COOLING SYSTEM
Metapower Thermo Electric Cooling (TEC) system for
outdoor / indoor enclosures, kiosks, battery cabinet etc
METAPOWER Thermo Electrical Cooling (TEC) System is one of the solution that allow for
cooling in areas of limited space where conventional cooling methods would be difficult or
impossible. The core of this “air-to-air” cooling unit is the finest range of thermoelectric modules –
optimized for best performance. The heat sink delivers superior performance and economy. The
TEC solution is suitable for requirements of cooling electrical and electronic equipments. The
design is fitted to be implemented in DC powered low-noise environment with small/medium sized
enclosures.
Main Features
-
AC / DC Powered
Compact Design
Low Noise and Low Weight
Easy Integration
Long Lifetime (>10 Years)
Wide Working Temperate (-20°C to +55°C)
IP54 Seal for Enclosure
Benefit
-
-
No Maintenance: No moving parts, integrated chip design, need virtually no maintenance
Compact & Lightweight: Sizes to match your component footprint (no bulky compressor
unit)
Localized Cooling: Spot cooling for component or cooling for small enclosures
Rapid Response Time: Instantaneous temperature change, reduced power consumption
Environmentally Friendly: Contain no materials which may require periodic replenishment
(like freon)
Flexible Operational Implementation: Modules can function in environments that are too
severe/sensitive/small for conventional refrigeration
Flexible Positioning: The coolers are not position or orientation dependent
Wide Range of Application: Suitable for Cabinets in Extreme Environment Condition,
Compact Battery Cabinets Cooling, Rack Cooling, Radio Base Station, Telecom Shelters,
Indoor / Outdoor Cabinets, Power Supply Cabinets, Rectifier Cabinets, Machine Cooling and
many more.
PT METAPLAS HARMONI
INNOVATOR in ELECTRONICS & CO MMU NICATIONS
Perkantoran Kedoya Elok Plaza
Blok DE No. 6-8. Jl.Panjang, Jakarta 11520, Indonesia
Tel: +62-21-5812795, Fax.: +62-21-5812801
E-mail: sales@metaplas.co.id
COOLING SYSTEM
Specification
Type
Cooling Capacity
Technical
Technology
Cooling
Input Voltage
Current Draw
Dimension, cold side (Lc x Wc x Hc)
Dimension, hot side (Lh x Wh x Hh)
Weight
Fan Life (L10 at +40°C)
Working Temperature Range
Noise Level
Protection Rating
Internal Airflow
External Airflow
Power Consumption
MPC-220-48-01-OD
220W
Thermo electric modules, force
air, closed loop (non-mixing), filterless, non-refrigerant
220W (751Btu/h)
48Vdc +/- 20%
6A (max)
350 x 152 x 89 mm
400 x 180 x 89 mm
5.8 Kg
≥70.000 hours
-20°C to +55°C
60dB(A)
IP54
187M3/h (110 CFM)
252M3/h (148.3 CFM)
288W
PT METAPLAS HARMONI
INNOVATOR in ELECTRONICS & CO MMU NICATIONS
Perkantoran Kedoya Elok Plaza
Blok DE No. 6-8. Jl.Panjang, Jakarta 11520, Indonesia
Tel: +62-21-5812795, Fax.: +62-21-5812801
E-mail: sales@metaplas.co.id