“Stay Connected with Heyco” Power Components
Heyco Preassembled
Cordset Components
®
For Heyco Application Equipment, see pages 8-59 & 8-60
Tri-Tap Premold–NEMA 5-15R
• Multiple piece unit that reduces the
number of crimp connections on a
Tri-Tap extension cord from 9 down
to 3. Now you can crimp all 3 terminals
at once.
• Significantly reduce the amount of
material required for overmolding,
substantially reducing the cycle time
and cost.
• Available in assembled or
component form.
• Heyco Contacts MUST be used
in Heyco pre-molds.
• DFARS Compliant
PART DATA
PART NO.
APPLICATION TOOLING*
AWG
Crimp
Type
Color
Range
Die**
Punch
18-14
S7403
S7403SXX5
C862, C863
Female Receptacle
Black
14-10
S7400
S7400SXX5
C856, C857
* Use the Heyco Standard Applicator Die (indicated by the second “S” in the Die Part No.), page 8-59.
** “XX” represents Wire Gauge. Please specify Wire Gauge when ordering.
Anvil
C851
1.20
(30,5MM)
MOLD LINE
S7403
Components For Tri-Tap Premold
• S7403
0387 Tri-Tap Body for S7403 and S7400
(see page 8-20)
0388 Tri-Tap Cover for S7403 and S7400
(see page 8-20)
8077 Tri-Tap Blade (18-14 AWG)
8078 Tri-Tap Blade (18-14 AWG)
8092 Tri-Tap Ground (18-14 AWG)
• S7400
8075 Tri-Tap Blade (14-10 AWG)
8076 Tri-Tap Blade (14-10 AWG)
8087 Tri-Tap Ground (14-10 AWG)
4.23
(107,4mm)
1.56
(39,6mm)
.48 Ref.
(12,2mm)
S7403 & S7400
1.00
(25,4mm)
.50 Ref.
(12,7mm)
1.33
(33,8mm)
MOLD LINE
S7400
8-21
Quick
Specs
Materials
Alloy 260 Brass (70% Cu, 30% Zn. Higher Cu content resists dezincification)
6/6 Nylon
Standards
NEMA 5-15R
Voltage/Current Rating
125 Volts, 15 Amps
1-800-526-4182 • 732-286-1800 (NJ) • FAX: 732-244-8843 • www.heyco.com