Carrino Special Products
9 Marlborough Road, Colmworth Business Park, Eaton Socon, Cambridgeshire, PE19 8YP
Phone: 01480 281018 Fax: 01480 281010
Email: supply@carrino.co.uk www.carrino.co.uk
Manufacturers of fine Access Floors
CSP Computaflor ‘CP’ & Sentinel ‘SP’
CP30/DS & CP38/DS (PSA), SP30/EMG & SP38/EHG (BSEN)
Launched in 1985, the Computaflor system has been adopted as a standard
and installed throughout the data processing industry – Media, Financial,
Computer Control, Server Rooms / Data Centres and Telecommunications.
Manufactured with an integral edge plastic trim mechanically fixed without
adhesive, the panel is uniquely durable and able to withstand the high
access requirements associated with data cabling and underfloor services.
The Computaflor CSP system incorporates 600 x 600mm panels as
standard, tested to the PSA MOB PF2 PS/SPU specification; the more
recently introduced CSP Sentinel SP panels are designed and tested
around the newer BSEN 12825:2001 (E) standard.
Bespoke panel sizes are available to suit specific requirements such as to
fitting rack or cabinet footprints, and any finish to your specification can be
factory bonded to the panel, such as anti-static, anti-slip or decorative vinyl,
rubber finishes, linoleum, carpet, laminate, aluminium or steel.
Steel pedestals accommodate 50mm up to, and exceeding, 600mm
voids. Lateral stringers are available to provide additional support and
the pedestal understructure accepts up to 4 point mechanical fixing. A full
range of accessories such as air grilles, steps and ramps, hand rails,
risers, skirting, floor boxes and cable grommets is also available.
Computaflor CP30/DS & CP38/DS independently tested to PSA MOB PF2 PS/SPU March 1992 specification
Panel
Type
CP30/DS
CP38/DS
Fire
Resistance
Uniformly
Distributed
Load
kN / m²
Concentrated
Load kN /
300x300 mm
Point Load
kN / 25x25
mm
Deflection
Max (mm)
Safety Factor
Plan Size mm
(bespoke also
available)
Panel
Thickness
mm (including
finish)
Fixing
8.0
4.5
3.0
2.4
3x
600 x 600
34
Gravity lay or
12.0
4.5
4.5
2.4
3x
600 x 600
42
screw down
Independently tested and accredited for compliance to BS476 Part 6 and BS476 Part 7 and satisfies the requirements of current building
regulations with fire barriers introduced at 20 metre centres in any direction.
Sentinel SP30/EMG & SP38/EHG tested to BS EN 12825:2001 (E) specification
Ultimate Load
(kN)
Maximum
Deflection
2.5mm
Safety Factor
Working Load
(kN)
(Concentrated)
Dimensional
Deviation
Fixing
4/A/3/2
9
Class A
3x
3
Class 2
Gravity lay or
6/A/3/2
12
Class A
3x
4
Class 2
screw down
Plan Dimension
(mm)
Core Thickness
(mm)
Factory Bonded
Finishes
Integral PVC
Edge Trim
Panel Thickness
mm [Including
finish]
SP30/EMG
600x600
SP38/EHG
600x600
Panel
Type
Class
SP30/EMG
SP38/EHG
Galvanized Steel mm
Top Plate
Soffit Tray
30
0.5
0.7
Optional
Yes
33
38
0.5
0.7
Optional
Yes
41.5
General system information – Computaflor & Sentinel
Construction
High density particle board core bonded to galvanised steel tray and top sheet. Integral edge trim.
Finish
Bare steel finish or factory bonded : please call with requirements or specification
Carrino Special Products
9 Marlborough Road, Colmworth Business Park, Eaton Socon, Cambridgeshire, PE19 8YP
Phone: 01480 281018 Fax: 01480 281010
Email: supply@carrino.co.uk www.carrino.co.uk
Manufacturers of fine Access Floors
Studies have shown that 75% of hardware failure is caused by dirt. One hour of downtime can cost an average of
£300,000. In comparison to these figures, the cost of preventative maintenance is miniscule (Source: IBM Today)
80% of dust and dirt entering your critical area does so on your feet (Source: 3M)
The CZ30 and CZ38 raised access flooring panels finished with Dycem CleanZone High Performance Contamination
Control prevents over 99% of dust and dirt entering into an area at or near floor level and should be installed at key
entrance points within the zone for maximum affect. CSP CZ30 and CZ38 panels help reduce data loss and hardware
failure by reducing the risk of dust and dirt entering your system.
Integral PVC
Edge Trim
Nominal
Panel
Thickness
[Including
finish]
Weight per
panel (kg)
Top Plate
Soffit Tray
Factory
Bonded
Dycem
CleanZone
30
0.7
0.7
Yes
Yes
34mm
12.5
38
0.7
1.0
Yes
Yes
42mm
15.0
Plan
Dimension
(mm)
Core
Thickness
(mm)
CZ30
600x600
CZ38
600x600
Panel
Type
Galvanised Steel (mm)
Loading Classification to PSA MOB PF2 PS/SPU March 1992
Working Load Criteria
Panel Type
Concentrated Point Load
(kN per 25mm²)
Design Safety
Factor
Uniformly Distributed Load
(kN per m²)
CZ30
3.0
8.0
3x
CZ38
4.5
12.0
3x
The CSP CZ30 and CZ38 CleanRoom systems incorporate 600mm x 600mm panels and can
also be manufactured in bespoke sizes to match specific requirements or obsolete systems.
Each panel is manufactured with a high density particle board core bonded into a galvanised
Dycem CleanZone High
steel tray with a galvanised steel top sheet and faced with
Performance Contamination Control surface polymer, protected by a rigid integral PVC edge
trim. Dycem CleanZone is designed to attract and retain viable and non-viable contamination.
Cobalt
Titanium
Midnight
Slate
Suitable for light wheeled traffic and heavier pedestrian flows.
Dycem CleanZone
Surface Polymer
Integral PVC
Edge Trim
Galvanised Steel
Top Plate
High Density Particleboard
Core (30 or 38mm)
Galvanised Steel
Soffit Tray
Carrino Special Products
9 Marlborough Road, Colmworth Business Park, Eaton Socon, Cambridgeshire, PE19 8YP
Phone: 01480 281018 Fax: 01480 281010
Email: supply@carrino.co.uk www.carrino.co.uk
CSP Special Finishes & Sizes
Bespoke panels to meet unique requirements
Carrino Special Products know that no two projects are the same
so manufacture raised access flooring panels to meet any
specification or requirement - from natural wood finishes for luxury
office use to steel chequer plate for industrial applications.
In addition to the standard 600x600mm size, oversized
bespoke panels are also manufactured to the dimensions you
require to meet your specific project needs.
With panels available to meet PSA medium and heavy grade
loading specifications, and also to the newer BSEN standard,
Carrino Special Products can make your project truly unique.
Bespoke 600x1200mm panel with bonded Noraplan 597
Aluminium Chequer Plate with chrome railing and steps
Natural oak finish
Heavy duty panel with bonded metalized vinyl finish
Bonded Dalsouple DalUni – Blanc Dakota
Carrino Special Products
9 Marlborough Road, Colmworth Business Park, Eaton Socon, Cambridgeshire, PE19 8YP
Phone: 01480 281018 Fax: 01480 281010
Email: supply@carrino.co.uk www.carrino.co.uk
Manufacturers of fine Access Floors