HIGH ABUSE SERIES - New Star Lighting

advertisement
20-30-40
HIGH ABUSE SERIES
SURFACE LUMINAIRE
FLUORESCENT / INCANDESCENT
PROJECT
Made in America
TYPE:
PRODUCT
APPROVED
20
30
40
DIMENSIONAL DATA
FEATURES
5.00”
4.50”
DATE:
The New Star “NS20-NS30-NS40” High Abuse fixture is an economical solution for areas prone to
vandalism
• Enclosed, shatter proof injection molded
polycarbonate diffuser secure to heavy
gauge steel backplate with stainless tamper
proof screws
• Gasketing included
• Wet location listed
5.00”
APPLICATION
6.00”
•
•
•
•
12.00”
8.50”
8.50”
12.00”
8.50”
Apartment Buildings
School Campuses
Public Housing Complexes
Transportation Terminals
•
•
•
•
8.50”
6.25”
3.50”
12.00”
8.25”
6.25” 8.50”
6.25” 8.50”
8.25” 12.00”
(2) KEY HOLES
7/16” DIA.
THRU HOLES
(4) 3/8” DIA.
THRU HOLES
7/16” DIA.
THRU HOLES
(4) 3/8” DIA.
THRU HOLES
(2) KEY HOLES
7/16” DIA.
THRU HOLES
(4) 3/8” DIA.
THRU HOLES
ORDERING INFORMATION
Product Family
NS_
-
NS20
8-1/2” x 6” x 4-1/2”
NS30
8-1/2” x 8-1/2” x 5“
NS40
12” x 12” x 5”
-
# of Fasteners
2 = 2 Tamper proof
screws
4 = 4 Tamper proof
screws
Options
CB = 16 ga. steel conduit box
(white finish)
SW = On/ Off push switch
(for use with CB only)
CW = Cold Weather Ballast
(-30°C)
-
# of Lamps
1 = 1 Lamp
2 = 2 Lamp
3.50”
HOUSING:
NS20
Fluorescent:
1 Lamp
7TW = 7W Twin G-23 •
Military Barracks
Hospitals
Public Washrooms
Park Field Houses
LENS / DIFFUSER:
Injection molded .125” thick (nominal) clear
prismatic polycarbonate.
GASKET:
One piece die cut .125” thick non-shrinking
EPDM neoprene rubber.
FASTENERS:
Stainless Steel Tamper resistant Torx head
screws with center pin reject
LABEL:
REFLECTOR:
White finished cold rolled steel, unitized with
lamp holder and ballast.
WET
ELECTRONICS:
Electronic Ballast <10% THD standard.
Lamps by others.
Lamp Type
-
•
•
•
•
SPECIFICATION FEATURES
Constructed of 14 gauge cold rolled steel and
finished in high reflectance white oven baked
polyester powdercoat.
6.00”
3.75”
Utility Corridors
Hotels
Locker Rooms
Detention Centers
NS30
Fluorescent:
1 Lamp
32 = 32W Triple Gx24q-3
42 = 42W Triple Gx24q-4
2 Lamp
9TW = 9W Twin G-23
13TW = 13W Twin Gx23
13 = 13W Triple Gx24q-1
13Q = 13W Quad G24q-1
18 = 18W Triple Gx24q-2
18Q = 18W Quad G24q-2
26 = 26W Triple Gx24q-3
26Q = 26W Quad G24q-3
Incandescent:
100 = 100W A-19 E26 Med
NS40
Fluorescent:
1 Lamp
32
= 32W Triple Gx24q-3
42
= 42W Triple Gx24q-4
2 Lamp
13TW = 13W Twin Gx23
13
= 13W Triple Gx24q-1
13Q = 13W Quad G24q-1
18
= 18W Triple Gx24q-2
18Q = 18W Quad G24q-2
26
= 26W Triple Gx24q-3
26Q = 26W Quad G24q-3
Incandescent:
100 = 100W A-19 E26 Med
Voltage
12 = 120V
27 = 277V
34 = 347V ■
UN = Universal
(120V-277V)
■ Consult factory for lamp-ballast options
• 1 lamp only
Notes:
Specifications and Dimensions are subject to change without notice. For additional options and dimensional details please consult your New Star Lighting
Representative. For specific electronic ballast, specify brand and catalog number. The New Star Promise will repair or replace any High Abuse fixture when
installed according to New Star’s instructions for the life of the original installation if the fixture should fail due to physical abuse.
New Star - 4000 S. Bell St. - Chicago, IL 60609 - TEL (773) 847-1400 - FAX (773) 254-6811 - V013
87.
Download