Parabolic Lighting
Attune’s Environment
Attune introduces a controlled amount of brightness into the higher viewing angles of the environment. This bathes the space in even
illumination to create a very pleasant atmosphere without uncomfortable glare. This controlled light output creates excellent lighting for vertical surfaces by illuminating the upper quadrants of the surrounding walls to eliminate the cave effect created by parabolic luminaires.
ordering information*
SAMPLE CATALOG NUMBER: 2ATNG232-D-120-1/2-EB
–
WIDTH
– 1’
1
2 – 2’
DISTRIBUTION
N – Standard
(except 1x4)
W – Wide
(Batwing)**
**Not available with
CF40/CF50/CF55
AIR FUNCTION
LAMP TYPE/WATTAGE
Blank – Static
A – Air supply/return
14 – 14wT5 (22”)
17 – 17wT8 (24”)
24HO – 24wT5HO (22”)
28 – 28wT5 (46”)
32 – 32wT8 (48”)
54HO – 54wT5HO (46”)
CF40 – 40wTT5 (24”)
CF50 – 50wTT5 (24”)
CF55 – 55wTT5 (24”)
–
–
–
BALLAST
CONFIG.
VOLTAGE
120
277
347
UNV – Universal
voltage,
120-277
volt
1/1 – One
1-lamp
ballast
1/2 – One
2-lamp
ballast
–
BALLAST TYPE
EB95 – T5 Electronic ballast, .95
ballast
factor
FAMILY
CEILING TYPE
NO. OF LAMPS DIFFUSERS
EB115 – T5 Electronic ballast, 1.15 AT – Attune
G – Grid
D – Diffuse
1 (1x4 only)
ballast factor
ATCP – Chicago
F – Flange
DO – Diffuse w/overlay EBSD95 – T5 Electronic step dimming 2
Plenum Model Z – Z Spline/Modular
WO – White Radial
ballast, .95 ballast factor
T – Screw Slot
Louver w/overlay EBSD115 – T5 Electronic step dimming PMW – Round Perf. w/
ballast, 1.15 ballast factor white overlay
EBD – T5/T5HO/T8/CF electronic dimming ballast
SMW – Slotted (Linear)
EB – T5/T5HO/T8/CF electronic
Perf. w/white over*For sconce ordering
ballast, std. ballast factor
*Factory installed. 2x2 models may require top mounted ballast box.
lay
information please
EBL – T8 Electronic ballast, low
ballast
factor
see spec. sheet
EBH – T8 Electronic ballast, hi
0155-AR.
ballast factor
EB10I – T8 Electronic ballast,
<10% THD, instant start
EB10R – T8 Electronic ballast,
<10% THD, rapid start
EBSD – T8 Electronic step dimming ballast
unifying light and life
OPTIONS
CM – Canadian Market
CC – Custom Color
F1 – 3/8” flex, 3 wire 18 gauge
F2 – 3/8” flex, 4 wire 18 gauge
E1 – DEB-1 emerg. ballast*, T8 lamps, 350-450 lumens
E7 – DEB-7 emerg. ballast*, T8 lamps, 600-700 lumens
E5 – DEB-5 emerg. ballast*, T8 lamps 1100-1400 lumens
E7LP – DEB-7LP emerg. ballast* T5/T5HO, 430-700 lumens
E6LP – DEB-6LP emerg. ballast*, T5/T5HO lamps,
750-1325 lumens
GLR# – Fusing, fast blow (# = number of ballasts)
LPT730 – Installed T8 lamps, 70+ CRI, 3000K
LPT735 – Installed T8 lamps, 70+ CRI, 3500K
LPT741 – Installed T8 lamps, 70+ CRI, 4100K
LPT830HL – Installed T8 hi lumen lamps, 80+ CRI, 3000K
LPT835HL – Installed T8 hi lumen lamps, 80+ CRI, 3500K
LPT841HL – Installed T8 hi lumen lamps, 80+ CRI, 4100K
LPT830 – Installed T8/T5/T5HO lamps, 80+ CRI, 3000K
LPT835 – Installed T8/T5/T5HO lamps, 80+ CRI, 3500K
LPT841 – Installed T8/T5/T5HO lamps, 80+ CRI, 4100K
PAF – Housing painted after fabrication
© 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
148 05/13 Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
the concept
diffuse
the choices
Design a FAMILY of products to provide:
• 1x4, 2x2, or 2x4 housings
• A stylized architectural package
• Grid, Flange, Screw Slot, or Z-Spline ceiling models
• Standard or Wide (batwing) photometric distributions
• Outstanding photometric performance
• T8, T5, T5HO, or CF lamps
• Limitless flexibility to meet the demands of any installation
Create comfortable, highly efficient illumination
round perf
Unify an overall theme
• Fixed output, step dimming, or continuous dimming
ballasts with multiple ballast factors
• Diffuse, round perf., slotted perf., or radial louver
shielding
the elements
• Air handling models are available
High Quality Architectural Aesthetics
• New York City or Chicago Plenum models available
slotted perf
• Establish architectural impact with a highly stylized profile
• Matching sconce unit
and undulating detail.
• Provide visual appeal while being unobtrusive.
• Heighten the perceived volume of the space - see the
lighting rather than the luminaires.
• Create a natural organic effect via smooth luminance
gradients.
• Tailor the visual impact to the space via multiple
shielding options.
radial louver
“unquestionably architectural and can
add detail or disappear, depending on
the complexity of the space . . . ”
air
sconce
Outstanding Performance
• Create controlled distributions to provide excellent
uniformity and visual comfort.
unifying light & life
• Provide very high electrical system efficacy - models
available up to 102 LPW.
• Provide very high luminaire efficiency - models available in
• The Standard photometric curve provides a spacing/
excess of 90% efficiency.
mounting height suitable for many applications and layouts.
• Facilitate energy reductions of 1/3 or more
compared to conventional recessed lighting.
Remarkable Flexibility
• Provide an Attune model for every application.
• Tailor the appearance, brightness and light output to
your specific environments, such as open offices,
corridors, private offices, conference spaces, break rooms,
• The Wide distribution features a batwing curve with a much
and even restrooms.
wider spacing/mounting height to improve uniformity, allow
Easy Installation & Maintenance
wider luminaire spacing, and introduce a controlled amount of
• Reverse the trend of making recessed architectural
products difficult to install and maintain.
• Provide discrete models for multiple ceiling types
• Allow quick ballast and lamp access from below without
tools or non-captive parts
light into the higher viewing angles to
“Attune features light output nearly
unheard of for a product with no
direct lamp view . . . ”
create soft, natural brightness comparable to daylighting.
the concept
diffuse
the choices
Design a FAMILY of products to provide:
• 1x4, 2x2, or 2x4 housings
• A stylized architectural package
• Grid, Flange, Screw Slot, or Z-Spline ceiling models
• Standard or Wide (batwing) photometric distributions
• Outstanding photometric performance
• T8, T5, T5HO, or CF lamps
• Limitless flexibility to meet the demands of any installation
Create comfortable, highly efficient illumination
round perf
Unify an overall theme
• Fixed output, step dimming, or continuous dimming
ballasts with multiple ballast factors
• Diffuse, round perf., slotted perf., or radial louver
shielding
the elements
• Air handling models are available
High Quality Architectural Aesthetics
• New York City or Chicago Plenum models available
slotted perf
• Establish architectural impact with a highly stylized profile
• Matching sconce unit
and undulating detail.
• Provide visual appeal while being unobtrusive.
• Heighten the perceived volume of the space - see the
lighting rather than the luminaires.
• Create a natural organic effect via smooth luminance
gradients.
• Tailor the visual impact to the space via multiple
shielding options.
radial louver
“unquestionably architectural and can
add detail or disappear, depending on
the complexity of the space . . . ”
air
sconce
Outstanding Performance
• Create controlled distributions to provide excellent
uniformity and visual comfort.
unifying light & life
• Provide very high electrical system efficacy - models
available up to 102 LPW.
• Provide very high luminaire efficiency - models available in
• The Standard photometric curve provides a spacing/
excess of 90% efficiency.
mounting height suitable for many applications and layouts.
• Facilitate energy reductions of 1/3 or more
compared to conventional recessed lighting.
Remarkable Flexibility
• Provide an Attune model for every application.
• Tailor the appearance, brightness and light output to
your specific environments, such as open offices,
corridors, private offices, conference spaces, break rooms,
• The Wide distribution features a batwing curve with a much
and even restrooms.
wider spacing/mounting height to improve uniformity, allow
Easy Installation & Maintenance
wider luminaire spacing, and introduce a controlled amount of
• Reverse the trend of making recessed architectural
products difficult to install and maintain.
• Provide discrete models for multiple ceiling types
• Allow quick ballast and lamp access from below without
tools or non-captive parts
light into the higher viewing angles to
“Attune features light output nearly
unheard of for a product with no
direct lamp view . . . ”
create soft, natural brightness comparable to daylighting.
Parabolic Lighting
Attune’s Environment
Attune introduces a controlled amount of brightness into the higher viewing angles of the environment. This bathes the space in even
illumination to create a very pleasant atmosphere without uncomfortable glare. This controlled light output creates excellent lighting for vertical surfaces by illuminating the upper quadrants of the surrounding walls to eliminate the cave effect created by parabolic luminaires.
ordering information*
SAMPLE CATALOG NUMBER: 2ATNG232-D-120-1/2-EB
–
WIDTH
– 1’
1
2 – 2’
DISTRIBUTION
N – Standard
(except 1x4)
W – Wide
(Batwing)**
**Not available with
CF40/CF50/CF55
AIR FUNCTION
LAMP TYPE/WATTAGE
Blank – Static
A – Air supply/return
14 – 14wT5 (22”)
17 – 17wT8 (24”)
24HO – 24wT5HO (22”)
28 – 28wT5 (46”)
32 – 32wT8 (48”)
54HO – 54wT5HO (46”)
CF40 – 40wTT5 (24”)
CF50 – 50wTT5 (24”)
CF55 – 55wTT5 (24”)
–
–
–
BALLAST
CONFIG.
VOLTAGE
120
277
347
UNV – Universal
voltage,
120-277
volt
1/1 – One
1-lamp
ballast
1/2 – One
2-lamp
ballast
–
BALLAST TYPE
EB95 – T5 Electronic ballast, .95
ballast
factor
FAMILY
CEILING TYPE
NO. OF LAMPS DIFFUSERS
EB115 – T5 Electronic ballast, 1.15 AT – Attune
G – Grid
D – Diffuse
1 (1x4 only)
ballast factor
ATCP – Chicago
F – Flange
DO – Diffuse w/overlay EBSD95 – T5 Electronic step dimming 2
Plenum Model Z – Z Spline/Modular
WO – White Radial
ballast, .95 ballast factor
T – Screw Slot
Louver w/overlay EBSD115 – T5 Electronic step dimming PMW – Round Perf. w/
ballast, 1.15 ballast factor white overlay
EBD – T5/T5HO/T8/CF electronic dimming ballast
SMW – Slotted (Linear)
EB – T5/T5HO/T8/CF electronic
Perf. w/white over*For sconce ordering
ballast, std. ballast factor
*Factory installed. 2x2 models may require top mounted ballast box.
lay
information please
EBL – T8 Electronic ballast, low
ballast
factor
see spec. sheet
EBH – T8 Electronic ballast, hi
0155-AR.
ballast factor
EB10I – T8 Electronic ballast,
<10% THD, instant start
EB10R – T8 Electronic ballast,
<10% THD, rapid start
EBSD – T8 Electronic step dimming ballast
unifying light and life
OPTIONS
CM – Canadian Market
CC – Custom Color
F1 – 3/8” flex, 3 wire 18 gauge
F2 – 3/8” flex, 4 wire 18 gauge
E1 – DEB-1 emerg. ballast*, T8 lamps, 350-450 lumens
E7 – DEB-7 emerg. ballast*, T8 lamps, 600-700 lumens
E5 – DEB-5 emerg. ballast*, T8 lamps 1100-1400 lumens
E7LP – DEB-7LP emerg. ballast* T5/T5HO, 430-700 lumens
E6LP – DEB-6LP emerg. ballast*, T5/T5HO lamps,
750-1325 lumens
GLR# – Fusing, fast blow (# = number of ballasts)
LPT730 – Installed T8 lamps, 70+ CRI, 3000K
LPT735 – Installed T8 lamps, 70+ CRI, 3500K
LPT741 – Installed T8 lamps, 70+ CRI, 4100K
LPT830HL – Installed T8 hi lumen lamps, 80+ CRI, 3000K
LPT835HL – Installed T8 hi lumen lamps, 80+ CRI, 3500K
LPT841HL – Installed T8 hi lumen lamps, 80+ CRI, 4100K
LPT830 – Installed T8/T5/T5HO lamps, 80+ CRI, 3000K
LPT835 – Installed T8/T5/T5HO lamps, 80+ CRI, 3500K
LPT841 – Installed T8/T5/T5HO lamps, 80+ CRI, 4100K
PAF – Housing painted after fabrication
© 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
148 05/13 Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008