carrier ensuring embosses on
vertical legs are fully engaged into Main Tee and panel edges are aligned.
2. If required, insulation pads shall be laid upon the back of the panels (3) max. or 1 lb/sq.ft. max.).
3. For Seismic and Exterior Soffit applications install wire retention clips through holes in panel
vertical flanges, connecting four panel corners together and secure by tying wire clips across top
of Snap-Bar Main Tee.
D. Perimeter Treatment:
1. Perimeter treatment: Install channel on vertical surfaces, intersecting suspension components, by
appropriate method in accordance with industry accepted practice.
2. Hold-down inserts install between the top leg of the wall channel and all metal panels.
3. Additional Hanger Wires at locations where imposed loads could cause deflection exceeding 1/360
span.
E. Air Diffusers: coordinate with Mechanical (HVAC) Division.
3.03 Repair
A. Remove damaged components, replace with undamaged components. Clean with non-solvent
based non-abrasive commercial cleaning solution.
Planostile Metal Panel
15
CHICAGO METALLIC
Elevate Your Ceilings
Accelerate Your Projects
®
Celebrate Your Success
4 8 4 9 S O U T H A U S T I N AV E . , C H I C A G O , I L 6 0 6 3 8
708.563.4600
USA & CANADA 800.323.7164
C H I C A G O M E TA L L I C . C O M
© 2013 Chicago Metallic Corporation. All rights reserved. SNL0091B1813
16
Planostile Metal Panel
chicagometallic.com
metal panel
09 54 33
Traditions™
product guide
Fast. Easy. Customer Focused.®
Traditions™ Embossed Metal Panels
Colors
Features and Benefits:
Standard Painted Colors
Range of patterns to suit varied designs.
l 01White
l 08Black
l 44 Satin Silver
Bare chromium treated steel (suitable for painting) for superior
aesthetics and corrosion resistance.
2 x 2 or 2 x 4 Lay-in panels designed for use with standard 15/16 T-bar grid allow for full plenum accessibility.
2 x 4 Nail-up panels are available for ceiling and/or
wall applications. Nail-up panels are installed onto
furring strips.
Perimeter angles, cornices, and accessories are available
for a complete, authentic installation.
Ideal for applications such as restaurants, night clubs,
hotels, casinos, lobby areas, retail stores, and private residences.
Flat Lay-In Panel
(2 x 2 or 2 x 4)
use with standard 15/16 T-bar grid
for full plenum accessibility
(hold down clips or gypsum lay-in panel required)
Furring Strips - 12 OC
Full Ceiling
Panel
1/2
Nail
Partial Ceiling Panel
Cone Head Nails
(required)
Cornice
Molding
Cone Head Nail
(optional)
Drywall
Nail-up Panel/Cornice
(2 x 4)
nails directly to furring strips positioned 12 O.C. (2 x 2)
2
Premium Painted Colors and Finishes
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
03Bronze
21 Copper Metallic
23Sandstone
88 Flat Black
113Straw
167 Brick Red
174Garnet
215 Forest Green
246 Federal Indigo
256 True Blue
263Plum
270 Pearl Gray
379 Gloss White
425 Wet Clay
428 Yellow Flash
429 Silver Lining
430 Beige Breeze
431Whitewash
432 Blonde Wood
437 Midnight Blue
438 Royal Amethyst
442 Burgundy Brick
443 Toffee Fate
447Cinnamon
449 Fortune Gray
455 Cocoa Shell
495 Cardinal Red
510 Morning Dew Metallic
511 Autumn Metallic
512 Moon Glow Metallic
513 Sun Gold Metallic
514 Harvest Metallic
515 Sterling Metallic
516 Flint Metallic
517 Emerald Metallic
520 Polar White
521Nickel
PRODUCT
chicagometallic.com
UPDATES
Always up-to-date product information
is available on the web
chicagometallic.com/traditions
Panel Patterns
0 12 34
5 67 89
10
000 Standard Filler Panel
Available in 2x 4 only.
21
23
26
37 (1x 2)
36
38 (1x 1)
Standard nail-up installation procedures are not applicable to pattern 36. This panel
requires special installation techniques using 1 x 2 furring strips for attachment.
Proper installation instructions are available in the CMC Tech Data literature series
or by contacting Customer Service. These patterns are available in Bare (000) only.
3
Product Number Key
63.22.011.001
Finish
000
xx
xxx
Bare (suitable for painting)
(01/44) White / Satin Silver
Premium Colors and Finishes
Pattern Number
Product
222 x 2 Lay-in Panel
242 x 4 Lay-in Panel
252 x 4 Nail-up Panel
262 x 4 Filler Panel
40Cornice
63Traditions
Product Number Pattern
Finish
Weight Per Piece
63.22.xxx.000
0-10, 21, 23, 26 & 36
Bare (000)
2
63.22.xxx.xxx
0-10, 21, 23, 26 & 36
Standard painted colors 2
63.22.xxx.xxx
0-10, 21, 23, 26 & 36
Premium colors and finishes
2
63.24.xxx.000
0-8, 10, 21, 23, 26 & 36
Bare (000)
4
63.24.xxx.xxx
0-8, 10, 21, 23, 26 & 36
Standard painted colors 4
63.24.xxx.xxx
0-8, 10, 21, 23, 26 & 36
Premium colors and finishes
4
63.23.036.000
36
Steel – Bare
2
63.23.036.xxx
36
Steel – Standard Colors 4
63.23.036.xxx
36
Steel – Premium Colors
4
63.25.xxx.000
1, 3
Steel – Bare
2
63.25.xxx.000
0, 2, 4, 21, 23, 26, 36
Steel – Bare 2
63.25.xxx.xxx
0-4, 21, 23, 26, 36
Steel – Standard Colors
4
63.25.xxx.xxx
0-4, 21, 23, 26, 36
Steel – Premium Colors
4
Panels
2 x 2 LAY-IN
2 x 4 LAY-IN
2 x 2 Nail-up
2 x 4 Nail-up
4
Cornices
Cornices need to be field bent to achieves the projections shown below.
­— recommended for nail-up panel ceiling installations only —
63.40.020 (2 Projection) > Convex Face
63.40.030 (3 Projection) > Straight Face
3
63.40.035 (31/2 Projection) > Convex Face
63.40.063 (61/4 Projection) > Concave Face
61/4
63.40.040 (4 Projection) > Concave Face
63.40.060 (6 Projection) > Concave Face
63.40.050 (4 Projection) > Concave Face
6
63.40.015 Girder Nosing Pattern
6
63.40.075
5
ProductNominal Dimensions
Number
Length
Height
Projection
Weight
Finish
Cornices
63.40.020.000
63.40.020.xxx
63.40.020.xxx
422
422
422
.75
.75
.75
Bare (000)
Standard painted colors
Premium colors and finishes
63.40.035.000
63.40.035.xxx
63.40.035.xxx
431/231/2
431/231/2
431/231/2
.75
.75
.75
Bare (000)
Standard painted colors
Premium colors and finishes
63.40.040.000
63.40.040.xxx
63.40.040.xxx
444
444
444
1
1
1
Bare (000)
Standard painted colors
Premium colors and finishes
63.40.050.000
63.40.050.xxx
63.40.050.xxx
444
444
444
1
1
1
Bare (000)
Standard painted colors
Premium colors and finishes
63.40.075.000
63.40.075.xxx
63.40.075.xxx
466
466
466
1
1
1
Bare (000)
Standard painted colors
Premium colors and finishes
63.40.060.000
63.40.060.xxx
63.40.060.xxx
466
466
466
1.50
1.50
1.50
Bare (000)
Standard painted colors
Premium colors and finishes
63.40.063.000
63.40.063.xxx
63.40.063.xxx
461/461/4
461/461/4
461/461/4
1.75
1.75
1.75
Bare (000)
Standard painted colors
Premium colors and finishes
Perimeter Treatment
FILLER PANELS – 2 x 4 Nail-up For Perimeter Use
63.26.xx.000
2 x 4
63.26.xx.xxx
2 x 4
Steel-Bare (000)
Steel-Painted White
Accessories
hold down clip
935.00
Hold Down Clip
935.00
6
–
1000
16
Steel
Specification Guidelines
09 54 33 - Decorative Panel Ceilings
PART 1 - GENERAL
1.01 Section Includes
A.Provide Stamped Ceiling and Wall Panel
System.
1.02 Related Sections
A.Section 09120 Ceiling Suspension
Systems
B.Section 09130 Acoustical Suspension
Systems
C.Section 09545 Special Ceiling Surfaces
D.Section 13020 Integrated Assemblies
E.Section 13080 Sound, Vibration, and
Seismic Control
F. Section 15550 Heating, Ventilating, and Air
Conditioning
G.Section 16500 Lighting
1.03 References
A.American Society for Testing and Materials
1.C-423 - Test Method for Sound Absorption and Sound Absorption Coefficients
by the Reverberation Room Method.
2.C-635 - Standard Specification for the
Manufacture, Performance, and Testing
of Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceilings.
3.C-636 - Standard Recommended
Practice for Installation of Metal Ceiling
Suspension Systems for Acoustical Tile
and Lay-In Panels.
4.E-84 - Test Method for Surface Burning
Characteristics of Building Materials.
5.E-580 - Practice for Application of Ceiling
Suspension Systems for Acoustical Tile
and Lay-In Panels in Areas Requiring
Seismic Restraint.
6.E-795 - Practices for Mounting Test
Specimens During Sound Absorption
Tests.
1.04 Submittals
A.Product/Technical Literature
1. Submit descriptive literature along with
installation recommendations.
B. Samples
1. Submit sample kit containing appropriate Metal Ceiling and Wall Panel System
samples.
C.Shop Drawings
1. Submit shop drawings illustrating appropriate placement of panels.
D.Certification
1. Furnish certification of materials and
system conforming to specification
requirements.
2. Provide written warranty against defective workmanship and materials for a
period of __ year(s) (up to 20 yrs. maximum) from filing notice of completion.
Part 2 - Products
2.01 Manufacturer
A.Traditions Embossed Metal Panels as
manufactured by Chicago Metallic, 4849
South Austin Avenue, Chicago, Illinois
60638. 1-800-323-7164.
2.02 Components
A.Stamped Panels:
1. Traditions pattern (­­­_________).
2.Manufactured from (0.010 inch thick tinfree steel). Nominal (2 x 2)(2 x 4).
3.Finish: [Bare 000 with chromium treatment for field painting][baked-on polyester enamel paint (white 001)(____)]
B. Suspension System Components
1.Main Runners:
a.Manufactured from 0.015 inch thick
steel 15/16 inch wide by 1-1/2 inches
high by 144 inches long, with factory
punched cross tee slots, hanger holes
and integral bayonet-style couplings.
b.Capped and coated with [baked-on
polyester enamel paint(white 001)
2.Cross Tees:
a. Manufactured from 0.015 inch thick
steel 15/16 inch wide by 1-1/2 inches
high by (24)(48) inches long with factory punched cross tee slots,hanger
holes, and staked-on stab-in end
couplings.
b.Capped and coated identical to main
runners.
C. Perimeter Treatments
1.Wall Angle:
a.Manufactured from (0.020 inch thick
steel)(0.024 inch thick aluminum) 3/4
inches wide by 15/16 inches high
by 144 inches long with both edges
hemmed.
b.Capped and coated identical to main
runners.
2.Cornices:
a.Traditions cornice pattern [__].
b.Manufactured from (0.010 inch thick
steel) with (2)(2-1/2)(3-1/2)(4)(5)(7-1/2)
inch projection by 48 inches long.
c.Coated identical to stamped panels.
C. Accessories
1.Conehead nails: Manufactured with
[(bare000)(white001)] finish.
Part 3 - Execution
3.01 Installation
A.Examine area receiving Stamped Ceiling
and Wall Panel System to identify conditions which will adversely affect installation. Do not begin installation until adverse
conditions have been remedied.
B.Verify completion of work above ceiling
plane prior to installation.
3.02 Installation
A.Lay-In Panels:
1.Supported by an appropriately installed
Chicago Metallic ceiling grid system.
2.Install backing material, e.g., acoustical
board, gypsum board, insulation pads,
etc., on the plenum side of the panels.
3.Attach two hold down clips along each
side of the panel.
B.Nail-Up Panels: Supported by an appropriately installed furring system per detailed
instructions provided by Chicago Metallic.
C.Cornices: Installed in accordance with
detailed instructions provided by Chicago
Metallic.
3.03 Repair
A.Remove damaged components, replace
with undamaged components. Clean with
mineral spirits per detailed instructions
provided by Chicago Metallic.
1.05 Project Conditions
A.Environmental Requirements
1. Verify weather tightness of area to receive system prior to installation.
2. Installation to begin only when temperature and humidity conditions closely
approximate interior conditions that will
exist when area is complete and occupied.
B.Trade Requirements
1. Heating or cooling systems to be operating prior to, during, and after installation.
2. Wet trades work shall be dry and complete prior to installation.
1.06 Maintenance
A.Replacement Material
1. Furnish additional material equal to _­ _%
of the ceiling system area.
7
Ceiling Systems and Specialty Products - USA and Canada: 800-323-7164 / Fax: 800-222-3744 / www.chicagometallic.com
belgium / denmark / the netherlands / uk / germany / france / hong kong / china / malaysia / united arab emirates / mexico
Chicago Metallic and its logo are Registered Trademarks of Chicago Metallic Corporation. Traditions is a trademark of Chicago Metallic Corporation.
© 2012 Chicago Metallic Corporation All Rights Reserved Printed in USA SNL0095F2012
Literature Disclaimer: Presentations in this brochure or any other Chicago Metallic Corporation publication are correct to the best of our knowledge at time of preparation. We provide this information in an advisory capacity only. Any advisory recommendations given in our publications must
be modified to conform with local codes, conditions and specifications. We reserve all rights to amend any information published in our literature without additional notice. Chicago Metallic can not be held responsible or liable for the selection nor application of our products.
