Control and signalling units Ø 30 mm (fixing)
Control units type XB2-M, with chromium plated metal bezel
Complete units
References
Characteristics :
page 5/28
Selector switches with standard handle
Description
Contact
Reference
Weight
kg
2 position
stay put
1 C/O
XB2-MD11
0.185
2 position
1 spring return
from right to left
1 C/O
XB2-MD21
0.185
3 position
stay put
1 C/O
XB2-MD31
0.185
3 position
1 spring return
from left to centre
1 C/O
XB2-MD41
0.185
3 position
2 spring return
to centre
2 C/O
XB2-MD72
0.230
Description
Contact
Reference
Weight
kg
2 position
stay put
Key withdrawal from left hand position
1 C/O
XB2-MG11
0.240
2 position
stay put
Key withdrawal from left and right hand position
1 C/O
XB2-MG21
0.240
2 position
1 spring return from right to left
Key withdrawal from left hand position
1 C/O
XB2-MG31
0.240
3 position
stay put
Key withdrawal from centre position
1 C/O
XB2-MG41
0.240
3 position
stay put
Key withdrawal from left and right hand position
1 C/O
XB2-MG51
0.240
3 position
stay put
Key withdrawal from left hand position
1 C/O
XB2-MG61
0.240
3 position
2 spring return to centre
Key withdrawal from centre position
2 C/O
XB2-MG72
0.285
XB2-MDi
ii
Key switches (Ronis key n° 455)
Other versions
Please consult your Regional customer centre.
47,5 X 44
Ø35
Ø35
24 29
Use sub-assemblies ZB2-RA and ZB2-RC for 3rd and 4th C/O contacts (see
page 5/33).
XB2-MDii
47,5 X 44
XB2-MGii
Additional contacts
32
Te
5/29
5
Control and signalling units Ø 30 mm (fixing)
Type XB2-M, with chromium plated metal bezel
Characteristics, references
References :
pages 5/29 to 5/33
Environment
Conforming to standards
IEC 337-1 and NF C 63-140
Ambient air temperature
Operation : - 25…+ 70 °C.
Degree of protection
IP 65 conforming to IEC 529, IP 655 conforming to NFC 20-30
Contact block characteristics
Rated thermal current
10 A conforming to IEC 337-1, NF C 63-140
Short-circuit protection
10 A cartridge fuse type gl conforming to IEC 337-1B
Cabling
Screw and captive cable clamp terminals. Capacity : 1 x 2.5 mm2 or 2 x 1.5 mm2 with or without cable end.
The Ø 30 mm fixing XB2-M range of control and signalling units, with the advantages of : robustness, water/dust protection, large luminous area.
These products are quick to install and offen : shrouded screw and captive cable clamp terminals (units supplied with screws in open position, ready for wiring),
11
12
0.140
0.140
0.140
0.140
0.140
Black
Green
Red
Yellow
XB2-MP21
XB2-MP31
XB2-MP41
XB2-MP51
0.150
0.150
0.150
0.150
Black
Green
Red
Yellow
Blue
XB2-MC21
XB2-MC31
XB2-MC41
XB2-MC51
XB2-MC61
0.215
0.215
0.215
0.215
0.215
Scheme
Colour
Reference
Weight
kg
Black
Green
Red
Yellow
XB2-MT22
XB2-MT32
XB2-MT42
XB2-MT52
0.300
0.300
0.300
0.300
11
11
12
12
11
XB2-ML21
XB2-ML31
XB2-ML41
XB2-ML51
XB2-ML61
12
Black
Green
Red
Yellow
Blue
11
5
0.135
0.135
0.135
0.135
0.135
12
1 C/O
13
Mushroom head
Ø 40 mm
14
1 C/O
XB2-MA21
XB2-MA31
XB2-MA41
XB2-MA51
XB2-MA61
13
Booted,
short pushbutton
Black
Green
Red
Yellow
Blue
14
1 C/O
Weight
kg
13
Projecting
XB2-MAi
ii
Reference
14
1 C/O
Colour
13
Flush
Scheme
14
Contact
13
Description
14
Pushbuttons, spring return
5/28
Te
23
21
22
2 C/O
Additional contacts
Use sub-assemblies ZB2-RA and ZB2-RC for 2nd, 3rd and 4th C/O contacts (see
page 5/33).
Other versions
Please consult your Regional customer centre.
Pushbuttons
XB2-MAii, MLii
XB2-MPii
XB2-MCii
XB2-MTii
(MQ) 19
Ø40
48X41
56
Ø40
(MP) 15
(ML) 19
(MA) 12
60
Mushroom head
Ø 40 mm
“Push-pull”
Ø35
45
24
15
Panel cut-out
(thickness 1.5 to 6 mm)
for standard size legend plates
+0,5
Ø5
Ø30,5 0
Contact
Ø42
XB2-MTi
ii
Description
24
Pushbuttons, latching with slow break contacts
38
38