GR6B Round Series
Suspended
Direct/Indirect Illumination
6.00"
1/1 x T8
Construction
Housing: Extruded 6” diameter aluminum body, 6063T5, 0.100” minimum thickness. Available in one piece, unbroken lengths up to 12’ with just
two points of suspension.
Joiner System: Automatic alignment, no loose parts, one tool to tighten two factory installed bolts for a hairline seam. No light leaks.
Ballast: Osram - Sylvania or equal electronic RS ballast with less than 10% THD is standard: ERS.
Mounting and Feed: Aircraft cable is 7x7 stranded stainless steel with machined stainless steel stopper fitting at the top end. Lower end strands
are welded and ground for easy insertion into continuously adjustable cable gripper. Feed cord is straight, white 3/C SVT or SJT #18 AWG.
Rotatable mounting is available for all round fixtures with all mounting methods.
Stems are 3/8” schedule 40 pipe with top swivels. California UBC compliant stems with internal safety cables available (specify SEQ). Direct to
wall adaptor (specify WA), wall bracket mounted (specify WB) and end mounting is also available (specify E).
Electrical
UL listed wiring and components throughout. Housing is completely wired with quick-connect plugs at all mating joints and individually tested. No
fixture disassembly and no field wiring is required to install rows.
All fixtures bear UL & CUL Dry Location labels. Damp Location labels are available. Specify DL in the Options field.
Optical Performance
Reflectors: 87% reflectance white painted aluminum.
Acrylic Prismatic Lens: Specify APL for optional 0.093” acrylic prismatic lens.
Blade Baffle: Specify BBWSG for optional down blade baffle semi gloss white.
Finish
Housing and all exposed components are electrostatically sprayed with high solids aliphatic two component polyurethane to an average thickness
of 2 mils. over acid etching primer. Specify H for high gloss in Paint Finish field. Specify SG for semi gloss.
Standard Features
Manufacturer
Gammalux
No. of Lamps
1/1
Nominal
X-Section
Voltage
6” Diameter
120, 277
Ballast
ERS Elec. <10% THD
UNIV Electronic
DIM Elec. Dimming
(Consult factory)
Mounting Method
C
Cable (Std.)
S
Swivel stem
SEQ CA Earthquake
Stems/fittings
WA Wall Adaptor
WB Wall bracket
E End mount
Paint Color
W-
White
(Consult color chart
for other standard
colors)
CCM- Custom Color Match
Paint Finish
H - High gloss
SG - Semi
gloss
GR6B – 1/132T8 – 120V – ERS – 12' – C24” – OP/BB – WH – XX
Lamp Type
T8
Direction
Bidirectional
Nominal Lamp Watts
32 (4' - T8)
Cross Section Shape
Round
G A M M A L U X
®
Fixture Length
4' to 12’ units
available. For multiple
units coupled end to
end specify total
length followed by
ROW. For layouts in
pattern specify PTN
and attach drawing.
Suspension Length
24” (Ceiling to top of
fixture) or cut to order
Top Shielding
OP - Open
APL - Acrylic Prismatic Lens
Options
GLR - Fuse w/ holder
BPE - Battery Pack Em. kit
DL - UL Damp Label
2CKT - Dual circuiting
EMERG - Emergency Ckt.
Bottom Shielding
BB - Blade Baffle Semi Gloss White
APL - Acrylic Prismatic Lens
248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 800.356.3275 Fax 909.599.5288
E-mail: info@gammalux.com http://www.gammalux.com
Round
GR6B-1/132T8
For individual and continuous rows of luminaires with cable or stem
suspended mounting.
Mounting Dimensions
4'-0 1/2" O.A.
1/4"
8'-0 1/2" O.A.
4'-0" O.C.
1/4"
1/4"
8'-0" O.C.
1/4"
12'-0 1/2" O.A.
1/4"
12'-0" O.C.
1/4"
16'-0 1/2" O.A.
1/4"
8'-0" O.C.
8'-0" O.C.
8'-0 1/4"
8'-0 1/4"
1/4"
24'-0 1/2" O.A.
1/4"
12'-0" O.C.
12'-0" O.C.
12'-0 1/4"
12'-0 1/4"
1/4"
G A M M A L U X®
Round
GR6B-1/132T8
Wall Bracket
Wall Adaptor
6.00"
*
.125"
6.00"
* ROTATABLE
ROTATABLE
3"
MTG. POINT
CL
CL 3.125"
WALL LINE
BBWSG
4.500"
SQ.
WALL LINE
BBWSG
WALL BRACKET
MTG. BRACKET
Wall Adaptor
(Specify WA)
Wall Bracket
(Specify WB)
The mounting spacing shown here applies to all wall adaptor and wall bracket GR6B luminaires regardless of lamping.
8'-0 1/2" O.A.
4'-0 1/2" O.A.
3 1/4"
3'-6" O.C.
3 1/4"
3 1/4"
7'-6" O.C.
3 1/4"
12'-0 1/2" O.A.
3 1/4"
5'-6" O.C.
3 1/4"
6'-0" O.C.
16'-0 1/2" O.A.
3 1/4"
7'-6" O.C.
8'-0" O.C.
8'-0 1/4"
3 1/4"
8'-0 1/4"
24'-0 1/2" O.A.
3 1/4"
5'-6" O.C.
6'-0" O.C.
6'-0" O.C.
12'-0 1/4"
6'-0" O.C.
3 1/4"
12'-0 1/4"
* Rotatable Luminaires
All rotatable round series luminaires must be mounted with a rotor element. Rotatable fixtures can have wall bracket,
cable, stem, end or wall mounting. Each rotor element adds 1.5” to the overall length of the luminaire.
4'-3 1/2" O.A.
1"
8'-3 1/2" O.A.
4'-1 1/2" O.C.
1"
1"
8'-1 1/2" O.C.
1"
12'-3 1/2" O.A.
1"
1"
12'-1 1/2" O.C.
16'- 5" O.A.
1"
8'-1 1/2" O.C.
8'-1 1/2 " O.C.
8'-3 1/4"
1"
8'-1 3/4"
24'- 5" O.A.
1"
12'-1 1/2" O.C.
12'-0 1/4"
12'-1 1/2 " O.C.
1"
12'-1 3/4"
G A M M A L U X®