metal
leaflet
Lay-In
LAY-IN Board
02
LAY-IN microlook
07
LAY-IN tegular
14
LAY-IN axal vector
23
R-L 201 SYSTEM
30
Metal
product
LAY-IN Board
Square & rectangular tiles
3 ::::
LAY-IN board
SQUARE & RECTANGULAR TILES
BENEFITS
n Diversity of design and application
n Easily assembled and fully demountable
n Cost effective ceiling solution
n Tiles are easily lifted out by hand, allowing full and easy
access to the ceiling void.
APPLICATION AREA
n Used in a variety of ceiling areas: from small service
rooms to large commercial office buildings and major
transportation terminals.
Specification
System Armstrong ceiling system Board,
Lay-In solution with visible grid 24 mm
Perimeter solution Range of standards trims in steel and
aluminium plus custom bulkheads available
Tile material
galvanised steel sheet 0.5 mm
(aluminium or other materials on request)
Service integration standard round or rectangular cut-outs
plus customised options on request.
Execution* square tile square edged with standard
notching
Standard modules 600 x 600 mm
625 x 625 mm
1200 x 600 mm
Grid system tested modular system Prelude TLX 24
further suspension methods on request
Coating RAL 9010 pure white post-coated
powder painted visible surface, other RAL or NCS colours on request
Gap solution 0 mm gap, without gasket
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on
request.
* For further information about the edge detail execution of metal tiles, please see
the Metal Edge Detail Execution datasheet
standard perforation patterns
Ultra Microperforation
Rg 0501
Hole diameter: 0.5 mm
Free area: 0.64 %
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Free area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
:::: 4
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance of sound absorption. All perforated products can
be supplied with a variety of factory fitted acoustic infill options.
Please contact us for more information.
Standard colours
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
Thermal Conductivity
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
RAL 9010
Global White
RAL 9006
RAL 9007
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Sustainability
Armstrong is a certified EN ISO 9001:2008 Quality Assured
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specificaitons or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Environmental
Our metal panels have an average of up to 30% recycling
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
Acoustics
Safe & Healthy
%
ISO 14021
Recycled
content
(%)
Light
reflectance
(%)
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Fire reaction
Humidity
Resistance
(%) up to
Cleanability
up to
Bioguard
paint option
Scratch
resistance
Ultra Microperforation Rg 0501 (1)
up to 30
83
0.45(L)
D
0.55
18
8
A1
95
scrubbable
✔
✔
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
✔
✔
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standardperforated Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
0.10
44
19
A1
95
scrubbable
Premium B15
up to 30
depends on
perforation
0.65
C
0.60
47
21
A2-s1, d0
95
wipeable
moist cloth
✔
Premium OP19
up to 30
depends on
perforation
1.00
A
0.90
31
15
A2-s2, d0
95
wipeable
moist cloth
✔
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
5 ::::
Cross-section BOARD
Quick hanger
Ceiling Void
Cross Tee
Board square/
rectangular tile
Main Runner
Cross Tee
Visible side
Perimeter trim
max. M
Longitudinal-section BOARD
Quick hanger
Ceiling Void
Board square/
rectangular tile
Perimeter trim
M = module size / A = panel length / B = panel width
Cross Tee
Main Runner
Visible side
:::: 6
Detail A Board square tile
Detail B Prelude 24 TLX grid option
Detail C Prelude 15 TL grid option
Prelude 24
Main Runner
Prelude 15
Main Runner
Prelude 15 TL
Cross Tee
Prelude 24 TLX
Cross Tee
For further information about the edge detail
execution of metal tiles, please see the Metal
Edge Detail Execution datasheet
Detail D
suspension methods
Suspension
wire
Suspension
angle
Suspension
hanger for T-bar
Quick
hanger
Bent T-bar hanger
with threaded rod
Nonius hanger
Metal
product
LAY-IN MicroLook
Square & rectangular tiles
BENEFITS
n Diversity of design and application
n Easily assembled and fully
demountable
n Cost effective ceiling solution
n Tiles
are easily lifted out by hand,
allowing full and easy access to the
ceiling void.
APPLICATION AREA
n Used in a variety of ceiling areas:
from small service rooms to large
commercial office buildings and major
transportation terminals.
Project: Barnet College (UK) :::::::: Architect: Perkins Ogden Architects
SOLUTION: Lay-In MicroLook with Microperforation
:::: 9
LAY-IN microlook
SQUARE & RECTANGULAR TILES
Specification
System Armstrong ceiling system MicroLook 8 & 16
Lay-In solution with visible grid 15 mm
Panels Material galvanised steel sheet 0.5 mm
(0.6 mm for module 750 x 750 mm)
(aluminium or further materials on request)
Execution* square tile square edged with 8 mm
or 16 mm drop and standard notching
Standard modules MicroLook 8: 500 x 500 mm
675 x 675 mm
300 x 1200 mm
600 x 600 mm
750 x 750 mm
600 x 1200 mm
MicroLook 16:
500 x 500 mm
675 x 675 mm
600 x 600 mm
750 x 750 mm
Grid system tested modular system Prelude TL 15 /
XL2 15, 15. Optional design grid Silhouette or
Interlude.
Further suspension methods on request
Coating RAL 9010 pure white post-coated
powder painted visible surface, other RAL or NCS colours on request
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on
request.
Perimeter solution Range of standards trims in steel and
aluminium plus custom bulkheads available
Service integration standard round or rectangular cut-outs
plus customized options on request.
MicroLook 8
* For further information about the edge detail execution of metal tiles, please see
the Metal Edge Detail Execution datasheet
MicroLook 16
standard perforation patterns
Ultra Microperforation
Rg 0501
Hole diameter: 0.5 mm
Free area: 0.64 %
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Free area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
10 ::::
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance of sound absorption. All perforated products can
be supplied with a variety of factory fitted acoustic infill options.
Please contact us for more information.
Standard colours
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
Thermal Conductivity
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
RAL 9010
Global White
RAL 9006
RAL 9007
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Sustainability
Armstrong is a certified EN ISO 9001:2008 Quality Assumed
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specificaitons or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Environmental
Our metal panels have an average of up to 30% recycling
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
Acoustics
Safe & Healthy
%
ISO 14021
Recycled
content
(%)
Light
reflectance
(%)
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Fire reaction
Humidity
Resistance
(%) up to
Cleanability
up to
Bioguard
paint option
Scratch
resistance
Ultra Microperforation Rg 0501 (1)
up to 30
83
0.45(L)
D
0.55
18
8
A1
95
scrubbable
✔
✔
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
✔
✔
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standardperforated Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
0.10
44
19
A1
95
scrubbable
Premium B15
up to 30
depends on
perforation
0.65
C
0.60
47
21
A2-s1, d0
95
wipeable
moist cloth
✔
Premium OP19
up to 30
depends on
perforation
1.00
A
0.90
31
15
A2-s2, d0
95
wipeable
moist cloth
✔
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
:::: 11
Cross-section MICROLOOK 8
Quick hanger
ceiling void
MicroLook 8 square/
rectangular tile
Main Runner
Cross Tee
Cross Tee
Visible side
Perimeter trim
Longitudinal-section MICROLOOK 8
Quick hanger
ceiling void
MicroLook 8 square/
rectangular tile
Perimeter trim
M = module size / A = panel length / B = panel width
Cross Tee
Main Runner
Visible side
12 ::::
Cross-section MICROLOOK 16
Quick hanger
Ceiling void
MicroLook 16
Square tile
Main Runner
Cross Tee
Cross Tee
Visible side
Perimeter trim
Longitudinal-section MICROLOOK 16
Quick hanger
Ceiling void
MicroLook 16
Square tile
Perimeter trim
M = module size / A = panel length / B = panel width
Cross Tee
Main Runner
Visible side
:::: 13
Detail A MicroLook 8 square tile option
Detail B MicroLook 16 square tile
Detail C grid system
Detail D grid system
Detail E Design grid Silhouette 15 XL²
Prelude 15
Main Runner
Prelude 15
Main Runner
With 3 mm reveal
With 6 mm reveal
Detail F Design grid Interlude 15 XL²
Prelude 15 XL²
Cross Tee
Prelude 15 TL
Cross Tee
For further information about the edge detail
execution of metal tiles, please see the Metal
Edge Detail Execution datasheet
Detail G suspension methods
Suspension
wire
Suspension
angle
Suspension hanger Quick hanger
for T-bar
Bent T-bar hanger
with threaded rod
Nonius hanger
Metal
product
LAY-IN Tegular
Square & rectangular tiles
BENEFITS
n Diversity of design and application
n Easily assembled and fully
demountable
n Cost effective ceiling solution
n Tiles
are easily lifted out by hand,
allowing full and easy access to the
ceiling void.
APPLICATION AREA
n Used in a variety of ceiling areas:
from small service rooms to large
commercial office buildings and major
transportation terminals.
Project: Leman Cake Decorations :::::::: Architect: Didier Leman
SOLUTION: Tegular 8 with Mircoperforation
:::: 16
LAY-IN tegular
SQUARE & RECTANGULAR TILES
Specification
System Armstrong ceiling system Tegular 2, 8, 11F
and 16
Lay-In solution with visible grid 24 mm
Tile material
galvanised steel sheet 0.5 mm
(0.6 mm for module 750 x 750 mm)
aluminium or further materials on request
Coating RAL 9010 pure white post-coated
powder painted visible surface, other RAL or NCS colours on request
Tile details TEGULAR 2: square tile square edged with
2.5 mm drop and standard notching
TEGULAR 8: square tile square edged with
8 mm drop and standard notching
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on request.
Standard modules TEGULAR 2: TEGULAR 8:
TEGULAR 11F: TEGULAR 16: Grid system 600 x 600 mm
625 x 625 mm
500 x 500 mm
600 x 600 mm
675 x 675 mm
300 x 1200 mm
600 x 1200 mm
600 x 600 mm
625 x 625 mm
600 x 1200 mm
500 x 500 mm
600 x 600 mm
675 x 675 mm
750 x 750 mm
Prelude 24 TLX and XL² (NB: only TLX for Tegular 2)
further suspension systems on request
Perimeter solution Range of standards trims in steel and
aluminium plus custom bulkheads available
Service integration Tegular 2
Tegular 8
Tegular 11F
standard round or rectangular cut-outs
plus customised options on request
Tegular 16
standard perforation patterns
Ultra Microperforation*
Rg 0501
Hole diameter: 0.5 mm
Free area: 0.64 %
*only available for Tegular 2 and Tegular 11F
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Free area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
17 ::::
Acoustic Performance
Colours
Metal ceiling systems have been tested for their acoustic
performance of sound absorption. All perforated products can
be supplied with a variety of factory fitted acoustic infill options.
Please contact us for more information.
Standard colour
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
Thermal Conductivity
(λ) W/mK
50.0: Steel
0.04: Acoustic fleece
RAL 9010
Global White
RAL 9006
RAL 9007
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Sustainability
Armstrong is a certified EN ISO 9001:2008 Quality Assumed
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specificaitons or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Environmental
Our metal panels have an average of up to 30% recycling
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
Acoustics
Safe & Healthy
%
ISO 14021
Recycled
content
(%)
Light
reflectance
(%)
up to
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Ultra Microperforation Rg 0501 (1)
up to 30
83
0.45(L)
D
0.55
18
8
A1
95
scrubbable
✔
✔
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
✔
✔
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standard Perforation Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
0.10
44
19
A1
95
scrubbable
Premium B15*
up to 30
depends on
perforation
0.65
C
0.60
47
21
A2-s1, d0
95
wipeable
moist cloth
✔
Premium OP19*
up to 30
depends on
perforation
1.00
A
0.90
31
15
A2-s2, d0
95
wipeable
moist cloth
✔
Humidity
Fire reaction Resistance
(%) up to
Bioguard
Cleanability paint
option
Scratch
resistance
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
*Premium B15 and OP19 only available for Tegular 8 and Tegular 16, also some sizes of Tegular 2
✔
:::: 18
TEGULAR 2
Detail A Tegular 2 square tile
Cross-section TEGULAR 2
Quick hanger
Ceiling void
Tegular 2
square tile
Main Runner
Cross Tee
Cross Tee
Visible side
Perimeter trim
Longitudinal-section TEGULAR 2
Quick hanger
Ceiling void
Tegular 2
square tile
Cross Tee
Main Runner
Visible side
Perimeter trim
M = module size / A = tile length / B = tile width
19 ::::
TEGULAR 11F
Detail A Tegular 11 F square tile
Cross-section TEGULAR 11F
Quick hanger
Ceiling void
Square tile system
Tegular 11F
Cross Tee
Main Runner
Cross Tee
Visible side
Perimeter trim
Longitudinal-section TEGULAR 11F
Quick hanger
Ceiling void
Square tile system
Tegular 11F
Perimeter trim
M = module size / A = tile length / B = tile width
Cross Tee
Main Runner
Visible side
:::: 20
TEGULAR 8
Detail A Tegular 8 square tile
Cross-section TEGULAR 8
Quick hanger
Ceiling void
Square tile system
Tegular 8
Main Runner
Cross Tee
Cross Tee
Visible side
Perimeter trim
Longitudinal-section TEGULAR 8
Quick hanger
Ceiling void
Square tile system
Tegular 8
Perimeter trim
M = module size / A = tile length / B = tile width
Cross Tee
Main Runner
Visible side
21 ::::
TEGULAR 16
Detail A Tegular 16 square tile
Cross-section TEGULAR 16
Quick hanger
Ceiling void
Square tile system
Tegular 16
Main Runner
Cross Tee
Perimeter trim
Cross Tee
Visible side
Longitudinal-section TEGULAR 16
Quick hanger
Ceiling void
Square tile system
Tegular 16
Perimeter trim
max. M/2
M = module size / A = tile length / B = tile width
Cross Tee
Main Runner
Visible side
:::: 22
Grid system
Detail A: Prelude 24 XL² grid option
Not recommended with Tegular 2 tiles
Detail B: Prelude 24 TLX grid option
Prelude 24
Main Runner
Prelude 24
Main Runner
Prelude 24 XL²
Cross Tee
Compatible system:
Prelude 24 TLX
Cross Tee
TLX: T2, T8, T11F, T16
XL2: T11F, T8, T16
Detail C: Suspension methods
Suspension
wire
Suspension
angle
Suspension hanger Quick hanger
for T-bar
Bent T-bar hanger
with threaded rod
Nonius hanger
Metal
product
LAY-IN Axal Vector
Square & rectangular tiles
BENEFITS
n Can be installed with a very low void
depth
n Clean crisp detailing with 6mm reveal
n Easy to install and remove without tools
n Downwardly accessible.
n Semi-concealed
grid for a monolithic
effect
APPLICATION AREA
n Used in a variety of ceiling areas:
from small service rooms to large
commercial office buildings and major
transportation terminals.
Project: Centostazioni S.p.A. (IT) :::::::: Architect: Cristian Piccolo
SOLUTION: Axiom KE Canopy with Axal Vector
:::: 25
LAY-IN Axal vector
SQUARE & RECTANGULAR TILES
Specification
System Armstrong ceiling system Axal Vector,
Lay-In solution with semi-concealed grid 24 mm
Perimeter solution range of standards trims in steel and
aluminium plus custom bulkheads available
Tile material galvanised steel sheet 0.5 mm
(0.6 mm for module 750 x 750 mm)
(aluminium or further materials on request)
Service integration standard round or rectangular cut-outs
plus customized options on request
Coating RAL 9010 pure white post-coated
powder painted visible surface, other RAL or NCS colours on request
Execution* square tile square edged
Gap solution 6 mm reveal detail, without gasket
Acoustic inlay black non-woven acoustic fleece as
standard. Other options available on
request.
Standard modules 500 x 500 mm
600 x 600 mm
300 x 600 mm
675 x 675 mm
750 x 750 mm
Grid system Prelude XL2 24
* For further information about the edge detail execution of metal tiles, please see
the Metal Edge Detail Execution datasheet
standard perforation patterns
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Free area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
with 20 mm plain border
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
with 20 mm plain border
26 ::::
Acoustic Performance
COLOURS
Metal ceiling systems have been tested for their acoustic
performance of sound absorption. All perforated products can
be supplied with a variety of factory fitted acoustic infill options.
Please contact us for more information.
Standard colour
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
Thermal Conductivity
(λ) W/mK
50.0: Steel
0.04: Acoustic fleece
RAL 9010
Global White
RAL 9006
RAL 9007
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Sustainability
Armstrong is a certified EN ISO 9001:2008 Quality Assumed
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specificaitons or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Environmental
Our metal panels have an average of up to 30% recycling
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
Acoustics
Safe & Healthy
%
ISO 14021
Recycled
content
(%)
Light
reflectance
(%)
up to
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Ultra Microperforation Rg 0501 (1)
up to 30
83
0.45(L)
D
0.55
18
8
A1
95
scrubbable
✔
✔
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
✔
✔
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standard Perforation Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
0.10
44
19
A1
95
scrubbable
Premium B15*
up to 30
depends on
perforation
0.65
C
0.60
47
21
A2-s1, d0
95
wipeable
moist cloth
✔
Premium OP19*
up to 30
depends on
perforation
1.00
A
0.90
31
15
A2-s2, d0
95
wipeable
moist cloth
✔
Humidity
Fire reaction Resistance
(%) up to
Bioguard
Cleanability paint
option
Scratch
resistance
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
*Premium B15 and OP19 only available for Tegular 8 and Tegular 16, also some sizes of Tegular 2
✔
:::: 27
Cross-section AXAL VECTOR
Quick hanger
Ceiling void
Axal Vector
downwardly removable
Cross Tee
Main Runner
Cross Tee
Visible side
Perimeter trim
Longitudinal-section AXAL VECTOR
Quick hanger
Axal Vector
Perimeter trim
M = module size / A = tile length / B = tile width
Ceiling void
CrossTee
Main Runner
Visible side
28 ::::
Detail A Axal Vector square tile
Detail B Prelude 24 XL² grid system
Prelude 24
Main Runner
Prelude 24 XL²
Cross Tee
Detail C suspension methods
Suspension
wire
Suspension
angle
Suspension hanger for
T-bar
Quick hanger
Bent T-bar hanger
with threaded rod
Nonius hanger
Project: Aviva Stadium (IE) :::::::: Architect: Scott Tallon Walker
SOLUTION: Axal Vector plain
Metal
product
R-L 201 system
Square & rectangular tiles
31 ::::
R-L 201
SQUARE & RECTANGULAR TILES
BENEFITS
n Diversity of design and application
n Easily assembled and fully demountable
n Cost effective ceiling solution
n Panels are easily lifted out by hand, allowing full and easy
access to the ceiling void
n Slim bandraster effect of 38 mm width
APPLICATION AREA
n Used in a variety of ceiling areas: large commercial office
buildings and major transportation terminals.
Specification
System Armstrong ceiling system R-L 201
Lay-In solution with visible grid,
suspension height min. 105 mm
Panel material
Galvanised steel sheet
panel width up to 400 mm 0.6 mm
panel width from 401 mm 0.7 mm
(aluminium or other materials on request)
Coating
RAL 9010 pure white post-coated
powder painted visible surface, other
RAL or NCS colours on request
Execution* Rectangular panel square edged long sides
CA / DA (40 - 55 mm) short sides E3 / F3
(18 mm)
Gap solution 3 mm gap with black gasket on one long
side, optional available without gasket
Acoustic inlay
Black non-woven acoustic fleece as
standard. Other options available on request.
Configurable
dimensions Panel length (A) 600 - 3000 mm
Panel width (B) 275 - 1350 mm
Grid system
U-profile + L-profile
Perimeter solution Range of standard trims in steel and
aluminium plus custom bulkheads available
Service integration Standard round or rectangular cut-outs
plus customised options on request
Special capabilities - trapezoidal panel solution
- can be combined with R-H 200
or other Armstrong products
* For further information about the edge detail execution of metal panels, please see
the Metal Edge Detail Execution datasheet
standard perforation patterns
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Free area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
:::: 32
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance in terms of sound absorption, sound attenuation
and sound reduction. These performance values will depend
upon the perforation and the acoustic infill. Please contact us
for more information on the available factory fitted acoustic
options.
Standard colours
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
Thermal Conductivity
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
RAL 9010
Global White
RAL 9006
RAL 9007
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Armstrong is a certified EN ISO 9001:2008 Quality Assured
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specificaitons or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Sustainability
Environmental
Our metal panels have an average of up to 30% recycling
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
Acoustics
Safe & Healthy
%
ISO 14021
Recycled
content
(%)
Light
reflectance
(%)
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Fire reaction
Humidity
Resistance
(%) up to
Cleanability
up to
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standardperforated Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
0.10
44
19
A1
95
scrubbable
Premium B15
up to 30
depends on
perforation
0.65
C
0.60
47
21
A2-s1, d0
95
wipeable
moist cloth
✔
Premium OP19
up to 30
depends on
perforation
1.00
A
0.90
31
15
A2-s2, d0
95
wipeable
moist cloth
✔
Bioguard
paint option
Scratch
resistance
✔
✔
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
33 ::::
Cross-section
Expansion bolt M6
Ceiling Void
Threaded rod M6
Plug-in clip
Wall anchor
Clamping bracket
U-profile
Hanger for L-profile
L-profile
Cut panel
Perimeter trim
R-L 201 rectangular panel
Visible side
Longitudinal-section
Expansion bolt M6
Threaded rod M6
Ceiling Void
Clamping bracket
U-profile
L-profile
Cut panel
R-L 201 rectangular panel
Perimeter trim
M = module size / A = panel length / B = panel width
Item No.
Designation
Item No.
Designation
BPM 300100
U-profile
BPM 215440
L-profile
BPM 300119
Connector for U-profile
BPM 300343
Connector for L-profile
BPM 300120
Plug-in clip
BPM 300307
Hanger for L-profile
BPM 300140
Wall anchor
BPM 311303
Hexagonal bolt M6 x 16 mm
BPM 300121
Clamping bracket
BPM 311103
Hexagonal nut M6
BPM 311111
Expansion bolt M6 x 30 mm
BPM 311305
Washer M6 18 x 1.6 mm
BPM 311099
Threaded rod M6 x 1‘000 mm
Visible side
:::: 34
Detail A R-L 201 panel
Detail B Grid system
Hexagonal bolt M6
Hexagonal nut M6
Washer M6
Fall 3
Fall A
Expansion bolt M6
Threaded rod M6
Clamping bracket
Plug-in clip
Fall A
Wall anchor
Fall 3
Connector
for U-profile
Connector for L-profile
U-profile
Plug-in clip
Hanger for L-profile
Detail C
L-profile
Suspension methods
Clamping
bracket
Hanger for
U-profile
Combi Nonius hanger
with Nonios top-part
Combi Nonius hanger
with eye wire
Belgium & Luxembourg
Armstrong Building Products B.V.
Postbus 3803
4800 DV Breda
Netherlands
Tel.: +32 02 223 00 72
Fax: +31 (0) 76 521 04 07
e-mail: benelux-info@armstrong.com
www.armstrongplafonds.be
Germany & Switzerland
Armstrong Building Products
Kundenservice
Office Building Quadrium
Claudius Prinsenlaan 126
4818 CP Breda
Netherlands
Tel.: +49 (0) 251 7603 210
Fax: +49 (0) 251 7603 593
e-mail: deutsche-info@armstrong.com
www.armstrongdecken.de
www.armstrong-decken.at
www.armstrong.ch
Firmensitz
Armstrong Building Products GmbH
Robert-Bosch-Str. 10
48153 Münster
Germany
Armstrong Metalldecken AG
Breitfeldstrasse 8
9015 St. Gallen
Switzerland
Tel.: +41 (0) 71 313 63 63
Fax: +41 (0) 71 313 64 00
e-mail: gema@armstrong.com
www.armstrong.ch
www.gema.biz
Zentralschweiz
Armstrong Metalldecken AG
Büro / Lager Zentralschweiz
Grossweid 9
6026 Rain
Switzerland
Tel.: +41 (0) 41 921 63 63
Fax: +41 (0) 41 921 63 80
e-mail: gema@armstrong.com
www.armstrong.ch
www.gema.biz
Armstrong Plafonds Métalliques SA
Bureau et Dépôt Suisse Romande
Avenue de Châtelaine 87
1219 Châtelaine
Suisse
Tel.: +41 (0) 22 731 60 70
Fax: +41 (0) 22 731 60 74
e-mail: gema@armstrong.com
www.armstrong.ch
www.gema.biz
Austria
Armstrong Metalldecken GmbH
Bundesstrasse 70
6830 Rankweil
Austria
Tel.: +43 (0) 55 22 34 44-0
Fax: +43 (0) 55 22 34 44-8
e-mail: gema@armstrong-decken.at
www.armstrong-decken.at
www.gema.biz
Armstrong Metalldecken GmbH
Messendorferstrasse 6
8041 Graz
Austria
Tel.: +43 (0) 316 471 584
Fax: +43 (0) 316 471 584-10
e-mail: gema@armstrong-decken.at
www.armstrong-decken.at
www.gema.biz
Spain & Portugal
Armstrong Building Products SAS
Immeuble Paryseine
3, allee de la Seine
94854 Ivry-sur-Seine Cedex
France
Phone: + 34 91 642 04 99
info-espana@armstrong.com
www.armstrongtechos.es
France
Armstrong Building Products SAS
Bureaux Commerciaux France
Immeuble Paryseine
3 Allée de la Seine
94854 Ivry-sur-Seine
France
Tel.: 0800 41 36 43
Fax: +33 1 45 21 04 11
e-mail: info-France@armstrong.com
www.armstrongplafonds.fr
Siège social
Armstrong Building Products SAS
67 rue de Salins – CS 20089
25302 Pontarlier Cedex
France
Italy & Greece
Armstrong Building Products
Uffi cio Commerciale Italia
Immeuble Paryseine
3 Allée de la Seine
94854 Ivry-sur-Seine
France
Tel.: +39 02 66 22 76 50
Fax: +39 02 66 20 14 27
e-mail: info-italia@armstrong.com
www.armstrongsoffitti.it
Netherlands
Armstrong Building Products B.V.
Postbus 3803
4800 DV Breda
Netherlands
Tel.: (+31) 076 523 02 00
Fax: (+31) 076 521 04 07
e-mail: benelux-info@armstrong.com
www.armstrongceilings.nl
United Kingdom
Armstrong World Industries Ltd
Building Products Division
Armstrong House
38 Market Square
Uxbridge UB8 1NG
United Kingdom
Tel.: 0800 371 849
Fax: +44 1895 274287
e-mail: sales-support@armstrong.com
www.armstrongceilings.co.uk
Republic of Ireland
Armstrong World Industries Ltd.
108 Greenlea Road
Terenure
Co Dublin 6W
Ireland
Tel.: 1800 409002
Tel.: (+353) 1 499 1701
Fax: (+353) 1 490 7061
e-mail: sales-support@armstrong.com
www.armstrongceilings.ie
Central
Europe North
(DK/EE/FIN/IS/LT/LV/N/PL/S)
Armstrong Building Products BV
Sp. z o.o. Oddział w Polsce
ul. Domaniewska 37
02-672 Warszawa
Poland
Tel.: (+48) 22 337 86 10/ 86 11
Fax: (+48) 22 337 86 12
e-mail: service-ce@armstrong.com
Latvia: www.armstrong.lv
Lithuania: www.armstrong.lt
Norway: www.armstrong.no
Poland: www.armstrongsufity.pl
Sweden: www.armstrong.se
Central
Europe South
(AL/BA/BG/CZ/HR/HU/KO/
MD/ME/MK/RO/RS/SK/SI)
Armstrong Building Products
Lighthouse building,
Jankovcova 1569/2c,
170 00 Praha 7,
Czech Republic
Tel.: +420 725 477 588
e-mail: service-ce@armstrong.com
Czech Republic: www.armstrong.cz
Hungary: www.armstrong.co.hu
Romania: www.armstrong.ro
Serbia: www.armstrong.rs
Slovakia: www.armstrong.sk
Slovenia: www.armstrong.si
www.armstrongceilings.eu
Eastern
Europe
CIS
Armstrong Moscow GmbH
Mosfi lmovskaya Street 38A,
Moscow 119285,
Russian Federation
Tel.: +7 (495) 258 5100
Fax: + 7 (495) 258 5103
e-mail: info-cis@armstrong.com
Russian Federation:
www.armstrongceilings.ru
MIDDLE EAST /
AFRICA / TURKEY
Armstrong World Industries Ltd
Africa Middle East Turkey
Division
Armstrong House
38 Market Square
Uxbridge UB8 1NG
Tel.: +44 01895 202097
Fax: +44 01895 272928
e-mail: sales-support@armstrong.com
www.armstrong.eu
Israël: www.armstrong.co.il
South Africa:
www.armstrong-ceilings.co.za
Middle East Regional Office,
Dubai, UAE & French Speaking
Africa
Offi ce No. 2003, 20th Floor
Gold Crest Executive Tower
Jumeirah Lakes Towers
P.O. Box 73831
Dubai, United Arab Emirates
Tel.: +971 4 453 4545
Fax: +971 4 453 4546
info-me@armstrong.com
www.armstrong.ae
Turkey
Armstrong Europa GmbH
Mimar Sinan Mah. Mimar Sinan
Cad. No: 35/2 Cekmekoy
Istanbul
Turkey
Gsm: +90 542 772 49 22
Gsm: +90 544 293 5931
www.armstrong.com.tr
etulpar@armstrong.com
10/2015 - PAS1205 - Armstrong Building Products - RCS Besançon B 784 131 575 Printed on chlorine free paper.
Western
Europe