IOTA ENGINEERING
ILB-CP05
PRODUCT SPECIFICATION SHEET
LED CONSTANT POWER EMERGENCY BATTERY PACK
MODEL NO:
TYPE:
PROJECT:
COMMENTS:
LED OPERATION
5W LED load at 18-48VDC Nominal
DESCRIPTION:
The ILB-CP05 from IOTA Engineering is a UL Recognized LED emergency battery
pack that allows the same LED fixture to be used for both normal and emergency
operation. In the event of a power failure, the ILB-CP05 switches to the emergency
mode and operates the existing fixture for 90 minutes. The unit contains a battery,
charger, and converter circuit in a single can and is available in different mounting
configurations for individual fixture requirements. The ILB-CP05 will operate a nominal
5W LED load with constant power at a rated output voltage of 18V-48V. The Constant
Power design of the ILB-CP05 maintains the output wattage to the LED array even
as the system voltage diminishes.
TECHNICAL SPECIFICATIONS
PRODUCT ADVANTAGES
Constant Power Design maintains emergency
illumination through 90-minute runtime without
suffering light degradation
Two-wire universal AC input
Self-sensing output voltage allows the CP Series
to operate various product types, such as down
lights, troffers, or strips, reducing product SKUs
for emergency options
Input Voltage............................................ (Universal) 120-277VAC, 50/60Hz
FEATURES
Input Rating....................................................................................... 4 Watts
Six mounting configurations available
Output Voltage.............................................................................. 18-48VDC
Output Current...................................... 0.25A (@18VDC) - 0.1A (@48VDC)
Long life high temperature recyclable
Ni-Cad battery
Output Power..................................................................5 Watts (Regulated)
Galvanized steel case
Emergency Operation...................................................................90 minutes
Includes single-piece TBTS test switch and
charge indicator accessory kit
Operating Temp............................................................................0° to 50° C
Battery............................................................... High Temp Nickel-Cadmium
24 Hour Recharge
7-10 Year Life Expectancy
Weight................................................................................. (-A, -R) 3.0 lbs.
(-B, -TM) 2.5 lbs. (-J, -R-J) 2.75 lbs.
UL Conditions of Acceptability..................................... Must be factory wired
Battery temperature must not exceed 50° C
For use with switched or unswitched fixtures
5-Year Warranty. See Warranty Page
for details.
Meets or exceeds all National Electrical Code
and Life Safety Code Emergency Lighting
Requirements
Suitable for use in Damp Locations
CASE DIMENSIONS
9.5″ x 2.375″ x 1.5″ (mounting center 9.0″)
P.O. BOX 11846 TUCSON, AZ 85734
(520) 294-3292 • FAX (520) 741-2837
www.iotaengineering.com
IOTA REV 111213
ILB-CP05
LED CONSTANT POWER EMERGENCY BATTERY PACK
ILB-CP05-A SAMPLE SPECIFICATION
Emergency lighting shall be provided by using a standard LED fixture equipped with
an ILB-CP05-A LED emergency battery pack. The ILB-CP05-A shall consist of
OPTIONS
TEST KIT CONFIGURATION
TBTS
a high temperature, maintenance-free nickel cadmium battery, charger board
and an electronic circuit enclosed in a 9.5″ x 2.375″ x 1.5″ vandal-resistant
galvanized steel case. The unit is designed for installation on the LED fixture or
remote-mounting and is equipped with 3/8″ flex for wiring to the fixture or ballast
compartment. A single-piece test switch and charge indicator accessory kit shall
be included. The LED emergency battery pack shall operate an LED load of up to
MOUNTING CONFIGURATION
-A (Dual Flex unit)
5W with constant wattage at a rated current output of 0.25A - 0.1A for a minimum
of 90 minutes in the emergency mode. The ILB-CP05-A shall have 4 watts of
input power and a battery capacity of 10.9 watt hours. The ILB-CP05-A is UL
Recognized and meets or exceeds all NEC and Life Safety Code Emergency
Lighting Requirements. The ILB-CP05-A features universal input and is warranted
-B (Integral Non-Flex unit)
for a full five (5) years from the date of purchase.
-J (Single Flex Junction Box Mount unit)
ILB-CP05-A SAMPLE WIRING DIAGRAM
ILB-CP WITH TBTS TEST ACCESSORY
-R (Dual Flex unit with Reflector-Mount TBTS switch)
RED/WHITE (+)
ø
-TM (Top-Mounting Non-Flex unit)
÷ UNIT CONNECTOR
WHITE/RED
RED OR RED/BLK
FLEX B
WHITE/BLACK
WHITE/BLACK
ILB
BATTERY
PACK
LED
ARRAY
BLUE/WHITE (-)
FLEX A
BLK/ORG (120 TO 277V, 50/60Hz)
UNSWITCHED
WHITE
COMMON
RED (+)
BLUE (-)
WHITE/BLACK
WHITE/BLACK
COMMON
WHITE
-R-J (Single Flex with Reflector-Mount TBTS switch)
SWITCHED OR
UNSWITCHED LINE
ø
BLACK (120V)
ORANGE (277V)
AC DRIVER
DRIVER (-)
DRIVER (+)
÷ DO NOT MATE CONNECTOR UNTIL INSTALLATION
IS COMPLETE AND AC POWER IS SUPPLIED.
ø TEST ACCESSORY LEADS-OBSERVE PROPER
POLARITY WIRING.
ILBCP_TBTS_A.EPS
REMOTE MOUNTING
When battery packs are remote mounted, consult Customer Service for the maximum allowable distance between the battery
pack and the LEDs.
IOTA REV 111213
IOTA ENGINEERING PO BOX 11846 TUCSON, AZ 85734
TEL: 1-800-866-IOTA (4682) FAX: (520) 741-2837 WEB: www.iotaengineering.com