SR
Dimensions
3”
24”
center-to-center
of t-bar
453
302
377
226
75
151
0
75
226
151
302
90.0
85.0
85.0
80.0
80.0
75.0
75.0
70.0
70.0
65.0
65.0
60.0
60.0
55.0
55.0
50.0
50.0
45.0
45.0
40.0
40.0
SR
4’
2-lamp T5HO
Shallow curved lens
+ HTLO insert
Fixture Efficiency: 81.2%
shown with shallow
curved 7” lens
35.0
35.0
30.0
54
377
90.0
453
Polar Char t
RECESSED
DIRECT
25.0
20.0
15.0
10.0
5.0
0.0
5.0
10.0
15.0
20.0
T5
25.0
30.0
SR
ULTRA SHALLOW RECESSED
Construction
22GA steel is standard. 20GA optional for NYC code.
Project
Type
Quantity
E- SR
Finish:
W
Dimension
Individual fixtures - Luminaires are available as individual 2’
and 4’ nominal lengths.
Satin White
Dimension:
2
4
Mounting
T-Bar - Available for the following t-bar ceilings: 9/16” or 15/16”
standard flat or 9/16” slot.
Nominal 2’ long x 24” wide
Nominal 4’ long x 24” wide
Lamping:
2
Shielding
(2) lamps in cross section
See SRL for LED version
7” shallow curved lens - Clear acrylic extruded lens with slidein diffuser options along bottom and sides. Hinged for easy
lamp/ballast access. Diffuser options as follows:
Ballast:
S5
H5
DS
DH
Opal - Creates soft illumination from below (65%
transmissive).
LexEfx™ - Circular, perforated, screen-printed pattern on
opal acrylic (60% transmissive).
Standard T5
High output T5HO
Dimming standard T5 (specify type/voltage)
Dimming high output T5HO (specify type/voltage)
Shielding:
HTLO™ - High transmission lamp obfuscating diffuser
maintains high light output while creating an even glow (93%
transmissive).
O
L
H
RL
RLF
5” radial clear - Proprietary radial, linear-patterned, clear
acrylic lens.
7” shallow curved lens - opal acrylic
7” shallow curved lens - LexEfx™
7” shallow curved lens - HTLO™
5” radial lens - clear acrylic
5” radial lens - frosted acrylic
Voltage:
5” radial frosted - Proprietary radial, linear-patterned, frosted
acrylic lens.
U
H
1
2
3
4
1B
2B
Ballast
T5/T5HO - Universal 120-227V, low profile electronic, high
power factor, program start, sound rating A, inherent thermal
protection, UL listed Class P, <10% THD.
Dimming or emergency ballast: specify manufacturer, model/
series & voltage. ISL-540 not available on this fixture.
Universal 120V - 277V (factory standard)
Universal 347V - 480V
120V
277V
347V
480V
Emergency ballast 120V
Emergency ballast 277V
Reflector:
Finish
Electrostatically applied post powder coat finish satin white.
S
Listing
UL/CUL. Damp location.
Satin white powdercoat reflector
Recessed
Distribution
Direct.
Mounting:
9F
9S
1F
9/16” flat t-bar
9/16” slot t-bar
15/16” flat t-bar
Options:
3728 Maritime Way Oceanside, CA 92056
760.727.7675 | www.alumen8e.com
V.8.2013
F
M
N
CP
In-line fusing
Multi-circuit wiring
New York City Code 20GA housing
Chicago Plenum Code housing
55