7-1/4’’
9-3/4’’
Lux Cube
WPS & WPM SERIES
26W to 250W
9’’
18’’
WPS
WPM
Approvals:
CSA Certified to C22.2 #250 and UL1598.
Suitable for wet locations.
Description
Wall mount luminaire best suited for entrances, underpasses, or anywhere
security lighting is required.
Features
Power Range
Compact wall pack luminaires with integral ballast for use with:
• 70W to 250W metal halide lamp
• 175W to 250W pulse-start metal halide lamp
• 50W to 250W high pressure sodium lamp
• 26W to 42W compact fluorescent lamp
• 40W rectangular induction lamp
Durable Aluminum Housing
The tough, die-cast dark bronze hinged aluminum housing is moisture and
dustproof. Its resistance to weather results in increased longevity.
Dimpled Asymmetric Reflector
The asymmetric aluminum reflector with the dimpled design adds to the efficiency of the Lux Cube. By reflecting light outward and away from the lamp, the
lamp maintains the optimal operating temperature for maximum life.
Ordering Guide
Series
Lamp Type
S - High­Pressure Sodium
WPS
F - Compact Fluorescent
I - Induction
Choose the
Greener alternative
M - Metal Halide
P - Pulse-Start Metal Halide
S - High­Pressure Sodium
Line voltage
Identifier:
Induction features
Lamp and ballast
• Estimated life of lamp is 100,000 hours
• Estimated life of generator is 60,000 hours
• Electronic ballast features high power factor (>0.95), flicker free, instant on/
instant re-strike
• Color temperature: 4100K, 5000K and 6500K available
Warranty
As always, Stanpro is Focused on Quality. For complete warranty details, please
see our terms and conditions.
Number of lamps (for F - Compact Fluorescent only)
M - Metal Halide
WPM
Mounting
The WPS and WPM wall mount directly over standard 4” outlet box or with
surface conduit for indoor or outdoor applications.
Lamp Socket (H.I.D.)
WPSMedium base, pulse-rated lamp socket with a nickel-plated screw
shell and spring-loaded center contact.
WPMMogul base, pulse-rated lamp socket with a nickel-plated screw
shell and spring-loaded center contact.
Wall mounted
13’’
A - 120V (R-NPF)
B - 208V CWI
Lamp Power (W)
Line Voltage (V)
0070, 0100, 0150
P
0175
B, K, P, S, V
0050
A, B, E, H, K, S, V
0070, 0100
A, B, K, P, S, V
0026, 0032, 0042
(select. 1 or 2 lamp)
A, E, H
0040
(rectangular lamp)
D - 208/347V
W - 120/277V
0150
P
0175, 0250
B, K, P, S, V
0175, 0200, 0250
P
0150, 0250
B, K, P, S, V
E - 277V HX
H - 347V HX
Lamp color temp.
(mandatory selection)
/41K - 4100K
/50K - 5000K (standard)
/65K - 6500K
K - 480V CWI
P - 120/277/347V HX or CWA
Options
/C* - Coated lamp
/P____ - Photocell
(specify input voltage)
/L - Polycarbonate guard
/G - Wireguard
/T - Cut-off deflector
/WH - White housing (bronze is
standard)
/FU* - Fusing
/SP - Special color upon request
/H* - HPF capacitor (120V reactor
ballast only)
/TP - Vandal resistant screws
/B* - Quartz stand-by lamp and
control (A, P, V)
* Except for induction lamp
S - 600V CWI
V - 120/240V CWI
Note: Multi-tap ballasts are factory pre-wired to highest voltage, unless other wiring specified.
5905 Chemin de la Côte de Liesse, Saint-Laurent, Quebec, H4T 1C3
Tel.: (514) 739-9984 • Toll Free:1-866-280-2332 • Fax: (514) 739-9912 • www.stanprols.com
The information in this brochure is typical and must not be interpreted as a guarantee of individual product performance and/or characteristics.
Stanpro Lighting Systems Inc. follows a policy of continuous advancements in development. For this reason specifications may change without notice.
409