HBL offers a comprehensive range of both
Nickel-Cadmium and Lead-Acid battery technologies. To service the railway industry as a whole, our batteries are designed to meet the requirements of major applications including

Switch Machines

Signaling and Controls

Communications

Traction Substations

Generator Starting
At HBL we recognize that public safety, reliability, and system performance are the foundation on which the railway industry was built. We also believe these principles should not add operational costs.
HBL batteries support rail companies’ and transit authorities’ ongoing initiatives to reduce their overall purchase and maintenance costs, while maintaining these exceptional advantages

Long, dependable service life

Maintenance-free and low-maintenance options

Proven electrical performance

Versatile battery system integration

Reliable design and construction
HBL is a worldwide leader in battery manufacturing with over 35 years of experience providing advanced
Nickel-Cadmium and Lead-Acid technologies. Our manufacturing facilities exceed the requirements set forth by ISO 9001 and 14001, OHSAS 18001, and International Railway Industry Standard (IRIS). HBL batteries comply with relevant industry standards (IEC, ASTM, NFPA) where applicable.

The HRL Series was designed with trackside applications in mind.
Utilizing robust pocket plate Nickel-Cadmium technology and special separators allows users a reduced maintenance Ni-Cd solution rugged enough for remote locations.

1.2V cells from 80Ah - 420Ah

Lifting handles for capacities above 265Ah

High-impact Polypropylene container and flame-arresting vent caps

Wide operating temperature range
The SF Series is a 2V Vented Lead-Acid pasted plate design combining cost effectiveness with maximum life and minimum maintenance. It’s durability and capability to support mixed load requirements make this an ideal battery for almost any stationary rail application.

2V cells from 80Ah - 420Ah

Microporous polymer and glass mat separator

High-Impact SAN cell container bonded to ABS lid

Flame-arresting vent caps
The Triumph HP is a premium design VRLA built specifically for consistent performance over a long life for use in a wide range of applications.

2V cells from 100Ah - 1600Ah

Stackable modular configurations allowing for better footprint

High quality Absorbent Glass Mat separator

Zero water top-up required for lifetime of battery

Ease of installation and ready for use

HBL’s Nickel-Cadmium pocket plate batteries are based on designs proven by decades of installations and testing. The active material encapsulated between double perforated steel strips makes the
NCPP a robust and reliable design for various applications.

Single Cell (1.2V) & Block Designs (1.2V-3.6V)

Capacities from 8Ah - 1540Ah

Available in H, M, and L Plate Types

Ability to withstand harsh electrical, mechanical, and environmental operation
HBL’s RRS range offers our Triumph HP technology in a single cell format by encapsulating in an individualized steel module, with carrying handles. This single cell design allows for quick installation and change out in a variety of applications, providing a safe and effective solution.

2 volt cells from 150 - 650Ah

20 years design life in float application

No water top-off for life of battery

Vertical or horizontal installation

Steel case provides protection, ease of maintenance and cell structure
Our OPzS Series tubular plate vented Lead-Acid battery is designed for maximum life, minimum maintenance, and exceptional cycle life.
The high pressure die-cast tubular positive plates make this the appropriate choice for any deep cycle application.

2V cells from 100 - 3000Ah

Transparent SAN containers w/ ABS lid

Large electrolyte reserve

Ease of Maintenance

DIN 40736-1 and DIN 43539-5

This tubular gel valve-regulated Lead-Acid battery is an ideal battery solution for solar powered equipment. Capable of withstanding regular cycling and deep discharge applications, this battery offers both partial state of charge operation and excellent cycle life with no electrolyte top-up required.

2 volt cells from 200 - 1250Ah

12 volt blocks from 60 - 160Ah

Lead-Calcium-Tin alloy spines

Electrolyte immobilized into ThixoGel
Lead-X redefines performance by employing thin plates of
Pure Lead-Tin for a compact, high performance design.
VRLA technology and AGM separators combine to render these batteries spill proof.

2V, 6V, 12V designs available

High energy density and high-rate performance

Good charge retention for longer storage life

Capable of deep discharge recovery and quick recharge
HBL America Inc. is a wholly owned subsidiary of HBL Power Systems Ltd. HBL is one of the world’s largest battery manufacturers with a unique ability to offer Lead-Acid, Nickel-Cadmium, and advanced technology batteries.
Located in Rocky Hill, CT, HBL America brings together sales, service and distribution in a newly equipped, modern facility. Our facility holds a variety of Nickel-Cadmium and Lead-Acid products to reduce lead time for fast turnaround preventing delays our system outages. We also offer battery design, technical advice and commercial support provided by our professional and experience staff.
HBL America offers you an opportunity to source high-quality, cost-effective batteries, battery chargers and ancillary battery equipment from a vertically integrated manufacturer with full control of its own manufacturing base.