Product Qualification Operations Bulletin
No. 7 • February 2015
Using the ‘SCP03 common’ Package of the CIC
configuration during a UICC v1.0 product qualification
1.1
About this bulletin
The Product Qualification Operations Bulletin aims to present the GlobalPlatform Product
Qualification Process changes and updates.
When an effective date is mentioned for a change, the change must be implemented as of that
date; Changes for which no effective date is specified in the article are effective immediately.
1.2
1.3
Summary
Article
Summary:
This article defines the possibility to run the ‘SCP03 common’ package
of the GP Common Implementation Configuration Test Suite when a
product is submitted for UICC v1.0 Configuration qualification
Type:
Operation Requirement Update
Effective Date:
Applicable April 1st, 2015
Applicability:
UICC v1.0 configuration products
Package to be run
As of April 1st 2015, it will be possible to run the ‘SCP03 common’ package of the Common
Implementation configuration Test Suite v1.6.0 when a UICC Configuration v1.0 product is
submitted for GP qualification.
1.4
Impact on the SCO
A new option is available in section A.2.1.4 of the card SCO; it allows Product vendors to
request that the ‘SCP03 common’ package be run when their GP product is submitted for UICC
v1.0 Configuration qualification.
Note: The SCP03 Common package option can only be selected when the card is submitted for
UICC configuration qualification, it cannot be selected alone.
® GlobalPlatform 2015
Page 1 of 2
Email: gpcompliance@globalplatform.org
GlobalPlatform submitted Configuration Description
A.2.1 – The GP product submitted follows UICC
Configuration, version 1.0.1
X
A.2.1.1 – The UICC Configuration is submitted with the
Contactless extension, version 1.0
A.2.1.2 – The UICC Configuration is submitted with the
Memory Management extension, version 1.0
A.2.1.3 – The UICC Configuration is submitted with the
SCP81 extension, Amendment B, version 1.1.1
A.2.1.4 – The UICC Configuration is submitted with the
‘SCP03 common’ package of the Common
Implementation Configuration v1.6 (*)
(*) Available from April 1st, 2015
1.5
X
Impact on the UICC Test Suite
The UICC test suite has been updated and its Initial State v1.5 has been published.
(Specification of initial states for the compliance test suite for UICC Configuration v1.0.1).
1.6
Process of running SCP03 Common Package
The process of running the ‘SCP03 common’ package when a UICC Configuration v1.0 product
is submitted for GP qualification is the following:
The Product vendor
-
Selects the SCP03 Common package option in section A.2.1.4 of the SCO,
-
Indicates in the XML file that the card supports this option,
-
Generates sample cards containing SCP03 data (*).
The Laboratory
-
Runs the UICC Test Suite (All SCP02 tests and the SCP03 keys handling tests),
-
Runs the SCP03 Common package using the XML options of the card to be tested.
(*) The card shall be prepared accordingly to the Specification of initial states for the compliance
test suite for UICC Configuration v1.0.1.
1.7
For more information please contact the Compliance Secretariat:
gpcompliance@globalplatform.org
® GlobalPlatform 2015
Page 2 of 2
Email: gpcompliance@globalplatform.org