High Power VCSEL Laser Igniter
• VCSEL technology
• DPSS pass Q-switch
• High temperature operation
without active cooling.
• Compact rugged design
• High shock/vibration resistance
• High pulse energy and power
density
OPTICAL & ELECTRICAL CHARACTERISTICS
PARAMETER
CONDITIONS
Pulse energy
200A, 50C ambient
Repetition rate
200A, 50C ambient
Pulse duration
200A, 50C ambient
4.5
200A, 50C ambient
12.2
200A, 50C ambient
--
Center wavelength
200A, 50C ambient
Working distance
200A, 50C ambient
Operating temperature
4
12.0
15.0
200A, 50C ambient
Beam M²
10
TYP
--
Operating current
Operating voltage
MIN
Copyright © 2010 Princeton Optronics, Inc.
All Rights Reserved.
Princeton Optronics reserves the right to change
product design and specifications at any time without
notice.
No license is granted by implication or otherwise under
any patents or patent right of Princeton Optronics.
No responsibility is assumed for the use of these
products, nor for any infringement on the rights of
others resulting from the use of these products
180
20
5
UNIT
mJ
ns
20
Hz
12.9
13.5
V
--
5
200
--
1064
3
5
--
MAX
50
220
A
--
nm
10
mm
--
Laser diode product components are intended for use in a
user-devised end system. However, these products are
capable of emitting Class IIIB radiation. Extreme care
must be exercised during their operation. Only persons
familiar with the appropriate safety precautions should
operate a laser product. Directly viewing the laser beam
or exposure to specular reflections must be avoided.
Serious injury may result if any part of the body is
exposed to the beam. The eye is extremely sensitive to
the infrared radiation and therefore, proper eye-wear must
be worn at all times. Use of optical instruments with these
products may increase eye hazard. Always wear eye
protection when operating.
ºC
IV
>100mW
REV. E – Aug. 2016
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: sales@princetonoptronics.com * www.princetonoptronics.com
High Power VCSEL Laser Igniter
Air Cooled Package
Mechanical characteristics:
Copyright © 2010 Princeton Optronics, Inc.
All Rights Reserved.
Princeton Optronics reserves the right to change
product design and specifications at any time without
notice.
No license is granted by implication or otherwise under
any patents or patent right of Princeton Optronics.
No responsibility is assumed for the use of these
products, nor for any infringement on the rights of
others resulting from the use of these products
Laser diode product components are intended for use in a
user-devised end system. However, these products are
capable of emitting Class IIIB radiation. Extreme care
must be exercised during their operation. Only persons
familiar with the appropriate safety precautions should
operate a laser product. Directly viewing the laser beam
or exposure to specular reflections must be avoided.
Serious injury may result if any part of the body is
exposed to the beam. The eye is extremely sensitive to
the infrared radiation and therefore, proper eye-wear must
be worn at all times. Use of optical instruments with these
products may increase eye hazard. Always wear eye
protection when operating.
IV
>100mW
REV. E – Aug. 2016
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: sales@princetonoptronics.com * www.princetonoptronics.com
High Power VCSEL Laser Igniter
Water Cooled Package
Mechanical characteristics:
Coolant I/O:
•Convenient push-on connectors
•Tubing 1/8" ID, 1/4" OD
Copyright © 2010 Princeton Optronics, Inc.
All Rights Reserved.
Princeton Optronics reserves the right to change
product design and specifications at any time without
notice.
No license is granted by implication or otherwise under
any patents or patent right of Princeton Optronics.
No responsibility is assumed for the use of these
products, nor for any infringement on the rights of
others resulting from the use of these products
Laser diode product components are intended for use in a
user-devised end system. However, these products are
capable of emitting Class IIIB radiation. Extreme care
must be exercised during their operation. Only persons
familiar with the appropriate safety precautions should
operate a laser product. Directly viewing the laser beam
or exposure to specular reflections must be avoided.
Serious injury may result if any part of the body is
exposed to the beam. The eye is extremely sensitive to
the infrared radiation and therefore, proper eye-wear must
be worn at all times. Use of optical instruments with these
products may increase eye hazard. Always wear eye
protection when operating.
IV
>100mW
REV. E – Aug. 2016
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: sales@princetonoptronics.com * www.princetonoptronics.com
High Power VCSEL Laser Igniter
Additional Options
Option-1: Laser Driver
• Input : 110 – 120 VAC
• Pulse Enable: +5V TTL
• Pulse Width: 20μs to 500μs
• Max output current: 200A
• Rise/Fall Time: 10μs
• Current Regulation: 1.0%
• Current Ripple: <0.5%
• Current Overshoot: <5%
Option-2: Customized Mount
• Customized mounting tube fits specified plug well.
• Glass or lens seal from combustion chamber.
• Customized beam delivery optics to meet
specified working distance.
Copyright © 2010 Princeton Optronics, Inc.
All Rights Reserved.
Princeton Optronics reserves the right to change
product design and specifications at any time without
notice.
No license is granted by implication or otherwise under
any patents or patent right of Princeton Optronics.
No responsibility is assumed for the use of these
products, nor for any infringement on the rights of
others resulting from the use of these products
Laser diode product components are intended for use in a
user-devised end system. However, these products are
capable of emitting Class IIIB radiation. Extreme care
must be exercised during their operation. Only persons
familiar with the appropriate safety precautions should
operate a laser product. Directly viewing the laser beam
or exposure to specular reflections must be avoided.
Serious injury may result if any part of the body is
exposed to the beam. The eye is extremely sensitive to
the infrared radiation and therefore, proper eye-wear must
be worn at all times. Use of optical instruments with these
products may increase eye hazard. Always wear eye
protection when operating.
IV
>100mW
REV. E – Aug. 2016
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: sales@princetonoptronics.com * www.princetonoptronics.com
High Power VCSEL Laser Igniter
Ordering Information
Water Cooled Package
(Optional)
Laser Driver
(Optional)
PR - LSIG - 12 - W1064 - WC - 1 – TX - LDX
Output Power (mJ)
Wavelength (nm)
Copyright © 2010 Princeton Optronics, Inc.
All Rights Reserved.
Princeton Optronics reserves the right to change
product design and specifications at any time without
notice.
No license is granted by implication or otherwise under
any patents or patent right of Princeton Optronics.
No responsibility is assumed for the use of these
products, nor for any infringement on the rights of
others resulting from the use of these products
Customized Mount
(Optional)
Laser diode product components are intended for use in a
user-devised end system. However, these products are
capable of emitting Class IIIB radiation. Extreme care
must be exercised during their operation. Only persons
familiar with the appropriate safety precautions should
operate a laser product. Directly viewing the laser beam
or exposure to specular reflections must be avoided.
Serious injury may result if any part of the body is
exposed to the beam. The eye is extremely sensitive to
the infrared radiation and therefore, proper eye-wear must
be worn at all times. Use of optical instruments with these
products may increase eye hazard. Always wear eye
protection when operating.
IV
>100mW
REV. E – Aug. 2016
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: sales@princetonoptronics.com * www.princetonoptronics.com