3 Copper Central Office Products Cross-Connect and Interconnect Blocks and Modules Connection Modules STG 2000 4.2 Connection Block BSTG 4.12 High Density Terminal Block BRCP 4.13 Connection Modules RCP 2000 4.15 Cat. 6 Cross-Connects RCP 2000 4.19 Many of the products in this catalog are certified as compliant with RoHS standards. For a complete and updated listing of specific RoHS-compliant products, refer to the 3M Communications Technology website at www.3M.com/ROHS. v. 072507 4.1 3M™ Connection Modules STG 2000 This module offers Cat. 5 transmission performance as a standard. As a result, it is fully compatible with a variety of applications (xDSL, Pairgain™, etc.). Termination is easy, and cable jumpers can be managed from the rear or from the side. Reliability and Performance 3M’s straight IDC technology can offer outstanding performance: • Multiple retermination with all kinds of conductor gauges in the 0,8 to 0,4 mm (20 to 26 AWG) range • Improved wire retention (in all directions) • Gas-tight connection area – corrosion-proof • Tin-lead plating on contacts avoids corrosion • Transmission performances meet Cat. 5 (100 MHz) • 2 wires can be accommodated in the same slot • Very compact design • Specific contacts for stranded wires upon request 4.2 www.3MTelecommunications.com 800-426-8688 Application in Network STG 2000 modules are suitable for public telephony (MDF, cross-connection cabinets, building distribution) as well as for private telephony and high data rates transmission. They are also suitable for high-density installation (4500 pair single-sided cross connection frames, 1600 pairs on 2.6 m (8.53 ft.) vertical MDF, containerized exchanges, etc.). HIGHLIGHTS Cat. 5 as a standard Very compact size 16 mm (0.059 in) pitch 0,4 to 0,8 mm (20 to 26 AWG) wires Optional IDC’s for stranded wires Specific module with rear cable termination Multiple reterminations Comprehensive range of protection circuits and accessories SPECIFICATIONS INSULATION DISPLACEMENT CONTACTS (IDC) FUNCTION AND ACCESSORIES STG U STG C • • STG O Type of contact Continuity (normally closed circuit) Normally opened circuit • Parallel test • • • Serial test • • • (1) (1) (1) (2) (2) (2) (3) (3) • • T-connection Disconnection • Protection magazine Single-pair protection plugs Multi-pair parallel test Fuse protection • Transmission performance Cat. 5 Cat. 5 (1) T-connection: two wires in the same slot (2) Modules with grounding contacts (3) Connection modules with grounding grid STG U PRODUCT ABBREVIATION INSTRUCTIONS Example: STG C2 10 P STG C STG O STG C 2 10 P PU type of module type of circuit (C, U, O) IDC 10 pairs (8 for 8 pairs) contacts for automatic grounding (for protection magazine) grounding grid for single pair protection plugs Cat. 5 Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CONNECTION MODULES STG 2000 4.3 3M™ PROTECTION SOLUTIONS STG 2000 Protection solutions for STG are composed of multi-pair protection magazines as well as a complete range of single-pair protection plugs. Protection Magazine • Front facing magazines suitable for all IDC STG connection modules and BSTG modular blocks, with the relevant protection facilities. • Automatic grounding through the backmount frame/5 kA drain current capacity. • Magazine with earth cord for upgrading standard connection modules or blocks with protection. Single-Pair Protection Plugs • This range of single-pair protection modules is designed to increase flexibility in network management. Protection can be removed separately only on faulty lines. • Wide range of protection circuits from standard overvoltage protection, overvoltage and current protection and fast 5-pole protection. • Disconnection access on the protection plugs allows the use of all STG disconnection and test accessories without removing protection. Single-pair protection modules are suitable for the standard 16 mm (0.059 in.) pitch. One circuit single-pair protection module equals one color. HIGHLIGHTS Comprehensive range of protection Fast 5-point protection Compact design Automatic grounding 4.4 www.3MTelecommunications.com 800-426-8688 BLOCKS Connection Modules Light gray casing on light gray base. PRODUCT NUMBER: C252806A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 U2 8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19360 PRODUCT NUMBER: C252824A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 U2 10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12579 PRODUCT NUMBER: C252809A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19354 PRODUCT NUMBER: C252827A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-19357 Disconnection Modules White casing on light gray base. PRODUCT NUMBER: C252800A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 C2 8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 474491-01038 PRODUCT NUMBER: C252818A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 C2 10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12581 PRODUCT NUMBER: C252803A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19359 PRODUCT NUMBER: C252821A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-19356 Switching Modules Light blue casing on light gray base. PRODUCT NUMBER: C252812A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 O2 8 W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19353 PRODUCT NUMBER: C252830A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 O2 10 W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12583 Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CONNECTION MODULES STG 2000 WITHOUT PROTECTION FACILITY 4.5 3M™ CONNECTION MODULES STG 2000 WITHOUT PROTECTION FACILITY PROTECTORS Protection cartridge to use: SOR CH with 0,75 m (2.46 ft) grounding cord. PRODUCT NUMBER: C233727C DESCRIPTION: STG-SOR CH8 PROT CART W/EARTH CORD, 8-PR EMPTY MIN. ORDER: 20 UPC: 051115-19375 PRODUCT NUMBER: C233728B DESCRIPTION: STG-SOR CH10 PROT CART W/EARTH CORD, 10-PR EMPTY MIN. ORDER: 20 UPC: 051115-19376 PRODUCT NUMBER: C231039A DESCRIPTION: STG-250V 3-POLE ARRESTOR W/FAIL SAFE MIN. ORDER: 500 UPC: 001895-78443 PRODUCT NUMBER: C231040A DESCRIPTION: STG-350V 3-POLE ARRESTOR W/FAIL SAFE MIN. ORDER: 500 UPC: 474491-01551 PRODUCT NUMBER: C222053A DESCRIPTION: STG-3-POLE INSERTION/EXTRACTION TOOL MIN. ORDER: 10 UPC: 001895-79556 4.6 www.3MTelecommunications.com 800-426-8688 BLOCKS Connection Modules Light gray casing on light gray base. PRODUCT NUMBER: C252807A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 U2 8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 474491-01039 PRODUCT NUMBER: C252825A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 U2 10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12585 PRODUCT NUMBER: C252810A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-19355 PRODUCT NUMBER: C252828A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 U2 K10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-19320 Disconnection Modules White casing on light gray base. PRODUCT NUMBER: C252801A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 C2 8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-18032 PRODUCT NUMBER: C252819A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 C2 10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12587 PRODUCT NUMBER: C252804A DIMENSIONS H X W X L MM (IN.): 126 X 14 X 50 (4.96 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K8P W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 051115-18033 PRODUCT NUMBER: C252822A DIMENSIONS H X W X L MM (IN.): 146 X 14 X 50 (5.75 X 0.55 X 1.97) DESCRIPTION: STG2 C2 K10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-16061 Switching Modules Light blue casing on light gray base. PRODUCT NUMBER: C252831A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 O2 10P W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12589 Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CONNECTION MODULES STG 2000 WITH MULTI-PAIR PROTECTION FACILITY 4.7 3M™ CONNECTION MODULES STG 2000 WITH MULTI-PAIR PROTECTION FACILITY PROTECTORS Protection cartridge to use: SOR CH. PRODUCT NUMBER: C233725B DESCRIPTION: STG-SOR CH8 PROT CART-8-PR EMPTY MIN. ORDER: 20 UPC: 001895-78269 PRODUCT NUMBER: C233726B DESCRIPTION: STG-SOR CH10 PROT CART-10-PR EMPTY MIN. ORDER: 20 UPC: 051115-16062 PRODUCT NUMBER: C233736B DESCRIPTION: STG-SOR CH8 PROT CART-8-PR W/250V 3-POLE GDT/FS MIN. ORDER: 400 UPC: 051115-19377 PRODUCT NUMBER: C233740B DESCRIPTION: STG-SOR CH10 PROT CART-10-PR W/250V 3-POLE GDT/FS MIN. ORDER: 400 UPC: 051115-12524 PRODUCT NUMBER: C233737B DESCRIPTION: STG-SOR CH8 PROT CART-8-PR W/350V 3-POLE GDT/FS MIN. ORDER: 400 UPC: 051115-19290 PRODUCT NUMBER: C233741B DESCRIPTION: STG-SOR CH10 PROT CART-10-PR W/350V 3-POLE GDT/FS MIN. ORDER: 400 UPC: 051115-16063 PRODUCT NUMBER: C231039A DESCRIPTION: STG-250V 3-POLE ARRESTOR W/FAIL SAFE MIN. ORDER: 500 UPC: 001895-78443 PRODUCT NUMBER: C231040A DESCRIPTION: STG-350V 3-POLE ARRESTOR W/FAIL SAFE MIN. ORDER: 500 UPC: 474491-01551 PRODUCT NUMBER: C222053A DESCRIPTION: 3-POLE ARRESTER INSERTION/EXTRACTION TOOL MIN. ORDER: 10 UPC: 001895-79556 4.8 www.3MTelecommunications.com 800-426-8688 BLOCKS Disconnection Module White casing on light gray base. PRODUCT NUMBER: C252802A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 C2 8 PU W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 UPC: 474491-00916 PRODUCT NUMBER: C252820A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 C2 10 PU W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12593 Switching Modules Light blue casing on light gray base. PRODUCT NUMBER: C252814A DIMENSIONS H X W X L MM (IN.): 113 X 15,9 X 50 (4.45 X 0.63 X 1.97) DESCRIPTION: STG2 O2 8 PU W/NUMBERING FROM 1 TO 8-CAT 5 MIN. ORDER: 20 PRODUCT NUMBER: C252832A DIMENSIONS H X W X L MM (IN.): 133 X 15,9 X 50 (5.24 X 0.63 X 1.97) DESCRIPTION: STG2 O2 10 PU W/NUMBERING FROM 1 TO 10-CAT 5 MIN. ORDER: 20 UPC: 051115-12595 PROTECTORS Protection plug to use: SOR PU with test and disconnection facility. PRODUCT NUMBER: C233796A DESCRIPTION: SOR PU 1C SINGLE PAIR PROTECTION MODULE W/250V GDT (GREY) MIN. ORDER: 1000 UPC: 051115-12534 cable side jumper side PRODUCT NUMBER: C233797A DESCRIPTION: SOR PU 2C SINGLE PAIR PROTECTION MODULE W/250V GDT (ORANGE) MIN. ORDER: 1000 UPC: 051115-19361 PRODUCT NUMBER: C233798A DESCRIPTION: SOR PU 3C SINGLE PAIR PROTECTION MODULE W/250V GDT (YELLOW) MIN. ORDER: 1000 UPC: 051115-19379 Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CONNECTION MODULES STG 2000 WITH SINGLE-PAIR PROTECTION FACILITY 4.9 3M™ CONNECTION MODULES STG 2000 STG 2000 PROTECTOR VS STG 2000 MODULE SELECTOR 250V GDT 10 PAIR COUNT STG MODULE TYPE Application 1 STG2 U2-x No Protection STG2 C2-x Application 2 Single-Pair Protection Application 3 Multi-Pair Protection STG2 O2-x SOR PU single-pair protection modules C233796A SOR PU1C 250V FQ100004610 STG2 C2-xPU C233797A SOR PU2C 250V FQ100002903 STG2 O2-xPU C233798A SOR PU3C 250V FQ100004628 SOR CH8 empty C233725B0000 FQC233725B1 SOR CH multi-pair protection magazine SOR CH10 empty C233726B0000 FQ100004537 STG2 U2-xP STG2 C2-xP STG2 O2-xP T80A250XFP 250V GDT with fail-safe SOR CH multi-pair protection magazine with ground cord 4.10 8 PAIR COUNT C231039A0000 FQC231039A8 SOR CH8 w/250V GDT C233736B0000 FQ100004560 SOR CH10 w/250V GDT C233740B0000 FQ100004578 empty SOR CH8 w/ earth cord empty SOR CH10 w/ earth cord C233727C0000 FQ100004545 C233728B0000 FQ100004552 www.3MTelecommunications.com 800-426-8688 STG2 U2-x STG2 C2-x STG2 O2-x STG 2000 MODULE BACK MOUNT FRAME (BMF) APPLICATION SELECTOR 8 PAIR COUNT STG MODULE TYPE 10 PAIR COUNT STG BMF STG AND LSA+/QSA BMFS STG BMF STG AND LSA+/QSA BMFS STG2 U2-x STG2 U2-8 C252806A0000 FQ100004719 STG2 U2-K8 C252809A0000 FQ100004735 STG2 U2-10 C252824A0000 FQ100004800 STG2 U2-K10 C252827A0000 FQ100004834 STG2 C2-x STG2 C2-8 C252800A0000 FQ100004669 STG2 C2-K8 C252803A0000 FQ100004693 STG2 C2-10 C252818A0000 FQ100004750 STG2 C2-K10 C252821A0000 FQ100004784 STG2 O2-x STG2 O2-8 C252812A0000 FQ100004982 — STG2 O2-10 C252830A0000 FQ100004859 — STG2 U2-xPU — — — — STG2 C2-xPU STG2 C2-8PU C252802A0000 FQ100004685 — STG2 C2-10PU C252820A0000 FQ100004776 — STG2 O2-xPU STG2 O2-8PU C252814A0000 FQ100005005 — STG2 O2-10PU C252832A0000 FQ100004875 — STG2 U2-xP STG2 U2-8P C252807A0000 FQ100004727 STG2 U2-K8P C252810A0000 FQ100004743 STG2 U2-10P C252825A0000 FQ100004818 STG2 U2-K10P C252828A0000 FQC252828A9 STG2 C2-xP STG2 C2-8P C252801A0000 FQ100004677 STG2 C2-K8P C252804A0000 FQ100004701 STG2 C2-10P C252819A0000 FQ100004768 STG2 C2-K10P C252822A0000 FQ100004792 STG2 O2-xP — — STG2 O2-10P C252831A0000 FQ100004867 — Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CONNECTION MODULES STG 2000 4.11 3M™ CONNECTION BLOCK BSTG The BSTG block is a modular solution block for MDF applications. These blocks are suitable for both line side and exchange side in the main distribution frame. The 16 mm (0.63 in.) pitch between STG connection modules contributes to the compact design of the BSTG block. For instance, 1600 pairs can be installed on a 2.6 m (8.5 ft.) vertical. Equipment cable is routed inside the backmount frame. The blocks are equipped with STG range of multipurpose connection modules with the following facilities: connection/disconnection, test facility, IDC modules with insertion tool, and full range of single or multipair protection plugs. ADVANTAGES BSTG blocks offer all of the advantages of the latest range of STG modules: Cat. 5 transmission performance Very high connection density Fast cabling Completely protected IDC contacts Integrated wire retention A wide range of possible configurations of the blocks is available Blocks with or without protection facility Different labeling configurations Disconnection or connection contacts available Optional contacts for stranded wires (Please consult 3M) HIGHLIGHTS Cat. 5 transmission performance Very compact 16 mm (0.63 in.) pitch 20 to 26 AWG wire Multiple reterminations High density Side or rear cable access BSTG Block D PRODUCT NUMBER: C223090B DESCRIPTION: BSTG U2 10 100,CAT 5 DIMENSIONS H X W X D MM (IN.): 176 X 146 X 87 (6.93 X 5.75 X 3.43) MIN. ORDER: 1 UPC: 051115-19369 PRODUCT NUMBER: C223111B DESCRIPTION: BSTG C2 10 100, CAT 5 FOR SOR CH PROTECTION DIMENSIONS H X W X D MM (IN.): 176 X 146 X 87 (6.93 X 5.75 X 3.43) MIN. ORDER: 1 UPC: 051115-17944 H Each block is equipped with 1 label holder, 10 STG connection modules and 1 backmount frame. W 4.12 www.3MTelecommunications.com 800-426-8688 The BRCP high density terminal block is the latest generation of MDF terminal blocks developed by 3M, specifically designed for xDSL deployment in the Central Office for DSLAMs interconnection with the existing Main Distribution Frame (MDF) as well as for DSLAM interconnection in remote street cabinets. The innovative product design of the BRCP HD block provides superior features enabling both the DSLAM vendor – with its installation contractors – and the xDSL service provider rapid installation and superior density, matching the requirements of current mass xDSL lines deployment. Optimizing the space at the MDF in the Central Office Very compact, the BRCP HD block requires much less space on the horizontal side of the MDF frame, making it also very adapted to confined spaces of remote applications such as shelters or technical rooms in residential or corporate buildings. Thanks to its high density, this product is also very adapted for remote DSL deployment in street cabinets. Designed for xDSL deployment The BRCP HD block is modular by design (16 pair modularity) available in various pair counts enabling perfect match with 8 pair bundles of most DSLAM cable configurations in the market. Swiveling double side – front and rear – design provides a clear demarcation of two termination areas, one at the rear for the DSLAM vendor installation team (direct termination of DSLAM cables), the other at the front for the xDSL service provider team to jumper its DSL subscribers. FEATURES BENEFITS Rear and front facing direct IDC or wire-wrap contacts on front side Direct IDC can reduce installation costs versus costly connectorized blocks (with or without stub cables) Separated termination areas for DSLAM round trip cables (POTS and LINE, at the rear) and subscriber jumpers (at the front) Adapted to service providers using wire wrap connection technique (no specific need for training) Different terminal block pair counts available ranging from 144, 192 to 256 pairs Can reduce installation mistakes such as wrong contact assignment High density of individual 16 pair modules Provides a physical/separation of craft demarcation between two different service teams Wire guide channels Enables perfect match with 8 pair bundles of most DSLAM cable configurations in the market Label holders (block, individual modules, individual pairs or group of pairs) Can reduce installation costs in avoiding costly and time consuming cable splits Cable retention device Can save MDF space in comparison with common terminal blocks in the market Easy attachment to metallic MDF frames Adapted for both MDF, co-location DF and cabinet applications No disconnection point available but testing capabilities Provides professional and efficient wiring management Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ HIGH DENSITY TERMINAL BLOCK BRCP FOR DSLAM INTERCONNECTION 4.13 3M™ HIGH DENSITY TERMINAL BLOCK BCRP SPECIFICATIONS Application 1 block configuration Each half of the block is dedicated to one type of signal POTS + DATA 2 blocks configuration Each block is dedicated to one type of signal POTS + DATA POTS Electrical performance Dimensions Attenuation in the range 3 to 30 MHz: Return loss in the range 3 to 30 MHz: Near end cross talk to 30 MHz: <0.1 dB <-35 dB <45 dB Length: Width: Depth: 144 pairs=135 mm (5.31 in.) 192 pairs=180 mm (7.09 in.) 256 pairs=240 mm (9.45 in.) 130 mm (5.12 in.) 130 mm (5.12 in.) ORDERING INFORMATION PRODUCT NUMBER DESCRIPTION BRCP-HD 256 I BRCP high density terminal block 256 pairs, IDC BRCP-HD 256 W BRCP high density terminal block 256 pairs, WW BRCP-HD 192 I BRCP high density terminal block 192 pairs, IDC BRCP-HD 192 W BRCP high density terminal block 192 pairs, WW BRCP-HD 144 I BRCP high density terminal block 144 pairs, IDC BRCP-HD 144 W BRCP high density terminal block 144 pairs, WW For ordering information, please contact your local 3M representative. 4.14 www.3MTelecommunications.com 800-426-8688 For the high requirements in the efficient communication network. In a cabling systems, connection by modules generally offers greater flexibility at the patching level. Modules also continue to be the only solution truly adapted to the control of large-scale systems. The RCP module family consists of both shielded and technical modules designed for high data rate applications. • Technical modules enable fast installation of interfaces between dissimilar cables (for example a single cable with an RJ45 modular jack). • Modules feature removable electronic boards for a complete solution. The boards can be replaced without removal of the connection module. • The shielded RCP 2000 modules provide shielding from one end of the connection chain to the other for control of EMI. • Label holders and color codes facilitate cable management. • Very easy implementation, permitting direct y-shaped installation of jumpering wires in rear cabling version. HIGHLIGHTS Fast cabling with potential time savings Net improvement in transmission performance above 100 MHz Different solutions for numerous interfaces Twisted pair on D-Sub, coax, RJ45 Line and error monitoring World-wide IDC technique Compact design Cat. 5 Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CONNECTION MODULES RCP 2000 4.15 3M™ CONNECTION MODULES RCP 2000 Shielded Rear-Cables Modules with Metal Cover • Protects against conducted and radiated electromagnetic interferences. • Single-wire and multi-wire cables can be connected to either the upper or lower contacts. Equipped with a bonding comb, a bonding strip, a channeled wire guide with the lower half metallized and a metal cover on the upper half. Dual attachment Metal cover • to HPUL type rail • to Europe E8 type rail Grounding bar Upper surface marking Protected CAD contact Latchable cord with addressing and shielding option Side label holder Metallized channeled wire guide Requires shielded cords 8 pair disconnection module. Blue PRODUCT NUMBER: P45920DH DESCRIPTION: RCP-SHIELDED CAT 5 BLUE MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 051115-19333 Yellow PRODUCT NUMBER: P45840DH DESCRIPTION: RCP-SHIELDED CAT 5 YELLOW MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 051115-19328 Green PRODUCT NUMBER: P45839DH DESCRIPTION: RCP-SHIELDED CAT 5 GREEN MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 051115-19325 Red PRODUCT NUMBER: P45809DH DESCRIPTION: RCP-SHIELDED CAT 5 RED MODULE W/SHIELDED COVER-REAR MIN. ORDER: 80 UPC: 001895-79387 4.16 www.3MTelecommunications.com 800-426-8688 Shielded Rear-Cables Modules • Single-wire and multi-wire cables can be connected to either the upper or lower contacts. • Equipped with a bonding comb, a bonding strip, a channeled wire guide with the lower part. Requires shielded cords 8 pair disconnection module. Blue PRODUCT NUMBER: P45920DF DESCRIPTION: RCP-SHIELDED CAT 5 BLUE MODULE-REAR MIN. ORDER: 80 UPC: 051115-19332 Yellow PRODUCT NUMBER: P45840DF DESCRIPTION: RCP-SHIELDED CAT 5 YELLOW MODULE-REAR MIN. ORDER: 80 UPC: 051115-19327 Green PRODUCT NUMBER: P45839DF DESCRIPTION: RCP-SHIELDED CAT 5 GREEN MODULE-REAR MIN. ORDER: 80 UPC: 051115-19324 Red PRODUCT NUMBER: P45809DF DESCRIPTION: RCP-SHIELDED CAT 5 RED MODULE-REAR MIN. ORDER: 80 UPC: 051115-19322 SUB D • Interface ID connector, patching with plug or cord/connector. • Supplied with 10 contacts crimped to wires disconnect IDC, color yellow. PRODUCT NUMBER: P45632AA DESCRIPTION: RCPT SUB D9 MALE MIN. ORDER: 1 UPC: 051115-19389 PRODUCT NUMBER: P45633AA DESCRIPTION: RCPT SUB D9 FEMALE MIN. ORDER: 1 UPC: 051115-19390 PRODUCT NUMBER: P45630AA DESCRIPTION: RCPT SUB D15 MALE MIN. ORDER: 1 UPC: 474491-00031 PRODUCT NUMBER: P45631AA DESCRIPTION: RCPT SUB D15 FEMALE MIN. ORDER: 1 UPC: 474491-00033 PRODUCT NUMBER: P45628AA DESCRIPTION: RCPT SUB D25 MALE MIN. ORDER: 1 UPC: 474491-00035 PRODUCT NUMBER: P45629AA DESCRIPTION: RCPT SUB D25 FEMALE MIN. ORDER: 1 UPC: 474491-00037 Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CONNECTION MODULES RCP 2000 4.17 3M™ CONNECTION MODULES RCP 2000 9-Pin Modular Jack Connector ISO 8877 With automatic shielding continuity on the profile, providing an interface between the active equipment that has an RJ45 and the distributor frame. PRODUCT NUMBER: P45363AA DESCRIPTION: RCPT 2-RJ45-BSC CABLING CODE MIN. ORDER: 1 UPC: 474491-00029 PRODUCT NUMBER: P45362A5 DESCRIPTION: RCPT 4-RJ45 ETHERNET 100 BASE TX-CAT 5 MIN. ORDER: 1 UPC: 474491-00025 Quadruple Baluns Permit the connection of pairs to coax RG 62 AU fo IBM Type 3278 terminals. PRODUCT NUMBER: P45400AA DESCRIPTION: PCPT 4-COAX RG62 BALUNS – YELLOW MIN. ORDER: 1 UPC: 051115-19391 4.18 www.3MTelecommunications.com 800-426-8688 3M offers a complete punch down system for voice and data cross-connect applications. • The “next generation” of cross-connect and the latest 3M innovation in a broad line of solutions for high speed data networks. • Uses a simple modular approach with a few basic components such as 8-pairs cross-connect modules, back-mount frames and management accessories. • Outstanding connecting block performance. Its near-end crosstalk (NEXT) performance has in general about 5dB headroom when used in a Cat. 6 permanent link. • Can be used as cross-connect in a standard phone system today, and will support VoIP applications. FEATURES BENEFITS Innovative design – embedded IDC contacts Non-protruding contacts for improved protection and a long life cycle. Can reduce crosstalk and attenuation for Cat. 6 applications. Can terminate 22-24 AWG (0,4mm-0,8mm) solid or stranded conductors with a maximum overall diameter of AWG 26 to AWG 22 Innovative design – individual pairs are isolated via a unique shielded crosstalk-barrier technology Improves NEXT on Cat. 6 applications with a typical headroom of 7dB. Provides outstanding performance in the same footprint as standard cross-connect RCP 2000 Simple installation – by using the same installation techniques as our standard cross-connect RCP 2000 Utilizes existing design and installation techniques of our RCP 2000. This system mounts in the same footprint as our standard cross-connects RCP 2000. It enables the use of the same back-mount frames. Provides highly repeatable results Proven installation techniques Rear cabling cross-connect saves up to 20% of installation time. Significant transmission improvement beyond 250 MHz because rear cabling provides the pairs remain twisted right up to the IDC contacts Standard cross-connect back-mount frame Quick and easy installation. Installation on our standard cross-connect RCP 2000 metal back-mount frame such as BCCE, RIBE, CIPU, CIPE. Available in 2x18, 2x28, 2x41, 2x65, 2x90, 2x124 ways with 8-pair cross-connect strips Standard footprint – as our standard cross-connect RCP 2000 Exceeds Cat. 6 requirements in the same footprint as standard cross-connect RCP 2000 Standard labeling The new cross-connect RCP Cat. 6 uses the same labels and accessories as our standard cross-connect RCP 2000. Numbered from 1 to 8. A wide variety of label holders offers a freedom of choice for labeling. Different colors of identifiers are available Shielded version for EMI/RFI immunity Shielded cross-connect RCP Cat. 6 have a metallic cover and a metallic wire guide to provide EMI/RFI immunity. Shielded cross-connect RCP Cat. 6 provides EMI/RFI compatibility for harsh environments such as in industrial sites 360° screen contact on an earthing bar (dividing by 4 the amplitude of interference conducted to the screen) Very good protection of cables against radiated interference of up to 150MHz Performance exceeds Cat. 6 component requirements even when jumpers are used This allows for patch-by-exception Cat. 6 standards Cat. 6 disconnection modules for termination of two 4-pair cables Ideal for use in horizontal cable distribution Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ CAT. 6 CROSS-CONNECTS RCP 2000 4.19 SPECIFICATIONS ™ 3M CAT. 6 CROSS-CONNECTS RCP 2000 Electrical performance meets Cat. 6 TIA/EIA-568-B.2-1 and ISO/IEC 11801 ed.2 standards. Electrical characteristics: Environmental and mechanical characteristics: Lead-through resistance: less than 20 mΩ Insertion life minimum: 750 cycles. Insulation resistance under 500V: greater than 100 MΩ Storage temperature: -40°c to +70°c. Dielectric strength: greater than 4000V Operating temperature: -10°c to +60°c. NEXT: 5dB Humidity max: 93% (non condensing) NEXT in a consolidation point: 3dB Plastics components: polycarbonate, V-0 rated according to UL94. RL: 3.5dB Contact material : tinned (minimum 5µm) coated bronze ORDERING INFORMATION CAT. 6 CROSS-CONNECTS RCP 2000 PRODUCT NUMBER DESCRIPTION MIN. ORDER UPC 474491- RCP - Cabling Modules for solid wires (rear cabling) P46920DF Disconnection module, Cat. 6, 8P, blue, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01370 P46840DF Disconnection module, Cat. 6, 8P, yellow, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01364 P46839DF Disconnection module, Cat. 6, 8P, green, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01356 P46809DF Disconnection module, Cat. 6, 8P, red, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01352 P46734DF Disconnection module, Cat. 6, 8P, ivory, with spring, earthing strip and 1 wire guide channel (rear cabling) 80 01342 RCP - Cabling Modules for solid wires (side cabling) P46920CE Disconnection module, Cat. 6, 8P, blue, with 2 wire guide channels (side cabling) 80 01366 P46840CE Disconnection module, Cat. 6, 8P, yellow, with 2 wire guide channels (side cabling) 80 01360 P46839QE Disconnection module, Cat. 6, 8P, green, with 2 wire guide channels (side cabling) 80 01358 P46809CE Disconnection module, Cat. 6, 8P, red, with 2 wire guide channel (side cabling) 80 01344 P46734CE Disconnection module, Cat. 6, 8P, ivory, with 2 wire guide channels (side cabling) 80 01338 RCP - Cabling Modules for multi-stranded wires (rear cabling) 4.20 P46920DA Disconnection module, Cat. 6, 8P, blue, with 1 wire guide channel (rear cabling) 80 01368 P46840DA Disconnection module, Cat. 6, 8P, yellow, with 1 wire guide channel (rear cabling) 80 01362 P46839DA Disconnection module, Cat. 6, 8P, green, with 1 wire guide channel (rear cabling) 80 01354 P46809DA Disconnection module, Cat. 6, 8P, red, with 1 wire guide channel (rear cabling) 80 01350 P46734DA Disconnection module, Cat. 6, 8 P, ivory, with 1 wire guide channel (rear cabling) 80 01340 www.3MTelecommunications.com 800-426-8688 PRODUCT NUMBER/ PACKAGING INFO DESCRIPTION C222909A MIN. ORDER: 10 UPC: 051115-12539 Disconnection Plugs STG-SOR FC disconnection plug-LOT/100-red. C242628A MIN. ORDER: 50 UPC: 051115-12540 Serial Display Plug, 1 per Network Line RCP-serial display plug/1 network line. C222048B MIN. ORDER: 5 UPC: 051115-12541 PCB Type Test Cord STG-2-wire parallel test cord-3 m (9.843 ft.) with banana plugs. C222014B MIN. ORDER: 5 UPC: 051115-12542 PCB Type Test Cord STG-4-wire serial test cord-3 m (9.843 ft.) with banana plugs. C222059A MIN. ORDER: 20 UPC: 051115-12544 Multiple Parallel Test Plug STG-SOR TM10-parallel test plug-10-PR. C222024B MIN. ORDER: 5 UPC: 051115-19364 PCB Type Patch Cord STG-4-wire patch cord-3 m (9.843 ft.). C222025B MIN. ORDER: 5 UPC: 051115-19365 PCB Type Patch Cord STG-2-wire patch cord-3 m (9.843 ft.). C242612A MIN. ORDER: 50 UPC: 051115-19380 PCB Type Patch Cord STG-2-wire cord single-sided PCB-2 m (6.562 ft.). Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ TEST ACCESSORIES STG/BSTG 2000 4.21 3M™ TEST ACCESSORIES STG/BSTG 2000 PRODUCT NUMBER/ PACKAGING INFO DESCRIPTION C242611A MIN. ORDER: 5 UPC: 051115-19397 PCB Type Patch Cord STG-2-wire cord single-sided PCB-1 m (3.281 ft.). MPA025DB MIN. ORDER: 20 UPC: 051115-12549 Test Cord with Plugs STG-4-wire serial cord with terminals 1.5 m (4.921 ft.). MPA025EB MIN. ORDER: 20 UPC: 051115-12550 Test Cord with Plugs STG-4-wire cord with terminals 1.5 m (4.921 ft.). MPA0781A MIN. ORDER: 10 UPC: 051115-12551 Parallel Test Plug for RJ 11 Connector STG-parallel test plug for RJ 11 connector. C222903A MIN. ORDER: 10 UPC: 051115-18051 Label-Holders STG-side label holder with blank tape-LOT/100. C222918A MIN. ORDER: 10 UPC: 051115-19400 Label-Holders STG-lateral label holder with marked stickers-LOT/100. C220673B MIN. ORDER: 20 UPC: 051115-18050 Label-Holder STG-8-PR label holder. To be clipped onto backmount frame. C220674B MIN. ORDER: 20 UPC: 051115-16064 4.22 Label-Holder STG-10-PR label holder. To be clipped onto backmount frame. www.3MTelecommunications.com 800-426-8688 PRODUCT NUMBER/ PACKAGING INFO DESCRIPTION C222950A MIN. ORDER: 1 UPC: 051115-18249 Swivelling Label-Holders (not compatible with patch cords and wire-wrap modules) STG-8-PR hinged label holder-LOT/10. C222951A MIN. ORDER: 1 UPC: 051115-19368 Swivelling Label-Holders (not compatible with patch cords and wire-wrap modules) STG-10-PR hinged label holder-LOT/10. M004725A MIN. ORDER: 20 UPC: 051115-12560 CKD Test Plug STG-serial test plug kit 4 contacts. C222920A MIN. ORDER: 10 UPC: 051115-18037 Marking Accessory, Black STG-black marking cap-LOT/100. C222921A MIN. ORDER: 10 UPC: 051115-18038 Marking Accessory, Gray STG-gray marking cap-LOT/100. C222922A MIN. ORDER: 10 UPC: 051115-18039 Marking Accessory, Red STG-red marking cap-LOT/100. C222923A MIN. ORDER: 10 UPC: 051115-18040 Marking Accessory, Yellow STG-yellow marking cap-LOT/100. C222924A MIN. ORDER: 10 UPC: 051115-18041 Marking Accessory, Blue STG-blue marking cap-LOT/100. Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M™ TEST ACCESSORIES STG/BSTG 2000 4.23 3M™ TEST ACCESSORIES STG/BSTG 2000 PRODUCT NUMBER/ PACKAGING INFO DESCRIPTION C222925A MIN. ORDER: 10 UPC: 051115-18042 Marking Accessory, Green STG-green marking cap-LOT/100. C222917A MIN. ORDER: 10 UPC: 051115-19367 Marking Accessory STG-side numbered marking cap-LOT/100. C234030A MIN. ORDER: 10 UPC: 051115-17945 Multipurpose Insertion Tool STG-SOR OC insertion tool-3MIDC. Inserts and cuts the wire in a single operation. For use with 0,4-0,8 mm (20-26 AWG) diameters. Extractor tool included. 3M™ ACCESSORIES RCP 2000 PRODUCT NUMBER/ PACKAGING INFO DESCRIPTION P44223AA MIN. ORDER: 10 UPC: 051115-18048 1-Way Label Holder - 8 Pair RCP-8-pair 1-way label holder-LOT/100. Attached directly to the mounting profile. Color light gray. For RCP only. P44506AA MIN. ORDER: 1 UPC: 001895-79451 Rotating Label Holder - 8 Pair RCP-8-pair hinged label holder-LOT/10. Attached to the modules it prevents the attachment of patching wires. Color light gray. For RCP only. 4.24 www.3MTelecommunications.com 800-426-8688 To use this free Internet support tool, visit: http://www.3M.com/Telecom. 3M, Armorcast, Crimplok, Dynatel, Fibrlok, ID3000, MS 2, Scotchcast, ScotchCode, Scotchfil, Scotch-Grip, Scotchkote, Scotchlite, Scotchlok, Scotchrap, SLiC, Tartan, VF-45 and Volition are trademarks of 3M Company. Scotch is a registered trademark of 3M Company. All other trademarks used herein are the properties of their respective owners. Many of the products in this catalog are certified as compliant with RoHS standards. For a complete and updated listing of specific RoHS-compliant products, refer to the 3M Communications Technology website at www.3M.com/ROHS. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. 3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Copper Central Office Products — Cross-Connect and Interconnect Blocks and Modules 3M Solutions Tool The solutions tool is designed to show you the breadth of the 3M product line and allow you to drill into specific categories to identify solutions. 4.25 4.26 www.3MTelecommunications.com 800-426-8688