2016 EPV prices Energy saving lighting controls
• Occupancy sensors
• Dimmers
• Daylight harvesting
• Outdoor motion sensors
EPV Electronics GmbH
Sedanstr. 18
58507 Lüdenscheid
Germany
Phone:+49 2351 6583000
Fax:+49 2351 6583066
info@epvelectronics.com
www.epvelectronics.com
ecos occupancy sensors
Recommended retail prices ex-works Lüdenscheid
For 230V power supply
All 230V sensors (except /K models) feature a powerful built-in double-latch Tungsten relay: max. 2300 VA / 800 A inrush current.
Model
Order no.
Function
RRP excl.
VAT
PM/230V/5
101918
Occupancy sensing only (ON/OFF).
No twillight switch.
Fixed delay time = 10 minutes.
89,00 €
PM/230V/5T
101920
Occupancy sensing only (ON/OFF).
No twillight switch.
Adjustable delay time 10 seconds to 14 minutes. 94,00 €
PM/230V/5L
101919
Occupancy sensing with daylight sensor.
Adjustable delay time 10 seconds to 14 minutes.
Adjustable twilight switch: 100 to 1000 lux.
99,00 €
PM/230V/5K DIM
101926
Occupancy based dimming. Adjustable delay time 10 seconds to 14 minutes.
Adjustable minimum light level 1-5V.
99,00 €
PM/230V/5LSa DIM
101921
Occupancy sensing + daylight dimming (1-10V).
Adjustable delay time 10 seconds to 14 minutes. Adjustable dimming set point (guaranteed lux level)
100 - 1000 lux.
119,00 €
PM/230V/5LSb DIM
101922
Occupancy sensing + daylight dimming (1-10V).
Adjustable delay time 10 seconds to 14 minutes.
Adjustable dimming set point (guaranteed lux level)
100 - 1000 lux.
Switch-off priority: no occupancy.
119,00 €
PM/230V/12
102052
Occupancy sensing only (ON/OFF).
No twilight switch.
Fixed delay time = 10 minutes.
94,00 €
PM/230V/12T
102053
Occupancy sensing only (ON/OFF). No twilight switch.
Adjustable delay time 10 seconds to 14 minutes.
99,00 €
PM/230V/12L
102054
Occupancy sensing with daylight sensor.
Adjustable delay time 10 seconds to 14 minutes.
Adjustable twilight switch: 100 to 1000 lux.
104,00 €
PM/230V/12K
102072
Occupancy based dimming 1-10V.
Adjustable delay time 10 seconds to 14 minutes. Adjustable minimum light level 1-5V.
104,00 €
For up to 5 meter installation height
For up to 12 meter installation height
Scope of delivery: sensor plus WAGO kit with strain relief & cover plus clip to mount the sensors into false /
suspended ceilings.
Other accessories see page “Power Packs”.
Bold print = preferred (stock) models for most applications, regular font = sensors for projects
ecos occupancy sensors
For 24V power supply
Operated either with EPV power packs or integrated into existing building control systems.
Model
Order no.
Function
RRP excl.
VAT
For up to 5 meter installation height
PM24V/5
MASTER
102043
Occupancy sensing only (ON/OFF).
Fixed delay time = 10 minutes.
Potential free relay.
65,00 €
PM/24V/5T
MASTER
102044
Occupancy sensing only (ON/OFF).
Adjustable delay time 10 seconds to 14 minutes.
Potential free relay.
69,00 €
PM/24V/5L
MASTER
102045
Occupancy sensing with daylight sensor.
Adjustable delay time 10 seconds to 14 minutes.
Adjustable twilight level switch: 100 to 1000 lux. Potential free relay.
74,00 €
PM/24V/5K
101792
DIM MASTER
Occupancy based dimming. Adjustable delay time 10 seconds to 14 minutes.
Adjustable minimum light level 1-5V.
74,00 €
PM/24V/5LSa 102049
DIM MASTER
Occupancy sensing + daylight dimming (1-10V).
Adjustable delay time 10 seconds to 14 minutes. Adjustable dimming set point (guaranteed lux level) 100 - 1000 lux. Potential free relay.
89,00 €
PM/24V/5LSb 102050
DIM MASTER
Occupancy sensing + daylight dimming (1-10V).
Adjustable delay time 10 seconds to 14 minutes.
Adjustable dimming set point (guaranteed lux level) 100 - 1000 lux.
Switch-off priority: no occupancy.
Potential free relay.
89,00 €
102293
PM/24V/5Si
DIM MASTER
Sensor designed specifically for integration into building
control systems (e. g. Loxone, WAGO, Beckhoff).
Occupancy sensing + light measurement. Open Collector.
89,00 €
PM/24V/5
SLAVE
SLAVE sensor for coverage area extension for up to 5 meters
installation height. To be used in combination with MASTER
sensor. One MASTER can be extended with up to 30 SLAVES.
50,00 €
101798
For up to 12 meter installation height
PM/24V/12
MASTER
102046
Occupancy sensing only (ON/OFF).
Fixed delay time = 10 minutes.
Potential free relay.
70,00 €
PM/24V/12T
MASTER
102047
Occupancy sensing only (ON/OFF).
Adjustable delay time 10 seconds to 14 minutes.
Potential free relay.
75,00 €
PM/24V/12L
MASTER
102048
Occupancy sensing with daylight sensor.
Adjustable delay time 10 seconds to 14 minutes.
Adjustable twilight level switch: 100 to 1000 lux. Potential free relay.
80,00 €
PM/24V/12K
102128
DIM MASTER
Occupancy based dimming. Adjustable delay time 10 seconds to 14 minutes.
Adjustable minimum light level 1-5V. 80,00 €
PM/24V/12
SLAVE
SLAVE sensor for coverage area extension up to 12 meters
height. To be used in combination with MASTER sensor.
One MASTER can be extended with up to 30 SLAVES.
55,00 €
102127
All 24V sensors are connected via RJ12 cable (standard 6-wire data cable).
Coverage of each MASTER can be exteded with up to 30 SLAVES.
Sensors without dimming operate on 10,8-28V AC and DC.
Models with dimming on 15-28V AC and DC.
Bold print = preferred (stock) models for most applications, regular font = sensors for projects
Power packs
Recommended retail prices ex-works Lüdenscheid
Power packs
For simple plug & play coverage extension. One 24V MASTER and up to 30 SLAVES can be connected to any EPV Power Pack.
All sensors are connected via RJ12 wiring.
Model
Order no.
Function
RRP excl.
VAT
Power Pack XL
DIM
102144
Suitable for dimming + switching.
Powerfull double-latch tungsten relay 2300 VA / 800 A and 1-10V dimming output. Supports all 24V
ecos occupancy sensors (excl. 24V/5LSc).
69,00 €
Power Pack
DALI
102233
DALI Power Pack supports all 24V ecos occupancy
sensors. Requires one 24V MASTER sensor. Supports up to 45 DALI devices. More DALI devices
may be supported with additional DALI power supply.
89,00 €
Power Pack
DIM
102012
Power supply for /K sensors.
Occupancy based dimming.
No relay output, only 1-10V output.
55,00 €
Power Pack
DIM RF
101778
Special model with remote RF receiver and additional
manual dimming mode. Ideal for conference rooms.
Switching and 1-10V output.
159,00 €
HS1 RF
remote control
101400
Single-channel remote control for Power Pack DIM RF.
49,00 €
HS4 RF
remote control
101399
4-channel remote control for Power Pack DIM RF.
55,00 €
Project types
Accessories for occupancy sensors
Spring clip
101683
For the installation of occupancy sensors into suspended one-piece ceilings (plaster board, acoustic
ceilings), in which the standard mounting clip cannot
be used.
8,00 €
Surface mounting enclosure
101472
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed
concrete ceilings).
8,00 €
2-into-1 RJ12
adapters
101382
Used for plugging several 24V sensors together
(MASTER / SLAVE). Rule of thumb: Typically 1 unit per SLAVE sensor
required.
6,00 €
6M RJ12 cable
101871
24V sensor connection.
1-to-1 straight through cable 6P6C. 100% electrically tested.
5,00 €
Cable adapter
KA2 set
101947
Cable adapter to make the transition from RJ11 and
RJ12) to installation cable or individual wires.
RJ12 to 6-pin screw terminal.
10,00 €
Bold print = preferred (stock) models for most applications, regular font = sensors for projects
DIMMTRONIC dimmers
Recommended retail prices ex-works Lüdenscheid
Wall box dimmers
Model
Order no.
Function
RRP excl.
VAT
PAN 600K
100927
Leading-edge dimmer for resistive loads from 60 to 600 Watts and
inductive loads from 25 to 500 VA.
Rotary control / push button dimmer. Push-to-off toggle switch.
4mm metal axle.
With mounted adjustable claws.
42,00 €
PAB 315K
100926
Trailing-edge dimmer for resistive loads from 20 to 315 Watts.
Rotary control / push button dimmer. Push-to-off toggle switch.
4mm metal axle.
With mounted adjustable claws.
39,00 €
EPO 050
100928
Electronic potentiometer EPO 050 = 1-10V.
Maximum current sink 50 mA.
Push-to-off switch. 4mm metal axle.
Dimms 1-10V devices.
33,00 €
101239
Standard front cover with rotary control / push button (50x50mm) for
wall box dimmers.
7,00 €
M1000/5.3
101723
Leading-edge dimmer.
Resistive loads: min. 10 Watts, max. 1000 Watts.
Inductive loads: min. 10 VA, max. 850 VA.
Adjustable min. 0% - 40%
Adjustable dimming curves.
Push-button mode or sensor mode (any 1-10V control).
140,00 €
M1000/3.3
101722
Trailing-edge dimmer.
Resistive loads: min. 10 Watts, max. 1000 Watts.
Capacitive loads: min. 10 VA, max. 850 VA.
Adjustable min. 0% - 40%
Adjustable dimming curves.
Push-button mode or sensor mode (any 1-10 V control).
170,00 €
101997
PWM LED-Dimmer. 2 x 1-10 V, 1 x DMX input.
3 channels, each max. 4 A.
8 function modes.
199,00 €
Accessories for wall box dimmers
DIN rail dimmers
PWM LED-dimmer
PWM34
DAYTRONIC daylight harvesting
Recommended retail prices ex-works Lüdenscheid
Daylight dimming / daylight harvesting sensors
Model
Order no.
Function
RRP
excl. VAT
Light sensor
LS3
100442
Light sensor LS3 for daylight harvesting control including power supply 139,00 €
cable KA01 for ceiling mounting.
Wide adjustable measuring range from 10-2400 lux.
Adjustable dimming set point. Adjustable drop to minimum output (<1V).
1-10V interface with max. load of 50 mA. Power supply 15 VDC.
Power supply
LS3
101603
Power supply for LS3. Input voltage 100-240V.
Output 15 VDC, 1.34 A DIN-rail.
59,00 €
Dimmable electronic ballasts (T8 / T5 / PL), discontinued - only while stock lasts
1-10V DAYTRONIC dimming ballasts with integrated daylight dimming intelligence. These can be used with a
1-10V signal or directly with the small passive DAYTRONIC light sensor (100308)1.
Model
Order no.
1 x 36W T8
100996
2 x 36W T8
100895
2 x 58W T8
100896
single-tube 56,00 €
double-tube
67,00 €
(or 55W PL)
2 x 28W T5
101639
1
sensor not included
Primary dimmable electronic ballasts (dimmable through a dimmer in the 230V supply),
discontinued - only while stock lasts
1 x 18W T8
100251
1 x 58W T8
100254
only single-tube 66,00 €
Accessories for DAYTRONIC ballasts
Model
Order no.
Function
Louver clip
100312
DAYTRONIC louver clip for installation in luminaire louvers where the
small sensor cannot be installed trough a hole in the front lamp cover.
3,00 €
Ceiling clip
100542
DAYTRONIC spring-loaded ceiling clip.
For installation in suspended ceilings.
5,00 €
Outdoor motion sensors
Recommended retail prices ex-works Lüdenscheid
Outdoor motion sensors
Model
Order no.
Function
RRP excl.
VAT
BMW 290
101601
EPV outdoor motion sensor IP55. 290° observation area.
16 m radius. Colour: white.
Without remote control.
90,00 €
BMW 290IR
101600
EPV outdoor motion sensor IP55. 290° observation area.
16 m radius. Colour: white.
With remote control.
115,00 €
Corner
holder
Corner holder for inside & outside corners.
Colour: white. For motion sensor mounting in 90° and 270° corners.
5,50 €
Accessories
101613
Project special solutions
Cannot find what you are looking for? Contact us if you require custom solutions. These include amongst others:
• AIRCOSAVER - energy saving device for air conditioners.
• Project custom solutions.
• OEM - products with customer brand.
• Maintenance-free LED emergency exit lights.
About EPV
Energy efficiency is our speciality
EPV Electronics GmbH has been developing, manufac-
EPV‘s products are almost entirely designed and manu-
turing and distributing innovative control solutions since
factured in Germany (including 100% testing and
1990. With our focus on R&D and engineering, EPV has
ISO 9001 certified manufacturing).
pioneered several successful technologies. In addition
Energy efficiency, made in Germany.
to our own products we also work as a technology partner for renowned OEMs.
EPV Electronics GmbH
Sedanstr. 18
58507 Lüdenscheid
Germany
Phone: +49 2351 6583000
Fax:+49 2351 6583066
info@epvelectronics.com
www.epvelectronics.com