PCB - Wago
advertisement
PCB Terminal Blocks – Product Overview – WAGO PCB Connection Philosophy With a pre-programmed clamping force that adjusts automatically to the wire size (proportional clamping), the WAGO spring pressure clamping technology - in contrast to screw clamp technology - guarantees a reliable connection regardless of the installer‘s experience. The result is a connection that is vibration-proof, thermal cycling-resistant, corrosion-resistant, maintenance-free, and up to 50% faster than other temination methods. The Complete Product Range at a Glance Pin Spacings 2.5 mm - 20 mm (0.098 - 0.787 in) Conductor Sizes and Types 28 - 6 AWG, solid, stranded, fine-stranded and ferruled copper conductors Available Styles Modular terminal blocks, terminal strips, terminal blocks, single deck, double deck, triple deck, or quadruple deck terminal strips, high-current, combination terminal blocks, disconnect terminal blocks for test and measurement, fuse terminal blocks, modular terminal blocks with jumpering option Actuation Options Direct actuation with screwdriver, straight push button, angled push button, finger operated lever, locking slide Connection to PCB Through-hole technology (THT), Through-hole reflow (THR), PressIn technology, Surface-mount technology (SMT) Conductor Entry Angles 0°, 30°, 40°, 45°, 90° Termination Technology ° Universal connection technology with over 30 years of proven reliability for solid, stranded and fine-stranded conductors. Handling: Open clamping unit, insert the conductor, release clamp – done! CAGE CLAMP® “PECIAL” universal connection technology that combines the beneits of the classic CAGE CLAMP® with the advantages of pushwire connection. Handling: For stranded conductors, open clamping unit, insert the conductor, release clamp – done! Terminate both solid and ferruled conductors by simply pushing them in – no operating tool needed. $ PUSHWIRE® connection for solid conductors Handling: Tool-free, twist-free terminations for solid conductors – simply push into unit. RoHS compliant Printed Circuit Board Connection Methods Through-Hole Technology WAGO PCB mount terminal blocks can be soldered to the board manually or via automated wave solder process. THT is the most widely accepted technology for connecting the terminal block to the PCB. Surface Mount Technology Surface Mount Technology (SMT) means soldering electronic components directly onto PCB surface pads without drilling holes. The basic SMT process consists of applying solder paste to the PCB via solder dispensing equipment, screen or stencil printing. The surface mount components are then soldered to the board in infrared, convection, or vapor phase ovens. Through-Hole Reflow WAGO (THR) terminal blocks are made of a special plastic to withstand the high temperatures experienced in the reflow solder process. THR terminal blocks can be attached to the printed circuit board via the same reflow process used to attach SMT components, offering tremendous time and cost savings. Press-In Technology Allows direct connection of WAGO terminal block pins to the printed circuit board without the use of solder. This technology is particularly effective when all other components are pre-applied to the PCB using surface mount technology (SMT). Also great for prototyping. Colors: black, dark gray, gray, light gray, white, red, orange, yellow, green, brown, blue, violet The availability of these, and other colors, depends on series and quantity required. PCB Terminal Blocks 2.5 mm, 2.54 mm 3 mm 233 Series 0.08 – 0.5 mm2 / AWG 28 – 20 233-105 739 Series 0.14 - 0.34 mm2 / AWG 26 - 22 2059-302 218 Series 2060 Series – Surface-Mount 739 Series $ ° CLAMP® 3.96/4 mm 3.5 mm, 3.81 mm 2059 Series - Surface Mount ° CLAMP® CAGE CLAMP® ° CLAMP® 0.08 – 1.5 mm2/ AWG 28 – 14 739-305 0.08 – 1.5 mm2/ AWG 28 – 14 739-312/100-000 0.2 – 0.75 mm2/ AWG 24 – 18 2060-402 805 Series 805 Series 2060 Series – Through-Hole 3.5 THR THR 3.5 CAGE CLAMP® ° CLAMP® 0.08 – 0.5 mm2 / AWG 28 – 20 218-104 0.2 – 1.5 mm2/ AWG 24 – 16 805-106 0.2 – 1.5 mm2/ AWG 24 – 16 805-306/200-604 218 Series 250 Series 250 Series THR 3.5 CAGE CLAMP® CAGE CLAMP® 0.2 – 0.75 mm2/ AWG 24 – 18 2060-1402 THR 3.5 CAGE CLAMP® ° CLAMP® CAGE CLAMP® 0.08 – 0.5 mm / AWG 28 – 20 218-104/000-604 0.2 – 1.5 mm / AWG 24 – 16 250-105 0.2 – 1.5 mm / AWG 24 – 16 250-206/353-604 233 Series 235 Series 235 Series 2 2 3.81 CAGE CLAMP® ° CLAMP® 2 $ 0.08 – 0.5 mm2 / AWG 28 – 20 233-205 0.5 – 1.5 mm2/ AWG 20 – 16 235-105 0.5 – 1.5 mm2/ AWG 20 – 16 235-105/330-000 ”sol.“ 234 Series 744 Series 735 Series 3.5 0.08 – 0.5 mm / AWG 28 – 20 234-208 0.5 – 1.5 mm2/ AWG 20 – 16 744-204 ”sol.“ 250 Series 251 Series CAGE CLAMP® 0.2 – 0.5 mm2 / AWG 24 – 20 250-412 250 Series 0.5 – 1.5 mm2/ AWG 20 – 16 235-205 3.81 $ $ ° CLAMP® 2 235 Series 3.81 0.5 – 1.5 mm2/ AWG 20 – 16 735-127 ”sol.“ 3.5 " $ 0.5–1.0/1.5mm2/AWG 20–18/16 251-107 and 251-303 ”sol.“ THR 2.5 CAGE CLAMP® 0.2 – 0.5 mm2 / AWG 24 – 20 250-406/350-604 2080 Series 2.5 $ 2x 0.2 – 0.5 mm2 / AWG 24 – 20 2080-506 4 ”sol.“ Ex e II approval Press-in technology THR Through-hole reflow soldering Only available in this pin spacing – Product Overview Sorted by Pin Spacing – 4 236 Series 4 5 mm, 5.08 mm 236 Series THR 745 Series 5 5 ° CLAMP® ° CLAMP® 0.08 – 2.5 mm2/ AWG 28 – 12* 236-406/334-604 0.08 – 4 mm2/ AWG 28 – 12 745-3104 739 Series 739 Series 740 Series ° CLAMP® 0.5 – 1.5 mm2/ AWG 22 – 16 2061-602 5 ° CLAMP® 0.08 – 2.5 mm / AWG 28 – 12* 739-112/100-000 0.08 – 2.5 mm / AWG 28 – 12* 740-105 Disconnect terminal blocks for test and measurement, 742 Series Terminal blocks with jumper slot, 742 Series Fuse terminal blocks, 742 Series ° CLAMP® 2 ° CLAMP® 0.08 – 2.5 mm / AWG 28 – 12* 742-121 0.08 – 2.5 mm / AWG 28 – 12* 742-116 736 Series 737 Series 738 Series 2 ° CLAMP® ° CLAMP® 0.08 – 2.5 mm2/ AWG 28 – 12* 738-108 255 Series 256 Series 257 Series ° CLAMP® 4 ° CLAMP® ° CLAMP® 0.08 – 2.5 mm / AWG 28 – 12* 255-405 0.08 – 2.5 mm / AWG 28 – 12* 256-405 0.08 – 2.5 mm / AWG 28 – 12* 257-405 235 Series 250 Series 250 Series 2 CAGE CLAMP® 2 5 CAGE CLAMP® 2 x 0.2–1.5 mm2 / 2 x AWG 24–16 816-105 ° CLAMP® 0.08 – 2.5 mm2/ AWG 28 – 12* 737-106 4 CAGE CLAMP® 2 0.08 – 2.5 mm2/ AWG 28 – 12* 736-106 4 5 ° CLAMP® 0.08 – 2.5 mm / AWG 28 – 12* 742-101 2 816 Series ° CLAMP® 0.08 – 2.5 mm / AWG 28 – 12* 739-112 2 CAGE CLAMP® ° CLAMP® 0.08 – 2.5 mm2/ AWG 28 – 12* 236-404 2 6 mm 2061 Series – Surface-Mount 2 5 804 Series CAGE CLAMP® 5 CAGE CLAMP® 0.5 – 1.5 mm / AWG 20 – 14 235-405/331-000 0.5 – 1.5 mm / AWG 20 – 16 250-513 2 x 0.5 – 1.5 mm / AWG 20 – 16 0.2 – 2.5 mm / AWG 28 – 12 250-704 804-105 235 Series 254 Series 253 Series 2 $ 2 $ 0.5 – 2.5 mm2/ AWG 20 – 14 235-405 ”sol.“ 0.5 – 2,5 mm2/ AWG 20 – 12* 254-455 ”sol.“ Feedthrough terminal blocks, 741 Series Feedthrough terminal blocks, 231 Series ° CLAMP® ° CLAMP® 0.08 – 2.5 mm / AWG 28 – 12* 741-112 2 with jumper slot 0.08 – 2.5 mm / AWG 28 – 12* 231-612/023-000 2 * AWG 12: THHN, THWN 2 5 $ 2 735 Series 5 $ 2 x 0.5–1.5 mm2 / 2 x AWG 20–16 0.5 – 1.5 mm2/ AWG 20 – 16 253-105 ”sol.“ 735-307 “sol.“ 4 236 Series 4 4 7.5 mm, 7.62 mm 745 Series 236 Series 7.5 ° CLAMP® ° CLAMP® 0.08 – 2.5 mm2/ AWG 28 – 12* 236-503 0.08 – 4 mm2/ AWG 28 – 12 745-3153 739 Series 739 Series 4 10 mm, 10.16 mm 745 Series 10 ° CLAMP® 746 Series 7.5 ° CLAMP® 0.08 – 2.5 mm2 / AWG 28 – 12* 235-603 0.08 – 4 mm2 / AWG 28 – 12 745-3202 745 Series 2706 Series 4 10 2706 Series 10 10 ° CLAMP® ° CLAMP® ° CLAMP® 2 x 0.5–10 mm / 2 x AWG 20 – 8 0.08 – 2.5 mm / AWG 28 – 12* 739-206 0.08 – 2.5 mm / AWG 28 – 12* 739-206/100-000 746-2305 745 Series 745 Series 2706 Series 4 2 2 7.5 4 2 ° CLAMP® 0.2 – 4 mm / AWG 28 – 12 745-154 0.2 – 6 mm / AWG 24 – 10 745-304 2706-104 736 Series 737 Series 2706 Series ° CLAMP® ° CLAMP® 745 Series 745 Series 745 Series 4 2706-154 255 Series 256 Series 257 Series ° CLAMP® ° CLAMP® 4 0.2 – 6 mm / AWG 24 – 10 745-354 736 Series 737 Series ° CLAMP® ° CLAMP® 0.2 – 16 mm / AWG 24 – 6 745-504/006-000 2 ° CLAMP® 0.08 – 2.5 mm2 / AWG 28 – 12* 736-706 0.08 – 2.5 mm2 / AWG 28 – 12* 737-704 255 Series 256 Series ° CLAMP® 10 ° CLAMP® 2 4 4 2 10 0.08 – 4 mm / AWG 28 – 12 745-204 ° CLAMP® 0.08 – 2.5 mm2/ AWG 28 – 12* 737-506 4 4 ° CLAMP® 2 7.5 0.5–6 mm2/ AWG 20 – 10 0.08 – 2.5 mm2/ AWG 28 – 12* 736-505 4 0.5 – 6 mm / AWG 20 – 10 2706-254 ° CLAMP® 0.5–6 mm / AWG 20 – 10 ° CLAMP® 0.5 – 6 mm / AWG 20 – 10 2706-204 2 10 2 2 ° CLAMP® 0.2 – 6 mm / AWG 24 – 10 745-1354 7.5 ° CLAMP® 2 7.5 ° CLAMP® 2 4 ° CLAMP® 4 257 Series ° CLAMP® ° CLAMP® 0.08 – 2.5 mm / AWG 28 – 12* 255-504 0.08 – 2.5 mm / AWG 28 – 12* 256-503 0.08 – 2.5 mm / AWG 28 – 12* 257-554 0.08 – 2.5 mm / AWG 28 – 12* 255-602 0.08 – 2.5 mm / AWG 28 – 12* 256-602 0.08 – 2.5 mm / AWG 28 – 12* 257-653 235 Series 250 Series 804 Series 235 Series 2716 Series 2716 Series 2 CAGE CLAMP® 2 7.5 CAGE CLAMP® 0.5 – 1.5 mm / AWG 20 – 14 235-503/331-000 0.5 –1.5 mm / AWG 20 – 16 250-606 235 Series 254 Series 2 $ 0.5 – 2.5 mm2 / AWG 20 – 14 235-503 “sol.“ Feedthrough terminal blocks, 741 Series 2 2 7.5 CAGE CLAMP® 0.2 – 2.5 mm / AWG 28 – 12 804-305 2 2 0.08 – 2.5 mm / AWG 28 – 12* 741-306 10 235 Series 254 Series $ 0.5 – 2.5 mm2 / AWG 20 – 14 235-802 “sol.“ 2 10 ° CLAMP® 1.5 – 16 mm / AWG 16 – 6 2716-104 2 ° CLAMP® 1.5 – 16 mm / AWG 16 – 6 2716-154 2 $ 0.5 – 2.5 mm2 / AWG 20 – 12 254-654 “sol.“ Feedthrough terminal blocks, 741 Series ° CLAMP® ° CLAMP® 2 CAGE CLAMP® 2 0.5 – 1.5 mm / AWG 20 – 14 235-802/331-000 2 $ 0.5 – 2.5 mm2/ AWG 20 – 12* 254-554 “sol.“ 0.08 – 2.5 mm / AWG 28 – 12* 741-505 2 Global Agency Approvals and Certifications including: UL1059; UL1977; CSA C22.2 No.158; IEC/EN 60947-7-1; IEC/EN 60998-2; and more. For Approvals information visit www.wago.us. 4 12.5 mm 745 Series 0.08 – 4 mm2 / AWG 28 – 12 745-3254 4 745 Series 4 20 mm Pinstrip connectors 252 Series 0.2 – 6 mm2 / AWG 24 – 10 745-1454 2 x 0.4–0.8 mm ∅/2 x AWG 26–20 252-105 “sol.“ 252 Series 0.2 – 6 mm / AWG 24 – 10 745-1404 4 745 Series ° CLAMP® 0.5 – 6 mm / AWG 20 – 10 2706-304 2 4 745 Series ° CLAMP® 0.2 – 16 mm / AWG 24 – 6 745-603/006-000 2 2 x 0.4–0.8 mm ∅/2 x AWG 26–20 252-155 “sol.“ 243 Series 0.2 – 16 mm / AWG 24 – 6 745-653/006-000 5.75 $ ° CLAMP® 2 3.5 $ ° CLAMP® 2 2706 Series 3.5 $ ° CLAMP® ° CLAMP® ® 4 4 15 mm 745 Series 4 x 0.4–0.8 mm ∅/4 x AWG 24–18 243-743 “sol.“ 806 Series 5 CAGE CLAMP® 2 x 0.2–1.5mm2 / 2 x AWG 24–16 806-106 2716 Series picoMAX eCOM 2091/2092 Series 3.5 5 ° CLAMP® ® 1.5 – 16 mm2 / AWG 16 – 6 2716-204 2716 Series ° CLAMP® ® 1.5 – 16 mm / AWG 16 – 6 2716-254 2 CAGE CLAMP® 7.5 0.2–2.5mm2 / 2 x AWG 24–12 2091-1176, 2091-1156 Germany WAGO Kontakttechnik Minden Tel. ++49/571/887/0 Fax ++49/571/887/169 Austria WAGO Kontakttechnik Wien Tel.++43/1/615/07/80 Fax++43/1/615/07/75 Belgium WAGO Kontakttechnik Zaventem Tel.++32/2/7/17/90/90 Fax++32/2/7/17/90/99 51290671 0888-0832/0000-0318 Printed in the United States WAGO Service Worldwide China WAGO ELECTRONIC Co. Ltd. Tianjin Tel ++86/22/59617688 Fax++86/22/59617668 England WAGO, Ltd. Rugby Tel.++44/1788/568008 Fax++44/1788/568050 France WAGO CONTACT S.A. Paris Tel.++33/148172590 Fax++33/148632520 Italy WAGO ELETTRONICA SRL Casalecchio di Reno (BO) Tel.++39/051/6132112 Fax++39/051/6272174 Japan WAGO Co. of JAPAN Ltd. Tokyo Tel.++81/3/5627/2050 Fax ++81/3/5627/2055 Poland WAGO ELWAG sp. z o. o. Wroclaw Tel.++48/71/3604670/78 Fax++48/71/3604699 Singapore WAGO Electronic Pte. Ltd. Singapore Tel.++65/62866776 Fax++65/62842425 Switzerland WAGO CONTACT SA Domdidier Tel.++41/26/676/75/86 Fax++65/26/676/75/01 Mexico WAGO Corporation Queretaro Tel. 001/800/309/5975 + 52/442/221/5946 Fax + 52/442/221/5063 Canada WAGO Corporation Tel. 800/DIN Rail (346-7245) Fax 262/255-3232 www.wago.ca WAGO Corporation N120 W19129 Freistadt Road Germantown, Wisconsin 53022 Telephone: 800 / DIN Rail (346-7245) Fax: 262 / 255-3232 info.us@wago.com www.wago.us
