Welcome to
light up your life
User Equipment
The equipment provided by EATEL
delivers LightWave TV service to your
home or business and connects to most
entertainment devices.
Set-Top Box Safety Information.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Residential Gateway Unit (RGU).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Set-Top Box Front Panel Features.. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Set-Top Box Back Panel Features.. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Universal Remote Control.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4
User Equipment
Set-Top Box Safety Information
Refer all servicing to qualified service personnel. Servicing is required
Ground the Product
when the equipment has been damaged in any way, such as a power-
WARNING: Avoid electric shock and fire hazard! If this
supply cord or plug is damaged, liquid has been spilled or objects
product connects to cable wiring, be sure the wiring is
have fallen into the equipment, the equipment has been exposed to
grounded (earthed). Grounding provides some protection
rain or moisture, does not operate normally, or has been dropped.
against voltage surges and built-up static charges.
Power Source Warning
Protect the Equipment from Lightning
A label on this product indicates the correct power source for this
product. Operate this product only from an electrical outlet with the
In addition to disconnecting the AC power from the wall outlet,
disconnect the signal inputs.
voltage and frequency indicated on the product label. If you are
uncertain of the type of power supply to your home or business,
Verify the Power Source from the On/Off Power Light
consult your local power company.
When the on/off power light is not illuminated, the equipment may still
The AC inlet on the unit must remain accessible and operable
at all times.
be connected to the power source. The light may go out when the
equipment is turned off, regardless of whether it is still plugged into
an AC power source.
Set-Top Box Safety Information
5
Eliminate AC Mains Overloads
WARNING: Avoid electric shock and fire hazard!
Protect from Exposure to Moisture and
Foreign Objects
Do not overload AC mains, outlets, extension cords,
WARNING: Avoid electric shock and fire hazard!
or integral convenience receptacles. For products that
Do not expose this equipment to dripping or splashing
requires battery power or other power sources to operate them,
refer to the operating instructions for those products.
liquids, rain or moisture. Objects filled with liquids, such
as vases, should not be placed on this equipment.
Provide Ventilation and Select a Location
WARNING: Avoid electric shock and fire hazard!
• Remove all packaging material before applying power to
Unplug this equipment before cleaning. Do not use
the equipment.
• Do not place this equipment on a bed, sofa, rug, or similar surface.
a liquid cleaner or an aerosol cleaner. Do not use a
magnetic/static cleaning device (dust remover) to clean this product.
• Do not install this equipment in an enclosure, such as a bookcase
or rack, unless the installation provides proper ventilation.
WARNING: Avoid electric shock and fire hazard!
Never push objects through the openings in this
• Do not place entertainment devices (such as VCRs or DVDs),
lamps, books, vases with liquid, or other objects on top of
this equipment.
• Do not block ventilation openings.
6
Set-Top Box Safety Information
equipment. Foreign objects can cause electrical
shorts that can result in electric shock or fire.
WARNING: Avoid electric shock and fire hazard! Do not
open the cover of the equipment. Opening or removing
the cover may expose you to dangerous voltages. If
you open the cover, your warranty will be voided. This equipment
Check Equipment Safety
Upon completion of any service or repairs to this equipment,
the service technician must perform safety checks to determine
that this equipment is in proper operating condition.
contains no user-serviceable parts. Refer all servicing to qualified
service personnel. Servicing is required when the equipment has
been damaged in any way, such as a power-supply cord or plug
Protect the Equipment When Moving It
is damaged, liquid has been spilled or objects have fallen into the
Always disconnect the power source when moving the product
equipment, the equipment has been exposed to rain or moisture,
or connecting or disconnecting cables.
does not operate normally, or has been dropped.
Set-Top Box Safety Information
7
Residential Gateway Unit (RGU)
1
8
2
9
3
4
10
5
6
7
Note: This Illustration may vary from the actual product.
8
Residential Gateway Unit (RGU)
11
1.Not used.
2. Connects to the local Ethernet network, if applicable.
3. Not used.
4. Connects to the Internet.
5. Connects to the TV service.
6. Resets the unit. (Do not press unless instructed by customer support).
7. Connects to the power source.
8.Indicates the power status.
9. Indicates the RGU link status.
10. Indicates the Internet link status.
11. Indicates the network connection status.
Residential Gateway Unit (RGU)
9
Cisco ISB7000 Series – Front Panel
1
2
3
4
Note: This illustration may vary from the actual product.
10
Set-Top Box Front Panel Features
5
6
7
8
9
10
1.Power – Turns the set-top on or places it in standby. To restart
the set-top, press and hold the POWER button for 10 seconds.
The LED is green.
CAUTION:
Your set-top may be equipped with a hard disk drive
to store programs that you record and to allow you to rewind
2.Model Number – Identifies the model number of your set-top
as ISB7000 or ISB7050.
and pause live TV. Any time the set-top is powered on (power
3. Link – Indicates network link status. The LED is green.
LED is illuminated) the hard disk drive is in use.
4.HD – Indicates the set-top is set to a resolution of 720p or 1080i.
The LED is blue.
If you need to move the set-top, complete the following steps
5. Record – Indicates that a recording is in progress. The LED is red.
LED is illuminated) or a recording is in progress (the record
to allow the hard disk drive to shut down properly. First, make
sure that no recording is in progress (record LED is off). Then,
6.IR Sensor – Receives the infrared signal from the remote control.
The sensor is behind the front panel.
turn off power by pressing the Power key. Finally, unplug the
7. Menu – Accesses the on-screen menu.
(stop). At this point the unit can be moved safely.
8.Arrow Keys – Accesses on-screen services (such as the
on-screen guide, Video On Demand, or Pay Per View) and
navigates menus.
You should handle this product with the same level of care
9. OK – Selects the current item.
a hard disk drive, such as a laptop computer or other hard
unit and wait 10 seconds for the hard disk drive to spin down
you would use when handling other electronics containing
disk drive-equipped devices.
10. USB Port – USB connector. (optional)
Set-Top Box Front Panel Features
11
Cisco ISB7000 Series – Back Panel
1
2
Note: This illustration may vary from the actual product.
12
Set-Top Box Back Panel Features
3
4
5
6
7
8
9
10
11
12
1.To Wall (Video In) or WPS (not shown) – Connects the set-top
to in-house coaxial wiring, if applicable.
2. To TV (Video Out) – Connects to the TV.
3.Network – Connects to the Ethernet (CAT-5) network at your
home, if applicable.
8.Audio Out (L/R) – Connects RCA-type cables to Audio Out to
send analog audio signals (left and right) to a TV with stereo
inputs or to a stereo amplifier. Note: Two sets of audio out
connectors are provided. Typically, one set of outputs is
connected to the TV, and the other set is used to connect
to a home theater system, DVD recorder, or VCR.
9.Optical – Connects an optical cable to send a digital audio
signal to a surround-sound set-top or other digital audio device.
4. eSATA Port – eSATA connector. (optional)
5.YPbPr – Connects the set-top to the component video input
(YPbPr) on the HDTV.
6.S-Video – Connects an S-Video cable to send an S-Video
signal to your TV, VCR, or DVD recorder. This signal is standarddefinition but higher quality than other standard-definition TV
connections.
7.Video Out – Connects to composite input on your HDTV or SDTV.
Note: Two video output connectors are provided. Typically, one
output is connected to the TV, and the other output is used to
connect to a home theater system, DVD recorder, or VCR.
10.HDMI – Connects an HDTV HDMI™ (High-Definition Multimedia
Interface) cable from the HDTV to the HDMI port. HDMI supports
both digital audio and video.
11.USB Port – Connects to external USB equipment approved
by EATEL.
12.Power – Connects the DC output of the AC power adapter
(provided) to deliver power to the set-top. Use only the AC
power adapter provided with the set-top.
Set-Top Box Back Panel Features
13
Universal Remote Control
Device Control
Turns devices on or off.
Enables set-top mode functions.
DVR, VOD, DVD, VCR Control
Notes:
• In STB mode, these keys control DVR and VOD functions.
• In DVD and AUX modes, these keys may control your DVD or
VCR depending on how you have programmed the remote.
Enables TV mode functions.
Records the selected program.
Enables DVD mode functions.
Stops DVD, VCR, VOD, or DVR content.
Enables AUX mode functions.
Pauses DVD, VCR, VOD, or DVR content.
Plays DVD, VCR, VOD, or DVR content.
Scrolls through available TV or video input sources.
Rewinds or fast forwards through DVR or VOD content.
Skips backward or forward through DVR or VOD content.
14
Universal Remote Control
Viewing and Browsing Control
Accesses the Video On Demand menu.
Returns to last channel viewed
Selects the next channel, up or down, when watching TV. Moves
up or down one page in the IPG and in some menu screens.
Returns to previous screen.
Accesses the Menu Screen.
Sound Control
Note: These keys are assigned to the TV when the
TV mode key is programmed with a valid code.
Accesses the DVR list of recordings.
Adjusts volume.
Enables Interactive mode.
Mutes sound.
Moves through selections.
Selects and deselects screen items.
Numeric Keys
Returns from menu screens and to viewing TV or video.
Enters channel numbers, text, and remote codes.
Also use to enter your parental control PIN.
Selects options in menus and the program guide.
Displays text information about the selected programs or closes the IPG.
Clears text and numbers in text fields.
Enters and saves (stores) and entry. Sizes the picture
for some high-definition television (HDTV) models.
Universal Remote Control
15