SITE PLAN REVIEW COMMITTEE MEETING
March 9, 2015, Room 2044, 106 Jones Street
1:30 P.M.
AGENDA:
1. 201 Frederick Street – Fisher Barton – Proposed partial closure of Frederick Street
2. Site Plan Review Minutes – February 23, 2015
Construction Minded|Value Sensitive|Civil Engineers
Construction Minded|Value Sensitive|Civil Engineers
Construction Minded|Value Sensitive|Civil Engineers
GATE VALVE
2+63.95, 5.0' LT
GATE VALVE
2+58.95, 0' LT
1+69.38, 0' LT
WET CONNECTION
TAPPING & SLEEVE REQ'D
2+63.95, 0' LT
HYDRANT ASSEMBLY
NOZZLE =XXX
BURY DEPTH =XXX
0+88.48, 0' LT
6"X6"X6" TEE (TYP.)
0+00.00, 23.5' LT
HYDRANT ASSEMBLY
(SALVAGED)
NOZZLE =XXX
BURY DEPTH =XXX
0+05.00, 0' LT
GATE VALVE
0+04.00, 0' LT
SAN MH
RIM - 819.00
8"E - 809.72
SAN MH
RIM - 815.90
8"E - 805.22
SAN MH
RIM - 813.98
8"E - 805.14
8"W - 804.79
12"N - 804.79
DOC #820466
VOL 682 PAGES
69
8-701
LOT 1
Construction Minded|Value Sensitive|Civil Engineers
31'
343.
RAD 48.66'
ARC
LOT 2
GATE VALVE
0+0.00, 5.0' LT
EXISTING FIRE HYDRANT
WET CONNECTION
SALVAGE AND RELOCATE
TAPPING & SLEEVE REQ'D
LOT 3
0+00.00, 0 ' LT
LOT 4
Full Cutoff, wall mount down-light
fixture above egress door. (Bronze)
Exterior Building Mounted Lights:
Wall mounted, full cut-off, 3500K LED
down-light fixture mounted above all egress
doors. Fixtures to be wired into building
emergency back-up power system.
"Bronze" color at earth-tone colored panels.
"Summit White" color at main Entry silver panel.
Full Cutoff, wall mount down-light
fixture above egress door. (Bronze)
Full Cutoff, wall mount down-light
fixture above egress door.
Fixture to be building mounted
and obscured from general
viewing angles, behind accent
band element. ('Summit White"
fixture color against silver panels)
Full Cutoff, wall mount down-light
fixture above egress door. (Bronze)
EXAMPLE BUILDING LIGHT FIXTURE
LUMARK ®
XTOR CROSSTOUR MAXX LED
DESCRIPTION
ORDERING INFORMATION
Sample Number: XTOR5A-N-WT-PC1
Series
LED Kelvin Color
Housing Color
Options (Add as Suffix)
Full Cutoff
XTOR5A=41W
XTOR9A=79W
[Blank]=Bright White (Standard) 5000K
N=Neutral Warm White, 3500K
[Blank]=Carbon Bronze (Standard)
WT=Summit White
347V=347V 1, 2, 3, 4
480V=480V 1, 2, 3, 4, 5
PC1=Photocontrol 120V 6
PC2=Photocontrol 208-277V 6, 7
DIM=0-10V Dimming Driver 1
PMA=Pole Mount Arm (C Drilling) with Round Adapter 2
HA=50ºC High Ambient 4
MS-L20=Motion Sensor for ON/OFF Operation 1, 2, 8, 11
MS/DIM-L20=Motion Sensor for Dimming Operation 1, 2, 8, 9, 10, 11
CBP=Cold Weather Battery Pack 1, 2, 9, 12
Refractive Lens
XTOR5ARL=41W
XTOR9ARL=79W
Summit White at
Main Entrance.
Accessories (Order Separately)
The patented Lumark Crosstour™ MAXX LED Wall Pack Series of
luminaries provides low-profile architectural style with super bright,
energy-efficient LEDs. The rugged die-cast aluminum construction,
back box with secure lock hinges, stainless steel hardware along with a
sealed and gasketed optical compartment make Crosstour impervious
to contaminants. The Crosstour MAXX wall luminaire is ideal for wall/
surface, inverted mount for facade/canopy illumination, perimeter and
site lighting. Typical applications include pedestrian walkways, building
entrances, multi-use facilities, industrial facilities, perimeter parking
areas, storage facilities, institutions, schools and loading docks.
VA1046-XX=2@120° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1033-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1034-XX=2@180° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1035-XX=3@120° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1036-XX=4@90° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1037-XX=2@90° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1038-XX=3@90° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1039-XX=2@120° Tenon Adapter for 2-3/8" O.D. Tenon 13
EWP/XTORMX=Escutcheon Wall Plate, Carbon Bronze
EWP/XTORMX-WT=Escutcheon Wall Plate, Summit White
NOTES: 1 Not available with HA option. 2 Deep back box is standard for 347V, 480V, CBP, PMA, MS-L20 and MS/DIM-L20. 3 Not available with CBP option. 4 Thru-branch wiring not available with HA option or with 347V.
5 Not to be used with un-grounded systems. 6 Not available with MS-L20 and MS/DIM-L20 options. 7 Use PC2 with 347V or 480V option for photocontrol. Factory wired to 208-277V lead. 8 For use in downlight orientation only.
Optimal coverage at mounting heights of 9'-20'. 9 120V or 277V only. 10 Factory set to 50% power reduction after 15-minutes of inactivity. Dimming driver included. 11 Includes integral photo sensor. 12 Operating temperatures
-20°C to 25°C. 13 Replace XX with CB for carbon bronze or WT for summit white.
STOCK ORDERING INFORMATION
41W Series
79W Series
Full Cutoff
XTOR5A=41W, 5000K, Carbon Bronze
XTOR9A=79W, 5000K, Carbon Bronze
XTOR5A-PC1=41W, 5000K, 120V PC, Carbon Bronze
XTOR9A-PC1=79W, 5000K, 120V PC, Carbon Bronze
XTOR5A-WT= 41W, 5000K, Summit White
XTOR9A-WT=79W, 5000K, Summit White
XTOR5A-N=41W, 3500K, Carbon Bronze
XTOR9A-PC2=79W, 5000K, 208-277V PC, Carbon Bronze
Summit White at Main Entrance.
Low-profile LED design with
rugged one-piece, die-cast
aluminum back box and hinged
removable door. Matching housing
styles incorporate both a full cutoff
and refractive lens design. Full
cutoff and refractive lens models
are available in 41W and 79W.
Patent pending secure lock hinge
feature allows for safe and easy
tool-less electrical connections with
the supplied push-in connectors.
Back box includes four 1/2” NPT
threaded conduit entry points. The
back box is secured by four lag
bolts (supplied by others). External
fin design extracts heat from the
fixture surface. One-piece silicone
gasket seals door and back box.
Not recommended for car wash
applications.
Optical
XTOR9A-480V=79W, 5000K, 480V, Carbon Bronze
XTOR9A-PMA=79W, 5000K, Pole Mount Arm, Carbon Bronze
Refractive Lens
XTOR5ARL=41W, 5000K, Refractive Lens, Carbon Bronze
XTOR9ARL=79W, 5000K, Refractive Lens, Carbon Bronze
XTOR5ARL-PC1=41W, 5000K, Refractive Lens, 120V PC, Carbon Bronze
XTOR9ARL-PC1=79W, 5000K, Refractive Lens, 120V PC, Carbon Bronze
XTOR5ARL-WT=41W, 5000K, Refractive Lens, Summit White
XTOR9ARL-WT=79W, 5000K, Refractive Lens, Summit White
XTOR5ARL-N=41W, 3500K, Refractive Lens, Carbon Bronze
XTOR9ARL-PC2=79W, 5000K, Refractive Lens, 208-277V PC, Carbon Bronze
Type
XTOR 5A-N
Project
Fisher Barton Tech Center
Comments
Full Cutoff - LED fixture wired into building
emergency backup power system.
Prepared by
Silicone sealed optical LED
chamber incorporates a custom
engineered reflector providing
high-efficiency illumination.
Full cutoff models integrate an
impact-resistant molded refractive
prism optical lens assembly
meeting requirements for Dark
Sky compliance. Refractive lens
models incorporate a molded lens
assembly designed for maximum
forward throw. Solid state LED
Crosstour luminaries are thermally
optimized with two lumen
packages in cool 5000K or neutral
warm 3500K LED color temperature
(CCT).
Electrical
LED driver is mounted to the
die-cast aluminum housing
for optimal heat sinking. LED
thermal management system
incorporates both conduction and
natural convection to transfer
heat rapidly away from the LED
source. 41W and 79W models
operate in -40°C to 40°C [-40°F to
104°F]. High ambient 50°C [122°F]
models available. Crosstour MAXX
luminaires maintain greater than
90% of initial light output after
72,000 hours of operation. Four
half-inch NPT threaded conduit
entry points allow for thru-branch
wiring. Back box is an authorized
electrical wiring compartment.
Integral LED electronic driver
incorporates surge protection. 120277V 50/60Hz, 480V 60Hz, or 347V
60Hz electrical operation.
battery emergency egress includes
emergency operation test switch,
an AC-ON indicator light and a
premium extended rated sealed
maintenance-free nickel-metal
hydride battery pack. The separate
emergency lighting LEDs are wired
to provide redundant emergency
lighting. Listed to UL Standard 924,
Emergency Lighting.
Area and Site Pole Mounting
Optional extruded aluminum 6-1/2”
arm features internal bolt guides
for supplied twin support rods,
allowing for easy positioning of the
fixture during installation to pole.
Supplied with round plate adapter
plate. Optional tenon adapter fits
2-3/8” or 3-1/2” O.D. Tenon.
Finish
Crosstour MAXX is protected with
a super TGIC carbon bronze or
summit white polyester powder
coat paint. Super TGIC powder coat
paint finishes withstand extreme
climate conditions while providing
optimal color and gloss retention
of the installed life.
XTOR
CROSSTOUR
MAXX LED
Warranty
Five-year warranty.
Emergency Egress
Optional integral cold weather
XTOR9ARL-480V=79W, 5000K, Refractive Lens, 480V, Carbon Bronze
APPLICATIONS:
WALL / SURFACE
INVERTED
SITE LIGHTING
XTOR9ARL-PMA=79W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze
DIMENSIONS
FULL CUTOFF
5-DAY QUICK SHIP ORDERING INFORMATION
41W Series
Date
SPECIFICATION FEATURES
Construction
WG-XTORMX=Crosstour MAXX Wire Guard
PB120V=Field Installed 120V Photocontrol
PB277V BUTTON PC=Field Installed 208-277V Photocontrol 7
VA1040-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1041-XX=2@180° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1042-XX=3@120° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1043-XX=4@90° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1044-XX=2@90° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1045-XX=3@90° Tenon Adapter for 3-1/2" O.D. Tenon 13
Catalog #
DEEP BACK BOX
REFRACTIVE LENS
79W Series
DEEP BACK BOX
11"
[279mm]
11"
[279mm]
Full Cutoff
XTOR5A-CBP=41W, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR9A-CBP=79W, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR5A-480V=41W, 5000K, Carbon Bronze, 480V
XTOR9A-N=79W, 3500K, Carbon Bronze
CERTIFICATION DATA
XTOR5A-PC2=41W, 5000K, Carbon Bronze, 208-277V PC
Refractive Lens
XTOR5ARL-PC2=41W, Refractive Lens, 5000K, Carbon Bronze, 208-277V PC
XTOR9ARL-CBP=79W, Refractive Lens, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR5ARL-CBP=41W, Refractive Lens, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR9ARL-N=79W, Refractive Lens, 3500K, Carbon Bronze
8-3/4"
[222mm]
6-1/4"
[159mm]
OPTIONAL POLE MOUNT ARM
XTOR5ARL-480V=41W, Refractive Lens, 5000K, Carbon Bronze, 480V
8-3/4"
[222mm]
7"
[178mm]
ARM DRILLING
6"
[152mm]
7"
[178mm]
ESCUTCHEON PLATES
TYPE "C"
4-1/2"
[114mm]
6-1/2"
[165mm]
13-1/2" [343mm]
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH130015
2015-01-22 09:23:12
UL/cUL Wet Location Listed
LM79 / LM80 Compliant
ROHS Compliant
NOM Compliant Models
3G Vibration Tested
UL924 Listed (CBP Models)
IP66 Rated
TECHNICAL DATA
2-5/8"
[67mm]
40°C Ambient Temperature
External Supply Wiring 90°C Minimum
3/4" [19mm]
Dia. Hole
19-1/4"
[489mm]
3" [77mm]
1-1/2" [39mm]
(2) 9/16" [15mm]
Dia. Holes
EPA
Effective Projected Area (Sq. Ft.):
XTOR5A/XTOR9A = 0.54
With Pole Mount Arm = 0.98
SHIPPING DATA:
19-1/4" [489mm]
Approximate Net Weight:
12-15 lbs. [5.4-6.8 kgs.]
ADH130015
2015-01-22 09:23:12
LUMARK ®
D ES C R IPTION
The patented Lumark Crosstour™ Floodlight Kit easily attaches to the
Crosstour LED Wall Pack luminaire. The floodlight kit converts 7W, 18W
and 26W Crosstour wall mount luminaires into floodlighting luminaires
suitable for ground or wall mount applications. Crosstour LED offers
seamless architectural style with super bright energy efficient LEDs. The
low-profile, rugged construction of the easy to install knuckle or trunnion
base along with stainless steel hardware, visors and impact guards make
Crosstour LED an “all-in-one” universal product offering that installs
virtually anywhere.
Type
Catalog #
Project
Fisher Barton Tech Center 3500K ground
mounted flood lights.
Comments
Proposed for building accent lighting
landscaped areas.
Date
Prepared by
SPE C IFIC A TION FEA T U R E S
Application
The Crosstour LED luminaire with
knuckle or trunnion floodlight kit is
ideal for floodlight illumination of
ground mounted signage, building
façade architecture or for wall
mount applications where greater
forward throw illumination is
needed.
C on s t r u c t i o n
KNUCKLE FLOODLIGHTING BASE:
Heavy-duty, die-cast aluminum
knuckle base utilizes tooth-lock
adjustment mechanism for both
solid engagement and easy aiming
adjustment. Visual 15° adjustment
indicators allow for 180° rotation of
the luminaire. Knuckle adjustment
is made via the stainless steel
screw. Knuckle is 3G vibration
rated. Knuckle fits 1/2” NPS
available mounting junction box
cover (supplied by others) and is
secured with supplied locking nut.
Attaches directly to the Crosstour
LED Wall Mount back box via the
supplied magnetic stainless steel
hardware.
TRUNNION FLOODLIGHTING
BASE: Adjustable heavy-gauge
steel trunnion-mount utilizes
interlocking slide adjustment
mechanism for precise aiming
and secure installation. Supplied
standard with 12” of pre-wired
SOW 600V wet location rated cord.
Visual 15° adjustment indicators
allow for 180° rotation of the
luminaire. Trunnion base can be
lag bolted to any surface and is 3G
vibration rated. Quickly attaches
to the Crosstour LED Wall Mount
back box via the supplied magnetic
stainless steel hardware.
El e c tri c a l
Three-wire electrical conductor
wire is pre-wired to the knuckle
base allowing easy wiring to
junction box utility power and
to the Crosstour LED luminaire.
Trunnion base includes 12”
SOW cord/whip. The SOW cord
is 18AWG and is rated for -40°C
to 90°C. SOW cord is highly
flexible and features stranded
copper conductors, separator
and is secured in a thermoplastic
elastomeric rubber jacket.
To p Visors and Impact
Gu ard s
Supplied with heavy -duty steel
top visors that quickly attach to the
Crosstour LED Wall Pack 7W, 18W
and 26W housing via the supplied
stainless steel hardware. Crosstour
top visors control glare and spill
light in all directions. Useful in
uplighting applications to limit light
travel above intended wall surface
or sign. 1/8” Thick UV stabilized
impact guards install directly into
the visor via the side-slot lock
feature. Useful in protecting the
Crosstour LED glass lens from
projectile objects when mounted at
low levels.
Fin ish
Crosstour is protected with a
five-stage TGIC Super durable
carbon bronze or summit white
polyester powder coat paint.
Premium TGIC powder coat paint
finishes withstand extreme climate
conditions while providing optimal
color and gloss retention of the
Crosstour installed life.
LUMINAIRE
SOLD SEPERATELY
Crosstour LED
Floodlight Kit
CERTIFICATION DATA
(Floodlight Kit Only)
UL/cUL Wet Location Listed
3G Vibration Rated Trunnion
SHIPPING DATA:
Approximate Net Weight:
1.2 – 1.9 lbs. (0.5 – 0.9 kgs.)
ADH120350
2015-01-22 09:22:48
CR O S S TO U R L ED FLOODLIGH T K IT
S TOCK OR D ER ING INFORM AT I O N
Knuckle Mount Floodlighting Kit
Trunnion Mount Floodlighting Kit
XTORFLD-KNC=Carbon Bronze Knuckle Base With Locking Nut, Small and Large Top
Visors and Impact Shields
XTORFLD-TRN=Carbon Bronze Trunnion Base With 12" Wet Location SOW Cord, Small and
Large Top Visors and Impact Shields
XTORFLD-KNC-WT=Summit White Knuckle Base With Locking Nut, Small and Large Top
Visors and Impact Shields
XTORFLD-TRN-WT=Summit White Trunnion Base With 12" Wet Location SOW Cord, Small
and Large Top Visors and Impact Shields
D IMENS IONS
SMALL (7W and 18W)
GROUND MOUNT
WALL MOUNT
8-1/4" [210mm]
6-3/4"
[171mm]
6-3/4"
[171mm]
8-1/4" [210mm]
8-1/4"
[206mm]
3-5/8"
[92mm]
5-3/4"
[146mm]
3-1/2"
[89mm]
7-1/8"
[181mm]
7-1/2"
[190mm]
3-7/8"
[98mm]
6-3/4"
[171mm]
8-1/4"
[206mm]
5-7/8"
[149mm]
7-1/8"
[181mm]
5-7/8"
[149mm]
7-1/8"
[181mm]
LARGE (26W)
8"
[203mm]
9-3/4" [248mm]
8"
[203mm]
9-3/4" [248mm]
9-3/4"
[248mm]
4"
[102mm]
6-5/8"
[168mm]
3-1/2"
[89mm]
7-1/2"
[190mm]
TM-21 Lumen
Maintenance
(72,000 Hours)
Theoretical L70
(Hours)
> 92%
> 290,000
XTOR1A Model
25°C
3-7/8"
[98mm]
9-3/4"
[248mm]
7-1/2"
[190mm]
6-3/4"
[171mm]
6-3/4"
[171mm]
7-7/8"
[200mm]
C R I / C C T T AB L E
L UMEN M A INTENA NC E
Ambient
Temperature
7-7/8"
[201mm]
8"
[203mm]
40°C
> 92%
> 290,000
50°C
> 91%
> 270,000
XTOR2A Model
25°C
> 91%
> 270,000
40°C
> 90%
> 260,000
50°C
> 88%
> 225,000
XTOR3A Model
LED Information
XTOR1A
XTOR2A
XTOR2A-N
XTOR3A
XTOR3A-N
Delivered Lumens
(Wall Mount)
722
1,633
1,523
2,804
2,284
Delivered Lumens
(With Flood
Accessory Kit) 1
468
1,060
978
2,168
1,738
B0-U0-G0
B1-U0-G0
B1-U0-G0
B1-U0-G0
B1-U0-G0
5,000
5,000
3,500
5,000
3,500
CRI
(Color Rendering Index)
65
65
70
65
70
Power Consumption
(Watts)
7W
18W
18W
26W
26W
B.U.G. Rating 2
CCT
(Kelvin)
NOTES: 1 Includes shield and visor. 2 B.U.G. Rating does not apply to floodlighting.
25°C
> 91%
> 280,000
40°C
> 91%
> 270,000
50°C
> 89%
> 240,000
C URREN T D R A W
Voltage
Model Series
XTOR1A
XTOR2A
XTOR3A
120V
0.05A
0.15A
0.22A
208V
0.03A
0.80A
0.13A
240V
0.03A
0.07A
0.11A
277V
0.03A
0.06A
0.10A
347V
0.025A
0.058A
0.082A
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH120350
2015-01-22 09:22:48
LUMARK ®
D ES C R IPTION
The patented Lumark Crosstour™ MAXX LED Wall Pack Series of
luminaries provides low-profile architectural style with super bright,
energy-efficient LEDs. The rugged die-cast aluminum construction,
back box with secure lock hinges, stainless steel hardware along with a
sealed and gasketed optical compartment make Crosstour impervious
to contaminants. The Crosstour MAXX wall luminaire is ideal for wall/
surface, inverted mount for facade/canopy illumination, perimeter and
site lighting. Typical applications include pedestrian walkways, building
entrances, multi-use facilities, industrial facilities, perimeter parking
areas, storage facilities, institutions, schools and loading docks.
Catalog #
Type
XTOR 5A-N
Project
Fisher Barton Tech Center
Comments
Full Cutoff - LED fixture wired into building
emergency backup power system.
Date
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
Low-profile LED design with
rugged one-piece, die-cast
aluminum back box and hinged
removable door. Matching housing
styles incorporate both a full cutoff
and refractive lens design. Full
cutoff and refractive lens models
are available in 41W and 79W.
Patent pending secure lock hinge
feature allows for safe and easy
tool-less electrical connections with
the supplied push-in connectors.
Back box includes four 1/2” NPT
threaded conduit entry points. The
back box is secured by four lag
bolts (supplied by others). External
fin design extracts heat from the
fixture surface. One-piece silicone
gasket seals door and back box.
Not recommended for car wash
applications.
Optical
Silicone sealed optical LED
chamber incorporates a custom
engineered reflector providing
high-efficiency illumination.
Full cutoff models integrate an
impact-resistant molded refractive
prism optical lens assembly
meeting requirements for Dark
Sky compliance. Refractive lens
models incorporate a molded lens
assembly designed for maximum
forward throw. Solid state LED
Crosstour luminaries are thermally
optimized with two lumen
packages in cool 5000K or neutral
warm 3500K LED color temperature
(CCT).
El e c tri c a l
LED driver is mounted to the
die-cast aluminum housing
for optimal heat sinking. LED
thermal management system
incorporates both conduction and
natural convection to transfer
heat rapidly away from the LED
source. 41W and 79W models
operate in -40°C to 40°C [-40°F to
104°F]. High ambient 50°C [122°F]
models available. Crosstour MAXX
luminaires maintain greater than
90% of initial light output after
72,000 hours of operation. Four
half-inch NPT threaded conduit
entry points allow for thru-branch
wiring. Back box is an authorized
electrical wiring compartment.
Integral LED electronic driver
incorporates surge protection. 120277V 50/60Hz, 480V 60Hz, or 347V
60Hz electrical operation.
battery emergency egress includes
emergency operation test switch,
an AC-ON indicator light and a
premium extended rated sealed
maintenance-free nickel-metal
hydride battery pack. The separate
emergency lighting LEDs are wired
to provide redundant emergency
lighting. Listed to UL Standard 924,
Emergency Lighting.
Area and S ite P ole Mou n ting
Optional extruded aluminum 6-1/2”
arm features internal bolt guides
for supplied twin support rods,
allowing for easy positioning of the
fixture during installation to pole.
Supplied with round plate adapter
plate. Optional tenon adapter fits
2-3/8” or 3-1/2” O.D. Tenon.
Fin ish
Crosstour MAXX is protected with
a super TGIC carbon bronze or
summit white polyester powder
coat paint. Super TGIC powder coat
paint finishes withstand extreme
climate conditions while providing
optimal color and gloss retention
of the installed life.
XTOR
CROSSTOUR
MAXX LED
Warran ty
Five-year warranty.
Eme rge nc y Egress
Optional integral cold weather
APPLICATIONS:
WALL / SURFACE
INVERTED
SITE LIGHTING
D IMENS IONS
FULL CUTOFF
DEEP BACK BOX
REFRACTIVE LENS
DEEP BACK BOX
11"
[279mm]
11"
[279mm]
CERTIFICATION DATA
8-3/4"
[222mm]
6-1/4"
[159mm]
OP TIONA L POLE M O U N T AR M
8-3/4"
[222mm]
7"
[178mm]
AR M DR I L L I N G
6"
[152mm]
7"
[178mm]
E SCUT CH E ON P L A T E S
TYPE "C"
4-1/2"
[114mm]
6-1/2"
[165mm]
13-1/2" [343mm]
UL/cUL Wet Location Listed
LM79 / LM80 Compliant
ROHS Compliant
NOM Compliant Models
3G Vibration Tested
UL924 Listed (CBP Models)
IP66 Rated
TECHNICAL DATA
2-5/8"
[67mm]
40°C Ambient Temperature
External Supply Wiring 90°C Minimum
3/4" [19mm]
Dia. Hole
19-1/4"
[489mm]
3" [77mm]
1-1/2" [39mm]
(2) 9/16" [15mm]
Dia. Holes
EPA
Effective Projected Area (Sq. Ft.):
XTOR5A/XTOR9A = 0.54
With Pole Mount Arm = 0.98
SHIPPING DATA:
19-1/4" [489mm]
Approximate Net Weight:
12-15 lbs. [5.4-6.8 kgs.]
ADH130015
2015-01-22 09:23:12
X TO R CROS S TO U R M A X X L ED
POWER A ND LUM ENS B Y F I XT U R E M O DE L
LED Information
Delivered Lumens
B.U.G. Rating
CCT
(Kelvin)
CRI
(Color Rendering Index)
Power Consumption
(Watts)
LED Information
Delivered Lumens
B.U.G. Rating
CCT
(Kelvin)
CRI
(Color Rendering Index)
Power Consumption
(Watts)
XTOR5A
XTOR5ARL
XTOR5A-N
XTOR5ARL-N
4,409
4,831
4,136
3,744
B1-U0-G1
B1-U0-G2
B1-U0-G1
B1-U0-G2
5000K
5000K
3500K
3500K
65
65
70
70
41W
41W
43W
42W
XTOR9A
XTOR9ARL
XTOR9A-N
XTOR9ARL-N
7,079
7,367
6,468
6,036
B1-U0-G1
B1-U0-G2
B1-U0-G1
B1-U0-G2
5000K
5000K
3500K
3500K
65
65
70
70
79W
82W
79W
81W
XTOR5A and XTOR9A
Full Cutoff CBP Egress LED
EGRESS Information
XTOR5A and XTOR9A
Refractive Lens CBP Egress LED
Delivered Lumens
509
468
B.U.G. Rating
N.A.
N.A.
4000K
4000K
65
65
1.8W
1.8W
CCT
(Kelvin)
CRI
(Color Rendering Index)
Power Consumption
(Watts)
CUR R ENT D R A W
L UME N MA INT E NA NCE
Model Series
Voltage
XTOR5A
XTOR9A
XTOR5A-CBP
(Fixture/Battery)
XTOR9A-CBP
(Fixture/Battery)
120V
0.35
0.67
0.60/0.25
0.92/0.25
208V
0.20
0.39
--
--
240V
0.18
0.34
--
--
Ambient
Temperature
TM-21
Lumen
Maintenance
(72,000 Hours)
Theoretical L70
(Hours)
XTOR5A Model
25°C
> 92%
> 290,000
40°C
> 91%
> 290,000
50°C
> 89%
> 250,000
XTOR9A Model
277V
0.15
0.29
0.36/0.21
0.50/0.21
347V
0.14
0.26
--
--
480V
0.10
0.19
--
--
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
25°C
> 91%
> 260,000
40°C
> 90%
> 230,000
50°C
> 82%
> 130,000
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH130015
2015-01-22 09:23:12
X TO R CROS S TO U R M A X X L ED
ORDER IN G INFOR M A TION
Sample Number: XTOR5A-N-WT-PC1
Series
LED Kelvin Color
Housing Color
Options (Add as Suffix)
Full Cutoff
XTOR5A=41W
XTOR9A=79W
[Blank]=Bright White (Standard) 5000K
N=Neutral Warm White, 3500K
[Blank]=Carbon Bronze (Standard)
WT=Summit White
347V=347V 1, 2, 3, 4
480V=480V 1, 2, 3, 4, 5
PC1=Photocontrol 120V 6
PC2=Photocontrol 208-277V 6, 7
DIM=0-10V Dimming Driver 1
PMA=Pole Mount Arm (C Drilling) with Round Adapter 2
HA=50ºC High Ambient 4
MS-L20=Motion Sensor for ON/OFF Operation 1, 2, 8, 11
MS/DIM-L20=Motion Sensor for Dimming Operation 1, 2, 8, 9, 10, 11
CBP=Cold Weather Battery Pack 1, 2, 9, 12
Refractive Lens
XTOR5ARL=41W
XTOR9ARL=79W
Summit White at
Main Entrance.
Accessories (Order Separately)
WG-XTORMX=Crosstour MAXX Wire Guard
PB120V=Field Installed 120V Photocontrol
PB277V BUTTON PC=Field Installed 208-277V Photocontrol 7
VA1040-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1041-XX=2@180° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1042-XX=3@120° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1043-XX=4@90° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1044-XX=2@90° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1045-XX=3@90° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1046-XX=2@120° Tenon Adapter for 3-1/2" O.D. Tenon 13
VA1033-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1034-XX=2@180° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1035-XX=3@120° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1036-XX=4@90° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1037-XX=2@90° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1038-XX=3@90° Tenon Adapter for 2-3/8" O.D. Tenon 13
VA1039-XX=2@120° Tenon Adapter for 2-3/8" O.D. Tenon 13
EWP/XTORMX=Escutcheon Wall Plate, Carbon Bronze
EWP/XTORMX-WT=Escutcheon Wall Plate, Summit White
NOTES: 1 Not available with HA option. 2 Deep back box is standard for 347V, 480V, CBP, PMA, MS-L20 and MS/DIM-L20. 3 Not available with CBP option. 4 Thru-branch wiring not available with HA option or with 347V.
5 Not to be used with un-grounded systems. 6 Not available with MS-L20 and MS/DIM-L20 options. 7 Use PC2 with 347V or 480V option for photocontrol. Factory wired to 208-277V lead. 8 For use in downlight orientation only.
Optimal coverage at mounting heights of 9'-20'. 9 120V or 277V only. 10 Factory set to 50% power reduction after 15-minutes of inactivity. Dimming driver included. 11 Includes integral photo sensor. 12 Operating temperatures
-20°C to 25°C. 13 Replace XX with CB for carbon bronze or WT for summit white.
S TOCK OR D ER ING INFORM AT I O N
41W Series
79W Series
Full Cutoff
XTOR5A=41W, 5000K, Carbon Bronze
XTOR9A=79W, 5000K, Carbon Bronze
XTOR5A-PC1=41W, 5000K, 120V PC, Carbon Bronze
XTOR9A-PC1=79W, 5000K, 120V PC, Carbon Bronze
XTOR5A-WT= 41W, 5000K, Summit White
XTOR9A-WT=79W, 5000K, Summit White
XTOR5A-N=41W, 3500K, Carbon Bronze
XTOR9A-PC2=79W, 5000K, 208-277V PC, Carbon Bronze
Summit White at Main Entrance.
XTOR9A-480V=79W, 5000K, 480V, Carbon Bronze
XTOR9A-PMA=79W, 5000K, Pole Mount Arm, Carbon Bronze
Refractive Lens
XTOR5ARL=41W, 5000K, Refractive Lens, Carbon Bronze
XTOR9ARL=79W, 5000K, Refractive Lens, Carbon Bronze
XTOR5ARL-PC1=41W, 5000K, Refractive Lens, 120V PC, Carbon Bronze
XTOR9ARL-PC1=79W, 5000K, Refractive Lens, 120V PC, Carbon Bronze
XTOR5ARL-WT=41W, 5000K, Refractive Lens, Summit White
XTOR9ARL-WT=79W, 5000K, Refractive Lens, Summit White
XTOR5ARL-N=41W, 3500K, Refractive Lens, Carbon Bronze
XTOR9ARL-PC2=79W, 5000K, Refractive Lens, 208-277V PC, Carbon Bronze
XTOR9ARL-480V=79W, 5000K, Refractive Lens, 480V, Carbon Bronze
XTOR9ARL-PMA=79W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze
5 - D A Y Q UIC K S H IP OR D ER I N G I N F O R M AT I O N
41W Series
79W Series
Full Cutoff
XTOR5A-CBP=41W, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR9A-CBP=79W, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR5A-480V=41W, 5000K, Carbon Bronze, 480V
XTOR9A-N=79W, 3500K, Carbon Bronze
XTOR5A-PC2=41W, 5000K, Carbon Bronze, 208-277V PC
Refractive Lens
XTOR5ARL-PC2=41W, Refractive Lens, 5000K, Carbon Bronze, 208-277V PC
XTOR9ARL-CBP=79W, Refractive Lens, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR5ARL-CBP=41W, Refractive Lens, 5000K, Carbon Bronze, Cold Weather Battery Pack
XTOR9ARL-N=79W, Refractive Lens, 3500K, Carbon Bronze
XTOR5ARL-480V=41W, Refractive Lens, 5000K, Carbon Bronze, 480V
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH130015
2015-01-22 09:23:12
DESCRIPTION
Eon 303 - B1 and 303 - B2 are compact, low profile, dimmable, LED
bollards that provide downlight only via a fixed head. 303 - B1 has
a single head on one side of the luminaire and 303 - B2 has two,
integrated heads coming off opposite sides of the luminaire. 303 - B1
and 303 - B2 come standard with universal input LED drivers (120 277V, 50/60 Hz). Dimming is achieved with a standard ELV, reverse
phase dimming driver. Eon fixtures may be used indoors or outdoors
and carry an IP66 rating. Our patented LumaLevelTM leveling system
provides quick installation, easy adjustment, secure mounting and
protection from vibration.
Type
Catalog #
Project
Fisher Barton Technology Center
4000K, Full cut-off, walkway bollard.
Comments
Located along walkways as accent
lighting.
Date
Prepared by
SPECIFICATION FEATURES
A ... Material
Head is precision-machined from
corrosion-resistant 6061-T6 aluminum. Body is extruded aluminum and
mounting base is cast from corrosion
resistant silicone aluminum alloy.
B ... Finish
Fixture and mounting base are
double protected by a RoHS compliant chemical film undercoating and
polyester powdercoat paint finish,
surpassing the rigorous demands of
the outdoor environment. Mounting
base is painted black. Fixture housing
and head are available in a variety
of standard colors. In addition to
the standard five colors offered by
Lumiere, the Eon bollards are also
available in colors to match other outdoor Cooper brands, such as Invue.
See the Finish section in the ordering
detail for more information.
C ... Lens
Clear, tempered glass lens, factory sealed with high temperature
adhesive to prevent water intrusion
and breakage due to thermal shock.
EDGE LIT option: when specified
with the EDGE option, the glass will
be slightly thicker, clear, tempered
and sealed in the same manner
referenced above. The added glass
thickness will offer a brigher line of
light around the edge of the glass that
will accentuate the fixture’s aesthetics
and styling.
D ... Adjustable Mounting Base
Cast aluminum mounting base is
equipped with the patented LumaLevelTM leveling system that includes
mounting chassis, 70 shore neoprene
base, stainless steel hardware and
3/4” conduit entry. It provides quick
installation, easy adjustment, secure
mounting and protection from vibration.
E ... Hardware
Stainless steel hardware is standard
to provide maximum corrosionresistance.
F ... Electrical
Both models come standard with
universal input LED drivers (120-277,
50/60Hz). The standard driver is ELV
reverse phase dimmable.
G ... LED
LEDs are included and available in
three color temperatures (2700K,
3000K & 4000K) and a variety of
optics. Both color temperature and
distribution must be specified when
ordering - see reverse side for details
and catalog logic. 303 - B1 comes
standard with two mini lightbars and
303 - B2 comes standard with four
mini lightbars.
H ... Labels & Approvals
UL and cUL listed, standard wet label.
IP66 rated.
I ... Warranty
Lumiere warrants it’s fixtures against
defects in materials & workmanship
for five (5) years. Auxiliary equipment
such as transformers, ballasts and LED
drivers carry the original manufacturer’s warranty.
303-B1 / 303-B2
15.5 W LED
31 W LED
LED
303-B1
303-B2
7.72”
196mm
BOLLARD
12.70”
323mm
IP66
1.40”
35mm
1.40”
35mm
3.43”
87mm
24.00”
609mm
24.00”
609mm
36.00”
914mm
36.00”
914mm
5.47”
139mm
3.43”
87mm
5.47”
139mm
Specification and Dimensions subject to change without notice.
www.cooperlighting.com
Consult your representative for additional options and finishes.
LED INFORMATION
LED
LEDB2 - 2700 - T2
LEDB2 - 2700 - T4
LEDB2 - 2700 - T5X
LEDB2 - 3000 - T2
LEDB2 - 3000 - T4
LEDB2 - 3000 - T5X
LEDB2 - 4000 - T2
LEDB2 - 4000 - T4
LEDB2 - 4000 - T5X
LEDB4 - 2700 - T2
LEDB4 - 2700 - T4
LEDB4 - 2700 - T5X
LEDB4 - 3000 - T2
LEDB4 - 3000 - T4
LEDB4 - 3000 - T5X
LEDB4 - 4000 - T2
LEDB4 - 4000 - T4
LEDB4 - 4000 - T5X
Watts
15.5
15.5
15.5
15.5
15.5
15.5
15.5
15.5
15.5
31
31
31
31
31
31
31
31
31
Distribution
Type II - Lateral Throw
Type IV - Forward Throw
Type V - Flood
Type II - Lateral Throw
Type IV - Forward Throw
Type V - Flood
Type II - Lateral Throw
Type IV - Forward Throw
Type V - Flood
Type II - Lateral Throw
Type IV - Forward Throw
Type V - Flood
Type II - Lateral Throw
Type IV - Forward Throw
Type V - Flood
Type II - Lateral Throw
Type IV - Forward Throw
Type V - Flood
Total Lumens
725
709
626
1209
1181
1044
1436
1410
1247
2393
2350
2078
CRI
95
85
65
95
85
65
95
85
65
95
85
65
95
85
65
95
85
65
°K
2700
2700
2700
3000
3000
3000
4000
4000
4000
2700
2700
2700
3000
3000
3000
4000
4000
4000
Life (hrs.)
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
50000
Volts
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
Universal Input (120 - 277V, 50/60Hz)
NOTES AND FORUMULAS
•
•
Apply appropriate light loss factors where necessary.
Photometry is LM-79 compliant.
ORDERING INFORMATION
Sample Number: 303 - B1 - LEDB1 - 3000 - UNV - T2 - BZ
303-B1 = LED single head bollard
Color Temperature
2700= 2700K
3000= 3000K
303-B2 = LED dual head bollard
4000= 4000K
Series
Optics
T2 = Type II, Lateral Throw
T4 = Type IV, Forward Throw
T5X = Type V, Extra Wide Flood
Consult factory for other optics
Quantity of Mini Lightbars
LEDB2 = Light Emitting Diode,
Rev B., Two Mini Lightbar (B1 only)
LEDB4 = Light Emitting Diode,
Rev B., Four Mini Lightbars (B2 only)
Input Voltage
UNV= Universal 120 - 277V,
50/60Hz
Finish
Painted
BK = Black
BZ = Bronze
CS = City Silver
VE = Verde
DIMELV = Trailing Edge Phase WT = White
Dimming Driver
AP = Grey (Invue)
DP = Dark Platinum (Invue)
GM = Graphite Metallic (Invue)
Dimming
Notes: * Consult your Cooper Lighting representative for additional options and finishes
Specification and Dimensions subject to change without notice.
www.cooperlighting.com
Options
Height
EDGE
= Edgelit Clear
24=24” Height
Tempered
36=36” Height
Glass Lens
Consult your representative for additional options and finishes.
STREETWORKS
D ES C R IPTION
The Galleon™ LED luminaire delivers exceptional performance in a
highly scalable, low-profile design. Patented, high-efficiency AccuLED
Optics™ system provides uniform and energy conscious illumination to
walkways, parking lots, roadways, building areas and security lighting
applications. IP66 rated and UL/cUL Listed for wet locations.
TM
Type
Catalog #
Project
Fisher Barton Technology Center
Example - Parking Lot Pole Light Fixture
Comments
4000K, LED, Bronze finish, pole
mounted
Date
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
El e c tri c a l
Extruded aluminum driver
enclosure thermally isolated from
Light Squares for optimal thermal
performance. Heavy-wall, diecast aluminum end caps enclose
housing and die-cast aluminum
heat sinks. A unique, patent
pending interlocking housing and
heat sink provides scalability with
superior structural rigidity. 3G
vibration tested. Optional toolless hardware available for ease
of entry into electrical chamber.
Housing is IP66 rated.
LED drivers are mounted to
removable tray assembly for ease
of maintenance. 120-277V 50/60Hz,
347V 60Hz or 480V 60Hz operation.
Standard with 0-10V dimming.
Shipped standard with Cooper
Lighting proprietary circuit module
designed to withstand 10kV of
transient line surge. The Galleon
LED luminaire is suitable for
operation in -40°C to 40°C ambient
environments. For applications
with ambient temperatures
exceeding 40°C, specify the HA
(High Ambient) option. Light
Squares are IP66 rated. 90% lumen
maintenance expected at 60,000
hours. Available in standard 1A
drive current and optional 530mA
and 700mA drive currents.
Optics
Patented, high-efficiency injectionmolded AccuLED Optics. Optics
are precisely designed to shape
the distribution maximizing
efficiency and application spacing.
AccuLED Optics create consistent
distributions with the scalability
to meet customized application
requirements. Offered standard
in 4000K (+/- 275K) CCT 70 CRI.
Optional 6000K CCT and 3000K
CCT.
and 120° apart, the EA extended
arm may be required. Refer to the
arm mounting requirement table
on page 3. Round pole adapter
included. For wall mounting,
specify wall mount bracket option.
3G vibration rated.
Fin ish
Housing finished in Super durable
TGIC polyester powder coat paint,
2.5 mil nominal thickness for
superior protection against fade
and wear. Heat sink is powder
coated black. Standard colors
include black, bronze, grey,
white, dark platinum and graphite
metallic. RAL and custom color
matches available.
GAN
GALLEON LED
1-10 Light Squares
Solid State LED
Warran ty
Five-year warranty.
Mounti ng
AREA / ROADWAY LUMINAIRE
Extruded aluminum arm includes
internal bolt guides allowing for
easy positioning of fixture during
assembly. Designed for pole or
wall mounting. When mounting
two or more luminaires at 90°
DIMENS IONS
POLE MOUNT
3-15/16"
[100mm]
21-3/4" [553mm]
“A”
"B"
WALL MOUNT
CERTIFICATION DATA
7" [178mm]
21-3/4" [553mm]
10-5/32"
[256mm]
UL/cUL Wet Location Listed
ISO 9001
LM79 / LM80 Compliant
3G Vibration Rated
ARRA Compliant
IP66 Rated
DesignLights Consortium® Qualified*
6-3/16"
[157mm]
2-7/16"
[61mm]
DIMENSION DATA
Number of
Light Squares
“A” Width
“B” Standard
Arm Length
“B” Optional
Arm Length 1
Weight with Arm
(lbs.)
EPA with Arm
(Sq. Ft.)
1-4
15-1/2" (394mm)
7" (178mm)
10" (254mm)
33 (15.0 kgs.)
0.96
5-6
21-5/8" (549mm)
7" (178mm)
10" (254mm)
44 (20.0 kgs.)
1.00
7-8
27-5/8" (702mm)
7" (178mm)
13" (330mm)
54 (24.5 kgs.)
1.07
9-10
33-3/4" (857mm)
7" (178mm)
16" (406mm)
63 (28.6 kgs.)
1.12
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120V-277V 50/60Hz
347V & 480V 60Hz
-40°C Min. Temperature
40°C Max. Temperature
50°C Max. Temperature (HA Option)
2
TEM
D
ER
C
*www.designlights.org
YS
S
S
NOTES: 1. Optional arm length to be used when mounting two fixtures at 90° on a single pole. 2. EPA calculated with optional arm length.
TIFIE
ADW140425
2014-05-29 14:31:15
GAN G A L L EO N L ED
OPTIC O R IENTA TION
D RIL L ING P A T T ERN
Street Side
Street Side
TYPE "N"
Street Side
2"
[51mm]
1-3/4"
[44mm]
3/4" [19mm]
Diameter
Hole
7/8" [22mm]
(2) 9/16" [14mm]
Diameter
Holes
House Side
House Side
House Side
Optics Rotated Left @ 90° [L90]
Standard
Optics Rotated Right @ 90° [R90]
OPTICAL D IS TR IB UTIONS
Asymmetric Area Distributions
T2
(Type II)
SL2
(Type II with Spill Control)
T3
(Type III)
SL3
(Type III with Spill Control)
T4FT
(Type IV Forward Throw)
Asymmetric Roadway Distributions
RW
(Rectangular Wide Type I)
T2R
(Type II Roadway)
T4W
(Type IV Wide)
SL4
(Type IV with Spill Control)
Symmertric Distributions
T3R
(Type III Roadway)
5NQ
(Type V Square Narrow)
5MQ
(Type V Square Medium)
5WQ
(Type V Square Wide)
Specialized Distributions
AFL
(Automotive Frontline)
SLL
(90° Spill Light Eliminator Left)
SLR
(90° Spill Light Eliminator Right)
AR M MO UNTING R EQUIR E M E N T S
Configuration
90° Apart
120° Apart
GAN-AE-01
7" Arm
(Standard)
7" Arm
(Standard)
GAN-AE-02
7" Arm
(Standard)
7" Arm
(Standard)
GAN-AE-03
7" Arm
(Standard)
7" Arm
(Standard)
GAN-AE-04
7" Arm
(Standard)
7" Arm
(Standard)
GAN-AE-05
10" Extended Arm
(Required)
7" Arm
(Standard)
GAN-AE-06
10" Extended Arm
(Required)
7" Arm
(Standard)
GAN-AE-07
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GAN-AE-08
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GAN-AE-09
16" Extended Arm
(Required)
16" Extended Arm
(Required)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
4 @ 90°
2 @ 180°
Triple1
2 @ 90°
Triple2
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
2 @ 120°
ADW140425
2014-05-29 14:31:15
GAN G A L L EO N L ED
NOMINAL POW ER A ND LU M E N S ( 1 A)
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
56
107
157
213
264
315
370
421
475
528
Input Current @ 120V (A)
0.47
0.90
1.31
1.79
2.21
2.64
3.09
3.51
3.96
4.41
Input Current @ 208V (A)
0.28
0.51
0.74
1.02
1.25
1.48
1.76
1.99
2.22
2.50
Input Current @ 240V (A)
0.25
0.45
0.65
0.90
1.10
1.30
1.55
1.75
1.95
2.20
Input Current @ 277V (A)
0.23
0.41
0.59
0.82
1.00
1.18
1.41
1.59
1.77
2.00
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
5,272
10,303
15,373
20,313
25,168
30,118
35,618
40,357
45,018
49,842
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,597
10,938
16,321
21,565
26,719
31,974
37,813
42,844
47,792
52,914
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B4-U0-G4
B4-U0-G5
5,374
10,501
15,669
20,704
25,652
30,697
36,303
41,134
45,884
50,802
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,493
10,735
16,017
21,164
26,222
31,379
37,110
42,048
46,904
51,930
B1-U0-G2
B1-U0-G2
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,405
10,562
15,760
20,824
25,801
30,875
36,514
41,372
46,150
51,096
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,335
10,426
15,556
20,555
25,468
30,476
36,042
40,838
45,554
50,436
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
B4-U0-G5
5,263
10,285
15,347
20,278
25,124
30,066
35,556
40,288
44,940
49,756
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,373
10,500
15,667
20,701
25,649
30,693
36,298
41,128
45,878
50,794
B1-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,105
9,976
14,886
19,669
24,370
29,163
34,488
39,078
43,591
48,262
B1-U0-G2
B1-U0-G3
B1-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,542
10,830
16,160
21,352
26,455
31,658
37,439
42,421
47,320
52,392
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
5,644
11,029
16,457
21,745
26,942
32,241
38,128
43,202
48,191
53,356
B3-U0-G1
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G5
5,659
11,059
16,501
21,803
27,014
32,327
38,230
43,317
48,320
53,498
B3-U0-G1
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G5
B5-U0-G5
B5-U0-G5
4,722
9,227
13,767
18,191
22,539
26,971
31,897
36,141
40,315
44,635
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,492
10,732
16,014
21,159
26,216
31,372
37,101
42,038
46,893
51,918
B2-U0-G1
B3-U0-G1
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
5,512
10,771
16,072
21,236
26,311
31,486
37,236
42,191
47,063
52,107
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADW140425
2014-05-29 14:31:15
GAN G A L L EO N L ED
NOMINA L POW ER A ND LU M E N S ( 7 0 0 M A)
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
38
72
105
138
176
210
243
276
314
348
Input Current @ 120V (A)
0.32
0.59
0.86
1.14
1.45
1.72
2
2.28
2.58
2.86
Input Current @ 208V (A)
0.21
0.36
0.51
0.67
0.87
1.02
1.18
1.34
1.53
1.69
Input Current @ 240V (A)
0.19
0.32
0.45
0.59
0.77
0.90
1.04
1.18
1.35
1.49
Input Current @ 277V (A)
0.20
0.29
0.40
0.51
0.69
0.80
0.91
1.02
1.20
1.31
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
3,854
7,531
11,237
14,847
18,395
22,013
26,033
29,497
32,904
36,430
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
4,091
7,995
11,929
15,762
19,529
23,370
27,638
31,316
34,932
38,676
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,928
7,676
11,453
15,133
18,750
22,437
26,534
30,065
33,537
37,132
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
4,015
7,846
11,707
15,469
19,166
22,936
27,124
30,733
34,283
37,957
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,951
7,720
11,519
15,221
18,858
22,567
26,688
30,240
33,732
37,347
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
3,900
7,620
11,370
15,024
18,615
22,276
26,343
29,849
33,296
36,864
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
3,847
7,518
11,217
14,821
18,364
21,975
25,988
29,447
32,847
36,368
B1-U0-G1
B1-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,927
7,675
11,451
15,131
18,747
22,434
26,531
30,061
33,533
37,126
B1-U0-G1
B1-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,731
7,292
10,880
14,376
17,812
21,315
25,208
28,562
31,861
35,275
B1-U0-G2
B1-U0-G2
B1-U0-G3
B1-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G4
B2-U0-G5
B2-U0-G5
B3-U0-G5
4,051
7,916
11,811
15,606
19,336
23,139
27,365
31,006
34,587
38,294
B2-U0-G1
B3-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
B5-U0-G3
B5-U0-G3
4,125
8,062
12,029
15,894
19,692
23,565
27,869
31,577
35,224
38,999
B2-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
4,136
8,083
12,061
15,936
19,745
23,628
27,943
31,661
35,318
39,103
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G4
3,451
6,744
10,063
13,296
16,474
19,714
23,314
26,416
29,467
32,625
B1-U0-G1
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
4,014
7,844
11,704
15,465
19,162
22,930
27,118
30,726
34,274
37,948
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
4,029
7,873
11,747
15,522
19,231
23,014
27,216
30,838
34,399
38,086
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADW140425
2014-05-29 14:31:15
GAN G A L L EO N L ED
NOMINAL POW ER A ND LU M E N S ( 5 3 0 M A)
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
30
54
80
105
130
159
184
209
234
259
Input Current @ 120V (A)
0.25
0.45
0.66
0.86
1.07
1.32
1.52
1.72
1.93
2.14
Input Current @ 208V (A)
0.17
0.28
0.39
0.51
0.63
0.78
0.9
1.02
1.14
1.26
Input Current @ 240V (A)
0.17
0.25
0.35
0.45
0.55
0.70
0.80
0.90
1.00
1.10
Input Current @ 277V (A)
0.19
0.24
0.32
0.40
0.49
0.64
0.72
0.80
0.89
0.98
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
3,079
6,017
8,978
11,862
14,697
17,588
20,800
23,567
26,289
29,106
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
3,269
6,388
9,531
12,593
15,603
18,672
22,082
25,020
27,909
30,900
B1-U0-G1
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
3,138
6,133
9,150
12,091
14,980
17,926
21,200
24,021
26,795
29,667
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,208
6,269
9,354
12,359
15,313
18,325
21,671
24,555
27,390
30,326
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,156
6,168
9,203
12,161
15,067
18,030
21,323
24,160
26,950
29,839
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,116
6,088
9,084
12,004
14,872
17,797
21,047
23,848
26,602
29,453
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,074
6,006
8,962
11,842
14,672
17,558
20,764
23,527
26,244
29,056
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,138
6,132
9,149
12,089
14,978
17,924
21,197
24,018
26,791
29,662
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
2,981
5,826
8,693
11,486
14,231
17,030
20,140
22,820
25,456
28,184
B0-U0-G1
B1-U0-G2
B1-U0-G3
B1-U0-G3
B1-U0-G3
B2-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G4
B2-U0-G5
3,236
6,324
9,437
12,469
15,449
18,487
21,863
24,773
27,634
30,595
B1-U0-G0
B2-U0-G1
B3-U0-G1
B3-U0-G2
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
3,296
6,441
9,610
12,698
15,733
18,828
22,266
25,229
28,142
31,158
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G3
3,305
6,458
9,636
12,732
15,775
18,878
22,325
25,296
28,217
31,241
B2-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
2,757
5,388
8,040
10,623
13,162
15,751
18,627
21,105
23,543
26,066
B1-U0-G1
B1-U0-G2
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
3,207
6,267
9,351
12,356
15,309
18,320
21,666
24,549
27,384
30,319
B2-U0-G1
B3-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
3,219
6,290
9,385
12,401
15,365
18,387
21,745
24,638
27,484
30,429
B1-U0-G1
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
B3-U0-G3
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADW140425
2014-05-29 14:31:15
GAN G A L L EO N L ED
L UMEN M ULTIPLIER
Ambient
Temperature
Lumen Multiplier
0°C
1.02
10°C
1.01
25°C
L U M E N M AI N T E N AN C E
1.00
40°C
0.99
50°C
0.97
Ambient
Temperature
TM-21 Lumen
Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
25°C
> 94%
> 350,000
40°C
> 93%
> 250,000
50°C
> 90%
> 170,000
OR D ER ING INFOR M A TION
Sample Number: GAN-AE-04-LED-U-T3R-BZ
Product
Family 1
GAN=Galleon
Light Engine
AE=1A Drive
Current
Number of
Light Squares 2
01=1
02=2
03=3
04=4
06=6
07=7
08=8
09=9
10=10
Lamp Type
Voltage
Distribution
Color
Mounting
LED=Solid
State Light
Emitting
Diodes
U=Universal (120-277V)
8=480V 3
9=347V 3
T2=Type II
T2R=Type II Roadway
T3=Type III
T3R=Type III Roadway
T4FT=Type IV Forward Throw
T4W=Type IV Wide
5NQ=Type V Narrow
5MQ=Type V Square Medium
5WQ=Type V Square Wide
SL2=Type II w/Spill Control
SL3=Type III w/Spill Control
SL4=Type IV w/Spill Control
SLL=90° Spill Light Eliminator Left
SLR=90° Spill Light Eliminator Right
RW=Rectangular Wide Type I
AFL=Automotive Frontline
AP=Grey
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
[Blank]=Arm for
Round or
Square Pole
EA=Extended Arm 4
MA=Mast Arm
Adapter 5
WM=Wall Mount
Options (Add as Suffix)
Accessories (Order Separately)
2L=Two Circuits 6, 7
7030=70 CRI 3000K 8
7060=70 CRI 6000K 8
530=Drive Current Factory Set to 530mA 9
700=Drive Current Factory Set to 700mA 9
3=Three-Position Terminal Block
P=Button Type Photocontrol (120, 208, 240 or 277V)
4=NEMA Twistlock Photocontrol Receptacle
4N7=NEMA 7-PIN Twistlock Photocontrol Receptacle
HA=50°C High Ambient 7
MS/DIM-L08=Motion Sensor for Dimming Operation, Maximum 8' Mounting Height 10, 11, 12, 13
MS/DIM-L20=Motion Sensor for Dimming Operation, 9'-20' Mounting Height 10, 11, 12, 13
MS/DIM-L40=Motion Sensor for Dimming Operation, 21' - 40' Mounting Height 10, 11, 12, 13
MS/X-L08=Bi-Level Motion Sensor, Maximum 8' Mounting Height 12, 13, 14, 15
MS/X-L20=Bi-Level Motion Sensor, 9'-20' Mounting Height 12, 13, 15
MS/X-L40=Bi-Level Motion Sensor, 21' - 40' Mounting Height 12, 13, 15
DIMRF-LW=LumaWatt Wireless Sensor, Wide Lens for 8' - 16' Mounting Height 14
DIMRF-LN=LumaWatt Wireless Sensor, Narrow Lens for 16' - 40' Mounting Height 14
L90=Optics Rotated 90° Left
R90=Optics Rotated 90° Right
MT=Factory Installed Mesh Top
TH=Tool-less Door Hardware
LCF=Light Square Trim Plate Painted to Match Housing
HSS=Factory Installed House Side Shield 16
OA/RA1016=NEMA Photocontrol Multi-Tap - 105-285V
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
SA1252=10kV Surge Module Replacement
SA1036-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon
SA1037-XX=2 @ 180° Tenon Adapter for 2-3/8" O.D. Tenon
SA1197-XX=3 @ 120° Tenon Adapter for 2-3/8" O.D. Tenon
SA1188-XX=4 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon
SA1189-XX=2 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon
SA1190-XX=3 @ 90° Tenon Adapter for 2-3/8" O.D. Tenon
SA1191-XX=2 @ 120° Tenon Adapter for 2-3/8" O.D. Tenon
SA1038-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon
SA1039-XX=2 @ 180° Tenon Adapter for 3-1/2" O.D. Tenon
SA1192-XX=3 @ 120° Tenon Adapter for 3-1/2" O.D. Tenon
SA1193-XX=4 @ 90° Tenon Adapter for 3-1/2" O.D. Tenon
SA1194-XX=2 @ 90° Tenon Adapter for 3-1/2" O.D. Tenon
SA1195-XX=3 @ 90° Tenon Adapter for 3-1/2" O.D. Tenon
FSIR-100=Wireless Configuration Tool for Occupancy Sensor 17
GAN-MT1=Field Installed Mesh Top for 1-4 Light Squares
GAN-MT2=Field Installed Mesh Top for 5-6 Light Squares
GAN-MT3=Field Installed Mesh Top for 7-8 Light Squares
GA-MT4=Field Installed Mesh Top for 9-10 Light Squares
LS/HSS=Field Installed House Side Shield 16, 18
Notes:
1. DesignLights Consortium® Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
2. Standard 4000K CCT and minimum 70 CRI.
3. Requires the use of a step down transformer when combined with MS/DIM, MS/X or DIMRF.
4. May be required when two or more luminaires are oriented on a 90° or 120° drilling pattern. Refer to arm mounting requirement table.
5. Factory installed.
6. 2L is not available with MS/X or MS/DIM at 347V or 480V. 2L in AE-02 through AE-04 requires a larger housing, normally used for AE-05 or AE-06.
7. Not available with LumaWatt wireless sensors.
8. Use dedicated IES files for 3000K and 6000K when performing layouts. These files are published on the Galleon luminaire product page on the website.
9. 1 Amp standard. Use dedicated IES files for 530mA and 700mA when performing layouts. These files are published on the Navion luminaire product page on the website.
10. Consult factory for more information.
11. Replace "U" with specific voltage.
12. The FSIR-100 accessory is required to adjust parameters.
13. Not available with HA option.
14. LumaWatt wireless sensors are factory installed only requiring network components RF-EM1, RF-GW1 and RF-ROUT1 in appropriate quantities. See www.cooperlighting.com for LumaWatt application information.
15. Sensor mounted externally. Available in 2, 3, 4 or 6 Light Square configurations. Replace “X” with number of Light Squares in low output mode. For ON/OFF operation, replace “X” with “0”. Maximum two Light Squares
in low output mode. Not available with dimming driver. No terminal block with bi-level operation.
16. Only for use with SL2, SL3, SL4 and AFL distributions. The Light Square trim plate is painted black when the HSS option is selected.
17. This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your Eaton's Cooper Lighting business representative for additional details.
18. One required for each Light Square.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADW140425
2014-05-29 14:31:15
SITE PLAN REVIEW COMMITTEE
February 23, 2015
The Site Plan Review Committee met on the above date at 1:30 P.M. in Room 2044 of the Municipal Building. The following members were
present: Mayor John David, City Planner Mike Slavney, Jacob Maas and Doug Zwieg of the Building Safety & Zoning Department, Jaynellen
Holloway and Jay Haberkorn of the Engineering Department, Rick Schultz of the Street Department, Greg Michalek and Tim Gordon of the Fire
Department, Curt Kleppin of the Police Department, Kevin Freber of the Wastewater Department, and Robert Schwerer of the Water
Department. Also in attendance were Secretary Nikki Zimmerman, Eric Drazkowski of Excel Engineering, Kim Erdmann, and Michael Koller of
the Watertown Daily Times.
Chairperson Jacob Maas called the meeting to order.
1.
420 E. Horseshoe Road – Clasen – Proposed Expansion
Eric of Excel Engineering was present to explain the proposed project. There are two (2) proposed expansions for this project.
The proposed east portion consists of expanding the number of parking by 20 stalls, adding two (2) docks on the north side, add an
overhead door with access directly to Horseshoe Road which will aid for any future additions, modify pavement to make it easier for
truck maneuvering, and add a 5’ asphalt paving off the existing drive entrance to the south which will be striped for trucks to queue.
The proposed west portion consists of a warehouse addition, two (2) loading docks the larger of which will consist of a compactor, two
(2) silo tanks on the north side, trailer parking, and a drive lane.
The future drive on the south side will be paved and the driveway entrance is proposed to be widened to 50’ to aid in the truck traffic.
The driveway expansion will have to go in front of the Plan Commission for a variance due to the code allowing for a maximum of a
35’ wide driveway entrance.
The water service is proposed to remain as it is without any alterations as will the sanitary sewer. Storm sewer will tie into the existing
storm sewer.
The west addition was going to be constructed over the old fire line and hydrant. Clasen is proposing to shift the fire line and hydrant
to the west so it runs under the trailer parking stalls.
Other items discussed included the following:
-The existing sprinkler system should be checked to verify if it was installed to support future expansion or if modifications
need to be made.
-The exterior of the proposed expansion will match the existing exterior.
A motion was made and seconded to approve this item with the following conditions:
1)
2)
3)
Work with the Fire Department to verify the status of the sprinkler system.
Obtain a driveway variance through the Plan Commission for the 50’ proposal.
Obtain CSM approval through Plan Commission for combining parcels.
Unanimously approved.
2.
201 Frederick Street – Fisher Barton – Proposed Partial Closure of Frederick Street
Due to a lack of a representative to explain the project and answer questions, a motion was made and seconded to table this item.
Unanimously approved.
3.
Site Plan Review Minutes – January 12, 2015
The minutes were reviewed and approved as submitted.
There being no further business to come before this Committee, motion was made and seconded to adjourn. So ordered.
Respectfully submitted,
Nikki Zimmerman, Secretary
NOTE: These minutes are uncorrected and any corrections made thereto will be noted in the proceedings at which these minutes
are approved.